ii hplip 3.17.10+repack0-5 amd64 HP Linux Printing and Imaging System (HPLIP)
ii hplip-data 3.17.10+repack0-5 all HP Linux Printing and Imaging - data files
ii libhpmud0:amd64 3.17.10+repack0-5 amd64 HP Multi-Point Transport Driver (hpmud) run-time libraries
ii libsane-hpaio:amd64 3.17.10+repack0-5 amd64 HP SANE backend for multi-function peripherals
ii printer-driver-hpcups 3.17.10+repack0-5 amd64 HP Linux Printing and Imaging - CUPS Raster driver (hpcups)
ii printer-driver-pnm2ppa 1.13+nondbs-0ubuntu6 amd64 printer driver for HP-GDI printers
ii printer-driver-postscript-hp 3.17.10+repack0-5 all HP Printers PostScript Descriptions
ii printer-driver-pxljr 1.4+repack0-5 amd64 printer driver for HP Color LaserJet 35xx/36xx
und
Saving output in log file: /home/kathrin/hp-check.log
HP Linux Imaging and Printing System (ver. 3.17.10)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
\Gtk-Message: 19:27:10.431: Failed to load module "canberra-gtk-module"
warning: 12-18.04 version is not supported. Using 12-17.04 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 4.18.0-18-generic #19~18.04.1-Ubuntu SMP Fri Apr 5 10:22:13 UTC 2019 GNU/Linux
Host: kathrin-ThinkPad-T410
Proc: 4.18.0-18-generic #19~18.04.1-Ubuntu SMP Fri Apr 5 10:22:13 UTC 2019 GNU/Linux
Distribution: 12 18.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.17.10
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 12 distro 18.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.17.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.17.10
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 05/11/19 19:27:11
version = 3.17.10
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.26 OK -
Gtk-Message: 19:27:12.025: Failed to load module "canberra-gtk-module"
Gtk-Message: 19:27:12.058: Failed to load module "canberra-gtk-module"
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.27 OK -
error: dbus DBus - Message bus system REQUIRED - 1.12.2 MISSING 'DBUS may not be installed or not running'
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.19.4 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
------------------------
| General Dependencies |
------------------------
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
error: libpthread libpthread - POSIX threads library REQUIRED - b'2.27' MISSING 'libpthread needs to be installed'
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.0 MISSING 'libcrypto needs to be installed'
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.6.7 OK -
error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - MISSING 'python3-notify2 needs to be installed'
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.6 OK -
python3-xml Python XML libraries REQUIRED - 2.2.5 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.6.7 MISSING 'python3-devel needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.4.0 OK -
--------------
| COMPILEDEP |
--------------
error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
error: gcc gcc - GNU Project C and C++ Compiler REQUIRED - - MISSING 'gcc needs to be installed'
error: make make - GNU make utility to maintain groups of programs REQUIRED 3.0 - MISSING 'make needs to be installed'
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.17.10 OK -
hpmudext IO-Extension REQUIRED - 3.17.10 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.17.10 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.17.10 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `hpaio:/usb/HP_LaserJet_200_colorMFP_M276nw?serial=CNF8G3PGJK' is a Hewlett-Packard HP_LaserJet_200_colorMFP_M276nw all-in-one
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
------------------------------------------------------ -------------------------------
hp:/usb/HP_LaserJet_200_colorMFP_M276nw?serial=CNF8G3P HP LaserJet 200 colorMFP M276nw
GJK
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP-LaserJet-200-colorMFP-M276nw
-------------------------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_200_colorMFP_M276nw?serial=CNF8G3PGJK
PPD: /etc/cups/ppd/HP-LaserJet-200-colorMFP-M276nw.ppd
warning: Failed to read /etc/cups/ppd/HP-LaserJet-200-colorMFP-M276nw.ppd ppd file
PPD Description:
Printer status: Drucker HP-LaserJet-200-colorMFP-M276nw ist im Leerlauf. Aktiviert seit Sa 11 Mai 2019 17:45:49 CEST
error: Required plug-in status: Not installed
Communication status: Good
HP-LaserJet-200-colorMFP-M276nw-Fax-2
-------------------------------------
Type: Fax
Device URI: hpfax:/usb/HP_LaserJet_200_colorMFP_M276nw?serial=CNF8G3PGJK
PPD: /etc/cups/ppd/HP-LaserJet-200-colorMFP-M276nw-Fax-2.ppd
warning: Failed to read /etc/cups/ppd/HP-LaserJet-200-colorMFP-M276nw-Fax-2.ppd ppd file
PPD Description:
Printer status: Drucker HP-LaserJet-200-colorMFP-M276nw-Fax-2 ist im Leerlauf. Aktiviert seit Sa 11 Mai 2019 17:27:03 CEST
error: Required plug-in status: Not installed
Communication status: Good
--------------
| PERMISSION |
--------------
USB HP-LaserJet-200-colorMFP-M276nw Required - - OK Node:'/dev/bus/usb/002/009' Perm:' root lp rw- rw- rw- rw- r--'
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'libcups2' package is missing/incompatible
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libjpeg-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'build-essential' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp-mibs-downloader' package is missing/incompatible
error: 'openssl' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
error: 'libtool' package is missing/incompatible
error: 'libtool-bin' package is missing/incompatible
error: 'build-essential' package is missing/incompatible
error: 'build-essential' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'python3-notify2' package is missing/incompatible
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Plug-in Status
--------------
error: Plug-ins need to be installed
Total Errors: 19
Total Warnings: 0
Done.