Hi,
folgendes (für mich unverständliches) Problem besteht: Unter 8.10 funktionierte zumindest meine Realtek ALC883 Onboard Karte, nun nach dem Upgrade auf 9.04 funktioniert diese nichtmehr obwohl (so sieht es für mich aus) alle gebrauchten Module geladen werden. Ich besitze 2 installierte Karten → Onboard Realtek HDA ALC883 und Sound Blaster Audigy SE welche normalerweise mit CA0106 auf anhieb laufen sollte.
Nun mal noch zwei Ausgaben ...
DMesg
root@DarkSpherePC:~# dmesg
[ 0.000000] BIOS EBDA/lowmem at: 0009f000/0009f000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-4-generic (buildd@palmer) (gcc version 4.3.3 20081217 (prerelease) (Ubuntu 4.3.2-2ubuntu9) ) #5-Ubuntu SMP Fri Dec 26 22:48:51 UTC 2008 (Ubuntu 2.6.28-4.5-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffe0000 (usable)
[ 0.000000] BIOS-e820: 000000007ffe0000 - 000000007ffe3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffe3000 - 000000007fff0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.5 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x7ffe0 max_arch_pfn = 0x100000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable)
[ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007ffe0000 (usable)
[ 0.000000] modified: 000000007ffe0000 - 000000007ffe3000 (ACPI NVS)
[ 0.000000] modified: 000000007ffe3000 - 000000007fff0000 (ACPI data)
[ 0.000000] modified: 000000007fff0000 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 37893000 - 37fefd69
[ 0.000000] Allocated new RAMDISK: 00852000 - 00faed69
[ 0.000000] Move RAMDISK from 0000000037893000 - 0000000037fefd68 to 00852000 - 00faed68
[ 0.000000] ACPI: RSDP 000F7C10, 0024 (r2 FSC )
[ 0.000000] ACPI: RSDT 7FFE3040, 003C (r1 FSC PC 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 7FFE30C0, 0074 (r1 FSC PC 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 7FFE3180, 4999 (r1 FSC AWRDACPI 1000 MSFT 3000000)
[ 0.000000] ACPI: FACS 7FFE0000, 0040
[ 0.000000] ACPI: SSDT 7FFE7C40, 030E (r1 PTLTD POWERNOW 1 LTP 1)
[ 0.000000] ACPI: HPET 7FFE7FC0, 0038 (r1 FSC PC 42302E31 AWRD 98)
[ 0.000000] ACPI: SLIC 7FFE8040, 0176 (r1 FSC PC 42302E31 AWRD 1)
[ 0.000000] ACPI: MCFG 7FFE8200, 003C (r1 FSC PC 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC 7FFE7B80, 0068 (r1 FSC PC 42302E31 AWRD 0)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1163MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) =⇒ bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page =⇒ [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE =⇒ [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE =⇒ [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000084d62c] TEXT DATA BSS =⇒ [0000100000 - 000084d62c]
[ 0.000000] #4 [000084e000 - 0000852000] INIT_PG_TABLE =⇒ [000084e000 - 0000852000]
[ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved =⇒ [000009f000 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE =⇒ [0000010000 - 0000012000]
[ 0.000000] #7 [0000852000 - 0000faed69] NEW RAMDISK =⇒ [0000852000 - 0000faed69]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP =⇒ [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00f3d10] 000f3d10
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 → 0x00001000
[ 0.000000] Normal 0x00001000 → 0x000373fe
[ 0.000000] HighMem 0x000373fe → 0x0007ffe0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 → 0x0000009f
[ 0.000000] 0: 0x00000100 → 0x0007ffe0
[ 0.000000] On node 0 totalpages: 524143
[ 0.000000] free_area_init_node: node 0, pgdat c06a0b80, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2328 pages used for memmap
[ 0.000000] HighMem zone: 295626 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520047
[ 0.000000] Kernel command line: root=UUID=8bd6f1a3-f984-4657-bfa3-6a7770629d10 ro quiet vga=792
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2999.752 MHz processor.
[ 0.004000] Console: colour dummy device 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 10484800 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 2053068k/2097024k available (4011k kernel code, 42608k reserved, 2132k data, 520k init, 1191816k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0707000 - 0xc0789000 ( 520 kB)
[ 0.004000] .data : 0xc04eadef - 0xc06ffe60 (2132 kB)
[ 0.004000] .text : 0xc0100000 - 0xc04eadef (4011 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.50 BogoMIPS (lpj=11999008)
[ 0.004020] Security Framework initialized
[ 0.004025] SELinux: Disabled at boot.
[ 0.004035] AppArmor: AppArmor initialized
[ 0.004040] Mount-cache hash table entries: 512
[ 0.004135] Initializing cgroup subsys ns
[ 0.004137] Initializing cgroup subsys cpuacct
[ 0.004139] Initializing cgroup subsys memory
[ 0.004142] Initializing cgroup subsys freezer
[ 0.004150] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004152] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004153] CPU: Physical Processor ID: 0
[ 0.004154] CPU: Processor Core ID: 0
[ 0.004156] using C1E aware idle routine
[ 0.004164] Checking 'hlt' instruction... OK.
[ 0.021233] ACPI: Core revision 20080926
[ 0.022477] ACPI: Checking initramfs for custom DSDT
[ 0.240588] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.284183] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[ 0.288001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5999.23 BogoMIPS (lpj=11998475)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.372138] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[ 0.372178] Brought up 2 CPUs
[ 0.372180] Total of 2 processors activated (11998.74 BogoMIPS).
[ 0.372280] CPU0 attaching sched-domain:
[ 0.372281] domain 0: span 0-1 level CPU
[ 0.372283] groups: 0 1
[ 0.372287] CPU1 attaching sched-domain:
[ 0.372288] domain 0: span 0-1 level CPU
[ 0.372290] groups: 1 0
[ 0.372332] net_namespace: 776 bytes
[ 0.372332] Booting paravirtualized kernel on bare hardware
[ 0.372332] Time: 15:17:09 Date: 12/31/08
[ 0.372332] regulator: core version 0.5
[ 0.372332] NET: Registered protocol family 16
[ 0.372332] EISA bus registered
[ 0.372332] ACPI: bus type pci registered
[ 0.372332] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.372332] PCI: MCFG area at e0000000 reserved in E820
[ 0.372332] PCI: Using MMCONFIG for extended config space
[ 0.372332] PCI: Using configuration type 1 for base access
[ 0.372397] ACPI: EC: Look up EC in DSDT
[ 0.380489] ACPI: Interpreter enabled
[ 0.380493] ACPI: (supports S0 S1 S4 S5)
[ 0.380509] ACPI: Using IOAPIC for interrupt routing
[ 0.384131] ACPI: No dock devices found.
[ 0.384131] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.384131] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.384131] pci 0000:00:02.0: PME# disabled
[ 0.384131] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.384131] pci 0000:00:07.0: PME# disabled
[ 0.384131] pci 0000:00:12.0: reg 10 io port: [0xff00-0xff07]
[ 0.384131] pci 0000:00:12.0: reg 14 io port: [0xfe00-0xfe03]
[ 0.384131] pci 0000:00:12.0: reg 18 io port: [0xfd00-0xfd07]
[ 0.384131] pci 0000:00:12.0: reg 1c io port: [0xfc00-0xfc03]
[ 0.384131] pci 0000:00:12.0: reg 20 io port: [0xfb00-0xfb0f]
[ 0.384131] pci 0000:00:12.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff]
[ 0.384148] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.384173] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff]
[ 0.384221] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.384269] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe02c000-0xfe02cfff]
[ 0.384318] pci 0000:00:13.3: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
[ 0.384365] pci 0000:00:13.4: reg 10 32bit mmio: [0xfe02a000-0xfe02afff]
[ 0.384431] pci 0000:00:13.5: reg 10 32bit mmio: [0xfe029000-0xfe0290ff]
[ 0.384467] pci 0000:00:13.5: supports D1 D2
[ 0.384468] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.384471] pci 0000:00:13.5: PME# disabled
[ 0.384512] pci 0000:00:14.0: reg 10 io port: [0xfa00-0xfa0f]
[ 0.384567] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.384572] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.384579] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.384585] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.384591] pci 0000:00:14.1: reg 20 io port: [0xf900-0xf90f]
[ 0.384637] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe020000-0xfe023fff]
[ 0.384669] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.384672] pci 0000:00:14.2: PME# disabled
[ 0.384817] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.384824] pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xdfffffff]
[ 0.384832] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
[ 0.384836] pci 0000:01:00.0: reg 24 io port: [0xdf00-0xdf7f]
[ 0.384841] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.384892] pci 0000:00:02.0: bridge io port: [0xd000-0xdfff]
[ 0.384895] pci 0000:00:02.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.384898] pci 0000:00:02.0: bridge 64bit mmio pref: [0xc0000000-0xdfffffff]
[ 0.384937] pci 0000:02:00.0: reg 10 io port: [0xee00-0xeeff]
[ 0.384952] pci 0000:02:00.0: reg 18 64bit mmio: [0xfddff000-0xfddfffff]
[ 0.384968] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.384977] pci 0000:02:00.0: supports D1 D2
[ 0.384979] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.384982] pci 0000:02:00.0: PME# disabled
[ 0.385032] pci 0000:00:07.0: bridge io port: [0xe000-0xefff]
[ 0.385034] pci 0000:00:07.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[ 0.385037] pci 0000:00:07.0: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff]
[ 0.385076] pci 0000:03:01.0: reg 10 io port: [0xcf00-0xcf1f]
[ 0.385122] pci 0000:03:01.0: supports D1 D2
[ 0.385174] pci 0000:00:14.4: transparent bridge
[ 0.385177] pci 0000:00:14.4: bridge io port: [0xc000-0xcfff]
[ 0.385181] pci 0000:00:14.4: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
[ 0.385185] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfde00000-0xfdefffff]
[ 0.385195] bus 00 → node 0
[ 0.385200] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.385432] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.385547] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.385619] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[ 0.396685] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.396685] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.396685] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.396685] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.396685] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.400056] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.400134] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.400212] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.400246] ACPI: WMI: Mapper loaded
[ 0.400246] SCSI subsystem initialized
[ 0.400246] libata version 3.00 loaded.
[ 0.400246] usbcore: registered new interface driver usbfs
[ 0.400246] usbcore: registered new interface driver hub
[ 0.400246] usbcore: registered new device driver usb
[ 0.400246] PCI: Using ACPI for IRQ routing
[ 0.408007] Bluetooth: Core ver 2.13
[ 0.408032] NET: Registered protocol family 31
[ 0.408033] Bluetooth: HCI device and connection manager initialized
[ 0.408035] Bluetooth: HCI socket layer initialized
[ 0.408037] NET: Registered protocol family 8
[ 0.408038] NET: Registered protocol family 20
[ 0.408047] NetLabel: Initializing
[ 0.408047] NetLabel: domain hash size = 128
[ 0.408047] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.408047] NetLabel: unlabeled traffic allowed by default
[ 0.408047] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.408047] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.412047] AppArmor: AppArmor Filesystem Enabled
[ 0.416013] Switched to high resolution mode on CPU 0
[ 0.416190] Switched to high resolution mode on CPU 1
[ 0.420013] pnp: PnP ACPI init
[ 0.420018] ACPI: bus type pnp registered
[ 0.422179] pnp: PnP ACPI: found 11 devices
[ 0.422180] ACPI: ACPI bus type pnp unregistered
[ 0.422182] PnPBIOS: Disabled by ACPI PNP
[ 0.422188] system 00:01: ioport range 0x4100-0x411f has been reserved
[ 0.422190] system 00:01: ioport range 0x228-0x22f has been reserved
[ 0.422192] system 00:01: ioport range 0x40b-0x40b has been reserved
[ 0.422193] system 00:01: ioport range 0x4d6-0x4d6 has been reserved
[ 0.422195] system 00:01: ioport range 0xc00-0xc01 has been reserved
[ 0.422197] system 00:01: ioport range 0xc14-0xc14 has been reserved
[ 0.422198] system 00:01: ioport range 0xc50-0xc52 has been reserved
[ 0.422200] system 00:01: ioport range 0xc6c-0xc6d has been reserved
[ 0.422202] system 00:01: ioport range 0xc6f-0xc6f has been reserved
[ 0.422203] system 00:01: ioport range 0xcd0-0xcd1 has been reserved
[ 0.422205] system 00:01: ioport range 0xcd2-0xcd3 has been reserved
[ 0.422207] system 00:01: ioport range 0xcd4-0xcdf has been reserved
[ 0.422209] system 00:01: ioport range 0x4000-0x40fe has been reserved
[ 0.422210] system 00:01: ioport range 0x4210-0x4217 has been reserved
[ 0.422212] system 00:01: ioport range 0xb10-0xb1f has been reserved
[ 0.422217] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.422219] system 00:07: ioport range 0x220-0x225 has been reserved
[ 0.422221] system 00:07: ioport range 0xb00-0xb0f has been reserved
[ 0.422225] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.422228] system 00:0a: iomem range 0xf0000-0xfffff could not be reserved
[ 0.422230] system 00:0a: iomem range 0xfed00000-0xfed000ff has been reserved
[ 0.422232] system 00:0a: iomem range 0x7ffe0000-0x7fffffff could not be reserved
[ 0.422234] system 00:0a: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.422236] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 0.422238] system 00:0a: iomem range 0x100000-0x7ffdffff could not be reserved
[ 0.422240] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.422242] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.422244] system 00:0a: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.457256] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.457258] pci 0000:00:02.0: IO window: 0xd000-0xdfff
[ 0.457260] pci 0000:00:02.0: MEM window: 0xf8000000-0xfbffffff
[ 0.457263] pci 0000:00:02.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff
[ 0.457266] pci 0000:00:07.0: PCI bridge, secondary bus 0000:02
[ 0.457267] pci 0000:00:07.0: IO window: 0xe000-0xefff
[ 0.457270] pci 0000:00:07.0: MEM window: 0xfdd00000-0xfddfffff
[ 0.457272] pci 0000:00:07.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
[ 0.457274] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
[ 0.457277] pci 0000:00:14.4: IO window: 0xc000-0xcfff
[ 0.457282] pci 0000:00:14.4: MEM window: 0xfdf00000-0xfdffffff
[ 0.457285] pci 0000:00:14.4: PREFETCH window: 0x000000fde00000-0x000000fdefffff
[ 0.457295] pci 0000:00:02.0: setting latency timer to 64
[ 0.457299] pci 0000:00:07.0: setting latency timer to 64
[ 0.457304] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.457306] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.457307] bus: 01 index 0 io port: [0xd000-0xdfff]
[ 0.457309] bus: 01 index 1 mmio: [0xf8000000-0xfbffffff]
[ 0.457310] bus: 01 index 2 mmio: [0xc0000000-0xdfffffff]
[ 0.457312] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.457313] bus: 02 index 0 io port: [0xe000-0xefff]
[ 0.457314] bus: 02 index 1 mmio: [0xfdd00000-0xfddfffff]
[ 0.457316] bus: 02 index 2 mmio: [0xfdc00000-0xfdcfffff]
[ 0.457317] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.457319] bus: 03 index 0 io port: [0xc000-0xcfff]
[ 0.457320] bus: 03 index 1 mmio: [0xfdf00000-0xfdffffff]
[ 0.457322] bus: 03 index 2 mmio: [0xfde00000-0xfdefffff]
[ 0.457323] bus: 03 index 3 io port: [0x00-0xffff]
[ 0.457324] bus: 03 index 4 mmio: [0x000000-0xffffffff]
[ 0.457331] NET: Registered protocol family 2
[ 0.472044] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.472233] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.472763] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.472996] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.472998] TCP reno registered
[ 0.480067] NET: Registered protocol family 1
[ 0.480159] checking if image is initramfs... it is
[ 0.896369] Freeing initrd memory: 7539k freed
[ 0.897051] alg: cipher: Test 1 failed on encryption for aes-asm
[ 0.897057] 00000000: 00 01 02 03 04 05 06 07 08 08 08 08 08 08 08 08
[ 0.897259] audit: initializing netlink socket (disabled)
[ 0.897272] type=2000 audit(1230736627.896:1): initialized
[ 0.902822] highmem bounce pool size: 64 pages
[ 0.902825] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.904663] VFS: Disk quotas dquot_6.5.1
[ 0.904726] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.905479] msgmni has been set to 1698
[ 0.905682] alg: No test for stdrng (krng)
[ 0.905692] io scheduler noop registered
[ 0.905694] io scheduler anticipatory registered
[ 0.905695] io scheduler deadline registered
[ 0.905705] io scheduler cfq registered (default)
[ 1.044049] pci 0000:01:00.0: Boot video device
[ 1.046159] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 1.046175] pcieport-driver 0000:00:02.0: found MSI capability
[ 1.046189] pcieport-driver 0000:00:02.0: irq 2303 for MSI/MSI-X
[ 1.046194] pci_express 0000:00:02.0:pcie00: allocate port service
[ 1.046233] pci_express 0000:00:02.0:pcie03: allocate port service
[ 1.046291] pcieport-driver 0000:00:07.0: setting latency timer to 64
[ 1.046306] pcieport-driver 0000:00:07.0: found MSI capability
[ 1.046316] pcieport-driver 0000:00:07.0: irq 2302 for MSI/MSI-X
[ 1.046321] pci_express 0000:00:07.0:pcie00: allocate port service
[ 1.046352] pci_express 0000:00:07.0:pcie03: allocate port service
[ 1.046453] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.046477] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.046673] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.046675] ACPI: Power Button (FF) [PWRF]
[ 1.046725] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.046727] ACPI: Power Button (CM) [PWRB]
[ 1.046802] fan PNP0C0B:00: registered as cooling_device0
[ 1.046805] ACPI: Fan [FAN] (on)
[ 1.047045] processor ACPI_CPU:00: registered as cooling_device1
[ 1.047089] processor ACPI_CPU:01: registered as cooling_device2
[ 1.048621] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.048808] ACPI: Thermal Zone [THRM] (31 C)
[ 1.048903] isapnp: Scanning for PnP cards...
[ 1.402624] isapnp: No Plug & Play device found
[ 1.409253] Linux agpgart interface v0.103
[ 1.409675] [drm] Initialized drm 1.1.0 20060810
[ 1.409678] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.409801] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.410213] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.411533] brd: module loaded
[ 1.412100] loop: module loaded
[ 1.412213] Fixed MDIO Bus: probed
[ 1.412216] PPP generic driver version 2.4.2
[ 1.412301] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.412334] Driver 'sd' needs updating - please use bus_type methods
[ 1.412354] Driver 'sr' needs updating - please use bus_type methods
[ 1.412485] usbcore: registered new interface driver libusual
[ 1.412534] usbcore: registered new interface driver usbserial
[ 1.412558] USB Serial support registered for generic
[ 1.412580] usbcore: registered new interface driver usbserial_generic
[ 1.412582] usbserial: USB Serial Driver core
[ 1.412670] PNP: No PS/2 controller found. Probing ports directly.
[ 1.413024] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.413027] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.417102] mice: PS/2 mouse device common for all mice
[ 1.429102] rtc_cmos 00:04: RTC can wake from S4
[ 1.429152] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.429189] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.429281] device-mapper: uevent: version 1.0.3
[ 1.429398] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 1.429525] device-mapper: multipath: version 1.0.5 loaded
[ 1.429527] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.429660] EISA: Probing bus 0 at eisa.0
[ 1.429678] Cannot allocate resource for EISA slot 4
[ 1.429693] EISA: Detected 0 cards.
[ 1.429765] cpuidle: using governor ladder
[ 1.429766] cpuidle: using governor menu
[ 1.430160] TCP cubic registered
[ 1.430270] NET: Registered protocol family 10
[ 1.430531] lo: Disabled Privacy Extensions
[ 1.430727] NET: Registered protocol family 17
[ 1.430765] Bluetooth: L2CAP ver 2.11
[ 1.430766] Bluetooth: L2CAP socket layer initialized
[ 1.430768] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.430769] Bluetooth: SCO socket layer initialized
[ 1.430795] Bluetooth: RFCOMM socket layer initialized
[ 1.430798] Bluetooth: RFCOMM TTY layer initialized
[ 1.430799] Bluetooth: RFCOMM ver 1.10
[ 1.430815] Using IPI No-Shortcut mode
[ 1.430928] registered taskstats version 1
[ 1.431011] Magic number: 4:677:286
[ 1.431014] ppp ppp: hash matches
[ 1.431079] rtc_cmos 00:04: setting system clock to 2008-12-31 15:17:10 UTC (1230736630)
[ 1.431081] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.431082] EDD information not available.
[ 1.431402] Freeing unused kernel memory: 520k freed
[ 1.431497] Write protecting the kernel text: 4012k
[ 1.431530] Write protecting the kernel read-only data: 1488k
[ 1.472076] vesafb: framebuffer at 0xf9000000, mapped to 0xf7d00000, using 6144k, total 14336k
[ 1.472079] vesafb: mode is 1024x768x32, linelength=4096, pages=1
[ 1.472081] vesafb: protected mode interface info at c000:b1c0
[ 1.472082] vesafb: pmi: set display start = c00cb223, set palette = c00cb27e
[ 1.472084] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[ 1.472093] vesafb: scrolling: redraw
[ 1.472095] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.472217] Console: switching to colour frame buffer device 128x48
[ 1.485040] fb0: VESA VGA frame buffer device
[ 1.543029] fuse init (API version 7.10)
[ 1.730799] ahci 0000:00:12.0: version 3.0
[ 1.730825] ahci 0000:00:12.0: PCI INT A → GSI 16 (level, low) → IRQ 16
[ 1.730883] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 1.730977] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.730980] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part
[ 1.733122] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.733145] r8169 0000:02:00.0: PCI INT A → GSI 19 (level, low) → IRQ 19
[ 1.733160] r8169 0000:02:00.0: setting latency timer to 64
[ 1.733235] r8169 0000:02:00.0: irq 2301 for MSI/MSI-X
[ 1.733644] eth0: RTL8168b/8111b at 0xf7c46000, 00:1b:b9:fa:f5:de, XID 38000000 IRQ 2301
[ 1.739636] scsi0 : ahci
[ 1.739654] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.739756] scsi1 : ahci
[ 1.739792] scsi2 : ahci
[ 1.739826] scsi3 : ahci
[ 1.739890] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 16
[ 1.739893] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 16
[ 1.739896] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 16
[ 1.739899] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 16
[ 1.765020] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.765023] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 2.220018] ata1: softreset failed (device not ready)
[ 2.220151] ata1: failed due to HW bug, retry pmp=0
[ 2.384030] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.414710] ata1.00: ATA-8: WDC WD5000AAKS-07YGA0, 12.01C02, max UDMA/133
[ 2.414712] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.414725] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.415560] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.415563] ata1.00: configured for UDMA/133
[ 2.912021] ata2: softreset failed (device not ready)
[ 2.912147] ata2: failed due to HW bug, retry pmp=0
[ 3.076024] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.078556] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H60N, CV02, max UDMA/100
[ 3.078568] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.082290] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.082291] ata2.00: configured for UDMA/100
[ 3.528031] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.864030] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.880084] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[ 3.880165] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 3.880175] sd 0:0:0:0: [sda] Write Protect is off
[ 3.880177] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.880190] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.880240] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 3.880247] sd 0:0:0:0: [sda] Write Protect is off
[ 3.880249] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.880261] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.880263] sda: sda1 sda2
[ 3.888033] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.888073] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.890899] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H60N CV02 PQ: 0 ANSI: 5
[ 4.226354] sr0: scsi3-mmc drive: 14x/14x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.226357] Uniform CD-ROM driver Revision: 3.20
[ 4.226409] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.226437] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.226628] ohci_hcd 0000:00:13.0: PCI INT A → GSI 16 (level, low) → IRQ 16
[ 4.226667] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 4.226737] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 4.226753] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
[ 4.284081] usb usb1: configuration #1 chosen from 1 choice
[ 4.284103] hub 1-0:1.0: USB hub found
[ 4.284112] hub 1-0:1.0: 2 ports detected
[ 4.284210] ehci_hcd 0000:00:13.5: PCI INT D → GSI 19 (level, low) → IRQ 19
[ 4.284242] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 4.284282] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 2
[ 4.284304] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 4.284320] ehci_hcd 0000:00:13.5: debug port 1
[ 4.284344] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
[ 4.296013] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 4.296049] usb usb2: configuration #1 chosen from 1 choice
[ 4.296066] hub 2-0:1.0: USB hub found
[ 4.296071] hub 2-0:1.0: 10 ports detected
[ 4.296174] pata_atiixp 0000:00:14.1: PCI INT A → GSI 16 (level, low) → IRQ 16
[ 4.296368] scsi4 : pata_atiixp
[ 4.296427] scsi5 : pata_atiixp
[ 4.297156] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 4.297158] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 4.485035] ata5.01: ATA-6: ST3200021A, 3.01, max UDMA/100
[ 4.485038] ata5.01: 390721968 sectors, multi 16: LBA48
[ 4.500619] ata5.01: configured for UDMA/100
[ 4.656110] scsi 4:0:1:0: Direct-Access ATA ST3200021A 3.01 PQ: 0 ANSI: 5
[ 4.657517] sd 4:0:1:0: [sdb] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
[ 4.657529] sd 4:0:1:0: [sdb] Write Protect is off
[ 4.657530] sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.657544] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.657587] sd 4:0:1:0: [sdb] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
[ 4.657595] sd 4:0:1:0: [sdb] Write Protect is off
[ 4.657596] sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.657609] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.657611] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 >
[ 4.691280] sd 4:0:1:0: [sdb] Attached SCSI disk
[ 4.691318] sd 4:0:1:0: Attached scsi generic sg2 type 0
[ 4.691366] ohci_hcd 0000:00:13.1: PCI INT B → GSI 17 (level, low) → IRQ 17
[ 4.691397] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 4.691457] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 4.691485] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
[ 4.748056] usb usb3: configuration #1 chosen from 1 choice
[ 4.748076] hub 3-0:1.0: USB hub found
[ 4.748085] hub 3-0:1.0: 2 ports detected
[ 4.748296] ohci_hcd 0000:00:13.2: PCI INT C → GSI 18 (level, low) → IRQ 18
[ 4.748310] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 4.748342] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 4.748362] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
[ 4.808046] usb usb4: configuration #1 chosen from 1 choice
[ 4.808064] hub 4-0:1.0: USB hub found
[ 4.808072] hub 4-0:1.0: 2 ports detected
[ 4.808284] ohci_hcd 0000:00:13.3: PCI INT B → GSI 17 (level, low) → IRQ 17
[ 4.808303] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 4.808336] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 4.808348] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
[ 4.833033] usb 2-5: new high speed USB device using ehci_hcd and address 5
[ 4.868094] usb usb5: configuration #1 chosen from 1 choice
[ 4.868120] hub 5-0:1.0: USB hub found
[ 4.868128] hub 5-0:1.0: 2 ports detected
[ 4.868205] ohci_hcd 0000:00:13.4: PCI INT C → GSI 18 (level, low) → IRQ 18
[ 4.868235] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 4.868272] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 4.868287] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
[ 4.928086] usb usb6: configuration #1 chosen from 1 choice
[ 4.928109] hub 6-0:1.0: USB hub found
[ 4.928119] hub 6-0:1.0: 2 ports detected
[ 5.054656] usb 2-5: configuration #1 chosen from 1 choice
[ 5.059200] Initializing USB Mass Storage driver...
[ 5.059380] scsi6 : SCSI emulation for USB Mass Storage devices
[ 5.059434] usbcore: registered new interface driver usb-storage
[ 5.059436] USB Mass Storage support registered.
[ 5.059509] usb-storage: device found at 5
[ 5.059510] usb-storage: waiting for device to settle before scanning
[ 5.239420] PM: Starting manual resume from disk
[ 5.239423] PM: Resume from partition 8:21
[ 5.239424] PM: Checking hibernation image.
[ 5.239602] PM: Resume from disk failed.
[ 5.267052] kjournald starting. Commit interval 5 seconds
[ 5.267059] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.320020] usb 1-2: new full speed USB device using ohci_hcd and address 2
[ 5.489111] usb 1-2: configuration #1 chosen from 1 choice
[ 6.120020] usb 3-1: new low speed USB device using ohci_hcd and address 2
[ 6.289132] usb 3-1: configuration #1 chosen from 1 choice
[ 6.552018] usb 3-2: new low speed USB device using ohci_hcd and address 3
[ 6.719130] usb 3-2: configuration #1 chosen from 1 choice
[ 8.457235] udevd version 124 started
[ 8.711229] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.236992] Linux video capture interface: v2.00
[ 9.274037] gspca: main v2.3.0 registered
[ 9.275076] gspca: probing 093a:2468
[ 9.278334] pac207: Pixart Sensor ID 0x27 Chips ID 0x00
[ 9.278336] pac207: Pixart PAC207BCA Image Processor and Control Chip detected (vid/pid 0x093A:0x2468)
[ 9.278403] usbcore: registered new interface driver hiddev
[ 9.283250] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input3
[ 9.286081] gspca: probe ok
[ 9.286093] usbcore: registered new interface driver pac207
[ 9.286095] pac207: registered
[ 9.317116] generic-usb 0003:062A:0201.0001: input,hidraw0: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:13.1-1/input0
[ 9.324487] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.1/input/input4
[ 9.369117] generic-usb 0003:062A:0201.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:13.1-1/input1
[ 9.373249] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/input/input5
[ 9.405088] generic-usb 0003:046D:C018.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.1-2/input0
[ 9.405108] usbcore: registered new interface driver usbhid
[ 9.405110] usbhid: v2.6:USB HID core driver
[ 9.469523] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xfa00, revision 0
[ 9.706159] HDA Intel 0000:00:14.2: PCI INT A → GSI 16 (level, low) → IRQ 16
[ 9.730970] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 9.782455] CA0106 0000:03:01.0: PCI INT A → GSI 21 (level, low) → IRQ 21
[ 9.782486] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102
[ 9.857456] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 10.057647] usb-storage: device scan complete
[ 10.088174] scsi 6:0:0:0: Direct-Access Generic 2.0 Reader -0 1.20 PQ: 0 ANSI: 0 CCS
[ 10.118659] scsi 6:0:0:1: Direct-Access Generic 2.0 Reader -1 1.20 PQ: 0 ANSI: 0 CCS
[ 10.149176] scsi 6:0:0:2: Direct-Access Generic 2.0 Reader -2 1.20 PQ: 0 ANSI: 0 CCS
[ 10.179663] scsi 6:0:0:3: Direct-Access Generic 2.0 Reader -3 1.20 PQ: 0 ANSI: 0 CCS
[ 10.210166] scsi 6:0:0:4: Direct-Access Generic 2.0 Reader -4 1.20 PQ: 0 ANSI: 0 CCS
[ 10.212462] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 10.212507] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 10.215818] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[ 10.215847] sd 6:0:0:1: Attached scsi generic sg4 type 0
[ 10.218308] sd 6:0:0:2: [sde] Attached SCSI removable disk
[ 10.218349] sd 6:0:0:2: Attached scsi generic sg5 type 0
[ 10.219599] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[ 10.219625] sd 6:0:0:3: Attached scsi generic sg6 type 0
[ 10.221111] sd 6:0:0:4: [sdg] Attached SCSI removable disk
[ 10.221149] sd 6:0:0:4: Attached scsi generic sg7 type 0
[ 10.480041] lp: driver loaded but no devices found
[ 10.549642] Adding 2441840k swap on /dev/sdb5. Priority:-1 extents:1 across:2441840k
[ 10.896883] EXT3 FS on sdb6, internal journal
[ 11.422462] kjournald starting. Commit interval 5 seconds
[ 11.422724] EXT3 FS on sdb7, internal journal
[ 11.422728] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.044929] type=1505 audit(1230736641.733:2): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2758
[ 13.045108] type=1505 audit(1230736641.737:3): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2758
[ 13.078639] type=1505 audit(1230736641.768:4): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=2762
[ 13.113318] type=1505 audit(1230736641.804:5): operation="profile_load" name="/usr/sbin/mysqld-akonadi" name2="default" pid=2766
[ 15.531294] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
[ 15.531354] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x8
[ 15.531357] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0xa
[ 15.531358] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xc
[ 15.531360] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xe
[ 15.531361] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0x10
[ 15.531362] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10
[ 15.531364] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10
[ 15.531365] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12
[ 16.467348] warning: avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 18.500022] Clocksource tsc unstable (delta = -146792599 ns)
[ 19.070316] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 19.070324] apm: disabled - APM is not SMP safe.
[ 19.535726] ppdev: user-space parallel port driver
[ 19.558790] cpufreqd[3544]: segfault at 1c ip b7f1e346 sp bf9c5b68 error 4 in libsysfs.so.2.0.1[b7f19000+a000]
[ 23.116667] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.116673] Bluetooth: BNEP filters: protocol multicast
[ 23.165158] Bridge firewalling registered
[ 27.432324] r8169: eth0: link up
[ 27.432336] r8169: eth0: link up
[ 37.660018] eth0: no IPv6 routers present
[ 67.907465] type=1503 audit(1230736696.597:6): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=1000 name="/etc/mysql/my.cnf" pid=4365 profile="/usr/sbin/mysqld-akonadi"
'''lsmod'''
root@DarkSpherePC:~# lsmod
Module Size Used by
bridge 56212 0
stp 10500 1 bridge
bnep 20352 2
ppdev 15492 0
video 25232 0
output 11008 1 video
powernow_k8 22148 1
parport_pc 40100 0
lp 17156 0
parport 42220 3 ppdev,parport_pc,lp
joydev 18368 0
psmouse 61844 0
serio_raw 13316 0
pcspkr 10496 0
snd_ca0106 39968 0
k8temp 12416 0
snd_hda_intel 422708 0
snd_seq_midi 14336 0
snd_seq_midi_event 15104 1 snd_seq_midi
snd_seq 56880 2 snd_seq_midi,snd_seq_midi_event
snd_rawmidi 29696 2 snd_ca0106,snd_seq_midi
snd_seq_device 14988 3 snd_seq_midi,snd_seq,snd_rawmidi
snd_ac97_codec 112292 1 snd_ca0106
snd_pcm 82820 3 snd_ca0106,snd_hda_intel,snd_ac97_codec
snd_timer 29704 2 snd_seq,snd_pcm
ac97_bus 9856 1 snd_ac97_codec
snd 62628 8 snd_ca0106,snd_hda_intel,snd_seq,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer
soundcore 15200 1 snd
snd_page_alloc 16904 3 snd_ca0106,snd_hda_intel,snd_pcm
i2c_piix4 17424 0
usbhid 42336 0
gspca_pac207 14592 0
gspca_main 30080 1 gspca_pac207
videodev 41472 1 gspca_main
v4l1_compat 21764 1 videodev
shpchp 40212 0
usb_storage 81984 0
pata_acpi 12160 0
ata_generic 12932 0
pata_atiixp 12800 4
ehci_hcd 44172 0
ohci_hcd 32016 0
r8169 40836 0
mii 13312 1 r8169
ahci 37516 0
fuse 60060 1
vesafb 13828 1
fbcon 46112 71
tileblit 10752 1 fbcon
font 16384 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit
Ich hoffe mal das mir Noob einer weiterhelfen kann
Grüsse, Dark