Berlin_1946
Supporter, Wikiteam
Anmeldungsdatum: 18. September 2009
Beiträge: 8678
|
Hallo in die Runde, im Live- System ist die Anzeige o.k. Im installierten System ist die Anzeige nur 800x600 möglich. Dort hin komme ich über den Recovery_Mode und dpkg = kaputte Pakete reparieren. hp-desktop@hpdesktop-HP-ProDesk-600-G1-TWR:~$ lspci -nnk | grep -A3 "\[03..\]:"00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06)
Subsystem: Hewlett-Packard Company Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [103c:18e7]
Kernel modules: i915
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
hp-desktop@hpdesktop-HP-ProDesk-600-G1-TWR: der gleich Treiben wird im Live- System benutzt ubuntu@ubuntu:~$ lspci -nnk| grep -i VGA -A2
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06)
Subsystem: Hewlett-Packard Company Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [103c:18e7]
Kernel driver in use: i915
ubuntu@ubuntu:~$
hp-desktop@hpdesktop-HP-ProDesk-600-G1-TWR:~$ xrandr --prop
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 800 x 600, current 800 x 600, maximum 800 x 600
default connected primary 800x600+0+0 0mm x 0mm
_MUTTER_PRESENTATION_OUTPUT: 0
non-desktop: 0
supported: 0, 1
800x600 75.00*
hp-desktop@hpdesktop-HP-ProDesk-600-G1-TWR:~$
Moderiert von ChickenLipsRfun2eat: Thema nach erarbeiten der Details in einen passenderen Forenbereich verschoben.
|
Berlin_1946
Supporter, Wikiteam
(Themenstarter)
Anmeldungsdatum: 18. September 2009
Beiträge: 8678
|
alterpinguin schrieb: das verstehe ich nicht: Du kommst im installierten System nur über den "recovery-modus" zu einer Anzeige? Wie sehen die grub-Optionen zum Boot des Linux-Kernels aus?
Ja, so ist es, meinst die diese Abfrage? hp-desktop@hpdesktop-HP-ProDesk-600-G1-TWR:~$ cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-4.18.0-17-generic root=UUID=22356704-b047-4a8a-ae35-1b495ee40071 ro recovery nomodeset
hp-desktop@hpdesktop-HP-ProDesk-600-G1-TWR:~$ Wenn das falsch ist, was meinst du?
|
Berlin_1946
Supporter, Wikiteam
(Themenstarter)
Anmeldungsdatum: 18. September 2009
Beiträge: 8678
|
Letalis_Sonus schrieb: Wir bräuchten dann einmal den Xorg log (sollte er nicht bis zum Starten des X Servers kommen: den Kernel Log) von einem Startversuch ohne Recovery Modus.
Hallo, die log - Dateien. * hp-desktop@hpdesktop-HP-ProDesk-600-G1-TWR:/var/log$ nl Xorg.0.log
* 1 [ 28.182] (--) Log file renamed from "/var/log/Xorg.pid-1431.log" to "/var/log/Xorg.0.log"
* 2 [ 28.182]
* 3 X.Org X Server 1.20.1
* 4 X Protocol Version 11, Revision 0
* 5 [ 28.182] Build Operating System: Linux 4.4.0-140-generic x86_64 Ubuntu
* 6 [ 28.182] Current Operating System: Linux hpdesktop-HP-ProDesk-600-G1-TWR 4.18.0-17-generic #18~18.04.1-Ubuntu SMP Fri Mar 15 15:27:12 UTC 2019 x86_64
* 7 [ 28.182] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-17-generic root=UUID=22356704-b047-4a8a-ae35-1b495ee40071 ro recovery nomodeset
* 8 [ 28.182] Build Date: 27 November 2018 05:27:12PM
* 9 [ 28.182] xorg-server-hwe-18.04 2:1.20.1-3ubuntu2.1~18.04.1 (For technical support please see http://www.ubuntu.com/support)
* 10 [ 28.182] Current version of pixman: 0.34.0
* 11 [ 28.182] Before reporting problems, check http://wiki.x.org
* 12 to make sure that you have the latest version.
* 13 [ 28.182] Markers: (--) probed, (**) from config file, (==) default setting,
* 14 (++) from command line, (!!) notice, (II) informational,
* 15 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
* 16 [ 28.182] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 14 10:14:24 2019
* 17 [ 28.183] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
* 18 [ 28.184] (==) No Layout section. Using the first Screen section.
* 19 [ 28.184] (==) No screen section available. Using defaults.
* 20 [ 28.184] (**) |-->Screen "Default Screen Section" (0)
* 21 [ 28.184] (**) | |-->Monitor "<default monitor>"
* 22 [ 28.185] (==) No monitor specified for screen "Default Screen Section".
* 23 Using a default monitor configuration.
* 24 [ 28.185] (==) Automatically adding devices
* 25 [ 28.185] (==) Automatically enabling devices
* 26 [ 28.185] (==) Automatically adding GPU devices
* 27 [ 28.185] (==) Automatically binding GPU devices
* 28 [ 28.185] (==) Max clients allowed: 256, resource mask: 0x1fffff
* 29 [ 28.185] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
* 30 [ 28.185] Entry deleted from font path.
* 31 [ 28.185] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
* 32 [ 28.185] Entry deleted from font path.
* 33 [ 28.185] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
* 34 [ 28.185] Entry deleted from font path.
* 35 [ 28.185] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
* 36 [ 28.185] Entry deleted from font path.
* 37 [ 28.185] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
* 38 [ 28.185] Entry deleted from font path.
* 39 [ 28.185] (==) FontPath set to:
* 40 /usr/share/fonts/X11/misc,
* 41 /usr/share/fonts/X11/Type1,
* 42 built-ins
* 43 [ 28.185] (==) ModulePath set to "/usr/lib/xorg/modules"
* 44 [ 28.185] (II) The server relies on udev to provide the list of input devices.
* 45 If no devices become available, reconfigure udev or disable AutoAddDevices.
* 46 [ 28.185] (II) Loader magic: 0x558b81d54020
* 47 [ 28.185] (II) Module ABI versions:
* 48 [ 28.185] X.Org ANSI C Emulation: 0.4
* 49 [ 28.185] X.Org Video Driver: 24.0
* 50 [ 28.185] X.Org XInput driver : 24.1
* 51 [ 28.185] X.Org Server Extension : 10.0
* 52 [ 28.185] (++) using VT number 1
*
* 53 [ 28.187] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
* 54 [ 28.188] (--) PCI:*(0@0:2:0) 8086:0412:103c:18e7 rev 6, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
* 55 [ 28.188] (II) LoadModule: "glx"
* 56 [ 28.189] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
* 57 [ 28.191] (II) Module glx: vendor="X.Org Foundation"
* 58 [ 28.191] compiled for 1.20.1, module version = 1.0.0
* 59 [ 28.191] ABI class: X.Org Server Extension, version 10.0
* 60 [ 28.191] (==) Matched modesetting as autoconfigured driver 0
* 61 [ 28.191] (==) Matched fbdev as autoconfigured driver 1
* 62 [ 28.191] (==) Matched vesa as autoconfigured driver 2
* 63 [ 28.191] (==) Assigned the driver to the xf86ConfigLayout
* 64 [ 28.191] (II) LoadModule: "modesetting"
* 65 [ 28.191] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
* 66 [ 28.192] (II) Module modesetting: vendor="X.Org Foundation"
* 67 [ 28.192] compiled for 1.20.1, module version = 1.20.1
* 68 [ 28.192] Module class: X.Org Video Driver
* 69 [ 28.192] ABI class: X.Org Video Driver, version 24.0
* 70 [ 28.192] (II) LoadModule: "fbdev"
* 71 [ 28.192] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
* 72 [ 28.193] (II) Module fbdev: vendor="X.Org Foundation"
* 73 [ 28.193] compiled for 1.20.1, module version = 0.5.0
* 74 [ 28.193] Module class: X.Org Video Driver
* 75 [ 28.193] ABI class: X.Org Video Driver, version 24.0
* 76 [ 28.193] (II) LoadModule: "vesa"
* 77 [ 28.193] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
* 78 [ 28.193] (II) Module vesa: vendor="X.Org Foundation"
* 79 [ 28.193] compiled for 1.20.1, module version = 2.4.0
* 80 [ 28.193] Module class: X.Org Video Driver
* 81 [ 28.193] ABI class: X.Org Video Driver, version 24.0
* 82 [ 28.193] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
* 83 [ 28.193] (II) FBDEV: driver for framebuffer: fbdev
* 84 [ 28.193] (II) VESA: driver for VESA chipsets: vesa
* 85 [ 28.193] (EE) open /dev/dri/card0: No such file or directory
* 86 [ 28.193] (WW) Falling back to old probe method for modesetting
* 87 [ 28.193] (EE) open /dev/dri/card0: No such file or directory
* 88 [ 28.193] (II) Loading sub module "fbdevhw"
* 89 [ 28.193] (II) LoadModule: "fbdevhw"
* 90 [ 28.193] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
* 91 [ 28.194] (II) Module fbdevhw: vendor="X.Org Foundation"
* 92 [ 28.194] compiled for 1.20.1, module version = 0.0.2
* 93 [ 28.194] ABI class: X.Org Video Driver, version 24.0
* 94 [ 28.194] (**) FBDEV(1): claimed PCI slot 0@0:2:0
* 95 [ 28.194] (II) FBDEV(1): using default device
* 96 [ 28.194] (EE) Screen 0 deleted because of no matching config section.
* 97 [ 28.194] (II) UnloadModule: "modesetting"
* 98 [ 28.194] (II) FBDEV(0): Creating default Display subsection in Screen section
* 99 "Default Screen Section" for depth/fbbpp 24/32
* 100 [ 28.194] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
* 101 [ 28.194] (==) FBDEV(0): RGB weight 888
* 102 [ 28.194] (==) FBDEV(0): Default visual is TrueColor
* 103 [ 28.194] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
* 104 [ 28.194] (II) FBDEV(0): hardware: EFI VGA (video memory: 1920kB)
* 105 [ 28.194] (II) FBDEV(0): checking modes against framebuffer device...
* 106 [ 28.194] (II) FBDEV(0): checking modes against monitor...
* 107 [ 28.194] (II) FBDEV(0): Virtual size is 800x600 (pitch 800)
* 108 [ 28.194] (**) FBDEV(0): Built-in mode "current": 48.0 MHz, 46.9 kHz, 75.1 Hz
* 109 [ 28.194] (II) FBDEV(0): Modeline "current"x0.0 48.00 800 832 928 1024 600 604 608 624 -hsync -vsync -csync (46.9 kHz b)
* 110 [ 28.194] (==) FBDEV(0): DPI set to (96, 96)
* 111 [ 28.194] (II) Loading sub module "fb"
* 112 [ 28.194] (II) LoadModule: "fb"
* 113 [ 28.194] (II) Loading /usr/lib/xorg/modules/libfb.so
* 114 [ 28.195] (II) Module fb: vendor="X.Org Foundation"
* 115 [ 28.195] compiled for 1.20.1, module version = 1.0.0
* 116 [ 28.195] ABI class: X.Org ANSI C Emulation, version 0.4
* 117 [ 28.195] (**) FBDEV(0): using shadow framebuffer
* 118 [ 28.195] (II) Loading sub module "shadow"
* 119 [ 28.195] (II) LoadModule: "shadow"
* 120 [ 28.195] (II) Loading /usr/lib/xorg/modules/libshadow.so
* 121 [ 28.195] (II) Module shadow: vendor="X.Org Foundation"
* 122 [ 28.195] compiled for 1.20.1, module version = 1.1.0
* 123 [ 28.195] ABI class: X.Org ANSI C Emulation, version 0.4
* 124 [ 28.195] (II) UnloadModule: "vesa"
* 125 [ 28.195] (II) Unloading vesa
* 126 [ 28.195] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling)
* 127 [ 28.197] (==) FBDEV(0): Backing store enabled
* 128 [ 28.198] (==) FBDEV(0): DPMS enabled
* 129 [ 28.198] (II) Initializing extension Generic Event Extension
* 130 [ 28.198] (II) Initializing extension SHAPE
* 131 [ 28.199] (II) Initializing extension MIT-SHM
* 132 [ 28.199] (II) Initializing extension XInputExtension
* 133 [ 28.199] (II) Initializing extension XTEST
* 134 [ 28.199] (II) Initializing extension BIG-REQUESTS
* 135 [ 28.199] (II) Initializing extension SYNC
* 136 [ 28.200] (II) Initializing extension XKEYBOARD
* 137 [ 28.200] (II) Initializing extension XC-MISC
* 138 [ 28.200] (II) Initializing extension SECURITY
* 139 [ 28.200] (II) Initializing extension XFIXES
* 140 [ 28.200] (II) Initializing extension RENDER
* 141 [ 28.200] (II) Initializing extension RANDR
* 142 [ 28.200] (II) Initializing extension COMPOSITE
* 143 [ 28.201] (II) Initializing extension DAMAGE
* 144 [ 28.201] (II) Initializing extension MIT-SCREEN-SAVER
* 145 [ 28.201] (II) Initializing extension DOUBLE-BUFFER
* 146 [ 28.201] (II) Initializing extension RECORD
* 147 [ 28.201] (II) Initializing extension DPMS
* 148 [ 28.201] (II) Initializing extension Present
* 149 [ 28.201] (II) Initializing extension DRI3
* 150 [ 28.201] (II) Initializing extension X-Resource
* 151 [ 28.201] (II) Initializing extension XVideo
* 152 [ 28.202] (II) Initializing extension XVideo-MotionCompensation
* 153 [ 28.202] (II) Initializing extension SELinux
* 154 [ 28.202] (II) SELinux: Disabled on system
* 155 [ 28.202] (II) Initializing extension GLX
* 156 [ 28.202] (II) AIGLX: Screen 0 is not DRI2 capable
* 157 [ 28.246] (II) IGLX: Loaded and initialized swrast
* 158 [ 28.247] (II) GLX: Initialized DRISWRAST GL provider for screen 0
* 159 [ 28.247] (II) Initializing extension XFree86-VidModeExtension
* 160 [ 28.247] (II) Initializing extension XFree86-DGA
* 161 [ 28.247] (II) Initializing extension XFree86-DRI
* 162 [ 28.248] (II) Initializing extension DRI2
* 163 [ 28.290] (II) config/udev: Adding input device Power Button (/dev/input/event1)
* 164 [ 28.290] (**) Power Button: Applying InputClass "libinput keyboard catchall"
* 165 [ 28.290] (II) LoadModule: "libinput"
* 166 [ 28.290] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
* 167 [ 28.292] (II) Module libinput: vendor="X.Org Foundation"
* 168 [ 28.292] compiled for 1.20.1, module version = 0.28.1
* 169 [ 28.292] Module class: X.Org XInput Driver
* 170 [ 28.292] ABI class: X.Org XInput driver, version 24.1
* 171 [ 28.292] (II) Using input driver 'libinput' for 'Power Button'
* 172 [ 28.295] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 22 paused 0
* 173 [ 28.295] (**) Power Button: always reports core events
* 174 [ 28.295] (**) Option "Device" "/dev/input/event1"
* 175 [ 28.295] (**) Option "_source" "server/udev"
* 176 [ 28.295] (II) event1 - Power Button: is tagged by udev as: Keyboard
* 177 [ 28.295] (II) event1 - Power Button: device is a keyboard
* 178 [ 28.295] (II) event1 - Power Button: device removed
* 179 [ 28.295] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
* 180 [ 28.295] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
* 181 [ 28.295] (**) Option "xkb_model" "pc105"
* 182 [ 28.295] (**) Option "xkb_layout" "de"
* 183 [ 28.322] (II) event1 - Power Button: is tagged by udev as: Keyboard
* 184 [ 28.323] (II) event1 - Power Button: device is a keyboard
* 185 [ 28.323] (II) config/udev: Adding input device Power Button (/dev/input/event0)
* 186 [ 28.323] (**) Power Button: Applying InputClass "libinput keyboard catchall"
* 187 [ 28.323] (II) Using input driver 'libinput' for 'Power Button'
* 188 [ 28.324] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 25 paused 0
* 189 [ 28.324] (**) Power Button: always reports core events
* 190 [ 28.324] (**) Option "Device" "/dev/input/event0"
* 191 [ 28.324] (**) Option "_source" "server/udev"
* 192 [ 28.324] (II) event0 - Power Button: is tagged by udev as: Keyboard
* 193 [ 28.324] (II) event0 - Power Button: device is a keyboard
* 194 [ 28.324] (II) event0 - Power Button: device removed
* 195 [ 28.324] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
* 196 [ 28.325] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
* 197 [ 28.325] (**) Option "xkb_model" "pc105"
* 198 [ 28.325] (**) Option "xkb_layout" "de"
* 199 [ 28.325] (II) event0 - Power Button: is tagged by udev as: Keyboard
* 200 [ 28.325] (II) event0 - Power Button: device is a keyboard
* 201 [ 28.326] (II) config/udev: Adding input device Chicony Chicony wired mouse (/dev/input/event5)
* 202 [ 28.326] (**) Chicony Chicony wired mouse: Applying InputClass "libinput pointer catchall"
* 203 [ 28.326] (II) Using input driver 'libinput' for 'Chicony Chicony wired mouse'
* 204 [ 28.384] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 26 paused 0
* 205 [ 28.384] (**) Chicony Chicony wired mouse: always reports core events
* 206 [ 28.384] (**) Option "Device" "/dev/input/event5"
* 207 [ 28.384] (**) Option "_source" "server/udev"
* 208 [ 28.384] (II) event5 - Chicony Chicony wired mouse: is tagged by udev as: Mouse
* 209 [ 28.384] (II) event5 - Chicony Chicony wired mouse: device is a pointer
* 210 [ 28.384] (II) event5 - Chicony Chicony wired mouse: device removed
* 211 [ 28.385] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12.1/3-12.1:1.0/0003:04F2:0718.0003/input/input8/event5"
* 212 [ 28.385] (II) XINPUT: Adding extended input device "Chicony Chicony wired mouse" (type: MOUSE, id 8)
* 213 [ 28.386] (**) Option "AccelerationScheme" "none"
* 214 [ 28.386] (**) Chicony Chicony wired mouse: (accel) selected scheme none/0
* 215 [ 28.386] (**) Chicony Chicony wired mouse: (accel) acceleration factor: 2.000
* 216 [ 28.386] (**) Chicony Chicony wired mouse: (accel) acceleration threshold: 4
* 217 [ 28.386] (II) event5 - Chicony Chicony wired mouse: is tagged by udev as: Mouse
* 218 [ 28.386] (II) event5 - Chicony Chicony wired mouse: device is a pointer
* 219 [ 28.387] (II) config/udev: Adding input device Chicony Chicony wired mouse (/dev/input/mouse0)
* 220 [ 28.387] (II) No input driver specified, ignoring this device.
* 221 [ 28.387] (II) This device may have been added with another device file.
* 222 [ 28.387] (II) config/udev: Adding input device LOGITECH USB Keyboard (/dev/input/event2)
* 223 [ 28.387] (**) LOGITECH USB Keyboard: Applying InputClass "libinput keyboard catchall"
* 224 [ 28.387] (II) Using input driver 'libinput' for 'LOGITECH USB Keyboard'
* 225 [ 28.388] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 27 paused 0
* 226 [ 28.388] (**) LOGITECH USB Keyboard: always reports core events
* 227 [ 28.388] (**) Option "Device" "/dev/input/event2"
* 228 [ 28.388] (**) Option "_source" "server/udev"
* 229 [ 28.389] (II) event2 - LOGITECH USB Keyboard: is tagged by udev as: Keyboard
* 230 [ 28.389] (II) event2 - LOGITECH USB Keyboard: device is a keyboard
* 231 [ 28.389] (II) event2 - LOGITECH USB Keyboard: device removed
* 232 [ 28.389] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:046D:C301.0001/input/input5/event2"
* 233 [ 28.389] (II) XINPUT: Adding extended input device "LOGITECH USB Keyboard" (type: KEYBOARD, id 9)
* 234 [ 28.389] (**) Option "xkb_model" "pc105"
* 235 [ 28.389] (**) Option "xkb_layout" "de"
* 236 [ 28.390] (II) event2 - LOGITECH USB Keyboard: is tagged by udev as: Keyboard
* 237 [ 28.390] (II) event2 - LOGITECH USB Keyboard: device is a keyboard
* 238 [ 28.390] (II) config/udev: Adding input device LOGITECH USB Keyboard Consumer Control (/dev/input/event3)
* 239 [ 28.391] (**) LOGITECH USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
* 240 [ 28.391] (II) Using input driver 'libinput' for 'LOGITECH USB Keyboard Consumer Control'
* 241 [ 28.391] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 28 paused 0
* 242 [ 28.391] (**) LOGITECH USB Keyboard Consumer Control: always reports core events
* 243 [ 28.391] (**) Option "Device" "/dev/input/event3"
* 244 [ 28.391] (**) Option "_source" "server/udev"
* 245 [ 28.392] (II) event3 - LOGITECH USB Keyboard Consumer Control: is tagged by udev as: Keyboard
* 246 [ 28.392] (II) event3 - LOGITECH USB Keyboard Consumer Control: device is a keyboard
* 247 [ 28.392] (II) event3 - LOGITECH USB Keyboard Consumer Control: device removed
* 248 [ 28.392] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:046D:C301.0002/input/input6/event3"
* 249 [ 28.393] (II) XINPUT: Adding extended input device "LOGITECH USB Keyboard Consumer Control" (type: KEYBOARD, id 10)
* 250 [ 28.393] (**) Option "xkb_model" "pc105"
* 251 [ 28.393] (**) Option "xkb_layout" "de"
* 252 [ 28.393] (II) event3 - LOGITECH USB Keyboard Consumer Control: is tagged by udev as: Keyboard
* 253 [ 28.394] (II) event3 - LOGITECH USB Keyboard Consumer Control: device is a keyboard
* 254 [ 28.394] (II) config/udev: Adding input device LOGITECH USB Keyboard System Control (/dev/input/event4)
* 255 [ 28.394] (**) LOGITECH USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
* 256 [ 28.394] (II) Using input driver 'libinput' for 'LOGITECH USB Keyboard System Control'
* 257 [ 28.395] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 29 paused 0
* 258 [ 28.395] (**) LOGITECH USB Keyboard System Control: always reports core events
* 259 [ 28.395] (**) Option "Device" "/dev/input/event4"
* 260 [ 28.395] (**) Option "_source" "server/udev"
* 261 [ 28.395] (II) event4 - LOGITECH USB Keyboard System Control: is tagged by udev as: Keyboard
* 262 [ 28.395] (II) event4 - LOGITECH USB Keyboard System Control: device is a keyboard
* 263 [ 28.395] (II) event4 - LOGITECH USB Keyboard System Control: device removed
* 264 [ 28.395] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:046D:C301.0002/input/input7/event4"
* 265 [ 28.395] (II) XINPUT: Adding extended input device "LOGITECH USB Keyboard System Control" (type: KEYBOARD, id 11)
* 266 [ 28.395] (**) Option "xkb_model" "pc105"
* 267 [ 28.396] (**) Option "xkb_layout" "de"
* 268 [ 28.396] (II) event4 - LOGITECH USB Keyboard System Control: is tagged by udev as: Keyboard
* 269 [ 28.396] (II) event4 - LOGITECH USB Keyboard System Control: device is a keyboard
* 270 [ 28.397] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
* 271 [ 28.397] (II) No input driver specified, ignoring this device.
* 272 [ 28.397] (II) This device may have been added with another device file.
* 273 [ 28.397] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
* 274 [ 28.397] (II) No input driver specified, ignoring this device.
* 275 [ 28.397] (II) This device may have been added with another device file.
* 276 [ 28.397] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event9)
* 277 [ 28.397] (II) No input driver specified, ignoring this device.
* 278 [ 28.397] (II) This device may have been added with another device file.
* 279 [ 28.398] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
* 280 [ 28.398] (II) No input driver specified, ignoring this device.
* 281 [ 28.398] (II) This device may have been added with another device file.
* 282 [ 28.400] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6)
* 283 [ 28.400] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
* 284 [ 28.400] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
* 285 [ 28.400] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 30 paused 0
* 286 [ 28.400] (**) HP WMI hotkeys: always reports core events
* 287 [ 28.400] (**) Option "Device" "/dev/input/event6"
* 288 [ 28.400] (**) Option "_source" "server/udev"
* 289 [ 28.401] (II) event6 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
* 290 [ 28.401] (II) event6 - HP WMI hotkeys: device is a keyboard
* 291 [ 28.401] (II) event6 - HP WMI hotkeys: device removed
* 292 [ 28.401] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event6"
* 293 [ 28.401] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 12)
* 294 [ 28.401] (**) Option "xkb_model" "pc105"
* 295 [ 28.401] (**) Option "xkb_layout" "de"
* 296 [ 28.401] (II) event6 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
* 297 [ 28.401] (II) event6 - HP WMI hotkeys: device is a keyboard
* 298 [ 46.256] (**) Option "fd" "22"
* 299 [ 46.257] (II) event1 - Power Button: device removed
* 300 [ 46.257] (**) Option "fd" "25"
* 301 [ 46.257] (II) event0 - Power Button: device removed
* 302 [ 46.257] (**) Option "fd" "26"
* 303 [ 46.257] (II) event5 - Chicony Chicony wired mouse: device removed
* 304 [ 46.257] (**) Option "fd" "27"
* 305 [ 46.257] (II) event2 - LOGITECH USB Keyboard: device removed
* 306 [ 46.257] (**) Option "fd" "28"
* 307 [ 46.257] (II) event3 - LOGITECH USB Keyboard Consumer Control: device removed
* 308 [ 46.257] (**) Option "fd" "29"
* 309 [ 46.257] (II) event4 - LOGITECH USB Keyboard System Control: device removed
* 310 [ 46.257] (**) Option "fd" "30"
* 311 [ 46.257] (II) event6 - HP WMI hotkeys: device removed
* 312 [ 46.259] (II) systemd-logind: got pause for 13:70
* 313 [ 46.259] (II) systemd-logind: got pause for 13:69
* 314 [ 46.259] (II) systemd-logind: got pause for 13:65
* 315 [ 46.259] (II) systemd-logind: got pause for 13:67
* 316 [ 46.259] (II) systemd-logind: got pause for 13:66
* 317 [ 46.259] (II) systemd-logind: got pause for 13:68
* 318 [ 46.259] (II) systemd-logind: got pause for 13:64
* hp-desktop@hpdesktop-HP-ProDesk-600-G1-TWR:/var/log$
*
* * hp-desktop@hpdesktop-HP-ProDesk-600-G1-TWR:~/.local/share/xorg$ nl Xorg.0.log
* 1 [ 25.761] (--) Log file renamed from "/home/hp-desktop/.local/share/xorg/Xorg.pid-1455.log" to "/home/hp-desktop/.local/share/xorg/Xorg.0.log"
* 2 [ 25.762]
* 3 X.Org X Server 1.20.1
* 4 X Protocol Version 11, Revision 0
* 5 [ 25.762] Build Operating System: Linux 4.4.0-140-generic x86_64 Ubuntu
* 6 [ 25.762] Current Operating System: Linux hpdesktop-HP-ProDesk-600-G1-TWR 4.18.0-17-generic #18~18.04.1-Ubuntu SMP Fri Mar 15 15:27:12 UTC 2019 x86_64
* 7 [ 25.762] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-17-generic root=UUID=22356704-b047-4a8a-ae35-1b495ee40071 ro quiet splash vt.handoff=1
* 8 [ 25.762] Build Date: 27 November 2018 05:27:12PM
* 9 [ 25.762] xorg-server-hwe-18.04 2:1.20.1-3ubuntu2.1~18.04.1 (For technical support please see http://www.ubuntu.com/support)
* 10 [ 25.762] Current version of pixman: 0.34.0
* 11 [ 25.762] Before reporting problems, check http://wiki.x.org
* 12 to make sure that you have the latest version.
* 13 [ 25.762] Markers: (--) probed, (**) from config file, (==) default setting,
* 14 (++) from command line, (!!) notice, (II) informational,
* 15 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
* 16 [ 25.762] (==) Log file: "/home/hp-desktop/.local/share/xorg/Xorg.0.log", Time: Sun Apr 14 05:43:13 2019
* 17 [ 25.765] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
* 18 [ 25.766] (==) No Layout section. Using the first Screen section.
* 19 [ 25.766] (==) No screen section available. Using defaults.
* 20 [ 25.766] (**) |-->Screen "Default Screen Section" (0)
* 21 [ 25.766] (**) | |-->Monitor "<default monitor>"
* 22 [ 25.767] (==) No monitor specified for screen "Default Screen Section".
* 23 Using a default monitor configuration.
* 24 [ 25.767] (==) Automatically adding devices
* 25 [ 25.767] (==) Automatically enabling devices
* 26 [ 25.767] (==) Automatically adding GPU devices
* 27 [ 25.767] (==) Automatically binding GPU devices
* 28 [ 25.767] (==) Max clients allowed: 256, resource mask: 0x1fffff
* 29 [ 25.767] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
* 30 [ 25.767] Entry deleted from font path.
* 31 [ 25.767] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
* 32 [ 25.767] Entry deleted from font path.
* 33 [ 25.767] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
* 34 [ 25.767] Entry deleted from font path.
* 35 [ 25.767] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
* 36 [ 25.767] Entry deleted from font path.
* 37 [ 25.767] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
* 38 [ 25.767] Entry deleted from font path.
* 39 [ 25.767] (==) FontPath set to:
* 40 /usr/share/fonts/X11/misc,
* 41 /usr/share/fonts/X11/Type1,
* 42 built-ins
* 43 [ 25.767] (==) ModulePath set to "/usr/lib/xorg/modules"
* 44 [ 25.767] (II) The server relies on udev to provide the list of input devices.
* 45 If no devices become available, reconfigure udev or disable AutoAddDevices.
* 46 [ 25.767] (II) Loader magic: 0x55b6d9264020
* 47 [ 25.767] (II) Module ABI versions:
* 48 [ 25.767] X.Org ANSI C Emulation: 0.4
* 49 [ 25.767] X.Org Video Driver: 24.0
* 50 [ 25.767] X.Org XInput driver : 24.1
* 51 [ 25.767] X.Org Server Extension : 10.0
* 52 [ 25.768] (++) using VT number 2
*
* 53 [ 25.769] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32
* 54 [ 25.770] (II) xfree86: Adding drm device (/dev/dri/card0)
* 55 [ 25.770] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
* 56 [ 25.771] (--) PCI:*(0@0:2:0) 8086:0412:103c:18e7 rev 6, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
* 57 [ 25.771] (II) LoadModule: "glx"
* 58 [ 25.772] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
* 59 [ 25.774] (II) Module glx: vendor="X.Org Foundation"
* 60 [ 25.774] compiled for 1.20.1, module version = 1.0.0
* 61 [ 25.774] ABI class: X.Org Server Extension, version 10.0
* 62 [ 25.774] (==) Matched modesetting as autoconfigured driver 0
* 63 [ 25.774] (==) Matched fbdev as autoconfigured driver 1
* 64 [ 25.774] (==) Matched vesa as autoconfigured driver 2
* 65 [ 25.774] (==) Assigned the driver to the xf86ConfigLayout
* 66 [ 25.774] (II) LoadModule: "modesetting"
* 67 [ 25.774] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
* 68 [ 25.776] (II) Module modesetting: vendor="X.Org Foundation"
* 69 [ 25.776] compiled for 1.20.1, module version = 1.20.1
* 70 [ 25.776] Module class: X.Org Video Driver
* 71 [ 25.776] ABI class: X.Org Video Driver, version 24.0
* 72 [ 25.776] (II) LoadModule: "fbdev"
* 73 [ 25.776] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
* 74 [ 25.776] (II) Module fbdev: vendor="X.Org Foundation"
* 75 [ 25.776] compiled for 1.20.1, module version = 0.5.0
* 76 [ 25.776] Module class: X.Org Video Driver
* 77 [ 25.776] ABI class: X.Org Video Driver, version 24.0
* 78 [ 25.776] (II) LoadModule: "vesa"
* 79 [ 25.776] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
* 80 [ 25.777] (II) Module vesa: vendor="X.Org Foundation"
* 81 [ 25.777] compiled for 1.20.1, module version = 2.4.0
* 82 [ 25.777] Module class: X.Org Video Driver
* 83 [ 25.777] ABI class: X.Org Video Driver, version 24.0
* 84 [ 25.777] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
* 85 [ 25.777] (II) FBDEV: driver for framebuffer: fbdev
* 86 [ 25.777] (II) VESA: driver for VESA chipsets: vesa
* 87 [ 25.777] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
* 88 [ 25.777] (II) modeset(0): using drv /dev/dri/card0
* 89 [ 25.777] (WW) Falling back to old probe method for fbdev
* 90 [ 25.777] (II) Loading sub module "fbdevhw"
* 91 [ 25.777] (II) LoadModule: "fbdevhw"
* 92 [ 25.777] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
* 93 [ 25.777] (II) Module fbdevhw: vendor="X.Org Foundation"
* 94 [ 25.777] compiled for 1.20.1, module version = 0.0.2
* 95 [ 25.777] ABI class: X.Org Video Driver, version 24.0
* 96 [ 25.777] (EE) open /dev/fb0: Permission denied
* 97 [ 25.777] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
* 98 [ 25.777] (II) modeset(0): Creating default Display subsection in Screen section
* 99 "Default Screen Section" for depth/fbbpp 24/32
* 100 [ 25.777] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
* 101 [ 25.777] (==) modeset(0): RGB weight 888
* 102 [ 25.777] (==) modeset(0): Default visual is TrueColor
* 103 [ 25.777] (II) Loading sub module "glamoregl"
* 104 [ 25.777] (II) LoadModule: "glamoregl"
* 105 [ 25.777] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
* 106 [ 25.780] (II) Module glamoregl: vendor="X.Org Foundation"
* 107 [ 25.780] compiled for 1.20.1, module version = 1.0.1
* 108 [ 25.780] ABI class: X.Org ANSI C Emulation, version 0.4
* 109 [ 25.821] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) Haswell Desktop
* 110 [ 25.821] (II) modeset(0): glamor initialized
* 111 [ 25.836] (II) modeset(0): Output VGA-1 has no monitor section
* 112 [ 25.836] (II) modeset(0): Output DP-1 has no monitor section
* 113 [ 25.837] (II) modeset(0): Output HDMI-1 has no monitor section
* 114 [ 25.837] (II) modeset(0): Output DP-2 has no monitor section
* 115 [ 25.842] (II) modeset(0): Output HDMI-2 has no monitor section
* 116 [ 25.861] (II) modeset(0): EDID for output VGA-1
* 117 [ 25.862] (II) modeset(0): Manufacturer: ACR Model: 152 Serial#: 2492474650
* 118 [ 25.862] (II) modeset(0): Year: 2009 Week: 49
* 119 [ 25.862] (II) modeset(0): EDID Version: 1.3
* 120 [ 25.862] (II) modeset(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
* 121 [ 25.862] (II) modeset(0): Sync: Separate
* 122 [ 25.862] (II) modeset(0): Max Image Size [cm]: horiz.: 48 vert.: 27
* 123 [ 25.862] (II) modeset(0): Gamma: 2.20
* 124 [ 25.862] (II) modeset(0): DPMS capabilities: StandBy Suspend; RGB/Color Display
* 125 [ 25.862] (II) modeset(0): First detailed timing is preferred mode
* 126 [ 25.862] (II) modeset(0): redX: 0.648 redY: 0.339 greenX: 0.282 greenY: 0.603
* 127 [ 25.862] (II) modeset(0): blueX: 0.143 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
* 128 [ 25.862] (II) modeset(0): Supported established timings:
* 129 [ 25.862] (II) modeset(0): 720x400@70Hz
* 130 [ 25.862] (II) modeset(0): 640x480@60Hz
* 131 [ 25.862] (II) modeset(0): 640x480@67Hz
* 132 [ 25.862] (II) modeset(0): 640x480@72Hz
* 133 [ 25.862] (II) modeset(0): 640x480@75Hz
* 134 [ 25.862] (II) modeset(0): 800x600@56Hz
* 135 [ 25.862] (II) modeset(0): 800x600@60Hz
* 136 [ 25.862] (II) modeset(0): 800x600@72Hz
* 137 [ 25.862] (II) modeset(0): 800x600@75Hz
* 138 [ 25.862] (II) modeset(0): 832x624@75Hz
* 139 [ 25.862] (II) modeset(0): 1024x768@60Hz
* 140 [ 25.862] (II) modeset(0): 1024x768@70Hz
* 141 [ 25.862] (II) modeset(0): 1024x768@75Hz
* 142 [ 25.862] (II) modeset(0): 1280x1024@75Hz
* 143 [ 25.862] (II) modeset(0): 1152x864@75Hz
* 144 [ 25.862] (II) modeset(0): Manufacturer's mask: 0
* 145 [ 25.862] (II) modeset(0): Supported standard timings:
* 146 [ 25.862] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
* 147 [ 25.862] (II) modeset(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
* 148 [ 25.862] (II) modeset(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
* 149 [ 25.862] (II) modeset(0): #3: hsize: 1280 vsize 720 refresh: 60 vid: 49281
* 150 [ 25.862] (II) modeset(0): #4: hsize: 1280 vsize 800 refresh: 60 vid: 129
* 151 [ 25.862] (II) modeset(0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149
* 152 [ 25.862] (II) modeset(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
* 153 [ 25.862] (II) modeset(0): #7: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
* 154 [ 25.862] (II) modeset(0): Supported detailed timing:
* 155 [ 25.862] (II) modeset(0): clock: 148.5 MHz Image Size: 477 x 268 mm
* 156 [ 25.862] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
* 157 [ 25.862] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
* 158 [ 25.862] (II) modeset(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
* 159 [ 25.863] (II) modeset(0): Monitor name: P225HQL
* 160 [ 25.863] (II) modeset(0): Serial No: LLD0D0038514
* 161 [ 25.863] (II) modeset(0): EDID (in hex):
* 162 [ 25.863] (II) modeset(0): 00ffffffffffff00047252011a259094
* 163 [ 25.863] (II) modeset(0): 3113010368301b78ca3585a656489a24
* 164 [ 25.863] (II) modeset(0): 125054bfef80714f8140818081c08100
* 165 [ 25.863] (II) modeset(0): 9500b300d1c0023a801871382d40582c
* 166 [ 25.863] (II) modeset(0): 4500dd0c1100001a000000fd00384c1f
* 167 [ 25.863] (II) modeset(0): 5311000a202020202020000000fc0050
* 168 [ 25.863] (II) modeset(0): 32323548514c0a0a0a0a0a0a000000ff
* 169 [ 25.863] (II) modeset(0): 004c4c443044303033383531340a0087
* 170 [ 25.863] (II) modeset(0): Printing probed modes for output VGA-1
* 171 [ 25.863] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync -vsync (67.5 kHz eP)
* 172 [ 25.863] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
* 173 [ 25.863] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
* 174 [ 25.863] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
* 175 [ 25.863] (II) modeset(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
* 176 [ 25.863] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
* 177 [ 25.863] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
* 178 [ 25.863] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
* 179 [ 25.863] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
* 180 [ 25.863] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
* 181 [ 25.863] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
* 182 [ 25.863] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
* 183 [ 25.863] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
* 184 [ 25.863] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
* 185 [ 25.863] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
* 186 [ 25.863] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
* 187 [ 25.863] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
* 188 [ 25.863] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
* 189 [ 25.863] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
* 190 [ 25.863] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
* 191 [ 25.863] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
* 192 [ 25.863] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
* 193 [ 25.864] (II) modeset(0): EDID for output DP-1
* 194 [ 25.865] (II) modeset(0): EDID for output HDMI-1
* 195 [ 25.865] (II) modeset(0): EDID for output DP-2
* 196 [ 25.870] (II) modeset(0): EDID for output HDMI-2
* 197 [ 25.870] (II) modeset(0): Output VGA-1 connected
* 198 [ 25.870] (II) modeset(0): Output DP-1 disconnected
* 199 [ 25.870] (II) modeset(0): Output HDMI-1 disconnected
* 200 [ 25.870] (II) modeset(0): Output DP-2 disconnected
* 201 [ 25.870] (II) modeset(0): Output HDMI-2 disconnected
* 202 [ 25.870] (II) modeset(0): Using exact sizes for initial modes
* 203 [ 25.870] (II) modeset(0): Output VGA-1 using initial mode 1920x1080 +0+0
* 204 [ 25.870] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
* 205 [ 25.870] (==) modeset(0): DPI set to (96, 96)
* 206 [ 25.870] (II) Loading sub module "fb"
* 207 [ 25.870] (II) LoadModule: "fb"
* 208 [ 25.870] (II) Loading /usr/lib/xorg/modules/libfb.so
* 209 [ 25.871] (II) Module fb: vendor="X.Org Foundation"
* 210 [ 25.871] compiled for 1.20.1, module version = 1.0.0
* 211 [ 25.871] ABI class: X.Org ANSI C Emulation, version 0.4
* 212 [ 25.871] (II) UnloadModule: "fbdev"
* 213 [ 25.871] (II) Unloading fbdev
* 214 [ 25.871] (II) UnloadSubModule: "fbdevhw"
* 215 [ 25.871] (II) Unloading fbdevhw
* 216 [ 25.871] (II) UnloadModule: "vesa"
* 217 [ 25.871] (II) Unloading vesa
* 218 [ 25.976] (==) modeset(0): Backing store enabled
* 219 [ 25.976] (==) modeset(0): Silken mouse enabled
* 220 [ 25.980] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
* 221 [ 25.980] (==) modeset(0): DPMS enabled
* 222 [ 25.981] (II) modeset(0): [DRI2] Setup complete
* 223 [ 25.981] (II) modeset(0): [DRI2] DRI driver: i965
* 224 [ 25.981] (II) modeset(0): [DRI2] VDPAU driver: i965
* 225 [ 25.981] (II) Initializing extension Generic Event Extension
* 226 [ 25.981] (II) Initializing extension SHAPE
* 227 [ 25.982] (II) Initializing extension MIT-SHM
* 228 [ 25.982] (II) Initializing extension XInputExtension
* 229 [ 25.983] (II) Initializing extension XTEST
* 230 [ 25.983] (II) Initializing extension BIG-REQUESTS
* 231 [ 25.984] (II) Initializing extension SYNC
* 232 [ 25.984] (II) Initializing extension XKEYBOARD
* 233 [ 25.984] (II) Initializing extension XC-MISC
* 234 [ 25.985] (II) Initializing extension SECURITY
* 235 [ 25.985] (II) Initializing extension XFIXES
* 236 [ 25.985] (II) Initializing extension RENDER
* 237 [ 25.985] (II) Initializing extension RANDR
* 238 [ 25.986] (II) Initializing extension COMPOSITE
* 239 [ 25.986] (II) Initializing extension DAMAGE
* 240 [ 25.987] (II) Initializing extension MIT-SCREEN-SAVER
* 241 [ 25.987] (II) Initializing extension DOUBLE-BUFFER
* 242 [ 25.987] (II) Initializing extension RECORD
* 243 [ 25.988] (II) Initializing extension DPMS
* 244 [ 25.988] (II) Initializing extension Present
* 245 [ 25.988] (II) Initializing extension DRI3
* 246 [ 25.989] (II) Initializing extension X-Resource
* 247 [ 25.989] (II) Initializing extension XVideo
* 248 [ 25.989] (II) Initializing extension XVideo-MotionCompensation
* 249 [ 25.989] (II) Initializing extension SELinux
* 250 [ 25.989] (II) SELinux: Disabled on system
* 251 [ 25.989] (II) Initializing extension GLX
* 252 [ 25.994] (II) AIGLX: Loaded and initialized i965
* 253 [ 25.994] (II) GLX: Initialized DRI2 GL provider for screen 0
* 254 [ 25.994] (II) Initializing extension XFree86-VidModeExtension
* 255 [ 25.994] (II) Initializing extension XFree86-DGA
* 256 [ 25.994] (II) Initializing extension XFree86-DRI
* 257 [ 25.994] (II) Initializing extension DRI2
* 258 [ 25.995] (II) modeset(0): Damage tracking initialized
* 259 [ 25.995] (II) modeset(0): Setting screen physical size to 508 x 285
* 260 [ 26.037] (II) config/udev: Adding input device Power Button (/dev/input/event1)
* 261 [ 26.037] (**) Power Button: Applying InputClass "libinput keyboard catchall"
* 262 [ 26.037] (II) LoadModule: "libinput"
* 263 [ 26.037] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
* 264 [ 26.038] (II) Module libinput: vendor="X.Org Foundation"
* 265 [ 26.038] compiled for 1.20.1, module version = 0.28.1
* 266 [ 26.038] Module class: X.Org XInput Driver
* 267 [ 26.038] ABI class: X.Org XInput driver, version 24.1
* 268 [ 26.038] (II) Using input driver 'libinput' for 'Power Button'
* 269 [ 26.039] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 21 paused 0
* 270 [ 26.039] (**) Power Button: always reports core events
* 271 [ 26.039] (**) Option "Device" "/dev/input/event1"
* 272 [ 26.039] (**) Option "_source" "server/udev"
* 273 [ 26.040] (II) event1 - Power Button: is tagged by udev as: Keyboard
* 274 [ 26.040] (II) event1 - Power Button: device is a keyboard
* 275 [ 26.040] (II) event1 - Power Button: device removed
* 276 [ 26.040] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
* 277 [ 26.040] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
* 278 [ 26.040] (**) Option "xkb_model" "pc105"
* 279 [ 26.040] (**) Option "xkb_layout" "de"
* 280 [ 26.059] (II) event1 - Power Button: is tagged by udev as: Keyboard
* 281 [ 26.059] (II) event1 - Power Button: device is a keyboard
* 282 [ 26.060] (II) config/udev: Adding input device Power Button (/dev/input/event0)
* 283 [ 26.060] (**) Power Button: Applying InputClass "libinput keyboard catchall"
* 284 [ 26.060] (II) Using input driver 'libinput' for 'Power Button'
* 285 [ 26.060] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 24 paused 0
* 286 [ 26.060] (**) Power Button: always reports core events
* 287 [ 26.060] (**) Option "Device" "/dev/input/event0"
* 288 [ 26.060] (**) Option "_source" "server/udev"
* 289 [ 26.061] (II) event0 - Power Button: is tagged by udev as: Keyboard
* 290 [ 26.061] (II) event0 - Power Button: device is a keyboard
* 291 [ 26.061] (II) event0 - Power Button: device removed
* 292 [ 26.061] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
* 293 [ 26.061] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
* 294 [ 26.061] (**) Option "xkb_model" "pc105"
* 295 [ 26.061] (**) Option "xkb_layout" "de"
* 296 [ 26.061] (II) event0 - Power Button: is tagged by udev as: Keyboard
* 297 [ 26.061] (II) event0 - Power Button: device is a keyboard
* 298 [ 26.062] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=10 (/dev/input/event7)
* 299 [ 26.062] (II) No input driver specified, ignoring this device.
* 300 [ 26.062] (II) This device may have been added with another device file.
* 301 [ 26.062] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event3)
* 302 [ 26.062] (II) No input driver specified, ignoring this device.
* 303 [ 26.062] (II) This device may have been added with another device file.
* 304 [ 26.062] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event4)
* 305 [ 26.062] (II) No input driver specified, ignoring this device.
* 306 [ 26.062] (II) This device may have been added with another device file.
* 307 [ 26.063] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event5)
* 308 [ 26.063] (II) No input driver specified, ignoring this device.
* 309 [ 26.063] (II) This device may have been added with another device file.
* 310 [ 26.063] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=9 (/dev/input/event6)
* 311 [ 26.063] (II) No input driver specified, ignoring this device.
* 312 [ 26.063] (II) This device may have been added with another device file.
* 313 [ 26.063] (II) config/udev: Adding input device Chicony Chicony wired mouse (/dev/input/event15)
* 314 [ 26.063] (**) Chicony Chicony wired mouse: Applying InputClass "libinput pointer catchall"
* 315 [ 26.063] (II) Using input driver 'libinput' for 'Chicony Chicony wired mouse'
* 316 [ 26.120] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 25 paused 0
* 317 [ 26.120] (**) Chicony Chicony wired mouse: always reports core events
* 318 [ 26.120] (**) Option "Device" "/dev/input/event15"
* 319 [ 26.120] (**) Option "_source" "server/udev"
* 320 [ 26.121] (II) event15 - Chicony Chicony wired mouse: is tagged by udev as: Mouse
* 321 [ 26.121] (II) event15 - Chicony Chicony wired mouse: device is a pointer
* 322 [ 26.121] (II) event15 - Chicony Chicony wired mouse: device removed
* 323 [ 26.121] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12.1/3-12.1:1.0/0003:04F2:0718.0003/input/input18/event15"
* 324 [ 26.121] (II) XINPUT: Adding extended input device "Chicony Chicony wired mouse" (type: MOUSE, id 8)
* 325 [ 26.122] (**) Option "AccelerationScheme" "none"
* 326 [ 26.122] (**) Chicony Chicony wired mouse: (accel) selected scheme none/0
* 327 [ 26.122] (**) Chicony Chicony wired mouse: (accel) acceleration factor: 2.000
* 328 [ 26.122] (**) Chicony Chicony wired mouse: (accel) acceleration threshold: 4
* 329 [ 26.122] (II) event15 - Chicony Chicony wired mouse: is tagged by udev as: Mouse
* 330 [ 26.123] (II) event15 - Chicony Chicony wired mouse: device is a pointer
* 331 [ 26.123] (II) config/udev: Adding input device Chicony Chicony wired mouse (/dev/input/mouse0)
* 332 [ 26.123] (II) No input driver specified, ignoring this device.
* 333 [ 26.123] (II) This device may have been added with another device file.
* 334 [ 26.125] (II) config/udev: Adding input device LOGITECH USB Keyboard (/dev/input/event12)
* 335 [ 26.125] (**) LOGITECH USB Keyboard: Applying InputClass "libinput keyboard catchall"
* 336 [ 26.125] (II) Using input driver 'libinput' for 'LOGITECH USB Keyboard'
* 337 [ 26.127] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 26 paused 0
* 338 [ 26.127] (**) LOGITECH USB Keyboard: always reports core events
* 339 [ 26.127] (**) Option "Device" "/dev/input/event12"
* 340 [ 26.127] (**) Option "_source" "server/udev"
* 341 [ 26.128] (II) event12 - LOGITECH USB Keyboard: is tagged by udev as: Keyboard
* 342 [ 26.128] (II) event12 - LOGITECH USB Keyboard: device is a keyboard
* 343 [ 26.128] (II) event12 - LOGITECH USB Keyboard: device removed
* 344 [ 26.128] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:046D:C301.0001/input/input15/event12"
* 345 [ 26.128] (II) XINPUT: Adding extended input device "LOGITECH USB Keyboard" (type: KEYBOARD, id 9)
* 346 [ 26.128] (**) Option "xkb_model" "pc105"
* 347 [ 26.128] (**) Option "xkb_layout" "de"
* 348 [ 26.129] (II) event12 - LOGITECH USB Keyboard: is tagged by udev as: Keyboard
* 349 [ 26.129] (II) event12 - LOGITECH USB Keyboard: device is a keyboard
* 350 [ 26.130] (II) config/udev: Adding input device LOGITECH USB Keyboard Consumer Control (/dev/input/event13)
* 351 [ 26.130] (**) LOGITECH USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
* 352 [ 26.130] (II) Using input driver 'libinput' for 'LOGITECH USB Keyboard Consumer Control'
* 353 [ 26.131] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 27 paused 0
* 354 [ 26.131] (**) LOGITECH USB Keyboard Consumer Control: always reports core events
* 355 [ 26.131] (**) Option "Device" "/dev/input/event13"
* 356 [ 26.131] (**) Option "_source" "server/udev"
* 357 [ 26.131] (II) event13 - LOGITECH USB Keyboard Consumer Control: is tagged by udev as: Keyboard
* 358 [ 26.131] (II) event13 - LOGITECH USB Keyboard Consumer Control: device is a keyboard
* 359 [ 26.131] (II) event13 - LOGITECH USB Keyboard Consumer Control: device removed
* 360 [ 26.131] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:046D:C301.0002/input/input16/event13"
* 361 [ 26.131] (II) XINPUT: Adding extended input device "LOGITECH USB Keyboard Consumer Control" (type: KEYBOARD, id 10)
* 362 [ 26.131] (**) Option "xkb_model" "pc105"
* 363 [ 26.131] (**) Option "xkb_layout" "de"
* 364 [ 26.132] (II) event13 - LOGITECH USB Keyboard Consumer Control: is tagged by udev as: Keyboard
* 365 [ 26.132] (II) event13 - LOGITECH USB Keyboard Consumer Control: device is a keyboard
* 366 [ 26.132] (II) config/udev: Adding input device LOGITECH USB Keyboard System Control (/dev/input/event14)
* 367 [ 26.132] (**) LOGITECH USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
* 368 [ 26.132] (II) Using input driver 'libinput' for 'LOGITECH USB Keyboard System Control'
* 369 [ 26.133] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 28 paused 0
* 370 [ 26.133] (**) LOGITECH USB Keyboard System Control: always reports core events
* 371 [ 26.133] (**) Option "Device" "/dev/input/event14"
* 372 [ 26.133] (**) Option "_source" "server/udev"
* 373 [ 26.133] (II) event14 - LOGITECH USB Keyboard System Control: is tagged by udev as: Keyboard
* 374 [ 26.133] (II) event14 - LOGITECH USB Keyboard System Control: device is a keyboard
* 375 [ 26.133] (II) event14 - LOGITECH USB Keyboard System Control: device removed
* 376 [ 26.134] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:046D:C301.0002/input/input17/event14"
* 377 [ 26.134] (II) XINPUT: Adding extended input device "LOGITECH USB Keyboard System Control" (type: KEYBOARD, id 11)
* 378 [ 26.134] (**) Option "xkb_model" "pc105"
* 379 [ 26.134] (**) Option "xkb_layout" "de"
* 380 [ 26.134] (II) event14 - LOGITECH USB Keyboard System Control: is tagged by udev as: Keyboard
* 381 [ 26.134] (II) event14 - LOGITECH USB Keyboard System Control: device is a keyboard
* 382 [ 26.134] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
* 383 [ 26.134] (II) No input driver specified, ignoring this device.
* 384 [ 26.134] (II) This device may have been added with another device file.
* 385 [ 26.135] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event9)
* 386 [ 26.135] (II) No input driver specified, ignoring this device.
* 387 [ 26.135] (II) This device may have been added with another device file.
* 388 [ 26.135] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event10)
* 389 [ 26.135] (II) No input driver specified, ignoring this device.
* 390 [ 26.135] (II) This device may have been added with another device file.
* 391 [ 26.135] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event11)
* 392 [ 26.135] (II) No input driver specified, ignoring this device.
* 393 [ 26.135] (II) This device may have been added with another device file.
* 394 [ 26.137] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event2)
* 395 [ 26.137] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
* 396 [ 26.137] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
* 397 [ 26.138] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 29 paused 0
* 398 [ 26.138] (**) HP WMI hotkeys: always reports core events
* 399 [ 26.138] (**) Option "Device" "/dev/input/event2"
* 400 [ 26.138] (**) Option "_source" "server/udev"
* 401 [ 26.138] (II) event2 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
* 402 [ 26.138] (II) event2 - HP WMI hotkeys: device is a keyboard
* 403 [ 26.138] (II) event2 - HP WMI hotkeys: device removed
* 404 [ 26.138] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event2"
* 405 [ 26.138] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 12)
* 406 [ 26.138] (**) Option "xkb_model" "pc105"
* 407 [ 26.138] (**) Option "xkb_layout" "de"
* 408 [ 26.139] (II) event2 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
* 409 [ 26.139] (II) event2 - HP WMI hotkeys: device is a keyboard
* 410 [ 26.582] (II) modeset(0): EDID vendor "ACR", prod id 338
* 411 [ 26.582] (II) modeset(0): Using EDID range info for horizontal sync
* 412 [ 26.582] (II) modeset(0): Using EDID range info for vertical refresh
* 413 [ 26.582] (II) modeset(0): Printing DDC gathered Modelines:
* 414 [ 26.582] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync -vsync (67.5 kHz eP)
* 415 [ 26.582] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
* 416 [ 26.582] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
* 417 [ 26.582] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
* 418 [ 26.582] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
* 419 [ 26.582] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
* 420 [ 26.582] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
* 421 [ 26.582] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
* 422 [ 26.582] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
* 423 [ 26.582] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
* 424 [ 26.582] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
* 425 [ 26.582] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
* 426 [ 26.582] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
* 427 [ 26.582] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
* 428 [ 26.582] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
* 429 [ 26.583] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
* 430 [ 26.583] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
* 431 [ 26.583] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
* 432 [ 26.583] (II) modeset(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
* 433 [ 26.583] (II) modeset(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
* 434 [ 26.583] (II) modeset(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
* 435 [ 26.583] (II) modeset(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
* 436 [ 6108.684] (II) modeset(0): EDID vendor "ACR", prod id 338
* 437 [ 6108.700] (II) modeset(0): Using hsync ranges from config file
* 438 [ 6108.700] (II) modeset(0): Using vrefresh ranges from config file
* 439 [ 6108.700] (II) modeset(0): Printing DDC gathered Modelines:
* 440 [ 6108.700] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync -vsync (67.5 kHz eP)
* 441 [ 6108.700] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
* 442 [ 6108.700] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
* 443 [ 6108.700] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
* 444 [ 6108.700] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
* 445 [ 6108.700] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
* 446 [ 6108.700] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
* 447 [ 6108.700] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
* 448 [ 6108.700] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
* 449 [ 6108.700] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
* 450 [ 6108.700] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
* 451 [ 6108.700] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
* 452 [ 6108.700] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
* 453 [ 6108.700] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
* 454 [ 6108.700] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
* 455 [ 6108.700] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
* 456 [ 6108.700] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
* 457 [ 6108.700] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
* 458 [ 6108.700] (II) modeset(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
* 459 [ 6108.700] (II) modeset(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
* 460 [ 6108.700] (II) modeset(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
* 461 [ 6108.700] (II) modeset(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
* 462 [ 6269.379] (II) modeset(0): EDID vendor "ACR", prod id 338
* 463 [ 6269.380] (II) modeset(0): Using hsync ranges from config file
* 464 [ 6269.380] (II) modeset(0): Using vrefresh ranges from config file
* 465 [ 6269.380] (II) modeset(0): Printing DDC gathered Modelines:
* 466 [ 6269.380] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync -vsync (67.5 kHz eP)
* 467 [ 6269.380] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
* 468 [ 6269.380] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
* 469 [ 6269.380] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
* 470 [ 6269.380] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
* 471 [ 6269.380] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
* 472 [ 6269.380] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
* 473 [ 6269.380] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
* 474 [ 6269.380] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
* 475 [ 6269.380] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
* 476 [ 6269.380] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
* 477 [ 6269.380] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
* 478 [ 6269.380] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
* 479 [ 6269.380] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
* 480 [ 6269.380] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
* 481 [ 6269.380] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
* 482 [ 6269.380] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
* 483 [ 6269.380] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
* 484 [ 6269.380] (II) modeset(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
* 485 [ 6269.380] (II) modeset(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
* 486 [ 6269.380] (II) modeset(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
* 487 [ 6269.380] (II) modeset(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
* 488 [ 6289.290] (II) modeset(0): EDID vendor "ACR", prod id 338
* 489 [ 6289.290] (II) modeset(0): Using hsync ranges from config file
* 490 [ 6289.290] (II) modeset(0): Using vrefresh ranges from config file
* 491 [ 6289.290] (II) modeset(0): Printing DDC gathered Modelines:
* 492 [ 6289.290] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync -vsync (67.5 kHz eP)
* 493 [ 6289.290] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
* 494 [ 6289.290] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
* 495 [ 6289.290] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
* 496 [ 6289.290] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
* 497 [ 6289.290] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
* 498 [ 6289.290] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
* 499 [ 6289.290] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
* 500 [ 6289.290] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
* 501 [ 6289.290] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
* 502 [ 6289.290] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
* 503 [ 6289.290] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
* 504 [ 6289.290] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
* 505 [ 6289.290] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
* 506 [ 6289.290] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
* 507 [ 6289.290] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
* 508 [ 6289.290] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
* 509 [ 6289.290] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
* 510 [ 6289.290] (II) modeset(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
* 511 [ 6289.290] (II) modeset(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
* 512 [ 6289.290] (II) modeset(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
* 513 [ 6289.290] (II) modeset(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
* 514 [ 14378.118] (II) modeset(0): EDID vendor "ACR", prod id 338
* 515 [ 14378.118] (II) modeset(0): Using hsync ranges from config file
* 516 [ 14378.118] (II) modeset(0): Using vrefresh ranges from config file
* 517 [ 14378.118] (II) modeset(0): Printing DDC gathered Modelines:
* 518 [ 14378.118] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync -vsync (67.5 kHz eP)
* 519 [ 14378.118] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
* 520 [ 14378.118] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
* 521 [ 14378.118] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
* 522 [ 14378.118] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
* 523 [ 14378.118] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
* 524 [ 14378.118] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
* 525 [ 14378.118] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
* 526 [ 14378.118] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
* 527 [ 14378.118] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
* 528 [ 14378.118] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
* 529 [ 14378.118] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
* 530 [ 14378.118] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
* 531 [ 14378.118] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
* 532 [ 14378.118] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
* 533 [ 14378.118] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
* 534 [ 14378.118] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
* 535 [ 14378.118] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
* 536 [ 14378.118] (II) modeset(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
* 537 [ 14378.118] (II) modeset(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
* 538 [ 14378.118] (II) modeset(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
* 539 [ 14378.118] (II) modeset(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
* 540 [ 14378.321] (--) modeset(0): HDMI max TMDS frequency 300000KHz
* 541 [ 14378.339] (II) modeset(0): Allocate new frame buffer 3840x1080 stride
* 542 [ 14378.589] (II) modeset(0): EDID vendor "ACR", prod id 338
* 543 [ 14378.589] (II) modeset(0): Using hsync ranges from config file
* 544 [ 14378.589] (II) modeset(0): Using vrefresh ranges from config file
* 545 [ 14378.589] (II) modeset(0): Printing DDC gathered Modelines:
* 546 [ 14378.589] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync -vsync (67.5 kHz eP)
* 547 [ 14378.589] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
* 548 [ 14378.589] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
* 549 [ 14378.589] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
* 550 [ 14378.589] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
* 551 [ 14378.589] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
* 552 [ 14378.589] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
* 553 [ 14378.589] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
* 554 [ 14378.589] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
* 555 [ 14378.589] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
* 556 [ 14378.589] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
* 557 [ 14378.589] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
* 558 [ 14378.589] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
* 559 [ 14378.589] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
* 560 [ 14378.589] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
* 561 [ 14378.589] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
* 562 [ 14378.589] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
* 563 [ 14378.589] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
* 564 [ 14378.589] (II) modeset(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
* 565 [ 14378.589] (II) modeset(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
* 566 [ 14378.589] (II) modeset(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
* 567 [ 14378.589] (II) modeset(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
* 568 [ 14378.793] (--) modeset(0): HDMI max TMDS frequency 300000KHz
* 569 [ 15280.380] (**) Option "fd" "21"
* 570 [ 15280.380] (II) event1 - Power Button: device removed
* 571 [ 15280.380] (**) Option "fd" "24"
* 572 [ 15280.380] (II) event0 - Power Button: device removed
* 573 [ 15280.380] (**) Option "fd" "25"
* 574 [ 15280.380] (II) event15 - Chicony Chicony wired mouse: device removed
* 575 [ 15280.380] (**) Option "fd" "26"
* 576 [ 15280.380] (II) event12 - LOGITECH USB Keyboard: device removed
* 577 [ 15280.380] (**) Option "fd" "27"
* 578 [ 15280.380] (II) event13 - LOGITECH USB Keyboard Consumer Control: device removed
* 579 [ 15280.380] (**) Option "fd" "28"
* 580 [ 15280.380] (II) event14 - LOGITECH USB Keyboard System Control: device removed
* 581 [ 15280.380] (**) Option "fd" "29"
* 582 [ 15280.380] (II) event2 - HP WMI hotkeys: device removed
* 583 [ 15280.400] (II) UnloadModule: "libinput"
* 584 [ 15280.400] (II) systemd-logind: releasing fd for 13:66
* 585 [ 15280.496] (II) UnloadModule: "libinput"
* 586 [ 15280.496] (II) systemd-logind: releasing fd for 13:78
* 587 [ 15280.516] (II) UnloadModule: "libinput"
* 588 [ 15280.516] (II) systemd-logind: releasing fd for 13:77
* 589 [ 15280.516] (II) UnloadModule: "libinput"
* 590 [ 15280.516] (II) systemd-logind: releasing fd for 13:76
* 591 [ 15280.516] (II) UnloadModule: "libinput"
* 592 [ 15280.516] (II) systemd-logind: releasing fd for 13:79
* 593 [ 15280.517] (II) UnloadModule: "libinput"
* 594 [ 15280.517] (II) systemd-logind: releasing fd for 13:64
* 595 [ 15280.517] (II) UnloadModule: "libinput"
* 596 [ 15280.517] (II) systemd-logind: releasing fd for 13:65
* 597 [ 15280.531] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
* 598 [ 15280.531] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
* 599 [ 15280.531] (WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
* 600 [ 15280.865] (II) Server terminated successfully (0). Closing log file.
* hp-desktop@hpdesktop-HP-ProDesk-600-G1-TWR:~/.local/share/xorg$
*
|
Berlin_1946
Supporter, Wikiteam
(Themenstarter)
Anmeldungsdatum: 18. September 2009
Beiträge: 8678
|
Hallo, danke für die Antwort. Aber tut es denn wirklich Not, dass du das Bildsignal mit VGA so vergewaltigst?
Der hpdesktop-HP-ProDesk-600-G1-TW hat bei mir nur diesen Anschluss noch frei. Der 2. Anschluss geht über den HDMI Adapter zum TV. Im Live- System läuft ja alles und der allseits beliebte Satz "bei Win... auch". 😢 Nachtrag: Dein Hinweis auf die Display- Anschlüsse haben mich experimentieren lassen. im Aus-Zustand den VGA- Monitor abgeklemmt über den "HDMI" (TV)- Anschluss gebootet "Bildschirm gespiegelt" unter Systemeinstellung aktiviert VGA- angeschlossen und die Darstellung ist o.k.
Vllt ist es möglich diese Erkenntnis umzusetzen. Mit meinem Halbwissen rate ich mal, das ist das Delta zum Live- System und auch zu Windows10
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Moin,der Treiber i915.ko wird nicht geladen Berlin_1946 schrieb: hp-desktop@hpdesktop-HP-ProDesk-600-G1-TWR:~$ lspci -nnk | grep -A3 "\[03..\]:"00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06)
Subsystem: Hewlett-Packard Company Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [103c:18e7]
Kernel modules: i915
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
hp-desktop@hpdesktop-HP-ProDesk-600-G1-TWR: der gleich Treiben wird im Live- System benutzt ubuntu@ubuntu:~$ lspci -nnk| grep -i VGA -A2
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06)
Subsystem: Hewlett-Packard Company Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [103c:18e7]
Kernel driver in use: i915
ubuntu@ubuntu:~$
Abfrage wenn richtig stephan@stephan-Desktop:~$ lspci -nnk | grep -A3 "\[03..\]:"
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV710 [Radeon HD 4350/4550] [1002:954f]
Subsystem: PC Partner Limited / Sapphire Technology RV710 [Radeon HD 4350/4550] [174b:0e13]
Kernel driver in use: radeon
Kernel modules: radeon
stephan@stephan-Desktop:~$ Nachsehen locate intel_drv locate i915 | grep .ko Gruß Stephan
|
Berlin_1946
Supporter, Wikiteam
(Themenstarter)
Anmeldungsdatum: 18. September 2009
Beiträge: 8678
|
Hallo Stephan, die Ausgabe der 2 Befehle.
hp-desktop@hpdesktop-HP-ProDesk-600-G1-TWR:~$ locate intel_drv
/usr/lib/xorg/modules/drivers/intel_drv.so
hp-desktop@hpdesktop-HP-ProDesk-600-G1-TWR:~$ locate i915 | grep .ko
/lib/modules/4.18.0-15-generic/kernel/drivers/gpu/drm/i915/i915.ko
/lib/modules/4.18.0-15-generic/kernel/drivers/gpu/drm/i915/gvt/kvmgt.ko
/lib/modules/4.18.0-17-generic/kernel/drivers/gpu/drm/i915/i915.ko
/lib/modules/4.18.0-17-generic/kernel/drivers/gpu/drm/i915/gvt/kvmgt.ko
hp-desktop@hpdesktop-HP-ProDesk-600-G1-TWR:~$
Hallo Letalis_Sonus, Ja, alles im Recovery Modus sonst sehe ich ja nur die Hintergrundfarbe und komme nur über dem R- Modus zu einer Ausgabe oder über den TV- Trick (siehe Nachtrag im Post).
|
Berlin_1946
Supporter, Wikiteam
(Themenstarter)
Anmeldungsdatum: 18. September 2009
Beiträge: 8678
|
Hallo in die Runde, ich habe ermitteln können, dass der Anmeldebildschirm auf dem HDMI- Ausgang ausgegeben wird und der VGA- Ausgang das Untergrundbild anzeigt. Ist der am HDMI- Ausgang angeschlossene TV stromlos oder das Kabel abgeklemmt, dann bootet das System im gewünschte Modus (Auflösung) und das Bild erscheint auf dem VGA- Anschluss. Das Delta zwischen den Live-System und der Installation ist, dass im Live- System die
und im installierten System die
steht. Eine Änderung im installierten System auf "Bildschirm verketten", wird beim erneuten Booten "Bildschirm spiegeln" überschrieben. Siehe Anhänge. Wie kann ich die Einstellung im installierten System dauerhaft auf "Bildschirm verketten (mit VGA als Primärer Bildschirm)" einstellen?
- Bilder
|