@Kellerkind_2009
bino@bino-ulx:~$ ls -l ~/.config/GIMP
ls: Zugriff auf '/home/bino/.config/GIMP' nicht möglich: Datei oder Verzeichnis nicht gefunden
bino@bino-ulx:~$
bino@bino-ulx:~$ cat /etc/sane.d/pixma.conf
# pixma.conf configuration for the sane pixma backend
#
# bjnp-timeout=5000
# Specify the timeout (in ms) to be used for all the folllowing
# scanners.
# May be specified multiple times.
# The last value (if any) will be used for auto-detection
#
# define URI's of scanners (one per line)
# This is only used for network scanners.
# normally scanners will be detected by sending a broadcast
# if this does not work under your OS, or if the scanners
# are on a different subnet, configure your scanners URI here
#
# method must be bjnp
# port number can normally be left out, port 8612 is used as default
# The timeout parameter sets a timeout value for the scanner on
# the same line
# Example:
# bjnp://myscanner.my.domain:8612 // uses the default 1000ms timeout
# bjnp-timeout=5000
# bjnp://printer-1.pheasant.org // will use the 5000 ms timeout
# bjnp://scanner.bad-network.org/timeout=1500 // timeout set to 1500 ms
# bjnp-timeout=3000 // will be used for auto-detected scanners
#
#
# Verzögerung für MX870-Scannerinitialisierung
#bjnp://192.168.178.10:8612/timeout=8000
bjnp://192.168.178.10:8612/timeout=15000
#
bino@bino-ulx:~$
bino@bino-ulx:~$ cat /etc/sane.d/dll.conf
# dll.conf - Configuration file for the SANE dynamic backend loader
#
# Backends can also be enabled by configuration snippets under the dll.d/
# directory -- third party backends can drop their configuration file in
# this in this directory, named after the backend.
#
# The next line enables the network backend; comment it out if you don't
# need to use a remote SANE scanner over the network -- see sane-net(5)
# and saned(8) for details.
net
abaton
agfafocus
apple
avision
artec
artec_eplus48u
as6e
bh
canon
canon630u
canon_dr
#canon_pp
cardscan
coolscan
#coolscan2
coolscan3
#dc25
#dc210
#dc240
dell1600n_net
dmc
epjitsu
#epson
epson2
epsonds
fujitsu
#gphoto2
genesys
gt68xx
hp
hp3900
hpsj5s
hp3500
hp4200
hp5400
hp5590
hpljm1005
hs2p
ibm
kodak
kodakaio
kvs1025
kvs20xx
leo
lexmark
ma1509
magicolor
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
mustek_usb2
nec
niash
#p5
pie
pint
pixma
plustek
#plustek_pp
#pnm
qcam
ricoh
rts8891
s9036
sceptre
sharp
sm3600
sm3840
snapscan
sp15c
#st400
#stv680
tamarack
teco1
teco2
teco3
#test
u12
umax
#umax_pp
umax1220u
v4l
xerox_mfp
bino@bino-ulx:~$
Und jetzt @Bournless
bino@bino-ulx:~$ cat /etc/sane.d/pixma.conf
# pixma.conf configuration for the sane pixma backend
#
# bjnp-timeout=5000
# Specify the timeout (in ms) to be used for all the folllowing
# scanners.
# May be specified multiple times.
# The last value (if any) will be used for auto-detection
#
# define URI's of scanners (one per line)
# This is only used for network scanners.
# normally scanners will be detected by sending a broadcast
# if this does not work under your OS, or if the scanners
# are on a different subnet, configure your scanners URI here
#
# method must be bjnp
# port number can normally be left out, port 8612 is used as default
# The timeout parameter sets a timeout value for the scanner on
# the same line
# Example:
# bjnp://myscanner.my.domain:8612 // uses the default 1000ms timeout
# bjnp-timeout=5000
# bjnp://printer-1.pheasant.org // will use the 5000 ms timeout
# bjnp://scanner.bad-network.org/timeout=1500 // timeout set to 1500 ms
# bjnp-timeout=3000 // will be used for auto-detected scanners
#
#
# Verzögerung für MX870-Scannerinitialisierung
#bjnp://192.168.178.10:8612/timeout=8000
#bjnp://192.168.178.10:8612/timeout=15000
bjnp://MX870.fritz.box:8612/timeout=1500
#
bino@bino-ulx:~$
Danach System rebootet, und mit Gimp über das Menü Datei|Erstellen|Xsane|pixma:MX870MX870.fritz.box). das Vorschaufenster gestartet.
Ergebnis: Siehe Bildschirmfoto im Anhang.