ubuntuusers.de

Hola, ich habe mir einen HP Deskjet 3070A gekauft und die Installation als Drucker und das drucken waren kein Problem. Jetzt wollte ich mit dem Baby scannen aber simply scan findet keinen scanner....... kann mir jemand helfen? Danke im voraus....

Moin Moin,

sudo hp-setup

wurde durchgeführt?

Gruß

Hallo Jakobus

Da du nicht antwortest, war die Antwort von Tuemmler vielleicht nicht klar verständlich für dich. In solchen Fällen sollst und darfst du gerne nachfragen.

Also.. Tuemmler fragt, ob du den angegebenen Befehl schon ausgeführt hast. Befehle führt man in sogenannten Terminals (auch "Bash" oder "Console" genannt) aus. Mit der Tastenkombination Strg-Alt-t öffnest du in Ubuntu ein Terminal-Fenster. Dort kannst du dann den obigen Befehlt mal eingeben. Nach der Eingabe des Befehlt wird er dich einmal nach deinem Passwort fragen. Eingeben und Enter drücken.. danach geht es weiter.

Viel Erfolg

Gruß, slfonx

Hola, und ich dachte das wäre höhere Kunst.... Diesen Befehl habe ich direkt beim Anschließen des Druckers ausgeführt und soweit hat ja auch alles geklappt, nur leider nicht das scannen... aber natürlich ein dickes sorry, dass ich mich nicht gemeldet habe auf die Antwort..... bin nur leider immer noch nicht viel schlauer, Grüße...

Ich habe dasselbe Problem. Ich kann problemlos drucken, nur das Scannen funktioniert nicht. Der Drucker wurde automatisch erkannt. Hier die Ausgabe von "hp-check -t":

ewald@ewald-desktop:~$ hp-check -t

HP Linux Imaging and Printing System (ver. 3.12.2)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2011-14 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball        
(.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP.         
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc)
or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run.          
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases
(both compile- and run-time dependencies).                                                                     

Saving output in log file: hp-check.log

Initializing. Please wait...
 
---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux ewald-desktop 3.2.0-24-generic #38-Ubuntu SMP Tue May 1 16:21:07 UTC 2012 i686 i686 i386 GNU/Linux

Distribution:
ubuntu 12.04

Checking Python version...
OK, version 2.7.3 installed

Checking PyQt 4.x version...
OK, version 4.9.1 installed.

Checking for CUPS...
Status: scheduler is running
Version: 1.5.3
error_log is set to level: warn

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 1.0.0


------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.

Checking for dependency: CUPS image - CUPS image development files...
OK, found.

Checking for dependency: DBus - Message bus system...
OK, found.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
OK, found.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: libusb - USB library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.


----------------------
| HPLIP INSTALLATION |
----------------------


Currently installed HPLIP version...
HPLIP 3.12.2 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.12.2

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.12.2
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no


Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables. 

[plugin]
installed=0
eula=0



Current contents of '~/.hplip/hplip.conf' file:
[settings]
systray_visible = 0
systray_messages = 0

[last_used]
device_uri = "hp:/usb/Deskjet_3070_B611_series?serial=CN1A84382605MQ"
printer_name = Deskjet-3070-B611-series
working_dir = .

[commands]
scan = /usr/bin/simple-scan %SANE_URI%

[refresh]
rate = 30
enable = false
type = 1

[polling]
enable = false
interval = 5
device_list = 

[fax]
voice_phone = 
email_address = 

[installation]
date_time = 11.06.2012 14:09:51
version = 3.12.2



--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI                                    Model                      
  --------------------------------------------  ---------------------------
  hp:/usb/Deskjet_3070_B611_series?serial=CN1A  HP Deskjet 3070 B611 series
  84382605MQ                                                               

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

 
Deskjet_3070_B611
-----------------
Type: Printer
Device URI: hp:/usb/Deskjet_3070_B611_series?serial=CN1A84382605MQ
PPD: /etc/cups/ppd/Deskjet_3070_B611.ppd
PPD Description: HP Deskjet 3070 b611 Series, hpcups 3.12.2
Printer status: printer Deskjet_3070_B611 is idle.  enabled since Mo 11 Jun 2012 13:44:25 CEST
Communication status: Good


----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...
device `hpaio:/usb/Deskjet_3070_B611_series?serial=CN1A84382605MQ' is a Hewlett-Packard Deskjet_3070_B611_series all-in-one


---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.


 
-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0xa211 at 001:006: 
    Device URI: hp:/usb/Deskjet_3070_B611_series?serial=CN1A84382605MQ
    Device node: /dev/bus/usb/001/006
    Mode: 0664
getfacl: Entferne f?hrende '/' von absoluten Pfadnamen
# file: dev/bus/usb/001/006
# owner: root
# group: lp
user::rw-
user:ewald:rw-
group::rw-
mask::rw-
other::r--



---------------
| USER GROUPS |
---------------

ewald adm dialout cdrom plugdev lpadmin admin sambashare

error: User needs to be member of group 'lp' to enable print, scan & fax.
User member of group 'lpadmin'.

-----------
| SUMMARY |
-----------

error: 6 errors and/or warnings.

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html


Done.
ewald@ewald-desktop:~$ 

Offenbar fehlen einige Abhängigkeiten, nur welche?

Moin Moin,

seba schrieb:

Ich habe dasselbe Problem. Ich kann problemlos drucken, nur das Scannen funktioniert nicht. Der Drucker wurde automatisch erkannt.

HPLIP ......bzw. mit dem eigenen Drucker nicht funktionieren.....

Hier findest Du den passenden Treiber http://hplipopensource.com/hplip-web/install_wizard/index.html und so wird er installiert http://hplipopensource.com/hplip-web/install/install/index.html .

Du wirst einige Fragen beantworten müssen, der Rest geht automatisch. Aufpassen, wohin Du den Treiber installierst, wenn es unter Downloads ist, musst Du im Terminal mit cd ..... dorthin wechseln.

Gruß

Danke Tuemmler, es hat jetzt doch noch anders funktioniert. Ich habe den Benutzer der Gruppe "lp" hinzufügen müssen. Jetzt kann ich problemlos scannen. Hier steht es etwas genauer:

https://answers.launchpad.net/hplip/+question/186446 (Comment #9)

1.) Add the user to lp group.

sudo usermod -a -G lp $USER.

⇒ Delete the existing print queues in "system-config-printer" control window.

⇒ Run command "hp-setup -g" with device connected to the USB port and check if the device is detected and configured. if not, provide us the hp-setup -g command's debug message output coming terminal here. This is for us to work on the issue.

Servus,

ich habe jetzt fast drei Monate gestöbert und noch immer nicht das richtige gefunden.

Als ich den großen Test hp check -t durchführte und mit diesem hier verglich, waren nirgendwo Fehler aufgelistet. Alle anderen Angaben entsprachen dem Test auf dieser Seite und auch als Systemdrucker war der HP eingerichtet.

Leider ist es noch immer nicht möglich zu scannen. Sobald ich scannen will erscheint ein Fenster mit der Mitteilung "Konnte Scanner nicht starten ungültiges Argument", obwohl bei XScane 0.998 Deskjet_3070_B6 in der Kopfzeile steht.

Die von meiner Frau praktizierte Lösung mit immer wieder an und abstecken, des HP, und zu hoffen, dass man nach einigen Versuchen doch wieder scannen kann ist wohl auch nicht die richtige Lösung.

Danke für Eure Mühen, im Voraus

mundione

mundidu@mundidu-laptop:~$ hp-check -t

HP Linux Imaging and Printing System (ver. 3.12.2)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2011-14 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.                                    
2. Run-time check mode (-r or --run): Use this mode to determine if a distro    
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
has the proper dependencies installed to successfully run.                      
3. Both compile- and run-time check mode (-b or --both) (Default): This mode    
will check both of the above cases (both compile- and run-time dependencies).   

Saving output in log file: hp-check.log

Initializing. Please wait...
 
---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux mundidu-laptop 3.2.0-38-generic #61-Ubuntu SMP Tue Feb 19 12:20:02 UTC 2013 i686 i686 i386 GNU/Linux

Distribution:
ubuntu 12.04

Checking Python version...
OK, version 2.7.3 installed

Checking PyQt 4.x version...
OK, version 4.9.1 installed.

Checking for CUPS...
Status: scheduler is running
Version: 1.5.3
error_log is set to level: warn

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 1.0.0


------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.

Checking for dependency: CUPS image - CUPS image development files...
OK, found.

Checking for dependency: DBus - Message bus system...
OK, found.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
OK, found.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
OK, found.

Checking for dependency: libusb - USB library...
OK, found.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
OK, found.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.


----------------------
| HPLIP INSTALLATION |
----------------------


Currently installed HPLIP version...
HPLIP 3.12.2 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.12.2

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.12.2
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no


Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1



Current contents of '~/.hplip/hplip.conf' file:
[upgrade]
notify_upgrade = true
pending_upgrade_time = 0
last_upgraded_time = 1358528943

[settings]
systray_visible = 0
systray_messages = 0

[last_used]
device_uri = "hp:/usb/Deskjet_3070_B611_series?serial=CN2386C0JW05MQ"
printer_name = 
working_dir = .

[commands]
scan = /usr/bin/xsane -V %SANE_URI%

[refresh]
rate = 30
enable = false
type = 1

[polling]
enable = false
interval = 5
device_list = 

[fax]
voice_phone = 
email_address = 

[installation]
date_time = 2013-02-27 22:43:28
version = 3.12.2



--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI                        Model                      
  --------------------------------  ---------------------------
  hp:/usb/Deskjet_3070_B611_series  HP Deskjet 3070 B611 series
  ?serial=CN2386C0JW05MQ                                       

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

 
Deskjet_3070_B611
-----------------
Type: Printer
Device URI: hp:/usb/Deskjet_3070_B611_series?serial=CN2386C0JW05MQ
PPD: /etc/cups/ppd/Deskjet_3070_B611.ppd
PPD Description: HP Deskjet 3070 b611 Series, hpcups 3.12.6
Printer status: printer Deskjet_3070_B611 is idle.  enabled since Mit 27 Feb 2013 21:21:44 CET
Communication status: Good


----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...
device `hpaio:/usb/Deskjet_3070_B611_series?serial=CN2386C0JW05MQ' is a Hewlett-Packard Deskjet_3070_B611_series all-in-one


---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.


 
-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0xa211 at 002:003: 
    Device URI: hp:/usb/Deskjet_3070_B611_series?serial=CN2386C0JW05MQ
    Device node: /dev/bus/usb/002/003
    Mode: 0664
getfacl: Entferne f?hrende '/' von absoluten Pfadnamen
# file: dev/bus/usb/002/003
# owner: root
# group: lp
user::rw-
user:mundidu:rw-
group::rw-
mask::rw-
other::r--



---------------
| USER GROUPS |
---------------

mundidu adm lp dialout fax cdrom floppy tape audio dip video plugdev fuse lpadmin netdev admin sambashare

User member of group 'lp'. Enables print/ scan/ fax.
User member of group 'lpadmin'.

-----------
| SUMMARY |
-----------

No errors or warnings.

Done.
mundidu@mundidu-laptop:~$ 

Heureka! Nach langem gestöber folgender lösungsweg:

Eine Fixe IP addresse vergeben und dann, wie unter folgendem link beschrieben https://help.ubuntu.com/community/HpAllInOne

hp-makeuri IP-ADDRESS

statt IP_ADDRESS natürlich die des Druckers einfügen 😛

gksudo gedit /etc/cups/printers.conf 

dort die 'socket' DeviceURI mit der HPaio uri ersetzen

reset durchführen

sudo /etc/init.d/cupsys restart 

wenns nicht klappt cupsys durch cups ersetzen.

Danach über den hp-setup den netzwerkdrucker über erweitert mit manueller eingabe der IP addresse des Druckers installieren

Hoffe das klappt 😉

Servus Nicomann,

vielen Dank, hätte mich mit meinem schwachen Englisch nie auf eine enlische Hilfeseite getraut. War jedoch, letztendlich doch zu verstehen. Hab die Anweisungen durchgeführt und es klappt.

Bis zu der Veränderung habe ich meiner Frau auf diese Art geholfen.

Beim durchsuchen der vorinstallierten Anwendungen bemerkte ich das nicht nur XSane, sondern auch SimpleScan, als Scanprogram auf Ubuntu 12.04 LTS zur Auswahl standen.. Als Mitfünfziger hatte ich nun die Idee eines der beiden zu entfernen und zu sehen was sich ergibt. Da XSane aus dem HP Manager nicht arbeitete, entfernte ich dieses. SimpleScan angeklickt und der Scanner arbeitete, Dateien ließen sich einfach abspeichern und den letzten Speicherplatz merkte es sich auch. Meine Frau war begeistert. Als es zum Drucken kam reichte diesmal ein Druckauftrag an den, sich selbst ausschaltenden, Drucker. Er schaltete sich selbst ein und sie konnte ohne Störung drucken.

Sollten mit der neuen Lösung wieder Probleme auftreten, werde ich die Scanprograme wieder tauschen, denn jetzt arbeitet wieder XScane.

Nochmals Dank an Nicomann

mundione