|
fredvomjupiter
Anmeldungsdatum:
30. Januar 2009
Beiträge: 330
Wohnort: Saarland
|
Hallo,
habe hier eine Anleitung http://wiki.ubuntuusers.de/Scanner_gt68xx gefunden wie man gewisse USB Scanner zum laufen bekommen soll.
Ich habe einen alten Plustek Optic SLim 1200 und bin wohl zu blöde um ihn ins Rennen zu bekommen.
Habe mir folgende Firware Dateien aus den Quellen in der Anleitung besort: meister@meister-desktop:/usr/share/sane/gt68xx$ ls -l
insgesamt 40
-rwxr-xr-x 1 root root 8192 2010-02-20 15:12 Artec48.usb
-rwxr-xr-x 1 root root 8192 2010-02-20 15:21 cism216.fw
-rwxr-xr-x 1 root root 8192 2010-02-20 15:12 eplus2k.usb
-rwxr-xr-x 1 root root 7343 2010-02-20 15:12 gt680xfw.usb
-rwxr-xr-x 1 root root 7986 2010-02-20 15:12 ps1fw.usb
meister@meister-desktop:/usr/share/sane/gt68xx$ meine /etc/sane.d/gt68xx.conf datei sieht so aus (gänderte Stelle ist gelb markiert): # gt68xx.conf: Configuration file for GT68XX based scanners (sane-backends 1.0.19)
# Read man sane-gt68xx for documentation
# Put the firmware file into "/usr/share/sane/gt68xx/".
# Manual configuration is necessary for some scanners. Please uncomment the
# override line and optinally the vendor and product lines that apply to your
# scanner. For some scanners it's also necessary to change the name of the
# firmware file.
#############################################################################
# For testing scanners that are not yet supported by this backend add the
# vendor and product ids in the usb line below. Also fill in the override
# and firmware lines. For more details, see:
# http://www.meier-geinitz.de/sane/gt68xx-backend/adding.html
# usb vendor product
# override "something"
# firmware "path"
##############################################################################
# Autodetect Mustek BearPaw 1200 CU, 2400 CU, Mustek ScanExpress 1200 UB Plus,
# Artec Ultima 2000 (e+), and several other GT-6801-based scanners
usb 0x05d8 0x4002
# Mustek BearPaw 1200 CU doesn't need any manual override
# Mustek ScanExpress 1200 UB Plus:
#override "mustek-scanexpress-1200-ub-plus"
# Medion/Lifetec/Tevion LT 9452:
#override "mustek-scanexpress-1200-ub-plus"
#vendor "Lifetec"
#model "LT 9452"
# Trust Compact Scan USB 19200:
#override "mustek-scanexpress-1200-ub-plus"
#vendor "Trust"
#model "Compact Scan USB 19200"
# Mustek ScanExpress 2400 USB
#override "mustek-scanexpress-2400-usb"
# Artec Ultima 2000:
#override "artec-ultima-2000"
#firmware "ePlus2k.usb"
# Artec Ultima 2000e+:
#override "artec-ultima-2000"
#firmware "ePlus2k.usb"
#vendor "Artec"
#model "Ultima 2000e+"
# Boeder SmartScan Slim Edition:
#override "artec-ultima-2000"
#vendor "Boeder"
#model "SmartScan Slim Edition"
# Medion/Lifetec/Tevion/Cytron MD/LT 9385:
#override "artec-ultima-2000"
#vendor "Medion"
#model "MD/LT 9385"
# Medion/Lifetec/Tevion/Cytron MD 9458:
#override "artec-ultima-2000"
#vendor "Medion"
#model "MD 9458"
# Trust Flat Scan USB 19200:
#override "artec-ultima-2000"
#vendor "Trust"
#model "Flat Scan USB 19200"
# Mustek BearPaw 2400 CU:
#override "mustek-bearpaw-2400-cu"
# Fujitsu 1200CUS:
#override "mustek-bearpaw-2400-cu"
#vendor "Fujitsu"
#model "1200CUS"
##############################################################################
# Autodetect Mustek BearPaw 1200 TA and Mustek BearPaw 1200 CS
usb 0x055f 0x021e
# Mustek BearPaw 1200 TA doesn't need any manual settings
# Mustek BearPaw 1200 CS:
#model "Bearpaw 1200 CS"
##############################################################################
# Autodetect Mustek BearPaw 2400 TA and Mustek BearPaw 2400 CS
usb 0x055f 0x0218
# Mustek BearPaw 2400 TA doesn't need any manual settings
# Mustek BearPaw 2400 CS:
#model "Bearpaw 2400 CS"
##############################################################################
# Autodetect Mustek BearPaw 2400 TA Plus, Packard Bell Diamond 2450, and
# Trust 240TH Easy Webscan Gold
usb 0x055f 0x0219
# Mustek BearPaw 2400 TA doesn't need any manual settings
# Trust 240TH Easy Webscan Gold:
#vendor "Trust"
#model "240TH Easy Webscan Gold"
# Packard Bell Diamond 2450:
#vendor "Packard Bell"
#model "Diamond 2450"
##############################################################################
# Autodetect Mustek BearPaw 2448 TA Plus and Mustek BearPaw 2448 CS Plus
usb 0x055f 0x021a
# Mustek BearPaw 2448 CS Plus:
#model "Bearpaw 2448 CS Plus"
##############################################################################
# Autodetect Mustek BearPaw 2400 CU Plus
usb 0x055f 0x021d
##############################################################################
# Autodetect Mustek ScanExpress 1248 UB
usb 0x055f 0x021f
##############################################################################
# Autodetect Mustek Bearpaw 1200 CU Plus and Packard Bell Diamond 1200
usb 0x055f 0x021c
# Mustek BearPaw 1200 CU Plus doesn't need any manual settings
# Packard Bell Diamond 1200:
#vendor "Packard Bell"
#model "Diamond 1200"
# Another Mustek BearPaw 1200 CU Plus version?
usb 0x055f 0x021b
##############################################################################
# Autodetect Mustek ScanExpress A3 USB
usb 0x055f 0x0210
# Mustek ScanExpress A3 USB doesn't need any manual settings
##############################################################################
# Autodetect Lexmark X70/X73
usb 0x043d 0x002d
##############################################################################
# Autodetect Plustek OpticPro 1248U and Revscan 19200i
usb 0x07b3 0x0401
usb 0x07b3 0x0400
# Plustek OpticPro 1248U doesn't need any manual settings
# RevScan 19200i
#vendor "RevScan"
#model "19200i"
##############################################################################
# Autodetect Plustek OpticPro U16B and UT16B
usb 0x07b3 0x0402
usb 0x07b3 0x0403
# Plustek OpticPro U16B doesn't need any manual settings
# Plustek OpticPro UT16B
#model "UT16B"
##############################################################################
# Autodetect Plustek OpticPro S12 and Nortek MyScan1200
usb 0x07b3 0x040b
#vendor "Nortek"
#model "MyScan 1200"
##############################################################################
# Autodetect Plustek OpticPro S24
usb 0x07b3 0x040e
##############################################################################
# Autodetect Plustek OpticSlim M12 and NeatReceipts Scanalizer Professional 2.5
#usb 0x07b3 0x0412
#firmware „CISM216.FW“
#vendor „Plustek“
#model „OpticSlim M12“
##############################################################################
#Autodetect Plustek OpticSlim 1200
override "artec-ultima-2000"
usb 0x07b3 0x0412
firmware „gt680xfw.usb“
vendor „Plustek“
model „OpticSlim M12“
##############################################################################
# Autodetect Plustek OpticSlim 2400
usb 0x07b3 0x0422
##############################################################################
# Autodetect Genius Colorpage SF600
usb 0x0458 0x2021
##############################################################################
# Autodetect Genius Colorpage Vivid3x
usb 0x0458 0x2011
# Genius Colorpage Vivid3x doesn't need any manual settings
##############################################################################
# Autodetect Genius Colorpage Vivid4x
usb 0x0458 0x201b
##############################################################################
# Autodetect Genius Colorpage Vivid3xe
usb 0x0458 0x2017
##############################################################################
# Autodetect Genius Colorpage Vivid4xe
usb 0x0458 0x201a
##############################################################################
# Autodetect Genius Colorpage 1200 X
usb 0x0458 0x201d
##############################################################################
# Autodetect Genius Colorpage 1200 XE
usb 0x0458 0x201f
##############################################################################
# Autodetect Genius Colorpage Vivid 4
usb 0x0458 0x2014
##############################################################################
# Autodetect Genius Color Slim 1200
usb 0x0458 0x201E
##############################################################################
# Autodetect Visioneer OneTouch 7300
usb 0x04a7 0x0444
############################################################################## habe dort unter Firmware schon alle 5 Dateien, die ich mir besorgt habe eingetragen, aber der Scanner wird nicht erkannt.
Öffne ich XSane erscheint "Keine Geräte erreichbar" Am USB Anschluss scheint der Scanner allerdings auf den ersten Blick erkannt zu werden: meister@meister-desktop:~$ lsusb
Bus 001 Device 004: ID 0424:2504 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 07b3:0413 Plustek, Inc.
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c505 Logitech, Inc. Cordless Mouse+Keyboard Receiver
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
meister@meister-desktop:~$ jedoch genauer betrachtet: meister@meister-desktop:~$ scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
meister@meister-desktop:~$
habe gerade als ich mir meinen Beitrag angesehen habe, festgestellt, daß der erkannte Scanner in der conf an usb 0x07b3 0x0412 und nicht an usb 0x07b3 0x0413 hängt, habe jetzt in der conf die 413 eingetragen und bekomme jetzt die Meldung
Fehler beim öffnen des Gerätes 'gt68xx:libusb:004:002
ungültiges Argument
|
|
Benno-007
Anmeldungsdatum:
28. August 2007
Beiträge: 29240
Wohnort: Germany
|
Kenne mich mit Scanner-Einstellungen wenig aus, aber dmesg und lsmod (nach Anstecken) liefern noch weitere Meldungen, die bei den meisten Problemen helfen können. Schau auch mal im Ordner /var/log , ob xsane oder sane da ein Log angelegt haben könnte. Im Ordner /usr/share/doc könnte noch weitere Dokumentation von Einstellungen zu finden sein. Hast du schon man sane durchgeackert? Dort ist auch eine ganze Liste verwandter Befehle - könnten um die 100 sein (ist ja irre). Ah, je Model ein Befehl. Schau dir da mal sane-find-scanner, sane-usb, sane-v4l und vor allem auch sane-plustek und sane-plustek_pp an. sane-v4l ist wohl eher nix, aber sane-usb klingt sehr treffend: NAME
sane-usb - USB configuration tips for SANE
DESCRIPTION
This manual page contains information on how to access scanners with a USB interface. It focusses on two main topics: getting the scanner detected by the operating system kernel and using it
with SANE.
This page applies to USB most backends and scanners, as they use the generic sanei_usb interface. However, there is one exceptions: USB Scanners supported by the microtek2 backend need a special
USB kernel driver, see sane-microtek2(5) for details.
Also schaue mal bei lsmod, ob und welches Modul geladen wurde (sanei_usb? microtek2?) und ob das zu dem Scanner paßt (Google?). sane-plustek:
NAME
sane-plustek - SANE backend for LM983[1/2/3] based USB flatbed scanners
DESCRIPTION
The sane-plustek library implements a SANE (Scanner Access Now Easy) backend that provides access to USB flatbed scanners based on National Semiconductor Merlin chipsets (LM9831, 9832 and 9833).
If you’re looking for parallel-port support for Plustek scanner please refer to the sane-plustek_pp backend.
Überprüfe also auch das Chipset, ggf. per sudo lshw | grep -i plustek -A 10. Am besten meldest du dich mit den gesammelten Infos wieder hier. Es kann auch sein, dass du im System/ mit den Versionen was durcheinandergebracht hast: Es gibt schon im Paketmanager Metapakete für die meiste Firmware und Module (in einem Sammelpaket)... Hast du hier im Wiki schon nach Scannern geschaut, wie man es speziell unter Ubuntu angehen sollte? Habe noch das dort gefunden:
OTHER PLUSTEK SCANNERS
For parallelport device support see the plustek_pp backend.
The SCSI scanner OpticPro 19200S is a rebadged Artec AM12S scanner and is supported by the Artec backend.
Only the National Semiconductor LM983[1/2/] based devices of Plustek are supported by this backend. Older versions of the U12, the UT12, the U1212 and U1248 (GrandTech chipset) are not sup‐
ported.
Model Chipset backend
------------------------------------
U1248 GrandTech gt68xx
UT16B GrandTech gt68xx
OpticSlim 1200 GrandTech gt68xx
gt68xx müßte also das korrekte Modul sein, wenn ich das richtig verstehe. Und wahrscheinlich mußt du das dann per Manpage noch konfigurieren. Wobei eben die Konfiguration in sane-plustek anscheinend nicht zutrifft, da dies ja unter "OTHER PLUSTEK SCANNERS" vermerkt ist und drunter steht, dass die Konfiguration des Artikels nur für dieses Backend (also nicht gt... oder so) gelten würde, sondern eben nur für sane-plustek, was für deinen Scanner nicht zuständig zu sein scheint. Nun alles unklar? 😉
|
|
Benno-007
Anmeldungsdatum:
28. August 2007
Beiträge: 29240
Wohnort: Germany
|
Und lsusb gibt dir die Hersteller- und Model-IDs aus - du mußt immer die korrekte bei Konfigurationen etc. verwenden. Natürlich kannst du aber nur solche verwenden, die auch existieren bzw. an deinem PC angeschlossen sind. Hmm, hast du ja gemacht - aber wahrscheinlich an der falschen Stelle/ am falschen Modul usw. (alles muß zusammenpassen). Aber ich hab nun den Hinweis zu deinem Scanner gefunden: man sane-gt68xx Schau aber erstmal im Wiki.
|
|
fredvomjupiter
(Themenstarter)
Anmeldungsdatum:
30. Januar 2009
Beiträge: 330
Wohnort: Saarland
|
Danke erst mal, werde es heute mittag wenn ich zu Hause bin mal ausprobieren.
Im Wiki http://wiki.ubuntuusers.de/Scanner_gt68xx
habe ich wie im ersten Beitrag beschrieben schon geschaut und bin ja auch nach der Anleitung vorgegangen.
Die Seite die dort verlinkt wurde zu den Firmware Treibern, ist die gleiche, die mir die Herstellerseite auch verlinkt und der gt68xx scheint da wirklich der richtige für mein Model zu sein.
Teste heute mittag mal noch was du geschrieben hast und melde mich dann wieder. Danke mfg
Fred
|
|
fredvomjupiter
(Themenstarter)
Anmeldungsdatum:
30. Januar 2009
Beiträge: 330
Wohnort: Saarland
|
fredvomjupiter schrieb: Danke erst mal, werde es heute mittag wenn ich zu Hause bin mal ausprobieren.
Im Wiki http://wiki.ubuntuusers.de/Scanner_gt68xx
habe ich wie im ersten Beitrag beschrieben schon geschaut und bin ja auch nach der Anleitung vorgegangen.
Die Seite die dort verlinkt wurde zu den Firmware Treibern, ist die gleiche, die mir die Herstellerseite auch verlinkt und der gt68xx scheint da wirklich der richtige für mein Model zu sein.
Teste heute mittag mal noch was du geschrieben hast und melde mich dann wieder. Danke mfg
Fred
Das war auch alles schon recht viel auf einmal, ich experimentiere weiter, hier schon mal die Ergebnisse von "dmesg"
[ 0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.85 BogoMIPS (lpj=12001704)
[ 0.004034] Security Framework initialized
[ 0.004042] SELinux: Disabled at boot.
[ 0.004067] AppArmor: AppArmor initialized
[ 0.004079] Mount-cache hash table entries: 512
[ 0.004252] Initializing cgroup subsys ns
[ 0.004258] Initializing cgroup subsys cpuacct
[ 0.004261] Initializing cgroup subsys memory
[ 0.004266] Initializing cgroup subsys freezer
[ 0.004287] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.004291] CPU: L2 cache: 1024K
[ 0.004295] CPU: Physical Processor ID: 0
[ 0.004297] CPU: Processor Core ID: 0
[ 0.004301] using mwait in idle threads.
[ 0.004315] Checking 'hlt' instruction... OK.
[ 0.023864] ACPI: Core revision 20080926
[ 0.026027] ACPI: Checking initramfs for custom DSDT
[ 0.316468] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.359066] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
[ 0.360001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 6000.58 BogoMIPS (lpj=12001167)
[ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.004000] CPU: L2 cache: 1024K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.444404] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
[ 0.444429] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.448056] Brought up 2 CPUs
[ 0.448062] Total of 2 processors activated (12001.43 BogoMIPS).
[ 0.448111] CPU0 attaching sched-domain:
[ 0.448115] domain 0: span 0-1 level SIBLING
[ 0.448118] groups: 0 1
[ 0.448127] CPU1 attaching sched-domain:
[ 0.448130] domain 0: span 0-1 level SIBLING
[ 0.448133] groups: 1 0
[ 0.448219] net_namespace: 776 bytes
[ 0.448219] Booting paravirtualized kernel on bare hardware
[ 0.448445] Time: 16:59:44 Date: 02/22/10
[ 0.448445] regulator: core version 0.5
[ 0.448445] NET: Registered protocol family 16
[ 0.448445] EISA bus registered
[ 0.448445] ACPI: bus type pci registered
[ 0.452006] PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=3
[ 0.452009] PCI: Using configuration type 1 for base access
[ 0.453222] ACPI: EC: Look up EC in DSDT
[ 0.461101] ACPI: Interpreter enabled
[ 0.461109] ACPI: (supports S0 S1 S4 S5)
[ 0.461134] ACPI: Using IOAPIC for interrupt routing
[ 0.466812] ACPI: No dock devices found.
[ 0.466828] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.466892] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xefffffff]
[ 0.467052] pci 0000:00:1d.0: reg 20 io port: [0xcc00-0xcc1f]
[ 0.467107] pci 0000:00:1d.1: reg 20 io port: [0xd000-0xd01f]
[ 0.467162] pci 0000:00:1d.2: reg 20 io port: [0xd400-0xd41f]
[ 0.467217] pci 0000:00:1d.3: reg 20 io port: [0xd800-0xd81f]
[ 0.467742] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebff800-0xfebffbff]
[ 0.467790] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.467796] pci 0000:00:1d.7: PME# disabled
[ 0.467889] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.467895] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 0.467899] pci 0000:00:1f.0: quirk: region 0400-043f claimed by ICH4 GPIO
[ 0.467921] pci 0000:00:1f.1: reg 10 io port: [0xec00-0xec07]
[ 0.467929] pci 0000:00:1f.1: reg 14 io port: [0xe800-0xe803]
[ 0.467937] pci 0000:00:1f.1: reg 18 io port: [0xe400-0xe407]
[ 0.467944] pci 0000:00:1f.1: reg 1c io port: [0xe000-0xe003]
[ 0.467952] pci 0000:00:1f.1: reg 20 io port: [0xdc00-0xdc0f]
[ 0.467960] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.467989] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.468005] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.468012] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.468019] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.468026] pci 0000:00:1f.2: reg 20 io port: [0xfc00-0xfc0f]
[ 0.468081] pci 0000:00:1f.3: reg 20 io port: [0xc00-0xc1f]
[ 0.468126] pci 0000:00:1f.5: reg 10 io port: [0xc800-0xc8ff]
[ 0.468133] pci 0000:00:1f.5: reg 14 io port: [0xc400-0xc43f]
[ 0.468140] pci 0000:00:1f.5: reg 18 32bit mmio: [0xfebff600-0xfebff7ff]
[ 0.468148] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xfebff500-0xfebff5ff]
[ 0.468172] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.468177] pci 0000:00:1f.5: PME# disabled
[ 0.468225] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[ 0.468233] pci 0000:01:00.0: reg 14 32bit mmio: [0xc0000000-0xcfffffff]
[ 0.468241] pci 0000:01:00.0: reg 18 32bit mmio: [0xfc000000-0xfcffffff]
[ 0.468263] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe8e0000-0xfe8fffff]
[ 0.468317] pci 0000:00:01.0: bridge 32bit mmio: [0xfa800000-0xfe8fffff]
[ 0.468322] pci 0000:00:01.0: bridge 32bit mmio pref: [0xbff00000-0xdfefffff]
[ 0.468355] pci 0000:02:01.0: reg 10 32bit mmio: [0xfe9e0000-0xfe9fffff]
[ 0.468367] pci 0000:02:01.0: reg 18 io port: [0xac00-0xac1f]
[ 0.468393] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
[ 0.468398] pci 0000:02:01.0: PME# disabled
[ 0.468438] pci 0000:00:03.0: bridge io port: [0xa000-0xafff]
[ 0.468443] pci 0000:00:03.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[ 0.468494] pci 0000:03:09.0: reg 10 32bit mmio: [0xfeaff800-0xfeafffff]
[ 0.468502] pci 0000:03:09.0: reg 14 io port: [0xbc00-0xbc7f]
[ 0.468537] pci 0000:03:09.0: supports D2
[ 0.468540] pci 0000:03:09.0: PME# supported from D2 D3hot D3cold
[ 0.468545] pci 0000:03:09.0: PME# disabled
[ 0.468579] pci 0000:00:1e.0: transparent bridge
[ 0.468584] pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff]
[ 0.468589] pci 0000:00:1e.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.468609] bus 00 -> node 0
[ 0.468618] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.468816] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
[ 0.472631] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.472777] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.472918] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.473119] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.473261] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.473404] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.473546] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.473748] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 12 14 15)
[ 0.473862] ACPI: Power Resource [URP1] (off)
[ 0.473906] ACPI: Power Resource [URP2] (off)
[ 0.473952] ACPI: Power Resource [FDDP] (off)
[ 0.473995] ACPI: Power Resource [LPTP] (off)
[ 0.474093] ACPI: WMI: Mapper loaded
[ 0.474155] SCSI subsystem initialized
[ 0.474155] libata version 3.00 loaded.
[ 0.474155] usbcore: registered new interface driver usbfs
[ 0.474155] usbcore: registered new interface driver hub
[ 0.474155] usbcore: registered new device driver usb
[ 0.474155] PCI: Using ACPI for IRQ routing
[ 0.480015] Bluetooth: Core ver 2.13
[ 0.480035] NET: Registered protocol family 31
[ 0.480035] Bluetooth: HCI device and connection manager initialized
[ 0.480035] Bluetooth: HCI socket layer initialized
[ 0.480035] NET: Registered protocol family 8
[ 0.480035] NET: Registered protocol family 20
[ 0.480051] NetLabel: Initializing
[ 0.480053] NetLabel: domain hash size = 128
[ 0.480055] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.480078] NetLabel: unlabeled traffic allowed by default
[ 0.480179] hpet clockevent registered
[ 0.480184] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.480189] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.480196] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.484086] AppArmor: AppArmor Filesystem Enabled
[ 0.492014] pnp: PnP ACPI init
[ 0.492028] ACPI: bus type pnp registered
[ 0.495595] pnp: PnP ACPI: found 11 devices
[ 0.495599] ACPI: ACPI bus type pnp unregistered
[ 0.495604] PnPBIOS: Disabled by ACPI PNP
[ 0.495617] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.495620] system 00:01: ioport range 0x3f0-0x3f1 has been reserved
[ 0.495624] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.495627] system 00:01: ioport range 0x400-0x43f has been reserved
[ 0.495631] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.495635] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.530395] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.530398] pci 0000:00:01.0: IO window: disabled
[ 0.530405] pci 0000:00:01.0: MEM window: 0xfa800000-0xfe8fffff
[ 0.530410] pci 0000:00:01.0: PREFETCH window: 0x000000bff00000-0x000000dfefffff
[ 0.530417] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 0.530420] pci 0000:00:03.0: IO window: 0xa000-0xafff
[ 0.530426] pci 0000:00:03.0: MEM window: 0xfe900000-0xfe9fffff
[ 0.530430] pci 0000:00:03.0: PREFETCH window: disabled
[ 0.530437] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.530441] pci 0000:00:1e.0: IO window: 0xb000-0xbfff
[ 0.530447] pci 0000:00:1e.0: MEM window: 0xfea00000-0xfeafffff
[ 0.530452] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.530473] pci 0000:00:1e.0: setting latency timer to 64
[ 0.530478] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.530481] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.530484] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.530487] bus: 01 index 1 mmio: [0xfa800000-0xfe8fffff]
[ 0.530489] bus: 01 index 2 mmio: [0xbff00000-0xdfefffff]
[ 0.530492] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.530494] bus: 02 index 0 io port: [0xa000-0xafff]
[ 0.530497] bus: 02 index 1 mmio: [0xfe900000-0xfe9fffff]
[ 0.530499] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.530502] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.530504] bus: 03 index 0 io port: [0xb000-0xbfff]
[ 0.530507] bus: 03 index 1 mmio: [0xfea00000-0xfeafffff]
[ 0.530509] bus: 03 index 2 mmio: [0x0-0x0]
[ 0.530512] bus: 03 index 3 io port: [0x00-0xffff]
[ 0.530514] bus: 03 index 4 mmio: [0x000000-0xffffffff]
[ 0.530523] NET: Registered protocol family 2
[ 0.544074] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.544466] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.544955] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.545333] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.545336] TCP reno registered
[ 0.552117] NET: Registered protocol family 1
[ 0.552293] checking if image is initramfs... it is
[ 0.980467] Switched to high resolution mode on CPU 1
[ 0.983978] Switched to high resolution mode on CPU 0
[ 1.151229] Freeing initrd memory: 7381k freed
[ 1.151474] cpufreq: No nForce2 chipset.
[ 1.151648] audit: initializing netlink socket (disabled)
[ 1.151678] type=2000 audit(1266857984.149:1): initialized
[ 1.159755] highmem bounce pool size: 64 pages
[ 1.159763] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.161449] VFS: Disk quotas dquot_6.5.1
[ 1.161534] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.162348] fuse init (API version 7.10)
[ 1.162457] msgmni has been set to 1685
[ 1.162693] alg: No test for stdrng (krng)
[ 1.162718] io scheduler noop registered
[ 1.162721] io scheduler anticipatory registered
[ 1.162724] io scheduler deadline registered
[ 1.162743] io scheduler cfq registered (default)
[ 1.162864] pci 0000:01:00.0: Boot video device
[ 1.166214] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.166228] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.166389] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.166393] ACPI: Power Button (FF) [PWRF]
[ 1.166453] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.166456] ACPI: Power Button (CM) [PWRB]
[ 1.166738] processor ACPI_CPU:00: registered as cooling_device0
[ 1.166744] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.166828] processor ACPI_CPU:01: registered as cooling_device1
[ 1.166833] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 1.169122] isapnp: Scanning for PnP cards...
[ 1.522811] isapnp: No Plug & Play device found
[ 1.533171] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.533262] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.533687] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.534661] brd: module loaded
[ 1.535081] loop: module loaded
[ 1.535171] Fixed MDIO Bus: probed
[ 1.535178] PPP generic driver version 2.4.2
[ 1.535255] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.535301] Driver 'sd' needs updating - please use bus_type methods
[ 1.535315] Driver 'sr' needs updating - please use bus_type methods
[ 1.535407] ata_piix 0000:00:1f.1: version 2.12
[ 1.535417] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.535430] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.535480] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.535579] scsi0 : ata_piix
[ 1.535702] scsi1 : ata_piix
[ 1.535758] ata1: PATA max UDMA/100 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 18
[ 1.535762] ata2: PATA max UDMA/100 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 18
[ 1.696524] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H55L, 1.03, max UDMA/66
[ 1.712421] ata1.00: configured for UDMA/66
[ 1.876494] ata2.00: ATAPI: _NEC DVD_RW ND-2510A, 2.18, max UDMA/33
[ 1.892401] ata2.00: configured for UDMA/33
[ 1.894492] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55L 1.03 PQ: 0 ANSI: 5
[ 1.898687] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.898692] Uniform CD-ROM driver Revision: 3.20
[ 1.898818] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.898882] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.899932] scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-2510A 2.18 PQ: 0 ANSI: 5
[ 1.902292] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.902368] sr 1:0:0:0: Attached scsi CD-ROM sr1
[ 1.902417] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.902441] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.902446] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 1.902499] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.902594] scsi2 : ata_piix
[ 1.902689] scsi3 : ata_piix
[ 1.904614] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.904618] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 2.068341] ata3.00: ATA-7: ST3250410AS, 4.AAA, max UDMA/133
[ 2.068344] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.084355] ata3.00: configured for UDMA/133
[ 2.248410] ata4.00: ATA-7: Hitachi HDT725032VLA360, V54OA52A, max UDMA/133
[ 2.248414] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.264438] ata4.00: configured for UDMA/133
[ 2.264542] scsi 2:0:0:0: Direct-Access ATA ST3250410AS 4.AA PQ: 0 ANSI: 5
[ 2.264670] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 2.264693] sd 2:0:0:0: [sda] Write Protect is off
[ 2.264697] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.264735] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.264813] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 2.264835] sd 2:0:0:0: [sda] Write Protect is off
[ 2.264839] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.264876] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.264881] sda: sda1 sda2 < sda5 >
[ 2.302657] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.302714] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.302808] scsi 3:0:0:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5
[ 2.302920] sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 2.302943] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.302946] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.302983] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.303055] sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 2.303076] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.303080] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.303117] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.303122] sdb: sdb1 sdb2
[ 2.317056] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.317109] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 2.317984] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.318014] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 2.318042] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.318047] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.318126] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.322038] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.322046] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 2.322063] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff800
[ 2.336014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.336110] usb usb1: configuration #1 chosen from 1 choice
[ 2.336150] hub 1-0:1.0: USB hub found
[ 2.336161] hub 1-0:1.0: 8 ports detected
[ 2.336320] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.336342] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.336385] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.336393] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.336397] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.336452] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.336482] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000cc00
[ 2.336575] usb usb2: configuration #1 chosen from 1 choice
[ 2.336608] hub 2-0:1.0: USB hub found
[ 2.336618] hub 2-0:1.0: 2 ports detected
[ 2.336722] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.336730] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.336734] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.336790] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.336820] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000
[ 2.336913] usb usb3: configuration #1 chosen from 1 choice
[ 2.336949] hub 3-0:1.0: USB hub found
[ 2.336958] hub 3-0:1.0: 2 ports detected
[ 2.337063] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.337070] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.337074] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.337129] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.337151] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
[ 2.337244] usb usb4: configuration #1 chosen from 1 choice
[ 2.337280] hub 4-0:1.0: USB hub found
[ 2.337289] hub 4-0:1.0: 2 ports detected
[ 2.337403] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.337410] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.337413] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.337475] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.337497] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d800
[ 2.337587] usb usb5: configuration #1 chosen from 1 choice
[ 2.337623] hub 5-0:1.0: USB hub found
[ 2.337632] hub 5-0:1.0: 2 ports detected
[ 2.337811] PNP: No PS/2 controller found. Probing ports directly.
[ 2.339881] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.339890] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.344054] mice: PS/2 mouse device common for all mice
[ 2.344246] rtc_cmos 00:04: RTC can wake from S4
[ 2.344297] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.344322] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.344405] device-mapper: uevent: version 1.0.3
[ 2.344535] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.344663] device-mapper: multipath: version 1.0.5 loaded
[ 2.344669] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.344783] EISA: Probing bus 0 at eisa.0
[ 2.344824] EISA: Detected 0 cards.
[ 2.344897] cpuidle: using governor ladder
[ 2.344903] cpuidle: using governor menu
[ 2.345676] TCP cubic registered
[ 2.345769] NET: Registered protocol family 10
[ 2.346410] lo: Disabled Privacy Extensions
[ 2.346923] NET: Registered protocol family 17
[ 2.346950] Bluetooth: L2CAP ver 2.11
[ 2.346953] Bluetooth: L2CAP socket layer initialized
[ 2.346956] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.346959] Bluetooth: SCO socket layer initialized
[ 2.347005] Bluetooth: RFCOMM socket layer initialized
[ 2.347016] Bluetooth: RFCOMM TTY layer initialized
[ 2.347020] Bluetooth: RFCOMM ver 1.10
[ 2.347089] Using IPI No-Shortcut mode
[ 2.347195] registered taskstats version 1
[ 2.347327] Magic number: 14:766:995
[ 2.347411] rtc_cmos 00:04: setting system clock to 2010-02-22 16:59:46 UTC (1266857986)
[ 2.347415] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.347417] EDD information not available.
[ 2.347833] Freeing unused kernel memory: 532k freed
[ 2.348016] Write protecting the kernel text: 4120k
[ 2.348088] Write protecting the kernel read-only data: 1524k
[ 2.613995] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[ 2.614002] Copyright (c) 1999-2006 Intel Corporation.
[ 2.614065] e1000 0000:02:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.614078] e1000 0000:02:01.0: setting latency timer to 64
[ 2.986923] e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:11:09:c3:84:a6
[ 2.994468] ohci1394 0000:03:09.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 3.161030] usb 1-6: new high speed USB device using ehci_hcd and address 4
[ 3.164104] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 3.197559] Floppy drive(s): fd0 is 1.44M
[ 3.217088] FDC 0 is a post-1991 82077
[ 3.293867] usb 1-6: configuration #1 chosen from 1 choice
[ 3.294036] hub 1-6:1.0: USB hub found
[ 3.294087] hub 1-6:1.0: 2 ports detected
[ 3.443622] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 3.540123] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 3.717253] usb 2-1: configuration #1 chosen from 1 choice
[ 3.728370] usbcore: registered new interface driver hiddev
[ 3.742493] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
[ 3.744963] generic-usb 0003:046D:C505.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
[ 3.774713] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input4
[ 3.780088] generic-usb 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
[ 3.780121] usbcore: registered new interface driver usbhid
[ 3.780129] usbhid: v2.6:USB HID core driver
[ 3.960020] usb 2-2: new full speed USB device using uhci_hcd and address 3
[ 4.112145] usb 2-2: configuration #1 chosen from 1 choice
[ 4.453148] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000777109]
[ 8.869612] kjournald starting. Commit interval 5 seconds
[ 8.869622] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.388011] udev: starting version 141
[ 13.557173] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.595559] parport_pc 00:09: reported by Plug and Play ACPI
[ 13.595680] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 13.604147] Linux agpgart interface v0.103
[ 13.611507] agpgart-intel 0000:00:00.0: Intel i875 Chipset
[ 13.628833] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 13.631495] intel_rng: FWH not detected
[ 13.652876] EDAC MC: Ver: 2.1.0 Jan 28 2010
[ 13.677709] EDAC i82875p: i82875p init one
[ 13.677749] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
[ 13.678691] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 13.678695] pci 0000:00:01.0: IO window: disabled
[ 13.678704] pci 0000:00:01.0: MEM window: 0xfa800000-0xfe8fffff
[ 13.678711] pci 0000:00:01.0: PREFETCH window: 0x000000bff00000-0x000000dfefffff
[ 13.678721] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 13.678726] pci 0000:00:03.0: IO window: 0xa000-0xafff
[ 13.678734] pci 0000:00:03.0: MEM window: 0xfe900000-0xfe9fffff
[ 13.678739] pci 0000:00:03.0: PREFETCH window: disabled
[ 13.678748] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 13.678753] pci 0000:00:1e.0: IO window: 0xb000-0xbfff
[ 13.678761] pci 0000:00:1e.0: MEM window: 0xfea00000-0xfeafffff
[ 13.678768] pci 0000:00:1e.0: PREFETCH window: disabled
[ 13.679080] EDAC MC0: Giving out device to 'i82875p_edac' 'i82875p': DEV 0000:00:00.0
[ 13.679252] EDAC PCI0: Giving out device to module 'i82875p_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
[ 13.904320] nvidia: module license 'NVIDIA' taints kernel.
[ 14.171410] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.172065] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
[ 14.182883] iTCO_vendor_support: vendor-support=0
[ 14.186019] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 14.186338] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
[ 14.186494] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.510340] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 14.524453] ppdev: user-space parallel port driver
[ 14.734924] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 14.735074] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 15.056014] intel8x0_measure_ac97_clock: measured 54621 usecs
[ 15.056018] intel8x0: clocking to 48000
[ 15.186570] lp0: using parport0 (interrupt-driven).
[ 15.390685] Adding 13799792k swap on /dev/sda5. Priority:-1 extents:1 across:13799792k
[ 15.758678] EXT3 FS on sda1, internal journal
[ 17.186824] type=1505 audit(1266854401.336:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2105
[ 17.239879] type=1505 audit(1266854401.388:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2109
[ 17.240044] type=1505 audit(1266854401.392:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2109
[ 17.240095] type=1505 audit(1266854401.392:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2109
[ 17.240144] type=1505 audit(1266854401.392:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2109
[ 17.387962] type=1505 audit(1266854401.536:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2114
[ 17.388205] type=1505 audit(1266854401.540:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2114
[ 17.421686] type=1505 audit(1266854401.572:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2118
[ 24.364100] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 24.364106] vboxdrv: Successfully done.
[ 24.364110] vboxdrv: Found 2 processor cores.
[ 24.364238] vboxdrv: fAsync=0 offMin=0x3d6 offMax=0x2a74
[ 24.364316] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 24.364320] vboxdrv: Successfully loaded version 3.0.4 (interface 0x000e0000).
[ 25.823138] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.823145] Bluetooth: BNEP filters: protocol multicast
[ 25.844233] Bridge firewalling registered
[ 28.049402] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 28.049435] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
[ 28.049496] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
[ 30.848593] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.852416] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 30.853428] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 41.568008] eth0: no IPv6 routers present
und "lsmod"
meister@meister-desktop:~$ lsmod
Module Size Used by
binfmt_misc 16776 1
bridge 56212 0
stp 10500 1 bridge
bnep 20224 2
vboxnetadp 88552 0
vboxnetflt 95240 0
vboxdrv 130344 1 vboxnetflt
input_polldev 11912 0
video 25872 0
output 11008 1 video
lp 17156 0
snd_intel8x0 37532 3
snd_ac97_codec 112292 1 snd_intel8x0
ac97_bus 9856 1 snd_ac97_codec
snd_pcm_oss 46336 0
snd_mixer_oss 22656 1 snd_pcm_oss
snd_pcm 83076 4 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 10756 0
snd_seq_oss 37760 0
snd_seq_midi 14336 0
snd_rawmidi 29696 1 snd_seq_midi
snd_seq_midi_event 15104 2 snd_seq_oss,snd_seq_midi
snd_seq 56880 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 29704 2 snd_pcm,snd_seq
snd_seq_device 14988 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 62756 15 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 15200 1 snd
psmouse 61972 0
ppdev 15620 0
pcspkr 10496 0
snd_page_alloc 16904 2 snd_intel8x0,snd_pcm
serio_raw 13444 0
iTCO_wdt 19108 0
iTCO_vendor_support 11652 1 iTCO_wdt
nvidia 7233756 36
i82875p_edac 13448 0
edac_core 47404 3 i82875p_edac
intel_agp 34108 1
agpgart 42696 2 nvidia,intel_agp
parport_pc 40100 1
parport 42220 3 lp,ppdev,parport_pc
shpchp 40212 0
usbhid 42336 0
floppy 64324 0
ohci1394 38576 0
ieee1394 94660 1 ohci1394
e1000 130500 0
fbcon 46112 0
tileblit 10752 1 fbcon
font 16384 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit allerdings bekomme ich mit scanimage jetzt schon ein besseres Ergebnis als in meinem ersten Beitrag meister@meister-desktop:~$ scanimage -L
device `gt68xx:libusb:002:003' is a „Plustek“ „OpticSlim flatbed scanner
meister@meister-desktop:~$
|
|
Benno-007
Anmeldungsdatum:
28. August 2007
Beiträge: 29240
Wohnort: Germany
|
Das hab ich bemerkt, dass du schon weiter warst als ich (im Wiki). Bei dmesg seh ich am Ende und per Suchfunktion nix vom Scanner - man müßte direkt nach dem Anstecken mal schauen. Aber du bist ja nun schon weiter, schaden kann es trotzdem nicht. Bei lsmod sehe ich auf die Schnelle nix vom Scanner, sane-gt68xx sehe ich auch nicht: Oder taucht das vielleicht als Prozeß auf?
ps aux | grep -i sane-gt68
|
|
fredvomjupiter
(Themenstarter)
Anmeldungsdatum:
30. Januar 2009
Beiträge: 330
Wohnort: Saarland
|
hier dmesg, nachdem der USB Stecker am Scanner gerade eingesteckt wurde [ 0.448445] ACPI: bus type pci registered
[ 0.452006] PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=3
[ 0.452010] PCI: Using configuration type 1 for base access
[ 0.453220] ACPI: EC: Look up EC in DSDT
[ 0.461104] ACPI: Interpreter enabled
[ 0.461111] ACPI: (supports S0 S1 S4 S5)
[ 0.461136] ACPI: Using IOAPIC for interrupt routing
[ 0.466353] ACPI: No dock devices found.
[ 0.466369] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.466432] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xefffffff]
[ 0.466593] pci 0000:00:1d.0: reg 20 io port: [0xcc00-0xcc1f]
[ 0.466648] pci 0000:00:1d.1: reg 20 io port: [0xd000-0xd01f]
[ 0.466703] pci 0000:00:1d.2: reg 20 io port: [0xd400-0xd41f]
[ 0.466757] pci 0000:00:1d.3: reg 20 io port: [0xd800-0xd81f]
[ 0.467282] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebff800-0xfebffbff]
[ 0.467331] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.467336] pci 0000:00:1d.7: PME# disabled
[ 0.467429] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.467435] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 0.467439] pci 0000:00:1f.0: quirk: region 0400-043f claimed by ICH4 GPIO
[ 0.467461] pci 0000:00:1f.1: reg 10 io port: [0xec00-0xec07]
[ 0.467469] pci 0000:00:1f.1: reg 14 io port: [0xe800-0xe803]
[ 0.467477] pci 0000:00:1f.1: reg 18 io port: [0xe400-0xe407]
[ 0.467484] pci 0000:00:1f.1: reg 1c io port: [0xe000-0xe003]
[ 0.467492] pci 0000:00:1f.1: reg 20 io port: [0xdc00-0xdc0f]
[ 0.467500] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.467529] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.467536] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.467543] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.467550] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.467557] pci 0000:00:1f.2: reg 20 io port: [0xfc00-0xfc0f]
[ 0.467611] pci 0000:00:1f.3: reg 20 io port: [0xc00-0xc1f]
[ 0.467656] pci 0000:00:1f.5: reg 10 io port: [0xc800-0xc8ff]
[ 0.467663] pci 0000:00:1f.5: reg 14 io port: [0xc400-0xc43f]
[ 0.467670] pci 0000:00:1f.5: reg 18 32bit mmio: [0xfebff600-0xfebff7ff]
[ 0.467678] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xfebff500-0xfebff5ff]
[ 0.467702] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.467706] pci 0000:00:1f.5: PME# disabled
[ 0.467754] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[ 0.467762] pci 0000:01:00.0: reg 14 32bit mmio: [0xc0000000-0xcfffffff]
[ 0.467770] pci 0000:01:00.0: reg 18 32bit mmio: [0xfc000000-0xfcffffff]
[ 0.467792] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe8e0000-0xfe8fffff]
[ 0.467846] pci 0000:00:01.0: bridge 32bit mmio: [0xfa800000-0xfe8fffff]
[ 0.467851] pci 0000:00:01.0: bridge 32bit mmio pref: [0xbff00000-0xdfefffff]
[ 0.467884] pci 0000:02:01.0: reg 10 32bit mmio: [0xfe9e0000-0xfe9fffff]
[ 0.467896] pci 0000:02:01.0: reg 18 io port: [0xac00-0xac1f]
[ 0.467922] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
[ 0.467927] pci 0000:02:01.0: PME# disabled
[ 0.467967] pci 0000:00:03.0: bridge io port: [0xa000-0xafff]
[ 0.467972] pci 0000:00:03.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[ 0.468030] pci 0000:03:09.0: reg 10 32bit mmio: [0xfeaff800-0xfeafffff]
[ 0.468038] pci 0000:03:09.0: reg 14 io port: [0xbc00-0xbc7f]
[ 0.468073] pci 0000:03:09.0: supports D2
[ 0.468076] pci 0000:03:09.0: PME# supported from D2 D3hot D3cold
[ 0.468081] pci 0000:03:09.0: PME# disabled
[ 0.468115] pci 0000:00:1e.0: transparent bridge
[ 0.468120] pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff]
[ 0.468125] pci 0000:00:1e.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.468145] bus 00 -> node 0
[ 0.468153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.468351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
[ 0.472171] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.472314] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.472457] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.472663] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.472807] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.472950] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.473092] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.473295] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 12 14 15)
[ 0.473410] ACPI: Power Resource [URP1] (off)
[ 0.473454] ACPI: Power Resource [URP2] (off)
[ 0.473499] ACPI: Power Resource [FDDP] (off)
[ 0.473543] ACPI: Power Resource [LPTP] (off)
[ 0.473641] ACPI: WMI: Mapper loaded
[ 0.473704] SCSI subsystem initialized
[ 0.473704] libata version 3.00 loaded.
[ 0.473704] usbcore: registered new interface driver usbfs
[ 0.473704] usbcore: registered new interface driver hub
[ 0.473704] usbcore: registered new device driver usb
[ 0.473704] PCI: Using ACPI for IRQ routing
[ 0.480015] Bluetooth: Core ver 2.13
[ 0.480034] NET: Registered protocol family 31
[ 0.480034] Bluetooth: HCI device and connection manager initialized
[ 0.480034] Bluetooth: HCI socket layer initialized
[ 0.480034] NET: Registered protocol family 8
[ 0.480035] NET: Registered protocol family 20
[ 0.480051] NetLabel: Initializing
[ 0.480053] NetLabel: domain hash size = 128
[ 0.480055] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.480078] NetLabel: unlabeled traffic allowed by default
[ 0.480180] hpet clockevent registered
[ 0.480184] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.480190] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.480197] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.484087] AppArmor: AppArmor Filesystem Enabled
[ 0.492015] pnp: PnP ACPI init
[ 0.492029] ACPI: bus type pnp registered
[ 0.495595] pnp: PnP ACPI: found 11 devices
[ 0.495598] ACPI: ACPI bus type pnp unregistered
[ 0.495603] PnPBIOS: Disabled by ACPI PNP
[ 0.495617] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.495621] system 00:01: ioport range 0x3f0-0x3f1 has been reserved
[ 0.495624] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.495627] system 00:01: ioport range 0x400-0x43f has been reserved
[ 0.495631] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.495635] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.530400] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.530403] pci 0000:00:01.0: IO window: disabled
[ 0.530410] pci 0000:00:01.0: MEM window: 0xfa800000-0xfe8fffff
[ 0.530415] pci 0000:00:01.0: PREFETCH window: 0x000000bff00000-0x000000dfefffff
[ 0.530422] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 0.530426] pci 0000:00:03.0: IO window: 0xa000-0xafff
[ 0.530431] pci 0000:00:03.0: MEM window: 0xfe900000-0xfe9fffff
[ 0.530436] pci 0000:00:03.0: PREFETCH window: disabled
[ 0.530442] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.530446] pci 0000:00:1e.0: IO window: 0xb000-0xbfff
[ 0.530452] pci 0000:00:1e.0: MEM window: 0xfea00000-0xfeafffff
[ 0.530457] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.530479] pci 0000:00:1e.0: setting latency timer to 64
[ 0.530485] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.530488] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.530491] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.530493] bus: 01 index 1 mmio: [0xfa800000-0xfe8fffff]
[ 0.530496] bus: 01 index 2 mmio: [0xbff00000-0xdfefffff]
[ 0.530499] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.530501] bus: 02 index 0 io port: [0xa000-0xafff]
[ 0.530504] bus: 02 index 1 mmio: [0xfe900000-0xfe9fffff]
[ 0.530506] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.530508] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.530511] bus: 03 index 0 io port: [0xb000-0xbfff]
[ 0.530514] bus: 03 index 1 mmio: [0xfea00000-0xfeafffff]
[ 0.530516] bus: 03 index 2 mmio: [0x0-0x0]
[ 0.530519] bus: 03 index 3 io port: [0x00-0xffff]
[ 0.530521] bus: 03 index 4 mmio: [0x000000-0xffffffff]
[ 0.530530] NET: Registered protocol family 2
[ 0.544081] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.544468] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.544960] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.545339] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.545342] TCP reno registered
[ 0.552124] NET: Registered protocol family 1
[ 0.552301] checking if image is initramfs... it is
[ 0.980517] Switched to high resolution mode on CPU 1
[ 0.984033] Switched to high resolution mode on CPU 0
[ 1.151366] Freeing initrd memory: 7381k freed
[ 1.151617] cpufreq: No nForce2 chipset.
[ 1.151793] audit: initializing netlink socket (disabled)
[ 1.151822] type=2000 audit(1266944105.149:1): initialized
[ 1.159851] highmem bounce pool size: 64 pages
[ 1.159858] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.161551] VFS: Disk quotas dquot_6.5.1
[ 1.161635] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.162457] fuse init (API version 7.10)
[ 1.162568] msgmni has been set to 1685
[ 1.162804] alg: No test for stdrng (krng)
[ 1.162829] io scheduler noop registered
[ 1.162832] io scheduler anticipatory registered
[ 1.162834] io scheduler deadline registered
[ 1.162853] io scheduler cfq registered (default)
[ 1.162974] pci 0000:01:00.0: Boot video device
[ 1.166299] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.166313] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.166474] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.166478] ACPI: Power Button (FF) [PWRF]
[ 1.166539] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.166543] ACPI: Power Button (CM) [PWRB]
[ 1.166824] processor ACPI_CPU:00: registered as cooling_device0
[ 1.166830] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.166914] processor ACPI_CPU:01: registered as cooling_device1
[ 1.166920] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 1.169185] isapnp: Scanning for PnP cards...
[ 1.522908] isapnp: No Plug & Play device found
[ 1.533172] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.533264] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.533689] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.534661] brd: module loaded
[ 1.535079] loop: module loaded
[ 1.535170] Fixed MDIO Bus: probed
[ 1.535177] PPP generic driver version 2.4.2
[ 1.535254] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.535301] Driver 'sd' needs updating - please use bus_type methods
[ 1.535314] Driver 'sr' needs updating - please use bus_type methods
[ 1.535408] ata_piix 0000:00:1f.1: version 2.12
[ 1.535418] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.535431] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.535481] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.535580] scsi0 : ata_piix
[ 1.535706] scsi1 : ata_piix
[ 1.535762] ata1: PATA max UDMA/100 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 18
[ 1.535766] ata2: PATA max UDMA/100 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 18
[ 1.696523] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H55L, 1.03, max UDMA/66
[ 1.712470] ata1.00: configured for UDMA/66
[ 1.876496] ata2.00: ATAPI: _NEC DVD_RW ND-2510A, 2.18, max UDMA/33
[ 1.892427] ata2.00: configured for UDMA/33
[ 1.894543] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55L 1.03 PQ: 0 ANSI: 5
[ 1.898619] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.898624] Uniform CD-ROM driver Revision: 3.20
[ 1.898751] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.898815] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.899761] scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-2510A 2.18 PQ: 0 ANSI: 5
[ 1.902220] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.902297] sr 1:0:0:0: Attached scsi CD-ROM sr1
[ 1.902346] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.902370] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.902375] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 1.902428] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.902525] scsi2 : ata_piix
[ 1.902621] scsi3 : ata_piix
[ 1.904517] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.904520] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 2.068334] ata3.00: ATA-7: ST3250410AS, 4.AAA, max UDMA/133
[ 2.068338] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.084373] ata3.00: configured for UDMA/133
[ 2.248418] ata4.00: ATA-7: Hitachi HDT725032VLA360, V54OA52A, max UDMA/133
[ 2.248421] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.264445] ata4.00: configured for UDMA/133
[ 2.264547] scsi 2:0:0:0: Direct-Access ATA ST3250410AS 4.AA PQ: 0 ANSI: 5
[ 2.264676] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 2.264700] sd 2:0:0:0: [sda] Write Protect is off
[ 2.264703] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.264741] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.264819] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 2.264841] sd 2:0:0:0: [sda] Write Protect is off
[ 2.264845] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.264882] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.264887] sda: sda1 sda2 < sda5 >
[ 2.307709] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.307766] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.307858] scsi 3:0:0:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5
[ 2.307969] sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 2.307992] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.307996] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.308060] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.308132] sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 2.308153] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.308157] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.308194] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.308199] sdb: sdb1 sdb2
[ 2.325196] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.325250] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 2.326132] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.326162] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 2.326191] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.326196] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.326275] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.330197] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.330205] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 2.330222] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff800
[ 2.344015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.344112] usb usb1: configuration #1 chosen from 1 choice
[ 2.344152] hub 1-0:1.0: USB hub found
[ 2.344163] hub 1-0:1.0: 8 ports detected
[ 2.344322] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.344344] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.344386] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.344395] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.344399] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.344453] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.344483] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000cc00
[ 2.344576] usb usb2: configuration #1 chosen from 1 choice
[ 2.344609] hub 2-0:1.0: USB hub found
[ 2.344619] hub 2-0:1.0: 2 ports detected
[ 2.344723] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.344731] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.344736] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.344792] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.344821] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000
[ 2.344914] usb usb3: configuration #1 chosen from 1 choice
[ 2.344950] hub 3-0:1.0: USB hub found
[ 2.344959] hub 3-0:1.0: 2 ports detected
[ 2.345064] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.345071] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.345075] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.345129] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.345152] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
[ 2.345244] usb usb4: configuration #1 chosen from 1 choice
[ 2.345279] hub 4-0:1.0: USB hub found
[ 2.345289] hub 4-0:1.0: 2 ports detected
[ 2.345402] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.345409] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.345413] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.345474] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.345496] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d800
[ 2.345587] usb usb5: configuration #1 chosen from 1 choice
[ 2.345622] hub 5-0:1.0: USB hub found
[ 2.345632] hub 5-0:1.0: 2 ports detected
[ 2.345813] PNP: No PS/2 controller found. Probing ports directly.
[ 2.347881] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.347890] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.352057] mice: PS/2 mouse device common for all mice
[ 2.364097] rtc_cmos 00:04: RTC can wake from S4
[ 2.364145] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.364171] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.364257] device-mapper: uevent: version 1.0.3
[ 2.364385] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.364514] device-mapper: multipath: version 1.0.5 loaded
[ 2.364519] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.364631] EISA: Probing bus 0 at eisa.0
[ 2.364672] EISA: Detected 0 cards.
[ 2.364746] cpuidle: using governor ladder
[ 2.364751] cpuidle: using governor menu
[ 2.365525] TCP cubic registered
[ 2.365617] NET: Registered protocol family 10
[ 2.366255] lo: Disabled Privacy Extensions
[ 2.366768] NET: Registered protocol family 17
[ 2.366796] Bluetooth: L2CAP ver 2.11
[ 2.366799] Bluetooth: L2CAP socket layer initialized
[ 2.366802] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.366804] Bluetooth: SCO socket layer initialized
[ 2.366850] Bluetooth: RFCOMM socket layer initialized
[ 2.366861] Bluetooth: RFCOMM TTY layer initialized
[ 2.366865] Bluetooth: RFCOMM ver 1.10
[ 2.366931] Using IPI No-Shortcut mode
[ 2.367038] registered taskstats version 1
[ 2.367171] Magic number: 14:291:945
[ 2.367208] tty tty2: hash matches
[ 2.367254] rtc_cmos 00:04: setting system clock to 2010-02-23 16:55:06 UTC (1266944106)
[ 2.367258] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.367261] EDD information not available.
[ 2.367679] Freeing unused kernel memory: 532k freed
[ 2.367861] Write protecting the kernel text: 4120k
[ 2.367926] Write protecting the kernel read-only data: 1524k
[ 2.628055] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[ 2.628060] Copyright (c) 1999-2006 Intel Corporation.
[ 2.628152] e1000 0000:02:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.628164] e1000 0000:02:01.0: setting latency timer to 64
[ 2.885027] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 2.991064] e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:11:09:c3:84:a6
[ 3.169679] ohci1394 0000:03:09.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 3.222559] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 3.252788] usb 1-2: configuration #1 chosen from 1 choice
[ 3.253165] hub 1-2:1.0: USB hub found
[ 3.253488] hub 1-2:1.0: 4 ports detected
[ 3.325147] Floppy drive(s): fd0 is 1.44M
[ 3.346160] FDC 0 is a post-1991 82077
[ 3.369060] usb 1-6: new high speed USB device using ehci_hcd and address 4
[ 3.423496] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 3.541608] usb 1-6: configuration #1 chosen from 1 choice
[ 3.541775] hub 1-6:1.0: USB hub found
[ 3.541966] hub 1-6:1.0: 2 ports detected
[ 3.780019] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 3.957370] usb 2-1: configuration #1 chosen from 1 choice
[ 3.970784] usbcore: registered new interface driver hiddev
[ 3.984606] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
[ 3.992124] generic-usb 0003:046D:C505.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
[ 4.021828] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input4
[ 4.029377] generic-usb 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
[ 4.029417] usbcore: registered new interface driver usbhid
[ 4.029424] usbhid: v2.6:USB HID core driver
[ 4.032394] usb 1-2.2: new full speed USB device using ehci_hcd and address 5
[ 4.125082] usb 1-2.2: configuration #1 chosen from 1 choice
[ 4.196349] usb 1-2.4: new high speed USB device using ehci_hcd and address 6
[ 4.289555] usb 1-2.4: configuration #1 chosen from 1 choice
[ 4.289893] hub 1-2.4:1.0: USB hub found
[ 4.290197] hub 1-2.4:1.0: 4 ports detected
[ 4.564208] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000777109]
[ 8.842103] kjournald starting. Commit interval 5 seconds
[ 8.842122] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.277716] udev: starting version 141
[ 13.438740] parport_pc 00:09: reported by Plug and Play ACPI
[ 13.438862] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 13.457220] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.469303] Linux agpgart interface v0.103
[ 13.479479] agpgart-intel 0000:00:00.0: Intel i875 Chipset
[ 13.494969] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 13.510119] EDAC MC: Ver: 2.1.0 Jan 28 2010
[ 13.526502] EDAC i82875p: i82875p init one
[ 13.526544] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
[ 13.527134] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 13.527139] pci 0000:00:01.0: IO window: disabled
[ 13.527147] pci 0000:00:01.0: MEM window: 0xfa800000-0xfe8fffff
[ 13.527154] pci 0000:00:01.0: PREFETCH window: 0x000000bff00000-0x000000dfefffff
[ 13.527164] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 13.527169] pci 0000:00:03.0: IO window: 0xa000-0xafff
[ 13.527177] pci 0000:00:03.0: MEM window: 0xfe900000-0xfe9fffff
[ 13.527183] pci 0000:00:03.0: PREFETCH window: disabled
[ 13.527193] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 13.527199] pci 0000:00:1e.0: IO window: 0xb000-0xbfff
[ 13.527208] pci 0000:00:1e.0: MEM window: 0xfea00000-0xfeafffff
[ 13.527214] pci 0000:00:1e.0: PREFETCH window: disabled
[ 13.527390] EDAC MC0: Giving out device to 'i82875p_edac' 'i82875p': DEV 0000:00:00.0
[ 13.527439] EDAC PCI0: Giving out device to module 'i82875p_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
[ 13.872581] nvidia: module license 'NVIDIA' taints kernel.
[ 14.132897] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.133699] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
[ 14.180581] intel_rng: FWH not detected
[ 14.373017] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 14.414265] ppdev: user-space parallel port driver
[ 14.497061] iTCO_vendor_support: vendor-support=0
[ 14.521921] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 14.522145] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
[ 14.522303] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.699690] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 14.699843] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 15.020013] intel8x0_measure_ac97_clock: measured 54612 usecs
[ 15.020016] intel8x0: clocking to 48000
[ 15.178632] lp0: using parport0 (interrupt-driven).
[ 15.380542] Adding 13799792k swap on /dev/sda5. Priority:-1 extents:1 across:13799792k
[ 15.716807] EXT3 FS on sda1, internal journal
[ 17.121907] type=1505 audit(1266940521.253:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2125
[ 17.175184] type=1505 audit(1266940521.305:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2129
[ 17.175337] type=1505 audit(1266940521.305:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2129
[ 17.175391] type=1505 audit(1266940521.305:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2129
[ 17.175439] type=1505 audit(1266940521.305:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2129
[ 17.322526] type=1505 audit(1266940521.453:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2134
[ 17.322745] type=1505 audit(1266940521.453:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2134
[ 17.356204] type=1505 audit(1266940521.485:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2138
[ 24.296772] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 24.296778] vboxdrv: Successfully done.
[ 24.296782] vboxdrv: Found 2 processor cores.
[ 24.296914] vboxdrv: fAsync=0 offMin=0x3d7 offMax=0x352c
[ 24.296992] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 24.296997] vboxdrv: Successfully loaded version 3.0.4 (interface 0x000e0000).
[ 25.705787] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.705794] Bluetooth: BNEP filters: protocol multicast
[ 25.727198] Bridge firewalling registered
[ 28.165453] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 28.165484] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
[ 28.165551] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
[ 30.867786] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.868416] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 30.871900] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 41.275836] eth0: no IPv6 routers present
[ 2117.577110] usb 1-2.2: USB disconnect, address 5
[ 2125.508341] usb 1-2.4.4: new full speed USB device using ehci_hcd and address 7
[ 2126.133104] usb 1-2.4.4: configuration #1 chosen from 1 choice
[ 2171.503416] usb 1-2.4.4: USB disconnect, address 7
[ 2183.696350] usb 1-2.2: new full speed USB device using ehci_hcd and address 8
[ 2184.324989] usb 1-2.2: configuration #1 chosen from 1 choice
[ 2220.438296] usb 1-2.2: USB disconnect, address 8
[ 2226.808324] usb 1-2.4.4: new full speed USB device using ehci_hcd and address 9
[ 2227.445078] usb 1-2.4.4: configuration #1 chosen from 1 choice
[ 2262.168116] usb 1-2.4.4: USB disconnect, address 9
[ 2279.412368] usb 1-2.4.4: new full speed USB device using ehci_hcd and address 10
[ 2280.049000] usb 1-2.4.4: configuration #1 chosen from 1 choice
[ 2392.603737] usb 1-2.4.4: USB disconnect, address 10
[ 2405.956242] usb 1-2.4.4: new full speed USB device using ehci_hcd and address 11
[ 2406.593138] usb 1-2.4.4: configuration #1 chosen from 1 choice
[ 2425.896648] usb 1-2.4.4: USB disconnect, address 11
[ 2431.064319] usb 1-2.4.4: new full speed USB device using ehci_hcd and address 12
[ 2431.749081] usb 1-2.4.4: configuration #1 chosen from 1 choice
[ 2449.444853] usb 1-2.4.4: USB disconnect, address 12
[ 2458.892319] usb 1-2.4.4: new full speed USB device using ehci_hcd and address 13
[ 2459.528959] usb 1-2.4.4: configuration #1 chosen from 1 choice
[ 2496.594110] usb 1-2.4.4: USB disconnect, address 13
[ 2506.952310] usb 1-2.4.4: new full speed USB device using ehci_hcd and address 14
[ 2507.588952] usb 1-2.4.4: configuration #1 chosen from 1 choice
[ 2538.663816] usb 1-2.4.4: USB disconnect, address 14
[ 2550.968271] usb 1-2.4.4: new full speed USB device using ehci_hcd and address 15
[ 2551.601163] usb 1-2.4.4: configuration #1 chosen from 1 choice
meister@meister-desktop:~$ und hier lsmod, direkt nach dem Neuverbinden des Scanners meister@meister-desktop:~$ lsmod
Module Size Used by
binfmt_misc 16776 1
bridge 56212 0
stp 10500 1 bridge
bnep 20224 2
vboxnetadp 88552 0
vboxnetflt 95240 0
vboxdrv 130344 1 vboxnetflt
input_polldev 11912 0
video 25872 0
output 11008 1 video
lp 17156 0
snd_intel8x0 37532 2
snd_ac97_codec 112292 1 snd_intel8x0
ac97_bus 9856 1 snd_ac97_codec
snd_pcm_oss 46336 0
snd_mixer_oss 22656 1 snd_pcm_oss
snd_pcm 83076 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 10756 0
snd_seq_oss 37760 0
snd_seq_midi 14336 0
snd_rawmidi 29696 1 snd_seq_midi
snd_seq_midi_event 15104 2 snd_seq_oss,snd_seq_midi
snd_seq 56880 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 29704 2 snd_pcm,snd_seq
snd_seq_device 14988 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
iTCO_wdt 19108 0
snd 62756 14 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
iTCO_vendor_support 11652 1 iTCO_wdt
psmouse 61972 0
soundcore 15200 1 snd
ppdev 15620 0
pcspkr 10496 0
serio_raw 13444 0
snd_page_alloc 16904 2 snd_intel8x0,snd_pcm
nvidia 7233756 36
i82875p_edac 13448 0
edac_core 47404 3 i82875p_edac
intel_agp 34108 1
agpgart 42696 2 nvidia,intel_agp
shpchp 40212 0
parport_pc 40100 1
parport 42220 3 lp,ppdev,parport_pc
usbhid 42336 0
floppy 64324 0
ohci1394 38576 0
ieee1394 94660 1 ohci1394
e1000 130500 0
fbcon 46112 0
tileblit 10752 1 fbcon
font 16384 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit
meister@meister-desktop:~$ und dann noch die Prozesse meister@meister-desktop:~$ ps aux | grep -i sane-gt68
meister 5710 0.0 0.0 3344 884 pts/0 S+ 17:38 0:00 grep -i sane-gt68
meister@meister-desktop:~$ ich habe leider keine Idee mehr was ich noch tun soll
|
|
Benno-007
Anmeldungsdatum:
28. August 2007
Beiträge: 29240
Wohnort: Germany
|
Hast du schon alles ausprobiert? Vor allem fallen mir da noch auf:
sane-find-scanner
# dort auch den Chip prüfen
sudo lshw | grep -i plustek -A 10
# alles zur Konfiguration durcharbeiten, wenn der Chip zu sane-gt68xx paßt.
# ggf. zunächst nur das naheliegendste lesen und ausprobieren.
man sane-gt68xx
(Nicht vollständige Liste fehlender Versuche/ Ergebnisse.) Ein bißchen Geduld brauchst du noch. 😉 Wünsche dir viel Erfolg.
|
|
fredvomjupiter
(Themenstarter)
Anmeldungsdatum:
30. Januar 2009
Beiträge: 330
Wohnort: Saarland
|
Ich mache ich heute wieder ran und poste meine Ergebnisse, hatte gestern ein kleines "Tief".
Vielen Dank für deine tolle Hilfe bis jetzt, ohne die wäre ich immer noch am Anfang 👍
|
|
Benno-007
Anmeldungsdatum:
28. August 2007
Beiträge: 29240
Wohnort: Germany
|
Na nu übertreib mal nicht: Eigentlich kam ich mir bisher relativ nutzlos in dem Thema vor - außer, dass ich einiges über Sane kennengelernt hab, was du eh schon wußtest. 😉 Vielleicht lernst du daraus zumindest, dass man sich ein bißchen durch die Manpages beißen muß. 😉 Achja, interessant wäre mal noch, als Reaktion auf meine Frage, ob es vielleicht ein Sane-Log gibt (direkt nach deinen Versuchen!):
cat /var/log/syslog
und zur Sicherheit, ob es vielleicht weitere (Sane-)Logs gibt:
ls -a /var/log
|
|
fredvomjupiter
(Themenstarter)
Anmeldungsdatum:
30. Januar 2009
Beiträge: 330
Wohnort: Saarland
|
Von Sane hatte bis jetzt noch keinen Schimmer, hab nur nach dem WIKI gehandelt und dann mal noch deine Tip's ausprobiert:
Jetzt aber weiter im Thema ⮷ meister@meister-desktop:~$ sudo sane-find-scanner
[sudo] password for meister:
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x07b3, product=0x0413 [600dpi USB Scanner], chip=GT-6816) at libusb:001:006
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
meister@meister-desktop:~$ log1 meister@meister-desktop:~$ cat /var/log/syslog
Feb 24 18:14:19 meister-desktop syslogd 1.5.0#5ubuntu3: restart.
Feb 24 18:14:19 meister-desktop anacron[3351]: Job `cron.daily' terminated
Feb 24 18:14:19 meister-desktop anacron[3351]: Job `cron.weekly' started
Feb 24 18:14:19 meister-desktop anacron[4787]: Updated timestamp for job `cron.weekly' to 2010-02-24
Feb 24 18:15:43 meister-desktop syslogd 1.5.0#5ubuntu3: restart.
Feb 24 18:15:43 meister-desktop anacron[3351]: Job `cron.weekly' terminated
Feb 24 18:15:43 meister-desktop anacron[3351]: Normal exit (2 jobs run)
Feb 24 18:17:01 meister-desktop /USR/SBIN/CRON[5047]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Feb 24 18:20:01 meister-desktop /USR/SBIN/CRON[5116]: (root) CMD ([ -x /usr/sbin/update-motd ] && /usr/sbin/update-motd 2>/dev/null)
Feb 24 18:30:01 meister-desktop /USR/SBIN/CRON[5245]: (root) CMD ([ -x /usr/sbin/update-motd ] && /usr/sbin/update-motd 2>/dev/null)
Feb 24 18:34:50 meister-desktop kernel: [ 3107.096272] usb 1-2.4.4: new full speed USB device using ehci_hcd and address 6
Feb 24 18:34:51 meister-desktop kernel: [ 3107.753236] usb 1-2.4.4: configuration #1 chosen from 1 choice
meister@meister-desktop:~$ die Suche nach weiteren Log Dateien zeigt dies hier meister@meister-desktop:~$ ls -a /var/log
. dpkg.log.2.gz mail.log.3.gz
.. dpkg.log.3.gz mail.warn
apparmor dpkg.log.4.gz messages
apt dpkg.log.5.gz messages.0
aptitude dpkg.log.6.gz messages.1.gz
aptitude.1.gz dpkg.log.7.gz messages.2.gz
auth.log dpkg.log.8.gz messages.3.gz
auth.log.0 faillog news
auth.log.1.gz fontconfig.log partimage
auth.log.2.gz fsck pm-powersave.log
auth.log.3.gz gdm pm-suspend.log
boot installer pycentral.log
bootstrap.log jockey.log samba
btmp jockey.log.1 syslog
btmp.1 jockey.log.10.gz syslog.0
checkbox.log jockey.log.2.gz syslog.1.gz
checkbox.log.1 jockey.log.3.gz syslog.2.gz
checkbox.log.2.gz jockey.log.4.gz syslog.3.gz
checkbox.log.3.gz jockey.log.5.gz syslog.4.gz
ConsoleKit jockey.log.6.gz syslog.5.gz
cups jockey.log.7.gz syslog.6.gz
daemon.log jockey.log.8.gz udev
daemon.log.0 jockey.log.9.gz unattended-upgrades
daemon.log.1.gz kern.log user.log
daemon.log.2.gz kern.log.0 user.log.0
daemon.log.3.gz kern.log.1.gz user.log.1.gz
debug kern.log.2.gz user.log.2.gz
debug.0 kern.log.3.gz user.log.3.gz
debug.1.gz kern.log.4.gz vbox-install.log
debug.2.gz lastlog wpa_supplicant.log
debug.3.gz lpr.log wpa_supplicant.log.1.gz
dist-upgrade mail.err wpa_supplicant.log.2.gz
dkms_autoinstaller mail.info wpa_supplicant.log.3.gz
dmesg mail.info.0 wpa_supplicant.log.4.gz
dmesg.0 mail.info.1.gz wpa_supplicant.log.5.gz
dmesg.1.gz mail.info.2.gz wtmp
dmesg.2.gz mail.info.3.gz wtmp.1
dmesg.3.gz mail.log Xorg.0.log
dmesg.4.gz mail.log.0 Xorg.0.log.old
dpkg.log mail.log.1.gz Xorg.20.log
dpkg.log.1 mail.log.2.gz
meister@meister-desktop:~$
hoffe du kannst damit etwas anfangen
|
|
Benno-007
Anmeldungsdatum:
28. August 2007
Beiträge: 29240
Wohnort: Germany
|
Der lshw-Befehl meines vorherigen Posts fehlt noch - der zeigt an, was es so zum Plustek zu sagen gibt (auch wenn der Chip schon bei sane-find-scanner steht). Und dann mußt du mal selber die Manpage, die ich dort auch genannt habe, durchgucken. Kannst ja dann mal deine Zwischenergebnisse posten. Bringt mir jetzt auch nichts, ziellos Manpages ganz spezieller Scannertreiber bestimmter Hardware zu erlernen. 😉
|
|
fredvomjupiter
(Themenstarter)
Anmeldungsdatum:
30. Januar 2009
Beiträge: 330
Wohnort: Saarland
|
Dann hier auch noch das Ergebnis von lshw meister@meister-desktop:~$ sudo lshw
meister-desktop
description: Desktop Computer
product: MS-6758
vendor: MICRO-STAR INC.
version: 2.00
serial: 00000000
width: 32 bits
capabilities: smbios-2.3 dmi-2.3 smp-1.4 smp
configuration: chassis=desktop cpus=1
*-core
description: Motherboard
product: MS-6758
vendor: MICRO-STAR INC.
physical id: 0
version: 2.00
serial: 00000000
slot: v
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: V3.6 (10/08/2004)
size: 64KiB
capacity: 448KiB
capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int17printer int10video acpi usb agp ls120boot zipboot biosbootspecification
*-cpu
description: CPU
product: Intel(R) Pentium(R) 4 CPU 3.00GHz
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: 15.3.3
serial: 0000-0F33-0000-0000-0000-0000
slot: FC-478
size: 3GHz
capacity: 4GHz
width: 32 bits
clock: 200MHz
capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe constant_tsc pebs bts pni dtes64 monitor ds_cpl cid
configuration: id=1
*-cache:0
description: L1 cache
physical id: 5
slot: Internal Cache
size: 48KiB
capacity: 1MiB
capabilities: pipeline-burst synchronous internal write-back data
*-cache:1
description: L2 cache
physical id: 6
slot: Internal Cache
size: 1MiB
capacity: 1MiB
capabilities: synchronous internal write-back unified
*-logicalcpu:0
description: Logical CPU
physical id: 1.1
width: 32 bits
capabilities: logical
*-logicalcpu:1
description: Logical CPU
physical id: 1.2
width: 32 bits
capabilities: logical
*-memory
description: System memory
physical id: 1
size: 2519MiB
*-pci
description: Host bridge
product: 82875P/E7210 Memory Controller Hub
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 02
width: 32 bits
clock: 33MHz
configuration: driver=agpgart-intel module=intel_agp
*-pci:0
description: PCI bridge
product: 82875P Processor to AGP Controller
vendor: Intel Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: 02
width: 32 bits
clock: 66MHz
capabilities: pci bus_master
*-display
description: VGA compatible controller
product: GeForce 7600 GT
vendor: nVidia Corporation
physical id: 0
bus info: pci@0000:01:00.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm agp agp-3.0 bus_master cap_list
configuration: driver=nvidia latency=248 maxlatency=1 mingnt=5 module=nvidia
*-pci:1
description: PCI bridge
product: 82875P/E7210 Processor to PCI to CSA Bridge
vendor: Intel Corporation
physical id: 3
bus info: pci@0000:00:03.0
version: 02
width: 32 bits
clock: 66MHz
capabilities: pci bus_master
*-network
description: Ethernet interface
product: 82547EI Gigabit Ethernet Controller
vendor: Intel Corporation
physical id: 1
bus info: pci@0000:02:01.0
logical name: eth0
version: 00
serial: 00:11:09:c3:84:a6
size: 100MB/s
capacity: 1GB/s
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k3-NAPI duplex=full firmware=N/A ip=192.168.178.100 latency=0 link=yes mingnt=255 module=e1000 multicast=yes port=twisted pair speed=100MB/s
*-system UNCLAIMED
description: System peripheral
product: 82875P/E7210 Processor to I/O Memory Interface
vendor: Intel Corporation
physical id: 6
bus info: pci@0000:00:06.0
version: 02
width: 32 bits
clock: 33MHz
configuration: latency=0
*-usb:0
description: USB Controller
product: 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=uhci_hcd latency=0 module=uhci_hcd
*-usb:1
description: USB Controller
product: 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2
vendor: Intel Corporation
physical id: 1d.1
bus info: pci@0000:00:1d.1
version: 02
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=uhci_hcd latency=0 module=uhci_hcd
*-usb:2
description: USB Controller
product: 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3
vendor: Intel Corporation
physical id: 1d.2
bus info: pci@0000:00:1d.2
version: 02
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=uhci_hcd latency=0 module=uhci_hcd
*-usb:3
description: USB Controller
product: 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4
vendor: Intel Corporation
physical id: 1d.3
bus info: pci@0000:00:1d.3
version: 02
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=uhci_hcd latency=0 module=uhci_hcd
*-usb:4
description: USB Controller
product: 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
vendor: Intel Corporation
physical id: 1d.7
bus info: pci@0000:00:1d.7
version: 02
width: 32 bits
clock: 33MHz
capabilities: pm debug bus_master cap_list
configuration: driver=ehci_hcd latency=0 module=ehci_hcd
*-pci:2
description: PCI bridge
product: 82801 PCI Bridge
vendor: Intel Corporation
physical id: 1e
bus info: pci@0000:00:1e.0
version: c2
width: 32 bits
clock: 33MHz
capabilities: pci bus_master
*-firewire
description: FireWire (IEEE 1394)
product: VT6306 Fire II IEEE 1394 OHCI Link Layer Controller
vendor: VIA Technologies, Inc.
physical id: 9
bus info: pci@0000:03:09.0
version: 46
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=ohci1394 latency=32 maxlatency=32 module=ohci1394
*-isa
description: ISA bridge
product: 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: isa bus_master
configuration: latency=0
*-ide:0
description: IDE interface
product: 82801EB/ER (ICH5/ICH5R) IDE Controller
vendor: Intel Corporation
physical id: 1f.1
bus info: pci@0000:00:1f.1
logical name: scsi0
logical name: scsi1
version: 02
width: 32 bits
clock: 33MHz
capabilities: ide bus_master emulated
configuration: driver=ata_piix latency=0
*-cdrom:0
description: DVD-RAM writer
product: DVD-RAM GSA-H55L
vendor: HL-DT-ST
physical id: 0
bus info: scsi@0:0.0.0
logical name: /dev/cdrom
logical name: /dev/cdrw
logical name: /dev/dvd
logical name: /dev/dvdrw
logical name: /dev/scd0
logical name: /dev/sr0
version: 1.03
serial: [HL-DT-STDVD-RAM GSA-H55L1.0307/08/17 7U02
capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 status=nodisc
*-cdrom:1
description: DVD writer
product: DVD_RW ND-2510A
vendor: _NEC
physical id: 1
bus info: scsi@1:0.0.0
logical name: /dev/cdrom1
logical name: /dev/cdrw1
logical name: /dev/dvd1
logical name: /dev/dvdrw1
logical name: /dev/scd1
logical name: /dev/sr1
version: 2.18
serial: [_NEC DVD_RW ND-2510A 2.1804110800
capabilities: removable audio cd-r cd-rw dvd dvd-r
configuration: ansiversion=5 status=nodisc
*-ide:1
description: IDE interface
product: 82801EB (ICH5) SATA Controller
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@0000:00:1f.2
logical name: scsi2
logical name: scsi3
version: 02
width: 32 bits
clock: 66MHz
capabilities: ide bus_master emulated
configuration: driver=ata_piix latency=0
*-disk:0
description: ATA Disk
product: ST3250410AS
vendor: Seagate
physical id: 0
bus info: scsi@2:0.0.0
logical name: /dev/sda
version: 4.AA
serial: 6RYEWT1N
size: 232GiB (250GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=17d9176a
*-volume:0
description: EXT3 volume
vendor: Linux
physical id: 1
bus info: scsi@2:0.0.0,1
logical name: /dev/sda1
logical name: /
version: 1.0
serial: 450f8910-7704-4c50-b1d1-075f676bd515
size: 219GiB
capacity: 219GiB
capabilities: primary bootable journaled extended_attributes large_files ext3 ext2 initialized
configuration: created=2009-06-28 15:39:54 filesystem=ext3 modified=2010-02-24 20:17:35 mount.fstype=ext3 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2010-02-24 17:43:34 state=mounted
*-volume:1
description: Extended partition
physical id: 2
bus info: scsi@2:0.0.0,2
logical name: /dev/sda2
size: 13GiB
capacity: 13GiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume
description: Linux swap / Solaris partition
physical id: 5
logical name: /dev/sda5
capacity: 13GiB
capabilities: nofs
*-disk:1
description: ATA Disk
product: Hitachi HDT72503
vendor: Hitachi
physical id: 1
bus info: scsi@3:0.0.0
logical name: /dev/sdb
version: V54O
serial: VFD200R2CW552L
size: 298GiB (320GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=f592f592
*-volume:0
description: Windows NTFS volume
physical id: 1
bus info: scsi@3:0.0.0,1
logical name: /dev/sdb1
logical name: /media/XP
version: 3.1
serial: 1416a566-97a0-e447-a4b7-0ef016671390
size: 97GiB
capacity: 97GiB
capabilities: primary bootable ntfs initialized
configuration: clustersize=4096 created=2007-01-29 19:04:45 filesystem=ntfs mount.fstype=fuseblk mount.options=rw,nosuid,nodev,user_id=0,group_id=0,allow_other,blksize=4096 state=mounted
*-volume:1
description: Windows NTFS volume
physical id: 2
bus info: scsi@3:0.0.0,2
logical name: /dev/sdb2
logical name: /media/XP2
version: 3.1
serial: bad99a19-82cf-6b4c-a466-b13df6251e1b
size: 200GiB
capacity: 200GiB
capabilities: primary ntfs initialized
configuration: clustersize=4096 created=2007-01-29 18:41:06 filesystem=ntfs label=Volume mount.fstype=fuseblk mount.options=rw,nosuid,nodev,user_id=0,group_id=0,allow_other,blksize=4096 state=mounted
*-serial UNCLAIMED
description: SMBus
product: 82801EB/ER (ICH5/ICH5R) SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@0000:00:1f.3
version: 02
width: 32 bits
clock: 33MHz
configuration: latency=0
*-multimedia
description: Multimedia audio controller
product: 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller
vendor: Intel Corporation
physical id: 1f.5
bus info: pci@0000:00:1f.5
version: 02
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=Intel ICH latency=0 module=snd_intel8x0
*-network:0 DISABLED
description: Ethernet interface
physical id: 1
logical name: vboxnet0
serial: 0a:00:27:00:00:00
capabilities: ethernet physical
configuration: broadcast=yes multicast=yes
*-network:1 DISABLED
description: Ethernet interface
physical id: 2
logical name: pan0
serial: 82:1a:39:97:1f:bf
capabilities: ethernet physical
configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes
meister@meister-desktop:~$
|
|
Benno-007
Anmeldungsdatum:
28. August 2007
Beiträge: 29240
Wohnort: Germany
|
Dadrin kommt der Begriff Plustek gar nicht vor - aber ich hatte dir eigentlich einen Filterbefehl dazu gegeben, damit man das Ergebnis sofort sieht und nicht nochmal alles posten und durchsuchen muß. Viel Glück weiterhin.
|
|
fredvomjupiter
(Themenstarter)
Anmeldungsdatum:
30. Januar 2009
Beiträge: 330
Wohnort: Saarland
|
Sorry habe ich übersehen, habe etwas den Überblick verloren im Moment.
Dabei kommt leider nichts raus meister@meister-desktop:~$ sudo lshw | grep -i plustek -A 10
meister@meister-desktop:~$ Danke dir trotzdem nochmals für deine große Mühe und Geduld mit mir 👍
Ich gehe morgen mal wieder alles von vorne durch, heute wird dat nix mehr, hatte einen schlechten Tag, da soll man sich Abends nicht über solche Kleinigkeiten aufregen ☺
|