Servus,
ich hab das gleiche Problem wie hier
https://forum.ubuntuusers.de/topic/probleme-mit-hp-drucker-nach-update-auf-18-04/#post-9013561
nämlich dass ich seit meinem Update auf 18.04 nicht mehr drucken kann, weil mein HP-Drucker den Druckauftrag gleich stoppt, nachdem ich ihn aufgegeben habe. Zuvor sagt mir das System noch, dass der Auftrag beendet wurde.
Ich habe HPLIP HPLIP installiert und
zuerst
hp-check -r
mit dem Ergebnis
----------- | SUMMARY | ----------- Missing Required Dependencies ----------------------------- error: 'libcups2' package is missing/incompatible error: 'libcups2-dev' package is missing/incompatible error: 'cups-bsd' package is missing/incompatible error: 'cups-client' package is missing/incompatible error: 'libcupsimage2-dev' package is missing/incompatible error: 'libusb-1.0.0-dev' package is missing/incompatible error: 'libsane-dev' package is missing/incompatible error: 'libsnmp-dev' package is missing/incompatible error: 'snmp-mibs-downloader' package is missing/incompatible error: 'libtool' package is missing/incompatible error: 'libtool-bin' package is missing/incompatible Missing Optional Dependencies ----------------------------- error: 'gtk2-engines-pixbuf' package is missing/incompatible error: 'xsane' package is missing/incompatible Total Errors: 8 Total Warnings: 0 Done.
erhalten.
Dann habe ich die fehlenden Pakete nachinstalliert (in erster Linie waren das die *dev-Pakete).
Danach lieferte hp-check -r Folgendes
HP Linux Imaging and Printing System (ver. 3.17.10) Dependency/Version Check Utility ver. 15.1 Copyright (c) 2001-15 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Check types: a. EXTERNALDEP - External Dependencies b. GENERALDEP - General Dependencies (required both at compile and run time) c. COMPILEDEP - Compile time Dependencies d. [All are run-time checks] PYEXT SCANCONF QUEUES PERMISSION Status Types: OK MISSING - Missing Dependency or Permission or Plug-in INCOMPAT - Incompatible dependency-version or Plugin-version |Gtk-Message: 12:37:48.871: Failed to load module "canberra-gtk-module" warning: 12-18.04 version is not supported. Using 12-17.04 versions dependencies to verify and install... --------------- | SYSTEM INFO | --------------- Kernel: 4.15.0-041500-generic #201802011154 SMP Thu Feb 1 11:55:45 UTC 2018 GNU/Linux Host: kini Proc: 4.15.0-041500-generic #201802011154 SMP Thu Feb 1 11:55:45 UTC 2018 GNU/Linux Distribution: 12 18.04 Bitness: 64 bit ----------------------- | HPLIP CONFIGURATION | ----------------------- HPLIP-Version: HPLIP 3.17.10 HPLIP-Home: /usr/share/hplip warning: HPLIP-Installation: Auto installation is not supported for 12 distro 18.04 version Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.17.10 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hplip/HP ppdbase=/usr/share/ppd/hplip doc=/usr/share/doc/hplip html=/usr/share/doc/hplip-doc icon=no cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv bin=/usr/bin apparmor=/etc/apparmor.d # Following values are determined at configure time and cannot be changed. [configure] network-build=yes libusb01-build=no pp-build=yes gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no hpijs-install=yes foomatic-drv-install=yes foomatic-ppd-install=yes foomatic-rip-hplip-install=no hpcups-install=yes cups-drv-install=yes cups-ppd-install=no internal-tag=3.17.10 restricted-build=no ui-toolkit=qt5 qt3=no qt4=no qt5=yes policy-kit=yes lite-build=no udev_sysfs_rules=no hpcups-only-build=no hpijs-only-build=no apparmor_build=no Current contents of '/var/lib/hp/hplip.state' file: Plugins are not installed. Could not access file: No such file or directory Current contents of '~/.hplip/hplip.conf' file: [commands] scan = /usr/bin/simple-scan %SANE_URI% [fax] email_address = voice_phone = [last_used] device_uri = "hp:/usb/ENVY_5530_series?serial=CN4CL460XK067B" printer_name = ENVY_5530 working_dir = . [polling] device_list = enable = false interval = 5 [refresh] enable = false rate = 30 type = 1 [settings] systray_messages = 0 systray_visible = 0 [upgrade] last_upgraded_time = 1502606671 notify_upgrade = false pending_upgrade_time = 0 [installation] date_time = 10/08/18 12:37:50 version = 3.17.10 <Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment> ------------------------- | External Dependencies | ------------------------- cups CUPS - Common Unix Printing System REQUIRED 1.1 2.2.7 OK 'CUPS Scheduler is running' gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.25 OK - Gtk-Message: 12:37:51.449: Failed to load module "canberra-gtk-module" Gtk-Message: 12:37:51.479: Failed to load module "canberra-gtk-module" xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK - scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.27 OK - dbus DBus - Message bus system REQUIRED - 1.12.2 OK - policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK - network network -wget OPTIONAL - 1.19.4 OK - avahi-utils avahi-utils OPTIONAL - 0.7 OK - ------------------------ | General Dependencies | ------------------------ libjpeg libjpeg - JPEG library REQUIRED - - OK - cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.2.7 OK - cups-image CUPS image - CUPS image development files REQUIRED - 2.2.7 OK - libpthread libpthread - POSIX threads library REQUIRED - b'2.27' OK - libusb libusb - USB library REQUIRED - 1.0 OK - sane SANE - Scanning library REQUIRED - - OK - sane-devel SANE - Scanning library development files REQUIRED - - OK - libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.7.3 OK - libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.0 OK - python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.6.6 OK - python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK - python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 4.12.1 OK - python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 4.12.1 OK - python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.6 OK - python3-xml Python XML libraries REQUIRED - 2.2.5 OK - python3-devel Python devel - Python development files REQUIRED 2.2 3.6.6 OK - python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK - python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.4.0 OK - -------------- | COMPILEDEP | -------------- libtool libtool - Library building support services REQUIRED - 2.4.6 OK - gcc gcc - GNU Project C and C++ Compiler REQUIRED - 7.3.0 OK - make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.1 OK - --------------------- | Python Extentions | --------------------- cupsext CUPS-Extension REQUIRED - 3.17.10 OK - hpmudext IO-Extension REQUIRED - 3.17.10 OK - ---------------------- | Scan Configuration | ---------------------- '/etc/sane.d/dll.d/hpaio' not found. hpaio HPLIP-SANE-Backend REQUIRED - 3.17.10 OK 'hpaio found in /etc/sane.d/dll.conf' scanext Scan-SANE-Extension REQUIRED - 3.17.10 OK - ------------------------------ | DISCOVERED SCANNER DEVICES | ------------------------------ device `hpaio:/usb/ENVY_5530_series?serial=CN4CL460XK067B' is a Hewlett-Packard ENVY_5530_series all-in-one device `hpaio:/net/envy_5530_series?ip=192.168.178.28&queue=false' is a Hewlett-Packard envy_5530_series all-in-one -------------------------- | DISCOVERED USB DEVICES | -------------------------- Device URI Model -------------------------------- ------------------- hp:/usb/ENVY_5530_series?serial= HP ENVY 5530 series CN4CL460XK067B --------------------------------- | INSTALLED CUPS PRINTER QUEUES | --------------------------------- ENVY_5530 --------- Type: Printer Device URI: hp:/usb/ENVY_5530_series?serial=CN4CL460XK067B PPD: /etc/cups/ppd/ENVY_5530.ppd warning: Failed to read /etc/cups/ppd/ENVY_5530.ppd ppd file PPD Description: Printer status: Drucker ENVY_5530 ist im Leerlauf. Aktiviert seit Mo 08 Okt 2018 12:25:Filter failed Communication status: Good HP-ENVY-5530-series-usb ----------------------- Type: Printer Device URI: hp:/usb/ENVY_5530_series?serial=CN4CL460XK067B PPD: /etc/cups/ppd/HP-ENVY-5530-series-usb.ppd warning: Failed to read /etc/cups/ppd/HP-ENVY-5530-series-usb.ppd ppd file PPD Description: Printer status: Drucker HP-ENVY-5530-series-usb ist im Leerlauf. Aktiviert seit Mo 08 OFilter failed:15 CEST Communication status: Good -------------- | PERMISSION | -------------- USB ENVY_5530 Required - - OK Node:'/dev/bus/usb/001/002' Perm:' root lp rw- rw- rw- rw- r--' No errors or warnings. Done.
hp-doctor
zeigt Folgendes:
Traceback (most recent call last): File "/usr/bin/hp-doctor", line 42, in <module> check_extension_module_env('cupsext') File "/usr/share/hplip/base/g.py", line 339, in check_extension_module_env python_ver = xint((sys.version).split(' ')[0]) #find the current python version ; xint() to convert string to int, returns a list File "/usr/share/hplip/base/g.py", line 331, in xint return l UnboundLocalError: local variable 'l' referenced before assignment
Damit kann ich aber nix anfangen.
Soweit ich die Ausgabe von hp-check verstehe, wurden keine Fehler mehr gefunden. Der Drucker druckt aber trotzdem nicht.
Gibt es eine andere Abhilfe als die Neuinstallation? Bei //ubuntuusers.de/user/roteiro/: hat das zwar geholfen, aber es sollte doch auch einen anderen Weg geben.
Schönen Gruß
kibuntu
Bearbeitet von sebix:
Wikilink korrigiert.