Ich habe zuhause seit einigen Wochen in 3 Rechnern insgesamt 3x SSD Crucial MX500 mit 1 TB verbaut und lasse natürlich auch die smartmontools laufen. Bei 2 dieser Platten nerven die smartmontolls aber sehr: etwa 1-2x am Tag (manchmal auch nur alle 2 Tage) popt die Meldung "pending sector" auf, schaue ich dann gleich mit smartctl nach ist max 1 Sektor auffällig, wenige Minuten später ist der Wert wieder auf null; also eigentlich ein normales Verhalten: da gab es mal ein Schreibproblem, das sich wieder erledigt hat, die Anzahl geht nicht nach oben, die Reservesektoren werden nicht weniger. Auch ein langer Test zeigt keine Fehler.
Nervig ist, dass in so einer "normalen" Situation überhaupt eine Meldung erscheint, ganz abstellen möchte ich die Meldungen natürlich nicht. Kann man das Verhalten irgendwie steuern?
Danke S.
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.3.0-26-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs Device Model: CT1000MX500SSD1 Serial Number: 1836E14F7CDB LU WWN Device Id: 5 00a075 1e14f7cdb Firmware Version: M3CR022 User Capacity: 1.000.204.886.016 bytes [1,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA >3.2 (0x1ff), 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Jan 19 10:01:42 2020 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0 5 Reallocate_NAND_Blk_Cnt 0x0032 100 100 010 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1402 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 37 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 173 Ave_Block-Erase_Count 0x0032 098 098 000 Old_age Always - 30 174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 5 180 Unused_Reserve_NAND_Blk 0x0033 000 000 000 Pre-fail Always - 42 183 SATA_Interfac_Downshift 0x0032 100 100 000 Old_age Always - 2 184 Error_Correction_Count 0x0032 100 100 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0022 065 036 000 Old_age Always - 35 (Min/Max 0/44) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 621 202 Percent_Lifetime_Remain 0x0030 098 098 001 Old_age Offline - 2 206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0 210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always - 0 246 Total_Host_Sector_Write 0x0032 100 100 000 Old_age Always - 11130550186 247 Host_Program_Page_Count 0x0032 100 100 000 Old_age Always - 180753219 248 FTL_Program_Page_Count 0x0032 100 100 000 Old_age Always - 614644566
Moderiert von kB:
Aus dem Forum „Sicherheit“ in besser passendes Forum verschoben. Bitte beachte die als „wichtig“ markierten Themen („Welche Themen gehören hier her und welche nicht?“) im jeweiligen Forum! Danke.