Juzer
(Themenstarter)
Anmeldungsdatum: 22. Oktober 2011
Beiträge: Zähle...
|
mit eingestecktem Kabel:
uname -a
Linux xxx-desktop 2.6.38-11-generic #50-Ubuntu SMP Mon Sep 12 21:17:25 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
lspci -nnk | grep -i net -a2
Kernel driver in use: ahci
Kernel modules: ahci
00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP77 Ethernet [10de:0760] (rev a2)
Subsystem: ASRock Incorporation K10N78FullHD-hSLI R3.0 Ethernet [1849:0760]
Kernel driver in use: forcedeth
Kernel modules: forcedeth
lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 15a4:1336 Afatech Technologies, Inc. SDHC/MicroSD/MMC/MS/M2/CF/XD Flash Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
egrep -v "^$|^#" /etc/network/interfaces
auto lo
iface lo inet loopback
egrep -v "^$|^#" /etc/resolv.conf
domain omp.hansenet.de
search omp.hansenet.de
egrep -v "^$|^#" /etc/hosts
127.0.0.1 localhost
127.0.1.1 xxx-desktop
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
cat /etc/udev/rules.d/70-persistent-net.rules
# This file maintains persistent names for network interfaces.
# See udev(7) for syntax.
#
# Entries are automatically added by the 75-persistent-net-generator.rules
# file; however you are also free to add your own entries.
# PCI device 0x10de:0x0760 (forcedeth)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:25:22:2c:1e:f6", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
ping -c 4 www.ubuntuusers.de
ping: unknown host www.ubuntuusers.de
ping -c 4 213.95.41.11
PING 213.95.41.11 (213.95.41.11) 56(84) bytes of data.
--- 213.95.41.11 ping statistics ---
4 packets transmitted, 0 received, 100% packet loss, time 3007ms
iwlist chan
lo no frequency information.
eth0 no frequency information.
sudo iwlist scan
[sudo] password for xxx:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
lsmod
Module Size Used by
parport_pc 36959 0
ppdev 17113 0
snd_hda_codec_realtek 336771 1
nouveau 682322 2
snd_hda_intel 33176 5
snd_hda_codec 103804 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 13604 1 snd_hda_codec
rt3572sta 649300 0
snd_pcm 96391 3 snd_hda_intel,snd_hda_codec
ttm 76664 1 nouveau
drm_kms_helper 42136 1 nouveau
snd_seq_midi 13324 0
drm 227534 4 nouveau,ttm,drm_kms_helper
snd_rawmidi 30486 1 snd_seq_midi
i2c_algo_bit 13400 1 nouveau
video 19438 1 nouveau
snd_seq_midi_event 14899 1 snd_seq_midi
snd_seq 61621 2 snd_seq_midi,snd_seq_midi_event
snd_timer 29602 2 snd_pcm,snd_seq
snd_seq_device 14462 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 67382 18 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse 73535 0
edac_core 53845 0
shpchp 37297 0
soundcore 12680 1 snd
snd_page_alloc 18529 2 snd_hda_intel,snd_pcm
k10temp 13119 0
edac_mce_amd 23464 0
i2c_nforce2 13058 0
serio_raw 13166 0
lp 17825 0
parport 46458 3 parport_pc,ppdev,lp
usb_storage 53538 0
uas 17996 0
ahci 25951 2
libahci 26642 1 ahci
forcedeth 63555 0
pata_amd 14130 0
dmesg | egrep 'net|eth|sky|sis|via|3c3|3c5|e100|8139|8169|acx|air|ath|atl|ar9|carl|atme|at7|herm|iwl|ipw|rtl8|r81|rt2|rt3|rt6|rt7|tg3|ssb|wl|b43|b44|ori|pri|p5|zd|ndis|wmi|ns8'
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880037c00000 s84416 r8192 d22080 u524288
[ 0.000000] pcpu-alloc: s84416 r8192 d22080 u524288 alloc=1*2097152
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.011380] Initializing cgroup subsys net_cls
[ 0.632553] print_constraints: dummy:
[ 0.667702] wmi: Mapper loaded
[ 0.686258] audit: initializing netlink socket (disabled)
[ 1.132015] i2c-core: driver [adp5520] using legacy suspend method
[ 1.132016] i2c-core: driver [adp5520] using legacy resume method
[ 1.132858] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.540333] device-mapper: multipath: version 1.2.0 loaded
[ 1.540336] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.593790] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.593936] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
[ 1.593939] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 1.761166] ata2: port disabled. ignoring.
[ 2.120894] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:25:22:2c:1e:f6
[ 2.120897] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
[ 14.028603] Adding 915452k swap on /dev/sda5. Priority:-1 extents:1 across:915452k
[ 14.115294] rtusb init rt2870 --->
[ 14.117399] usbcore: registered new interface driver rt2870
[ 14.588671] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 14.588864] forcedeth 0000:00:0a.0: eth0: no link during initialization
[ 14.589383] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.263915] fbcon: nouveaufb (fb0) is primary device
[ 457.634890] rtusb_disconnect: unregister usbnet usb-0000:00:02.1-2
[ 461.362180] forcedeth 0000:00:0a.0: eth0: link up
[ 461.363187] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 462.933581] forcedeth 0000:00:0a.0: eth0: link down
[ 464.706854] forcedeth 0000:00:0a.0: eth0: link up
[ 471.680046] eth0: no IPv6 routers present
cat /var/lib/NetworkManager/NetworkManager.state
[main]
NetworkingEnabled=true
WirelessEnabled=false
WWANEnabled=true
Mit eingestecktem WLAN-Stick:
uname -a
Linux xxx-desktop 2.6.38-11-generic #50-Ubuntu SMP Mon Sep 12 21:17:25 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
xxx@xxx-desktop:~$ lspci -nn
00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0754] (rev a2)
00:01.0 ISA bridge [0601]: nVidia Corporation MCP78S [GeForce 8200] LPC Bridge [10de:075c] (rev a2)
00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus [10de:0752] (rev a1)
00:01.2 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0751] (rev a1)
00:01.3 Co-processor [0b40]: nVidia Corporation MCP78S [GeForce 8200] Co-Processor [10de:0753] (rev a2)
00:01.4 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0568] (rev a1)
00:02.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077b] (rev a1)
00:02.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077c] (rev a1)
00:04.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077d] (rev a1)
00:04.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077e] (rev a1)
00:06.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] IDE [10de:0759] (rev a1)
00:07.0 Audio device [0403]: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio [10de:0774] (rev a1)
00:08.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:075a] (rev a1)
00:09.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] SATA Controller (non-AHCI mode) [10de:0ad0] (rev a2)
00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP77 Ethernet [10de:0760] (rev a2)
00:0b.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0569] (rev a1)
00:10.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0778] (rev a1)
00:12.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:075b] (rev a1)
00:13.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:077a] (rev a1)
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
02:00.0 VGA compatible controller [0300]: nVidia Corporation C77 [GeForce 8200] [10de:0849] (rev a2)
xxx@xxx-desktop:~$ lspci -nnk | grep -i net -a2
Kernel driver in use: ahci
Kernel modules: ahci
00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP77 Ethernet [10de:0760] (rev a2)
Subsystem: ASRock Incorporation K10N78FullHD-hSLI R3.0 Ethernet [1849:0760]
Kernel driver in use: forcedeth
Kernel modules: forcedeth
xxx@xxx-desktop:~$ pccardct1 info
Der Befehl »pccardct1« wurde nicht gefunden, meinten Sie vielleicht:
Befehl »pccardctl« aus dem Paket »pcmciautils« (main)
pccardct1: Befehl nicht gefunden
xxx@xxx-desktop:~$ lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0df6:0041 Sitecom Europe B.V. WL-329 Wireless Dualband USB adapter 300N
Bus 001 Device 003: ID 15a4:1336 Afatech Technologies, Inc. SDHC/MicroSD/MMC/MS/M2/CF/XD Flash Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
xxx@xxx-desktop:~$ egrep -v "^$|^#" /etc/network/interfaces
auto lo
iface lo inet loopback
xxx@xxx-desktop:~$ egrep -v "^$|^#" /etc/resolv.conf
xxx@xxx-desktop:~$ egrep -v "^$|^#" /etc/hosts
127.0.0.1 localhost
127.0.1.1 xxx-desktop
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
xxx@xxx-desktop:~$ cat /etc/udev/rules.d/70-persistent-net.rules
# This file maintains persistent names for network interfaces.
# See udev(7) for syntax.
#
# Entries are automatically added by the 75-persistent-net-generator.rules
# file; however you are also free to add your own entries.
# PCI device 0x10de:0x0760 (forcedeth)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:25:22:2c:1e:f6", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
xxx@xxx-desktop:~$ ping -c 4 www.ubuntuusers.de
ping: unknown host www.ubuntuusers.de
xxx@xxx-desktop:~$ ping -c 4 213.95.41.11
connect: Network is unreachable
xxx@xxx-desktop:~$ iwlist chan
lo no frequency information.
eth0 no frequency information.
ra0 0 channels
xxx@xxx-desktop:~$ sudo iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
ra0 Interface doesn't support scanning : Network is down
xxx@xxx-desktop:~$ lsmod
Module Size Used by
parport_pc 36959 0
ppdev 17113 0
snd_hda_codec_realtek 336771 1
nouveau 682322 2
snd_hda_intel 33176 5
snd_hda_codec 103804 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 13604 1 snd_hda_codec
rt3572sta 649300 0
snd_pcm 96391 3 snd_hda_intel,snd_hda_codec
ttm 76664 1 nouveau
drm_kms_helper 42136 1 nouveau
snd_seq_midi 13324 0
drm 227534 4 nouveau,ttm,drm_kms_helper
snd_rawmidi 30486 1 snd_seq_midi
i2c_algo_bit 13400 1 nouveau
video 19438 1 nouveau
snd_seq_midi_event 14899 1 snd_seq_midi
snd_seq 61621 2 snd_seq_midi,snd_seq_midi_event
snd_timer 29602 2 snd_pcm,snd_seq
snd_seq_device 14462 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 67382 18 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse 73535 0
edac_core 53845 0
shpchp 37297 0
soundcore 12680 1 snd
snd_page_alloc 18529 2 snd_hda_intel,snd_pcm
k10temp 13119 0
edac_mce_amd 23464 0
i2c_nforce2 13058 0
serio_raw 13166 0
lp 17825 0
parport 46458 3 parport_pc,ppdev,lp
usb_storage 53538 0
uas 17996 0
ahci 25951 2
libahci 26642 1 ahci
forcedeth 63555 0
pata_amd 14130 0
xxx@xxx-desktop:~$ dmesg | egrep 'net|eth|sky|sis|via|3c3|3c5|e100|8139|8169|acx|air|ath|atl|ar9|carl|atme|at7|herm|iwl|ipw|rtl8|r81|rt2|rt3|rt6|rt7|tg3|ssb|wl|b43|b44|ori|pri|p5|zd|ndis|wmi|ns8'
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880037c00000 s84416 r8192 d22080 u524288
[ 0.000000] pcpu-alloc: s84416 r8192 d22080 u524288 alloc=1*2097152
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.011380] Initializing cgroup subsys net_cls
[ 0.632553] print_constraints: dummy:
[ 0.667702] wmi: Mapper loaded
[ 0.686258] audit: initializing netlink socket (disabled)
[ 1.132015] i2c-core: driver [adp5520] using legacy suspend method
[ 1.132016] i2c-core: driver [adp5520] using legacy resume method
[ 1.132858] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.540333] device-mapper: multipath: version 1.2.0 loaded
[ 1.540336] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.593790] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.593936] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
[ 1.593939] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 1.761166] ata2: port disabled. ignoring.
[ 2.120894] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:25:22:2c:1e:f6
[ 2.120897] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
[ 14.028603] Adding 915452k swap on /dev/sda5. Priority:-1 extents:1 across:915452k
[ 14.115294] rtusb init rt2870 --->
[ 14.117399] usbcore: registered new interface driver rt2870
[ 14.588671] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 14.588864] forcedeth 0000:00:0a.0: eth0: no link during initialization
[ 14.589383] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.263915] fbcon: nouveaufb (fb0) is primary device
[ 457.634890] rtusb_disconnect: unregister usbnet usb-0000:00:02.1-2
[ 461.362180] forcedeth 0000:00:0a.0: eth0: link up
[ 461.363187] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 462.933581] forcedeth 0000:00:0a.0: eth0: link down
[ 464.706854] forcedeth 0000:00:0a.0: eth0: link up
[ 471.680046] eth0: no IPv6 routers present
[ 2386.905254] forcedeth 0000:00:0a.0: eth0: link down
xxx@xxx-desktop:~$ cat /var/lib/NetworkManager/NetworkManager.state
[main]
NetworkingEnabled=true
WirelessEnabled=false
WWANEnabled=true
Beim Anpingen des Routers kommt dasselbe raus wie beim Anpingen von 213.95.41.11
|
praseodym
Supporter
Anmeldungsdatum: 9. Februar 2009
Beiträge: 22097
Wohnort: ~
|
WirelessEnabled=false
Ändere das in true um und starte das Netzwerk neu.
|
Juzer
(Themenstarter)
Anmeldungsdatum: 22. Oktober 2011
Beiträge: 29
|
Hallo, ich habe die Datei entsprechend geändert, aber das hat nichts bewirkt. Schließlich funktioniert auch LAN nicht, und das kann nicht an einer WLAN-Einstellung liegen. Wenn ich es versuche, mich mit dem Router über den WLAN-Stick zu verbinden, quält sich der Rechner eine Minute lang und springt dann in den TEXT-Modus rein.
|
elektronenblitz63
Anmeldungsdatum: 16. Januar 2007
Beiträge: 29307
Wohnort: NRW
|
Ok, dann probieren wir das mal wie ganz am Anfang vorgeschlagen. Stick abziehen, Modul entladen, Treiber sperren und Konfiguration bereinigen:
sudo modprobe -rfv rt3572sta
echo "blacklist rt3572sta" | sudo tee -a /etc/modprobe.d/blacklist.conf
sudo rm /etc/modprobe.d/rt2870sta.conf
sudo rm /etc/modprobe.d/rt2800usb.conf
Stick anschließen und so wie bereits hier beschrieben konfigurieren und testen.
|
Juzer
(Themenstarter)
Anmeldungsdatum: 22. Oktober 2011
Beiträge: 29
|
Nach "sudo modprobe rt2800usb" springt er in den Text-Modus rein und gibt lauter für mich unverständliches Zeug aus: [ 1073.945416] Ooops: 000 [#1] SMP usw. usf. Im Terminal steht dann: Killed
FATAL: Error running install command for rt2800usb Nach dem zweiten Versuch mit "modprobe" gab's keine Fehlermeldung. Nun werden die WLAN-Netze nicht mehr angezeigt. modinfo rt2800usb | egrep '0df6|0041' zeigt nur das Zeichen >
|
elektronenblitz63
Anmeldungsdatum: 16. Januar 2007
Beiträge: 29307
Wohnort: NRW
|
Hallo, sieht so aus als würdest Du Fehler bei der Eingabe machen und die gezeigten Terminalbefehle unvollständig übernehmen. Der senkrechte Strich nennt sich Pipe, trennt Befehle und ist mittels
Alt Gr +
< erreichbar. Inhalt der Konfigurationsdateien?
cat /etc/modprobe.d/rt2800usb.conf
cat /etc/modprobe.d/blacklist.conf
|
Juzer
(Themenstarter)
Anmeldungsdatum: 22. Oktober 2011
Beiträge: 29
|
Hallo, wie dieser senkrechte Strich geht, weiß ich und habe ihn auch richtig gesetzt, meine ich. Hier der Inhalt der Dateien: rt2800usb.conf: install rt2800usb modprobe --ignore-install rt2800usb ; /bin/echo "0df6 0041" > /sys/bus/usb/drivers/rt2800usb/new_id blacklist.conf: # This file lists those modules which we don't want to be loaded by
# alias expansion, usually so some other driver will be loaded for the
# device instead.
# evbug is a debug tool that should be loaded explicitly
blacklist evbug
# these drivers are very simple, the HID drivers are usually preferred
blacklist usbmouse
blacklist usbkbd
# replaced by e100
blacklist eepro100
# replaced by tulip
blacklist de4x5
# causes no end of confusion by creating unexpected network interfaces
blacklist eth1394
# snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much
# hardware on its own (Ubuntu bug #2011, #6810)
blacklist snd_intel8x0m
# Conflicts with dvb driver (which is better for handling this device)
blacklist snd_aw2
# causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306)
blacklist i2c_i801
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
# most apps now use garmin usb driver directly (Ubuntu: #114565)
blacklist garmin_gps
# replaced by asus-laptop (Ubuntu: #184721)
blacklist asus_acpi
# low-quality, just noise when being used for sound playback, causes
# hangs at desktop session start (Ubuntu: #246969)
blacklist snd_pcsp
# ugly and loud noise, getting on everyone's nerves; this should be done by a
# nice pulseaudio bing (Ubuntu: #77010)
blacklist pcspkr
# EDAC driver for amd76x clashes with the agp driver preventing the aperture
# from being initialised (Ubuntu: #297750). Blacklist so that the driver
# continues to build and is installable for the few cases where its
# really needed.
blacklist amd76x_edac
blacklist rt3572sta
|
elektronenblitz63
Anmeldungsdatum: 16. Januar 2007
Beiträge: 29307
Wohnort: NRW
|
OK, das ist soweit alles richtig. Zeige bitte mal die Abfragen direkt nach einem Neustart mit angeschlossenem Stick ohne sonst irgendwelche Eingaben getätigt zu haben.
lsusb
lsmod
ifconfig -a
iwconfig
|
Juzer
(Themenstarter)
Anmeldungsdatum: 22. Oktober 2011
Beiträge: 29
|
xxx@xxx-desktop:~$ lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0df6:0041 Sitecom Europe B.V. WL-329 Wireless Dualband USB adapter 300N
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 15a4:1336 Afatech Technologies, Inc. SDHC/MicroSD/MMC/MS/M2/CF/XD Flash Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
xxx@xxx-desktop:~$ lsmod
Module Size Used by
parport_pc 36959 0
ppdev 17113 0
snd_hda_codec_realtek 336771 1
snd_hda_intel 33176 3
nouveau 682322 2
snd_hda_codec 103804 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 13604 1 snd_hda_codec
snd_pcm 96391 2 snd_hda_intel,snd_hda_codec
ttm 76664 1 nouveau
snd_seq_midi 13324 0
drm_kms_helper 42136 1 nouveau
snd_rawmidi 30486 1 snd_seq_midi
drm 227534 4 nouveau,ttm,drm_kms_helper
snd_seq_midi_event 14899 1 snd_seq_midi
i2c_algo_bit 13400 1 nouveau
video 19438 1 nouveau
snd_seq 61621 2 snd_seq_midi,snd_seq_midi_event
snd_timer 29602 2 snd_pcm,snd_seq
snd_seq_device 14462 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 67382 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
k10temp 13119 0
shpchp 37297 0
i2c_nforce2 13058 0
psmouse 73535 0
soundcore 12680 1 snd
snd_page_alloc 18529 2 snd_hda_intel,snd_pcm
serio_raw 13166 0
edac_core 53845 0
edac_mce_amd 23464 0
lp 17825 0
parport 46458 3 parport_pc,ppdev,lp
usb_storage 53538 0
uas 17996 0
forcedeth 63555 0
ahci 25951 2
libahci 26642 1 ahci
pata_amd 14130 0
xxx@xxx-desktop:~$ ifconfig -a
eth0 Link encap:Ethernet Hardware Adresse 00:25:22:2c:1e:f6
UP BROADCAST MULTICAST MTU:1500 Metrik:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:41 Basisadresse:0xc000
lo Link encap:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine
UP LOOPBACK RUNNING MTU:16436 Metrik:1
RX packets:16 errors:0 dropped:0 overruns:0 frame:0
TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:0
RX bytes:960 (960.0 B) TX bytes:960 (960.0 B)
xxx@xxx-desktop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
|
elektronenblitz63
Anmeldungsdatum: 16. Januar 2007
Beiträge: 29307
Wohnort: NRW
|
Mich irritierte diese Aussage ... Nach dem zweiten Versuch mit "modprobe" gab's keine Fehlermeldung. Nun werden die WLAN-Netze nicht mehr angezeigt.
Da war vermutlich noch der selbst installierte Treiber aktiv. Versuche nun erneut den vorhandenen Systemtreiber zu laden
sudo modprobe rt2800usb
iwconfig
tail -n15 /var/log/messages
dmesg | egrep 'wlan|rt28'
|
Juzer
(Themenstarter)
Anmeldungsdatum: 22. Oktober 2011
Beiträge: 29
|
Wieder die gleiche Geschichte. Nach dem ersten modprobe springt er in den Text-Modus rein und sagt im Terminal "Killed", nach dem zweiten modprobe sagt er nichts: xxx@xxx-desktop:~$ sudo modprobe rt2800usb
[sudo] password for xxx:
Killed
FATAL: Error running install command for rt2800usb
xxx@xxx-desktop:~$ sudo modprobe rt2800usb
xxx@xxx-desktop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
xxx@xxx-desktop:~$ tail -n15 /var/log/messages
tail: „/var/log/messages“ kann nicht zum Lesen geöffnet werden: Datei oder Verzeichnis nicht gefunden
xxx@xxx-desktop:~$ dmesg | egrep 'wlan|rt28'
[ 1918.825450] usbcore: registered new interface driver rt2800usb
[ 1918.827502] last sysfs file: /sys/bus/usb/drivers/rt2800usb/uevent
[ 1918.827531] Modules linked in: rt2800usb rt2800lib crc_ccitt rt2x00usb rt2x00lib mac80211 cfg80211 nls_iso8859_1 nls_cp437 vfat fat parport_pc ppdev snd_hda_codec_realtek snd_hda_intel nouveau snd_hda_codec snd_hwdep snd_pcm ttm snd_seq_midi drm_kms_helper snd_rawmidi drm snd_seq_midi_event i2c_algo_bit video snd_seq snd_timer snd_seq_device snd k10temp shpchp i2c_nforce2 psmouse soundcore snd_page_alloc serio_raw edac_core edac_mce_amd lp parport usb_storage uas forcedeth ahci libahci pata_amd
|
elektronenblitz63
Anmeldungsdatum: 16. Januar 2007
Beiträge: 29307
Wohnort: NRW
|
Vermutlich gibt es grundsätzlich größere Probleme mit Ubuntu 11.04 auf diesem System, da auch das X-System abstürzt. Teste mal Ubuntu 10.04-LTS als Live System von CD oder USB-Stick. Die Anleitung zur Inbetriebnahme funktionierte dort ja einwandfrei. Ansonsten müssen wir die komplette Systemkonfiguration mal näher untersuchen. Möglicherweise liegt es auch an besonderen Einstellungen unter Mint.
|
Juzer
(Themenstarter)
Anmeldungsdatum: 22. Oktober 2011
Beiträge: 29
|
Hab jetzt xubuntu 10.04 LTS installiert. Es klappt wieder nichts. Hier die Befehle mit dem eingesteckten Stick und dem herausgezogenen Kabel. (Übers Kabel funktioniert die Verbindung.) uname -a
Linux xxx-desktop 2.6.32-28-generic #55-Ubuntu SMP Mon Jan 10 23:42:43 UTC 2011 x86_64 GNU/Linux
lspci -nnk | grep -i net -a2
Kernel driver in use: ahci
Kernel modules: ahci
00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP77 Ethernet [10de:0760] (rev a2)
Kernel driver in use: forcedeth
Kernel modules: forcedeth
lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0df6:0041 Sitecom Europe B.V.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 15a4:1336 Afatech Technologies, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubegrep -v "^$|^#" /etc/network/interfaces
auto lo
iface lo inet loopback
egrep -v "^$|^#" /etc/resolv.conf => Keine Ausgabe
egrep -v "^$|^#" /etc/hosts
127.0.0.1 localhost
127.0.1.1 xxx-desktop
::1 localhost ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
cat /etc/udev/rules.d/70-persistent-net.rules
# This file maintains persistent names for network interfaces.
# See udev(7) for syntax.
#
# Entries are automatically added by the 75-persistent-net-generator.rules
# file; however you are also free to add your own entries.
# PCI device 0x10de:0x0760 (forcedeth)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:25:22:2c:1e:f6", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
ping -c 4 www.ubuntuusers.de
ping: unknown host www.ubuntuusers.de
ping -c 4 213.95.41.11
PING 213.95.41.11 (213.95.41.11) 56(84) bytes of data.
iwlist chan
lo no frequency information.
eth0 no frequency information.
sudo iwlist scan
[sudo] password for xxx:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
lsmod
Module Size Used by
snd_hda_codec_realtek 279072 1
fbcon 39270 71
tileblit 2487 1 fbcon
font 8053 1 fbcon
bitblit 5811 1 fbcon
softcursor 1565 1 bitblit
vga16fb 12757 0
vgastate 9857 1 vga16fb
ppdev 6375 0
snd_hda_intel 25741 6
snd_hda_codec 85759 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 6924 1 snd_hda_codec
snd_pcm_oss 41394 0
snd_mixer_oss 16299 3 snd_pcm_oss
snd_pcm 87946 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 1782 0
snd_seq_oss 31191 0
snd_seq_midi 5829 0
snd_rawmidi 23420 1 snd_seq_midi
snd_seq_midi_event 7267 2 snd_seq_oss,snd_seq_midi
nouveau 515227 2
ttm 60847 1 nouveau
snd_seq 57481 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
drm_kms_helper 30742 1 nouveau
snd_timer 23649 2 snd_pcm,snd_seq
snd_seq_device 6888 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
drm 198948 4 nouveau,ttm,drm_kms_helper
i2c_algo_bit 6024 1 nouveau
video 20623 0
output 2503 1 video
snd 71251 20 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse 64576 0
serio_raw 4918 0
shpchp 33711 0
edac_core 45423 0
edac_mce_amd 9278 0
soundcore 8052 3 snd
snd_page_alloc 8500 2 snd_hda_intel,snd_pcm
i2c_nforce2 6099 0
lp 9336 0
parport 37160 2 ppdev,lp
usb_storage 49961 0
pata_amd 11962 0
forcedeth 55624 0
ahci 37870 2
dmesg | egrep 'net|eth|sky|sis|via|3c3|3c5|e100|8139|8169|acx|air|ath|atl|ar9|carl|atme|at7|herm|iwl|ipw|rtl8|r81|rt2|rt3|rt6|rt7|tg3|ssb|wl|b43|b44|ori|pri|p5|zd|ndis|wmi|ns8'
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u524288
[ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.021298] Initializing cgroup subsys net_cls
[ 0.794806] audit: initializing netlink socket (disabled)
[ 0.810794] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.968139] rtc_cmos 00:06: RTC can wake from S4
[ 0.968489] device-mapper: multipath: version 1.1.0 loaded
[ 0.968491] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.021419] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.021756] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
[ 1.021760] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 1.543842] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:25:22:2c:1e:f6
[ 1.543844] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
[ 1.704038] ata8: port disabled. ignoring.
[ 9.049221] Adding 2612216k swap on /dev/sda5. Priority:-1 extents:1 across:2612216k
[ 9.450339] forcedeth 0000:00:0a.0: irq 28 for MSI/MSI-X
[ 9.450530] eth0: no link during initialization.
[ 9.450967] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 63.258045] eth0: link up.
[ 63.258806] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 74.173773] eth0: no IPv6 routers present
[ 146.615804] eth0: link down.
cat /var/lib/NetworkManager/NetworkManager.state
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
|
elektronenblitz63
Anmeldungsdatum: 16. Januar 2007
Beiträge: 29307
Wohnort: NRW
|
Unter 10.04 muss jetzt genau diese Anleitung abgearbeitet werden um das Treibermodul rt2870sta zu aktivieren. Schon ausgeführt?
|
Juzer
(Themenstarter)
Anmeldungsdatum: 22. Oktober 2011
Beiträge: 29
|
Habe ich gemacht, ja. Statt gedit natürlich mousepad benutzt.
|