xobuntu
Anmeldungsdatum: 4. November 2018
Beiträge: Zähle...
|
Hallo! Ich habe diverse Tips und Tricks hier und im Rest des www gesucht und entsprechende Versuche unternommen, die Soundkarte wieder zu aktivieren, aber nichts half. Vom USB-Stick gebootete Live-Systeme finden die Soundkarte ohne Probleme.
Ich hatte das System vor ein paar Tagen neu aufgesetzt, nach und nach Software installiert - allerdings zum 2. Mal, da das gleiche vorher schon passiert war. Irgendein Paket scheint den Fehler auszulösen. Ich habe hier diverse Terminal-Ausgaben gesammelt, die helfen sollen, den Fehler zu finden: user@acer:~$ cat /proc/asound/cards
0 [sofhdadsp ]: sof-hda-dsp - sof-hda-dsp
TGL-SwiftSF313_53-V1.06-Skol_TL
user@acer:~$ lspci | grep -i audio
0000:00:1f.3 Multimedia audio controller: Intel Corporation Tiger Lake-LP Smart Sound Technology Audio Controller (rev 20)
user@acer:~$ head -n 1 /proc/asound/card0/codec*
==> /proc/asound/card0/codec#0 <==
Codec: Realtek ALC256
==> /proc/asound/card0/codec#2 <==
Codec: Intel Tigerlake HDMI
user@acer:~$ aplay -l
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: sofhdadsp [sof-hda-dsp], Gerät 0: HDA Analog (*) []
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 0: sofhdadsp [sof-hda-dsp], Gerät 1: HDA Digital (*) []
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 0: sofhdadsp [sof-hda-dsp], Gerät 3: HDMI1 (*) []
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 0: sofhdadsp [sof-hda-dsp], Gerät 4: HDMI2 (*) []
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 0: sofhdadsp [sof-hda-dsp], Gerät 5: HDMI3 (*) []
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
user@acer:~$
user@acer:~$ amixer sset Master unmute
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 87
Mono: Playback 86 [99%] [-0.75dB] [on]
user@acer:~$
Bei der letzten Sitzung funktionierte der ALSAMIXER noch und zeigt alles ok an, jetzt das: user@acer:~$ alsamixer
ALSA lib confmisc.c:855:(parse_card) cannot find card '0'
ALSA lib conf.c:5180:(_snd_config_evaluate) function snd_func_card_inum returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib confmisc.c:422:(snd_func_concat) error evaluating strings
ALSA lib conf.c:5180:(_snd_config_evaluate) function snd_func_concat returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib confmisc.c:1334:(snd_func_refer) error evaluating name
ALSA lib conf.c:5180:(_snd_config_evaluate) function snd_func_refer returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:5703:(snd_config_expand) Evaluate error: Datei oder Verzeichnis nicht gefunden
ALSA lib control.c:1528:(snd_ctl_open_noupdate) Invalid CTL default
Fehler beim Öffen des Mixer-Gerätes: Datei oder Verzeichnis nicht gefunden
user@acer:~$
Was tun?
|
von.wert
Anmeldungsdatum: 23. Dezember 2020
Beiträge: 9625
|
xobuntu schrieb:
ALSA lib confmisc.c:855:(parse_card) cannot find card '0'
Nach Ausgaben kann man suchen. ALSA Sieh in "/etc/modprobe.d/alsa-base.conf"! ...und eh jetzt (wieder) einer kommt mit PipeWire in 22.10 default, nein, nur in Ubuntu, nicht in den Flavours.
|
xobuntu
(Themenstarter)
Anmeldungsdatum: 4. November 2018
Beiträge: 30
|
Ähm... Danke, aber das übersteigt meine Kenntnisse. ich weiss nicht, was das bedeutet, oder was zu tun wäre. etc/modprobe.d/alsa-base.conf sagt:
# autoloader aliases
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
install sound-slot-3 /sbin/modprobe snd-card-3
install sound-slot-4 /sbin/modprobe snd-card-4
install sound-slot-5 /sbin/modprobe snd-card-5
install sound-slot-6 /sbin/modprobe snd-card-6
install sound-slot-7 /sbin/modprobe snd-card-7
# Cause optional modules to be loaded above generic modules
install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; }
#
# Workaround at bug #499695 (reverted in Ubuntu see LP #319505)
install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; }
install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; }
install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; }
#
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# Cause optional modules to be loaded above sound card driver modules
install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; }
install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; }
# Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway)
install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; }
# Prevent abnormal drivers from grabbing index 0
options bt87x index=-2
options cx88_alsa index=-2
options saa7134-alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio index=-2
options snd-usb-caiaq index=-2
options snd-usb-ua101 index=-2
options snd-usb-us122l index=-2
options snd-usb-usx2y index=-2
# Ubuntu #62691, enable MPU for snd-cmipci
options snd-cmipci mpu_port=0x330 fm_port=0x388
# Keep snd-pcsp from being loaded as first soundcard
options snd-pcsp index=-2
# Keep snd-usb-audio from beeing loaded as first soundcard
options snd-usb-audio index=-2
|
von.wert
Anmeldungsdatum: 23. Dezember 2020
Beiträge: 9625
|
Ich habe Dir den Wiki-Artikel ALSA verlinkt. Den willst Du lesen und danach handeln. Ich habe Dir ebenfalls gezeigt, wie man sinnvoll sucht.
|
xobuntu
(Themenstarter)
Anmeldungsdatum: 4. November 2018
Beiträge: 30
|
von.wert schrieb: Ich habe Dir den Wiki-Artikel ALSA verlinkt. Den willst Du lesen und danach handeln. Ich habe Dir ebenfalls gezeigt, wie man sinnvoll sucht.
Besten Dank, aber auf solche Hilfe kann ich verzichten!
Wie gesagt, verstehe ich das Problem nicht und finde keine Lösung.
|
hakel2022
Anmeldungsdatum: 21. Februar 2022
Beiträge: 2260
|
Zu sofhdadsp und Tiger Lake findest du viele Anleitungen im Netz. Das ist ein echtes Hardware Problem mit Linux.
|
Marant--
Anmeldungsdatum: 4. April 2022
Beiträge: 744
|
Bei der letzten Sitzung funktionierte der ALSAMIXER noch und zeigt alles ok an, jetzt das:
Nichts verändert/ installiert?
|
xobuntu
(Themenstarter)
Anmeldungsdatum: 4. November 2018
Beiträge: 30
|
Marant-- schrieb: Bei der letzten Sitzung funktionierte der ALSAMIXER noch und zeigt alles ok an, jetzt das:
Nichts verändert/ installiert?
Doch: Ich habe versucht, ob das hier hilft: //wiki.ubuntuusers.de/Soundkarten_konfigurieren/HDA/:
|
xobuntu
(Themenstarter)
Anmeldungsdatum: 4. November 2018
Beiträge: 30
|
Hat jemand Erfahrungen, welche Software bei der Installation in der Lage ist, die Soundkarte ungefragt wegzukonfigurieren? Welche Dateien genau sind dafür zuständig, daß die Soundkarte funzt? Könnte man diese ggf wiederherstellen?
|
Marant--
Anmeldungsdatum: 4. April 2022
Beiträge: 744
|
Vergiss es, sind zu viele Stellschrauben an denen gedreht werden kann. Zeige mal aplay -l
sudo dmesg | egrep -i "BOOT_IMAGE|secure|efi: |Linux version|DMI:|snd|sound|audio|codec|hda|hdmi|'/input'|fail|firmware|sof-" edit aplay nicht mehr, gerade Deine Ausgabe gesehen. teste mal speaker-test -c2 -D plughw:0,0 --test=wav -w /usr/share/sounds/alsa/Front_Center.wav
|
xobuntu
(Themenstarter)
Anmeldungsdatum: 4. November 2018
Beiträge: 30
|
$ speaker-test -c2 -D plughw:0,0 --test=wav -w /usr/share/sounds/alsa/Front_Center.wav
speaker-test 1.2.6
Wiedergabe-Gerät ist plughw:0,0
Stream-Parameter sind 48000 Hz, S16_LE, 2 Kanäle
WAV-Datei(en)
ALSA lib confmisc.c:165:(snd_config_get_card) Cannot get card index for 0
Fehler beim Öffnen des Gerätes: -2, Datei oder Verzeichnis nicht gefunden
|
Marant--
Anmeldungsdatum: 4. April 2022
Beiträge: 744
|
OK, zeige dann doch mal aplay -l
sudo dmesg | egrep -i "BOOT_IMAGE|secure|efi: |Linux version|DMI:|snd|sound|audio|codec|hda|hdmi|'/input'|fail|firmware|sof-"
|
xobuntu
(Themenstarter)
Anmeldungsdatum: 4. November 2018
Beiträge: 30
|
Marant-- schrieb: OK, zeige dann doch mal aplay -l
sudo dmesg | egrep -i "BOOT_IMAGE|secure|efi: |Linux version|DMI:|snd|sound|audio|codec|hda|hdmi|'/input'|fail|firmware|sof-"
Gerne: [ 0.000000] Linux version 5.19.0-23-generic (buildd@lcy02-amd64-076) (x86_64-linux-gnu-gcc-12 (Ubuntu 12.2.0-3ubuntu1) 12.2.0, GNU ld (GNU Binutils for Ubuntu) 2.39) #24-Ubuntu SMP PREEMPT_DYNAMIC Fri Oct 14 15:39:57 UTC 2022 (Ubuntu 5.19.0-23.24-generic 5.19.7)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.19.0-23-generic root=UUID=66bc7dc6-7eae-4888-a2f3-a2a504967dd9 ro quiet splash vt.handoff=7
[ 0.000000] efi: EFI v2.70 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x45bfe000 ACPI 2.0=0x45bfe014 TPMFinalLog=0x45ac5000 SMBIOS=0x439e2000 SMBIOS 3.0=0x439e0000 MEMATTR=0x3f252018 ESRT=0x3f62a698 MOKvar=0x3f256000 RNG=0x439e3298 TPMEventLog=0x3a8a2018
[ 0.000000] efi: seeding entropy pool
[ 0.000000] secureboot: Secure boot disabled
[ 0.000000] DMI: Acer Swift SF313-53/Skol_TL, BIOS V1.06 03/31/2021
[ 0.009614] secureboot: Secure boot disabled
[ 0.034218] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.19.0-23-generic root=UUID=66bc7dc6-7eae-4888-a2f3-a2a504967dd9 ro quiet splash vt.handoff=7
[ 0.034269] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-5.19.0-23-generic", will be passed to user space.
[ 0.095565] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.864213] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61483aa283d0ab2ad5af107250da9033dccef0'
[ 1.134748] BOOT_IMAGE=/boot/vmlinuz-5.19.0-23-generic
[ 1.216570] pci 10000:e0:1d.0: BAR 13: failed to assign [io size 0x1000]
[ 1.994704] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 1.996804] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
[ 2.016001] systemd[1]: First Boot Complete was skipped because of a failed condition check (ConditionFirstBoot=yes).
[ 2.479775] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-QuZ-a0-hr-b0-72.ucode failed with error -2
[ 2.482170] iwlwifi 0000:00:14.3: loaded firmware version 71.058653f6.0 QuZ-a0-hr-b0-71.ucode op_mode iwlmvm
[ 2.657177] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/tgl_dmc_ver2_12.bin (v2.12)
[ 2.673460] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[ 2.674915] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
[ 2.676696] thermal thermal_zone7: failed to read out thermal zone (-61)
[ 2.914026] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[ 2.914152] sof-audio-pci-intel-tgl 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
[ 2.914168] sof-audio-pci-intel-tgl 0000:00:1f.3: enabling device (0000 -> 0002)
[ 2.914450] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100
[ 3.074825] Bluetooth: hci0: Secure boot is enabled
[ 3.074828] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 3.075848] Bluetooth: hci0: Found device firmware: intel/ibt-19-0-4.sfi
[ 3.075908] Bluetooth: hci0: Firmware Version: 20-28.22
[ 3.331530] ucsi_acpi USBC000:00: PPM init failed (-110)
[ 4.043255] sof-audio-pci-intel-tgl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 4.110692] sof-audio-pci-intel-tgl 0000:00:1f.3: use msi interrupt mode
[ 4.133154] sof-audio-pci-intel-tgl 0000:00:1f.3: hda codecs found, mask 5
[ 4.133159] sof-audio-pci-intel-tgl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now
[ 4.133162] sof-audio-pci-intel-tgl 0000:00:1f.3: DMICs detected in NHLT tables: 2
[ 4.133197] sof-audio-pci-intel-tgl 0000:00:1f.3: Direct firmware load for intel/sof/sof-tgl.ri failed with error -2
[ 4.133200] sof-audio-pci-intel-tgl 0000:00:1f.3: error: sof firmware file is missing, you might need to
[ 4.133229] sof-audio-pci-intel-tgl 0000:00:1f.3: download it from https://github.com/thesofproject/sof-bin/
[ 4.133260] sof-audio-pci-intel-tgl 0000:00:1f.3: error: failed to load DSP firmware -2
[ 4.136910] sof-audio-pci-intel-tgl 0000:00:1f.3: error: sof_probe_work failed err: -2
[ 4.803637] Bluetooth: hci0: Waiting for firmware download to complete
[ 4.803838] Bluetooth: hci0: Firmware loaded in 1687487 usecs
[ 4.821890] Bluetooth: hci0: Firmware revision 0.4 build 20 week 28 2022
[ 9.142365] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[19187.688252] usb 3-2: Product: Corsair VOID Surround USB Sound Adaptor
[19187.868768] input: Cosair Corsair VOID Surround USB Sound Adaptor Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.3/0003:1B1C:0A30.0006/input/input25
[19187.928420] input: Cosair Corsair VOID Surround USB Sound Adaptor as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.3/0003:1B1C:0A30.0006/input/input26
[19187.928828] hid-generic 0003:1B1C:0A30.0006: input,hiddev1,hidraw5: USB HID v1.11 Device [Cosair Corsair VOID Surround USB Sound Adaptor] on usb-0000:00:14.0-2/input3
[19188.049466] usbcore: registered new interface driver snd-usb-audio
[19733.275829] usb 3-2: Product: Corsair VOID Surround USB Sound Adaptor
[19733.529618] input: Cosair Corsair VOID Surround USB Sound Adaptor Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.3/0003:1B1C:0A30.0007/input/input27
[19733.588397] input: Cosair Corsair VOID Surround USB Sound Adaptor as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.3/0003:1B1C:0A30.0007/input/input28
[19733.589017] hid-generic 0003:1B1C:0A30.0007: input,hiddev1,hidraw5: USB HID v1.11 Device [Cosair Corsair VOID Surround USB Sound Adaptor] on usb-0000:00:14.0-2/input3
vom Cosair Corsair VOID Surround USB Sound Adaptor nicht verwiren lassen, der bleibt auch stumm.
|
Marant--
Anmeldungsdatum: 4. April 2022
Beiträge: 744
|
[ 4.133200] sof-audio-pci-intel-tgl 0000:00:1f.3: error: sof firmware file is missing, you might need to
[ 4.133229] sof-audio-pci-intel-tgl 0000:00:1f.3: download it from https://github.com/thesofproject/sof-bin/
Muss später selbst erstmal testen. Falls Jmd schneller ist, bitte.
|
Marant--
Anmeldungsdatum: 4. April 2022
Beiträge: 744
|
Also ehrlich gesagt habe ich bisher noch nicht die offb. passende Lösung gefunden um die aktuelle Version 2.3 korrekt einzubinden. Das(die Antwort) könnte man tlw. nutzen. sof-tplg gibt's offb. so nicht mehr.
|