Hallo an alle FORUM Teilnehmer hier,
Ein ganz besonderes Hallo hier auch an AXT vom Moderatoren Team, der mir im Juni 2017 bereits wertvolle Hilfe geleistet hat.
Damals war mein Thema "Partitonierung für Neuinstallation" und ich hatte ein Problem mit der Partitionierung die ich nicht so geschaft hatte wie von AXT gewünscht.
Damals hatte ich den Wunsch mehrere Partitionen zu erstellen wie z.B. HOME, DATEN, ARCHIV, SICHERUNG,u.s.w., ich muss zugeben aus Unwissenheit und Unkenntnisund weil ich nicht so bewandert war mit der LINUX Materie habe ich damals es nicht hinbekommen.
Heute nun habe ich mein Netbook "MEDION AKOYA E1312" komplett NEU aufgesetzt bzw. installiert und bin EXACT nach den vorgegebenen Partitionier Richtlinien von AXT im Juni 2017 vorgegangen, und ich kann sagen das ich es geschafft habe und froh bin etwas ganz wichtiges durch AXT dazu gelernt zu haben.
Nun möchte ich Euch und wenn möglich auch Dich AXT, bitten die nun von mir gemachte Partitionierung mal zu überprüfen und mir noch weitere Tipps und Hilfestellung zu geben falls Ihr doch noch etwas gravierendes entdeckt, den wichtigsten Anfang habe ich ja schon einmal gemacht und so denke ich auch geschafft.
Im Grunde läuft das LUBUNTU 18.04 mit 64 Bit nun sehr gut mit nur noch als Primaire Partition "ROOT" und unter Erweiterte Partition die "SWAP" und "HOME für den ganzen Rest der Platte", meine gewünschten "DATEN" und "ARCHIV" Verzeichnisse habe ich fertigstellung der Installation unter HOME Manuel eingefügt und ich bin nun dabei weitere Software die ich benötige zu installieren.
Trotzdem habe ich aber gewisse bedenken und möchte auch diese noch beseitigen, dies wäre :
ich habe es nicht gefunden bzw. geschafft das GRUB wie von AXT gewünscht unter "SDA ohne Nummer" zu speichern
manchmal wenn ich den Rechner Starte Bootet er nicht korrekt bis zum Ende hoch und bleibt gleich am Anfang mit einem schwarzen Bildschirm hängen
Mein Frage und Befürchtung hier ist: Könnte es vielleicht sein das der Grund des Problems ist das GRUB jetzt nicht an der richtigen Festplattenstelle abgelegt wurde und ich diese jetzt noch Manuel irgendwie anders abspeichern muss.
Bei einem 2ten erneuten START kommt dann immer zuerst das GRUB Fenster und dort gebe ich dann die neueste LUBUNTU Version an und dann startet der Rechner ganz normal und problemlos.
Ich möchte Dich AXT und natürlich alle anderen guten Geister hier im Forum bitten mir weiterhin zu helfen.
Um Euch einen Überblick zu geben über den aktuellen Zustand des Rechners hier ein paar Details, falls Ihr noch andere Infos braucht, dann bitte meldet Euch.
PC-Informationen Ubuntu - Version Anzeige der Ubuntuversion, Release und Spitzname:
netbook@Medion-Akoya-E1312:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 18.04.1 LTS Release: 18.04 Codename: bionic netbook@Medion-Akoya-E1312:~$
Motherboard Herstellerangaben Anzeige von Modell und Hersteller:
netbook@Medion-Akoya-E1312:~$ sudo lshw -C system medion-akoya-e1312 Beschreibung: Arbeitsplatzrechner Produkt: E131x series (To Be Filled By O.E.M.) Hersteller: MEDION Version: Ver 1.000 Seriennummer: System Serial Number Breite: 64 bits Fähigkeiten: smbios-2.4 dmi-2.4 vsyscall32 Konfiguration: boot=normal chassis=desktop family=To Be Filled By O.E.M. sku=To Be Filled By O.E.M. uuid=00020003-0004-0005-0006-000700080009 netbook@Medion-Akoya-E1312:~$
Informationen zu Hersteller, Produkt, Version und Fähigkeiten des Mainboards:
netbook@Medion-Akoya-E1312:~$ sudo dmidecode -t0 -t1 # dmidecode 3.1 Getting SMBIOS data from sysfs. SMBIOS 2.4 present. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: American Megatrends Inc. Version: 080015 Release Date: 06/18/2009 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 1024 kB Characteristics: PCI is supported PNP is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported EDD is supported 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Targeted content distribution is supported BIOS Revision: 8.15 Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: MEDION Product Name: E131x series Version: Ver 1.000 Serial Number: System Serial Number UUID: 00020003-0004-0005-0006-000700080009 Wake-up Type: Power Switch SKU Number: To Be Filled By O.E.M. Family: To Be Filled By O.E.M. netbook@Medion-Akoya-E1312:~$
Hardware Allgemeine Informationen:
netbook@Medion-Akoya-E1312:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS690 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS690 PCI to PCI Bridge (Internal gfx) 00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] Device 7914 00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS690 PCI to PCI Bridge (PCI Express Port 1) 00:12.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 Non-Raid-5 SATA 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI0) 00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI1) 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI2) 00:13.3 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI3) 00:13.4 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI4) 00:13.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB Controller (EHCI) 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 14) 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB600 PCI to LPC Bridge 00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS690M [Radeon Xpress 1200/1250/1270] 01:05.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RS690 HDMI Audio [Radeon Xpress 1200 Series] 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 02) netbook@Medion-Akoya-E1312:~$
Hardware Ausführliche Hardwareinformationen:
netbook@Medion-Akoya-E1312:~$ sudo lshw -short H/W-Pfad Gerät Klasse Beschreibung ==================================================== system E131x series (To Be Filled By O.E.M.) /0 bus E131x series /0/0 memory 64KiB BIOS /0/4 processor AMD Sempron(tm) Processor 210U /0/4/5 memory 128KiB L1 Cache /0/4/6 memory 256KiB L2 Cache /0/d memory 2GiB Systemspeicher /0/d/0 memory 2GiB DIMM DDR2 Synchron /0/d/1 memory DIMM SDRAM [leer] /0/d/2 memory DIMM SDRAM [leer] /0/d/3 memory DIMM SDRAM [leer] /0/100 bridge RS690 Host Bridge /0/100/1 bridge RS690 PCI to PCI Bridge (Internal gfx) /0/100/1/5 display RS690M [Radeon Xpress 1200/1250/1270] /0/100/1/5.2 multimedia RS690 HDMI Audio [Radeon Xpress 1200 Ser /0/100/4 bridge Advanced Micro Devices, Inc. [AMD/ATI] /0/100/4/0 wlp2s0 network RTL8191SEvB Wireless LAN Controller /0/100/5 bridge RS690 PCI to PCI Bridge (PCI Express Por /0/100/5/0 enp3s0 network RTL8101/2/6E PCI Express Fast/Gigabit Et /0/100/12 storage SB600 Non-Raid-5 SATA /0/100/13 bus SB600 USB (OHCI0) /0/100/13/1 usb2 bus OHCI PCI host controller /0/100/13.1 bus SB600 USB (OHCI1) /0/100/13.1/1 usb3 bus OHCI PCI host controller /0/100/13.2 bus SB600 USB (OHCI2) /0/100/13.2/1 usb4 bus OHCI PCI host controller /0/100/13.2/1/1 input PS/2+USB Mouse /0/100/13.3 bus SB600 USB (OHCI3) /0/100/13.3/1 usb5 bus OHCI PCI host controller /0/100/13.4 bus SB600 USB (OHCI4) /0/100/13.4/1 usb6 bus OHCI PCI host controller /0/100/13.5 bus SB600 USB Controller (EHCI) /0/100/13.5/1 usb1 bus EHCI Host Controller /0/100/14 bus SBx00 SMBus Controller /0/100/14.2 multimedia SBx00 Azalia (Intel HDA) /0/100/14.3 bridge SB600 PCI to LPC Bridge /0/100/14.4 bridge SBx00 PCI to PCI Bridge /0/101 bridge K8 [Athlon64/Opteron] HyperTransport Tec /0/102 bridge K8 [Athlon64/Opteron] Address Map /0/103 bridge K8 [Athlon64/Opteron] DRAM Controller /0/104 bridge K8 [Athlon64/Opteron] Miscellaneous Cont /0/1 scsi2 storage /0/1/0.0.0 /dev/sda disk 160GB Hitachi HTS54321 /0/1/0.0.0/1 /dev/sda1 volume 14GiB EXT4-Laufwerk /0/1/0.0.0/2 /dev/sda2 volume 134GiB Extended partition /0/1/0.0.0/2/5 /dev/sda5 volume 3GiB Linux swap Laufwerk /0/1/0.0.0/2/6 /dev/sda6 volume 131GiB EXT4-Laufwerk netbook@Medion-Akoya-E1312:~$
Festplatten¶ Anzeige der Bezeichnungen /dev/... der angeschlossenen Festplatten/Wechseldatenträger – nur Partitionen:
netbook@Medion-Akoya-E1312:~$ sed -ne 's/.*\([sh]d[a-zA-Z]\+[0-9]\+$\)/\/dev\/\1/p' /proc/partitions /dev/sda1 /dev/sda2 /dev/sda5 /dev/sda6 netbook@Medion-Akoya-E1312:~$
Anzeige von Bezeichnung, Dateisystemtyp, Label, Einhängepunkt, UUID - hier: alle Datenträger:
netbook@Medion-Akoya-E1312:~$ sudo blkid -o list -w /dev/null device fs_type label mount point UUID ------------------------------------------------------------------------------- /dev/sda1 ext4 / 12fc6c34-8591-4172-a4ca-f8c4203c38a1 /dev/sda5 swap [SWAP] ab4d4f37-befc-4090-a506-098403857ae2 /dev/sda6 ext4 /home 7112f94c-e1e7-4198-a7cd-752fa3f081f8 netbook@Medion-Akoya-E1312:~$
Anzeige der Datenträgerbezeichnungen und weiteren Informationen (UUID, Dateisystemtyp, Größe, Label, Einhängepunkt):
netbook@Medion-Akoya-E1312:~$ sudo lsblk -o NAME,UUID,FSTYPE,SIZE,LABEL,MOUNTPOINT NAME UUID FSTYPE SIZE LABEL MOUNTPOINT sda 149,1G ├─sda1 12fc6c34-8591-4172-a4ca-f8c4203c38a1 ext4 15G / ├─sda2 1K ├─sda5 ab4d4f37-befc-4090-a506-098403857ae2 swap 3G [SWAP] └─sda6 7112f94c-e1e7-4198-a7cd-752fa3f081f8 ext4 131G /home netbook@Medion-Akoya-E1312:~$
Anzeige von Bezeichnung, Größe, Belegung, Einhängepunkt:
netbook@Medion-Akoya-E1312:~$ df -h Dateisystem Größe Benutzt Verf. Verw% Eingehängt auf udev 904M 0 904M 0% /dev tmpfs 187M 1,3M 186M 1% /run /dev/sda1 15G 4,4G 9,6G 32% / tmpfs 934M 34M 901M 4% /dev/shm tmpfs 5,0M 4,0K 5,0M 1% /run/lock tmpfs 934M 0 934M 0% /sys/fs/cgroup /dev/sda6 128G 45G 77G 37% /home tmpfs 187M 16K 187M 1% /run/user/1000 netbook@Medion-Akoya-E1312:~$
Anzeige von Bezeichnung, Dateisystemtyp, Label, Einhängepunkt, UUID – hier:
netbook@Medion-Akoya-E1312:~$ sudo blkid -o list -w /dev/null device fs_type label mount point UUID ----------------------------------------------------------------------------------------------------------------------------------- /dev/sda1 ext4 / 12fc6c34-8591-4172-a4ca-f8c4203c38a1 /dev/sda5 swap [SWAP] ab4d4f37-befc-4090-a506-098403857ae2 /dev/sda6 ext4 /home 7112f94c-e1e7-4198-a7cd-752fa3f081f8 netbook@Medion-Akoya-E1312:~$
Alternative Darstellung mit lsblk (zusätzlich noch mit der Größe):
netbook@Medion-Akoya-E1312:~$ sudo lsblk -o NAME,UUID,FSTYPE,SIZE,LABEL,MOUNTPOINT NAME UUID FSTYPE SIZE LABEL MOUNTPOINT sda 149,1G ├─sda1 12fc6c34-8591-4172-a4ca-f8c4203c38a1 ext4 15G / ├─sda2 1K ├─sda5 ab4d4f37-befc-4090-a506-098403857ae2 swap 3G [SWAP] └─sda6 7112f94c-e1e7-4198-a7cd-752fa3f081f8 ext4 131G /home netbook@Medion-Akoya-E1312:~$
Zeige mit lsblk alle für den gewöhnlichen Benutzer/Admin interessanten Attribute:
netbook@Medion-Akoya-E1312:~$ sudo lsblk -o NAME,FSTYPE,UUID,RO,RM,SIZE,STATE,OWNER,GROUP,MODE,TYPE,MOUNTPOINT,LABEL,MODEL NAME FSTYPE UUID RO RM SIZE STATE OWNER GROUP MODE TYPE MOUNTPOINT LABEL MODEL sda 0 0 149,1G runni root disk brw-rw---- disk Hitac ├─sda1 │ ext4 12fc6c34-8591-4172-a4ca-f8c4203c38a1 0 0 15G root disk brw-rw---- part / ├─sda2 │ 0 0 1K root disk brw-rw---- part ├─sda5 │ swap ab4d4f37-befc-4090-a506-098403857ae2 0 0 3G root disk brw-rw---- part [SWAP] └─sda6 ext4 7112f94c-e1e7-4198-a7cd-752fa3f081f8 0 0 131G root disk brw-rw---- part /home netbook@Medion-Akoya-E1312:~$
Ich würde mich sehr freuen von Euch zu hören.
Vielen Dank im voraus !
Helmut alias 659888