hesti-scumph
(Themenstarter)
Anmeldungsdatum: 21. April 2017
Beiträge: 198
Wohnort: Bodensee
|
Error
Failed to open device 'brother2:bus2;dev1':Invalid argument.
~$ xscanimage
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.27
[dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
[dll] sane_init/read_config: reading dll.d/hplip
[dll] add_backend: adding backend `hpaio'
[dll] sane_init/read_dlld: done.
[dll] sane_init/read_config: reading dll.conf
[dll] add_backend: adding backend `net'
[dll] add_backend: adding backend `brother2'
[dll] sane_get_devices
[dll] load: searching backend `brother2' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-brother2.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-brother2.so.1'
[dll] init: initializing backend `brother2'
[dll] init: backend `brother2' is version 1.0.1
[dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[dll] init: initializing backend `net'
[dll] init: backend `net' is version 1.0.27
[dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[dll] init: initializing backend `hpaio'
[dll] init: backend `hpaio' is version 1.0.0
[dll] sane_get_devices: found 1 devices
[dll] sane_open: trying to open `brother2:bus2;dev1'
(xscanimage:6726): IBUS-WARNING **: 20:41:59.482: Unable to connect to ibus: Verbindung ist gescheitert: Verbindungsaufbau abgelehnt
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `brother2's exit function
[dll] sane_exit: calling backend `net's exit function
[dll] sane_exit: calling backend `hpaio's exit function
[dll] sane_exit: finished
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Nun ja .. sane-find-scanner -v -v scanimage >~/Test.pnm Habe bald das Gefühl es endet wie "Teil1".
|
hesti-scumph
(Themenstarter)
Anmeldungsdatum: 21. April 2017
Beiträge: 198
Wohnort: Bodensee
|
Sch.... ~$ sane-find-scanner -v -v
This is sane-find-scanner from sane-backends 1.0.27
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
searching for SCSI scanners:
checking /dev/scanner... failed to open (Invalid argument)
checking /dev/sg0... failed to open (Invalid argument)
checking /dev/sg1... failed to open (Access to resource has been denied)
checking /dev/sg2... failed to open (Access to resource has been denied)
checking /dev/sg3... failed to open (Invalid argument)
checking /dev/sg4... failed to open (Invalid argument)
checking /dev/sg5... failed to open (Invalid argument)
checking /dev/sg6... failed to open (Invalid argument)
checking /dev/sg7... failed to open (Invalid argument)
checking /dev/sg8... failed to open (Invalid argument)
checking /dev/sg9... failed to open (Invalid argument)
checking /dev/sga... failed to open (Invalid argument)
checking /dev/sgb... failed to open (Invalid argument)
checking /dev/sgc... failed to open (Invalid argument)
checking /dev/sgd... failed to open (Invalid argument)
checking /dev/sge... failed to open (Invalid argument)
checking /dev/sgf... failed to open (Invalid argument)
checking /dev/sgg... failed to open (Invalid argument)
checking /dev/sgh... failed to open (Invalid argument)
checking /dev/sgi... failed to open (Invalid argument)
checking /dev/sgj... failed to open (Invalid argument)
checking /dev/sgk... failed to open (Invalid argument)
checking /dev/sgl... failed to open (Invalid argument)
checking /dev/sgm... failed to open (Invalid argument)
checking /dev/sgn... failed to open (Invalid argument)
checking /dev/sgo... failed to open (Invalid argument)
checking /dev/sgp... failed to open (Invalid argument)
checking /dev/sgq... failed to open (Invalid argument)
checking /dev/sgr... failed to open (Invalid argument)
checking /dev/sgs... failed to open (Invalid argument)
checking /dev/sgt... failed to open (Invalid argument)
checking /dev/sgu... failed to open (Invalid argument)
checking /dev/sgv... failed to open (Invalid argument)
checking /dev/sgw... failed to open (Invalid argument)
checking /dev/sgx... failed to open (Invalid argument)
checking /dev/sgy... failed to open (Invalid argument)
checking /dev/sgz... failed to open (Invalid argument)
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
searching for USB scanners:
checking /dev/usb/scanner... failed to open (Invalid argument)
checking /dev/usb/scanner0... failed to open (Invalid argument)
checking /dev/usb/scanner1... failed to open (Invalid argument)
checking /dev/usb/scanner2... failed to open (Invalid argument)
checking /dev/usb/scanner3... failed to open (Invalid argument)
checking /dev/usb/scanner4... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner7... failed to open (Invalid argument)
checking /dev/usb/scanner8... failed to open (Invalid argument)
checking /dev/usb/scanner9... failed to open (Invalid argument)
checking /dev/usb/scanner10... failed to open (Invalid argument)
checking /dev/usb/scanner11... failed to open (Invalid argument)
checking /dev/usb/scanner12... failed to open (Invalid argument)
checking /dev/usb/scanner13... failed to open (Invalid argument)
checking /dev/usb/scanner14... failed to open (Invalid argument)
checking /dev/usb/scanner15... failed to open (Invalid argument)
checking /dev/usbscanner... failed to open (Invalid argument)
checking /dev/usbscanner0... failed to open (Invalid argument)
checking /dev/usbscanner1... failed to open (Invalid argument)
checking /dev/usbscanner2... failed to open (Invalid argument)
checking /dev/usbscanner3... failed to open (Invalid argument)
checking /dev/usbscanner4... failed to open (Invalid argument)
checking /dev/usbscanner5... failed to open (Invalid argument)
checking /dev/usbscanner6... failed to open (Invalid argument)
checking /dev/usbscanner7... failed to open (Invalid argument)
checking /dev/usbscanner8... failed to open (Invalid argument)
checking /dev/usbscanner9... failed to open (Invalid argument)
checking /dev/usbscanner10... failed to open (Invalid argument)
checking /dev/usbscanner11... failed to open (Invalid argument)
checking /dev/usbscanner12... failed to open (Invalid argument)
checking /dev/usbscanner13... failed to open (Invalid argument)
checking /dev/usbscanner14... failed to open (Invalid argument)
checking /dev/usbscanner15... failed to open (Invalid argument)
trying libusb:
could not open USB device 0x8087/0x8000 at 002:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x8087/0x8008 at 001:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0003 at 004:001: Access denied (insufficient permissions)
could not open USB device 0x5986/0x055c at 003:004: Access denied (insufficient permissions)
could not open USB device 0x8087/0x07dc at 003:003: Access denied (insufficient permissions)
<device descriptor of 0x04f9/0x01d6 at 003:006>
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x04F9
idProduct 0x01D6
bcdDevice 1.00
iManufacturer 0 ()
iProduct 0 ()
iSerialNumber 3 (BROH8F665835)
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 85
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 192 (Self-powered)
MaxPower 2 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 7
bInterfaceSubClass 1
bInterfaceProtocol 2
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 (out 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 (in 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 16
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<interface 1>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255
bInterfaceSubClass 255
bInterfaceProtocol 255
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 (out 0x03)
bmAttributes 2 (bulk)
wMaxPacketSize 16
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 (in 0x04)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 2>
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 (in 0x05)
bmAttributes 3 (interrupt)
wMaxPacketSize 8
bInterval 100 ms
bRefresh 0
bSynchAddress 0
<interface 2>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8
bInterfaceSubClass 6
bInterfaceProtocol 80
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x08 (out 0x08)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x89 (in 0x09)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<trying to find out which USB chip is used>
could not claim USB device interface
found USB scanner (vendor=0x04f9, product=0x01d6) at libusb:003:006
could not open USB device 0x1d6b/0x0002 at 003:001: Access denied (insufficient permissions)
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
done
~$ scanimage >~/Test.pnm
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.27
[dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
[dll] sane_init/read_config: reading dll.d/hplip
[dll] add_backend: adding backend `hpaio'
[dll] sane_init/read_dlld: done.
[dll] sane_init/read_config: reading dll.conf
[dll] add_backend: adding backend `net'
[dll] add_backend: adding backend `brother2'
[dll] sane_get_devices
[dll] load: searching backend `brother2' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-brother2.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-brother2.so.1'
[dll] init: initializing backend `brother2'
[dll] init: backend `brother2' is version 1.0.1
[dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[dll] init: initializing backend `net'
[dll] init: backend `net' is version 1.0.27
[dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[dll] init: initializing backend `hpaio'
[dll] init: backend `hpaio' is version 1.0.0
[dll] sane_get_devices: found 1 devices
[dll] sane_open: trying to open `brother2:bus2;dev1'
scanimage: open of device brother2:bus2;dev1 failed: Invalid argument
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `brother2's exit function
[dll] sane_exit: calling backend `net's exit function
[dll] sane_exit: calling backend `hpaio's exit function
[dll] sane_exit: finished Test.pnm läßt sich nicht hochladen, weil's leer ist ☹
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Ist der Scanner angelaufen? scanimage -T
|
hesti-scumph
(Themenstarter)
Anmeldungsdatum: 21. April 2017
Beiträge: 198
Wohnort: Bodensee
|
Die Sau macht keinen Zucker 👿
~$ scanimage -T
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.27
[dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
[dll] sane_init/read_config: reading dll.d/hplip
[dll] add_backend: adding backend `hpaio'
[dll] sane_init/read_dlld: done.
[dll] sane_init/read_config: reading dll.conf
[dll] add_backend: adding backend `net'
[dll] add_backend: adding backend `brother2'
[dll] sane_get_devices
[dll] load: searching backend `brother2' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-brother2.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-brother2.so.1'
[dll] init: initializing backend `brother2'
[dll] init: backend `brother2' is version 1.0.1
[dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[dll] init: initializing backend `net'
[dll] init: backend `net' is version 1.0.27
[dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[dll] init: initializing backend `hpaio'
[dll] init: backend `hpaio' is version 1.0.0
[dll] sane_get_devices: found 1 devices
[dll] sane_open: trying to open `brother2:bus2;dev1'
scanimage: open of device brother2:bus2;dev1 failed: Invalid argument
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `brother2's exit function
[dll] sane_exit: calling backend `net's exit function
[dll] sane_exit: calling backend `hpaio's exit function
[dll] sane_exit: finished
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Wollen wir es mal über Wlan probieren? Wlan hat das Gerät ja 😇 Wie hattest du ihn am Anfang Installiert? Mit dem Install Script von Brother oder die einzelnen Pakete?
|
hesti-scumph
(Themenstarter)
Anmeldungsdatum: 21. April 2017
Beiträge: 198
Wohnort: Bodensee
|
Meines Wissens nach hat das Teil kein WLAN. Wie wär's über LAN?
Ich habe die einzelnen Pakete installiert und mich an https://wiki.ubuntuusers.de/Scanner/Brother/ orientiert.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Lan ist auch gut.Falls das Scheitert bleibt nur noch die Vollständige entfernung und Neuinstallation über ds Script. Teile mir die Lan ip für das Gerät mit 😉
|
hesti-scumph
(Themenstarter)
Anmeldungsdatum: 21. April 2017
Beiträge: 198
Wohnort: Bodensee
|
Sieht nicht so aus, als ob der LAN-fähig wäre. Habe bis jetzt nur einen TEL-Anschluß gefunden. Ich muß mal die Bedienungsanleitung raussuchen und studieren. Denke wir machen morgen weiter. Ab wann wär's Dir recht?
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Denke mal so ab 11 Uhr ☺ Gute Nacht.
|
hesti-scumph
(Themenstarter)
Anmeldungsdatum: 21. April 2017
Beiträge: 198
Wohnort: Bodensee
|
Ich melde mich um 11. Ebenfalls gute Nacht.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Wir Rudern mal zurück dpkg -l | grep -i "brscan\|Brother\|libusb*\|sane\|lib32ncurses*\|lib32z1\|csh" dpkg -l | egrep -v '^ii' systemctl --no-pager status cups*
|
hesti-scumph
(Themenstarter)
Anmeldungsdatum: 21. April 2017
Beiträge: 198
Wohnort: Bodensee
|
~$ dpkg -l | grep -i "brscan\|Brother\|libusb*\|sane\|lib32ncurses*\|lib32z1\|csh"
ii brother-udev-rule-type1 1.0.2 all Brother udev rule type 1
ii brscan-skey 0.2.4-1 amd64 Brother Linux scanner S-KEY tool
ii brscan2 0.2.5-1 amd64 Brother Scanner Driver
ii libcommon-sense-perl 3.74-2build2 amd64 module that implements some sane defaults for Perl programs
ii libgusb2:amd64 0.2.11-1 amd64 GLib wrapper around libusb1
ii libsane-common 1.0.27-1~experimental3ubuntu2 all API library for scanners -- documentation and support files
ii libsane-hpaio:amd64 3.17.10+repack0-5 amd64 HP SANE backend for multi-function peripherals
ii libsane1:amd64 1.0.27-1~experimental3ubuntu2 amd64 API library for scanners
ii libusageenvironment3:amd64 2018.02.18-1 amd64 multimedia RTSP streaming library (UsageEnvironment classes)
ii libusb-0.1-4:amd64 2:0.1.12-31 amd64 userspace USB programming library
ii libusb-1.0-0:amd64 2:1.0.21-2 amd64 userspace USB programming library
ii libusbmuxd4:amd64 1.1.0~git20171206.c724e70f-0.1 amd64 USB multiplexor daemon for iPhone and iPod Touch devices - library
ii mfc260ccupswrapper:i386 1.0.1-1 i386 Brother CUPS Inkjet Printer Definitions
ii mfc260clpr:i386 1.0.1-1 i386 Brother lpr Inkjet Printer Definitions
ii printer-driver-brlaser 4-1 amd64 printer driver for (some) Brother laser printers
ii printer-driver-ptouch 1.4.2-3 amd64 printer driver Brother P-touch label printers
ii sane 1.0.14-12build1 amd64 scanner graphical frontends
ii sane-utils 1.0.27-1~experimental3ubuntu2 amd64 API library for scanners -- utilities
ii xsane 0.999-5ubuntu2 amd64 featureful graphical frontend for SANE (Scanner Access Now Easy)
ii xsane-common 0.999-5ubuntu2 all xsane architecture independent files
~$ dpkg -l | egrep -v '^ii'
Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten
| Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/
Halb installiert/Trigger erWartet/Trigger anhängig
|/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: GROSS=schlecht)
||/ Name Version Architektur Beschreibung
+++-==========================================-============================================-============-===============================================================================
rc libfm-data 1.2.5-1ubuntu1 all file management support (common data)
rc libfm4:amd64 1.2.5-1ubuntu1 amd64 file management support (core library)
rc lxmenu-data 0.1.5-2 all LXDE freedesktop.org menu specification
~$ systemctl --no-pager status cups*
● cups.service - CUPS Scheduler
Loaded: loaded (/lib/systemd/system/cups.service; enabled; vendor preset: enabled)
Active: failed (Result: start-limit-hit) since Sat 2019-01-05 10:55:58 CET; 40min ago
Docs: man:cupsd(8)
Process: 933 ExecStart=/usr/sbin/cupsd -l (code=killed, signal=TERM)
Main PID: 933 (code=killed, signal=TERM)
Jan 05 10:55:58 SH2 systemd[1]: cups.service: Service hold-off time over, s…art.
Jan 05 10:55:58 SH2 systemd[1]: cups.service: Scheduled restart job, restar…t 5.
Jan 05 10:55:58 SH2 systemd[1]: Stopped CUPS Scheduler.
Jan 05 10:55:58 SH2 systemd[1]: cups.service: Start request repeated too qu…kly.
Jan 05 10:55:58 SH2 systemd[1]: cups.service: Failed with result 'start-lim…it'.
Jan 05 10:55:58 SH2 systemd[1]: Failed to start CUPS Scheduler.
● cups.socket - CUPS Scheduler
Loaded: loaded (/lib/systemd/system/cups.socket; enabled; vendor preset: enabled)
Active: failed (Result: start-limit-hit) since Sat 2019-01-05 10:55:58 CET; 40min ago
Listen: /run/cups/cups.sock (Stream)
Jan 05 10:55:58 SH2 systemd[1]: Closed CUPS Scheduler.
Jan 05 10:55:58 SH2 systemd[1]: Stopping CUPS Scheduler.
Jan 05 10:55:58 SH2 systemd[1]: Listening on CUPS Scheduler.
Jan 05 10:55:58 SH2 systemd[1]: Closed CUPS Scheduler.
Jan 05 10:55:58 SH2 systemd[1]: Stopping CUPS Scheduler.
Jan 05 10:55:58 SH2 systemd[1]: cups.socket: Start request repeated too quickly.
Jan 05 10:55:58 SH2 systemd[1]: cups.socket: Failed with result 'start-limi…it'.
Jan 05 10:55:58 SH2 systemd[1]: Failed to listen on CUPS Scheduler.
● cups.path - CUPS Scheduler
Loaded: loaded (/lib/systemd/system/cups.path; enabled; vendor preset: enabled)
Active: failed (Result: start-limit-hit) since Sat 2019-01-05 10:55:58 CET; 40min ago
Jan 05 10:55:58 SH2 systemd[1]: Stopped CUPS Scheduler.
Jan 05 10:55:58 SH2 systemd[1]: Stopping CUPS Scheduler.
Jan 05 10:55:58 SH2 systemd[1]: Started CUPS Scheduler.
Jan 05 10:55:58 SH2 systemd[1]: Stopped CUPS Scheduler.
Jan 05 10:55:58 SH2 systemd[1]: Stopping CUPS Scheduler.
Jan 05 10:55:58 SH2 systemd[1]: cups.path: Start request repeated too quickly.
Jan 05 10:55:58 SH2 systemd[1]: cups.path: Failed with result 'start-limit-hit'.
Jan 05 10:55:58 SH2 systemd[1]: Failed to start CUPS Scheduler.
Hint: Some lines were ellipsized, use -l to show in full.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Super 😕 Zuerst sudo apt purge brscan* brother-udev-rule* brscan-skey* mfc260ccupswrapper:i386 mfc260clpr:i386 Wenn keine Fehler sudo apt install lib32ncurses5 lib32z1 csh lpr Erst mal bis hier.
|
hesti-scumph
(Themenstarter)
Anmeldungsdatum: 21. April 2017
Beiträge: 198
Wohnort: Bodensee
|
~$ sudo apt purge brscan* brother-udev-rule* brscan-skey* mfc260ccupswrapper:i386 mfc260clpr:i386
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Hinweis: »brother-udev-rule-type1« wird für das Suchmuster »brother-udev-rule*« gewählt.
Hinweis: »brscan-skey« wird für das Suchmuster »brscan-skey*« gewählt.
E: Paket brscan2-0.2.5-1.amd64.deb kann nicht gefunden werden.
E: Mittels des Musters »brscan2-0.2.5-1.amd64.deb« konnte kein Paket gefunden werden.
E: Mittels regulärem Ausdruck »brscan2-0.2.5-1.amd64.deb« konnte kein Paket gefunden werden.
~$ sudo apt install lib32ncurses5 lib32z1 csh lpr
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Die folgenden zusätzlichen Pakete werden installiert:
lib32tinfo5
Vorgeschlagene Pakete:
magicfilter | apsfilter gs
Die folgenden Pakete werden ENTFERNT:
cups-bsd
Die folgenden NEUEN Pakete werden installiert:
csh lib32ncurses5 lib32tinfo5 lib32z1 lpr
0 aktualisiert, 5 neu installiert, 1 zu entfernen und 4 nicht aktualisiert.
Es müssen 572 kB an Archiven heruntergeladen werden.
Nach dieser Operation werden 1.522 kB Plattenplatz zusätzlich benutzt.
Möchten Sie fortfahren? [J/n] j
Holen:1 http://de.archive.ubuntu.com/ubuntu bionic/universe amd64 csh amd64 20110502-3 [243 kB]
Holen:2 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 lib32tinfo5 amd64 6.1-1ubuntu1.18.04 [79,1 kB]
Holen:3 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 lib32ncurses5 amd64 6.1-1ubuntu1.18.04 [100 kB]
Holen:4 http://de.archive.ubuntu.com/ubuntu bionic/main amd64 lib32z1 amd64 1:1.2.11.dfsg-0ubuntu2 [58,3 kB]
Holen:5 http://de.archive.ubuntu.com/ubuntu bionic/universe amd64 lpr amd64 1:2008.05.17.2 [91,9 kB]
Es wurden 572 kB in 0 s geholt (1.499 kB/s).
(Lese Datenbank ... 315767 Dateien und Verzeichnisse sind derzeit installiert.)
Entfernen von cups-bsd (2.2.7-1ubuntu2.2) ...
Vormals nicht ausgewähltes Paket csh wird gewählt.
(Lese Datenbank ... 315751 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../csh_20110502-3_amd64.deb ...
Entpacken von csh (20110502-3) ...
Vormals nicht ausgewähltes Paket lib32tinfo5 wird gewählt.
Vorbereitung zum Entpacken von .../lib32tinfo5_6.1-1ubuntu1.18.04_amd64.deb ...
Entpacken von lib32tinfo5 (6.1-1ubuntu1.18.04) ...
Vormals nicht ausgewähltes Paket lib32ncurses5 wird gewählt.
Vorbereitung zum Entpacken von .../lib32ncurses5_6.1-1ubuntu1.18.04_amd64.deb ...
Entpacken von lib32ncurses5 (6.1-1ubuntu1.18.04) ...
Vormals nicht ausgewähltes Paket lib32z1 wird gewählt.
Vorbereitung zum Entpacken von .../lib32z1_1%3a1.2.11.dfsg-0ubuntu2_amd64.deb ...
Entpacken von lib32z1 (1:1.2.11.dfsg-0ubuntu2) ...
Vormals nicht ausgewähltes Paket lpr wird gewählt.
Vorbereitung zum Entpacken von .../lpr_1%3a2008.05.17.2_amd64.deb ...
Entpacken von lpr (1:2008.05.17.2) ...
Trigger für ureadahead (0.100.0-20) werden verarbeitet ...
ureadahead will be reprofiled on next reboot
lib32tinfo5 (6.1-1ubuntu1.18.04) wird eingerichtet ...
lib32ncurses5 (6.1-1ubuntu1.18.04) wird eingerichtet ...
Trigger für libc-bin (2.27-3ubuntu1) werden verarbeitet ...
/sbin/ldconfig.real: /usr/lib/libbrcolm2.so.1 is not a symbolic link
Trigger für systemd (237-3ubuntu10.9) werden verarbeitet ...
Trigger für man-db (2.8.3-2ubuntu0.1) werden verarbeitet ...
lib32z1 (1:1.2.11.dfsg-0ubuntu2) wird eingerichtet ...
csh (20110502-3) wird eingerichtet ...
update-alternatives: /bin/bsd-csh wird verwendet, um /bin/csh (csh) im automatischen Modus bereitzustellen
lpr (1:2008.05.17.2) wird eingerichtet ...
Trigger für libc-bin (2.27-3ubuntu1) werden verarbeitet ...
/sbin/ldconfig.real: /usr/lib/libbrcolm2.so.1 is not a symbolic link
Trigger für systemd (237-3ubuntu10.9) werden verarbeitet ...
Trigger für ureadahead (0.100.0-20) werden verarbeitet ...
|