ChaosZarth
Anmeldungsdatum: 7. Dezember 2007
Beiträge: 242
|
Hi Forum, ich habe Probleme beim Start von kmail: Der Akonadi-Dienst zur persönlichen Informationsverwaltung arbeitet nicht richtig.
Unter Details steht: Akonadi-Steuerprogramm nicht am D-Bus registriert.
Akonadi-Serverprogramm nicht am D-Bus registriert.
etc. gibt folgendes aus: 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20 | Unable to register service as "org.freedesktop.Akonadi.Control.lock" Maybe it's already running?
"[
0: /usr/bin/akonadi_control() [0x42a1c8]
1: /usr/bin/akonadi_control() [0x42a452]
2: /lib/x86_64-linux-gnu/libc.so.6(+0x36ff0) [0x7fe91fd35ff0]
3: /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x37) [0x7fe91fd35f77]
4: /lib/x86_64-linux-gnu/libc.so.6(abort+0x148) [0x7fe91fd395e8]
5: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x102) [0x7fe920d64912]
6: /usr/bin/akonadi_control() [0x42c3ad]
7: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0xb0) [0x7fe920dff020]
8: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(+0x1183ad) [0x7fe920e0c3ad]
9: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x33) [0x7fe920e14f93]
10: /usr/bin/akonadi_control() [0x40c3c0]
11: /usr/bin/akonadi_control() [0x40908b]
12: /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5) [0x7fe91fd20de5]
13: /usr/bin/akonadi_control() [0x40939f]
]
"
Error: akonadi_control was started but didn't register at D-Bus session bus.
Make sure your system is set up correctly!
|
Was kann ich machen um akonadi_control am D-Bus zu registrieren? ☺ Ich bin dankbar für jeden Tipp.
|
Tids
Anmeldungsdatum: 29. Oktober 2008
Beiträge: 3065
Wohnort: Naumburg (Saale)
|
alt+F2 → "akonadi" → Akonadi Einrichtung > Reiter - Einrichtung des Akonadi Servers > Test > Bericht in die Zwischenablage. Dann hier in einen Textblock legen ^^
|
ChaosZarth
(Themenstarter)
Anmeldungsdatum: 7. Dezember 2007
Beiträge: 242
|
Akonadi Server Self-Test Report
===============================
Test 1: SUCCESS
--------
Database driver found.
Details: The QtSQL driver 'QMYSQL' is required by your current Akonadi server configuration and was found on your system.
File content of '/home/karsten/.config/akonadi/akonadiserverrc':
[%General]
Driver=QMYSQL
[QMYSQL]
Name=akonadi
Host=
Options="UNIX_SOCKET=/tmp/akonadi-karsten.bx3rfZ/mysql.socket"
ServerPath=/usr/sbin/mysqld-akonadi
StartServer=true
[Debug]
Tracer=null
Test 2: SUCCESS
--------
Akonadi is not running as root
Details: Akonadi is not running as a root/administrator user, which is the recommended setup for a secure system.
Test 3: SUCCESS
--------
MySQL server found.
Details: You have currently configured Akonadi to use the MySQL server '/usr/sbin/mysqld-akonadi'.
Make sure you have the MySQL server installed, set the correct path and ensure you have the necessary read and execution rights on the server executable. The server executable is typically called 'mysqld'; its location varies depending on the distribution.
Test 4: SUCCESS
--------
MySQL server is executable.
Details: MySQL server found: 131025 23:35:59 [Warning] Using unique option prefix key_buffer instead of key_buffer_size is deprecated and will be removed in a future release. Please use the full name instead.
/usr/sbin/mysqld Ver 5.5.34-0ubuntu0.13.10.1 for debian-linux-gnu on x86_64 ((Ubuntu))
Test 5: SUCCESS
--------
MySQL server log contains no errors.
Details: The MySQL server log file '<a href='/home/karsten/.local/share/akonadi/db_data/mysql.err'>/home/karsten/.local/share/akonadi/db_data/mysql.err</a>' does not contain any errors or warnings.
File content of '/home/karsten/.local/share/akonadi/db_data/mysql.err':
131025 20:25:35 [Note] Plugin 'FEDERATED' is disabled.
131025 20:25:35 InnoDB: The InnoDB memory heap is disabled
131025 20:25:35 InnoDB: Mutexes and rw_locks use GCC atomic builtins
131025 20:25:35 InnoDB: Compressed tables use zlib 1.2.8
131025 20:25:35 InnoDB: Using Linux native AIO
131025 20:25:35 InnoDB: Initializing buffer pool, size = 80.0M
131025 20:25:35 InnoDB: Completed initialization of buffer pool
131025 20:25:35 InnoDB: highest supported file format is Barracuda.
131025 20:25:38 InnoDB: Waiting for the background threads to start
131025 20:25:39 InnoDB: 5.5.34 started; log sequence number 446744115
131025 20:25:40 [Note] /usr/sbin/mysqld: ready for connections.
Version: '5.5.34-0ubuntu0.13.10.1' socket: '/tmp/akonadi-karsten.bx3rfZ/mysql.socket' port: 0 (Ubuntu)
Test 6: SUCCESS
--------
MySQL server default configuration found.
Details: The default configuration for the MySQL server was found and is readable at <a href='/etc/akonadi/mysql-global.conf'>/etc/akonadi/mysql-global.conf</a>.
File content of '/etc/akonadi/mysql-global.conf':
#
# Global Akonadi MySQL server settings,
# These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf
#
# Based on advice by Kris Köhntopp <kris@mysql.com>
#
[mysqld]
# strict query parsing/interpretation
# TODO: make Akonadi work with those settings enabled
# sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat
# sql_mode=strict_trans_tables
# DEBUGGING:
# log all queries, useful for debugging but generates an enormous amount of data
# log=mysql.full
# log queries slower than n seconds, log file name relative to datadir (for debugging only)
# log_slow_queries=mysql.slow
# long_query_time=1
# log queries not using indices, debug only, disable for production use
# log_queries_not_using_indexes=1
#
# mesure database size and adjust innodb_buffer_pool_size
# SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema");
# NOTES:
# Keep Innob_log_waits and keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables)
#expire_logs_days=3
#sync_bin_log=0
# Use UTF-8 encoding for tables
character_set_server=utf8
collation_server=utf8_general_ci
# use InnoDB for transactions and better crash recovery
default_storage_engine=innodb
# memory pool InnoDB uses to store data dictionary information and other internal data structures (default:1M)
# Deprecated in MySQL >= 5.6.3
innodb_additional_mem_pool_size=1M
# memory buffer InnoDB uses to cache data and indexes of its tables (default:128M)
# Larger values means less I/O
innodb_buffer_pool_size=80M
# Create a .ibd file for each table (default:0)
innodb_file_per_table=1
# Write out the log buffer to the log file at each commit (default:1)
innodb_flush_log_at_trx_commit=2
# Buffer size used to write to the log files on disk (default:1M for builtin, 8M for plugin)
# larger values means less I/O
innodb_log_buffer_size=1M
# Size of each log file in a log group (default:5M) larger means less I/O but more time for recovery.
innodb_log_file_size=64M
# # error log file name, relative to datadir (default:hostname.err)
log_error=mysql.err
# print warnings and connection errors (default:1)
log_warnings=2
# Convert table named to lowercase
lower_case_table_names=1
# Maximum size of one packet or any generated/intermediate string. (default:1M)
max_allowed_packet=32M
# Maximum simultaneous connections allowed (default:100)
max_connections=256
# The two options below make no sense with prepared statements and/or transactions
# (make sense when having the same query multiple times)
# Memory allocated for caching query results (default:0 (disabled))
query_cache_size=0
# Do not cache results (default:1)
query_cache_type=0
# Do not use the privileges mechanisms
skip_grant_tables
# Do not listen for TCP/IP connections at all
skip_networking
# The number of open tables for all threads. (default:64)
table_open_cache=200
# How many threads the server should cache for reuse (default:0)
thread_cache_size=3
# wait 365d before dropping the DB connection (default:8h)
wait_timeout=31536000
[client]
default-character-set=utf8
Test 7: SKIP
--------
MySQL server custom configuration not available.
Details: The custom configuration for the MySQL server was not found but is optional.
Test 8: SUCCESS
--------
MySQL server configuration is usable.
Details: The MySQL server configuration was found at <a href='/home/karsten/.local/share/akonadi/mysql.conf'>/home/karsten/.local/share/akonadi/mysql.conf</a> and is readable.
File content of '/home/karsten/.local/share/akonadi/mysql.conf':
#
# Global Akonadi MySQL server settings,
# These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf
#
# Based on advice by Kris Köhntopp <kris@mysql.com>
#
[mysqld]
# strict query parsing/interpretation
# TODO: make Akonadi work with those settings enabled
# sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat
# sql_mode=strict_trans_tables
# DEBUGGING:
# log all queries, useful for debugging but generates an enormous amount of data
# log=mysql.full
# log queries slower than n seconds, log file name relative to datadir (for debugging only)
# log_slow_queries=mysql.slow
# long_query_time=1
# log queries not using indices, debug only, disable for production use
# log_queries_not_using_indexes=1
#
# mesure database size and adjust innodb_buffer_pool_size
# SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema");
# NOTES:
# Keep Innob_log_waits and keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables)
#expire_logs_days=3
#sync_bin_log=0
# Use UTF-8 encoding for tables
character_set_server=utf8
collation_server=utf8_general_ci
# use InnoDB for transactions and better crash recovery
default_storage_engine=innodb
# memory pool InnoDB uses to store data dictionary information and other internal data structures (default:1M)
# Deprecated in MySQL >= 5.6.3
innodb_additional_mem_pool_size=1M
# memory buffer InnoDB uses to cache data and indexes of its tables (default:128M)
# Larger values means less I/O
innodb_buffer_pool_size=80M
# Create a .ibd file for each table (default:0)
innodb_file_per_table=1
# Write out the log buffer to the log file at each commit (default:1)
innodb_flush_log_at_trx_commit=2
# Buffer size used to write to the log files on disk (default:1M for builtin, 8M for plugin)
# larger values means less I/O
innodb_log_buffer_size=1M
# Size of each log file in a log group (default:5M) larger means less I/O but more time for recovery.
innodb_log_file_size=64M
# # error log file name, relative to datadir (default:hostname.err)
log_error=mysql.err
# print warnings and connection errors (default:1)
log_warnings=2
# Convert table named to lowercase
lower_case_table_names=1
# Maximum size of one packet or any generated/intermediate string. (default:1M)
max_allowed_packet=32M
# Maximum simultaneous connections allowed (default:100)
max_connections=256
# The two options below make no sense with prepared statements and/or transactions
# (make sense when having the same query multiple times)
# Memory allocated for caching query results (default:0 (disabled))
query_cache_size=0
# Do not cache results (default:1)
query_cache_type=0
# Do not use the privileges mechanisms
skip_grant_tables
# Do not listen for TCP/IP connections at all
skip_networking
# The number of open tables for all threads. (default:64)
table_open_cache=200
# How many threads the server should cache for reuse (default:0)
thread_cache_size=3
# wait 365d before dropping the DB connection (default:8h)
wait_timeout=31536000
[client]
default-character-set=utf8
Test 9: SUCCESS
--------
akonadictl found and usable
Details: The program '/usr/bin/akonadictl' to control the Akonadi server was found and could be executed successfully.
Result:
Akonadi 1.10.3
Test 10: ERROR
--------
Akonadi control process not registered at D-Bus.
Details: The Akonadi control process is not registered at D-Bus which typically means it was not started or encountered a fatal error during startup.
Test 11: ERROR
--------
Akonadi server process not registered at D-Bus.
Details: The Akonadi server process is not registered at D-Bus which typically means it was not started or encountered a fatal error during startup.
Test 12: SUCCESS
--------
Nepomuk search service registered at D-Bus.
Details: The Nepomuk search service is registered at D-Bus which typically indicates it is operational.
Test 13: SUCCESS
--------
Nepomuk search service uses an appropriate backend.
Details: The Nepomuk search service uses one of the recommended backends.
Test 14: SKIP
--------
Protocol version check not possible.
Details: Without a connection to the server it is not possible to check if the protocol version meets the requirements.
Test 15: ERROR
--------
No resource agents found.
Details: No resource agents have been found, Akonadi is not usable without at least one. This usually means that no resource agents are installed or that there is a setup problem. The following paths have been searched: '/usr/share/akonadi/agents'. The XDG_DATA_DIRS environment variable is set to '/usr/share:/usr/share/kde-plasma:/usr/local/share/:/usr/share/'; make sure this includes all paths where Akonadi agents are installed.
Directory listing of '/usr/share/akonadi/agents':
akonadinepomukfeederagent.desktop
akonotesresource.desktop
archivemailagent.desktop
birthdaysresource.desktop
contactsresource.desktop
davgroupwareresource.desktop
facebookresource.desktop
googlecalendarresource.desktop
googlecontactsresource.desktop
icaldirresource.desktop
icalresource.desktop
imapresource.desktop
invitationsagent.desktop
kabcresource.desktop
kalarmdirresource.desktop
kalarmresource.desktop
kcalresource.desktop
kdeaccountsresource.desktop
knutresource.desktop
kolabproxyresource.desktop
localbookmarksresource.desktop
maildirresource.desktop
maildispatcheragent.desktop
mailfilteragent.desktop
mboxresource.desktop
microblog.desktop
mixedmaildirresource.desktop
mtdummyresource.desktop
nepomuktagresource.desktop
newmailnotifieragent.desktop
nntpresource.desktop
notesresource.desktop
openxchangeresource.desktop
pop3resource.desktop
sendlateragent.desktop
vcarddirresource.desktop
vcardresource.desktop
Environment variable XDG_DATA_DIRS is set to '/usr/share:/usr/share/kde-plasma:/usr/local/share/:/usr/share/'
Test 16: SUCCESS
--------
No current Akonadi server error log found.
Details: The Akonadi server did not report any errors during its current startup.
Test 17: SUCCESS
--------
No previous Akonadi server error log found.
Details: The Akonadi server did not report any errors during its previous startup.
Test 18: ERROR
--------
Current Akonadi control error log found.
Details: The Akonadi control process reported errors during its current startup. The log can be found in <a href='/home/karsten/.local/share/akonadi/akonadi_control.error'>/home/karsten/.local/share/akonadi/akonadi_control.error</a>.
File content of '/home/karsten/.local/share/akonadi/akonadi_control.error':
Unable to register service as "org.freedesktop.Akonadi.Control.lock" Maybe it's already running?
"[
0: /usr/bin/akonadi_control() [0x42a1c8]
1: /usr/bin/akonadi_control() [0x42a452]
2: /lib/x86_64-linux-gnu/libc.so.6(+0x36ff0) [0x7fe91fd35ff0]
3: /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x37) [0x7fe91fd35f77]
4: /lib/x86_64-linux-gnu/libc.so.6(abort+0x148) [0x7fe91fd395e8]
5: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x102) [0x7fe920d64912]
6: /usr/bin/akonadi_control() [0x42c3ad]
7: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0xb0) [0x7fe920dff020]
8: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(+0x1183ad) [0x7fe920e0c3ad]
9: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x33) [0x7fe920e14f93]
10: /usr/bin/akonadi_control() [0x40c3c0]
11: /usr/bin/akonadi_control() [0x40908b]
12: /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5) [0x7fe91fd20de5]
13: /usr/bin/akonadi_control() [0x40939f]
]
"
Test 19: SUCCESS
--------
No previous Akonadi control error log found.
Details: The Akonadi control process did not report any errors during its previous startup.
|
Norsfyr
Anmeldungsdatum: 11. Februar 2013
Beiträge: 40
Wohnort: Ammersbek
|
Und ich habe mich schon gefragt, ob ich der einzige bin mit dem Problem seit 13.10.. das merkwürdige ist, manchmal läuft es problemlos. Dann wieder gar nicht, egal ob Neustart oder nicht. Ein System hinter dem Fehler habe ich noch nicht ausmachen können. Akonadi Server Self-Test Report
===============================
Test 1: SUCCESS
--------
Database driver found.
Details: The QtSQL driver 'QMYSQL' is required by your current Akonadi server configuration and was found on your system.
File content of '/home/norsfyr/.config/akonadi/akonadiserverrc':
[%General]
Driver=QMYSQL
[QMYSQL]
Name=akonadi
Host=
Options="UNIX_SOCKET=/tmp/akonadi-norsfyr.pgL6DE/mysql.socket"
ServerPath=/usr/sbin/mysqld-akonadi
StartServer=true
[Debug]
Tracer=null
Test 2: SUCCESS
--------
Akonadi is not running as root
Details: Akonadi is not running as a root/administrator user, which is the recommended setup for a secure system.
Test 3: SUCCESS
--------
MySQL server found.
Details: You have currently configured Akonadi to use the MySQL server '/usr/sbin/mysqld-akonadi'.
Make sure you have the MySQL server installed, set the correct path and ensure you have the necessary read and execution rights on the server executable. The server executable is typically called 'mysqld'; its location varies depending on the distribution.
Test 4: SUCCESS
--------
MySQL server is executable.
Details: MySQL server found: 131026 2:17:40 [Warning] Using unique option prefix key_buffer instead of key_buffer_size is deprecated and will be removed in a future release. Please use the full name instead.
/usr/sbin/mysqld Ver 5.5.34-0ubuntu0.13.10.1 for debian-linux-gnu on x86_64 ((Ubuntu))
Test 5: SUCCESS
--------
MySQL server log contains no errors.
Details: The MySQL server log file '<a href='/home/norsfyr/.local/share/akonadi/db_data/mysql.err'>/home/norsfyr/.local/share/akonadi/db_data/mysql.err</a>' does not contain any errors or warnings.
File content of '/home/norsfyr/.local/share/akonadi/db_data/mysql.err':
131026 2:06:58 [Note] Plugin 'FEDERATED' is disabled.
131026 2:06:58 InnoDB: The InnoDB memory heap is disabled
131026 2:06:58 InnoDB: Mutexes and rw_locks use GCC atomic builtins
131026 2:06:58 InnoDB: Compressed tables use zlib 1.2.8
131026 2:06:58 InnoDB: Using Linux native AIO
131026 2:06:58 InnoDB: Initializing buffer pool, size = 80.0M
131026 2:06:58 InnoDB: Completed initialization of buffer pool
131026 2:06:58 InnoDB: highest supported file format is Barracuda.
131026 2:07:00 InnoDB: Waiting for the background threads to start
131026 2:07:01 InnoDB: 5.5.34 started; log sequence number 221219515
131026 2:07:02 [Note] /usr/sbin/mysqld: ready for connections.
Version: '5.5.34-0ubuntu0.13.10.1' socket: '/tmp/akonadi-norsfyr.pgL6DE/mysql.socket' port: 0 (Ubuntu)
Test 6: SUCCESS
--------
MySQL server default configuration found.
Details: The default configuration for the MySQL server was found and is readable at <a href='/etc/akonadi/mysql-global.conf'>/etc/akonadi/mysql-global.conf</a>.
File content of '/etc/akonadi/mysql-global.conf':
#
# Global Akonadi MySQL server settings,
# These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf
#
# Based on advice by Kris Köhntopp <kris@mysql.com>
#
[mysqld]
# strict query parsing/interpretation
# TODO: make Akonadi work with those settings enabled
# sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat
# sql_mode=strict_trans_tables
# DEBUGGING:
# log all queries, useful for debugging but generates an enormous amount of data
# log=mysql.full
# log queries slower than n seconds, log file name relative to datadir (for debugging only)
# log_slow_queries=mysql.slow
# long_query_time=1
# log queries not using indices, debug only, disable for production use
# log_queries_not_using_indexes=1
#
# mesure database size and adjust innodb_buffer_pool_size
# SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema");
# NOTES:
# Keep Innob_log_waits and keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables)
#expire_logs_days=3
#sync_bin_log=0
# Use UTF-8 encoding for tables
character_set_server=utf8
collation_server=utf8_general_ci
# use InnoDB for transactions and better crash recovery
default_storage_engine=innodb
# memory pool InnoDB uses to store data dictionary information and other internal data structures (default:1M)
# Deprecated in MySQL >= 5.6.3
innodb_additional_mem_pool_size=1M
# memory buffer InnoDB uses to cache data and indexes of its tables (default:128M)
# Larger values means less I/O
innodb_buffer_pool_size=80M
# Create a .ibd file for each table (default:0)
innodb_file_per_table=1
# Write out the log buffer to the log file at each commit (default:1)
innodb_flush_log_at_trx_commit=2
# Buffer size used to write to the log files on disk (default:1M for builtin, 8M for plugin)
# larger values means less I/O
innodb_log_buffer_size=1M
# Size of each log file in a log group (default:5M) larger means less I/O but more time for recovery.
innodb_log_file_size=64M
# # error log file name, relative to datadir (default:hostname.err)
log_error=mysql.err
# print warnings and connection errors (default:1)
log_warnings=2
# Convert table named to lowercase
lower_case_table_names=1
# Maximum size of one packet or any generated/intermediate string. (default:1M)
max_allowed_packet=32M
# Maximum simultaneous connections allowed (default:100)
max_connections=256
# The two options below make no sense with prepared statements and/or transactions
# (make sense when having the same query multiple times)
# Memory allocated for caching query results (default:0 (disabled))
query_cache_size=0
# Do not cache results (default:1)
query_cache_type=0
# Do not use the privileges mechanisms
skip_grant_tables
# Do not listen for TCP/IP connections at all
skip_networking
# The number of open tables for all threads. (default:64)
table_open_cache=200
# How many threads the server should cache for reuse (default:0)
thread_cache_size=3
# wait 365d before dropping the DB connection (default:8h)
wait_timeout=31536000
[client]
default-character-set=utf8
Test 7: SKIP
--------
MySQL server custom configuration not available.
Details: The custom configuration for the MySQL server was not found but is optional.
Test 8: SUCCESS
--------
MySQL server configuration is usable.
Details: The MySQL server configuration was found at <a href='/home/norsfyr/.local/share/akonadi/mysql.conf'>/home/norsfyr/.local/share/akonadi/mysql.conf</a> and is readable.
File content of '/home/norsfyr/.local/share/akonadi/mysql.conf':
#
# Global Akonadi MySQL server settings,
# These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf
#
# Based on advice by Kris Köhntopp <kris@mysql.com>
#
[mysqld]
# strict query parsing/interpretation
# TODO: make Akonadi work with those settings enabled
# sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat
# sql_mode=strict_trans_tables
# DEBUGGING:
# log all queries, useful for debugging but generates an enormous amount of data
# log=mysql.full
# log queries slower than n seconds, log file name relative to datadir (for debugging only)
# log_slow_queries=mysql.slow
# long_query_time=1
# log queries not using indices, debug only, disable for production use
# log_queries_not_using_indexes=1
#
# mesure database size and adjust innodb_buffer_pool_size
# SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema");
# NOTES:
# Keep Innob_log_waits and keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables)
#expire_logs_days=3
#sync_bin_log=0
# Use UTF-8 encoding for tables
character_set_server=utf8
collation_server=utf8_general_ci
# use InnoDB for transactions and better crash recovery
default_storage_engine=innodb
# memory pool InnoDB uses to store data dictionary information and other internal data structures (default:1M)
# Deprecated in MySQL >= 5.6.3
innodb_additional_mem_pool_size=1M
# memory buffer InnoDB uses to cache data and indexes of its tables (default:128M)
# Larger values means less I/O
innodb_buffer_pool_size=80M
# Create a .ibd file for each table (default:0)
innodb_file_per_table=1
# Write out the log buffer to the log file at each commit (default:1)
innodb_flush_log_at_trx_commit=2
# Buffer size used to write to the log files on disk (default:1M for builtin, 8M for plugin)
# larger values means less I/O
innodb_log_buffer_size=1M
# Size of each log file in a log group (default:5M) larger means less I/O but more time for recovery.
innodb_log_file_size=64M
# # error log file name, relative to datadir (default:hostname.err)
log_error=mysql.err
# print warnings and connection errors (default:1)
log_warnings=2
# Convert table named to lowercase
lower_case_table_names=1
# Maximum size of one packet or any generated/intermediate string. (default:1M)
max_allowed_packet=32M
# Maximum simultaneous connections allowed (default:100)
max_connections=256
# The two options below make no sense with prepared statements and/or transactions
# (make sense when having the same query multiple times)
# Memory allocated for caching query results (default:0 (disabled))
query_cache_size=0
# Do not cache results (default:1)
query_cache_type=0
# Do not use the privileges mechanisms
skip_grant_tables
# Do not listen for TCP/IP connections at all
skip_networking
# The number of open tables for all threads. (default:64)
table_open_cache=200
# How many threads the server should cache for reuse (default:0)
thread_cache_size=3
# wait 365d before dropping the DB connection (default:8h)
wait_timeout=31536000
[client]
default-character-set=utf8
Test 9: SUCCESS
--------
akonadictl found and usable
Details: The program '/usr/bin/akonadictl' to control the Akonadi server was found and could be executed successfully.
Result:
Akonadi 1.10.3
Test 10: ERROR
--------
Akonadi control process not registered at D-Bus.
Details: The Akonadi control process is not registered at D-Bus which typically means it was not started or encountered a fatal error during startup.
Test 11: ERROR
--------
Akonadi server process not registered at D-Bus.
Details: The Akonadi server process is not registered at D-Bus which typically means it was not started or encountered a fatal error during startup.
Test 12: SUCCESS
--------
Nepomuk search service registered at D-Bus.
Details: The Nepomuk search service is registered at D-Bus which typically indicates it is operational.
Test 13: SUCCESS
--------
Nepomuk search service uses an appropriate backend.
Details: The Nepomuk search service uses one of the recommended backends.
Test 14: SKIP
--------
Protocol version check not possible.
Details: Without a connection to the server it is not possible to check if the protocol version meets the requirements.
Test 15: ERROR
--------
No resource agents found.
Details: No resource agents have been found, Akonadi is not usable without at least one. This usually means that no resource agents are installed or that there is a setup problem. The following paths have been searched: '/usr/share/akonadi/agents'. The XDG_DATA_DIRS environment variable is set to '/usr/share:/usr/share/kde-plasma:/usr/local/share/:/usr/share/'; make sure this includes all paths where Akonadi agents are installed.
Directory listing of '/usr/share/akonadi/agents':
akonadinepomukfeederagent.desktop
akonotesresource.desktop
archivemailagent.desktop
birthdaysresource.desktop
contactsresource.desktop
davgroupwareresource.desktop
facebookresource.desktop
googlecalendarresource.desktop
googlecontactsresource.desktop
icaldirresource.desktop
icalresource.desktop
imapresource.desktop
invitationsagent.desktop
kabcresource.desktop
kalarmdirresource.desktop
kalarmresource.desktop
kcalresource.desktop
kdeaccountsresource.desktop
knutresource.desktop
kolabproxyresource.desktop
localbookmarksresource.desktop
maildirresource.desktop
maildispatcheragent.desktop
mailfilteragent.desktop
mboxresource.desktop
microblog.desktop
mixedmaildirresource.desktop
mtdummyresource.desktop
nepomuktagresource.desktop
newmailnotifieragent.desktop
nntpresource.desktop
notesresource.desktop
openxchangeresource.desktop
pop3resource.desktop
sendlateragent.desktop
vcarddirresource.desktop
vcardresource.desktop
Environment variable XDG_DATA_DIRS is set to '/usr/share:/usr/share/kde-plasma:/usr/local/share/:/usr/share/'
Test 16: SUCCESS
--------
No current Akonadi server error log found.
Details: The Akonadi server did not report any errors during its current startup.
Test 17: ERROR
--------
Previous Akonadi server error log found.
Details: The Akonadi server reported errors during its previous startup. The log can be found in <a href='/home/norsfyr/.local/share/akonadi/akonadiserver.error.old'>/home/norsfyr/.local/share/akonadi/akonadiserver.error.old</a>.
File content of '/home/norsfyr/.local/share/akonadi/akonadiserver.error.old':
Control process died, committing suicide!
Test 18: SUCCESS
--------
No current Akonadi control error log found.
Details: The Akonadi control process did not report any errors during its current startup.
Test 19: SUCCESS
--------
No previous Akonadi control error log found.
Details: The Akonadi control process did not report any errors during its previous startup.
|
Tids
Anmeldungsdatum: 29. Oktober 2008
Beiträge: 3065
Wohnort: Naumburg (Saale)
|
Puh ich weiß bisher echt nicht. Dachte es war wegen dem mysql update heute/gestern. Das hat bei mir auch einiges an Ärger gemacht.
sudo apt-get update
sudo apt-get install -f
sudo apt-get dist-upgrade
sudo apt-get install kubuntu-desktop akonadi-server --reinstall
Ich glaube aber nicht das es daran liegt. :/
|
Norsfyr
Anmeldungsdatum: 11. Februar 2013
Beiträge: 40
Wohnort: Ammersbek
|
Ich meine ich hatte das schon probiert, kämpfe mit dem Problem nun schon ein paar Tage. Aber ich teste es noch mal. ☺ edit: Nun geht es erstmal wieder, ob das jetzt daran lag, an dem durch geführten Neustart oder an etwas ganz anderem.. warten wir es ab. 😉
|
marwell
Anmeldungsdatum: 18. Januar 2007
Beiträge: 165
Wohnort: Beijing
|
Das selbe Problem auch bei mir. Manchmal lauft Akonadi, meistens nicht. Und es laesst sich dann auch nicht starten, sprich kein Mail, Kontakte usw. Hier der Testbericht per Akonadi-Einrichtung: Akonadi Server Self-Test Report
===============================
Test 1: SUCCESS
--------
Database driver found.
Details: The QtSQL driver 'QMYSQL' is required by your current Akonadi server configuration and was found on your system.
File content of '~/.config/akonadi/akonadiserverrc':
[%General]
Driver=QMYSQL
[QMYSQL]
Name=akonadi
Host=
Options="UNIX_SOCKET=/tmp/akonadi-[username].eAdv0n/mysql.socket"
ServerPath=/usr/sbin/mysqld-akonadi
StartServer=true
[Debug]
Tracer=null
Test 2: SUCCESS
--------
Akonadi is not running as root
Details: Akonadi is not running as a root/administrator user, which is the recommended setup for a secure system.
Test 3: SUCCESS
--------
MySQL server found.
Details: You have currently configured Akonadi to use the MySQL server '/usr/sbin/mysqld-akonadi'.
Make sure you have the MySQL server installed, set the correct path and ensure you have the necessary read and execution rights on the server executable. The server executable is typically called 'mysqld'; its location varies depending on the distribution.
Test 4: SUCCESS
--------
MySQL server is executable.
Details: MySQL server found: 131026 12:56:53 [Warning] Using unique option prefix key_buffer instead of key_buffer_size is deprecated and will be removed in a future release. Please use the full name instead.
/usr/sbin/mysqld Ver 5.5.34-0ubuntu0.13.10.1 for debian-linux-gnu on x86_64 ((Ubuntu))
Test 5: SUCCESS
--------
MySQL server log contains no errors.
Details: The MySQL server log file '<a href='~/.local/share/akonadi/db_data/mysql.err'>~/.local/share/akonadi/db_data/mysql.err</a>' does not contain any errors or warnings.
File content of '~/.local/share/akonadi/db_data/mysql.err':
131026 12:10:21 [Note] Plugin 'FEDERATED' is disabled.
131026 12:10:21 InnoDB: The InnoDB memory heap is disabled
131026 12:10:21 InnoDB: Mutexes and rw_locks use GCC atomic builtins
131026 12:10:21 InnoDB: Compressed tables use zlib 1.2.8
131026 12:10:21 InnoDB: Using Linux native AIO
131026 12:10:21 InnoDB: Initializing buffer pool, size = 80.0M
131026 12:10:21 InnoDB: Completed initialization of buffer pool
131026 12:10:21 InnoDB: highest supported file format is Barracuda.
131026 12:10:24 InnoDB: Waiting for the background threads to start
131026 12:10:25 InnoDB: 5.5.34 started; log sequence number 6074294800
131026 12:10:27 [Note] /usr/sbin/mysqld: ready for connections.
Version: '5.5.34-0ubuntu0.13.10.1' socket: '/tmp/akonadi-[username].eAdv0n/mysql.socket' port: 0 (Ubuntu)
Test 6: SUCCESS
--------
MySQL server default configuration found.
Details: The default configuration for the MySQL server was found and is readable at <a href='/etc/akonadi/mysql-global.conf'>/etc/akonadi/mysql-global.conf</a>.
File content of '/etc/akonadi/mysql-global.conf':
#
# Global Akonadi MySQL server settings,
# These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf
#
# Based on advice by Kris Köhntopp <kris@mysql.com>
#
[mysqld]
# strict query parsing/interpretation
# TODO: make Akonadi work with those settings enabled
# sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat
# sql_mode=strict_trans_tables
# DEBUGGING:
# log all queries, useful for debugging but generates an enormous amount of data
# log=mysql.full
# log queries slower than n seconds, log file name relative to datadir (for debugging only)
# log_slow_queries=mysql.slow
# long_query_time=1
# log queries not using indices, debug only, disable for production use
# log_queries_not_using_indexes=1
#
# mesure database size and adjust innodb_buffer_pool_size
# SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema");
# NOTES:
# Keep Innob_log_waits and keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables)
#expire_logs_days=3
#sync_bin_log=0
# Use UTF-8 encoding for tables
character_set_server=utf8
collation_server=utf8_general_ci
# use InnoDB for transactions and better crash recovery
default_storage_engine=innodb
# memory pool InnoDB uses to store data dictionary information and other internal data structures (default:1M)
# Deprecated in MySQL >= 5.6.3
innodb_additional_mem_pool_size=1M
# memory buffer InnoDB uses to cache data and indexes of its tables (default:128M)
# Larger values means less I/O
innodb_buffer_pool_size=80M
# Create a .ibd file for each table (default:0)
innodb_file_per_table=1
# Write out the log buffer to the log file at each commit (default:1)
innodb_flush_log_at_trx_commit=2
# Buffer size used to write to the log files on disk (default:1M for builtin, 8M for plugin)
# larger values means less I/O
innodb_log_buffer_size=1M
# Size of each log file in a log group (default:5M) larger means less I/O but more time for recovery.
innodb_log_file_size=64M
# # error log file name, relative to datadir (default:hostname.err)
log_error=mysql.err
# print warnings and connection errors (default:1)
log_warnings=2
# Convert table named to lowercase
lower_case_table_names=1
# Maximum size of one packet or any generated/intermediate string. (default:1M)
max_allowed_packet=32M
# Maximum simultaneous connections allowed (default:100)
max_connections=256
# The two options below make no sense with prepared statements and/or transactions
# (make sense when having the same query multiple times)
# Memory allocated for caching query results (default:0 (disabled))
query_cache_size=0
# Do not cache results (default:1)
query_cache_type=0
# Do not use the privileges mechanisms
skip_grant_tables
# Do not listen for TCP/IP connections at all
skip_networking
# The number of open tables for all threads. (default:64)
table_open_cache=200
# How many threads the server should cache for reuse (default:0)
thread_cache_size=3
# wait 365d before dropping the DB connection (default:8h)
wait_timeout=31536000
[client]
default-character-set=utf8
Test 7: SKIP
--------
MySQL server custom configuration not available.
Details: The custom configuration for the MySQL server was not found but is optional.
Test 8: SUCCESS
--------
MySQL server configuration is usable.
Details: The MySQL server configuration was found at <a href='~/.local/share/akonadi/mysql.conf'>~/.local/share/akonadi/mysql.conf</a> and is readable.
File content of '~/.local/share/akonadi/mysql.conf':
#
# Global Akonadi MySQL server settings,
# These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf
#
# Based on advice by Kris Köhntopp <kris@mysql.com>
#
[mysqld]
# strict query parsing/interpretation
# TODO: make Akonadi work with those settings enabled
# sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat
# sql_mode=strict_trans_tables
# DEBUGGING:
# log all queries, useful for debugging but generates an enormous amount of data
# log=mysql.full
# log queries slower than n seconds, log file name relative to datadir (for debugging only)
# log_slow_queries=mysql.slow
# long_query_time=1
# log queries not using indices, debug only, disable for production use
# log_queries_not_using_indexes=1
#
# mesure database size and adjust innodb_buffer_pool_size
# SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema");
# NOTES:
# Keep Innob_log_waits and keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables)
#expire_logs_days=3
#sync_bin_log=0
# Use UTF-8 encoding for tables
character_set_server=utf8
collation_server=utf8_general_ci
# use InnoDB for transactions and better crash recovery
default_storage_engine=innodb
# memory pool InnoDB uses to store data dictionary information and other internal data structures (default:1M)
# Deprecated in MySQL >= 5.6.3
innodb_additional_mem_pool_size=1M
# memory buffer InnoDB uses to cache data and indexes of its tables (default:128M)
# Larger values means less I/O
innodb_buffer_pool_size=80M
# Create a .ibd file for each table (default:0)
innodb_file_per_table=1
# Write out the log buffer to the log file at each commit (default:1)
innodb_flush_log_at_trx_commit=2
# Buffer size used to write to the log files on disk (default:1M for builtin, 8M for plugin)
# larger values means less I/O
innodb_log_buffer_size=1M
# Size of each log file in a log group (default:5M) larger means less I/O but more time for recovery.
innodb_log_file_size=64M
# # error log file name, relative to datadir (default:hostname.err)
log_error=mysql.err
# print warnings and connection errors (default:1)
log_warnings=2
# Convert table named to lowercase
lower_case_table_names=1
# Maximum size of one packet or any generated/intermediate string. (default:1M)
max_allowed_packet=32M
# Maximum simultaneous connections allowed (default:100)
max_connections=256
# The two options below make no sense with prepared statements and/or transactions
# (make sense when having the same query multiple times)
# Memory allocated for caching query results (default:0 (disabled))
query_cache_size=0
# Do not cache results (default:1)
query_cache_type=0
# Do not use the privileges mechanisms
skip_grant_tables
# Do not listen for TCP/IP connections at all
skip_networking
# The number of open tables for all threads. (default:64)
table_open_cache=200
# How many threads the server should cache for reuse (default:0)
thread_cache_size=3
# wait 365d before dropping the DB connection (default:8h)
wait_timeout=31536000
[client]
default-character-set=utf8
Test 9: SUCCESS
--------
akonadictl found and usable
Details: The program '/usr/bin/akonadictl' to control the Akonadi server was found and could be executed successfully.
Result:
Akonadi 1.10.3
Test 10: ERROR
--------
Akonadi control process not registered at D-Bus.
Details: The Akonadi control process is not registered at D-Bus which typically means it was not started or encountered a fatal error during startup.
Test 11: ERROR
--------
Akonadi server process not registered at D-Bus.
Details: The Akonadi server process is not registered at D-Bus which typically means it was not started or encountered a fatal error during startup.
Test 12: SUCCESS
--------
Nepomuk search service registered at D-Bus.
Details: The Nepomuk search service is registered at D-Bus which typically indicates it is operational.
Test 13: SUCCESS
--------
Nepomuk search service uses an appropriate backend.
Details: The Nepomuk search service uses one of the recommended backends.
Test 14: SKIP
--------
Protocol version check not possible.
Details: Without a connection to the server it is not possible to check if the protocol version meets the requirements.
Test 15: ERROR
--------
No resource agents found.
Details: No resource agents have been found, Akonadi is not usable without at least one. This usually means that no resource agents are installed or that there is a setup problem. The following paths have been searched: '/usr/share/akonadi/agents'. The XDG_DATA_DIRS environment variable is set to '/usr/share:/usr/share/kde-plasma:/usr/local/share/:/usr/share/'; make sure this includes all paths where Akonadi agents are installed.
Directory listing of '/usr/share/akonadi/agents':
akonadinepomukfeederagent.desktop
akonotesresource.desktop
archivemailagent.desktop
birthdaysresource.desktop
contactsresource.desktop
davgroupwareresource.desktop
facebookresource.desktop
googlecalendarresource.desktop
googlecontactsresource.desktop
icaldirresource.desktop
icalresource.desktop
imapresource.desktop
invitationsagent.desktop
kabcresource.desktop
kalarmdirresource.desktop
kalarmresource.desktop
kcalresource.desktop
kdeaccountsresource.desktop
knutresource.desktop
kolabproxyresource.desktop
localbookmarksresource.desktop
maildirresource.desktop
maildispatcheragent.desktop
mailfilteragent.desktop
mboxresource.desktop
microblog.desktop
mixedmaildirresource.desktop
mtdummyresource.desktop
nepomuktagresource.desktop
newmailnotifieragent.desktop
nntpresource.desktop
notesresource.desktop
openxchangeresource.desktop
pop3resource.desktop
sendlateragent.desktop
vcarddirresource.desktop
vcardresource.desktop
Environment variable XDG_DATA_DIRS is set to '/usr/share:/usr/share/kde-plasma:/usr/local/share/:/usr/share/'
Test 16: SUCCESS
--------
No current Akonadi server error log found.
Details: The Akonadi server did not report any errors during its current startup.
Test 17: SUCCESS
--------
No previous Akonadi server error log found.
Details: The Akonadi server did not report any errors during its previous startup.
Test 18: SUCCESS
--------
No current Akonadi control error log found.
Details: The Akonadi control process did not report any errors during its current startup.
Test 19: ERROR
--------
Previous Akonadi control error log found.
Details: The Akonadi control process reported errors during its previous startup. The log can be found in <a href='~/.local/share/akonadi/akonadi_control.error.old'>~/.local/share/akonadi/akonadi_control.error.old</a>.
File content of '~/.local/share/akonadi/akonadi_control.error.old':
Unable to register service as "org.freedesktop.Akonadi.Control.lock" Maybe it's already running?
"[
0: /usr/bin/akonadi_control() [0x42a1c8]
1: /usr/bin/akonadi_control() [0x42a452]
2: /lib/x86_64-linux-gnu/libc.so.6(+0x36ff0) [0x7fa237db2ff0]
3: /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x37) [0x7fa237db2f77]
4: /lib/x86_64-linux-gnu/libc.so.6(abort+0x148) [0x7fa237db65e8]
5: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x102) [0x7fa238de1912]
6: /usr/bin/akonadi_control() [0x42c3ad]
7: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0xb0) [0x7fa238e7c020]
8: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(+0x1183ad) [0x7fa238e893ad]
9: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x33) [0x7fa238e91f93]
10: /usr/bin/akonadi_control() [0x40c3c0]
11: /usr/bin/akonadi_control() [0x40908b]
12: /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5) [0x7fa237d9dde5]
13: /usr/bin/akonadi_control() [0x40939f]
]
"
D-Bus session bus went down - quitting
Auch bei mir sieht es so aus, dass ein Neustart nichts hilft. Ich habe akonadictl per Systemeinstellungen als Autostart eingefuegt, auch keine Aenderung. Mysql laeuft: $ sudo service mysql start
[sudo] password for [username]:
start: Job is already running: mysql
Auch Tids Vorschlag habe ich ein paarmal versucht, hilft aber nichts.
|
ChaosZarth
(Themenstarter)
Anmeldungsdatum: 7. Dezember 2007
Beiträge: 242
|
Also nach Tids Vorschlag: sudo apt-get update
sudo apt-get install -f
sudo apt-get dist-upgrade
sudo apt-get install kubuntu-desktop akonadi-server --reinstall und einem Neustart läuft erst mal alles rund. Hoffentlich bleibt es so... Ich bin der Meinung, dass es am Anfang auch schon mal funktioniert hatte ☺. Naja, jetzt läuft's. Mal sehen ob's nach einem Neustart auch noch läuft. ☺ Aber das teste ich heute nicht mehr, glaub ich.
|
Brotaffe
Anmeldungsdatum: 27. Oktober 2008
Beiträge: Zähle...
|
Moin moin allerseits, ich habe haargenau das gleiche Problem. | sudo apt-get install kubuntu-desktop akonadi-server --reinstall
|
Dies hat bei mir für genau einen Neustart Linderung gebracht, nach dem nächsten ging es dann wieder nicht mehr. Seitdem geht es nach mehrmaligem Neustart *manchmal* wieder. Es gab wohl bei KDE 4.2 ähnliche Probleme die mit apparmor zusammenhiengen. Allerdings haben die Lösungsvorsachläge dieser alten Threads bei mir nichts geholfen. Auch meine Akanodi Konfig Datien zu löschen hat nichts geholfen, außer dass ich meine Kontakte neu einpflegen musste (vorher backup machen!) Meine hier müsste ein Bugtracker eingerichtet werden - schätze das Problem ist weiter verbreitet als gedacht. Habt ihr extra Quellen in eurer Paketverwaltung aktiviert? Gruß,
brotaffe
|
Tids
Anmeldungsdatum: 29. Oktober 2008
Beiträge: 3065
Wohnort: Naumburg (Saale)
|
Habt ihr ein 64bit Kubuntu? könnt ihr
/usr/lib/x86_64-linux-gnu/qt4/bin/qdbus ausführen? Ansonsten hat Brotaffe recht. Das sollte man dann melden. Im Moment kann ich sonst auch nur bisschen random Zeug rein werfen, wie
mal mysql neu installieren akonadies sqlite backend testen Rechte im Homeverzeichnis ordentlich setzen, falls man mal zu unvorsichtig mit sudo war
|
HmpfCBR
Anmeldungsdatum: 22. Mai 2007
Beiträge: 4597
Wohnort: Leipzig
|
Tids schrieb: Ansonsten hat Brotaffe recht. Das sollte man dann melden.
Ein generelles Problem ist es glaube ich nicht. Bei mir hab ich das Problem noch nicht nachstellen können.
Hat sich da was geändert? Soweit ich mich erinnere, wird von den Akonadi-Entwicklern von sqlite deutlich abgeraten.
|
Tids
Anmeldungsdatum: 29. Oktober 2008
Beiträge: 3065
Wohnort: Naumburg (Saale)
|
HmpfCBR schrieb: Hat sich da was geändert? Soweit ich mich erinnere, wird von den Akonadi-Entwicklern von sqlite deutlich abgeraten.
Ich nutze es auf unserem Netbook ohne Probleme. Es ist auch erst seit Kubuntu 13.10 wirklich nutzbar, da es früher falsch Paketiert wurde und im falschen Verzeichnis lag.. Damit wirklich viel verwalten ist nicht so toll. Bei 6 Mail Adressen merkt man schon das es manchmal etwas träge ist. Nur auf dem Netbook haben wir nur eine und da gab es bisher nie Probleme (abgesehen von dem Paketierungsfehler und den daraus folgenden Symlinks die ich nutzen musste).
|
pitt-admin
Anmeldungsdatum: 11. Juli 2010
Beiträge: 1875
|
HmpfCBR schrieb:
Hat sich da was geändert? Soweit ich mich erinnere, wird von den Akonadi-Entwicklern von sqlite deutlich abgeraten.
Nein, es ist immer noch so, sollte man nicht benutzen. Ich würde es auch erst nutzen wenn die KDEler ist wirklich freigeben.
|
ChaosZarth
(Themenstarter)
Anmeldungsdatum: 7. Dezember 2007
Beiträge: 242
|
Mist, am Problem hat sich rein gar nichts geändert. ☹ Habe heute mehrmals rebootet:
Akonadi Server Self-Test Report
===============================
Test 1: SUCCESS
--------
Database driver found.
Details: The QtSQL driver 'QMYSQL' is required by your current Akonadi server configuration and was found on your system.
File content of '/home/karsten/.config/akonadi/akonadiserverrc':
[%General]
Driver=QMYSQL
[QMYSQL]
Name=akonadi
Host=
Options="UNIX_SOCKET=/tmp/akonadi-karsten.OZKRaD/mysql.socket"
ServerPath=/usr/sbin/mysqld-akonadi
StartServer=true
[Debug]
Tracer=null
Test 2: SUCCESS
--------
Akonadi is not running as root
Details: Akonadi is not running as a root/administrator user, which is the recommended setup for a secure system.
Test 3: SUCCESS
--------
MySQL server found.
Details: You have currently configured Akonadi to use the MySQL server '/usr/sbin/mysqld-akonadi'.
Make sure you have the MySQL server installed, set the correct path and ensure you have the necessary read and execution rights on the server executable. The server executable is typically called 'mysqld'; its location varies depending on the distribution.
Test 4: SUCCESS
--------
MySQL server is executable.
Details: MySQL server found: 131027 13:28:09 [Warning] Using unique option prefix key_buffer instead of key_buffer_size is deprecated and will be removed in a future release. Please use the full name instead.
/usr/sbin/mysqld Ver 5.5.34-0ubuntu0.13.10.1 for debian-linux-gnu on x86_64 ((Ubuntu))
Test 5: SUCCESS
--------
MySQL server log contains no errors.
Details: The MySQL server log file '<a href='/home/karsten/.local/share/akonadi/db_data/mysql.err'>/home/karsten/.local/share/akonadi/db_data/mysql.err</a>' does not contain any errors or warnings.
File content of '/home/karsten/.local/share/akonadi/db_data/mysql.err':
131027 13:01:11 [Note] Plugin 'FEDERATED' is disabled.
131027 13:01:11 InnoDB: The InnoDB memory heap is disabled
131027 13:01:11 InnoDB: Mutexes and rw_locks use GCC atomic builtins
131027 13:01:11 InnoDB: Compressed tables use zlib 1.2.8
131027 13:01:11 InnoDB: Using Linux native AIO
131027 13:01:11 InnoDB: Initializing buffer pool, size = 80.0M
131027 13:01:11 InnoDB: Completed initialization of buffer pool
131027 13:01:11 InnoDB: highest supported file format is Barracuda.
131027 13:01:28 InnoDB: Waiting for the background threads to start
131027 13:01:29 InnoDB: 5.5.34 started; log sequence number 449165294
131027 13:01:29 [Note] /usr/sbin/mysqld: ready for connections.
Version: '5.5.34-0ubuntu0.13.10.1' socket: '/tmp/akonadi-karsten.OZKRaD/mysql.socket' port: 0 (Ubuntu)
Test 6: SUCCESS
--------
MySQL server default configuration found.
Details: The default configuration for the MySQL server was found and is readable at <a href='/etc/akonadi/mysql-global.conf'>/etc/akonadi/mysql-global.conf</a>.
File content of '/etc/akonadi/mysql-global.conf':
#
# Global Akonadi MySQL server settings,
# These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf
#
# Based on advice by Kris Köhntopp <kris@mysql.com>
#
[mysqld]
# strict query parsing/interpretation
# TODO: make Akonadi work with those settings enabled
# sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat
# sql_mode=strict_trans_tables
# DEBUGGING:
# log all queries, useful for debugging but generates an enormous amount of data
# log=mysql.full
# log queries slower than n seconds, log file name relative to datadir (for debugging only)
# log_slow_queries=mysql.slow
# long_query_time=1
# log queries not using indices, debug only, disable for production use
# log_queries_not_using_indexes=1
#
# mesure database size and adjust innodb_buffer_pool_size
# SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema");
# NOTES:
# Keep Innob_log_waits and keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables)
#expire_logs_days=3
#sync_bin_log=0
# Use UTF-8 encoding for tables
character_set_server=utf8
collation_server=utf8_general_ci
# use InnoDB for transactions and better crash recovery
default_storage_engine=innodb
# memory pool InnoDB uses to store data dictionary information and other internal data structures (default:1M)
# Deprecated in MySQL >= 5.6.3
innodb_additional_mem_pool_size=1M
# memory buffer InnoDB uses to cache data and indexes of its tables (default:128M)
# Larger values means less I/O
innodb_buffer_pool_size=80M
# Create a .ibd file for each table (default:0)
innodb_file_per_table=1
# Write out the log buffer to the log file at each commit (default:1)
innodb_flush_log_at_trx_commit=2
# Buffer size used to write to the log files on disk (default:1M for builtin, 8M for plugin)
# larger values means less I/O
innodb_log_buffer_size=1M
# Size of each log file in a log group (default:5M) larger means less I/O but more time for recovery.
innodb_log_file_size=64M
# # error log file name, relative to datadir (default:hostname.err)
log_error=mysql.err
# print warnings and connection errors (default:1)
log_warnings=2
# Convert table named to lowercase
lower_case_table_names=1
# Maximum size of one packet or any generated/intermediate string. (default:1M)
max_allowed_packet=32M
# Maximum simultaneous connections allowed (default:100)
max_connections=256
# The two options below make no sense with prepared statements and/or transactions
# (make sense when having the same query multiple times)
# Memory allocated for caching query results (default:0 (disabled))
query_cache_size=0
# Do not cache results (default:1)
query_cache_type=0
# Do not use the privileges mechanisms
skip_grant_tables
# Do not listen for TCP/IP connections at all
skip_networking
# The number of open tables for all threads. (default:64)
table_open_cache=200
# How many threads the server should cache for reuse (default:0)
thread_cache_size=3
# wait 365d before dropping the DB connection (default:8h)
wait_timeout=31536000
[client]
default-character-set=utf8
Test 7: SKIP
--------
MySQL server custom configuration not available.
Details: The custom configuration for the MySQL server was not found but is optional.
Test 8: SUCCESS
--------
MySQL server configuration is usable.
Details: The MySQL server configuration was found at <a href='/home/karsten/.local/share/akonadi/mysql.conf'>/home/karsten/.local/share/akonadi/mysql.conf</a> and is readable.
File content of '/home/karsten/.local/share/akonadi/mysql.conf':
#
# Global Akonadi MySQL server settings,
# These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf
#
# Based on advice by Kris Köhntopp <kris@mysql.com>
#
[mysqld]
# strict query parsing/interpretation
# TODO: make Akonadi work with those settings enabled
# sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat
# sql_mode=strict_trans_tables
# DEBUGGING:
# log all queries, useful for debugging but generates an enormous amount of data
# log=mysql.full
# log queries slower than n seconds, log file name relative to datadir (for debugging only)
# log_slow_queries=mysql.slow
# long_query_time=1
# log queries not using indices, debug only, disable for production use
# log_queries_not_using_indexes=1
#
# mesure database size and adjust innodb_buffer_pool_size
# SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema");
# NOTES:
# Keep Innob_log_waits and keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables)
#expire_logs_days=3
#sync_bin_log=0
# Use UTF-8 encoding for tables
character_set_server=utf8
collation_server=utf8_general_ci
# use InnoDB for transactions and better crash recovery
default_storage_engine=innodb
# memory pool InnoDB uses to store data dictionary information and other internal data structures (default:1M)
# Deprecated in MySQL >= 5.6.3
innodb_additional_mem_pool_size=1M
# memory buffer InnoDB uses to cache data and indexes of its tables (default:128M)
# Larger values means less I/O
innodb_buffer_pool_size=80M
# Create a .ibd file for each table (default:0)
innodb_file_per_table=1
# Write out the log buffer to the log file at each commit (default:1)
innodb_flush_log_at_trx_commit=2
# Buffer size used to write to the log files on disk (default:1M for builtin, 8M for plugin)
# larger values means less I/O
innodb_log_buffer_size=1M
# Size of each log file in a log group (default:5M) larger means less I/O but more time for recovery.
innodb_log_file_size=64M
# # error log file name, relative to datadir (default:hostname.err)
log_error=mysql.err
# print warnings and connection errors (default:1)
log_warnings=2
# Convert table named to lowercase
lower_case_table_names=1
# Maximum size of one packet or any generated/intermediate string. (default:1M)
max_allowed_packet=32M
# Maximum simultaneous connections allowed (default:100)
max_connections=256
# The two options below make no sense with prepared statements and/or transactions
# (make sense when having the same query multiple times)
# Memory allocated for caching query results (default:0 (disabled))
query_cache_size=0
# Do not cache results (default:1)
query_cache_type=0
# Do not use the privileges mechanisms
skip_grant_tables
# Do not listen for TCP/IP connections at all
skip_networking
# The number of open tables for all threads. (default:64)
table_open_cache=200
# How many threads the server should cache for reuse (default:0)
thread_cache_size=3
# wait 365d before dropping the DB connection (default:8h)
wait_timeout=31536000
[client]
default-character-set=utf8
Test 9: SUCCESS
--------
akonadictl found and usable
Details: The program '/usr/bin/akonadictl' to control the Akonadi server was found and could be executed successfully.
Result:
Akonadi 1.10.3
Test 10: ERROR
--------
Akonadi control process not registered at D-Bus.
Details: The Akonadi control process is not registered at D-Bus which typically means it was not started or encountered a fatal error during startup.
Test 11: ERROR
--------
Akonadi server process not registered at D-Bus.
Details: The Akonadi server process is not registered at D-Bus which typically means it was not started or encountered a fatal error during startup.
Test 12: SUCCESS
--------
Nepomuk search service registered at D-Bus.
Details: The Nepomuk search service is registered at D-Bus which typically indicates it is operational.
Test 13: SUCCESS
--------
Nepomuk search service uses an appropriate backend.
Details: The Nepomuk search service uses one of the recommended backends.
Test 14: SKIP
--------
Protocol version check not possible.
Details: Without a connection to the server it is not possible to check if the protocol version meets the requirements.
Test 15: ERROR
--------
No resource agents found.
Details: No resource agents have been found, Akonadi is not usable without at least one. This usually means that no resource agents are installed or that there is a setup problem. The following paths have been searched: '/usr/share/akonadi/agents'. The XDG_DATA_DIRS environment variable is set to '/usr/share:/usr/share/kde-plasma:/usr/local/share/:/usr/share/'; make sure this includes all paths where Akonadi agents are installed.
Directory listing of '/usr/share/akonadi/agents':
akonadinepomukfeederagent.desktop
akonotesresource.desktop
archivemailagent.desktop
birthdaysresource.desktop
contactsresource.desktop
davgroupwareresource.desktop
facebookresource.desktop
googlecalendarresource.desktop
googlecontactsresource.desktop
icaldirresource.desktop
icalresource.desktop
imapresource.desktop
invitationsagent.desktop
kabcresource.desktop
kalarmdirresource.desktop
kalarmresource.desktop
kcalresource.desktop
kdeaccountsresource.desktop
knutresource.desktop
kolabproxyresource.desktop
localbookmarksresource.desktop
maildirresource.desktop
maildispatcheragent.desktop
mailfilteragent.desktop
mboxresource.desktop
microblog.desktop
mixedmaildirresource.desktop
mtdummyresource.desktop
nepomuktagresource.desktop
newmailnotifieragent.desktop
nntpresource.desktop
notesresource.desktop
openxchangeresource.desktop
pop3resource.desktop
sendlateragent.desktop
vcarddirresource.desktop
vcardresource.desktop
Environment variable XDG_DATA_DIRS is set to '/usr/share:/usr/share/kde-plasma:/usr/local/share/:/usr/share/'
Test 16: SUCCESS
--------
No current Akonadi server error log found.
Details: The Akonadi server did not report any errors during its current startup.
Test 17: SUCCESS
--------
No previous Akonadi server error log found.
Details: The Akonadi server did not report any errors during its previous startup.
Test 18: ERROR
--------
Current Akonadi control error log found.
Details: The Akonadi control process reported errors during its current startup. The log can be found in <a href='/home/karsten/.local/share/akonadi/akonadi_control.error'>/home/karsten/.local/share/akonadi/akonadi_control.error</a>.
File content of '/home/karsten/.local/share/akonadi/akonadi_control.error':
Unable to register service as "org.freedesktop.Akonadi.Control.lock" Maybe it's already running?
"[
0: /usr/bin/akonadi_control() [0x42a1c8]
1: /usr/bin/akonadi_control() [0x42a452]
2: /lib/x86_64-linux-gnu/libc.so.6(+0x36ff0) [0x7f520f499ff0]
3: /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x37) [0x7f520f499f77]
4: /lib/x86_64-linux-gnu/libc.so.6(abort+0x148) [0x7f520f49d5e8]
5: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x102) [0x7f52104c8912]
6: /usr/bin/akonadi_control() [0x42c3ad]
7: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0xb0) [0x7f5210563020]
8: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(+0x1183ad) [0x7f52105703ad]
9: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x33) [0x7f5210578f93]
10: /usr/bin/akonadi_control() [0x40c3c0]
11: /usr/bin/akonadi_control() [0x40908b]
12: /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5) [0x7f520f484de5]
13: /usr/bin/akonadi_control() [0x40939f]
]
"
Test 19: ERROR
--------
Previous Akonadi control error log found.
Details: The Akonadi control process reported errors during its previous startup. The log can be found in <a href='/home/karsten/.local/share/akonadi/akonadi_control.error.old'>/home/karsten/.local/share/akonadi/akonadi_control.error.old</a>.
File content of '/home/karsten/.local/share/akonadi/akonadi_control.error.old':
Unable to register service as "org.freedesktop.Akonadi.Control.lock" Maybe it's already running?
"[
0: /usr/bin/akonadi_control() [0x42a1c8]
1: /usr/bin/akonadi_control() [0x42a452]
2: /lib/x86_64-linux-gnu/libc.so.6(+0x36ff0) [0x7f424e587ff0]
3: /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x37) [0x7f424e587f77]
4: /lib/x86_64-linux-gnu/libc.so.6(abort+0x148) [0x7f424e58b5e8]
5: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x102) [0x7f424f5b6912]
6: /usr/bin/akonadi_control() [0x42c3ad]
7: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0xb0) [0x7f424f651020]
8: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(+0x1183ad) [0x7f424f65e3ad]
9: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x33) [0x7f424f666f93]
10: /usr/bin/akonadi_control() [0x40c3c0]
11: /usr/bin/akonadi_control() [0x40908b]
12: /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5) [0x7f424e572de5]
13: /usr/bin/akonadi_control() [0x40939f]
]
"
Habe sogar mal versucht akonadictl manuell zu (re)starten: karsten@karsten-System-Product-Name:~$ akonadictl restart
Akonadi is not running.
karsten@karsten-System-Product-Name:~$ akonadictl start
Unable to register service as "org.freedesktop.Akonadi.Control.lock" Maybe it's already running?
"[
0: /usr/bin/akonadi_control() [0x42a1c8]
1: /usr/bin/akonadi_control() [0x42a452]
2: /lib/x86_64-linux-gnu/libc.so.6(+0x36ff0) [0x7f520f499ff0]
3: /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x37) [0x7f520f499f77]
4: /lib/x86_64-linux-gnu/libc.so.6(abort+0x148) [0x7f520f49d5e8]
5: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x102) [0x7f52104c8912]
6: /usr/bin/akonadi_control() [0x42c3ad]
7: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0xb0) [0x7f5210563020]
8: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(+0x1183ad) [0x7f52105703ad]
9: /usr/lib/x86_64-linux-gnu/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x33) [0x7f5210578f93]
10: /usr/bin/akonadi_control() [0x40c3c0]
11: /usr/bin/akonadi_control() [0x40908b]
12: /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5) [0x7f520f484de5]
13: /usr/bin/akonadi_control() [0x40939f]
]
"
Error: akonadi_control was started but didn't register at D-Bus session bus.
Make sure your system is set up correctly! und das nachdem ich alle Tipps von Tids befolgt hatte; nur akonadi-backend-sqlite habe ich nicht installiert.
|
Tids
Anmeldungsdatum: 29. Oktober 2008
Beiträge: 3065
Wohnort: Naumburg (Saale)
|
pitt-admin schrieb: Ich würde es auch erst nutzen wenn die KDEler ist wirklich freigeben.
Haben sie doch schon lange. Es ist sogar Standard für alles Plasma-Active. (siehe techbase). Worauf man nur zu achten hat, ist eben wirklich das Akonadi backend zu installieren und nicht das von Qt vorinstallierte zu nutzen (geht glaube ohne setzen von Symlinks eh nicht mit akonadi). Und eben zu wissen, dass es wirklich langsamer ist je mehr Accounts man damit verbindet. ChaosZarth schrieb: Mist, am Problem hat sich rein gar nichts geändert. ☹ Habe heute mehrmals rebootet:
Wie siehts mit /usr/lib/x86_64-linux-gnu/qt4/bin/qdbus aus? Fehlermeldung oder kommt eine Lange Liste? und das nachdem ich alle Tipps von Tids befolgt hatte; nur akonadi-backend-sqlite habe ich nicht installiert.
Wenn wirklich nichts anderes geht könntest du das versuchen. Es tastet dein mysql backend Einstellungen nicht an. Du kannst später ohne Probleme wieder zurück wechseln und bist dann eben auf dem Stand wo du es verlassen hast. Ist immerhin die bessere Alternative (wenn es denn geht) zu "geht gar nicht mehr", finde ich. 😉
|