Hej Ihr,
ich komm mit der Sache einfach nicht weiter... Bin ein Greenhorn. Vor ein paar Wochen frisch von W*** auf Lubuntu 18.04, 32bit, umgestiegen. Nach Anregungen aus diesem Forum nun die 64bit-Variante installiert. Meinen Wlan-Stick bekomme ich trotzdem nicht unter Kontrolle und ins Laufen. Habe es zunächst manuell probiert.
git clone https://github.com/abperiasamy/rtl8812AU_8821AU_linux.git cd rtl8812AU_8821AU_linux sudo make -f Makefile.dkms install
Später, da es nicht funktionierte mit der install.sh-Datei des Sticks probiert. Haut aber alles nicht hin. Hat einer ne Idee, woran es liegen könnte? Wo liegt der Hund begraben? Bin für Eure Hilfe sehr dankbar! Grüße, Moses
uname -a
Linux mk-desktop 5.3.0-40-generic #32~18.04.1-Ubuntu SMP Mon Feb 3 14:05:59 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
lsusb
Bus 001 Device 004: ID 04f9:015f Brother Industries, Ltd MFC-8440 Bus 001 Device 003: ID 0bda:a811 Realtek Semiconductor Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 1267:0210 Logic3 / SpectraVideo plc LG Optical Mouse 3D-310 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
dkms status
rtl8812au, 4.3.14, 5.0.0-23-generic, x86_64: installed rtl8812au, 4.3.14, 5.3.0-40-generic, x86_64: installed
usb-devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=05.03 S: Manufacturer=Linux 5.3.0-40-generic ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:1d.7 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=01 Prnt=01 Port=06 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=a811 Rev=02.00 S: Manufacturer=Realtek S: Product=802.11ac WLAN Adapter S: SerialNumber=00e04c000001 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 6 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=04f9 ProdID=015f Rev=01.00 S: SerialNumber=000J5J573927 C: #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=05.03 S: Manufacturer=Linux 5.3.0-40-generic uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=05.03 S: Manufacturer=Linux 5.3.0-40-generic uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.1 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=05.03 S: Manufacturer=Linux 5.3.0-40-generic uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.2 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=1267 ProdID=0210 Rev=00.01 S: Product=PS/2+USB Mouse C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=05.03 S: Manufacturer=Linux 5.3.0-40-generic uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.3 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
~$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: enp1s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN mode DEFAULT group default qlen 1000 link/ether 00:19:66:e3:2f:34 brd ff:ff:ff:ff:ff:ff
iwconfig
enp1s0 no wireless extensions. lo no wireless extensions.
lsmod
Module Size Used by nls_utf8 16384 1 isofs 49152 1 rtl8812au 1351680 0 usblp 24576 0 cfg80211 704512 1 rtl8812au i915 1937408 4 snd_hda_codec_realtek 118784 1 snd_hda_codec_generic 81920 1 snd_hda_codec_realtek ledtrig_audio 16384 2 snd_hda_codec_generic,snd_hda_codec_realtek coretemp 20480 0 gpio_ich 16384 0 video 49152 1 i915 input_leds 16384 0 drm_kms_helper 180224 1 i915 drm 491520 6 drm_kms_helper,i915 serio_raw 20480 0 snd_hda_intel 49152 3 snd_hda_codec 131072 3 snd_hda_codec_generic,snd_hda_intel,snd_hda_codec_realtek i2c_algo_bit 16384 1 i915 fb_sys_fops 16384 1 drm_kms_helper snd_hda_core 90112 4 snd_hda_codec_generic,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek snd_hwdep 20480 1 snd_hda_codec syscopyarea 16384 1 drm_kms_helper sysfillrect 16384 1 drm_kms_helper snd_pcm 102400 3 snd_hda_intel,snd_hda_codec,snd_hda_core sysimgblt 16384 1 drm_kms_helper lpc_ich 24576 0 snd_timer 36864 1 snd_pcm snd 86016 13 snd_hda_codec_generic,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm soundcore 16384 1 snd mac_hid 16384 0 sch_fq_codel 20480 2 parport_pc 40960 1 ppdev 24576 0 lp 20480 0 parport 53248 3 parport_pc,lp,ppdev ip_tables 32768 0 x_tables 40960 1 ip_tables autofs4 45056 2 r8169 81920 0 psmouse 151552 0 pata_acpi 16384 0 realtek 20480 1 hid_generic 16384 0 usbhid 53248 0 hid 131072 2 usbhid,hid_generic
iwlist chan
enp1s0 no frequency information. lo no frequency information.
sudo lshw -class network
*-network Beschreibung: Ethernet interface Produkt: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller Hersteller: Realtek Semiconductor Co., Ltd. Physische ID: 0 Bus-Informationen: pci@0000:01:00.0 Logischer Name: enp1s0 Version: 03 Seriennummer: 00:19:66:e3:2f:34 Kapazität: 1Gbit/s Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation Konfiguration: autonegotiation=on broadcast=yes driver=r8169 firmware=rtl_nic/rtl8168d-1.fw latency=0 link=no multicast=yes port=MII Ressourcen: irq:17 ioport:e800(Größe=256) memory:fdeff000-fdefffff memory:fdef8000-fdefbfff memory:febe0000-febfffff
lscpu
Architektur: x86_64 CPU Operationsmodus: 32-bit, 64-bit Byte-Reihenfolge: Little Endian CPU(s): 4 Liste der Online-CPU(s): 0-3 Thread(s) pro Kern: 2 Kern(e) pro Socket: 2 Sockel: 1 NUMA-Knoten: 1 Anbieterkennung: GenuineIntel Prozessorfamilie: 6 Modell: 28 Modellname: Intel(R) Atom(TM) CPU 330 @ 1.60GHz Stepping: 2 CPU MHz: 1595.562 BogoMIPS: 3191.16 L1d Cache: 24K L1i Cache: 32K L2 Cache: 512K NUMA-Knoten0 CPU(s): 0-3 Markierungen: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts nopl cpuid aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm dtherm