schön das Du Dich umgehend meldest ☺,
Ich weiss leider nicht wie man die Schnittstelle prüfen kann.
Habe jedoch schon, Probleme mit dem Netzwerkmanager.
Muß den Stick mitunter bis zu 3x mit passwort anmelden weil er von alleine offline geht.
Momentan bin ich auch zusätzlich mit meinem Home-Netz "Drachenfunk" per W-Lan verbunden. Auch das könnte für Konflikte sorgen.
Vielleicht hilft dass weiter:
usb-devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=02.06
S: Manufacturer=Linux 2.6.35-24-generic ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1a.7
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=02.06
S: Manufacturer=Linux 2.6.35-24-generic ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1d.7
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=140c Rev=00.00
S: Manufacturer=HUAWEI Technology
S: Product=HUAWEI Mobile
C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
I: If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=5986 ProdID=0195 Rev=14.15
S: Manufacturer=Bison Corp.
S: Product=Lenovo EasyCamera
C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=128mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
I: If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev=02.06
S: Manufacturer=Linux 2.6.35-24-generic uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1a.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev=02.06
S: Manufacturer=Linux 2.6.35-24-generic uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1a.1
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev=02.06
S: Manufacturer=Linux 2.6.35-24-generic uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1a.2
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=06 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev=02.06
S: Manufacturer=Linux 2.6.35-24-generic uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=07 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev=02.06
S: Manufacturer=Linux 2.6.35-24-generic uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.1
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=08 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev=02.06
S: Manufacturer=Linux 2.6.35-24-generic uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.2
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
dmesg
input/input0
[ 0.341486] ACPI: Lid Switch [LID0]
[ 0.341527] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.341532] ACPI: Power Button [PWRB]
[ 0.341570] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.341573] ACPI: Sleep Button [SLPB]
[ 0.341627] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.341630] ACPI: Power Button [PWRF]
[ 0.341982] ACPI: acpi_idle registered with cpuidle
[ 0.344501] Monitor-Mwait will be used to enter C-1 state
[ 0.344534] Monitor-Mwait will be used to enter C-2 state
[ 0.344539] Marking TSC unstable due to TSC halts in idle
[ 0.344922] Switching to clocksource hpet
[ 0.385644] ACPI: Invalid active0 threshold
[ 0.386220] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.386267] ACPI: Thermal Zone [TZ00] (25 C)
[ 0.386376] ERST: Table is not found!
[ 0.386642] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.388058] brd: module loaded
[ 0.388569] loop: module loaded
[ 0.389096] Fixed MDIO Bus: probed
[ 0.389130] PPP generic driver version 2.4.2
[ 0.389172] tun: Universal TUN/TAP device driver, 1.6
[ 0.389174] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.389251] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.389279] alloc irq_desc for 20 on node -1
[ 0.389281] alloc kstat_irqs on node -1
[ 0.389289] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 0.389309] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.389313] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.389346] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.389385] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.393286] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.393308] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xf4805800
[ 0.397228] isapnp: Scanning for PnP cards...
[ 0.412393] Freeing initrd memory: 10512k freed
[ 0.429023] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.429203] hub 1-0:1.0: USB hub found
[ 0.429209] hub 1-0:1.0: 6 ports detected
[ 0.429300] alloc irq_desc for 23 on node -1
[ 0.429302] alloc kstat_irqs on node -1
[ 0.429310] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.429331] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.429335] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.429372] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.429404] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.433294] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.433313] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4805c00
[ 0.449015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.449118] hub 2-0:1.0: USB hub found
[ 0.449122] hub 2-0:1.0: 6 ports detected
[ 0.449201] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.449218] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.449258] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.449265] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.449268] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.449300] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.449338] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 0.449447] hub 3-0:1.0: USB hub found
[ 0.449451] hub 3-0:1.0: 2 ports detected
[ 0.449515] alloc irq_desc for 21 on node -1
[ 0.449517] alloc kstat_irqs on node -1
[ 0.449522] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.449528] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.449532] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.449562] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.449599] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 0.449711] hub 4-0:1.0: USB hub found
[ 0.449715] hub 4-0:1.0: 2 ports detected
[ 0.449776] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 0.449783] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.449786] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.449823] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.449851] uhci_hcd 0000:00:1a.2: irq 20, io base 0x00001860
[ 0.449958] hub 5-0:1.0: USB hub found
[ 0.449961] hub 5-0:1.0: 2 ports detected
[ 0.450024] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.450030] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.450033] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.450064] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.450092] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 0.450201] hub 6-0:1.0: USB hub found
[ 0.450206] hub 6-0:1.0: 2 ports detected
[ 0.450265] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.450272] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.450275] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.450304] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.450341] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 0.450448] hub 7-0:1.0: USB hub found
[ 0.450452] hub 7-0:1.0: 2 ports detected
[ 0.450510] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.450516] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.450519] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.450552] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.450588] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 0.450693] hub 8-0:1.0: USB hub found
[ 0.450696] hub 8-0:1.0: 2 ports detected
[ 0.450820] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.519351] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.519372] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.519435] mice: PS/2 mouse device common for all mice
[ 0.519570] rtc_cmos 00:06: RTC can wake from S4
[ 0.519608] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.519638] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.519739] device-mapper: uevent: version 1.0.3
[ 0.519852] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.522244] device-mapper: multipath: version 1.1.1 loaded
[ 0.522246] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.522352] EISA: Probing bus 0 at eisa.0
[ 0.522354] EISA: Cannot allocate resource for mainboard
[ 0.522356] Cannot allocate resource for EISA slot 1
[ 0.522358] Cannot allocate resource for EISA slot 2
[ 0.522360] Cannot allocate resource for EISA slot 3
[ 0.522362] Cannot allocate resource for EISA slot 4
[ 0.522364] Cannot allocate resource for EISA slot 5
[ 0.522365] Cannot allocate resource for EISA slot 6
[ 0.522367] Cannot allocate resource for EISA slot 7
[ 0.522369] Cannot allocate resource for EISA slot 8
[ 0.522370] EISA: Detected 0 cards.
[ 0.522480] cpuidle: using governor ladder
[ 0.522554] cpuidle: using governor menu
[ 0.522845] TCP cubic registered
[ 0.522971] NET: Registered protocol family 10
[ 0.523304] lo: Disabled Privacy Extensions
[ 0.523524] NET: Registered protocol family 17
[ 0.528300] Using IPI No-Shortcut mode
[ 0.528384] PM: Resume from disk failed.
[ 0.528397] registered taskstats version 1
[ 0.529076] Magic number: 11:95:490
[ 0.529121] acpi PNP0F13:00: hash matches
[ 0.529164] rtc_cmos 00:06: setting system clock to 2011-01-20 16:27:29 UTC (1295540849)
[ 0.529167] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.529169] EDD information not available.
[ 0.552692] ACPI: Battery Slot [BAT1] (battery present)
[ 0.591724] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.751965] isapnp: No Plug & Play device found
[ 0.751993] Freeing unused kernel memory: 688k freed
[ 0.752334] Write protecting the kernel text: 4932k
[ 0.752384] Write protecting the kernel read-only data: 1980k
[ 0.761050] usb 2-3: new high speed USB device using ehci_hcd and address 2
[ 0.769703] udev[81]: starting version 163
[ 0.847232] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.847276] r8169 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.847404] r8169 0000:07:00.0: setting latency timer to 64
[ 0.847559] alloc irq_desc for 45 on node -1
[ 0.847561] alloc kstat_irqs on node -1
[ 0.847610] r8169 0000:07:00.0: irq 45 for MSI/MSI-X
[ 0.848137] r8169 0000:07:00.0: eth0: RTL8102e at 0xf805a000, 1c:75:08:53:9b:6c, XID 04e00000 IRQ 45
[ 0.914013] ahci 0000:00:1f.2: version 3.0
[ 0.914033] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.914085] alloc irq_desc for 46 on node -1
[ 0.914087] alloc kstat_irqs on node -1
[ 0.914100] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 0.914151] ahci: SSS flag set, parallel bus scan disabled
[ 0.914184] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x13 impl SATA mode
[ 0.914187] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 0.914193] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.929145] scsi0 : ahci
[ 0.929264] scsi1 : ahci
[ 0.929330] scsi2 : ahci
[ 0.929393] scsi3 : ahci
[ 0.929454] scsi4 : ahci
[ 0.929509] ata1: SATA max UDMA/133 abar m2048@0xf4805000 port 0xf4805100 irq 46
[ 0.929513] ata2: SATA max UDMA/133 abar m2048@0xf4805000 port 0xf4805180 irq 46
[ 0.929515] ata3: DUMMY
[ 0.929517] ata4: DUMMY
[ 0.929519] ata5: SATA max UDMA/133 abar m2048@0xf4805000 port 0xf4805300 irq 46
[ 1.248066] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.249109] ata1.00: ATA-8: HITACHI HTS545025B9A300, PB2ZC61H, max UDMA/100
[ 1.249112] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.250346] ata1.00: configured for UDMA/100
[ 1.264211] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54502 PB2Z PQ: 0 ANSI: 5
[ 1.264372] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.264452] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.264502] sd 0:0:0:0: [sda] Write Protect is off
[ 1.264504] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.264524] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.264660] sda: sda1 sda2 < sda5 >
[ 1.312748] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.988068] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.005205] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633B, LEW1, max UDMA/100
[ 2.022021] ata2.00: configured for UDMA/100
[ 2.038044] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633B LEW1 PQ: 0 ANSI: 5
[ 2.042812] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.042816] Uniform CD-ROM driver Revision: 3.20
[ 2.042915] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.042977] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.360064] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.713365] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.471718] udev[355]: starting version 163
[ 14.528703] lp: driver loaded but no devices found
[ 14.546725] Adding 6142972k swap on /dev/sda5. Priority:-1 extents:1 across:6142972k
[ 14.643034] lib80211: common routines for IEEE802.11 drivers
[ 14.643037] lib80211_crypt: registered algorithm 'NULL'
[ 14.689132] Linux agpgart interface v0.103
[ 14.692915] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 14.755996] wl: module license 'MIXED/Proprietary' taints kernel.
[ 14.756046] Disabling lock debugging due to kernel taint
[ 14.772014] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 14.819628] wl 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 14.819641] wl 0000:04:00.0: setting latency timer to 64
[ 14.847809] Linux video capture interface: v2.00
[ 14.860266] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0195)
[ 14.863260] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.0/input/input5
[ 14.863315] usbcore: registered new interface driver uvcvideo
[ 14.863317] USB Video Class driver (v0.1.0)
[ 14.864976] [drm] Initialized drm 1.1.0 20060810
[ 14.901697] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 14.912789] lib80211_crypt: registered algorithm 'TKIP'
[ 14.913114] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.60.48.36
[ 14.919858] type=1400 audit(1295540863.885:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=654 comm="apparmor_parser"
[ 14.920800] type=1400 audit(1295540863.885:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=654 comm="apparmor_parser"
[ 14.921149] type=1400 audit(1295540863.889:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=654 comm="apparmor_parser"
[ 14.925781] type=1400 audit(1295540863.893:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=660 comm="apparmor_parser"
[ 14.926414] type=1400 audit(1295540863.893:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=660 comm="apparmor_parser"
[ 14.926766] type=1400 audit(1295540863.893:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=660 comm="apparmor_parser"
[ 14.934946] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.934952] i915 0000:00:02.0: setting latency timer to 64
[ 14.966178] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 14.982264] alloc irq_desc for 47 on node -1
[ 14.982268] alloc kstat_irqs on node -1
[ 14.982277] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[ 14.982290] [drm] set up 31M of stolen space
[ 15.104350] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 15.401062] Skipping EDID probe due to cached edid
[ 15.468368] type=1400 audit(1295540864.437:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=847 comm="apparmor_parser"
[ 15.481309] type=1400 audit(1295540864.449:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=849 comm="apparmor_parser"
[ 15.493730] type=1400 audit(1295540864.461:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=849 comm="apparmor_parser"
[ 15.502095] type=1400 audit(1295540864.469:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=849 comm="apparmor_parser"
[ 15.607120] psmouse serio1: ID: 73 02 64
[ 15.829125] r8169 0000:07:00.0: eth0: link down
[ 15.829358] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.188412] Console: switching to colour frame buffer device 170x48
[ 16.191920] fb0: inteldrmfb frame buffer device
[ 16.191921] drm: registered panic notifier
[ 16.191924] Slow work thread pool: Starting up
[ 16.191993] Slow work thread pool: Ready
[ 16.197080] acpi device:07: registered as cooling_device2
[ 16.198798] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6
[ 16.198995] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 16.199143] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 16.199524] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 16.199563] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 16.199573] alloc irq_desc for 22 on node -1
[ 16.199575] alloc kstat_irqs on node -1
[ 16.199583] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 16.199640] alloc irq_desc for 48 on node -1
[ 16.199642] alloc kstat_irqs on node -1
[ 16.199654] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 16.199688] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 16.245709] Skipping EDID probe due to cached edid
[ 16.269099] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 16.269338] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 16.269557] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 16.439808] ppdev: user-space parallel port driver
[ 16.813304] Skipping EDID probe due to cached edid
[ 16.840097] Skipping EDID probe due to cached edid
[ 16.872948] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input10
[ 17.925984] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 18.545078] Skipping EDID probe due to cached edid
[ 18.573065] Skipping EDID probe due to cached edid
[ 18.605097] Skipping EDID probe due to cached edid
[ 18.637072] Skipping EDID probe due to cached edid
[ 19.600083] Skipping EDID probe due to cached edid
[ 20.622459] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 24.249064] Skipping EDID probe due to cached edid
[ 26.576026] eth1: no IPv6 routers present
[ 108.832084] usb 2-2: new high speed USB device using ehci_hcd and address 3
[ 109.012736] Initializing USB Mass Storage driver...
[ 109.012864] scsi5 : usb-storage 2-2:1.0
[ 109.013109] scsi6 : usb-storage 2-2:1.1
[ 109.013215] usbcore: registered new interface driver usb-storage
[ 109.013217] USB Mass Storage support registered.
[ 109.855564] usb 2-2: USB disconnect, address 3
[ 114.788056] usb 2-2: new high speed USB device using ehci_hcd and address 4
[ 114.937786] scsi11 : usb-storage 2-2:1.4
[ 114.942931] usbcore: registered new interface driver usbserial
[ 114.942947] USB Serial support registered for generic
[ 114.944937] scsi12 : usb-storage 2-2:1.5
[ 114.945361] usbcore: registered new interface driver usbserial_generic
[ 114.945364] usbserial: USB Serial Driver core
[ 114.950570] USB Serial support registered for GSM modem (1-port)
[ 114.951063] option 2-2:1.0: GSM modem (1-port) converter detected
[ 114.951368] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 114.951385] option 2-2:1.1: GSM modem (1-port) converter detected
[ 114.952436] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 114.952461] option 2-2:1.2: GSM modem (1-port) converter detected
[ 114.953619] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB2
[ 114.953643] option 2-2:1.3: GSM modem (1-port) converter detected
[ 114.954099] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB3
[ 114.954705] usbcore: registered new interface driver option
[ 114.954710] option: v0.7.2:USB Driver for GSM modems
[ 115.941615] scsi 11:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 115.947736] scsi 12:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 115.951068] sr1: scsi-1 drive
[ 115.951286] sr 11:0:0:0: Attached scsi CD-ROM sr1
[ 115.951417] sr 11:0:0:0: Attached scsi generic sg2 type 5
[ 115.953456] sd 12:0:0:0: Attached scsi generic sg3 type 0
[ 115.962701] sd 12:0:0:0: [sdb] Attached SCSI removable disk
[ 152.204050] PPP BSD Compression module registered
[ 152.210502] PPP Deflate Compression module registered
[ 164.561502] option: option_instat_callback: error -71
[ 164.562497] option: option_instat_callback: error -71
[ 164.753530] option: option_instat_callback: error -71
[ 164.754522] option: option_instat_callback: error -71
[ 164.945509] option: option_instat_callback: error -71
[ 164.946507] option: option_instat_callback: error -71
[ 165.137540] option: option_instat_callback: error -71
[ 165.138532] option: option_instat_callback: error -71
[ 165.329678] option: option_instat_callback: error -71
[ 165.330641] option: option_instat_callback: error -71
[ 165.521683] option: option_instat_callback: error -71
[ 165.522677] option: option_instat_callback: error -71
[ 165.713687] option: option_instat_callback: error -71
[ 165.714682] option: option_instat_callback: error -71
[ 165.905692] option: option_instat_callback: error -71
[ 165.906687] option: option_instat_callback: error -71
[ 166.097701] option: option_instat_callback: error -71
[ 166.098693] option: option_instat_callback: error -71
[ 166.289702] option: option_instat_callback: error -71
[ 166.290697] option: option_instat_callback: error -71
[ 166.481712] option: option_instat_callback: error -71
[ 166.482704] option: option_instat_callback: error -71
[ 166.673713] option: option_instat_callback: error -71
[ 166.674708] option: option_instat_callback: error -71
[ 166.865720] option: option_instat_callback: error -71
[ 166.866714] option: option_instat_callback: error -71
[ 167.057579] option: option_instat_callback: error -71
[ 167.058585] option: option_instat_callback: error -71
[ 167.249595] option: option_instat_callback: error -71
[ 167.250582] option: option_instat_callback: error -71
[ 167.441735] option: option_instat_callback: error -71
[ 167.442729] option: option_instat_callback: error -71
[ 167.633742] option: option_instat_callback: error -71
[ 167.634734] option: option_instat_callback: error -71
[ 167.825746] option: option_instat_callback: error -71
[ 167.826740] option: option_instat_callback: error -71
[ 168.017750] option: option_instat_callback: error -71
[ 168.018745] option: option_instat_callback: error -71
[ 168.209756] option: option_instat_callback: error -71
[ 168.210751] option: option_instat_callback: error -71
[ 168.401760] option: option_instat_callback: error -71
[ 168.402756] option: option_instat_callback: error -71
[ 168.545939] usb 2-2: USB disconnect, address 4
[ 168.546022] option: option_instat_callback: error -108
[ 168.546099] option: option_instat_callback: error -108
[ 168.546333] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 168.546357] option 2-2:1.0: device disconnected
[ 168.546511] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 168.546539] option 2-2:1.1: device disconnected
[ 168.546675] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 168.546705] option 2-2:1.2: device disconnected
[ 168.546840] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
[ 168.546864] option 2-2:1.3: device disconnected
[ 168.805089] usb 2-2: new high speed USB device using ehci_hcd and address 5
[ 168.940658] scsi13 : usb-storage 2-2:1.0
[ 168.941144] scsi14 : usb-storage 2-2:1.1
[ 169.739991] usb 2-2: USB disconnect, address 5
[ 173.825056] usb 2-2: new high speed USB device using ehci_hcd and address 6
[ 173.964971] option 2-2:1.0: GSM modem (1-port) converter detected
[ 173.965166] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 173.967357] option 2-2:1.1: GSM modem (1-port) converter detected
[ 173.967554] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 173.974722] option 2-2:1.2: GSM modem (1-port) converter detected
[ 173.974896] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB2
[ 173.983121] option 2-2:1.3: GSM modem (1-port) converter detected
[ 173.983290] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB3
[ 173.996520] scsi19 : usb-storage 2-2:1.4
[ 174.017790] scsi20 : usb-storage 2-2:1.5
[ 175.006492] scsi 19:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 175.013210] sr1: scsi-1 drive
[ 175.013428] sr 19:0:0:0: Attached scsi CD-ROM sr1
[ 175.015815] sr 19:0:0:0: Attached scsi generic sg2 type 5
[ 175.022738] scsi 20:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 175.024034] sd 20:0:0:0: Attached scsi generic sg3 type 0
[ 175.031928] sd 20:0:0:0: [sdb] Attached SCSI removable disk
[ 214.235883] option: option_instat_callback: error -71
[ 214.236866] option: option_instat_callback: error -71
[ 214.427904] option: option_instat_callback: error -71
[ 214.428889] option: option_instat_callback: error -71
[ 214.619888] option: option_instat_callback: error -71
[ 214.620876] option: option_instat_callback: error -71
[ 214.811884] option: option_instat_callback: error -71
[ 214.812880] option: option_instat_callback: error -71
[ 215.004047] option: option_instat_callback: error -71
[ 215.005038] option: option_instat_callback: error -71
[ 215.196051] option: option_instat_callback: error -71
[ 215.197044] option: option_instat_callback: error -71
[ 215.388026] option: option_instat_callback: error -71
[ 215.389022] option: option_instat_callback: error -71
[ 215.580063] option: option_instat_callback: error -71
[ 215.581066] option: option_instat_callback: error -71
[ 215.772039] option: option_instat_callback: error -71
[ 215.773061] option: option_instat_callback: error -71
[ 215.964076] option: option_instat_callback: error -71
[ 215.965065] option: option_instat_callback: error -71
[ 216.156062] option: option_instat_callback: error -71
[ 216.157049] option: option_instat_callback: error -71
[ 216.348052] option: option_instat_callback: error -71
[ 216.349071] option: option_instat_callback: error -71
[ 216.540070] option: option_instat_callback: error -71
[ 216.541085] option: option_instat_callback: error -71
[ 216.732083] option: option_instat_callback: error -71
[ 216.733065] option: option_instat_callback: error -71
[ 216.923938] option: option_instat_callback: error -71
[ 216.924936] option: option_instat_callback: error -71
[ 217.115948] option: option_instat_callback: error -71
[ 217.116944] option: option_instat_callback: error -71
[ 217.307956] option: option_instat_callback: error -71
[ 217.309072] option: option_instat_callback: error -71
[ 217.500116] option: option_instat_callback: error -71
[ 217.501108] option: option_instat_callback: error -71
[ 217.561039] usb 2-2: USB disconnect, address 6
[ 217.561119] option: option_instat_callback: error -108
[ 217.561197] option: option_instat_callback: error -108
[ 217.561427] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 217.561446] option 2-2:1.0: device disconnected
[ 217.561602] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 217.561631] option 2-2:1.1: device disconnected
[ 217.561775] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 217.561801] option 2-2:1.2: device disconnected
[ 217.561928] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
[ 217.561952] option 2-2:1.3: device disconnected
[ 217.820091] usb 2-2: new high speed USB device using ehci_hcd and address 7
[ 217.957006] scsi21 : usb-storage 2-2:1.0
[ 217.961755] scsi22 : usb-storage 2-2:1.1
[ 218.747424] usb 2-2: USB disconnect, address 7
[ 222.817071] usb 2-2: new high speed USB device using ehci_hcd and address 8
[ 222.953650] option 2-2:1.0: GSM modem (1-port) converter detected
[ 222.953817] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 222.956714] option 2-2:1.1: GSM modem (1-port) converter detected
[ 222.956897] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 222.960416] option 2-2:1.2: GSM modem (1-port) converter detected
[ 222.960573] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB2
[ 222.967530] option 2-2:1.3: GSM modem (1-port) converter detected
[ 222.967693] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB3
[ 222.983399] scsi27 : usb-storage 2-2:1.4
[ 223.010190] scsi28 : usb-storage 2-2:1.5
[ 223.990214] scsi 27:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 223.998046] sr1: scsi-1 drive
[ 223.998262] sr 27:0:0:0: Attached scsi CD-ROM sr1
[ 223.998390] sr 27:0:0:0: Attached scsi generic sg2 type 5
[ 224.011084] scsi 28:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 224.013803] sd 28:0:0:0: Attached scsi generic sg3 type 0
[ 224.019043] sd 28:0:0:0: [sdb] Attached SCSI removable disk
lsmod
Module Size Used by
ppp_deflate 3726 0
zlib_deflate 19266 1 ppp_deflate
bsd_comp 4791 0
ppp_async 6778 1
crc_ccitt 1351 1 ppp_async
option 13133 1
usb_wwan 9953 1 option
usbserial 33100 5 option,usb_wwan
usb_storage 40172 0
binfmt_misc 6599 1
parport_pc 26058 0
ppdev 5556 0
snd_hda_codec_conexant 29971 1
snd_hda_intel 22107 2
snd_hda_codec 87552 2 snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 5040 1 snd_hda_codec
snd_pcm 71475 2 snd_hda_intel,snd_hda_codec
snd_seq_midi 4588 0
snd_rawmidi 17783 1 snd_seq_midi
i915 294989 4
snd_seq_midi_event 6047 1 snd_seq_midi
lib80211_crypt_tkip 7736 0
snd_seq 47174 3 snd_seq_midi,snd_seq_midi_event
snd_timer 19067 2 snd_pcm,snd_seq
drm_kms_helper 30200 1 i915
uvcvideo 55847 0
snd_seq_device 5744 3 snd_seq_midi,snd_rawmidi,snd_seq
videodev 43098 1 uvcvideo
wl 1959533 0
drm 168092 4 i915,drm_kms_helper
v4l1_compat 13359 2 uvcvideo,videodev
intel_agp 26694 2 i915
psmouse 59033 0
serio_raw 4022 0
lib80211 5058 2 lib80211_crypt_tkip,wl
snd 49038 14 snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
agpgart 32011 2 drm,intel_agp
i2c_algo_bit 5168 1 i915
video 18712 1 i915
output 1883 1 video
soundcore 880 1 snd
snd_page_alloc 7120 2 snd_hda_intel,snd_pcm
lp 7342 0
parport 31492 3 parport_pc,ppdev,lp
ahci 19198 2
libahci 21664 1 ahci
r8169 36489 0
mii 4425 1 r8169
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
eth1 IEEE 802.11 Access Point: Not-Associated
Link Quality:4 Signal level:195 Noise level:172
Rx invalid nwid:0 invalid crypt:0 invalid misc:0
ppp0 no wireless extensions.
iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
eth1 Scan completed :
Cell 01 - Address: 00:04:0E:D5:81:F1
ESSID:"Drachenfunk"
Mode:Managed
Frequency:2.442 GHz (Channel 7)
Quality:4/5 Signal level:-60 dBm Noise level:-87 dBm
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Cell 02 - Address: 00:1D:19:1E:D7:7A
ESSID:"WirWob"
Mode:Managed
Frequency:2.447 GHz (Channel 8)
Quality:1/5 Signal level:-80 dBm Noise level:-92 dBm
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
Preauthentication Supported
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
ppp0 Interface doesn't support scanning.
soeben hat sich der stick auch wieder verabschiedet.(??)