Na dann sieh mal 😊
Sporadische Hänger beim Abspielen von Video von externer Festplatte
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 66 |
Achso, das hatte ich auch schon gefunden. Dachte du wärst auf aktuelle Fälle gestoßen. Das Update hat bei mir jedenfalls leider nichts gebracht. |
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
Da sieht man das es immer mal Probleme mit USB3 gibt ☹ Ab jetzt fischen wir nur im Trüben 😬 Zeige mal inxi -FNZ sowie journalctl -xb -p err |
(Themenstarter)
Anmeldungsdatum: Beiträge: 66 |
Achso. Hier die Ausgaben: journalctl -xb -p err -- Logs begin at Fr 2016-10-14 20:51:25 CEST, end at Fr 2016-10-14 21:04:29 CEST. -- Okt 14 20:51:26 clel-PowerEdge-T20 systemd[1]: dev-disk-by\x2dpartlabel-Basic\x5cx20data\x5cx20partition.device: Dev dev-disk-by\x2dpartlabel-Basic\x5cx20data\x5cx20 Okt 14 20:51:27 clel-PowerEdge-T20 NetworkManager[732]: nm_device_get_device_type: assertion 'NM_IS_DEVICE (self)' failed Okt 14 20:51:27 clel-PowerEdge-T20 lightdm[954]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or Okt 14 20:51:27 clel-PowerEdge-T20 lightdm[954]: PAM adding faulty module: pam_kwallet.so Okt 14 20:51:27 clel-PowerEdge-T20 lightdm[954]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object file: No such file o Okt 14 20:51:27 clel-PowerEdge-T20 lightdm[954]: PAM adding faulty module: pam_kwallet5.so Okt 14 20:51:27 clel-PowerEdge-T20 lightdm[1008]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or Okt 14 20:51:27 clel-PowerEdge-T20 lightdm[1008]: PAM adding faulty module: pam_kwallet.so Okt 14 20:51:27 clel-PowerEdge-T20 lightdm[1008]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object file: No such file Okt 14 20:51:27 clel-PowerEdge-T20 lightdm[1008]: PAM adding faulty module: pam_kwallet5.so Okt 14 20:51:27 clel-PowerEdge-T20 pulseaudio[1087]: [pulseaudio] pid.c: Daemon already running. Okt 14 20:51:33 clel-PowerEdge-T20 kernel: scsi 8:0:0:1: Wrong diagnostic page; asked for 1 got 0 Okt 14 20:51:33 clel-PowerEdge-T20 kernel: scsi 8:0:0:1: Failed to get diagnostic page 0xffffffea Okt 14 20:51:33 clel-PowerEdge-T20 kernel: scsi 8:0:0:1: Failed to bind enclosure -19 Okt 14 20:51:33 clel-PowerEdge-T20 kernel: sd 8:0:0:0: [sde] No Caching mode page found Okt 14 20:51:33 clel-PowerEdge-T20 kernel: sd 8:0:0:0: [sde] Assuming drive cache: write through Okt 14 20:51:52 clel-PowerEdge-T20 pulseaudio[1061]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.TimedOut: Failed to activate Okt 14 20:52:33 clel-PowerEdge-T20 pulseaudio[1703]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.TimedOut: Failed to activate inxi -FNZ System: Host: clel-PowerEdge-T20 Kernel: 4.4.0-42-generic x86_64 (64 bit) Desktop: Unity 7.4.0 Distro: Ubuntu 16.04 xenial Machine: System: Dell product: PowerEdge T20 v: 00 Mobo: Dell model: 0VD5HY v: A07 Bios: Dell v: A09 date: 07/07/2016 CPU: Quad core Intel Xeon E3-1225 v3 (-HT-MCP-) cache: 8192 KB clock speeds: max: 3600 MHz 1: 3572 MHz 2: 3599 MHz 3: 2248 MHz 4: 2465 MHz Graphics: Card: Intel Xeon E3-1200 v3 Processor Integrated Graphics Controller Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1920x1080@60.00hz GLX Renderer: Mesa DRI Intel Haswell Server GLX Version: 3.0 Mesa 11.2.2 Audio: Card Intel 8 Series/C220 Series High Definition Audio Controller driver: snd_hda_intel Sound: Advanced Linux Sound Architecture v: k4.4.0-42-generic Network: Card: Intel Ethernet Connection I217-LM driver: e1000e IF: eno1 state: up speed: 1000 Mbps duplex: full mac: 18:66:da:30:cf:65 Drives: HDD Total Size: 13062.6GB (24.2% used) ID-1: /dev/sda model: TOSHIBA_DT01ACA1 size: 1000.2GB ID-2: /dev/sdb model: OCZ size: 60.0GB ID-3: USB /dev/sdc model: External_USB_3.0 size: 4000.8GB ID-4: USB /dev/sdd model: External_USB_3.0 size: 4000.8GB ID-5: USB /dev/sde model: My_Book_1230 size: 4000.8GB Partition: ID-1: / size: 52G used: 39G (81%) fs: ext4 dev: /dev/sdb1 ID-2: swap-1 size: 4.18GB used: 0.00GB (0%) fs: swap dev: /dev/sdb5 RAID: No RAID devices: /proc/mdstat, md_mod kernel module present Sensors: System Temperatures: cpu: 29.8C mobo: 27.8C Fan Speeds (in rpm): cpu: N/A Info: Processes: 229 Uptime: 13 min Memory: 1603.6/3860.1MB Client: Shell (bash) inxi: 2.2.35 Edit: Die betreffende Festplatte ist gerade gar nicht angeschlossen, fällt mir ein. Kann morgen aber vom anderen PC mit angeschlossener Festplatte die Ausgaben posten. |
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
Also wenn ich das richtig sehe [ 7.993907] sd 8:0:0:0: Attached scsi generic sg5 type 0 [ 7.995354] sd 8:0:0:0: [sde] Very big device. Trying to use READ CAPACITY(16). [ 7.995595] sd 8:0:0:0: [sde] 7814037160 512-byte logical blocks: (4.00 TB/3.64 TiB) Okt 14 20:51:33 clel-PowerEdge-T20 kernel: sd 8:0:0:0: [sde] No Caching mode page found Okt 14 20:51:33 clel-PowerEdge-T20 kernel: sd 8:0:0:0: [sde] Assuming drive cache: write through Gibt es Probleme mit dem Cache deiner Externen.Teste das ganze mal wenn nur eine Festplatte am Controler hängt Drives: HDD Total Size: 13062.6GB (24.2% used) ID-1: /dev/sda model: TOSHIBA_DT01ACA1 size: 1000.2GB ID-2: /dev/sdb model: OCZ size: 60.0GB ID-3: USB /dev/sdc model: External_USB_3.0 size: 4000.8GB ID-4: USB /dev/sdd model: External_USB_3.0 size: 4000.8GB ID-5: USB /dev/sde model: My_Book_1230 size: 4000.8GB |
(Themenstarter)
Anmeldungsdatum: Beiträge: 66 |
Am anderen PC mit nur der einen externen Festplatte taucht das Problem aber auch auf. Hier die entsprechenden Ausgaben davon, diesmal auch mit der betroffenen Festplatte angeschlossen: journalctl -xb -p err -- Logs begin at So 2016-10-16 11:09:22 CEST, end at So 2016-10-16 11:46:29 CEST. -- Okt 16 11:09:22 clel-ubuntu-desktop nvidia-persistenced[719]: Failed to query NVIDIA devices. Please ensure that the NVI Okt 16 11:09:23 clel-ubuntu-desktop NetworkManager[772]: nm_device_get_device_type: assertion 'NM_IS_DEVICE (self)' fail Okt 16 11:09:23 clel-ubuntu-desktop nvidia-persistenced[754]: Failed to unlink socket: No such file or directory Okt 16 11:09:23 clel-ubuntu-desktop nvidia-persistenced[754]: Failed to unlink PID file: No such file or directory Okt 16 11:09:24 clel-ubuntu-desktop lightdm[998]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: ca Okt 16 11:09:24 clel-ubuntu-desktop lightdm[998]: PAM adding faulty module: pam_kwallet.so Okt 16 11:09:24 clel-ubuntu-desktop lightdm[998]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: Okt 16 11:09:24 clel-ubuntu-desktop lightdm[998]: PAM adding faulty module: pam_kwallet5.so Okt 16 11:09:24 clel-ubuntu-desktop lightdm[1079]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: c Okt 16 11:09:24 clel-ubuntu-desktop lightdm[1079]: PAM adding faulty module: pam_kwallet.so Okt 16 11:09:24 clel-ubuntu-desktop lightdm[1079]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: Okt 16 11:09:24 clel-ubuntu-desktop lightdm[1079]: PAM adding faulty module: pam_kwallet5.so Okt 16 11:09:27 clel-ubuntu-desktop pulseaudio[1323]: [pulseaudio] pid.c: Daemon already running. Okt 16 11:09:49 clel-ubuntu-desktop pulseaudio[1145]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freede Okt 16 11:09:54 clel-ubuntu-desktop pulseaudio[1965]: [pulseaudio] pid.c: Daemon already running. Okt 16 11:09:54 clel-ubuntu-desktop pulseaudio[1967]: [pulseaudio] pid.c: Daemon already running. Okt 16 11:10:16 clel-ubuntu-desktop pulseaudio[1774]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freede Okt 16 11:14:29 clel-ubuntu-desktop anacron[645]: Can't find sendmail at /usr/sbin/sendmail, not mailing output inxi -FNZ System: Host: clel-ubuntu-desktop Kernel: 4.4.0-43-generic x86_64 (64 bit) Desktop: Unity 7.4.0 Distro: Ubuntu 16.04 xenial Machine: Mobo: ASRock model: Z87 Pro4 Bios: American Megatrends v: P2.30 date: 07/11/2014 CPU: Quad core Intel Core i5-4670K (-MCP-) cache: 6144 KB clock speeds: max: 3800 MHz 1: 3799 MHz 2: 3796 MHz 3: 3797 MHz 4: 3780 MHz Graphics: Card: NVIDIA GM206 [GeForce GTX 960] Display Server: X.Org 1.18.3 drivers: nvidia (unloaded: fbdev,vesa,nouveau) Resolution: 1920x1080@60.00hz GLX Renderer: GeForce GTX 960/PCIe/SSE2 GLX Version: 4.5.0 NVIDIA 361.42 Audio: Card-1 Intel 8 Series/C220 Series High Definition Audio Controller driver: snd_hda_intel Card-2 NVIDIA Device 0fba driver: snd_hda_intel Sound: Advanced Linux Sound Architecture v: k4.4.0-43-generic Network: Card: Intel Ethernet Connection I217-V driver: e1000e IF: enp0s25 state: up speed: 100 Mbps duplex: full mac: bc:5f:f4:d0:d1:4c Drives: HDD Total Size: 1750.4GB (64.4% used) ID-1: /dev/sda model: MDT_MD5000AACS size: 500.1GB ID-2: /dev/sdb model: Samsung_SSD_850 size: 250.1GB ID-3: USB /dev/sdc model: Transcend size: 1000.2GB Partition: ID-1: / size: 230G used: 190G (88%) fs: ext4 dev: /dev/sdb1 ID-2: swap-1 size: 2.14GB used: 0.00GB (0%) fs: swap dev: /dev/sda5 RAID: No RAID devices: /proc/mdstat, md_mod kernel module present Sensors: System Temperatures: cpu: 34.0C mobo: N/A gpu: 33C Fan Speeds (in rpm): cpu: N/A Info: Processes: 219 Uptime: 37 min Memory: 1753.4/7914.2MB Client: Shell (bash) inxi: 2.2.35 |
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
System ist auf den neusten Stand/Bios auch-hmm .Interessant in diesem Fall wäre auch dmesg ob hier auch der xhci_hcd zurück gesetzt wird.Habe aber keinen Lösungsvorschlag falls es das selbe Problem ist ☹ Vielleicht hat ja noch jemand mit mehr Ahnung eine Idee/Lösung |
(Themenstarter)
Anmeldungsdatum: Beiträge: 66 |
Um es vorweg zu nehmen, auch hier wurde der xhci_hcd zurückgesetzt. dmesg [ 0.000000] microcode: CPU0 microcode updated early to revision 0x1e, date = 2015-08-13 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-43-generic (buildd@lgw01-22) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #63-Ubuntu SMP Wed Oct 12 13:48:03 UTC 2016 (Ubuntu 4.4.0-43.63-generic 4.4.21) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-43-generic root=UUID=a190dba3-f408-4fa6-b3cb-4af71816a8b6 ro noprompt persistent quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c8d74fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c8d75000-0x00000000c8d7bfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c8d7c000-0x00000000c9920fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c9921000-0x00000000c9dd1fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c9dd2000-0x00000000dcf1bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dcf1c000-0x00000000dd121fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dd122000-0x00000000dd15efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd15f000-0x00000000dd205fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dd206000-0x00000000ddffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ddfff000-0x00000000ddffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z87 Pro4, BIOS P2.30 07/11/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back [ 0.000000] 1 base 0200000000 mask 7FF0000000 write-back [ 0.000000] 2 base 0210000000 mask 7FF8000000 write-back [ 0.000000] 3 base 0218000000 mask 7FFC000000 write-back [ 0.000000] 4 base 021C000000 mask 7FFE000000 write-back [ 0.000000] 5 base 021E000000 mask 7FFF000000 write-back [ 0.000000] 6 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 8GB, type WB [ 0.000000] reg 1, base: 8GB, range: 256MB, type WB [ 0.000000] reg 2, base: 8448MB, range: 128MB, type WB [ 0.000000] reg 3, base: 8576MB, range: 64MB, type WB [ 0.000000] reg 4, base: 8640MB, range: 32MB, type WB [ 0.000000] reg 5, base: 8672MB, range: 16MB, type WB [ 0.000000] reg 6, base: 3584MB, range: 512MB, type UC [ 0.000000] total RAM covered: 8176M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 512MB, type WB [ 0.000000] reg 3, base: 4GB, range: 4GB, type WB [ 0.000000] reg 4, base: 8GB, range: 512MB, type WB [ 0.000000] reg 5, base: 8688MB, range: 16MB, type UC [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xde000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff] mapped at [ffff8800000fd7f0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x02201000, 0x02201fff] PGTABLE [ 0.000000] BRK [0x02202000, 0x02202fff] PGTABLE [ 0.000000] BRK [0x02203000, 0x02203fff] PGTABLE [ 0.000000] BRK [0x02204000, 0x02204fff] PGTABLE [ 0.000000] BRK [0x02205000, 0x02205fff] PGTABLE [ 0.000000] BRK [0x02206000, 0x02206fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x338de000-0x35c66fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000DD1E3080 000084 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DD1ED618 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DD1E31A0 00A471 (v02 ALASKA A M I 00000230 INTL 20091112) [ 0.000000] ACPI: FACS 0x00000000DD204080 000040 [ 0.000000] ACPI: APIC 0x00000000DD1ED728 000072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DD1ED7A0 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: ASF! 0x00000000DD1ED7E8 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: SSDT 0x00000000DD1ED890 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000DD1EDDD0 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000DD1EE8A8 0001C7 (v01 PmRef LakeTiny 00003000 INTL 20051117) [ 0.000000] ACPI: MCFG 0x00000000DD1EEA70 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DD1EEAB0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DD1EEAE8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT 0x00000000DD1EEE58 003493 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.000000] ACPI: AAFT 0x00000000DD1F22F0 000471 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x21eff6000-0x21effafff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021effffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c8d74fff] [ 0.000000] node 0: [mem 0x00000000c8d7c000-0x00000000c9920fff] [ 0.000000] node 0: [mem 0x00000000c9dd2000-0x00000000dcf1bfff] [ 0.000000] node 0: [mem 0x00000000dd122000-0x00000000dd15efff] [ 0.000000] node 0: [mem 0x00000000ddfff000-0x00000000ddffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff] [ 0.000000] On node 0 totalpages: 2079294 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14059 pages used for memmap [ 0.000000] DMA32 zone: 899746 pages, LIFO batch:31 [ 0.000000] Normal zone: 18368 pages used for memmap [ 0.000000] Normal zone: 1175552 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc8d75000-0xc8d7bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xc9921000-0xc9dd1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdcf1c000-0xdd121fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd15f000-0xdd205fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd206000-0xddffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xde000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xde000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88021ec00000 s98008 r8192 d28968 u524288 [ 0.000000] pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2046782 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-43-generic root=UUID=a190dba3-f408-4fa6-b3cb-4af71816a8b6 ro noprompt persistent quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8064300K/8317176K available (8409K kernel code, 1283K rwdata, 3944K rodata, 1480K init, 1292K bss, 252876K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16640 nr_irqs:456 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3398.987 MHz processor [ 0.000020] Calibrating delay loop (skipped), value calculated using timer frequency.. 6797.97 BogoMIPS (lpj=13595948) [ 0.000022] pid_max: default: 32768 minimum: 301 [ 0.000025] ACPI: Core revision 20150930 [ 0.006674] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.006688] Security Framework initialized [ 0.006689] Yama: becoming mindful. [ 0.006698] AppArmor: AppArmor initialized [ 0.007041] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.008064] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.008507] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.008514] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.008652] Initializing cgroup subsys io [ 0.008655] Initializing cgroup subsys memory [ 0.008659] Initializing cgroup subsys devices [ 0.008660] Initializing cgroup subsys freezer [ 0.008662] Initializing cgroup subsys net_cls [ 0.008663] Initializing cgroup subsys perf_event [ 0.008664] Initializing cgroup subsys net_prio [ 0.008666] Initializing cgroup subsys hugetlb [ 0.008667] Initializing cgroup subsys pids [ 0.008683] CPU: Physical Processor ID: 0 [ 0.008684] CPU: Processor Core ID: 0 [ 0.009417] mce: CPU supports 9 MCE banks [ 0.009427] CPU0: Thermal monitoring enabled (TM1) [ 0.009434] process: using mwait in idle threads [ 0.009437] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.009437] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.009673] Freeing SMP alternatives memory: 32K (ffffffff820b4000 - ffffffff820bc000) [ 0.011962] ftrace: allocating 32007 entries in 126 pages [ 0.020910] smpboot: Max logical packages: 1 [ 0.020911] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.021282] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.060967] TSC deadline timer enabled [ 0.060970] smpboot: CPU0: Intel(R) Core(TM) i5-4670K CPU @ 3.40GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.060981] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. [ 0.060995] ... version: 3 [ 0.060995] ... bit width: 48 [ 0.060996] ... generic registers: 8 [ 0.060996] ... value mask: 0000ffffffffffff [ 0.060997] ... max period: 0000ffffffffffff [ 0.060997] ... fixed-purpose events: 3 [ 0.060998] ... event mask: 00000007000000ff [ 0.061527] x86: Booting SMP configuration: [ 0.061528] .... node #0, CPUs: #1 [ 0.062660] microcode: CPU1 microcode updated early to revision 0x1e, date = 2015-08-13 [ 0.065499] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.065548] #2 [ 0.066680] microcode: CPU2 microcode updated early to revision 0x1e, date = 2015-08-13 [ 0.069541] #3 [ 0.070677] microcode: CPU3 microcode updated early to revision 0x1e, date = 2015-08-13 [ 0.073504] x86: Booted up 1 node, 4 CPUs [ 0.073505] smpboot: Total of 4 processors activated (27191.89 BogoMIPS) [ 0.076101] devtmpfs: initialized [ 0.077609] evm: security.selinux [ 0.077609] evm: security.SMACK64 [ 0.077610] evm: security.SMACK64EXEC [ 0.077611] evm: security.SMACK64TRANSMUTE [ 0.077611] evm: security.SMACK64MMAP [ 0.077612] evm: security.ima [ 0.077612] evm: security.capability [ 0.077656] PM: Registering ACPI NVS region [mem 0xc8d75000-0xc8d7bfff] (28672 bytes) [ 0.077657] PM: Registering ACPI NVS region [mem 0xdd15f000-0xdd205fff] (684032 bytes) [ 0.077711] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.077768] pinctrl core: initialized pinctrl subsystem [ 0.077844] RTC time: 9:09:20, date: 10/16/16 [ 0.077920] NET: Registered protocol family 16 [ 0.089500] cpuidle: using governor ladder [ 0.101502] cpuidle: using governor menu [ 0.101508] PCCT header not found. [ 0.101564] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.101565] ACPI: bus type PCI registered [ 0.101566] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.101615] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.101617] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.101623] PCI: Using configuration type 1 for base access [ 0.101718] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.101722] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.113728] ACPI: Added _OSI(Module Device) [ 0.113729] ACPI: Added _OSI(Processor Device) [ 0.113730] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.113730] ACPI: Added _OSI(Processor Aggregator Device) [ 0.115815] ACPI: Executed 1 blocks of module-level executable AML code [ 0.117190] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.117482] ACPI: Dynamic OEM Table Load: [ 0.117486] ACPI: SSDT 0xFFFF880214D59000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.117877] ACPI: Dynamic OEM Table Load: [ 0.117880] ACPI: SSDT 0xFFFF88021538A800 0005AA (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.118287] ACPI: Dynamic OEM Table Load: [ 0.118289] ACPI: SSDT 0xFFFF880214D0F400 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.118904] ACPI: Interpreter enabled [ 0.118909] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580) [ 0.118912] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580) [ 0.118923] ACPI: (supports S0 S3 S4 S5) [ 0.118924] ACPI: Using IOAPIC for interrupt routing [ 0.118959] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.124286] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.124290] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.124422] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.124505] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.124506] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.124748] PCI host bridge to bus 0000:00 [ 0.124750] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.124751] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.124752] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.124753] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.124754] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.124755] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.124755] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.124756] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.124757] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.124758] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window] [ 0.124759] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.124764] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.124824] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.124848] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.124913] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.124935] pci 0000:00:14.0: reg 0x10: [mem 0xf3120000-0xf312ffff 64bit] [ 0.124977] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.125003] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.125029] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.125051] pci 0000:00:16.0: reg 0x10: [mem 0xf313b000-0xf313b00f 64bit] [ 0.125096] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.125148] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000 [ 0.125168] pci 0000:00:19.0: reg 0x10: [mem 0xf3100000-0xf311ffff] [ 0.125174] pci 0000:00:19.0: reg 0x14: [mem 0xf3139000-0xf3139fff] [ 0.125181] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f] [ 0.125220] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.125246] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.125271] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.125294] pci 0000:00:1a.0: reg 0x10: [mem 0xf3138000-0xf31383ff] [ 0.125355] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.125391] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.125418] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.125438] pci 0000:00:1b.0: reg 0x10: [mem 0xf3130000-0xf3133fff 64bit] [ 0.125487] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.125518] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.125542] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.125594] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.125645] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.125669] pci 0000:00:1c.2: [8086:244e] type 01 class 0x060401 [ 0.125721] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.125768] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.125797] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.125821] pci 0000:00:1d.0: reg 0x10: [mem 0xf3137000-0xf31373ff] [ 0.125883] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.125918] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.125945] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100 [ 0.126076] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.126092] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097] [ 0.126098] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083] [ 0.126104] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077] [ 0.126110] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063] [ 0.126115] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.126121] pci 0000:00:1f.2: reg 0x24: [mem 0xf3136000-0xf31367ff] [ 0.126143] pci 0000:00:1f.2: PME# supported from D3hot [ 0.126188] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.126201] pci 0000:00:1f.3: reg 0x10: [mem 0xf3135000-0xf31350ff 64bit] [ 0.126217] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.126300] pci 0000:01:00.0: [10de:1401] type 00 class 0x030000 [ 0.126317] pci 0000:01:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff] [ 0.126326] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.126335] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.126341] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.126347] pci 0000:01:00.0: reg 0x30: [mem 0xf3000000-0xf307ffff pref] [ 0.126414] pci 0000:01:00.1: [10de:0fba] type 00 class 0x040300 [ 0.126431] pci 0000:01:00.1: reg 0x10: [mem 0xf3080000-0xf3083fff] [ 0.133528] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.133530] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.133531] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf30fffff] [ 0.133562] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.133611] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060401 [ 0.133701] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.133721] pci 0000:00:1c.2: PCI bridge to [bus 03-04] (subtractive decode) [ 0.133728] pci 0000:00:1c.2: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.133729] pci 0000:00:1c.2: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.133730] pci 0000:00:1c.2: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.133731] pci 0000:00:1c.2: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) [ 0.133732] pci 0000:00:1c.2: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 0.133733] pci 0000:00:1c.2: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 0.133734] pci 0000:00:1c.2: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) [ 0.133734] pci 0000:00:1c.2: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode) [ 0.133735] pci 0000:00:1c.2: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode) [ 0.133736] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode) [ 0.133835] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode) [ 0.133852] pci 0000:03:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.133853] pci 0000:03:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.133853] pci 0000:03:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.133854] pci 0000:03:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) [ 0.133855] pci 0000:03:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 0.133856] pci 0000:03:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 0.133857] pci 0000:03:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) [ 0.133858] pci 0000:03:00.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode) [ 0.133859] pci 0000:03:00.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode) [ 0.133860] pci 0000:03:00.0: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode) [ 0.134331] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.134361] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.134389] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.134417] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.134444] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.134473] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.134501] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.134529] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.134651] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.134723] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.134724] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.134725] vgaarb: loaded [ 0.134726] vgaarb: bridge control possible 0000:01:00.0 [ 0.134855] SCSI subsystem initialized [ 0.134872] libata version 3.00 loaded. [ 0.134885] ACPI: bus type USB registered [ 0.134895] usbcore: registered new interface driver usbfs [ 0.134900] usbcore: registered new interface driver hub [ 0.134908] usbcore: registered new device driver usb [ 0.134990] PCI: Using ACPI for IRQ routing [ 0.136173] PCI: pci_cache_line_size set to 64 bytes [ 0.136204] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.136205] e820: reserve RAM buffer [mem 0xc8d75000-0xcbffffff] [ 0.136206] e820: reserve RAM buffer [mem 0xc9921000-0xcbffffff] [ 0.136206] e820: reserve RAM buffer [mem 0xdcf1c000-0xdfffffff] [ 0.136207] e820: reserve RAM buffer [mem 0xdd15f000-0xdfffffff] [ 0.136208] e820: reserve RAM buffer [mem 0xde000000-0xdfffffff] [ 0.136209] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff] [ 0.136278] NetLabel: Initializing [ 0.136279] NetLabel: domain hash size = 128 [ 0.136279] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.136287] NetLabel: unlabeled traffic allowed by default [ 0.136332] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.136335] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.138345] amd_nb: Cannot enumerate AMD northbridges [ 0.138352] clocksource: Switched to clocksource hpet [ 0.142909] AppArmor: AppArmor Filesystem Enabled [ 0.142945] pnp: PnP ACPI init [ 0.142995] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.142998] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.143086] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.143087] system 00:01: [io 0xffff] has been reserved [ 0.143088] system 00:01: [io 0xffff] has been reserved [ 0.143089] system 00:01: [io 0xffff] has been reserved [ 0.143090] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 0.143091] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 0.143092] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 0.143093] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 0.143094] system 00:01: [io 0x1800-0x18fe] could not be reserved [ 0.143095] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.143097] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.143111] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.143139] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.143141] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.143185] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.143187] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.143271] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.143272] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.143362] pnp 00:06: [dma 0 disabled] [ 0.143390] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.143639] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.143640] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.143642] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.143643] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.143644] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.143645] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.143646] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.143647] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.143648] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.143649] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.143650] system 00:07: [mem 0xf7fef000-0xf7feffff] has been reserved [ 0.143651] system 00:07: [mem 0xf7ff0000-0xf7ff0fff] has been reserved [ 0.143653] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.143798] pnp: PnP ACPI: found 8 devices [ 0.150590] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.150619] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.150621] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.150623] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf30fffff] [ 0.150627] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.150634] pci 0000:03:00.0: PCI bridge to [bus 04] [ 0.150650] pci 0000:00:1c.2: PCI bridge to [bus 03-04] [ 0.150658] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.150660] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.150661] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.150661] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.150662] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.150663] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.150664] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.150665] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window] [ 0.150666] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window] [ 0.150667] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window] [ 0.150668] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.150669] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xf30fffff] [ 0.150670] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.150671] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.150672] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.150673] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.150674] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.150674] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.150675] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.150676] pci_bus 0000:03: resource 11 [mem 0x000e0000-0x000e3fff window] [ 0.150677] pci_bus 0000:03: resource 12 [mem 0x000e4000-0x000e7fff window] [ 0.150678] pci_bus 0000:03: resource 13 [mem 0xe0000000-0xfeafffff window] [ 0.150679] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ 0.150680] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ 0.150681] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.150682] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.150683] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.150683] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.150684] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.150685] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff window] [ 0.150686] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff window] [ 0.150687] pci_bus 0000:04: resource 13 [mem 0xe0000000-0xfeafffff window] [ 0.150704] NET: Registered protocol family 2 [ 0.150800] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.150874] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.150968] TCP: Hash tables configured (established 65536 bind 65536) [ 0.150983] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.151001] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.151039] NET: Registered protocol family 1 [ 0.190421] pci 0000:01:00.0: Video device with shadowed ROM [ 0.190429] PCI: CLS 64 bytes, default 64 [ 0.190463] Trying to unpack rootfs image as initramfs... [ 0.557842] Freeing initrd memory: 36388K (ffff8800338de000 - ffff880035c67000) [ 0.557850] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.557851] software IO TLB [mem 0xd8f1c000-0xdcf1c000] (64MB) mapped at [ffff8800d8f1c000-ffff8800dcf1bfff] [ 0.557905] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer [ 0.557906] hw unit of domain pp0-core 2^-14 Joules [ 0.557906] hw unit of domain package 2^-14 Joules [ 0.557907] hw unit of domain dram 2^-14 Joules [ 0.557907] hw unit of domain pp1-gpu 2^-14 Joules [ 0.558015] Scanning for low memory corruption every 60 seconds [ 0.558216] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.558238] audit: initializing netlink subsys (disabled) [ 0.558250] audit: type=2000 audit(1476608960.556:1): initialized [ 0.558562] Initialise system trusted keyring [ 0.558621] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.558622] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.559505] zbud: loaded [ 0.559626] VFS: Disk quotas dquot_6.6.0 [ 0.559645] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.559803] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.559944] fuse init (API version 7.23) [ 0.560026] Key type big_key registered [ 0.560044] Allocating IMA MOK and blacklist keyrings. [ 0.560290] Key type asymmetric registered [ 0.560291] Asymmetric key parser 'x509' registered [ 0.560311] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.560331] io scheduler noop registered [ 0.560332] io scheduler deadline registered (default) [ 0.560349] io scheduler cfq registered [ 0.560582] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.560586] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.560610] intel_idle: MWAIT substates: 0x42120 [ 0.560610] intel_idle: v0.4.1 model 0x3C [ 0.560611] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.560756] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.560759] ACPI: Power Button [PWRB] [ 0.560780] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.560782] ACPI: Power Button [PWRF] [ 0.560892] GHES: HEST is not enabled! [ 0.560946] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.581310] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.582354] Linux agpgart interface v0.103 [ 0.583944] brd: module loaded [ 0.584607] loop: module loaded [ 0.584723] libphy: Fixed MDIO Bus: probed [ 0.584725] tun: Universal TUN/TAP device driver, 1.6 [ 0.584726] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.584748] PPP generic driver version 2.4.2 [ 0.584781] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.584783] ehci-pci: EHCI PCI platform driver [ 0.584845] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.584848] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.584857] ehci-pci 0000:00:1a.0: debug port 2 [ 0.588745] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.588753] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3138000 [ 0.598380] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.598412] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.598413] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.598414] usb usb1: Product: EHCI Host Controller [ 0.598415] usb usb1: Manufacturer: Linux 4.4.0-43-generic ehci_hcd [ 0.598416] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.598523] hub 1-0:1.0: USB hub found [ 0.598527] hub 1-0:1.0: 2 ports detected [ 0.598669] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.598672] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.598680] ehci-pci 0000:00:1d.0: debug port 2 [ 0.602569] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.602576] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3137000 [ 0.614410] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.614435] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.614436] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.614437] usb usb2: Product: EHCI Host Controller [ 0.614438] usb usb2: Manufacturer: Linux 4.4.0-43-generic ehci_hcd [ 0.614439] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.614537] hub 2-0:1.0: USB hub found [ 0.614541] hub 2-0:1.0: 2 ports detected [ 0.614617] ehci-platform: EHCI generic platform driver [ 0.614624] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.614628] ohci-pci: OHCI PCI platform driver [ 0.614634] ohci-platform: OHCI generic platform driver [ 0.614638] uhci_hcd: USB Universal Host Controller Interface driver [ 0.614705] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.614708] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.615773] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 0.615777] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.615829] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.615830] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.615831] usb usb3: Product: xHCI Host Controller [ 0.615832] usb usb3: Manufacturer: Linux 4.4.0-43-generic xhci-hcd [ 0.615832] usb usb3: SerialNumber: 0000:00:14.0 [ 0.615933] hub 3-0:1.0: USB hub found [ 0.615947] hub 3-0:1.0: 14 ports detected [ 0.617472] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.617475] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.617498] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.617499] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.617500] usb usb4: Product: xHCI Host Controller [ 0.617501] usb usb4: Manufacturer: Linux 4.4.0-43-generic xhci-hcd [ 0.617501] usb usb4: SerialNumber: 0000:00:14.0 [ 0.617598] hub 4-0:1.0: USB hub found [ 0.617608] hub 4-0:1.0: 6 ports detected [ 0.618333] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.620880] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.620884] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.621025] mousedev: PS/2 mouse device common for all mice [ 0.621157] rtc_cmos 00:02: RTC can wake from S4 [ 0.621272] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.621292] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.621298] i2c /dev entries driver [ 0.621327] device-mapper: uevent: version 1.0.3 [ 0.621375] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 0.621387] Intel P-state driver initializing. [ 0.621497] ledtrig-cpu: registered to indicate activity on CPUs [ 0.622283] NET: Registered protocol family 10 [ 0.622728] NET: Registered protocol family 17 [ 0.622774] Key type dns_resolver registered [ 0.623280] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1e [ 0.623319] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1e [ 0.623362] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x1e [ 0.623404] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x1e [ 0.623516] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.623920] registered taskstats version 1 [ 0.623957] Loading compiled-in X.509 certificates [ 0.626239] Loaded X.509 cert 'Build time autogenerated kernel key: d76179dc6bbadd817ec29258d181eadabda602cb' [ 0.626288] zswap: loaded using pool lzo/zbud [ 0.627805] Key type trusted registered [ 0.630306] Key type encrypted registered [ 0.630310] AppArmor: AppArmor sha1 policy hashing enabled [ 0.630312] ima: No TPM chip found, activating TPM-bypass! [ 0.630322] evm: HMAC attrs: 0x1 [ 0.630672] Magic number: 4:795:171 [ 0.630710] acpi device:34: hash matches [ 0.630771] rtc_cmos 00:02: setting system clock to 2016-10-16 09:09:20 UTC (1476608960) [ 0.630892] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.630894] EDD information not available. [ 0.630944] PM: Hibernation image not present or could not be loaded. [ 0.631705] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000) [ 0.631706] Write protecting the kernel read-only data: 14336k [ 0.632084] Freeing unused kernel memory: 1820K (ffff880001839000 - ffff880001a00000) [ 0.632374] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000) [ 0.638449] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available) [ 0.638489] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available) [ 0.638497] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available) [ 0.638745] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available) [ 0.638771] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available) [ 0.638902] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available) [ 0.638931] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available) [ 0.638957] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available) [ 0.638982] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available) [ 0.639009] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available) [ 0.652279] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 0.657900] pps_core: LinuxPPS API ver. 1 registered [ 0.657902] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.658655] PTP clock support registered [ 0.660938] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.660939] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.661051] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.834717] e1000e 0000:00:19.0 eth0: registered PHC clock [ 0.834719] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) bc:5f:f4:d0:d1:4c [ 0.834720] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 0.834756] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 0.834805] ahci 0000:00:1f.2: version 3.0 [ 0.834942] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x9 impl SATA mode [ 0.834944] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 0.835162] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 0.842893] scsi host0: ahci [ 0.843152] scsi host1: ahci [ 0.843432] scsi host2: ahci [ 0.843668] scsi host3: ahci [ 0.843825] scsi host4: ahci [ 0.844045] scsi host5: ahci [ 0.844097] ata1: SATA max UDMA/133 abar m2048@0xf3136000 port 0xf3136100 irq 27 [ 0.844098] ata2: DUMMY [ 0.844098] ata3: DUMMY [ 0.844100] ata4: SATA max UDMA/133 abar m2048@0xf3136000 port 0xf3136280 irq 27 [ 0.844100] ata5: DUMMY [ 0.844101] ata6: DUMMY [ 0.910395] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.926403] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.982396] usb 3-11: new high-speed USB device number 3 using xhci_hcd [ 1.042696] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 1.042698] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.042985] hub 1-1:1.0: USB hub found [ 1.043057] hub 1-1:1.0: 6 ports detected [ 1.058697] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 [ 1.058699] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.058974] hub 2-1:1.0: USB hub found [ 1.059058] hub 2-1:1.0: 8 ports detected [ 1.112161] usb 3-11: New USB device found, idVendor=174c, idProduct=2074 [ 1.112163] usb 3-11: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 1.112164] usb 3-11: Product: AS2107 [ 1.112165] usb 3-11: Manufacturer: ASMedia [ 1.112165] usb 3-11: SerialNumber: USB2.0 Hub [ 1.112576] hub 3-11:1.0: USB hub found [ 1.112767] hub 3-11:1.0: 4 ports detected [ 1.162401] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.162414] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.164002] ata4.00: supports DRM functions and may not be fully accessible [ 1.164159] ata4.00: READ LOG DMA EXT failed, trying unqueued [ 1.164216] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.164217] ata4.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133 [ 1.164218] ata4.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.164771] ata4.00: supports DRM functions and may not be fully accessible [ 1.164832] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.164919] ata4.00: configured for UDMA/133 [ 1.222457] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd [ 1.350382] usb 3-13: new low-speed USB device number 4 using xhci_hcd [ 1.541925] usb 3-13: New USB device found, idVendor=046d, idProduct=c328 [ 1.541927] usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.541928] usb 3-13: Product: USB Keyboard [ 1.541929] usb 3-13: Manufacturer: Logitech [ 1.542047] usb 3-13: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.542050] usb 3-13: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.546061] hidraw: raw HID events driver (C) Jiri Kosina [ 1.554239] usbcore: registered new interface driver usbhid [ 1.554240] usbhid: USB HID core driver [ 1.554377] tsc: Refined TSC clocksource calibration: 3399.013 MHz [ 1.554379] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30feaaa6ba3, max_idle_ns: 440795361226 ns [ 1.555352] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.0/0003:046D:C328.0001/input/input5 [ 1.561775] ata1.00: ATA-8: MDT MD5000AACS-00ZJB0, 01.01B01, max UDMA/133 [ 1.561777] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.562705] ata1.00: configured for UDMA/133 [ 1.562882] scsi 0:0:0:0: Direct-Access ATA MDT MD5000AACS-0 1B01 PQ: 0 ANSI: 5 [ 1.563131] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.563136] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.563310] sd 0:0:0:0: [sda] Write Protect is off [ 1.563313] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.563405] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.563407] scsi 3:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5 [ 1.563574] sd 3:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 1.563588] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 1.563632] sd 3:0:0:0: [sdb] Write Protect is off [ 1.563634] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.563682] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.565336] sdb: sdb1 [ 1.565480] sd 3:0:0:0: [sdb] Attached SCSI disk [ 1.582578] sda: sda1 sda2 < sda5 sda6 > [ 1.583338] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.610638] hid-generic 0003:046D:C328.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-13/input0 [ 1.612508] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.1/0003:046D:C328.0002/input/input6 [ 1.666670] hid-generic 0003:046D:C328.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-13/input1 [ 1.710421] usb 3-14: new full-speed USB device number 5 using xhci_hcd [ 1.839368] usb 3-14: New USB device found, idVendor=1532, idProduct=0042 [ 1.839370] usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.839371] usb 3-14: Product: Razer Abyssus [ 1.839372] usb 3-14: Manufacturer: Razer [ 1.840250] input: Razer Razer Abyssus as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/0003:1532:0042.0003/input/input7 [ 1.840431] hid-generic 0003:1532:0042.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer Abyssus] on usb-0000:00:14.0-14/input0 [ 2.056970] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 2.147126] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 2.147201] systemd[1]: Detected architecture x86-64. [ 2.147316] systemd[1]: Set hostname to <clel-ubuntu-desktop>. [ 2.211809] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.211845] systemd[1]: Listening on udev Control Socket. [ 2.211861] systemd[1]: Listening on udev Kernel Socket. [ 2.211881] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 2.211933] systemd[1]: Created slice System Slice. [ 2.211947] systemd[1]: Reached target Encrypted Volumes. [ 2.212010] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.212035] systemd[1]: Listening on Syslog Socket. [ 2.212072] systemd[1]: Created slice User and Session Slice. [ 2.212080] systemd[1]: Reached target Slices. [ 2.212102] systemd[1]: Listening on Journal Socket. [ 2.234461] systemd[1]: Starting Uncomplicated firewall... [ 2.234750] systemd[1]: Started Braille Device Support. [ 2.235262] systemd[1]: Mounting Huge Pages File System... [ 2.237004] systemd[1]: Started Read required files in advance. [ 2.237272] systemd[1]: Mounting POSIX Message Queue File System... [ 2.237546] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 2.237788] systemd[1]: Mounting Debug File System... [ 2.237859] systemd[1]: Listening on Journal Audit Socket. [ 2.237886] systemd[1]: Listening on fsck to fsckd communication Socket. [ 2.239621] systemd[1]: Starting Load Kernel Modules... [ 2.240150] systemd[1]: Starting Set console keymap... [ 2.240167] systemd[1]: Reached target User and Group Name Lookups. [ 2.240185] systemd[1]: Reached target Remote File Systems (Pre). [ 2.240194] systemd[1]: Reached target Remote File Systems. [ 2.240230] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.240468] systemd[1]: Starting Journal Service... [ 2.241182] systemd[1]: Started Uncomplicated firewall. [ 2.243416] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 2.250929] systemd[1]: Mounted Debug File System. [ 2.250961] systemd[1]: Mounted Huge Pages File System. [ 2.250979] systemd[1]: Mounted POSIX Message Queue File System. [ 2.256727] systemd[1]: Starting Create Static Device Nodes in /dev... [ 2.258113] lp: driver loaded but no devices found [ 2.261779] ppdev: user-space parallel port driver [ 2.263897] systemd[1]: Started Load Kernel Modules. [ 2.264282] systemd[1]: Mounting FUSE Control File System... [ 2.264547] systemd[1]: Starting Apply Kernel Variables... [ 2.265795] systemd[1]: Mounted FUSE Control File System. [ 2.269693] systemd[1]: Started Apply Kernel Variables. [ 2.280868] systemd[1]: Started Journal Service. [ 2.329026] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 2.355546] systemd-journald[247]: Received request to flush runtime journal from PID 1 [ 2.425961] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.450333] [drm] Initialized drm 1.1.0 20060810 [ 2.454260] razermouse: module verification failed: signature and/or required key missing - tainting kernel [ 2.457804] audit: type=1400 audit(1476608962.320:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=502 comm="apparmor_parser" [ 2.457809] audit: type=1400 audit(1476608962.320:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=502 comm="apparmor_parser" [ 2.457812] audit: type=1400 audit(1476608962.320:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=502 comm="apparmor_parser" [ 2.457815] audit: type=1400 audit(1476608962.320:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=502 comm="apparmor_parser" [ 2.458232] snd_hda_intel 0000:01:00.1: Disabling MSI [ 2.458237] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 2.460137] audit: type=1400 audit(1476608962.324:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=501 comm="apparmor_parser" [ 2.460142] audit: type=1400 audit(1476608962.324:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=501 comm="apparmor_parser" [ 2.460827] audit: type=1400 audit(1476608962.324:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=525 comm="apparmor_parser" [ 2.460831] audit: type=1400 audit(1476608962.324:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=525 comm="apparmor_parser" [ 2.469496] audit: type=1400 audit(1476608962.332:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=505 comm="apparmor_parser" [ 2.479278] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 2.479280] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.479282] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 2.479282] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 2.479283] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 2.479284] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 2.479285] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 2.479286] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 2.479287] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 2.482513] random: nonblocking pool is initialized [ 2.484999] AVX2 version of gcm_enc/dec engaged. [ 2.485001] AES CTR mode by8 optimization enabled [ 2.491679] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 2.491710] input: Razer Razer Abyssus as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/0003:1532:0042.0003/input/input15 [ 2.491724] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 2.491827] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 2.491858] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 2.491905] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 2.491939] razermouse 0003:1532:0042.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer Abyssus] on usb-0000:00:14.0-14/input0 [ 2.491998] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 2.492028] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 2.509516] Adding 2093052k swap on /dev/sda5. Priority:-1 extents:1 across:2093052k FS [ 2.524133] nvidia: module license 'NVIDIA' taints kernel. [ 2.524133] Disabling lock debugging due to kernel taint [ 2.550572] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 2.550629] nvidia-nvlink: Nvlink Core is being initialized, major device number 244 [ 2.550694] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0 [ 2.550697] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 361.42 Tue Mar 22 18:10:58 PDT 2016 [ 2.554672] clocksource: Switched to clocksource tsc [ 2.561698] intel_rapl: Found RAPL domain package [ 2.561700] intel_rapl: Found RAPL domain core [ 2.561702] intel_rapl: Found RAPL domain dram [ 2.585731] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 361.42 Tue Mar 22 17:29:54 PDT 2016 [ 2.600278] nvidia-uvm: Loaded the UVM driver in lite mode, major device number 243 [ 2.881588] cgroup: new mount options do not match the existing superblock, will be ignored [ 2.951315] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16 [ 2.951350] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17 [ 2.951378] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18 [ 2.951406] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19 [ 3.007880] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 3.214556] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 3.252674] usb 4-2: New USB device found, idVendor=174c, idProduct=5106 [ 3.252677] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 3.252678] usb 4-2: Product: StoreJet Transcend [ 3.252679] usb 4-2: Manufacturer: StoreJet Transcend [ 3.252679] usb 4-2: SerialNumber: S318J9AF606187 [ 3.498467] usb 4-5: new SuperSpeed USB device number 3 using xhci_hcd [ 3.516105] usb 4-5: New USB device found, idVendor=174c, idProduct=3074 [ 3.516107] usb 4-5: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 3.516108] usb 4-5: Product: AS2107 [ 3.516109] usb 4-5: Manufacturer: ASMedia [ 3.516110] usb 4-5: SerialNumber: USB2.0 Hub [ 3.930293] nvidia-modeset: Allocated GPU:0 (GPU-4783c34a-8e85-ba34-8009-8e9be7e45f15) @ PCI:0000:01:00.0 [ 4.704208] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 4.704212] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO [ 4.704243] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 8.514482] usb 4-5: Enable of device-initiated U2 failed. [ 8.514543] hub 4-5:1.0: USB hub found [ 8.515261] hub 4-5:1.0: 4 ports detected [ 8.522274] usb-storage 4-2:1.0: USB Mass Storage device detected [ 8.522313] scsi host6: usb-storage 4-2:1.0 [ 8.522463] usbcore: registered new interface driver usb-storage [ 8.523446] usbcore: registered new interface driver uas [ 9.535308] scsi 6:0:0:0: Direct-Access StoreJet Transcend 0 PQ: 0 ANSI: 6 [ 9.535789] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 9.535891] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 9.536086] sd 6:0:0:0: [sdc] Write Protect is off [ 9.536088] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 9.536286] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.568923] sdc: sdc1 sdc2 [ 9.570151] sd 6:0:0:0: [sdc] Attached SCSI disk [ 34.566198] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null) [ 2226.894832] systemd[1]: apt-daily.timer: Adding 2h 7min 47.523627s random time. [ 2227.246291] systemd[1]: apt-daily.timer: Adding 3h 50min 6.903594s random time. [ 2227.309110] systemd[1]: apt-daily.timer: Adding 10h 28min 52.321982s random time. [ 2227.545595] systemd[1]: apt-daily.timer: Adding 8h 58min 49.114936s random time. [ 2227.618257] systemd[1]: apt-daily.timer: Adding 6h 22min 56.869945s random time. [ 2227.681854] systemd[1]: apt-daily.timer: Adding 9h 30min 31.135725s random time. [20912.249509] usb 4-2: reset SuperSpeed USB device number 2 using xhci_hcd [24569.573033] perf interrupt took too long (2517 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 Als Ergänzung vielleicht noch: Das Problem mit dem nicht reagieren tritt auf und einige Sekunden danach kommt erst die Meldung mit dem Reset. Danach funktioniert direkt wieder alles. Also entweder dauert der Reset so lange und die Meldung wird erst danach ausgegeben, oder das Problem taucht auf und erst ein paar Sekunden später wird der Reset durchgeführt. |
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
Falls du Experimentierfreudig bist http://axebase.net/blog/2016/08/13/yakkety-kernel-in-xenial/ |
(Themenstarter)
Anmeldungsdatum: Beiträge: 66 |
Ich denke, da warte ich lieber bis zum offiziellen Release, der ist ja auch schon bald ☺ |
(Themenstarter)
Anmeldungsdatum: Beiträge: 66 |
Ich Idiot, hatte irgendwie im Kopf gehabt, dass der Release erst so am 20. sei. Und bei LTS wird ja leider nicht über jede neue Version benachrichtigt. Habe dann jetzt mal die Aktualisierung angestoßen. |
(Themenstarter)
Anmeldungsdatum: Beiträge: 66 |
Leider mit Ubuntu 16.10 immer noch das gleiche Problem. Habe jetzt zusätzlich hier mal um Hilfe gebeten: http://askubuntu.com/questions/839703/usb-3-0-harddrive-is-unresponsive-for-several-seconds-occasionally |