hannes22
Anmeldungsdatum: 20. August 2009
Beiträge: 266
|
Guten tag, ich hab ganz neu ein gebrauchtes Thinkpad T520. SD Karte rein und es passiert nichts. Der Kartenleser wird wohl erkannt (lspci Zeile 19): 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20 | 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GF119M [Quadro NVS 4200M] (rev a1)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 34)
0d:00.0 System peripheral: Ricoh Co Ltd PCIe SDXC/MMC Host Controller (rev 08)
0d:00.3 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller (rev 04)
|
dmesg meldet nachdem eine Karte eingelegt wurde (natürlich verschiedene):
| [ 2253.254086] mmc0: Card is consuming too much power!
[ 2253.272338] mmc0: error -110 whilst initialising SD card
|
Was meint ihr, Notebook Hardwarefehler? Oder sollte ich noch etwas testen bevor ich den Händler anspreche? Danke Hannes
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
HI.Was ist das genau für eine SD? Nicht jeder Reader kann mit den "Modernen" schnellen Karten umgehen.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
http://kb-de.sandisk.com/app/answers/detail/a_id/8317/~/sd%2Fsdhc%2Fsdxc-spezifikationen-und-kompatibilit%C3%A4ten http://thinkwiki.de/T520 Das T520 ist das dritte 15-Zoll-Modell der Txxx-Serie, hergestellt von Februar 2011 bis Dezember 2012 Ich befürchte deine Karte ist zu "Schnell" Mal ne "Langsame" ausprobiert? Nachtrag:Hab ich jetzt erst gesehen 😳 Ricoh Co Ltd PCIe SDXC/MMC
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
|
hannes22
(Themenstarter)
Anmeldungsdatum: 20. August 2009
Beiträge: 266
|
Nein, die 2GB ist class 1 glaube ich, steht nichts drauf. Die 4 GB ist class 2. Langsamer/kleiner hab ich nicht. Ich würde deine Antwort lesen: es müsste gehen. Oder?
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Ja.SDXC ist abwärtskompatibel
|
scuba
Anmeldungsdatum: 7. März 2007
Beiträge: 966
Wohnort: Münchner Westen
|
Hai hannes22, vielleicht hilft das hier weiter: expresscard-reader-thinkpa.... Das war neulich ein Thema und soweit ich weiß, ist der T420 und der T520 abgesehen von Formfaktor ziemlich identisch. LG und Blubb SCUBA
|
hannes22
(Themenstarter)
Anmeldungsdatum: 20. August 2009
Beiträge: 266
|
Ich habe jetzt die tlp config geprüft, sie war so wie empfohlen und tlp somit aktiv. tlp stat:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215 | --- TLP 0.8 --------------------------------------------
+++ Configured Settings: /etc/default/tlp
TLP_ENABLE=1
TLP_DEFAULT_MODE=AC
DISK_IDLE_SECS_ON_AC=0
DISK_IDLE_SECS_ON_BAT=2
MAX_LOST_WORK_SECS_ON_AC=15
MAX_LOST_WORK_SECS_ON_BAT=60
SCHED_POWERSAVE_ON_AC=0
SCHED_POWERSAVE_ON_BAT=1
NMI_WATCHDOG=0
ENERGY_PERF_POLICY_ON_AC=performance
ENERGY_PERF_POLICY_ON_BAT=powersave
DISK_DEVICES="sda sdb"
DISK_APM_LEVEL_ON_AC="254 254"
DISK_APM_LEVEL_ON_BAT="128 128"
SATA_LINKPWR_ON_AC=max_performance
SATA_LINKPWR_ON_BAT=min_power
PCIE_ASPM_ON_AC=performance
PCIE_ASPM_ON_BAT=powersave
RADEON_POWER_PROFILE_ON_AC=high
RADEON_POWER_PROFILE_ON_BAT=low
RADEON_DPM_STATE_ON_AC=performance
RADEON_DPM_STATE_ON_BAT=battery
RADEON_DPM_PERF_LEVEL_ON_AC=auto
RADEON_DPM_PERF_LEVEL_ON_BAT=auto
WIFI_PWR_ON_AC=1
WIFI_PWR_ON_BAT=5
WOL_DISABLE=Y
SOUND_POWER_SAVE_ON_AC=0
SOUND_POWER_SAVE_ON_BAT=1
SOUND_POWER_SAVE_CONTROLLER=Y
BAY_POWEROFF_ON_BAT=0
BAY_DEVICE="sr0"
RUNTIME_PM_ON_AC=on
RUNTIME_PM_ON_BAT=auto
RUNTIME_PM_ALL=1
RUNTIME_PM_BLACKLIST="0d:00.0"
RUNTIME_PM_DRIVER_BLACKLIST="radeon nouveau"
USB_AUTOSUSPEND=1
USB_BLACKLIST_WWAN=1
RESTORE_DEVICE_STATE_ON_STARTUP=0
+++ System Info
System = LENOVO ThinkPad T520 4243VU8
BIOS = 8AET52WW (1.32 )
Release = Ubuntu 16.04.1 LTS
Kernel = 4.4.0-53-generic #74-Ubuntu SMP Fri Dec 2 15:59:10 UTC 2016 x86_64
/proc/cmdline = BOOT_IMAGE=/boot/vmlinuz-4.4.0-53-generic root=UUID=e6035851-4fca-485d-8ba6-137928f4065e ro quiet splash vt.handoff=7
Init system = systemd
+++ System Status
TLP power save = enabled
power source = AC
+++ Processor
CPU Model = Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz
/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver = intel_pstate
/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor = powersave
/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq = 800000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq = 3300000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_driver = intel_pstate
/sys/devices/system/cpu/cpu1/cpufreq/scaling_governor = powersave
/sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq = 800000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq = 3300000 [kHz]
/sys/devices/system/cpu/cpu2/cpufreq/scaling_driver = intel_pstate
/sys/devices/system/cpu/cpu2/cpufreq/scaling_governor = powersave
/sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq = 800000 [kHz]
/sys/devices/system/cpu/cpu2/cpufreq/scaling_max_freq = 3300000 [kHz]
/sys/devices/system/cpu/cpu3/cpufreq/scaling_driver = intel_pstate
/sys/devices/system/cpu/cpu3/cpufreq/scaling_governor = powersave
/sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq = 800000 [kHz]
/sys/devices/system/cpu/cpu3/cpufreq/scaling_max_freq = 3300000 [kHz]
/sys/devices/system/cpu/intel_pstate/min_perf_pct = 24
/sys/devices/system/cpu/intel_pstate/max_perf_pct = 100
/sys/devices/system/cpu/intel_pstate/no_turbo = 0
x86_energy_perf_policy: program for your kernel not installed.
/proc/sys/kernel/nmi_watchdog = 0
+++ Undervolting
PHC kernel not available.
+++ Temperatures
CPU temp = 42 [°C]
/proc/acpi/ibm/fan = 1988 [/min]
+++ File System
/proc/sys/vm/laptop_mode = 0
/proc/sys/vm/dirty_writeback_centisecs = 1500
/proc/sys/vm/dirty_expire_centisecs = 1500
/proc/sys/vm/dirty_ratio = 20
/proc/sys/vm/dirty_background_ratio = 10
/proc/sys/fs/xfs/age_buffer_centisecs = (not available)
/proc/sys/fs/xfs/xfssyncd_centisecs = (not available)
/proc/sys/fs/xfs/xfsbufd_centisecs = (not available)
+++ Storage Devices
/dev/sda:
Model = SanDisk SDSSDHP256G
Firmware = X2316RL
APM Level = 254
Status = active/idle
TRIM = supported
Scheduler = deadline
SMART info:
5 Reallocated_Sector_Ct = 0
9 Power_On_Hours = 2716 [h]
194 Temperature_Celsius = 37 (Min/Max 15/48) [°C]
+++ SATA Aggressive Link Power Management
/sys/class/scsi_host/host0/link_power_management_policy = max_performance
/sys/class/scsi_host/host1/link_power_management_policy = max_performance
/sys/class/scsi_host/host2/link_power_management_policy = max_performance
/sys/class/scsi_host/host3/link_power_management_policy = max_performance
/sys/class/scsi_host/host4/link_power_management_policy = max_performance
/sys/class/scsi_host/host5/link_power_management_policy = max_performance
+++ PCIe Active State Power Management
/sys/module/pcie_aspm/parameters/policy = default (using bios preferences)
+++ Intel Graphics
/sys/module/i915/parameters/powersave = (not available)
/sys/module/i915/parameters/enable_rc6 = 1 (enabled)
/sys/module/i915/parameters/enable_fbc = -1 (use per-chip default)
/sys/module/i915/parameters/lvds_downclock = (not available)
/sys/module/i915/parameters/semaphores = -1 (use per-chip default)
+++ Wireless
bluetooth = on
wifi = on
wwan = none (no device)
hci0(btusb) : not connected
wlp3s0(iwlwifi) : connected, power management = off
+++ Audio
/sys/module/snd_hda_intel/parameters/power_save = 0
/sys/module/snd_hda_intel/parameters/power_save_controller = N
+++ Docks and Device Bays
/sys/devices/platform/dock.0: battery_bay = no battery
/sys/devices/platform/dock.1: ata_bay = drive present
+++ Runtime Power Management
device classes = all
device blacklist = 0d:00.0
driver blacklist = radeon nouveau
/sys/bus/pci/devices/0000:00:00.0/power/control = on (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:00:01.0/power/control = on (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:02.0/power/control = on (0x030000, VGA compatible controller, i915)
/sys/bus/pci/devices/0000:00:16.0/power/control = on (0x078000, Communication controller, mei_me)
/sys/bus/pci/devices/0000:00:16.3/power/control = on (0x070002, Serial controller, serial)
/sys/bus/pci/devices/0000:00:19.0/power/control = on (0x020000, Ethernet controller, e1000e)
/sys/bus/pci/devices/0000:00:1a.0/power/control = on (0x0c0320, USB controller, ehci-pci)
/sys/bus/pci/devices/0000:00:1b.0/power/control = on (0x040300, Audio device, snd_hda_intel)
/sys/bus/pci/devices/0000:00:1c.0/power/control = on (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1c.1/power/control = on (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1c.3/power/control = on (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1c.4/power/control = on (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1d.0/power/control = on (0x0c0320, USB controller, ehci-pci)
/sys/bus/pci/devices/0000:00:1f.0/power/control = on (0x060100, ISA bridge, lpc_ich)
/sys/bus/pci/devices/0000:00:1f.2/power/control = on (0x010601, SATA controller, ahci)
/sys/bus/pci/devices/0000:00:1f.3/power/control = on (0x0c0500, SMBus, no driver)
/sys/bus/pci/devices/0000:01:00.0/power/control = auto (0x030000, VGA compatible controller, nouveau)
/sys/bus/pci/devices/0000:03:00.0/power/control = on (0x028000, Network controller, iwlwifi)
/sys/bus/pci/devices/0000:0d:00.0/power/control = on (0x088001, System peripheral, sdhci-pci)
/sys/bus/pci/devices/0000:0d:00.3/power/control = on (0x0c0010, FireWire (IEEE 1394), firewire_ohci)
+++ USB
autosuspend = enabled
device whitelist = (not configured)
device blacklist = (not configured)
wwan blacklist = enabled
Bus 002 Device 002 ID 8087:0024 control = auto, autosuspend_delay_ms = 0 -- Intel Corp. Integrated Rate Matching Hub (hub)
Bus 002 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub)
Bus 001 Device 003 ID 0a5c:217f control = auto, autosuspend_delay_ms = 2000 -- Broadcom Corp. BCM2045B (BDC-2.1) (btusb)
Bus 001 Device 002 ID 8087:0024 control = auto, autosuspend_delay_ms = 0 -- Intel Corp. Integrated Rate Matching Hub (hub)
Bus 001 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub)
+++ ThinkPad Extended Battery Functions
tp-smapi = active
tpacpi-bat = active
+++ ThinkPad Battery Status: BAT0 (Main / Internal)
/sys/devices/platform/smapi/BAT0/manufacturer = LGC
/sys/devices/platform/smapi/BAT0/model = 42T4757
/sys/devices/platform/smapi/BAT0/manufacture_date = 2015-12-14
/sys/devices/platform/smapi/BAT0/first_use_date = 2015-12-14
/sys/devices/platform/smapi/BAT0/cycle_count = 5
/sys/devices/platform/smapi/BAT0/design_capacity = 47520 [mWh]
/sys/devices/platform/smapi/BAT0/last_full_capacity = 45770 [mWh]
/sys/devices/platform/smapi/BAT0/remaining_capacity = 45770 [mWh]
/sys/devices/platform/smapi/BAT0/remaining_percent = 100 [%]
/sys/devices/platform/smapi/BAT0/remaining_running_time_now = not_discharging [min]
/sys/devices/platform/smapi/BAT0/remaining_charging_time = not_charging [min]
/sys/devices/platform/smapi/BAT0/power_now = 0 [mW]
/sys/devices/platform/smapi/BAT0/power_avg = 0 [mW]
/sys/devices/platform/smapi/BAT0/state = idle
tpacpi-bat.BAT0.startThreshold = 96 [%]
tpacpi-bat.BAT0.stopThreshold = 100 [%]
tpacpi-bat.BAT0.forceDischarge = 0
|
Dieses Gerät (oder was auch immer das ist) /sys/bus/pci/devices/0000:0d:00.0/power/control = on (0x088001, System peripheral, sdhci-pci)
| RUNTIME_PM_BLACKLIST="0d:00.0"
|
hab ich in die Blacklist aufgenommen. Ich finde es könnte jetzt funktionieren, tut es aber nicht.
|
hannes22
(Themenstarter)
Anmeldungsdatum: 20. August 2009
Beiträge: 266
|
Ist es also ein HW-Fehler? Was meint ihr?
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Ausschließen würde ich es nicht.Teste mal mit eingesteckter Karte lsusb -v|egrep "^Bus|MaxPower"
|
hannes22
(Themenstarter)
Anmeldungsdatum: 20. August 2009
Beiträge: 266
|
Cool
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17 |
h@tm1:~$ lsusb -v|egrep "^Bus|MaxPower"
Couldn't open device, some information will be missing
Couldn't open device, some information will be missing
Couldn't open device, some information will be missing
Couldn't open device, some information will be missing
Couldn't open device, some information will be missing
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
MaxPower 0mA
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
MaxPower 0mA
Bus 001 Device 003: ID 0a5c:217f Broadcom Corp. BCM2045B (BDC-2.1)
MaxPower 0mA
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
MaxPower 0mA
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
MaxPower 0mA
|
so sparsam sind nun auch wieder nicht. Ohne Karte ist es das Gleiche.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Das kommt mir auch etwas komisch vor 😮 Kannst es ja so nochmal Testen,glaube aber das Ergebnis ist das gleiche. usb-devices | grep 'Product=\|MxPwr' Vielleicht weiß ja jemand mehr?
|
hannes22
(Themenstarter)
Anmeldungsdatum: 20. August 2009
Beiträge: 266
|
| S: Product=EHCI Host Controller
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
S: Product=Broadcom Bluetooth Device
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
S: Product=EHCI Host Controller
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
|
Ah ha.
|
hannes22
(Themenstarter)
Anmeldungsdatum: 20. August 2009
Beiträge: 266
|
Hallo, hat jemand so ein Teil? Funktioniert da der SD Slot? Gruß Hannes
|