Hallo Leute,
ich bin per Remastersys mit meinem System (10.04-Xubuntu/LXDE) auf einen neuen Computer umgezogen - und habe dann die alte Platte mit eingebaut und als sdb1/ext4 formatiert. Wenn ich die Platte in die fstab eintrage, stoppt anschließend der Bootvorgang mit folgender Meldung:
keys: Drücken Sie S, um das Einhängen zun überspringen, oder M zur manuellen Wiederherstellung
.
Hier die UUID:
### blkid wsra@pece:~$ sudo blkid /dev/sda1: UUID="96D46219D461FBBD" TYPE="ntfs" /dev/sda2: UUID="5dd550d0-64b2-462d-a154-aa222cfd344a" TYPE="swap" /dev/sda3: UUID="6d4691f4-4b93-4f3b-a53e-be75bd31edca" TYPE="ext4" /dev/sdb1: UUID="20c632b3-78d8-47ef-a4ba-d29b480480ad" TYPE="ext4" /dev/ramzswap0: TYPE="swap"
.
Mit Hand mounten kein Problem
### Mount per Hand # funktioniert so: wsra@pece:~$ sudo mount -U 20c632b3-78d8-47ef-a4ba-d29b480480ad /home/wsra/Video_Backup/ # und auch so: wsra@pece:~$ sudo mount /dev/sdb1 /home/wsra/Video_Backup
.
Mit mount -a kommt aber schon eine Fehlermeldung:
## Mount-Meldung wsra@pece:~$ sudo mount -a mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error Manchmal liefert das Syslog wertvolle Informationen – versuchen Sie dmesg | tail oder so
.
fstab-Eintrag ist folgender (beide nicht funktionierenden Alternativen sind z.Zt. auskommentiert):
## fstab-Inhalt # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda3 during installation UUID=6d4691f4-4b93-4f3b-a53e-be75bd31edca / ext4 errors=remount-ro 0 1 # swap was on /dev/sda2 during installation UUID=5dd550d0-64b2-462d-a154-aa222cfd344a none swap sw 0 0 # mount sdb1 # /dev/sdb1 /home/wsra/Video_Backup ext4 default 0 2 # mount sdb1 - alternativ mit UUID # UUID=20c632b3-78d8-47ef-a4ba-d29b480480ad /home/wsra/Video_Backup ext4 default 0 2
.
Die fstab-Rechte sind in Ordnung:
### fstab-Rechte wsra@pece:~$ ls -l /etc/fstab -rw-r--r-- 1 root root 727 2011-04-03 22:51 /etc/fstab
.
mit fdisk sehe ich keine Fehler:
### fdisk-Auskunft wsra@pece:~$ sudo fdisk /dev/sdb Platte /dev/sdb: 40.0 GByte, 40020664320 Byte 255 Köpfe, 63 Sektoren/Spur, 4865 Zylinder Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x2ced2ced Gerät boot. Anfang Ende Blöcke Id System /dev/sdb1 1 4866 39080960 83 Linux
.
Entsprechend finde ich auch die Kernelmeldungen: erst einmal ein Auszug
### Kernel: dmesg - Ausschnitt sda = ata1.00 = Sygate sdb = ata1.01 = Western Digital wsra@pece:~$ dmesg [ 0.612523] ata1.00: ATA-6: ST340014A, 8.01, max UDMA/100 [ 0.612528] ata1.00: 78165360 sectors, multi 16: LBA48 [ 0.613640] ata1.01: ATA-5: WDC WD400EB-00CPF0, 06.04G06, max UDMA/100 [ 0.613644] ata1.01: 78165360 sectors, multi 0: LBA [ 0.628817] ata1.00: configured for UDMA/100 [ 0.688133] ata1.01: configured for UDMA/100 [ 0.863700] isapnp: No Plug & Play device found [ 0.863871] scsi 0:0:0:0: Direct-Access ATA ST340014A 8.01 PQ: 0 ANSI: 5 [ 0.864069] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.864201] scsi 0:0:1:0: Direct-Access ATA WDC WD400EB-00CP 06.0 PQ: 0 ANSI: 5 [ 0.864309] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 0.864483] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 0.864532] sd 0:0:0:0: [sda] Write Protect is off [ 0.864535] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.864561] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.864706] sda: sda1 sda2 sda3 [ 0.906659] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.906694] sd 0:0:1:0: [sdb] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 0.906738] sd 0:0:1:0: [sdb] Write Protect is off [ 0.906741] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.906765] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.906899] sdb: sdb1 [ 0.934215] sd 0:0:1:0: [sdb] Attached SCSI disk [ 0.954272] Freeing initrd memory: 13283k freed . . . [ 2.720867] EXT4-fs (sda3): mounted filesystem with ordered data mode [ 8.903512] Adding 1042424k swap on /dev/sda2. Priority:-1 extents:1 across:1042424k [ 8.949098] udev: starting version 151
und hier wenns interessiert die ganze Meldung
### Kernel: dmesg - Vollständig wsra@pece:~$ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-30-generic (buildd@vernadsky) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #59-Ubuntu SMP Tue Mar 1 21:30:21 UTC 2011 (Ubuntu 2.6.32-30.59-generic 2.6.32.29+drm33.13) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) [ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3ffb0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 base 00E0000000 mask FFFC000000 write-combining [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003ffb0000 (usable) [ 0.000000] modified: 000000003ffb0000 - 000000003ffc0000 (ACPI data) [ 0.000000] modified: 000000003ffc0000 - 000000003fff0000 (ACPI NVS) [ 0.000000] modified: 000000003fff0000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 2f30b000 - 30003ca3 [ 0.000000] ACPI: RSDP 000f95a0 00021 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 3ffb0100 0003C (v01 A M I OEMXSDT 09000417 MSFT 00000097) [ 0.000000] ACPI: FACP 3ffb0290 000F4 (v03 A M I OEMFACP 09000417 MSFT 00000097) [ 0.000000] ACPI: DSDT 3ffb03f0 035C8 (v01 K8UPG K8UPG126 00000126 INTL 02002026) [ 0.000000] ACPI: FACS 3ffc0000 00040 [ 0.000000] ACPI: APIC 3ffb0390 00054 (v01 A M I OEMAPIC 09000417 MSFT 00000097) [ 0.000000] ACPI: OEMB 3ffc0040 00040 (v01 A M I AMI_OEM 09000417 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008e1ed8] TEXT DATA BSS ==> [0000100000 - 00008e1ed8] [ 0.000000] #4 [002f30b000 - 0030003ca3] RAMDISK ==> [002f30b000 - 0030003ca3] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00008e2000 - 00008e50a9] BRK ==> [00008e2000 - 00008e50a9] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003ffb0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003ffb0 [ 0.000000] On node 0 totalpages: 261951 [ 0.000000] free_area_init_node: node 0, pgdat c079c940, node_mem_map c1001200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 272 pages used for memmap [ 0.000000] HighMem zone: 34466 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 20, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bffc0000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s36056 r0 d21288 u4194304 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259903 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-30-generic root=UUID=6d4691f4-4b93-4f3b-a53e-be75bd31edca ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5240960 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003ffb0) [ 0.000000] Memory: 1011644k/1048256k available (4689k kernel code, 35580k reserved, 2122k data, 664k init, 138952k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a7000 - 0xc084d000 ( 664 kB) [ 0.000000] .data : 0xc0594467 - 0xc07a6f08 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc0594467 (4689 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1795.817 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.63 BogoMIPS (lpj=7183268) [ 0.004029] Security Framework initialized [ 0.004062] AppArmor: AppArmor initialized [ 0.004071] Mount-cache hash table entries: 512 [ 0.004215] Initializing cgroup subsys ns [ 0.004219] Initializing cgroup subsys cpuacct [ 0.004224] Initializing cgroup subsys memory [ 0.004233] Initializing cgroup subsys devices [ 0.004237] Initializing cgroup subsys freezer [ 0.004239] Initializing cgroup subsys net_cls [ 0.004262] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004265] CPU: L2 Cache: 256K (64 bytes/line) [ 0.004270] mce: CPU supports 5 MCE banks [ 0.004290] Performance Events: AMD PMU driver. [ 0.004298] ... version: 0 [ 0.004300] ... bit width: 48 [ 0.004302] ... generic registers: 4 [ 0.004305] ... value mask: 0000ffffffffffff [ 0.004307] ... max period: 00007fffffffffff [ 0.004310] ... fixed-purpose events: 0 [ 0.004312] ... event mask: 000000000000000f [ 0.004317] Checking 'hlt' instruction... OK. [ 0.020782] SMP alternatives: switching to UP code [ 0.027641] Freeing SMP alternatives: 19k freed [ 0.027668] ACPI: Core revision 20090903 [ 0.032436] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.032443] ftrace: allocating 21799 entries in 43 pages [ 0.036116] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.036370] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.079175] CPU0: AMD Sempron(tm) Processor 3100+ stepping 00 [ 0.080001] Brought up 1 CPUs [ 0.080001] Total of 1 processors activated (3591.63 BogoMIPS). [ 0.080001] CPU0 attaching NULL sched-domain. [ 0.080001] devtmpfs: initialized [ 0.080001] regulator: core version 0.5 [ 0.080001] Time: 8:36:58 Date: 04/04/11 [ 0.080001] NET: Registered protocol family 16 [ 0.080001] EISA bus registered [ 0.080001] ACPI: bus type pci registered [ 0.080001] PCI: Using configuration type 1 for base access [ 0.080001] bio: create slab <bio-0> at 0 [ 0.080001] ACPI: EC: Look up EC in DSDT [ 0.081352] ACPI: Executed 1 blocks of module-level executable AML code [ 0.081704] ACPI Warning: Package List length (0x10A) larger than NumElements count (0x2), truncated [ 0.081710] (20090903/dsobject-515) [ 0.086008] ACPI: Interpreter enabled [ 0.086011] ACPI: (supports S0 S1 S4 S5) [ 0.086032] ACPI: Using IOAPIC for interrupt routing [ 0.091848] ACPI Warning: Incorrect checksum in table [OEMB] - E1, should be B1 (20090903/tbutils-314) [ 0.091922] ACPI: No dock devices found. [ 0.092030] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.092078] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff] [ 0.092201] pci 0000:00:02.5: reg 20 io port: [0xffa0-0xffaf] [ 0.092220] pci 0000:00:02.5: PME# supported from D3cold [ 0.092224] pci 0000:00:02.5: PME# disabled [ 0.092242] pci 0000:00:03.0: reg 10 32bit mmio: [0xfebfb000-0xfebfbfff] [ 0.092275] pci 0000:00:03.1: reg 10 32bit mmio: [0xfebfc000-0xfebfcfff] [ 0.092310] pci 0000:00:03.2: reg 10 32bit mmio: [0xfebfd000-0xfebfdfff] [ 0.092348] pci 0000:00:03.3: reg 10 32bit mmio: [0xfebfe000-0xfebfefff] [ 0.092376] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold [ 0.092379] pci 0000:00:03.3: PME# disabled [ 0.092406] pci 0000:00:04.0: reg 10 io port: [0xe400-0xe4ff] [ 0.092412] pci 0000:00:04.0: reg 14 32bit mmio: [0xfebff000-0xfebfffff] [ 0.092428] pci 0000:00:04.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff] [ 0.092441] pci 0000:00:04.0: supports D1 D2 [ 0.092444] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.092448] pci 0000:00:04.0: PME# disabled [ 0.092476] pci 0000:00:0a.0: reg 10 io port: [0xe800-0xe8ff] [ 0.092506] pci 0000:00:0a.0: supports D1 D2 [ 0.092602] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.092607] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.092619] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfeaf0000-0xfeafffff] [ 0.092651] pci 0000:00:01.0: bridge 32bit mmio: [0xfca00000-0xfeafffff] [ 0.092655] pci 0000:00:01.0: bridge 32bit mmio pref: [0xec900000-0xfc8fffff] [ 0.092662] pci_bus 0000:00: on NUMA node 0 [ 0.092666] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.094630] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15) [ 0.094727] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.094822] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15) [ 0.094916] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15) [ 0.095010] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *10 11 12 14 15) [ 0.095109] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 *11 12 14 15) [ 0.095202] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15) [ 0.095296] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 *11 12 14 15) [ 0.095414] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.095417] vgaarb: loaded [ 0.095554] SCSI subsystem initialized [ 0.095643] libata version 3.00 loaded. [ 0.095725] usbcore: registered new interface driver usbfs [ 0.095739] usbcore: registered new interface driver hub [ 0.095765] usbcore: registered new device driver usb [ 0.095894] ACPI: WMI: Mapper loaded [ 0.095896] PCI: Using ACPI for IRQ routing [ 0.096045] NetLabel: Initializing [ 0.096047] NetLabel: domain hash size = 128 [ 0.096049] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.096064] NetLabel: unlabeled traffic allowed by default [ 0.096117] Switching to clocksource tsc [ 0.098153] AppArmor: AppArmor Filesystem Enabled [ 0.098179] pnp: PnP ACPI init [ 0.098200] ACPI: bus type pnp registered [ 0.102717] pnp: PnP ACPI: found 16 devices [ 0.102720] ACPI: ACPI bus type pnp unregistered [ 0.102724] PnPBIOS: Disabled by ACPI PNP [ 0.102741] system 00:0a: ioport range 0x480-0x48f has been reserved [ 0.102745] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved [ 0.102748] system 00:0a: ioport range 0x800-0x8df has been reserved [ 0.102752] system 00:0a: ioport range 0x8e0-0x8ff has been reserved [ 0.102757] system 00:0a: iomem range 0xfff80000-0xffffffff could not be reserved [ 0.102761] system 00:0a: iomem range 0xffe80000-0xffefffff has been reserved [ 0.102764] system 00:0a: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.102771] system 00:0b: ioport range 0x295-0x296 has been reserved [ 0.102775] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.102778] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.102786] system 00:0f: iomem range 0x0-0x9ffff could not be reserved [ 0.102789] system 00:0f: iomem range 0xc0000-0xdffff could not be reserved [ 0.102793] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved [ 0.102796] system 00:0f: iomem range 0x100000-0x3fffffff could not be reserved [ 0.137483] pci 0000:00:04.0: BAR 6: address space collision on of device [0xfffe0000-0xffffffff] [ 0.137500] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.137503] pci 0000:00:01.0: IO window: disabled [ 0.137508] pci 0000:00:01.0: MEM window: 0xfca00000-0xfeafffff [ 0.137512] pci 0000:00:01.0: PREFETCH window: 0xec900000-0xfc8fffff [ 0.137526] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.137529] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.137532] pci_bus 0000:01: resource 1 mem: [0xfca00000-0xfeafffff] [ 0.137535] pci_bus 0000:01: resource 2 pref mem [0xec900000-0xfc8fffff] [ 0.137577] NET: Registered protocol family 2 [ 0.137680] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.138069] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.139192] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.139772] TCP: Hash tables configured (established 131072 bind 65536) [ 0.139776] TCP reno registered [ 0.139911] NET: Registered protocol family 1 [ 0.139980] pci 0000:01:00.0: Boot video device [ 0.140208] cpufreq-nforce2: No nForce2 chipset. [ 0.140238] Scanning for low memory corruption every 60 seconds [ 0.140354] audit: initializing netlink socket (disabled) [ 0.140371] type=2000 audit(1301906218.139:1): initialized [ 0.151675] Trying to unpack rootfs image as initramfs... [ 0.164212] highmem bounce pool size: 64 pages [ 0.164220] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.172158] VFS: Disk quotas dquot_6.5.2 [ 0.172265] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.172972] fuse init (API version 7.13) [ 0.173076] msgmni has been set to 1705 [ 0.173306] alg: No test for stdrng (krng) [ 0.173372] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.173376] io scheduler noop registered [ 0.173378] io scheduler anticipatory registered [ 0.173380] io scheduler deadline registered [ 0.173427] io scheduler cfq registered (default) [ 0.173546] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.173570] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.173680] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.173685] ACPI: Power Button [PWRB] [ 0.173737] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.173740] ACPI: Power Button [PWRF] [ 0.173906] processor LNXCPU:00: registered as cooling_device0 [ 0.180107] isapnp: Scanning for PnP cards... [ 0.185879] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.185977] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.186067] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.186427] 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.187585] brd: module loaded [ 0.192552] loop: module loaded [ 0.192674] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.192827] pata_sis 0000:00:02.5: version 0.5.2 [ 0.193021] scsi0 : pata_sis [ 0.193106] scsi1 : pata_sis [ 0.193790] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.193794] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.194166] Fixed MDIO Bus: probed [ 0.194209] PPP generic driver version 2.4.2 [ 0.194276] tun: Universal TUN/TAP device driver, 1.6 [ 0.194279] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.194373] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.194395] alloc irq_desc for 23 on node -1 [ 0.194398] alloc kstat_irqs on node -1 [ 0.194406] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.194425] ehci_hcd 0000:00:03.3: EHCI Host Controller [ 0.194459] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 [ 0.194496] ehci_hcd 0000:00:03.3: cache line size of 64 is not supported [ 0.194513] ehci_hcd 0000:00:03.3: irq 23, io mem 0xfebfe000 [ 0.238032] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 [ 0.238125] usb usb1: configuration #1 chosen from 1 choice [ 0.238160] hub 1-0:1.0: USB hub found [ 0.238170] hub 1-0:1.0: 8 ports detected [ 0.238230] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.238244] alloc irq_desc for 20 on node -1 [ 0.238247] alloc kstat_irqs on node -1 [ 0.238252] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.238262] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 0.238300] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 0.238320] ohci_hcd 0000:00:03.0: irq 20, io mem 0xfebfb000 [ 0.329544] usb usb2: configuration #1 chosen from 1 choice [ 0.329582] hub 2-0:1.0: USB hub found [ 0.329597] hub 2-0:1.0: 3 ports detected [ 0.329659] alloc irq_desc for 21 on node -1 [ 0.329662] alloc kstat_irqs on node -1 [ 0.329671] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.329691] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 0.329736] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 0.329766] ohci_hcd 0000:00:03.1: irq 21, io mem 0xfebfc000 [ 0.417574] usb usb3: configuration #1 chosen from 1 choice [ 0.417611] hub 3-0:1.0: USB hub found [ 0.417625] hub 3-0:1.0: 3 ports detected [ 0.417684] alloc irq_desc for 22 on node -1 [ 0.417687] alloc kstat_irqs on node -1 [ 0.417695] ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.417715] ohci_hcd 0000:00:03.2: OHCI Host Controller [ 0.417761] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 [ 0.417791] ohci_hcd 0000:00:03.2: irq 22, io mem 0xfebfd000 [ 0.505883] usb usb4: configuration #1 chosen from 1 choice [ 0.505920] hub 4-0:1.0: USB hub found [ 0.505934] hub 4-0:1.0: 2 ports detected [ 0.505999] uhci_hcd: USB Universal Host Controller Interface driver [ 0.506112] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.512137] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.512153] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.512343] mice: PS/2 mouse device common for all mice [ 0.512476] rtc_cmos 00:02: RTC can wake from S4 [ 0.512526] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.512547] rtc0: alarms up to one month, 114 bytes nvram [ 0.512693] device-mapper: uevent: version 1.0.3 [ 0.512831] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.512890] device-mapper: multipath: version 1.1.0 loaded [ 0.512893] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.513027] EISA: Probing bus 0 at eisa.0 [ 0.513060] EISA: Detected 0 cards. [ 0.514703] cpuidle: using governor ladder [ 0.514707] cpuidle: using governor menu [ 0.515185] TCP cubic registered [ 0.515388] NET: Registered protocol family 10 [ 0.515893] lo: Disabled Privacy Extensions [ 0.516342] NET: Registered protocol family 17 [ 0.516385] powernow-k8: Found 1 AMD Sempron(tm) Processor 3100+ processors (1 cpu cores) (version 2.20.00) [ 0.516472] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 [ 0.516475] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0xa [ 0.516521] Using IPI No-Shortcut mode [ 0.516645] PM: Resume from disk failed. [ 0.516663] registered taskstats version 1 [ 0.516820] Magic number: 7:713:623 [ 0.516902] rtc_cmos 00:02: setting system clock to 2011-04-04 08:36:58 UTC (1301906218) [ 0.516906] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.516908] EDD information not available. [ 0.528269] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.612523] ata1.00: ATA-6: ST340014A, 8.01, max UDMA/100 [ 0.612528] ata1.00: 78165360 sectors, multi 16: LBA48 [ 0.613640] ata1.01: ATA-5: WDC WD400EB-00CPF0, 06.04G06, max UDMA/100 [ 0.613644] ata1.01: 78165360 sectors, multi 0: LBA [ 0.628817] ata1.00: configured for UDMA/100 [ 0.688133] ata1.01: configured for UDMA/100 [ 0.863700] isapnp: No Plug & Play device found [ 0.863871] scsi 0:0:0:0: Direct-Access ATA ST340014A 8.01 PQ: 0 ANSI: 5 [ 0.864069] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.864201] scsi 0:0:1:0: Direct-Access ATA WDC WD400EB-00CP 06.0 PQ: 0 ANSI: 5 [ 0.864309] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 0.864483] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 0.864532] sd 0:0:0:0: [sda] Write Protect is off [ 0.864535] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.864561] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.864706] sda: sda1 sda2 sda3 [ 0.906659] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.906694] sd 0:0:1:0: [sdb] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 0.906738] sd 0:0:1:0: [sdb] Write Protect is off [ 0.906741] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.906765] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.906899] sdb: sdb1 [ 0.934215] sd 0:0:1:0: [sdb] Attached SCSI disk [ 0.954272] Freeing initrd memory: 13283k freed [ 1.036370] ata2.00: ATAPI: Optiarc DVD RW AD-5170A, 1.11, max UDMA/66 [ 1.036407] ata2.01: ATAPI: TSSTcorpDVD-ROM SH-D162D, SB01, max UDMA/33 [ 1.052385] ata2.00: configured for UDMA/66 [ 1.068355] ata2.01: configured for UDMA/33 [ 1.070795] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-5170A 1.11 PQ: 0 ANSI: 5 [ 1.073466] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1.073470] Uniform CD-ROM driver Revision: 3.20 [ 1.073594] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.073664] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 1.074668] scsi 1:0:1:0: CD-ROM TSSTcorp DVD-ROM SH-D162D SB01 PQ: 0 ANSI: 5 [ 1.106719] sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 1.106816] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 1.106869] sr 1:0:1:0: Attached scsi generic sg3 type 5 [ 1.106918] Freeing unused kernel memory: 664k freed [ 1.107604] Write protecting the kernel text: 4692k [ 1.107638] Write protecting the kernel read-only data: 1844k [ 1.140662] ramzswap: disk size set to 513096 kB [ 1.150421] udev: starting version 151 [ 1.239303] Adding 513092k swap on /dev/ramzswap0. Priority:100 extents:1 across:513092k SS [ 1.435299] Linux agpgart interface v0.103 [ 1.435492] sis900.c: v1.08.10 Apr. 2 2006 [ 1.435528] alloc irq_desc for 19 on node -1 [ 1.435531] alloc kstat_irqs on node -1 [ 1.435540] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.436451] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. [ 1.445304] 0000:00:04.0: Using transceiver found at address 1 as default [ 1.455090] FDC 0 is a post-1991 82077 [ 1.471363] eth0: SiS 900 PCI Fast Ethernet at 0xe400, IRQ 19, 00:0b:6a:8d:b2:77 [ 1.471390] agpgart-amd64 0000:00:00.0: AGP bridge [1039/0760] [ 1.474179] agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xe0000000 [ 1.553649] [drm] Initialized drm 1.1.0 20060810 [ 1.593159] alloc irq_desc for 16 on node -1 [ 1.593164] alloc kstat_irqs on node -1 [ 1.593173] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.596737] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x011000b2) [ 1.596846] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [ 1.716123] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 1.716401] [drm] nouveau 0000:01:00.0: BMP BIOS found [ 1.716404] [drm] nouveau 0000:01:00.0: BMP version 5.20 [ 1.716408] [drm] nouveau 0000:01:00.0: Bios version 03.11.01.30 [ 1.716412] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 1.4 [ 1.716415] [drm] nouveau 0000:01:00.0: No useful information in BIOS output table; adding all possible outputs [ 1.716419] [drm] nouveau 0000:01:00.0: Probing TV encoders on I2C bus: 1 [ 1.720876] [drm] nouveau 0000:01:00.0: No TV encoders found. [ 1.721113] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xAB7E [ 1.721129] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xB26C [ 1.721136] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xAB99 [ 1.721153] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xB213 [ 1.721162] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xAC2C [ 1.721166] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xAD80 [ 1.721184] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xAC51 [ 1.721207] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 7 at offset 0xAD1B [ 1.724983] [TTM] Zone kernel: Available graphics memory: 443620 kiB. [ 1.724987] [TTM] Zone highmem: Available graphics memory: 513096 kiB. [ 1.725002] [drm] nouveau 0000:01:00.0: 64 MiB VRAM [ 1.725059] agpgart-amd64 0000:00:00.0: AGP 2.0 bridge [ 1.725074] agpgart-amd64 0000:00:00.0: putting AGP V2 device into 4x mode [ 1.725104] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode [ 1.725109] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture) [ 1.725271] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0 [ 1.725589] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0 [ 1.725601] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0 [ 1.725610] [drm] nouveau 0000:01:00.0: Saving VGA fonts [ 1.760567] [drm] nouveau 0000:01:00.0: Detected a VGA connector [ 1.760780] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector [ 1.761621] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 1.761625] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1) [ 1.808516] [drm] nouveau 0000:01:00.0: Load detected on head A [ 1.812539] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x49000, bo f69ffc00 [ 1.812731] fb0: nouveaufb frame buffer device [ 1.812734] registered panic notifier [ 1.812741] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [ 1.815816] vga16fb: initializing [ 1.815823] vga16fb: mapped to 0xc00a0000 [ 1.815830] vga16fb: not registering due to another framebuffer present [ 1.837831] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [ 1.837837] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output @ [ 1.840811] Console: switching to colour frame buffer device 128x48 [ 2.364262] xor: automatically using best checksumming function: pIII_sse [ 2.384005] pIII_sse : 5435.000 MB/sec [ 2.384008] xor: using function: pIII_sse (5435.000 MB/sec) [ 2.387896] device-mapper: dm-raid45: initialized v0.2594b [ 2.720867] EXT4-fs (sda3): mounted filesystem with ordered data mode [ 8.903512] Adding 1042424k swap on /dev/sda2. Priority:-1 extents:1 across:1042424k [ 8.949098] udev: starting version 151 [ 9.097228] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.444437] parport_pc 00:07: reported by Plug and Play ACPI [ 9.444548] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 9.447566] psmouse serio1: ID: 10 00 64 [ 9.472538] lp: driver loaded but no devices found [ 9.532871] lp0: using parport0 (interrupt-driven). [ 9.590630] type=1505 audit(1301899027.571:2): operation="profile_load" pid=534 name="/sbin/dhclient3" [ 9.591904] type=1505 audit(1301899027.571:3): operation="profile_load" pid=534 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 9.592134] type=1505 audit(1301899027.575:4): operation="profile_load" pid=534 name="/usr/lib/connman/scripts/dhclient-script" [ 9.593624] ppdev: user-space parallel port driver [ 9.672228] gameport: NS558 PnP Gameport is pnp00:08/gameport0, io 0x200, speed 890kHz [ 9.913507] alloc irq_desc for 18 on node -1 [ 9.913512] alloc kstat_irqs on node -1 [ 9.913521] C-Media PCI 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 9.914436] mpu401_uart: unable to grab port 0x330 size 2 [ 9.914442] cmipci: no UART401 device at 0x330 [ 10.094520] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 10.777187] type=1505 audit(1301899028.759:5): operation="profile_replace" pid=741 name="/sbin/dhclient3" [ 10.777549] type=1505 audit(1301899028.759:6): operation="profile_replace" pid=741 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 10.777752] type=1505 audit(1301899028.759:7): operation="profile_replace" pid=741 name="/usr/lib/connman/scripts/dhclient-script" [ 10.949914] type=1505 audit(1301899028.931:8): operation="profile_load" pid=742 name="/usr/bin/evince" [ 10.954488] type=1505 audit(1301899028.935:9): operation="profile_load" pid=742 name="/usr/bin/evince-previewer" [ 10.958702] type=1505 audit(1301899028.939:10): operation="profile_load" pid=742 name="/usr/bin/evince-thumbnailer" [ 11.030870] type=1505 audit(1301899029.011:11): operation="profile_load" pid=747 name="/usr/lib/cups/backend/cups-pdf" [ 14.424864] eth0: Media Link On 100mbps full-duplex [ 15.689206] ip_tables: (C) 2000-2006 Netfilter Core Team [ 22.688019] eth0: no IPv6 routers present [ 50.794416] lo: Disabled Privacy Extensions [ 77.476500] Marking TSC unstable due to cpufreq changes [ 77.477293] Switching to clocksource acpi_pm
Vielen Dank für Eure Hilfe, lovelyboy