ubuntuusers.de

Kellerkind_2009 schrieb:

Also,zuerst die beiden Falschen Einträge raus

sudo -H gedit /etc/pulse/default.pa

unten dann die beiden entfernen

load-module module-detect
load-module module-detect

Speichern.Danach mal

rm -r ~/.pulse ~/.asound* ; rm -r ~/.pulse-cookie ; rm -r ~/.config/pulse ; rm -r ~/.cache/*sound-cache* ; rm -r ~/.gconf/system/pulseaudio

dann

pulseaudio -k

Läuft Ton? Wenn ja neustart und Testen aber nichts machen wenn kein Ton!!

Gruß Stephan

Jetzt klarer? 😉

Ok, alles klar. Zuerst habe ich die beiden Einträge

load-module module-detect
load-module module-detect

entfernt und gespeichert.

Dann gab es wohl Probleme, weil Dateien oder Verzeichnisse nicht gefunden wurden ...

martin@martin-ub:~$ rm -r ~/.pulse ~/.asound* ; rm -r ~/.pulse-cookie ; rm -r ~/.config/pulse ; rm -r ~/.cache/*sound-cache* ; rm -r ~/.gconf/system/pulseaudio
rm: das Entfernen von '/home/martin/.pulse' ist nicht möglich: Datei oder Verzeichnis nicht gefunden
rm: das Entfernen von '/home/martin/.asound*' ist nicht möglich: Datei oder Verzeichnis nicht gefunden
rm: das Entfernen von '/home/martin/.pulse-cookie' ist nicht möglich: Datei oder Verzeichnis nicht gefunden
rm: das Entfernen von '/home/martin/.gconf/system/pulseaudio' ist nicht möglich: Datei oder Verzeichnis nicht gefunden

Dann

pulseaudio -k

Eine Sounddatei aufgerufen, kein Sound zu hören, in den Einstellungen steht unter Ausgabegerät "Dummy-Ausgabe", keine andere Ausgabe möglich.

Führe mal aus

pacmd load-module module-udev-detect

Sound da?

Bin jetzt erst mal für 3 Std. weg.Verändere bitte nichts weiter am System solange 🤓

Gruß Stephan

Nein, wie eben:

Eine Sounddatei aufgerufen, kein Sound zu hören, in den Einstellungen steht unter Ausgabegerät "Dummy-Ausgabe", keine andere Ausgabe möglich.

Geht klar. Darf ich den Rechner runterfahren?

Bis heute Abend.

Martin

Ja,Neustart und bitte folgende Ausgaben wieder zeigen

pactl info

journalctl -b | egrep pulse

Gruß Stephan

Ok, es geht weiter:

martin@martin-ub:~$ pactl info
Server-Zeichenkette: /run/user/1000/pulse/native
Bibliotheks-Protokollversion: 33
Server-Protokollversion: 33
ist lokal: ja
Client-Index: 10
Tile-Größe: 65472
Name des Benutzers: martin
Rechnername: martin-ub
Name des Servers: pulseaudio
Version des Servers: 13.99.1
Standard-Abtastwert-Angabe: s16le 2ch 44100Hz
Standard-Kanal-Zuordnung: front-left,front-right
Standard-Ziel: auto_null
Standard-Quelle: auto_null.monitor
Cookie: 9498:0bd5

und nun journalctl -b | egrep pulse

martin@martin-ub:~$ journalctl -b | egrep pulse
Sep 19 18:36:48 martin-ub dbus-daemon[1277]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service' requested by ':1.37' (uid=1000 pid=4809 comm="/usr/bin/pulseaudio --daemonize=no --log-target=jo" label="unconfined")
Sep 19 18:36:48 martin-ub pulseaudio[4809]: No UCM verb is valid for hw:1

Dann wollen wir mal sehen

pulseaudio -k; sleep 4; rm -r ~/.config/pulse; sleep 4; pulseaudio --start

pactl info

Das kam bei pactl info raus

artin@martin-ub:~$ pactl info
Server-Zeichenkette: /run/user/1000/pulse/native
Bibliotheks-Protokollversion: 33
Server-Protokollversion: 33
ist lokal: ja
Client-Index: 8
Tile-Größe: 65472
Name des Benutzers: martin
Rechnername: martin-ub
Name des Servers: pulseaudio
Version des Servers: 13.99.1
Standard-Abtastwert-Angabe: s16le 2ch 44100Hz
Standard-Kanal-Zuordnung: front-left,front-right
Standard-Ziel: auto_null
Standard-Quelle: auto_null.monitor
Cookie: 8a1d:470e

Dann mal strammer

rm -r ~/.config/pulse; pulseaudio -k; sleep 4; pulseaudio -vv

Ausgabe vollständig zeigen.

die letzten beiden Angaben sind rot markiert.

martin@martin-ub:~$ rm -r ~/.config/pulse; pulseaudio -k; sleep 4; pulseaudio -vv
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Vorgang nicht zulässig
I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Vorgang nicht zulässig
D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
D: [pulseaudio] core-util.c: RealtimeKit worked.
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 13.99.1
D: [pulseaudio] main.c: Compilation host: x86_64-pc-linux-gnu
D: [pulseaudio] main.c: Compilation CFLAGS: -g -O2 -fdebug-prefix-map=/build/pulseaudio-aQxaHi/pulseaudio-13.99.1=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -W -Wextra -pipe -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -fno-common -fdiagnostics-show-option -fdiagnostics-color=auto
D: [pulseaudio] main.c: Running on host: Linux x86_64 5.4.0-42-generic #46-Ubuntu SMP Fri Jul 10 00:24:02 UTC 2020
D: [pulseaudio] main.c: Found 4 CPUs.
I: [pulseaudio] main.c: Page size is 4096 bytes
D: [pulseaudio] main.c: Compiled with Valgrind support: no
D: [pulseaudio] main.c: Running in valgrind mode: no
D: [pulseaudio] main.c: Running in VM: no
D: [pulseaudio] main.c: Running from build tree: no
D: [pulseaudio] main.c: Optimized build: yes
D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
I: [pulseaudio] main.c: Machine ID is 55e51d419d32e510f2fb82195353b2e7.
I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
I: [pulseaudio] main.c: Using state directory /home/martin/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-13.99.1/modules.
I: [pulseaudio] main.c: Running in system mode: no
E: [pulseaudio] pid.c: Daemon already running.
E: [pulseaudio] main.c: pa_pid_file_create() fehlgeschlagen.
martin@martin-ub:~$ 

Hmmm... zeige mal

ls -l /dev/snd

systemctl status alsa-restore

sudo /etc/init.d/alsa-utils reset

sudo alsa force-reload

ls -l /dev/snd

martin@martin-ub:~$ ls -l /dev/snd
insgesamt 0
drwxr-xr-x  2 root root       80 Sep 19 16:37 by-path
crw-rw----+ 1 root audio 116, 12 Sep 19 16:37 controlC0
crw-rw----+ 1 root audio 116,  4 Sep 19 16:37 controlC1
crw-rw----+ 1 root audio 116, 10 Sep 19 16:37 hwC0D0
crw-rw----+ 1 root audio 116, 11 Sep 19 16:37 hwC0D3
crw-rw----+ 1 root audio 116,  3 Sep 19 16:37 hwC1D0
crw-rw----+ 1 root audio 116,  6 Sep 19 16:37 pcmC0D0c
crw-rw----+ 1 root audio 116,  5 Sep 19 18:36 pcmC0D0p
crw-rw----+ 1 root audio 116,  7 Sep 19 16:37 pcmC0D1p
crw-rw----+ 1 root audio 116,  8 Sep 19 16:37 pcmC0D2c
crw-rw----+ 1 root audio 116,  9 Sep 19 16:37 pcmC0D3p
crw-rw----+ 1 root audio 116,  2 Sep 19 18:53 pcmC1D3p
crw-rw----+ 1 root audio 116,  1 Sep 19 16:37 seq
crw-rw----+ 1 root audio 116, 33 Sep 19 16:37 timer

systemctl status alsa-restore

martin@martin-ub:~$ systemctl status alsa-restore
● alsa-restore.service - Save/Restore Sound Card State
     Loaded: loaded (/lib/systemd/system/alsa-restore.service; static; vendor preset: enabled)
     Active: active (exited) since Sat 2020-09-19 18:36:35 CEST; 33min ago
       Docs: man:alsactl(1)
    Process: 1501 ExecStartPre=/bin/mkdir -p /run/alsa (code=exited, status=0/SUCCESS)
    Process: 1507 ExecStart=/usr/sbin/alsactl -E HOME=/run/alsa -E XDG_RUNTIME_DIR=/run/alsa/runtime restore (code=exited, st>
   Main PID: 1507 (code=exited, status=0/SUCCESS)

Sep 19 18:36:35 martin-ub systemd[1]: Starting Save/Restore Sound Card State...
Sep 19 18:36:35 martin-ub systemd[1]: Finished Save/Restore Sound Card State.
lines 1-10/10 (END)














































● alsa-restore.service - Save/Restore Sound Card State
     Loaded: loaded (/lib/systemd/system/alsa-restore.service; static; vendor preset: enabled)
     Active: active (exited) since Sat 2020-09-19 18:36:35 CEST; 33min ago
       Docs: man:alsactl(1)
    Process: 1501 ExecStartPre=/bin/mkdir -p /run/alsa (code=exited, status=0/SUCCESS)
    Process: 1507 ExecStart=/usr/sbin/alsactl -E HOME=/run/alsa -E XDG_RUNTIME_DIR=/run/alsa/runtime restore (code=exited, sta>
   Main PID: 1507 (code=exited, status=0/SUCCESS)

Sep 19 18:36:35 martin-ub systemd[1]: Starting Save/Restore Sound Card State...
Sep 19 18:36:35 martin-ub systemd[1]: Finished Save/Restore Sound Card State.
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-10/10 (END)





























● alsa-restore.service - Save/Restore Sound Card State
     Loaded: loaded (/lib/systemd/system/alsa-restore.service; static; vendor preset: enabled)
     Active: active (exited) since Sat 2020-09-19 18:36:35 CEST; 33min ago
       Docs: man:alsactl(1)
    Process: 1501 ExecStartPre=/bin/mkdir -p /run/alsa (code=exited, status=0/SUCCESS)
    Process: 1507 ExecStart=/usr/sbin/alsactl -E HOME=/run/alsa -E XDG_RUNTIME_DIR=/run/alsa/runtime restore (code=exited, stat>
   Main PID: 1507 (code=exited, status=0/SUCCESS)

Sep 19 18:36:35 martin-ub systemd[1]: Starting Save/Restore Sound Card State...
Sep 19 18:36:35 martin-ub systemd[1]: Finished Save/Restore Sound Card State.
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-10/10 (END)





























● alsa-restore.service - Save/Restore Sound Card State
     Loaded: loaded (/lib/systemd/system/alsa-restore.service; static; vendor preset: enabled)
     Active: active (exited) since Sat 2020-09-19 18:36:35 CEST; 33min ago
       Docs: man:alsactl(1)
    Process: 1501 ExecStartPre=/bin/mkdir -p /run/alsa (code=exited, status=0/SUCCESS)
    Process: 1507 ExecStart=/usr/sbin/alsactl -E HOME=/run/alsa -E XDG_RUNTIME_DIR=/run/alsa/runtime restore (code=exited, statu>
   Main PID: 1507 (code=exited, status=0/SUCCESS)

Sep 19 18:36:35 martin-ub systemd[1]: Starting Save/Restore Sound Card State...
Sep 19 18:36:35 martin-ub systemd[1]: Finished Save/Restore Sound Card State.
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-10/10 (END)





























● alsa-restore.service - Save/Restore Sound Card State
     Loaded: loaded (/lib/systemd/system/alsa-restore.service; static; vendor preset: enabled)
     Active: active (exited) since Sat 2020-09-19 18:36:35 CEST; 33min ago
       Docs: man:alsactl(1)
    Process: 1501 ExecStartPre=/bin/mkdir -p /run/alsa (code=exited, status=0/SUCCESS)
    Process: 1507 ExecStart=/usr/sbin/alsactl -E HOME=/run/alsa -E XDG_RUNTIME_DIR=/run/alsa/runtime restore (code=exited, status>
   Main PID: 1507 (code=exited, status=0/SUCCESS)

Sep 19 18:36:35 martin-ub systemd[1]: Starting Save/Restore Sound Card State...
Sep 19 18:36:35 martin-ub systemd[1]: Finished Save/Restore Sound Card State.
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-10/10 (END)





























● alsa-restore.service - Save/Restore Sound Card State
     Loaded: loaded (/lib/systemd/system/alsa-restore.service; static; vendor preset: enabled)
     Active: active (exited) since Sat 2020-09-19 18:36:35 CEST; 33min ago
       Docs: man:alsactl(1)
    Process: 1501 ExecStartPre=/bin/mkdir -p /run/alsa (code=exited, status=0/SUCCESS)
    Process: 1507 ExecStart=/usr/sbin/alsactl -E HOME=/run/alsa -E XDG_RUNTIME_DIR=/run/alsa/runtime restore (code=exited, status=>
   Main PID: 1507 (code=exited, status=0/SUCCESS)

Sep 19 18:36:35 martin-ub systemd[1]: Starting Save/Restore Sound Card State...
Sep 19 18:36:35 martin-ub systemd[1]: Finished Save/Restore Sound Card State.
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-10/10 (END)





























● alsa-restore.service - Save/Restore Sound Card State
     Loaded: loaded (/lib/systemd/system/alsa-restore.service; static; vendor preset: enabled)
     Active: active (exited) since Sat 2020-09-19 18:36:35 CEST; 33min ago
       Docs: man:alsactl(1)
    Process: 1501 ExecStartPre=/bin/mkdir -p /run/alsa (code=exited, status=0/SUCCESS)
    Process: 1507 ExecStart=/usr/sbin/alsactl -E HOME=/run/alsa -E XDG_RUNTIME_DIR=/run/alsa/runtime restore (code=exited, status=0>
   Main PID: 1507 (code=exited, status=0/SUCCESS)

Sep 19 18:36:35 martin-ub systemd[1]: Starting Save/Restore Sound Card State...
Sep 19 18:36:35 martin-ub systemd[1]: Finished Save/Restore Sound Card State.
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-10/10 (END)





























● alsa-restore.service - Save/Restore Sound Card State
     Loaded: loaded (/lib/systemd/system/alsa-restore.service; static; vendor preset: enabled)
     Active: active (exited) since Sat 2020-09-19 18:36:35 CEST; 33min ago
       Docs: man:alsactl(1)
    Process: 1501 ExecStartPre=/bin/mkdir -p /run/alsa (code=exited, status=0/SUCCESS)
    Process: 1507 ExecStart=/usr/sbin/alsactl -E HOME=/run/alsa -E XDG_RUNTIME_DIR=/run/alsa/runtime restore (code=exited, status=0/>
   Main PID: 1507 (code=exited, status=0/SUCCESS)

Sep 19 18:36:35 martin-ub systemd[1]: Starting Save/Restore Sound Card State...
Sep 19 18:36:35 martin-ub systemd[1]: Finished Save/Restore Sound Card State.
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-10/10 (END)





























● alsa-restore.service - Save/Restore Sound Card State
     Loaded: loaded (/lib/systemd/system/alsa-restore.service; static; vendor preset: enabled)
     Active: active (exited) since Sat 2020-09-19 18:36:35 CEST; 33min ago
       Docs: man:alsactl(1)
    Process: 1501 ExecStartPre=/bin/mkdir -p /run/alsa (code=exited, status=0/SUCCESS)
    Process: 1507 ExecStart=/usr/sbin/alsactl -E HOME=/run/alsa -E XDG_RUNTIME_DIR=/run/alsa/runtime restore (code=exited, status=0/S>
   Main PID: 1507 (code=exited, status=0/SUCCESS)

Sep 19 18:36:35 martin-ub systemd[1]: Starting Save/Restore Sound Card State...
Sep 19 18:36:35 martin-ub systemd[1]: Finished Save/Restore Sound Card State.
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-10/10 (END)





























● alsa-restore.service - Save/Restore Sound Card State
     Loaded: loaded (/lib/systemd/system/alsa-restore.service; static; vendor preset: enabled)
     Active: active (exited) since Sat 2020-09-19 18:36:35 CEST; 33min ago
       Docs: man:alsactl(1)
    Process: 1501 ExecStartPre=/bin/mkdir -p /run/alsa (code=exited, status=0/SUCCESS)
    Process: 1507 ExecStart=/usr/sbin/alsactl -E HOME=/run/alsa -E XDG_RUNTIME_DIR=/run/alsa/runtime restore (code=exited, status=0/SU>
   Main PID: 1507 (code=exited, status=0/SUCCESS)

Sep 19 18:36:35 martin-ub systemd[1]: Starting Save/Restore Sound Card State...
Sep 19 18:36:35 martin-ub systemd[1]: Finished Save/Restore Sound Card State.
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-10/10 (END)





























● alsa-restore.service - Save/Restore Sound Card State
     Loaded: loaded (/lib/systemd/system/alsa-restore.service; static; vendor preset: enabled)
     Active: active (exited) since Sat 2020-09-19 18:36:35 CEST; 33min ago
       Docs: man:alsactl(1)
    Process: 1501 ExecStartPre=/bin/mkdir -p /run/alsa (code=exited, status=0/SUCCESS)
    Process: 1507 ExecStart=/usr/sbin/alsactl -E HOME=/run/alsa -E XDG_RUNTIME_DIR=/run/alsa/runtime restore (code=exited, status=0/SUC>
   Main PID: 1507 (code=exited, status=0/SUCCESS)

Sep 19 18:36:35 martin-ub systemd[1]: Starting Save/Restore Sound Card State...
Sep 19 18:36:35 martin-ub systemd[1]: Finished Save/Restore Sound Card State.
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-10/10 (END)





























● alsa-restore.service - Save/Restore Sound Card State
     Loaded: loaded (/lib/systemd/system/alsa-restore.service; static; vendor preset: enabled)
     Active: active (exited) since Sat 2020-09-19 18:36:35 CEST; 33min ago
       Docs: man:alsactl(1)
    Process: 1501 ExecStartPre=/bin/mkdir -p /run/alsa (code=exited, status=0/SUCCESS)
    Process: 1507 ExecStart=/usr/sbin/alsactl -E HOME=/run/alsa -E XDG_RUNTIME_DIR=/run/alsa/runtime restore (code=exited, status=0/SUCC>
   Main PID: 1507 (code=exited, status=0/SUCCESS)

Sep 19 18:36:35 martin-ub systemd[1]: Starting Save/Restore Sound Card State...
Sep 19 18:36:35 martin-ub systemd[1]: Finished Save/Restore Sound Card State.
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-10/10 (END)





























● alsa-restore.service - Save/Restore Sound Card State
     Loaded: loaded (/lib/systemd/system/alsa-restore.service; static; vendor preset: enabled)
     Active: active (exited) since Sat 2020-09-19 18:36:35 CEST; 33min ago
       Docs: man:alsactl(1)
    Process: 1501 ExecStartPre=/bin/mkdir -p /run/alsa (code=exited, status=0/SUCCESS)
    Process: 1507 ExecStart=/usr/sbin/alsactl -E HOME=/run/alsa -E XDG_RUNTIME_DIR=/run/alsa/runtime restore (code=exited, status=0/SUCCE>
   Main PID: 1507 (code=exited, status=0/SUCCESS)

Sep 19 18:36:35 martin-ub systemd[1]: Starting Save/Restore Sound Card State...
Sep 19 18:36:35 martin-ub systemd[1]: Finished Save/Restore Sound Card State.
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-10/10 (END)





























● alsa-restore.service - Save/Restore Sound Card State
     Loaded: loaded (/lib/systemd/system/alsa-restore.service; static; vendor preset: enabled)
     Active: active (exited) since Sat 2020-09-19 18:36:35 CEST; 33min ago
       Docs: man:alsactl(1)
    Process: 1501 ExecStartPre=/bin/mkdir -p /run/alsa (code=exited, status=0/SUCCESS)
    Process: 1507 ExecStart=/usr/sbin/alsactl -E HOME=/run/alsa -E XDG_RUNTIME_DIR=/run/alsa/runtime restore (code=exited, status=0/SUCCES>
   Main PID: 1507 (code=exited, status=0/SUCCESS)

Sep 19 18:36:35 martin-ub systemd[1]: Starting Save/Restore Sound Card State...
Sep 19 18:36:35 martin-ub systemd[1]: Finished Save/Restore Sound Card State.
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-10/10 (END)





























● alsa-restore.service - Save/Restore Sound Card State
     Loaded: loaded (/lib/systemd/system/alsa-restore.service; static; vendor preset: enabled)
     Active: active (exited) since Sat 2020-09-19 18:36:35 CEST; 33min ago
       Docs: man:alsactl(1)
    Process: 1501 ExecStartPre=/bin/mkdir -p /run/alsa (code=exited, status=0/SUCCESS)
    Process: 1507 ExecStart=/usr/sbin/alsactl -E HOME=/run/alsa -E XDG_RUNTIME_DIR=/run/alsa/runtime restore (code=exited, status=0/SUCCESS)
   Main PID: 1507 (code=exited, status=0/SUCCESS)

Sep 19 18:36:35 martin-ub systemd[1]: Starting Save/Restore Sound Card State...
Sep 19 18:36:35 martin-ub systemd[1]: Finished Save/Restore Sound Card State.
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-10/10 (END)

sudo /etc/init.d/alsa-utils reset

[ohne Ausgabe]

und endlich: sudo alsa force-reload

martin@martin-ub:~$ sudo alsa force-reload
Terminating processes: 1491 103459.
/sbin/alsa: Warning: Processes using sound devices: 237626(pulseaudio). 
Unloading ALSA sound driver modules: snd-hrtimer snd-hda-codec-realtek snd-hda-codec-generic snd-hda-codec-hdmi snd-hda-intel snd-intel-dspcfg snd-hda-codec snd-hda-core snd-hwdep snd-pcm snd-seq-midi snd-seq-midi-event snd-rawmidi snd-seq snd-seq-device snd-timer (failed: modules still loaded: snd-hda-codec-realtek snd-hda-codec-generic snd-hda-codec-hdmi snd-hda-intel snd-intel-dspcfg snd-hda-codec snd-hda-core snd-hwdep snd-pcm snd-timer).
Loading ALSA sound driver modules: snd-hrtimer snd-hda-codec-realtek snd-hda-codec-generic snd-hda-codec-hdmi snd-hda-intel snd-intel-dspcfg snd-hda-codec snd-hda-core snd-hwdep snd-pcm snd-seq-midi snd-seq-midi-event snd-rawmidi snd-seq snd-seq-device snd-timer.

Jetzt ist der Line-Ausgang eingestellt, der Test läuft positiv, der Klang ist zu hören !!!!!!!!!!!!

Wie kann diese Einstellung dauerhaft gespeichert werden??