|
Anmeldungsdatum: Beiträge: 15 |
Servus zusammen. Mein Kubuntu 18.04 startet leider nicht mehr. Ich bekomme nur angehängte Meldung angezeigt. Der Neustart wurde erforderlich weil ich auf dem System keine Schreibrechte mehr hatte, ich konnte weder Aktualisierungen herunterladen noch z.B. ein PDF ablegen. Weiß jemand Rat? Besonders erfahren bin ich in Sachen Linux leider nicht. Edit: der dateiupload funktioniert leider nicht. Der Fehler lautet: MP-BIOS BUG: 8254 timer not connected to IO-APIC |
|
Anmeldungsdatum: Beiträge: 12067 |
Hallo! Anhänge sehe ich keine. Wie lautet die Meldung denn? |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 15 |
Der Fehler lautet: MP-BIOS BUG: 8254 timer not connected to IO-APIC |
|
Anmeldungsdatum: Beiträge: 12067 |
Da scheint was mit der Uhr nicht zu stimmen. Was für ein Gerät ist das denn? Älteres Modell? Versuche mal über Bootoptionen zu starten. noapic könnte helfen. Falls du dann ins System kommst, bitte die Ausgaben von |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 15 |
Es handelt sich um ein ASUS-Notebook, hat schon ein paar Jahre auf dem Buckel. Aktuell bootet es auch sehr langsam, sowohl Kubuntu als auch Win10 benötig(t)en ca 20 Minuten bis man damit arbeiten kann. Dieses Verhalten hatte ich vor ein paar Wochen schon mal, hat sich dann allerdings nach ein paar Tagen in Wohlgefallen aufgelöst... |
|
Supporter
Anmeldungsdatum: Beiträge: 55507 Wohnort: Berlin |
Ach DAS! Bekanntlich gibt es ja ASUS nur das eine ältere Modell und das eine aktuelle. Ist es wirklich so verdammt schwer, eine vernünftige Hardware-Beschreibung zu liefern? Der Name des Modells steht ja schließlich schonmal auf dem Gerät...
Das klingt doch stark nach Hardware. Festplattenstatus von einem Livesystem aus prüfen, memtest schadet sicher auch nicht. |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 15 |
Das Problem ist gelöst, ich hab das System im Recovery-Mode gestartet. Dabei kam zur Anzeige dass eine Partition einen Fehler hat und es empfohlen wird fcsk auszuführen. Gut dass das mit meinen Laienkenntnissen kein Problem war, anschließend startete das System ohne Probleme und auch in normaler Geschwindigkeit. Der Vollständigkeit halber hier noch die Ausgaben von dmesg: 0051117)
[ 0.015585] ACPI: SSDT 0x00000000D89A2360 000776 (v01 SgRef SgTabl 00001000 INTL 20051117)
[ 0.015588] ACPI: SLIC 0x00000000D89A2AD8 000176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001)
[ 0.015599] ACPI: Local APIC address 0xfee00000
[ 0.015688] No NUMA configuration found
[ 0.015689] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[ 0.015700] NODE_DATA(0) allocated [mem 0x11fdd3000-0x11fdfdfff]
[ 0.015952] Zone ranges:
[ 0.015953] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.015954] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.015955] Normal [mem 0x0000000100000000-0x000000011fdfffff]
[ 0.015956] Device empty
[ 0.015957] Movable zone start for each node
[ 0.015960] Early memory node ranges
[ 0.015961] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.015962] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.015963] node 0: [mem 0x0000000020200000-0x0000000040003fff]
[ 0.015963] node 0: [mem 0x0000000040005000-0x00000000d84fcfff]
[ 0.015964] node 0: [mem 0x00000000d97f6000-0x00000000d97f6fff]
[ 0.015965] node 0: [mem 0x00000000d983a000-0x00000000d9c42fff]
[ 0.015966] node 0: [mem 0x00000000d9ff4000-0x00000000d9ffffff]
[ 0.015966] node 0: [mem 0x0000000100000000-0x000000011fdfffff]
[ 0.016281] Zeroed struct page in unavailable ranges: 31568 pages
[ 0.016282] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fdfffff]
[ 0.016284] On node 0 totalpages: 1017008
[ 0.016285] DMA zone: 64 pages used for memmap
[ 0.016285] DMA zone: 25 pages reserved
[ 0.016286] DMA zone: 3998 pages, LIFO batch:0
[ 0.016348] DMA32 zone: 13789 pages used for memmap
[ 0.016349] DMA32 zone: 882450 pages, LIFO batch:63
[ 0.030640] Normal zone: 2040 pages used for memmap
[ 0.030642] Normal zone: 130560 pages, LIFO batch:31
[ 0.032600] Reserving Intel graphics memory at [mem 0xdb200000-0xdf1fffff]
[ 0.032750] ACPI: PM-Timer IO Port: 0x408
[ 0.032752] ACPI: Local APIC address 0xfee00000
[ 0.032760] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.032772] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.032774] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.032775] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.032777] ACPI: IRQ0 used by override.
[ 0.032778] ACPI: IRQ9 used by override.
[ 0.032780] Using ACPI (MADT) for SMP configuration information
[ 0.032781] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.032786] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.032812] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.032814] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.032814] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.032816] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.032818] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.032820] PM: Registered nosave memory: [mem 0x8d7f0000-0x8d7f0fff]
[ 0.032822] PM: Registered nosave memory: [mem 0x8d7fc000-0x8d7fcfff]
[ 0.032822] PM: Registered nosave memory: [mem 0x8d7fd000-0x8d7fdfff]
[ 0.032824] PM: Registered nosave memory: [mem 0x8d80d000-0x8d80dfff]
[ 0.032826] PM: Registered nosave memory: [mem 0xd84fd000-0xd898cfff]
[ 0.032826] PM: Registered nosave memory: [mem 0xd898d000-0xd89a2fff]
[ 0.032827] PM: Registered nosave memory: [mem 0xd89a3000-0xd8fedfff]
[ 0.032827] PM: Registered nosave memory: [mem 0xd8fee000-0xd97f5fff]
[ 0.032829] PM: Registered nosave memory: [mem 0xd97f7000-0xd9839fff]
[ 0.032831] PM: Registered nosave memory: [mem 0xd9c43000-0xd9ff3fff]
[ 0.032833] PM: Registered nosave memory: [mem 0xda000000-0xdaffffff]
[ 0.032834] PM: Registered nosave memory: [mem 0xdb000000-0xdf1fffff]
[ 0.032834] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.032835] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.032835] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.032836] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.032836] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.032837] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.032837] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.032838] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.032839] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.032839] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.032840] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.032840] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.032842] [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.032844] Booting paravirtualized kernel on bare hardware
[ 0.032847] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.032854] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.033162] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[ 0.033170] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[ 0.033171] pcpu-alloc: [0] 0 1 2 3
[ 0.033205] Built 1 zonelists, mobility grouping on. Total pages: 1001090
[ 0.033206] Policy zone: Normal
[ 0.033207] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-42-generic root=UUID=c79ba19b-1b2b-44c4-b425-3fe318fc8f16 ro quiet splash
[ 0.033644] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.033824] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.033881] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.039600] Calgary: detecting Calgary via BIOS EBDA area
[ 0.039602] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.054204] Memory: 3613420K/4068032K available (14339K kernel code, 2378K rwdata, 4924K rodata, 2704K init, 5020K bss, 454612K reserved, 0K cma-reserved)
[ 0.054211] random: get_random_u64 called from __kmem_cache_create+0x41/0x550 with crng_init=0
[ 0.054354] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.054368] Kernel/User page tables isolation: enabled
[ 0.054384] ftrace: allocating 44191 entries in 173 pages
[ 0.073795] rcu: Hierarchical RCU implementation.
[ 0.073796] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.073797] Tasks RCU enabled.
[ 0.073798] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.073798] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.077017] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.077265] Console: colour dummy device 80x25
[ 0.077270] printk: console [tty0] enabled
[ 0.077288] ACPI: Core revision 20190816
[ 0.077446] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.077462] APIC: Switch to symmetric I/O mode setup
[ 0.077533] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.077932] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.097464] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x228374dae5d, max_idle_ns: 440795268352 ns
[ 0.097468] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.74 BogoMIPS (lpj=9577496)
[ 0.097470] pid_max: default: 32768 minimum: 301
[ 0.104463] LSM: Security Framework initializing
[ 0.104476] Yama: becoming mindful.
[ 0.104511] AppArmor: AppArmor initialized
[ 0.104556] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.104568] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.104586] *** VALIDATE tmpfs ***
[ 0.104758] *** VALIDATE proc ***
[ 0.104818] *** VALIDATE cgroup1 ***
[ 0.104820] *** VALIDATE cgroup2 ***
[ 0.104874] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.104884] process: using mwait in idle threads
[ 0.104887] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.104888] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.104891] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.104893] Spectre V2 : Mitigation: Full generic retpoline
[ 0.104893] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.104894] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.104895] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.104896] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.104897] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.104900] MDS: Mitigation: Clear CPU buffers
[ 0.105082] Freeing SMP alternatives memory: 40K
[ 0.107848] smpboot: CPU0: Intel(R) Core(TM) i3-3110M CPU @ 2.40GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.107956] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.107963] ... version: 3
[ 0.107963] ... bit width: 48
[ 0.107964] ... generic registers: 4
[ 0.107964] ... value mask: 0000ffffffffffff
[ 0.107965] ... max period: 00007fffffffffff
[ 0.107965] ... fixed-purpose events: 3
[ 0.107966] ... event mask: 000000070000000f
[ 0.108008] rcu: Hierarchical SRCU implementation.
[ 0.109012] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.109072] smp: Bringing up secondary CPUs ...
[ 0.109183] x86: Booting SMP configuration:
[ 0.109184] .... node #0, CPUs: #1 #2
[ 0.111914] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.111914] #3
[ 0.113526] smp: Brought up 1 node, 4 CPUs
[ 0.113526] smpboot: Max logical packages: 1
[ 0.113526] smpboot: Total of 4 processors activated (19154.99 BogoMIPS)
[ 0.114903] devtmpfs: initialized
[ 0.114903] x86/mm: Memory block size: 128MB
[ 0.114903] PM: Registering ACPI NVS region [mem 0xd89a3000-0xd8fedfff] (6598656 bytes)
[ 0.114903] PM: Registering ACPI NVS region [mem 0xd97f7000-0xd9839fff] (274432 bytes)
[ 0.114903] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.114903] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.114903] pinctrl core: initialized pinctrl subsystem
[ 0.114903] PM: RTC time: 16:50:23, date: 2020-08-26
[ 0.114903] NET: Registered protocol family 16
[ 0.114903] audit: initializing netlink subsys (disabled)
[ 0.114903] audit: type=2000 audit(1598460623.036:1): state=initialized audit_enabled=0 res=1
[ 0.114903] EISA bus registered
[ 0.114903] cpuidle: using governor ladder
[ 0.114903] cpuidle: using governor menu
[ 0.114903] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.114903] ACPI: bus type PCI registered
[ 0.114903] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.114903] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.114903] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.114903] PCI: Using configuration type 1 for base access
[ 0.114903] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.114903] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.118012] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.118012] ACPI: Added _OSI(Module Device)
[ 0.118012] ACPI: Added _OSI(Processor Device)
[ 0.118012] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.118012] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.118012] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.118012] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.118012] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.131759] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.134211] ACPI: Dynamic OEM Table Load:
[ 0.134219] ACPI: SSDT 0xFFFF8DCADAF68000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.137895] ACPI: Dynamic OEM Table Load:
[ 0.137900] ACPI: SSDT 0xFFFF8DCADA4EF400 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.138951] ACPI: Dynamic OEM Table Load:
[ 0.138954] ACPI: SSDT 0xFFFF8DCADA72FC00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.140853] ACPI: EC: EC started
[ 0.140854] ACPI: EC: interrupt blocked
[ 0.141563] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.141565] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.141566] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[ 0.141567] ACPI: Interpreter enabled
[ 0.141594] ACPI: (supports S0 S3 S4 S5)
[ 0.141595] ACPI: Using IOAPIC for interrupt routing
[ 0.141629] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.142002] ACPI: Enabled 16 GPEs in block 00 to 3F
[ 0.153447] ACPI: Power Resource [FN00] (off)
[ 0.153552] ACPI: Power Resource [FN01] (off)
[ 0.153654] ACPI: Power Resource [FN02] (off)
[ 0.153757] ACPI: Power Resource [FN03] (off)
[ 0.153860] ACPI: Power Resource [FN04] (off)
[ 0.154764] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.154770] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.155093] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 0.155358] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[ 0.155359] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.156163] PCI host bridge to bus 0000:00
[ 0.156165] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.156166] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.156167] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.156168] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.156170] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.156171] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.156172] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[ 0.156173] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.156183] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.156307] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.156348] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.156469] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.156480] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.156485] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.156489] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.156501] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.156661] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.156687] pci 0000:00:16.0: reg 0x10: [mem 0xf7d0a000-0xf7d0a00f 64bit]
[ 0.156766] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.156880] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.156902] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d08000-0xf7d083ff]
[ 0.156989] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.157113] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.157133] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d00000-0xf7d03fff 64bit]
[ 0.157201] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.157322] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.157421] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.157549] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.157648] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.157780] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.157802] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d07000-0xf7d073ff]
[ 0.157889] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.158010] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.158230] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.158248] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.158256] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.158264] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.158272] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.158279] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.158287] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d06000-0xf7d067ff]
[ 0.158330] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.158449] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.158469] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d05000-0xf7d050ff 64bit]
[ 0.158489] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.158658] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.158782] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.158910] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.159032] pci 0000:02:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 0.159107] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.159556] pci 0000:02:00.0: supports D1 D2
[ 0.159557] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.159918] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.159922] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.159926] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.160016] pci 0000:03:00.0: [168c:0034] type 00 class 0x028000
[ 0.160068] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c7ffff 64bit]
[ 0.160129] pci 0000:03:00.0: reg 0x30: [mem 0xf7c80000-0xf7c8ffff pref]
[ 0.160276] pci 0000:03:00.0: supports D1
[ 0.160277] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.160448] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.160454] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.241853] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.241938] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.242019] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.242101] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.242181] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.242263] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.242347] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.242429] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.242934] ACPI: EC: interrupt unblocked
[ 0.242944] ACPI: EC: event unblocked
[ 0.242951] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.242953] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[ 0.243049] iommu: Default domain type: Translated
[ 0.243049] SCSI subsystem initialized
[ 0.243049] libata version 3.00 loaded.
[ 0.243049] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.243049] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.243049] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.243049] vgaarb: loaded
[ 0.243049] ACPI: bus type USB registered
[ 0.243049] usbcore: registered new interface driver usbfs
[ 0.243049] usbcore: registered new interface driver hub
[ 0.243049] usbcore: registered new device driver usb
[ 0.243049] pps_core: LinuxPPS API ver. 1 registered
[ 0.243049] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.243049] PTP clock support registered
[ 0.243049] EDAC MC: Ver: 3.0.0
[ 0.243049] Registered efivars operations
[ 0.243049] PCI: Using ACPI for IRQ routing
[ 0.243049] PCI: pci_cache_line_size set to 64 bytes
[ 0.243090] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.243091] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.243092] e820: reserve RAM buffer [mem 0x8d7f0018-0x8fffffff]
[ 0.243093] e820: reserve RAM buffer [mem 0x8d7fd018-0x8fffffff]
[ 0.243094] e820: reserve RAM buffer [mem 0xd84fd000-0xdbffffff]
[ 0.243095] e820: reserve RAM buffer [mem 0xd97f7000-0xdbffffff]
[ 0.243097] e820: reserve RAM buffer [mem 0xd9c43000-0xdbffffff]
[ 0.243098] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
[ 0.243099] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[ 0.243211] NetLabel: Initializing
[ 0.243212] NetLabel: domain hash size = 128
[ 0.243212] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.243228] NetLabel: unlabeled traffic allowed by default
[ 0.246096] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.246100] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.246492] clocksource: Switched to clocksource tsc-early
[ 0.258911] *** VALIDATE bpf ***
[ 0.258996] VFS: Disk quotas dquot_6.6.0
[ 0.259014] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.259043] *** VALIDATE ramfs ***
[ 0.259047] *** VALIDATE hugetlbfs ***
[ 0.259131] AppArmor: AppArmor Filesystem Enabled
[ 0.259164] pnp: PnP ACPI init
[ 0.259313] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.259319] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.259427] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.259429] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.259430] system 00:01: [io 0xffff] has been reserved
[ 0.259431] system 00:01: [io 0xffff] has been reserved
[ 0.259433] system 00:01: [io 0x0400-0x0453] has been reserved
[ 0.259434] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.259435] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.259436] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.259440] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.259466] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.259529] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.259533] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.259596] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.259598] system 00:04: [mem 0xff000000-0xff000fff] has been reserved
[ 0.259602] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.259678] pnp 00:05: Plug and Play ACPI device, IDs ETD010a PNP0f13 (active)
[ 0.259722] pnp 00:06: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.345845] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.345847] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.345848] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.345849] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.345851] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.345852] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.345853] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.345855] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.345856] system 00:07: [mem 0xff010000-0xffffffff] has been reserved
[ 0.345858] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.345859] system 00:07: [mem 0xdf200000-0xdf200fff] has been reserved
[ 0.345863] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.346089] system 00:08: [mem 0x20000000-0x201fffff] has been reserved
[ 0.346090] system 00:08: [mem 0x40004000-0x40004fff] has been reserved
[ 0.346093] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.346157] pnp: PnP ACPI: found 9 devices
[ 0.347500] thermal_sys: Registered thermal governor 'fair_share'
[ 0.347501] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.347501] thermal_sys: Registered thermal governor 'step_wise'
[ 0.347502] thermal_sys: Registered thermal governor 'user_space'
[ 0.347503] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.352001] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.352041] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.352047] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.352050] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.352055] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.352063] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.352068] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.352077] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.352079] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.352080] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.352081] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.352082] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.352083] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
[ 0.352084] pci_bus 0000:00: resource 10 [mem 0xdf200000-0xfeafffff window]
[ 0.352086] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.352087] pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf00fffff]
[ 0.352088] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.352238] NET: Registered protocol family 2
[ 0.352407] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.352436] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.352525] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.352606] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.352637] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.352654] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.352700] NET: Registered protocol family 1
[ 0.352705] NET: Registered protocol family 44
[ 0.352716] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.373617] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6b0 took 20401 usecs
[ 0.397608] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6b0 took 23411 usecs
[ 0.397630] pci 0000:03:00.0: CLS mismatch (64 != 32), using 64 bytes
[ 0.397672] Trying to unpack rootfs image as initramfs...
[ 1.322456] Freeing initrd memory: 63100K
[ 1.322476] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.322478] software IO TLB: mapped [mem 0xc6dd9000-0xcadd9000] (64MB)
[ 1.322701] check: Scanning for low memory corruption every 60 seconds
[ 1.324186] Initialise system trusted keyrings
[ 1.324194] Key type blacklist registered
[ 1.324227] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 1.325595] zbud: loaded
[ 1.325969] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.326128] fuse: init (API version 7.31)
[ 1.326145] *** VALIDATE fuse ***
[ 1.326146] *** VALIDATE fuse ***
[ 1.326238] Platform Keyring initialized
[ 1.331622] Key type asymmetric registered
[ 1.331623] Asymmetric key parser 'x509' registered
[ 1.331631] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 1.331671] io scheduler mq-deadline registered
[ 1.332361] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.332420] efifb: probing for efifb
[ 1.332431] efifb: No BGRT, not showing boot graphics
[ 1.332432] efifb: framebuffer at 0xe0000000, using 4128k, total 4128k
[ 1.332433] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 1.332434] efifb: scrolling: redraw
[ 1.332435] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.332479] fbcon: Deferring console take-over
[ 1.332480] fb0: EFI VGA frame buffer device
[ 1.332488] intel_idle: MWAIT substates: 0x21120
[ 1.332488] intel_idle: v0.4.1 model 0x3A
[ 1.332684] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.413671] ACPI: AC Adapter [ACAD] (on-line)
[ 1.413789] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.413811] ACPI: Power Button [PWRB]
[ 1.413854] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 1.413904] ACPI: Lid Switch [LID0]
[ 1.413944] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 1.413966] ACPI: Sleep Button [SLPB]
[ 1.414003] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.414043] ACPI: Power Button [PWRF]
[ 1.415207] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.415209] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.415453] [Firmware Bug]: Invalid critical threshold (2732)
[ 1.415744] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.415745] ACPI: Thermal Zone [TZ01] (64 C)
[ 1.415972] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.418200] Linux agpgart interface v0.103
[ 1.420037] loop: module loaded
[ 1.420244] libphy: Fixed MDIO Bus: probed
[ 1.420245] tun: Universal TUN/TAP device driver, 1.6
[ 1.420270] PPP generic driver version 2.4.2
[ 1.420321] VFIO - User Level meta-driver version: 0.3
[ 1.420404] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.420412] ehci-pci: EHCI PCI platform driver
[ 1.420586] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.420593] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.420606] ehci-pci 0000:00:1a.0: debug port 2
[ 1.424528] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.424543] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d08000
[ 1.437567] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.437922] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 1.437925] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.437926] usb usb1: Product: EHCI Host Controller
[ 1.437927] usb usb1: Manufacturer: Linux 5.4.0-42-generic ehci_hcd
[ 1.437928] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.438190] hub 1-0:1.0: USB hub found
[ 1.438237] hub 1-0:1.0: 2 ports detected
[ 1.438689] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.438694] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.438707] ehci-pci 0000:00:1d.0: debug port 2
[ 1.442626] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.442641] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d07000
[ 1.457566] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.457658] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 1.457660] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.457661] usb usb2: Product: EHCI Host Controller
[ 1.457662] usb usb2: Manufacturer: Linux 5.4.0-42-generic ehci_hcd
[ 1.457663] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.457923] hub 2-0:1.0: USB hub found
[ 1.457935] hub 2-0:1.0: 2 ports detected
[ 1.458180] ehci-platform: EHCI generic platform driver
[ 1.458200] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.458207] ohci-pci: OHCI PCI platform driver
[ 1.458219] ohci-platform: OHCI generic platform driver
[ 1.458229] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.458304] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.469581] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.469585] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.469885] mousedev: PS/2 mouse device common for all mice
[ 1.470423] rtc_cmos 00:02: RTC can wake from S4
[ 1.470607] rtc_cmos 00:02: registered as rtc0
[ 1.470621] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.470629] i2c /dev entries driver
[ 1.470675] device-mapper: uevent: version 1.0.3
[ 1.470740] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 1.470757] platform eisa.0: Probing EISA bus 0
[ 1.470758] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.470760] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.470761] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.470762] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.470763] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.470764] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.470765] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.470766] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.470767] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.470768] platform eisa.0: EISA: Detected 0 cards
[ 1.470773] intel_pstate: Intel P-state driver initializing
[ 1.471062] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.471064] EFI Variables Facility v0.08 2004-May-17
[ 1.483041] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.487677] drop_monitor: Initializing network drop monitor service
[ 1.487853] NET: Registered protocol family 10
[ 1.494876] Segment Routing with IPv6
[ 1.494902] NET: Registered protocol family 17
[ 1.494969] Key type dns_resolver registered
[ 1.495268] RAS: Correctable Errors collector initialized.
[ 1.495302] microcode: sig=0x306a9, pf=0x10, revision=0x21
[ 1.495398] microcode: Microcode Update Driver: v2.2.
[ 1.495403] IPI shorthand broadcast: enabled
[ 1.495410] sched_clock: Marking stable (1495137284, 256884)->(1502505345, -7111177)
[ 1.495502] registered taskstats version 1
[ 1.495511] Loading compiled-in X.509 certificates
[ 1.497362] Loaded X.509 cert 'Build time autogenerated kernel key: 48ee52262915d1ee4db3e3222acce2ebb1a0fb65'
[ 1.497393] zswap: loaded using pool lzo/zbud
[ 1.497463] Key type ._fscrypt registered
[ 1.497464] Key type .fscrypt registered
[ 1.503023] Key type big_key registered
[ 1.505745] Key type encrypted registered
[ 1.505750] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.506535] integrity: Loading X.509 certificate: UEFI:db
[ 1.507799] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
[ 1.507800] integrity: Loading X.509 certificate: UEFI:db
[ 1.508069] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
[ 1.508070] integrity: Loading X.509 certificate: UEFI:db
[ 1.508093] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 1.508094] integrity: Loading X.509 certificate: UEFI:db
[ 1.508114] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 1.508115] integrity: Loading X.509 certificate: UEFI:db
[ 1.508385] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[ 1.509197] ima: No TPM chip found, activating TPM-bypass!
[ 1.509201] ima: Allocated hash algorithm: sha1
[ 1.509208] ima: No architecture policies found
[ 1.509218] evm: Initialising EVM extended attributes:
[ 1.509219] evm: security.selinux
[ 1.509220] evm: security.SMACK64
[ 1.509220] evm: security.SMACK64EXEC
[ 1.509221] evm: security.SMACK64TRANSMUTE
[ 1.509221] evm: security.SMACK64MMAP
[ 1.509222] evm: security.apparmor
[ 1.509222] evm: security.ima
[ 1.509222] evm: security.capability
[ 1.509223] evm: HMAC attrs: 0x1
[ 1.509636] PM: Magic number: 0:452:844
[ 1.509760] rtc_cmos 00:02: setting system clock to 2020-08-26T16:50:25 UTC (1598460625)
[ 1.693624] battery: [Firmware Bug]: battery: (dis)charge rate invalid.
[ 1.693706] battery: ACPI: Battery Slot [BAT1] (battery present)
[ 1.695091] Freeing unused decrypted memory: 2040K
[ 1.695537] Freeing unused kernel image memory: 2704K
[ 1.695594] Write protecting the kernel read-only data: 22528k
[ 1.696093] Freeing unused kernel image memory: 2008K
[ 1.696368] Freeing unused kernel image memory: 1220K
[ 1.707731] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.707732] x86/mm: Checking user space page tables
[ 1.718991] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.718993] Run /init as init process
[ 1.773489] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.793492] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.933928] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.933941] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.934326] hub 1-1:1.0: USB hub found
[ 1.934379] hub 1-1:1.0: 6 ports detected
[ 1.949974] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.949976] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.950500] hub 2-1:1.0: USB hub found
[ 1.950661] hub 2-1:1.0: 6 ports detected
[ 1.992752] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.995532] ahci 0000:00:1f.2: version 3.0
[ 1.995805] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.996708] libphy: r8169: probed
[ 1.997272] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl, 60:a4:4c:7b:3f:fb, XID 2c9, IRQ 27
[ 1.997275] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.006178] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 2.006182] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[ 2.017872] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 2.018496] scsi host0: ahci
[ 2.018645] scsi host1: ahci
[ 2.018792] scsi host2: ahci
[ 2.018895] scsi host3: ahci
[ 2.019016] scsi host4: ahci
[ 2.019131] scsi host5: ahci
[ 2.019182] ata1: SATA max UDMA/133 abar m2048@0xf7d06000 port 0xf7d06100 irq 28
[ 2.019183] ata2: DUMMY
[ 2.019186] ata3: SATA max UDMA/133 abar m2048@0xf7d06000 port 0xf7d06200 irq 28
[ 2.019186] ata4: DUMMY
[ 2.019187] ata5: DUMMY
[ 2.019188] ata6: DUMMY
[ 2.083979] checking generic (e0000000 408000) vs hw (e0000000 10000000)
[ 2.083980] fb0: switching to inteldrmfb from EFI VGA
[ 2.084046] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 2.085245] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.085246] [drm] Driver supports precise vblank timestamp query.
[ 2.086114] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.110296] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[ 2.111400] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.111924] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[ 2.124132] fbcon: i915drmfb (fb0) is primary device
[ 2.124132] fbcon: Deferring console take-over
[ 2.124135] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 2.221504] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[ 2.237504] usb 2-1.4: new high-speed USB device number 3 using ehci-pci
[ 2.332026] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.332402] usb 1-1.3: string descriptor 0 read error: -22
[ 2.332405] usb 1-1.3: New USB device found, idVendor=13d3, idProduct=3393, bcdDevice= 0.01
[ 2.332407] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.341603] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.341608] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.341611] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.342238] ata1.00: ATA-8: ST500LT012-9WS142, 0001SDM1, max UDMA/133
[ 2.342242] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
[ 2.349506] tsc: Refined TSC clocksource calibration: 2394.561 MHz
[ 2.349518] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22842564e28, max_idle_ns: 440795246705 ns
[ 2.349550] clocksource: Switched to clocksource tsc
[ 2.358522] usb 2-1.4: New USB device found, idVendor=0bda, idProduct=0138, bcdDevice=38.82
[ 2.358523] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.358525] usb 2-1.4: Product: USB2.0-CRW
[ 2.358526] usb 2-1.4: Manufacturer: Generic
[ 2.358527] usb 2-1.4: SerialNumber: 20090516388200000
[ 2.367600] usbcore: registered new interface driver usb-storage
[ 2.369039] usbcore: registered new interface driver uas
[ 2.370291] ums-realtek 2-1.4:1.0: USB Mass Storage device detected
[ 2.374135] scsi host6: usb-storage 2-1.4:1.0
[ 2.374238] usbcore: registered new interface driver ums-realtek
[ 2.387765] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.387770] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.387773] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.388401] ata1.00: configured for UDMA/133
[ 2.388805] scsi 0:0:0:0: Direct-Access ATA ST500LT012-9WS14 SDM1 PQ: 0 ANSI: 5
[ 2.389121] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.389201] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 2.389204] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.389224] sd 0:0:0:0: [sda] Write Protect is off
[ 2.389228] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.389263] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.409485] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[ 2.449359] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 2.450611] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.540193] random: fast init done
[ 2.625160] usb 1-1.4: New USB device found, idVendor=1bcf, idProduct=2883, bcdDevice= 4.29
[ 2.625162] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.625164] usb 1-1.4: Product: ASUS USB2.0 Webcam
[ 2.625165] usb 1-1.4: Manufacturer: 04G626000611BQ2CH0015JC
[ 2.625413] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.625428] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.625496] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.704972] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.706847] ata3.00: ATAPI: MATSHITADVD-RAM UJ8C0, 1.00, max UDMA/133
[ 2.710305] ata3.00: configured for UDMA/133
[ 2.713192] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C0 1.00 PQ: 0 ANSI: 5
[ 2.771695] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.771697] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.786018] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.786236] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 3.075419] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f01)
[ 3.097048] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0c.
[ 3.117929] psmouse serio1: elantech: Elan sample query result 03, 23, 75
[ 3.228119] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[ 3.408379] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 3.408617] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 3.439206] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 4.137133] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 5.773590] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 5.793770] systemd[1]: Detected architecture x86-64.
[ 5.821585] random: crng init done
[ 5.821589] random: 7 urandom warning(s) missed due to ratelimiting
[ 5.821639] systemd[1]: Set hostname to <alexandra-P45VA>.
[ 7.913514] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.913571] systemd[1]: Reached target Remote File Systems.
[ 7.913782] systemd[1]: Created slice User and Session Slice.
[ 7.914000] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.914157] systemd[1]: Created slice System Slice.
[ 7.914249] systemd[1]: Listening on Syslog Socket.
[ 7.914304] systemd[1]: Listening on udev Kernel Socket.
[ 8.183092] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[ 8.250619] systemd-journald[399]: Received request to flush runtime journal from PID 1
[ 8.485384] lp: driver loaded but no devices found
[ 8.489165] ppdev: user-space parallel port driver
[ 8.517577] Adding 1338644k swap on /swapfile. Priority:-2 extents:5 across:1371412k FS
[ 8.735727] systemd-journald[399]: File /var/log/journal/d4ac7a23be804d3f9f70f814325b0218/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 10.606247] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input8
[ 10.946081] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190816/utaddress-213)
[ 10.946090] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.946094] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20190816/utaddress-213)
[ 10.946100] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-213)
[ 10.946105] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.946106] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20190816/utaddress-213)
[ 10.946111] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-213)
[ 10.946116] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.946117] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20190816/utaddress-213)
[ 10.946122] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-213)
[ 10.946126] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.946127] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 11.050095] asus_wmi: ASUS WMI generic driver loaded
[ 11.083781] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 11.084195] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 11.116311] asus_wmi: Initialization: 0x1
[ 11.116439] asus_wmi: BIOS WMI version: 7.8
[ 11.116526] asus_wmi: SFUN value: 0x4a0077
[ 11.116529] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
[ 11.116531] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
[ 11.120167] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 11.120169] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 11.120170] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 11.120171] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 11.121394] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input9
[ 11.190370] cryptd: max_cpu_qlen set to 1000
[ 11.382397] Bluetooth: Core ver 2.22
[ 11.382416] NET: Registered protocol family 31
[ 11.382417] Bluetooth: HCI device and connection manager initialized
[ 11.382421] Bluetooth: HCI socket layer initialized
[ 11.382423] Bluetooth: L2CAP socket layer initialized
[ 11.382427] Bluetooth: SCO socket layer initialized
[ 11.551488] usbcore: registered new interface driver btusb
[ 11.567862] ath9k 0000:03:00.0: enabling device (0100 -> 0102)
[ 11.574029] mc: Linux media interface: v0.10
[ 11.580240] ath: phy0: ASPM enabled: 0x43
[ 11.580278] ath: EEPROM regdomain: 0x60
[ 11.580279] ath: EEPROM indicates we should expect a direct regpair map
[ 11.580280] ath: Country alpha2 being used: 00
[ 11.580281] ath: Regpair used: 0x60
[ 11.581022] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.581668] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffff9c1cc0700000, irq=17
[ 11.585797] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[ 11.682296] videodev: Linux video capture interface: v2.00
[ 11.765989] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 11.766203] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 11.863697] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 11.863699] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.863700] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 11.863701] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 11.863702] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 11.863704] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 11.863705] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 11.876483] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 11.876571] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 11.876649] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 11.977410] intel_rapl_common: Found RAPL domain package
[ 11.977411] intel_rapl_common: Found RAPL domain core
[ 11.977412] intel_rapl_common: Found RAPL domain uncore
[ 11.977416] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 12.001875] uvcvideo: Found UVC 1.00 device ASUS USB2.0 Webcam (1bcf:2883)
[ 12.036819] uvcvideo 1-1.4:1.0: Entity type for entity Extension 3 was not initialized!
[ 12.036823] uvcvideo 1-1.4:1.0: Entity type for entity Processing 2 was not initialized!
[ 12.036825] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized!
[ 12.037023] input: ASUS USB2.0 Webcam: ASUS USB2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input13
[ 12.037246] usbcore: registered new interface driver uvcvideo
[ 12.037249] USB Video Class driver (1.1.1)
[ 12.043171] usbcore: registered new interface driver ath3k
[ 12.177880] usb 1-1.3: USB disconnect, device number 3
[ 12.401571] usb 1-1.3: new full-speed USB device number 5 using ehci-pci
[ 12.511210] usb 1-1.3: string descriptor 0 read error: -22
[ 12.511218] usb 1-1.3: New USB device found, idVendor=13d3, idProduct=3393, bcdDevice= 0.02
[ 12.511220] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 15.932609] audit: type=1400 audit(1598460639.915:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=697 comm="apparmor_parser"
[ 15.932615] audit: type=1400 audit(1598460639.915:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=697 comm="apparmor_parser"
[ 15.932618] audit: type=1400 audit(1598460639.915:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=697 comm="apparmor_parser"
[ 15.950939] audit: type=1400 audit(1598460639.935:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=694 comm="apparmor_parser"
[ 15.950945] audit: type=1400 audit(1598460639.935:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=694 comm="apparmor_parser"
[ 15.950949] audit: type=1400 audit(1598460639.935:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=694 comm="apparmor_parser"
[ 15.950952] audit: type=1400 audit(1598460639.935:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=694 comm="apparmor_parser"
[ 15.957757] audit: type=1400 audit(1598460639.943:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=699 comm="apparmor_parser"
[ 15.958152] audit: type=1400 audit(1598460639.943:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=698 comm="apparmor_parser"
[ 15.959930] audit: type=1400 audit(1598460639.943:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=704 comm="apparmor_parser"
[ 20.149601] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.149603] Bluetooth: BNEP filters: protocol multicast
[ 20.149607] Bluetooth: BNEP socket layer initialized
[ 24.362619] RTL8211E Gigabit Ethernet r8169-200:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
[ 24.546921] r8169 0000:02:00.0 enp2s0: Link is Down
[ 30.403157] systemd-journald[399]: File /var/log/journal/d4ac7a23be804d3f9f70f814325b0218/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 51.848927] Bluetooth: RFCOMM TTY layer initialized
[ 51.848950] Bluetooth: RFCOMM socket layer initialized
[ 51.848964] Bluetooth: RFCOMM ver 1.11
[ 100.229763] wlp3s0: authenticate with 60:e3:27:bc:c4:2c
[ 100.240748] wlp3s0: send auth to 60:e3:27:bc:c4:2c (try 1/3)
[ 100.243434] wlp3s0: authenticated
[ 100.245494] wlp3s0: associate with 60:e3:27:bc:c4:2c (try 1/3)
[ 100.249841] wlp3s0: RX AssocResp from 60:e3:27:bc:c4:2c (capab=0x431 status=0 aid=1)
[ 100.250073] wlp3s0: associated
[ 100.294891] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 127.649816] hub_port_connect: 17 callbacks suppressed
[ 127.649820] usb 2-1-port2: connect-debounce failed
[ 519.522049] pci_bus 0000:02: Allocating resources
[ 519.522066] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 519.522078] pci_bus 0000:03: Allocating resources
[ 519.522091] pcieport 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 519.522095] pcieport 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 519.522115] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xdf300000-0xdf4fffff 64bit pref]
[ 519.522125] pcieport 0000:00:1c.1: BAR 15: assigned [mem 0xdf500000-0xdf6fffff 64bit pref]
[ 519.522132] pcieport 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
[ 519.522330] pci_bus 0000:01: Allocating resources
[ 519.522334] pcieport 0000:00:01.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 519.522337] pcieport 0000:00:01.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 519.522340] pcieport 0000:00:01.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 519.522348] pcieport 0000:00:01.0: BAR 14: assigned [mem 0xdf700000-0xdf8fffff]
[ 519.522357] pcieport 0000:00:01.0: BAR 15: assigned [mem 0xdf900000-0xdfafffff 64bit pref]
[ 519.522362] pcieport 0000:00:01.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 519.869764] wlp3s0: deauthenticating from 60:e3:27:bc:c4:2c by local choice (Reason: 3=DEAUTH_LEAVING)
[ 520.412818] PM: suspend entry (deep)
[ 520.847998] Filesystems sync: 0.435 seconds
[ 520.848239] Freezing user space processes ... (elapsed 0.008 seconds) done.
[ 520.856888] OOM killer disabled.
[ 520.856888] Freezing remaining freezable tasks ... (elapsed 4.768 seconds) done.
[ 525.625390] printk: Suspending console(s) (use no_console_suspend to debug)
[ 525.640913] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 525.641263] sd 0:0:0:0: [sda] Stopping disk
[ 525.953471] ACPI: EC: interrupt blocked
[ 525.973560] ACPI: Preparing to enter system sleep state S3
[ 525.974990] ACPI: EC: event blocked
[ 525.974991] ACPI: EC: EC stopped
[ 525.974992] PM: Saving platform NVS memory
[ 525.975078] Disabling non-boot CPUs ...
[ 525.975583] IRQ 29: no longer affine to CPU1
[ 525.976615] smpboot: CPU 1 is now offline
[ 525.978557] smpboot: CPU 2 is now offline
[ 525.979764] IRQ 16: no longer affine to CPU3
[ 525.979771] IRQ 17: no longer affine to CPU3
[ 525.980785] smpboot: CPU 3 is now offline
[ 525.982137] ACPI: Low-level resume complete
[ 525.982185] ACPI: EC: EC started
[ 525.982186] PM: Restoring platform NVS memory
[ 525.983550] Enabling non-boot CPUs ...
[ 525.983606] x86: Booting SMP configuration:
[ 525.983607] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 525.987011] CPU1 is up
[ 525.987052] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 525.989750] CPU2 is up
[ 525.989783] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 525.992509] CPU3 is up
[ 525.993820] ACPI: Waking up from system sleep state S3
[ 526.322959] ACPI: EC: interrupt unblocked
[ 526.362819] ACPI: EC: event unblocked
[ 526.364642] usb usb1: root hub lost power or was reset
[ 526.364722] usb usb2: root hub lost power or was reset
[ 526.364740] ath: phy0: ASPM enabled: 0x43
[ 526.368540] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 526.368632] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 526.373881] sd 0:0:0:0: [sda] Starting disk
[ 526.697606] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 526.701624] ata3.00: configured for UDMA/133
[ 526.722141] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 526.722144] usb 2-1: reset high-speed USB device number 2 using ehci-pci
[ 527.174131] usb 2-1.4: reset high-speed USB device number 3 using ehci-pci
[ 527.174135] usb 1-1.3: reset full-speed USB device number 5 using ehci-pci
[ 527.282301] usb 1-1.3: device firmware changed
[ 527.362068] usb 1-1.4: reset high-speed USB device number 4 using ehci-pci
[ 527.557607] OOM killer enabled.
[ 527.557610] Restarting tasks ... done.
[ 527.568746] usb 1-1.3: USB disconnect, device number 5
[ 527.662012] usb 1-1.3: new full-speed USB device number 6 using ehci-pci
[ 527.770123] PM: suspend exit
[ 527.773023] usb 1-1.3: string descriptor 0 read error: -22
[ 527.773034] usb 1-1.3: New USB device found, idVendor=13d3, idProduct=3393, bcdDevice= 0.01
[ 527.773039] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 527.902093] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 527.908970] usb 1-1.3: USB disconnect, device number 6
[ 528.128884] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 528.128890] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 528.128893] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 528.131262] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 528.131268] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered ou
t
[ 528.131271] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 528.131857] ata1.00: configured for UDMA/133
[ 528.134015] usb 1-1.3: new full-speed USB device number 7 using ehci-pci
[ 528.243707] usb 1-1.3: string descriptor 0 read error: -22
[ 528.243710] usb 1-1.3: New USB device found, idVendor=13d3, idProduct=3393, bcdDevice= 0.02
[ 528.243712] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 528.483432] RTL8211E Gigabit Ethernet r8169-200:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
[ 528.675333] r8169 0000:02:00.0 enp2s0: Link is Down
[ 532.545288] wlp3s0: authenticate with 60:e3:27:bc:c4:2c
[ 532.556358] wlp3s0: send auth to 60:e3:27:bc:c4:2c (try 1/3)
[ 532.558686] wlp3s0: authenticated
[ 532.565822] wlp3s0: associate with 60:e3:27:bc:c4:2c (try 1/3)
[ 532.570905] wlp3s0: RX AssocResp from 60:e3:27:bc:c4:2c (capab=0x431 status=0 aid=1)
[ 532.571099] wlp3s0: associated
[ 532.579464] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 535.535179] audit: type=1400 audit(1598458773.548:29): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/cups/locale/" pid=776 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 535.535199] audit: type=1400 audit(1598458773.548:30): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/locale/" pid=776 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 556.596808] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1.
[ 556.596823] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106
und journalctl -b -xep err -- Logs begin at Fri 2019-12-20 20:54:08 CET, end at Wed 2020-08-26 18:52:06 CEST. -- Aug 26 18:50:49 alexandra-P45VA wpa_supplicant[755]: dbus: wpa_dbus_get_object_properties: failed to get object properties: (none) none Aug 26 18:50:49 alexandra-P45VA wpa_supplicant[755]: dbus: Failed to construct signal Aug 26 18:51:09 alexandra-P45VA spice-vdagent[1176]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0 Aug 26 18:51:15 alexandra-P45VA pulseaudio[1205]: [pulseaudio] backend-ofono.c: Failed to register as a handsfree audio agent with ofono: org.freedesktop.DBus.Error.ServiceUnknown: The name or Aug 26 18:51:17 alexandra-P45VA systemd[1]: Failed to start Network Manager Wait Online. -- Subject: Unit NetworkManager-wait-online.service has failed -- Defined-By: systemd -- Support: http://www.ubuntu.com/support -- -- Unit NetworkManager-wait-online.service has failed. -- -- The result is RESULT. Aug 26 16:52:32 alexandra-P45VA kernel: usb 2-1-port2: connect-debounce failed Aug 26 18:19:25 alexandra-P45VA systemd-rfkill[3639]: Failed to open device rfkill1: No such device Aug 26 18:19:26 alexandra-P45VA wpa_supplicant[755]: dbus: wpa_dbus_get_object_properties: failed to get object properties: (none) none Aug 26 18:19:26 alexandra-P45VA wpa_supplicant[755]: dbus: Failed to construct signal Aug 26 18:19:54 alexandra-P45VA kernel: mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. Vielen Dank für die Hilfe |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 15 |
☺ Das stimmt, sorry. Da hab ich's mir selber zu bequem gemacht. Es handelt sich um ein P45V |
|
Anmeldungsdatum: Beiträge: 12067 |
Gut, wenn es wieder läuft! Was mich ein wenig wundert ist die Ausgabe, ich erwarte da eher I/O-Errors. |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 15 |
Es ist kein virtualisiertes Kubuntu, ich hab's ganz normal installiert... |
