Ok ich hab mir den Treiber von der Ralink Website geholt
(Im Wiki stand nur was von der 24xx und 25xx reihe daher dachte ich lieber von da und auf nummer sicher gehen)
Allerdings bin ich mit dem installieren etwas überfordert =))
In der Readme Steht
=======================================================================
Build Instructions:
====================
1> $tar -xvzf DPB_RT2860_Linux_STA_x.x.x.x.tgz
go to "./DPB_RT2860_Linux_STA_x.x.x.x" directory.
2> In Makefile
set the "MODE = STA" in Makefile and chose the TARGET to Linux by set "TARGET = LINUX"
define the linux kernel source include file path LINUX_SRC
modify to meet your need.
3> In os/linux/config.mk
define the GCC and LD of the target machine
define the compiler flags CFLAGS
modify to meet your need.
** Build for being controlled by NetworkManager or wpa_supplicant wext functions
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y'.
=> #>cd wpa_supplicant-x.x
=> #>./wpa_supplicant -Dwext -ira0 -c wpa_supplicant.conf -d
** Build for being controlled by WpaSupplicant with Ralink Driver
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n'.
=> #>cd wpa_supplicant-0.5.7
=> #>./wpa_supplicant -Dralink -ira0 -c wpa_supplicant.conf -d
4> $make
# compile driver source code
# To fix "error: too few arguments to function ¡¥iwe_stream_add_event"
=> $patch -i os/linux/sta_ioctl.c.patch os/linux/sta_ioctl.c
5> $cp RT2860STA.dat /etc/Wireless/RT2860STA/RT2860STA.dat
6> load driver
#[kernel 2.4]
# $/sbin/insmod rt2860sta.o
# $/sbin/ifconfig ra0 inet YOUR_IP up
#[kernel 2.6]
# $/sbin/insmod rt2860sta.ko
# $/sbin/ifconfig ra0 inet YOUR_IP up
7> unload driver
$/sbin/ifconfig ra0 down
$/sbin/rmmod rt2860sta
Ich habe das was in der Readme steht so angepasst das es auf den Dateinamen der Heruntergeladenen Datei Passt.
/Desktop$ gzip 2008_0918_RT2860_Linux_STA_v1.8.0.0.tar.bz2
Jetzt habe ich eine entpackte Datei auf dem Desktop,allerdings verstehe ich von dem rest der Readme und dem Wiki-Artikel zu Makefile nur Bahnhof ☹
[EDIT] Habe eben mal auf gut Glück "sudo make" in dem Verzeichniss eingegeben und der scheint durchgelaufen zu sein (nur paar Warnungen)
[EDIT2] Ok war scheints keine gute Idee Schritt 2+3 zu überspringen, jetzt findet er bei 5 das Verzeichniss nicht.
Kann mir jemand erklären was ich bei Schritt 2+3 machen muss?