Stefan_Schmitz
Anmeldungsdatum: 7. November 2007
Beiträge: 433
Wohnort: France
|
Moin, ich habe vor drei Tagen ein neues Synolog DS720+ NAS eingerichtet, ihn "ABC123" genannt (oder so ähnlich ;o) und konnte gleich am ersten Tag das NAS im Dateimanager (Dateien) erkennen und dann dorthin ein TB Daten (vor allem RAW Files) verschieben. Den Ordner habe ich "stefan" genannt, weil auch meine Frau und meine Tochter ihre eigenen Ordner bekommen sollen. Unter "stefan" befinden sich dann "Photos", "Musik" usw. Unter anderem - und das ist SEHR wichtig - konnte ich aus darktable (RAW Konverter, Photo-Software) auf die Dateien auf dem NAS zugreifen. ABC123/stefan war für Programme als Datenquelle erreichbar. Geil. Geht nicht mehr. Als ich dann den Zugriff vom Mobiltelefon eingerichtet hatte rumpelte das NAS für sechs Stunden. Nun ist "stefan" ein "freigegebener Ordner" und ich kann meine Dateien nur noch von der DSFiles App auf dem Android Telephon oder über den Browser (QuickConnect) erreichen. Der Zugriff über den Dateimanager - und damit aus darktable oder aus Rhythmbox - ist unmöglich. Ich bekomme stets eine Fehlermeldung
Zugriff auf den Ort ist nicht möglich
Empfangen der Freigabeliste vom Server ist gescheitert
Das Argument ist ungültig
Ich bin ratlos. Die suche nach smb://ABC123 bringt nix - Immer kommt eine Fehlermeldung
Zugriff auf den Ort nicht möglich
Empfangen der Freigabenliste vom Server ist gescheitert
Verbindungsaufbau abgelehnt
Interessant ist der Unterschied in der dritten Zeile: Einmal ist das Argument ungültig, ein ander Mal wird der Verbindungsaufbau abgelehnt.
In beiden Fällen stehe ich wie ein Ochs vorm Berge - ich habe den ganzen Tag keine Ahnung von Netzwerken und brauche Hilfe. Vielen Dank im Voraus Stefan
|
chr123
Anmeldungsdatum: 19. Juli 2018
Beiträge: 1632
|
Der Fehler liegt ursächlich am Browsen der Netzwerkfreigaben, das seit der Änderung der Defaultversion des SMB Protokolls von 1 auf 3 nicht mehr ohne funktioniert. Lösung ist immer: keinen Namen verwenden (immer die IP) und auf das Browsen verzichten. Mit smb://IPdesNAS solltest du auf die Übersicht der Shares kommen.
|
Stefan_Schmitz
(Themenstarter)
Anmeldungsdatum: 7. November 2007
Beiträge: 433
Wohnort: France
|
Nein. Das klappt nicht. ich gebe in Dateien || + Andere Orte || Mit Server verbinden smb://192.168.123.456 ein (die letzten beiden Zifferngruppen sind anders) und ich bekomme die Fehlermeldung
Zugriff auf den Ort ist nicht möglich Empfangen der Freigabeliste vom Server ist gescheitert Das Argument ist ungültig
|
chr123
Anmeldungsdatum: 19. Juli 2018
Beiträge: 1632
|
In Nautilus kann man - ich glaube mit Strg + L - die Adressleiste einblenden. Dann in der Adressleiste direkt smb://192.168.123.456 eingeben. Ansonsten kannst du bitte mal die Ausgabe von
sudo apt install smbclient
smbclient -L 192.168.123.456 -U guest -N
zeigen?
|
Stefan_Schmitz
(Themenstarter)
Anmeldungsdatum: 7. November 2007
Beiträge: 433
Wohnort: France
|
Bitte schön: stefan@outpost:~$ smbclient -L 192.168.123.456 -U guest -N
lp_load_ex: Max protocol NT1 is less than min protocol SMB2_02.
protocol negotiation failed: NT_STATUS_INVALID_PARAMETER_MIX
|
chr123
Anmeldungsdatum: 19. Juli 2018
Beiträge: 1632
|
Ok, zur Erklärung:
In Ubuntu ist es mittlerweile Standard, dass die veraltete und unsichere SMB Protokollversion 1.0 nicht per Default genutzt wird. Auch smbclient setzt eine höhere Version voraus. Diese Mischung zwischen alter und neuer Version kann die Probleme erklären. Du kannst grundsätzlich aber auch die Version 1.0 wieder reaktivieren (via smb.conf). Lass uns aber erstmal abklären, ob du eine smb.conf hast und welche SMB Versionen überhaupt verfügbar sind. Bspw mit nmap
cat /etc/samba/smb.conf
sudo apt install nmap
sudo nmap --script smb-protocols 192.168.123.456 Private IP Adresse zu verfremden ist übrigens nicht notwendig, da diese nicht geroutet werden.
|
Stefan_Schmitz
(Themenstarter)
Anmeldungsdatum: 7. November 2007
Beiträge: 433
Wohnort: France
|
OK - keine Verfremdung mehr. stefan@outpost:~$ cat /etc/samba/smb.conf
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
# - When such options are commented with ";", the proposed setting
# differs from the default Samba behaviour
# - When commented with "#", the proposed setting is the default
# behaviour of Samba but the option is considered important
# enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
#======================= Global Settings =======================
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP
client max protocol = NT1
# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)
#### Networking ####
# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0
# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Cap the size of the individual log files (in KiB).
max log size = 1000
# We want Samba to only log to /var/log/samba/log.{smbd,nmbd}.
# Append syslog@1 if you want important messages to be sent to syslog too.
logging = file
# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone server" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
server role = standalone server
obey pam restrictions = yes
# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes
# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes
# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user
########## Domains ###########
#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#
# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U
# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd
# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g
############ Misc ############
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap config * : backend = tdb
; idmap config * : range = 3000-7999
; idmap config YOURDOMAINHERE : backend = tdb
; idmap config YOURDOMAINHERE : range = 100000-999999
; template shell = /bin/bash
# Setup usershare options to enable non-root users to share folders
# with the net usershare command.
# Maximum number of usershare. 0 means that usershare is disabled.
# usershare max shares = 100
# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes
#======================= Share Definitions =======================
# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
; comment = Home Directories
; browseable = no
# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
; read only = yes
# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
; create mask = 0700
# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
; directory mask = 0700
# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
; valid users = %S
# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes
# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700
[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
guest ok = no
read only = yes
create mask = 0700
# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
; write list = root, @lpadmin und weiter stefan@outpost:~$ sudo nmap --script smb-protocols 192.168.1.24
Starting Nmap 7.80 ( https://nmap.org ) at 2022-01-09 18:59 CET
Nmap scan report for Homeboy.home (192.168.1.24)
Host is up (0.0022s latency).
Not shown: 989 closed ports
PORT STATE SERVICE
80/tcp open http
111/tcp open rpcbind
139/tcp open netbios-ssn
443/tcp open https
445/tcp open microsoft-ds
2049/tcp open nfs
3261/tcp open winshadow
4045/tcp open lockd
5000/tcp open upnp
5001/tcp open commplex-link
5357/tcp open wsdapi
MAC Address: 00:11:32:F9:D2:A9 (Synology Incorporated)
Host script results:
| smb-protocols:
| dialects:
| 2.02
| 2.10
| 3.00
| 3.02
|_ 3.11
Nmap done: 1 IP address (1 host up) scanned in 0.52 seconds
|
chr123
Anmeldungsdatum: 19. Juli 2018
Beiträge: 1632
|
Du hast in deiner smb.conf folgende Zeile:
client max protocol = NT1 Damit begrenzt du den Verbindungsaufbau auf die SMB Version 1.0. Dein Server kann aber erst ab der SMB Version 2.02 Verbindungen akzeptieren (siehe Ausgabe von nmap). Daher kannst du keine Verbindung herstellen. Also entweder die Zeile in der smb.conf auskommentieren oder auf dem NAS die Version 1.0 freigeben. Dann sollte der Verbindungsaufbau per smb://192.168.1.24 in Nautilus gehen. Ggf musst du noch die Workgroup korrigieren.
|
Stefan_Schmitz
(Themenstarter)
Anmeldungsdatum: 7. November 2007
Beiträge: 433
Wohnort: France
|
Sorry, nein. Das hat nicht geklappt. Ich habe die Zeile auskommentiert (ein # davor) und ... wenn ich dann in das "Mit Server verbinden" Feld "smb://192.168.1.24" eingebe bekomme ich wieder die bereits bekannte Fehlermeldung.
|
chr123
Anmeldungsdatum: 19. Juli 2018
Beiträge: 1632
|
Ok, zur Kontrolle sicherheitshalber noch mal (es dürften jetzt nur die Defaults vorhanden sein):
| testparm -vs | grep protocol
|
smbclient dürfte jetzt auch wieder funktionieren, zur Sicherheit kann man die SMB Version auch überschreiben:
| smbclient -L 192.168.1.24 -U guest -N
smbclient -L 192.168.1.24 -U guest -N -mSMB3
|
Was ich immer noch nicht verstehe, warum es noch nicht geht. Hast du sonst noch irgendwelche Änderungen an der smb.conf vorgenommen? Wenn smbclient funktioniert, dann können wir die Freigabe allerdings auch mit mount.cifs einhängen.
|
Stefan_Schmitz
(Themenstarter)
Anmeldungsdatum: 7. November 2007
Beiträge: 433
Wohnort: France
|
zuerst: stefan@outpost:~$ testparm -vs | grep protocol
Load smb config files from /etc/samba/smb.conf
Loaded services file OK.
Weak crypto is allowed
Server role: ROLE_STANDALONE
client ipc max protocol = default
client ipc min protocol = default
client max protocol = default
client min protocol = SMB2_02
server max protocol = SMB3
server min protocol = SMB2_02
und dann stefan@outpost:~$ smbclient -L 192.168.1.24 -U guest -N
session setup failed: NT_STATUS_LOGON_FAILURE
stefan@outpost:~$ smbclient -L 192.168.1.24 -U guest -N -mSMB3
session setup failed: NT_STATUS_LOGON_FAILURE
ich denke nicht, dass ich an der smb.conf weitere Änderungen vorgenommen habe. Du hast sie ja gesehen
|
chr123
Anmeldungsdatum: 19. Juli 2018
Beiträge: 1632
|
Ok, dann sind wir einen Schritt weiter. Du hast auf dem Share keinen Gast Account, daher wird der Benutzer "guest" abgelehnt. Mit welchem Benutzer greifst du auf den Share zu? Du kannst es auch ohne die Angabe eines Benutzers probieren:
| smbclient -L 192.168.1.24 -N
smbclient -L 192.168.1.24 -U DEIN-BENUTZER-AUF-DEM-NAS
|
|
Stefan_Schmitz
(Themenstarter)
Anmeldungsdatum: 7. November 2007
Beiträge: 433
Wohnort: France
|
Bitte schön: stefan@outpost:~$ smbclient -L 192.168.1.24 -N
session setup failed: NT_STATUS_LOGON_FAILURE
stefan@outpost:~$ smbclient -L 192.168.1.24 -U stefan
Enter WORKGROUP\stefan's password:
Sharename Type Comment
--------- ---- -------
stefan Disk stefan files
IPC$ IPC IPC Service ()
SMB1 disabled -- no workgroup available
|
chr123
Anmeldungsdatum: 19. Juli 2018
Beiträge: 1632
|
Ok, dann beschäftigen wir uns später mit dem mounten per gvfs (das ist Gnome - Mit Server verbinden) und mounten per cifs. Dazu:
sudo apt install cifs-utils
mkdir ~/test123
sudo mount -t cifs -o username=stefan,uid=1000 //192.168.1.24/stefan ~/test123 Wenn das ohne Felher durchläuft, dann gehe bitte mal im Anschluß in dein /home Verzeichnis. Dort sollte der Ordner test123 den Inhalt des Shares stefan des NAS anzeigen.
|
Stefan_Schmitz
(Themenstarter)
Anmeldungsdatum: 7. November 2007
Beiträge: 433
Wohnort: France
|
stefan@outpost:~$ sudo mount -t cifs -o username=stefan,uid1000 //192.168.1.24/stefan ~/test123
Password for stefan@//192.168.1.24/stefan: ***************
mount error(22): Invalid argument
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) and kernel log messages (dmesg)
und
stefan@outpost:/home$ ls -l
insgesamt 20
drwx------ 2 root root 16384 août 21 2020 lost+found
drwxr-xr-x 26 stefan stefan 4096 janv. 9 20:56 stefan da is' nix ...
|