ubuntuusers.de

via DuckDuckGo

Tevii s464 in Ubuntu 13.10 wird nicht erkannt

Status: Gelöst | Ubuntu-Version: Ubuntu 13.10 (Saucy Salamander)
Antworten |

Fullpower

Anmeldungsdatum:
7. Juni 2013

Beiträge: 71
Zitieren
14. März 2014 17:55 (zuletzt bearbeitet: 14. März 2014 23:11)

Hallo,

wenn das nicht funktioniert hat, kannst du es ja mal so probieren.

sudo apt-get install libncurses5-dev libproc-processtable-perl subversion mercurial linux-headers-$(uname -r) build-essential git

cd liplianin-s2-liplianin-v39-4c01a16b6237
sudo make rminstall 
make distclean
sudo make menuconfig

Multimedia support –→ Camera/video grabbers support, Analog TV support, AM/FM radio support abwählen (Space Taste) dann Save und Exit.

make 
sudo make install
cd ..
wget http://www.tevii.com/dvb-fe-ds3000.rar
unrar e dvb-fe-ds3000.rar
sudo cp dvb-fe-ds3000.fw /lib/firmware
sudo reboot

LG

beffatore

(Themenstarter)

Anmeldungsdatum:
21. Februar 2014

Beiträge: 41
Zitieren
15. März 2014 18:51

Auf

dmesg | grep -i -E 'dvb|firmware'

hat er folgendes gebracht: 

1
2
3
4
toni@toni-System-Product-Name-System-Product-Name:~$ dmesg | grep -i -E 'dvb|firmware'
[    0.125815] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.131615] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
toni@toni-System-Product-Name-System-Product-Name:~$

Auf:

modinfo cx8800

Folgendes: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
toni@toni-System-Product-Name-System-Product-Name:~$ modinfo cx8800
filename:       /lib/modules/3.11.0-18-generic/kernel/drivers/media/pci/cx88/cx8800.ko
version:        0.0.9
license:        GPL
author:         Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
description:    v4l2 driver module for cx2388x based TV cards
srcversion:     DF3F923C0B7A21C1B88D88C
alias:          pci:v000014F1d00008800sv*sd*bc*sc*i*
depends:        videobuf-core,videobuf-dma-sg,videodev,cx88xx,v4l2-common,btcx-risc
vermagic:       3.11.0-18-generic SMP mod_unload modversions 686 
parm:           vbibufs:number of vbi buffers, range 2-32 (int)
parm:           vbi_debug:enable debug messages [vbi] (int)
parm:           video_nr:video device numbers (array of int)
parm:           vbi_nr:vbi device numbers (array of int)
parm:           radio_nr:radio device numbers (array of int)
parm:           video_debug:enable debug messages [video] (int)
parm:           irq_debug:enable debug messages [IRQ handler] (int)
parm:           vid_limit:capture memory limit in megabytes (int)
toni@toni-System-Product-Name-System-Product-Name:~$

Auf:

modinfo cx8802

kam: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
filename:       /lib/modules/3.11.0-18-generic/kernel/drivers/media/pci/cx88/cx8802.ko
version:        0.0.9
license:        GPL
author:         Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
author:         Chris Pascoe <c.pascoe@itee.uq.edu.au>
author:         Jelle Foks <jelle@foks.us>
description:    mpeg driver for cx2388x based TV cards
srcversion:     DF6518592F971C63CF01D0F
alias:          pci:v000014F1d00008802sv*sd*bc*sc*i*
depends:        videobuf-dma-sg,cx88xx,videobuf-core,btcx-risc

MfG beffatore

beffatore

(Themenstarter)

Anmeldungsdatum:
21. Februar 2014

Beiträge: 41
Zitieren
16. März 2014 10:13

Jetzt erhalte ich folgendes: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
toni@toni-System-Product-Name-System-Product-Name:~$ dmesg | grep -i -E 'dvb|firmware'
[    0.116562] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.122103] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
toni@toni-System-Product-Name-System-Product-Name:~$ modinfo cx8800
libkmod: ERROR ../libkmod/libkmod-module.c:174 kmod_module_parse_depline: ctx=0xb8424008 path=/lib/modules/3.11.0-18-generic/kernel/drivers/media/pci/cx88/cx88xx.ko error=No such file or directory
filename:       /lib/modules/3.11.0-18-generic/kernel/drivers/media/pci/cx88/cx8800.ko
ERROR: could not get modinfo from 'cx8800': No such file or directory
toni@toni-System-Product-Name-System-Product-Name:~$ modinfo cx8802
libkmod: ERROR ../libkmod/libkmod-module.c:174 kmod_module_parse_depline: ctx=0xb863f008 path=/lib/modules/3.11.0-18-generic/kernel/drivers/media/pci/cx88/cx88xx.ko error=No such file or directory
filename:       /lib/modules/3.11.0-18-generic/kernel/drivers/media/pci/cx88/cx8802.ko
ERROR: could not get modinfo from 'cx8802': No such file or directory
toni@toni-System-Product-Name-System-Product-Name:~$

Soll ich Deine vorherige Anleitung vielleicht nochmal Schritt für Schritt durchführen? Schönen Sonntag, beffatore

beffatore

(Themenstarter)

Anmeldungsdatum:
21. Februar 2014

Beiträge: 41
Zitieren
16. März 2014 10:26

Noch was: Meine gestrige Antwort bezog sich inhaltlich auf Hakumatata, angeklickt habe ich aber den Antwort-Button unter Fullpower, dessen Beitrag ich übersehen hatte. Danach habe ich Fullpowers Vorschlag durchgeführt. Leider ebenso ohne Erfolg. Das Eigenartige ist, dass ich Fullpowers Beitrag manchmal in diesem Forum einfach nicht sehen kann. ??! 😢

Fullpower

Anmeldungsdatum:
7. Juni 2013

Beiträge: 71
Zitieren
16. März 2014 13:24

Nach dem Befehl 

sudo make menuconfig

hattest du aber schon eine grafische Oberfläche? Sieht dann so aus.

http://www.directupload.net/file/d/3563/r2jmxdq4_png.htm

Und nach "make" wurden dann auch so um die 240 Module erstellt?

beffatore

(Themenstarter)

Anmeldungsdatum:
21. Februar 2014

Beiträge: 41
Zitieren
16. März 2014 14:22

Ja, ich hatte die grafische Oberfläche und habe dort, wie angegeben, die entsprechenden Punkte abgewählt. Dann habe ich die weiteren Befehle eingegeben. LG, beffatore

hakunamatata Team-Icon

Supporter
Avatar von hakunamatata

Anmeldungsdatum:
30. Juni 2009

Beiträge: 5130
Zitieren
16. März 2014 22:32 (zuletzt bearbeitet: 16. März 2014 22:33)

beffatore schrieb:

Auf:

modinfo cx8800

Folgendes:

srcversion:     DF3F923C0B7A21C1B88D88C

Auf:

modinfo cx8802

kam:

srcversion:     DF6518592F971C63CF01D0F

Diese Versionen habe ich bei mir auch erhalten. Funktionstest konnte ich nicht machen, da ich die Karte nicht besitze. Wenn danach bei nach einem Neustart bei 

dmesg

(vielleicht auch ohne Filter nach dvb und firmware) keine Aktivität erkennbar ist, versuch durch Entladen und Laden 

sudo modprobe -rfv cx8802
sudo modprobe -rfv cx8800
sudo modprobe -v cx8800
sudo modprobe -v cx8802

hier Aktivitäten manuell zu erzeugen.

beffatore schrieb:

Jetzt erhalte ich folgendes: 

1
2
3
4
toni@toni-System-Product-Name-System-Product-Name:~$ modinfo cx8800
libkmod: ERROR ../libkmod/libkmod-module.c:174 kmod_module_parse_depline: ctx=0xb8424008 path=/lib/modules/3.11.0-18-generic/kernel/drivers/media/pci/cx88/cx88xx.ko error=No such file or directory
filename:       /lib/modules/3.11.0-18-generic/kernel/drivers/media/pci/cx88/cx8800.ko
ERROR: could not get modinfo from 'cx8800': No such file or directory

Welche Schritte hast du inzwischen gemacht? Was meiner Meinung nach zumindest fehlt, ist eine Neugenerierung der Modulabhängigkeiten 

sudo depmod -a

Das sollte aber bei 

sudo make install

mitgemacht werden.

Die 12 Module, mit denen ich es im ersten Versuch einmal versucht hätte, können durchaus nicht ausreichend sein. Vielleicht funktioniert es ja mit der Variante von Fullpower. Hier werden jedenfalls wesentlich mehr Module erstellt. Auch da wäre interessant, was beim manuellen Entladen/Laden der Treiber (modprobe-Befehle von vorher) bei 

dmesg

protokolliert wird.

beffatore

(Themenstarter)

Anmeldungsdatum:
21. Februar 2014

Beiträge: 41
Zitieren
17. März 2014 14:49

sudo modprobe -rfv cx8802

1
2
3

[sudo] password for toni: 
libkmod: ERROR ../libkmod/libkmod-module.c:174 kmod_module_parse_depline: ctx=0xb9457090 path=/lib/modules/3.11.0-18-generic/kernel/drivers/media/pci/cx88/cx88xx.ko error=No such file or directory

sudo modprobe -rfv cx8800

1
2
[sudo] password for toni: 
libkmod: ERROR ../libkmod/libkmod-module.c:174 kmod_module_parse_depline: ctx=0xb8d77090 path=/lib/modules/3.11.0-18-generic/kernel/drivers/media/pci/cx88/cx88xx.ko error=No such file or directory

sudo modprobe -v cx8800

1
2
3
4
5
6

[sudo] password for toni: 
libkmod: ERROR ../libkmod/libkmod-module.c:174 kmod_module_parse_depline: ctx=0xb813e090 path=/lib/modules/3.11.0-18-generic/kernel/drivers/media/pci/cx88/cx88xx.ko error=No such file or directory
libkmod: ERROR ../libkmod/libkmod-module.c:174 kmod_module_parse_depline: ctx=0xb813e090 path=/lib/modules/3.11.0-18-generic/kernel/drivers/media/pci/cx88/cx88xx.ko error=No such file or directory
insmod /lib/modules/3.11.0-18-generic/kernel/drivers/media/pci/cx88/cx8800.ko 
ERROR: could not insert 'cx8800': Unknown symbol in module, or unknown parameter (see dmesg)

sudo modprobe -v cx8802 

1
2
3
4
5
[sudo] password for toni: 
libkmod: ERROR ../libkmod/libkmod-module.c:174 kmod_module_parse_depline: ctx=0xb78a8090 path=/lib/modules/3.11.0-18-generic/kernel/drivers/media/pci/cx88/cx88xx.ko error=No such file or directory
libkmod: ERROR ../libkmod/libkmod-module.c:174 kmod_module_parse_depline: ctx=0xb78a8090 path=/lib/modules/3.11.0-18-generic/kernel/drivers/media/pci/cx88/cx88xx.ko error=No such file or directory
insmod /lib/modules/3.11.0-18-generic/kernel/drivers/media/pci/cx88/cx8802.ko 
ERROR: could not insert 'cx8802': Unknown symbol in module, or unknown parameter (see dmesg)

dmesg 

  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
[    0.186859] pci 0000:06:00.0: PCI bridge to [bus 07]
[    0.186867] pci 0000:06:00.0:   bridge window [mem 0xf9000000-0xfaffffff]
[    0.186884] pci 0000:00:1c.7: PCI bridge to [bus 06-07]
[    0.186889] pci 0000:00:1c.7:   bridge window [mem 0xf9000000-0xfaffffff]
[    0.187173] pci 0000:06:00.0: setting latency timer to 64
[    0.187177] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.187179] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.187180] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.187182] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xffffffff]
[    0.187183] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.187185] pci_bus 0000:03: resource 1 [mem 0xfb400000-0xfb4fffff]
[    0.187186] pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
[    0.187188] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.187189] pci_bus 0000:06: resource 1 [mem 0xf9000000-0xfaffffff]
[    0.187190] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
[    0.187192] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
[    0.187193] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[    0.187194] pci_bus 0000:06: resource 7 [mem 0xbfa00000-0xffffffff]
[    0.187196] pci_bus 0000:07: resource 1 [mem 0xf9000000-0xfaffffff]
[    0.187197] pci_bus 0000:07: resource 5 [mem 0xf9000000-0xfaffffff]
[    0.187198] pci_bus 0000:07: resource 8 [io  0x0000-0x0cf7]
[    0.187200] pci_bus 0000:07: resource 9 [io  0x0d00-0xffff]
[    0.187201] pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff]
[    0.187202] pci_bus 0000:07: resource 11 [mem 0xbfa00000-0xffffffff]
[    0.187224] NET: Registered protocol family 2
[    0.187326] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.187341] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.187356] TCP: Hash tables configured (established 8192 bind 8192)
[    0.187367] TCP: reno registered
[    0.187368] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.187373] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.187409] NET: Registered protocol family 1
[    0.187592] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[    0.187605] pci 0000:00:02.0: Boot video device
[    0.441378] PCI: CLS 64 bytes, default 64
[    0.441405] Trying to unpack rootfs image as initramfs...
[    0.656555] Freeing initrd memory: 16648K (f5f6c000 - f6fae000)
[    0.656746] Scanning for low memory corruption every 60 seconds
[    0.656946] Initialise module verification
[    0.656975] audit: initializing netlink socket (disabled)
[    0.656983] type=2000 audit(1395066194.652:1): initialized
[    0.671849] bounce pool size: 64 pages
[    0.671856] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.672820] zbud: loaded
[    0.672857] VFS: Disk quotas dquot_6.5.2
[    0.672886] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.673188] fuse init (API version 7.22)
[    0.673238] msgmni has been set to 1653
[    0.673633] Key type asymmetric registered
[    0.673635] Asymmetric key parser 'x509' registered
[    0.673656] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.673686] io scheduler noop registered
[    0.673687] io scheduler deadline registered (default)
[    0.673705] io scheduler cfq registered
[    0.673778] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.673837] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.673925] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[    0.674013] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    0.674103] pcieport 0000:00:1c.6: irq 44 for MSI/MSI-X
[    0.674183] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    0.674186] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    0.674204] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.674208] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.674227] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.674229] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.674233] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.674251] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[    0.674255] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[    0.674273] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
[    0.674274] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[    0.674278] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
[    0.674286] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.674295] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.674347] intel_idle: MWAIT substates: 0x1120
[    0.674348] intel_idle: v0.4 model 0x2A
[    0.674349] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.674406] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.674410] ACPI: Power Button [PWRB]
[    0.674434] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.674436] ACPI: Power Button [PWRF]
[    0.674475] ACPI: Requesting acpi_cpufreq
[    0.675316] GHES: HEST is not enabled!
[    0.675332] isapnp: Scanning for PnP cards...
[    0.675386] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.695871] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.697130] Linux agpgart interface v0.103
[    0.698333] brd: module loaded
[    0.698868] loop: module loaded
[    0.698956] ata_piix 0000:00:1f.2: version 2.13
[    0.699026] ata_piix 0000:00:1f.2: MAP [
[    0.699027]  P0 P2 P1 P3 ]
[    0.699062] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.699273] scsi0 : ata_piix
[    0.699680] scsi1 : ata_piix
[    0.700052] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
[    0.700057] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
[    0.700116] ata_piix 0000:00:1f.5: MAP [
[    0.700117]  P0 -- P1 -- ]
[    0.700139] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[    0.700147] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.700293] scsi2 : ata_piix
[    0.700624] scsi3 : ata_piix
[    0.700926] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
[    0.700928] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
[    0.701181] libphy: Fixed MDIO Bus: probed
[    0.701263] tun: Universal TUN/TAP device driver, 1.6
[    0.701264] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.701297] PPP generic driver version 2.4.2
[    0.701334] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.701336] ehci-pci: EHCI PCI platform driver
[    0.701402] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.701409] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.701414] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.701431] ehci-pci 0000:00:1a.0: debug port 2
[    0.705338] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.705352] ehci-pci 0000:00:1a.0: irq 23, io mem 0xfb506000
[    0.717041] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.717058] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.717060] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.717062] usb usb1: Product: EHCI Host Controller
[    0.717063] usb usb1: Manufacturer: Linux 3.11.0-18-generic ehci_hcd
[    0.717065] usb usb1: SerialNumber: 0000:00:1a.0
[    0.717151] hub 1-0:1.0: USB hub found
[    0.717155] hub 1-0:1.0: 2 ports detected
[    0.717288] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    0.717295] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.717299] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.717314] ehci-pci 0000:00:1d.0: debug port 2
[    0.721194] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.721199] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb505000
[    0.733022] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.733042] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.733044] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.733045] usb usb2: Product: EHCI Host Controller
[    0.733046] usb usb2: Manufacturer: Linux 3.11.0-18-generic ehci_hcd
[    0.733047] usb usb2: SerialNumber: 0000:00:1d.0
[    0.733120] hub 2-0:1.0: USB hub found
[    0.733123] hub 2-0:1.0: 2 ports detected
[    0.733182] ehci-platform: EHCI generic platform driver
[    0.733186] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.733188] ohci-pci: OHCI PCI platform driver
[    0.733194] ohci-platform: OHCI generic platform driver
[    0.733197] uhci_hcd: USB Universal Host Controller Interface driver
[    0.733241] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.733242] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.733756] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.733812] mousedev: PS/2 mouse device common for all mice
[    0.733902] rtc_cmos 00:04: RTC can wake from S4
[    0.734017] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.734048] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.734087] device-mapper: uevent: version 1.0.3
[    0.734127] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    0.734138] platform eisa.0: Probing EISA bus 0
[    0.734140] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.734141] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.734142] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.734143] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.734145] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.734146] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.734147] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.734148] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.734149] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.734151] platform eisa.0: EISA: Detected 0 cards
[    0.734155] cpufreq-nforce2: No nForce2 chipset.
[    0.734209] cpuidle: using governor ladder
[    0.734281] cpuidle: using governor menu
[    0.734287] ledtrig-cpu: registered to indicate activity on CPUs
[    0.734344] TCP: cubic registered
[    0.734402] NET: Registered protocol family 10
[    0.734516] NET: Registered protocol family 17
[    0.734522] Key type dns_resolver registered
[    0.734649] Using IPI No-Shortcut mode
[    0.734718] PM: Hibernation image not present or could not be loaded.
[    0.734720] Loading module verification certificates
[    0.737131] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: ba5de52a9d4db1b8ef634bf8f2c56dab565140bc'
[    0.737139] registered taskstats version 1
[    0.739012] Key type trusted registered
[    0.740497] Key type encrypted registered
[    0.742029] AppArmor: AppArmor sha1 policy hashing enabled
[    0.742408]   Magic number: 6:565:384
[    0.742412] usb usb2: hash matches
[    0.742480] rtc_cmos 00:04: setting system clock to 2014-03-17 14:23:14 UTC (1395066194)
[    0.742835] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.742836] EDD information not available.
[    1.030389] isapnp: No Plug & Play device found
[    1.044828] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.177059] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.177064] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.177372] hub 2-1:1.0: USB hub found
[    1.177551] hub 2-1:1.0: 8 ports detected
[    1.288567] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.420854] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.420859] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.421164] hub 1-1:1.0: USB hub found
[    1.421328] hub 1-1:1.0: 6 ports detected
[    1.492539] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[    1.593720] usb 2-1.1: New USB device found, idVendor=04b8, idProduct=085e
[    1.593725] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.593728] usb 2-1.1: Product: EPSON Epson Stylus Office BX525WD Series
[    1.593730] usb 2-1.1: Manufacturer: EPSON
[    1.593732] usb 2-1.1: SerialNumber: 4D4754593033333285
[    1.652310] tsc: Refined TSC clocksource calibration: 3311.145 MHz
[    1.668391] usb 2-1.3: new low-speed USB device number 4 using ehci-pci
[    1.779817] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c31b
[    1.779822] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.779825] usb 2-1.3: Product: Logitech USB Keyboard
[    1.779827] usb 2-1.3: Manufacturer: Logitech
[    1.856235] usb 2-1.5: new full-speed USB device number 5 using ehci-pci
[    1.949408] usb 2-1.5: New USB device found, idVendor=062a, idProduct=0252
[    1.949413] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.949416] usb 2-1.5: Product: USB WheelMouse     
[    1.949418] usb 2-1.5: Manufacturer: Logitech 
[    2.043994] ata1.01: failed to resume link (SControl 0)
[    2.044086] ata2.01: failed to resume link (SControl 0)
[    2.199949] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.199962] ata2.01: SATA link down (SStatus 0 SControl 0)
[    2.200098] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.200114] ata1.01: SATA link down (SStatus 0 SControl 0)
[    2.200127] ata1.01: link offline, clearing class 3 to NONE
[    2.208279] ata1.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL02, max UDMA/100
[    2.209166] ata2.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
[    2.209171] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.217143] ata2.00: configured for UDMA/133
[    2.224099] ata1.00: configured for UDMA/100
[    2.234332] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS40  NL02 PQ: 0 ANSI: 5
[    2.245065] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.245069] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.245214] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.245262] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    2.245444] scsi 1:0:0:0: Direct-Access     ATA      WDC WD10EARS-00Y 80.0 PQ: 0 ANSI: 5
[    2.245559] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.245576] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.245836] sd 1:0:0:0: [sda] Write Protect is off
[    2.245842] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.246011] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.306941]  sda: sda1 sda2 < sda5 sda6 sda7 > sda3
[    2.307461] sd 1:0:0:0: [sda] Attached SCSI disk
[    2.307614] Freeing unused kernel memory: 880K (c1973000 - c1a4f000)
[    2.307647] Write protecting the kernel text: 6368k
[    2.307699] Write protecting the kernel read-only data: 2696k
[    2.307700] NX-protecting the kernel data: 5920k
[    2.316098] systemd-udevd[117]: starting version 204
[    2.336261] pata_via 0000:03:00.0: version 0.3.4
[    2.336657] scsi4 : pata_via
[    2.336750] scsi5 : pata_via
[    2.336802] ata5: PATA max UDMA/133 cmd 0xe040 ctl 0xe030 bmdma 0xe000 irq 16
[    2.336804] ata6: PATA max UDMA/133 cmd 0xe020 ctl 0xe010 bmdma 0xe008 irq 16
[    2.340464] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.340660] r8169 0000:05:00.0: irq 45 for MSI/MSI-X
[    2.340780] r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0xf8422000, bc:ae:c5:a8:bd:1e, XID 0c200000 IRQ 45
[    2.340781] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.342436] hidraw: raw HID events driver (C) Jiri Kosina
[    2.351630] usb-storage 2-1.1:1.2: USB Mass Storage device detected
[    2.351689] scsi6 : usb-storage 2-1.1:1.2
[    2.351764] usbcore: registered new interface driver usb-storage
[    2.366202] usbcore: registered new interface driver usbhid
[    2.366205] usbhid: USB HID core driver
[    2.370588] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input2
[    2.370738] hid-generic 0003:046D:C31B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-1.3/input0
[    2.373306] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input3
[    2.373381] hid-generic 0003:046D:C31B.0002: input,hidraw1: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-1.3/input1
[    2.373470] input: Logitech  USB WheelMouse      as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input4
[    2.373593] hid-generic 0003:062A:0252.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech  USB WheelMouse     ] on usb-0000:00:1d.0-1.5/input0
[    2.500392] ata5.00: ATA-7: SAMSUNG HD400LD, WQ100-14, max UDMA/100
[    2.500398] ata5.00: 781422768 sectors, multi 16: LBA48 
[    2.508444] ata5.00: configured for UDMA/100
[    2.508664] scsi 4:0:0:0: Direct-Access     ATA      SAMSUNG HD400LD  WQ10 PQ: 0 ANSI: 5
[    2.508854] sd 4:0:0:0: [sdb] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[    2.508877] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    2.508948] sd 4:0:0:0: [sdb] Write Protect is off
[    2.508950] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.509006] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.541755]  sdb: sdb1 sdb2 < > sdb3 sdb4
[    2.542103] sd 4:0:0:0: [sdb] Attached SCSI disk
[    2.651485] Switched to clocksource tsc
[    3.353795] scsi 6:0:0:0: Direct-Access     EPSON    Storage          1.00 PQ: 0 ANSI: 2
[    3.354043] sd 6:0:0:0: Attached scsi generic sg3 type 0
[    3.365343] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    3.594339] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
[    3.594341] EXT4-fs (sda6): write access will be enabled during recovery
[    4.445385] EXT4-fs (sda6): recovery complete
[    4.451013] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   17.126522] Adding 4103164k swap on /dev/sda7.  Priority:-1 extents:1 across:4103164k FS
[   17.256160] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.356839] systemd-udevd[289]: starting version 204
[   17.883543] WARNING! power/level is deprecated; use power/control instead
[   17.947381] type=1400 audit(1395062611.716:2): apparmor="STATUS" operation="profile_load" parent=328 profile="unconfined" name="/sbin/dhclient" pid=347 comm="apparmor_parser"
[   17.947386] type=1400 audit(1395062611.716:3): apparmor="STATUS" operation="profile_load" parent=328 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=347 comm="apparmor_parser"
[   17.947389] type=1400 audit(1395062611.716:4): apparmor="STATUS" operation="profile_load" parent=328 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=347 comm="apparmor_parser"
[   17.947812] type=1400 audit(1395062611.716:5): apparmor="STATUS" operation="profile_replace" parent=328 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=347 comm="apparmor_parser"
[   17.947817] type=1400 audit(1395062611.716:6): apparmor="STATUS" operation="profile_replace" parent=328 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=347 comm="apparmor_parser"
[   17.948043] type=1400 audit(1395062611.716:7): apparmor="STATUS" operation="profile_replace" parent=328 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=347 comm="apparmor_parser"
[   18.098239] parport_pc 00:02: reported by Plug and Play ACPI
[   18.098293] parport0: PC-style at 0x378, irq 5 [PCSPP]
[   18.277272] lp0: using parport0 (interrupt-driven).
[   18.310072] ACPI Warning: 0x00000540-0x0000054f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20130517/utaddress-251)
[   18.310077] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.310078] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20130517/utaddress-251)
[   18.310081] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.310082] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20130517/utaddress-251)
[   18.310084] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \_GPE.GPIO 2 (20130517/utaddress-251)
[   18.310086] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.310087] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   18.322848] mei_me 0000:00:16.0: setting latency timer to 64
[   18.322885] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
[   18.332112] usblp 2-1.1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04B8 pid 0x085E
[   18.332148] usbcore: registered new interface driver usblp
[   18.332655] wmi: Mapper loaded
[   18.507786] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x6
[   18.694341] [drm] Initialized drm 1.1.0 20060810
[   19.028399] [drm] Memory usable by graphics device = 2048M
[   19.028405] i915 0000:00:02.0: setting latency timer to 64
[   19.028562] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[   19.028568] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   19.028568] [drm] Driver supports precise vblank timestamp query.
[   19.028606] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   19.036852] [drm] Wrong MCH_SSKPD value: 0x16040307
[   19.036854] [drm] This can cause pipe underruns and display issues.
[   19.036855] [drm] Please upgrade your BIOS to fix this.
[   19.070801] fbcon: inteldrmfb (fb0) is primary device
[   19.077274] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x6
[   19.079522] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x6
[   19.079953] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x6
[   19.080442] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   19.104304] ppdev: user-space parallel port driver
[   19.275071] asus_wmi: ASUS WMI generic driver loaded
[   19.277591] Console: switching to colour frame buffer device 160x64
[   19.280763] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   19.280764] i915 0000:00:02.0: registered panic notifier
[   19.282135] acpi device:37: registered as cooling_device4
[   19.282292] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   19.282333] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[   19.282706] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   19.297855] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[   19.326460] asus_wmi: Initialization: 0x0
[   19.326487] asus_wmi: BIOS WMI version: 0.9
[   19.326571] asus_wmi: SFUN value: 0x0
[   19.327632] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input6
[   19.331523] asus_wmi: Backlight controlled by ACPI video driver
[   19.365704] SKU: Nid=0x1d sku_cfg=0x4004c601
[   19.365707] SKU: port_connectivity=0x1
[   19.365708] SKU: enable_pcbeep=0x0
[   19.365709] SKU: check_sum=0x00000004
[   19.365709] SKU: customization=0x000000c6
[   19.365710] SKU: external_amp=0x0
[   19.365711] SKU: platform_type=0x0
[   19.365712] SKU: swap=0x0
[   19.365712] SKU: override=0x1
[   19.366031] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   19.366033]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   19.366034]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   19.366034]    mono: mono_out=0x0
[   19.366035]    dig-out=0x11/0x1e
[   19.366036]    inputs:
[   19.366037]      Front Mic=0x19
[   19.366038]      Rear Mic=0x18
[   19.366039]      Line=0x1a
[   19.366040] realtek: No valid SSID, checking pincfg 0x4004c601 for NID 0x1d
[   19.366041] realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0887
[   19.440927] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   19.440988] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   19.441039] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   19.441084] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   19.441127] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   19.441168] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   19.549437] kvm: disabled by bios
[   19.565964] kvm: disabled by bios
[   19.586478] kvm: disabled by bios
[   19.593790] kvm: disabled by bios
[   20.800627] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   21.669783] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   21.940848] init: failsafe main process (645) killed by TERM signal
[   22.891387] type=1400 audit(1395062616.664:8): apparmor="STATUS" operation="profile_replace" parent=800 profile="unconfined" name="/sbin/dhclient" pid=808 comm="apparmor_parser"
[   22.891396] type=1400 audit(1395062616.664:9): apparmor="STATUS" operation="profile_replace" parent=800 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=808 comm="apparmor_parser"
[   22.891402] type=1400 audit(1395062616.664:10): apparmor="STATUS" operation="profile_replace" parent=800 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=808 comm="apparmor_parser"
[   22.891924] type=1400 audit(1395062616.664:11): apparmor="STATUS" operation="profile_load" parent=800 profile="unconfined" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=805 comm="apparmor_parser"
[   22.949318] audit_printk_skb: 120 callbacks suppressed
[   22.949322] type=1400 audit(1395062616.724:52): apparmor="STATUS" operation="profile_replace" parent=800 profile="unconfined" name="sanitized_helper" pid=809 comm="apparmor_parser"
[   22.951986] type=1400 audit(1395062616.724:53): apparmor="STATUS" operation="profile_replace" parent=800 profile="unconfined" name="/usr/bin/evince-previewer" pid=809 comm="apparmor_parser"
[   22.970522] type=1400 audit(1395062616.744:54): apparmor="STATUS" operation="profile_replace" parent=800 profile="unconfined" name="sanitized_helper" pid=809 comm="apparmor_parser"
[   22.970529] type=1400 audit(1395062616.744:55): apparmor="STATUS" operation="profile_replace" parent=800 profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=809 comm="apparmor_parser"
[   22.989885] type=1400 audit(1395062616.760:56): apparmor="STATUS" operation="profile_replace" parent=800 profile="unconfined" name="sanitized_helper" pid=809 comm="apparmor_parser"
[   22.994103] type=1400 audit(1395062616.764:57): apparmor="STATUS" operation="profile_replace" parent=800 profile="unconfined" name="sanitized_helper" pid=809 comm="apparmor_parser"
[   22.994110] type=1400 audit(1395062616.764:58): apparmor="STATUS" operation="profile_replace" parent=800 profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=809 comm="apparmor_parser"
[   23.006787] type=1400 audit(1395062616.780:59): apparmor="STATUS" operation="profile_replace" parent=800 profile="unconfined" name="sanitized_helper" pid=809 comm="apparmor_parser"
[   23.007912] type=1400 audit(1395062616.780:60): apparmor="STATUS" operation="profile_replace" parent=800 profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=809 comm="apparmor_parser"
[   23.025310] type=1400 audit(1395062616.800:61): apparmor="STATUS" operation="profile_replace" parent=800 profile="unconfined" name="sanitized_helper" pid=809 comm="apparmor_parser"
[   23.048884] Bluetooth: Core ver 2.16
[   23.048897] NET: Registered protocol family 31
[   23.048898] Bluetooth: HCI device and connection manager initialized
[   23.048904] Bluetooth: HCI socket layer initialized
[   23.048906] Bluetooth: L2CAP socket layer initialized
[   23.048910] Bluetooth: SCO socket layer initialized
[   23.129816] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   23.129819] Bluetooth: BNEP filters: protocol multicast
[   23.129825] Bluetooth: BNEP socket layer initialized
[   23.149085] Bluetooth: RFCOMM TTY layer initialized
[   23.149094] Bluetooth: RFCOMM socket layer initialized
[   23.149095] Bluetooth: RFCOMM ver 1.11
[   23.378891] init: avahi-cups-reload main process (868) terminated with status 1
[   24.275458] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   24.277027] vboxdrv: Found 4 processor cores.
[   24.277789] vboxdrv: fAsync=0 offMin=0x259 offMax=0x2063
[   24.277843] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   24.277844] vboxdrv: Successfully loaded version 4.2.16_Ubuntu (interface 0x001a0005).
[   24.561993] vboxpci: IOMMU not found (not registered)
[   25.284340] r8169 0000:05:00.0 eth0: link down
[   25.284352] r8169 0000:05:00.0 eth0: link down
[   25.284379] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   25.284625] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.848263] r8169 0000:05:00.0 eth0: link up
[   26.848274] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
toni@toni-System-Product-Name-System-Product-Name:~$

☹

Schöne Grüße, beffatore

hakunamatata Team-Icon

Supporter
Avatar von hakunamatata

Anmeldungsdatum:
30. Juni 2009

Beiträge: 5130
Zitieren
17. März 2014 16:58

Bei hartnäckigen Problemen würde ich einmal alles in den Urzustand rückversetzen: 

sudo apt-get install linux-image-$(uname -r) linux-image-extra-$(uname -r) linux-headers-$(uname -r)
cd liplianin-s2-liplianin-v39-4c01a16b6237
make distclean

und dann entweder bei der Anleitung von Fullpower weitermachen: 

sudo make menuconfig

ODER bei meiner Variante: 

wget http://media.cdn.ubuntu-de.org/forum/attachments/40/08/6404102-config -O v4l/.config

und dann die Installation fortsetzen: 

make
sudo make install
sudo reboot

Sollten während der Installation Fehler auftreten, bitte hier posten. Wenn nicht, nach dem Neustart mit 

dmesg

den Erfolg prüfen.

Fullpower

Anmeldungsdatum:
7. Juni 2013

Beiträge: 71
Zitieren
17. März 2014 17:42

Hallo,

hier nur mal zum Vergleich, bei mir sehen die Versionen anders aus kann allerdings auch nicht testen,

da ich die Tevii s464 auch nicht habe. Aber ich brauche auch die Liplianin v39 Treiber.

Ich würde mir auch noch mal frische Liplianin-Treiber herunterladen und die Alten löschen.

Ich habe da so eine Ahnung, bin mir aber nicht sicher könnte mit den Kernel-Versionen und den patches zu tun haben.

hakunamatata kennt sich da sicher besser aus.

druide@druide-System-Product-Name ~ $ modinfo cx8800
filename:       /lib/modules/3.11.0-18-generic/kernel/drivers/media/pci/cx88/cx8800.ko
version:        0.0.9
license:        GPL
author:         Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
description:    v4l2 driver module for cx2388x based TV cards
srcversion:     3DD106D15A14A56221FAFA9
alias:          pci:v000014F1d00008800sv*sd*bc*sc*i*
depends:        videobuf-core,videobuf-dma-sg,videodev,cx88xx,v4l2-common,btcx-risc
intree:         Y
vermagic:       3.11.0-18-generic SMP mod_unload modversions 686 
parm:           vbibufs:number of vbi buffers, range 2-32 (int)
parm:           vbi_debug:enable debug messages [vbi] (int)
parm:           video_nr:video device numbers (array of int)
parm:           vbi_nr:vbi device numbers (array of int)
parm:           radio_nr:radio device numbers (array of int)
parm:           video_debug:enable debug messages [video] (int)
parm:           irq_debug:enable debug messages [IRQ handler] (int)
parm:           vid_limit:capture memory limit in megabytes (int)

druide@druide-System-Product-Name ~ $ modinfo cx8802
filename:       /lib/modules/3.11.0-18-generic/kernel/drivers/media/pci/cx88/cx8802.ko
version:        0.0.9
license:        GPL
author:         Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
author:         Chris Pascoe <c.pascoe@itee.uq.edu.au>
author:         Jelle Foks <jelle@foks.us>
description:    mpeg driver for cx2388x based TV cards
srcversion:     EDDB802FB9E255EC4C93A9A
alias:          pci:v000014F1d00008802sv*sd*bc*sc*i*
depends:        videobuf-dma-sg,cx88xx,videobuf-core,btcx-risc
intree:         Y
vermagic:       3.11.0-18-generic SMP mod_unload modversions 686 
parm:           debug:enable debug messages [mpeg] (int)
druide@druide-System-Product-Name ~ $

hakunamatata Team-Icon

Supporter
Avatar von hakunamatata

Anmeldungsdatum:
30. Juni 2009

Beiträge: 5130
Zitieren
17. März 2014 19:34

Fullpower schrieb:

Ich würde mir auch noch mal frische Liplianin-Treiber herunterladen und die Alten löschen.

Ist auch eine Möglichkeit. Mir ist noch aufgefallen, dass in der Anleitung 

sudo make menuconfig

steht. Das müsste dann auch mit 

sudo make distclean

bei Bedarf gesäubert werden.

Fullpower schrieb:

Multimedia support –→ Camera/video grabbers support, Analog TV support, AM/FM radio support abwählen (Space Taste) dann Save und Exit.

Habe diese Konfiguration auch ausprobiert. Hier wird meiner Meinung nach für die Tevii S464 zu viel deaktiviert und einige wesentliche Module fehlen.

Deshalb würde ich vorschlagen, es noch einmal so zu versuchen: 

sudo apt-get install linux-image-$(uname -r) linux-image-extra-$(uname -r) linux-headers-$(uname -r)
cd liplianin-s2-liplianin-v39-4c01a16b6237
sudo make distclean
wget http://media.cdn.ubuntu-de.org/forum/attachments/40/08/6404102-config -O v4l/.config
make
sudo make install
sudo reboot

und dann bei Bedarf fehlende Module noch anhand der Fehlermeldungen bei: 

dmesg

zu ergänzen.

Fullpower schrieb:

hakunamatata kennt sich da sicher besser aus.

Nicht unbedingt.

beffatore

(Themenstarter)

Anmeldungsdatum:
21. Februar 2014

Beiträge: 41
Zitieren
17. März 2014 20:37

Ich hab mich jetzt an den letzten Hakumamatata-Beitrag gehalten (Der vorletzte hat's leider auch nicht gebracht). Überprüfung:

  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
[    0.187210] pci 0000:06:00.0: setting latency timer to 64
[    0.187214] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.187216] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.187217] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.187219] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xffffffff]
[    0.187220] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.187222] pci_bus 0000:03: resource 1 [mem 0xfb400000-0xfb4fffff]
[    0.187223] pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
[    0.187225] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.187226] pci_bus 0000:06: resource 1 [mem 0xf9000000-0xfaffffff]
[    0.187228] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
[    0.187229] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
[    0.187230] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[    0.187231] pci_bus 0000:06: resource 7 [mem 0xbfa00000-0xffffffff]
[    0.187233] pci_bus 0000:07: resource 1 [mem 0xf9000000-0xfaffffff]
[    0.187234] pci_bus 0000:07: resource 5 [mem 0xf9000000-0xfaffffff]
[    0.187236] pci_bus 0000:07: resource 8 [io  0x0000-0x0cf7]
[    0.187237] pci_bus 0000:07: resource 9 [io  0x0d00-0xffff]
[    0.187238] pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff]
[    0.187239] pci_bus 0000:07: resource 11 [mem 0xbfa00000-0xffffffff]
[    0.187261] NET: Registered protocol family 2
[    0.187362] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.187377] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.187392] TCP: Hash tables configured (established 8192 bind 8192)
[    0.187403] TCP: reno registered
[    0.187404] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.187409] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.187443] NET: Registered protocol family 1
[    0.187627] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[    0.187640] pci 0000:00:02.0: Boot video device
[    0.441413] PCI: CLS 64 bytes, default 64
[    0.441439] Trying to unpack rootfs image as initramfs...
[    0.656617] Freeing initrd memory: 16648K (f5f6c000 - f6fae000)
[    0.656807] Scanning for low memory corruption every 60 seconds
[    0.657007] Initialise module verification
[    0.657036] audit: initializing netlink socket (disabled)
[    0.657044] type=2000 audit(1395088290.652:1): initialized
[    0.671914] bounce pool size: 64 pages
[    0.671921] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.672884] zbud: loaded
[    0.672920] VFS: Disk quotas dquot_6.5.2
[    0.672949] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.673262] fuse init (API version 7.22)
[    0.673312] msgmni has been set to 1653
[    0.673713] Key type asymmetric registered
[    0.673715] Asymmetric key parser 'x509' registered
[    0.673735] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.673767] io scheduler noop registered
[    0.673768] io scheduler deadline registered (default)
[    0.673786] io scheduler cfq registered
[    0.673858] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.673917] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.674006] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[    0.674093] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    0.674182] pcieport 0000:00:1c.6: irq 44 for MSI/MSI-X
[    0.674263] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    0.674265] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    0.674283] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.674288] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.674308] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.674309] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.674314] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.674332] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[    0.674336] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[    0.674354] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
[    0.674355] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[    0.674359] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
[    0.674367] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.674377] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.674428] intel_idle: MWAIT substates: 0x1120
[    0.674430] intel_idle: v0.4 model 0x2A
[    0.674430] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.674488] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.674492] ACPI: Power Button [PWRB]
[    0.674516] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.674517] ACPI: Power Button [PWRF]
[    0.674558] ACPI: Requesting acpi_cpufreq
[    0.675392] GHES: HEST is not enabled!
[    0.675408] isapnp: Scanning for PnP cards...
[    0.675462] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.695940] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.697204] Linux agpgart interface v0.103
[    0.698411] brd: module loaded
[    0.698946] loop: module loaded
[    0.699033] ata_piix 0000:00:1f.2: version 2.13
[    0.699105] ata_piix 0000:00:1f.2: MAP [
[    0.699106]  P0 P2 P1 P3 ]
[    0.699140] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.699352] scsi0 : ata_piix
[    0.699759] scsi1 : ata_piix
[    0.700131] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
[    0.700137] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
[    0.700196] ata_piix 0000:00:1f.5: MAP [
[    0.700197]  P0 -- P1 -- ]
[    0.700219] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[    0.700227] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.700374] scsi2 : ata_piix
[    0.700704] scsi3 : ata_piix
[    0.701005] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
[    0.701006] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
[    0.701259] libphy: Fixed MDIO Bus: probed
[    0.701341] tun: Universal TUN/TAP device driver, 1.6
[    0.701343] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.701376] PPP generic driver version 2.4.2
[    0.701413] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.701415] ehci-pci: EHCI PCI platform driver
[    0.701481] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.701488] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.701493] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.701510] ehci-pci 0000:00:1a.0: debug port 2
[    0.705415] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.705429] ehci-pci 0000:00:1a.0: irq 23, io mem 0xfb506000
[    0.717076] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.717092] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.717094] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.717096] usb usb1: Product: EHCI Host Controller
[    0.717098] usb usb1: Manufacturer: Linux 3.11.0-18-generic ehci_hcd
[    0.717100] usb usb1: SerialNumber: 0000:00:1a.0
[    0.717188] hub 1-0:1.0: USB hub found
[    0.717191] hub 1-0:1.0: 2 ports detected
[    0.717326] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    0.717332] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.717336] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.717351] ehci-pci 0000:00:1d.0: debug port 2
[    0.721241] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.721246] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb505000
[    0.733062] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.733083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.733085] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.733086] usb usb2: Product: EHCI Host Controller
[    0.733087] usb usb2: Manufacturer: Linux 3.11.0-18-generic ehci_hcd
[    0.733089] usb usb2: SerialNumber: 0000:00:1d.0
[    0.733162] hub 2-0:1.0: USB hub found
[    0.733165] hub 2-0:1.0: 2 ports detected
[    0.733223] ehci-platform: EHCI generic platform driver
[    0.733228] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.733229] ohci-pci: OHCI PCI platform driver
[    0.733235] ohci-platform: OHCI generic platform driver
[    0.733238] uhci_hcd: USB Universal Host Controller Interface driver
[    0.733282] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.733283] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.733796] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.733863] mousedev: PS/2 mouse device common for all mice
[    0.733961] rtc_cmos 00:04: RTC can wake from S4
[    0.734079] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.734111] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.734150] device-mapper: uevent: version 1.0.3
[    0.734190] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    0.734201] platform eisa.0: Probing EISA bus 0
[    0.734202] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.734204] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.734205] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.734206] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.734208] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.734209] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.734210] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.734211] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.734212] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.734213] platform eisa.0: EISA: Detected 0 cards
[    0.734218] cpufreq-nforce2: No nForce2 chipset.
[    0.734272] cpuidle: using governor ladder
[    0.734344] cpuidle: using governor menu
[    0.734350] ledtrig-cpu: registered to indicate activity on CPUs
[    0.734408] TCP: cubic registered
[    0.734466] NET: Registered protocol family 10
[    0.734580] NET: Registered protocol family 17
[    0.734586] Key type dns_resolver registered
[    0.734714] Using IPI No-Shortcut mode
[    0.734781] PM: Hibernation image not present or could not be loaded.
[    0.734783] Loading module verification certificates
[    0.737193] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: ba5de52a9d4db1b8ef634bf8f2c56dab565140bc'
[    0.737201] registered taskstats version 1
[    0.738946] Key type trusted registered
[    0.740186] Key type encrypted registered
[    0.741436] AppArmor: AppArmor sha1 policy hashing enabled
[    0.741826]   Magic number: 6:857:548
[    0.741838] tty ttyS24: hash matches
[    0.741900] rtc_cmos 00:04: setting system clock to 2014-03-17 20:31:30 UTC (1395088290)
[    0.742262] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.742263] EDD information not available.
[    1.028820] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.030436] isapnp: No Plug & Play device found
[    1.161154] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.161159] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.161469] hub 1-1:1.0: USB hub found
[    1.161640] hub 1-1:1.0: 6 ports detected
[    1.272617] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.404948] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.404953] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.405257] hub 2-1:1.0: USB hub found
[    1.405433] hub 2-1:1.0: 8 ports detected
[    1.652345] tsc: Refined TSC clocksource calibration: 3311.145 MHz
[    1.676466] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[    1.777615] usb 2-1.1: New USB device found, idVendor=04b8, idProduct=085e
[    1.777620] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.777623] usb 2-1.1: Product: EPSON Epson Stylus Office BX525WD Series
[    1.777625] usb 2-1.1: Manufacturer: EPSON
[    1.777628] usb 2-1.1: SerialNumber: 4D4754593033333285
[    1.852320] usb 2-1.3: new low-speed USB device number 4 using ehci-pci
[    1.963739] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c31b
[    1.963744] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.963747] usb 2-1.3: Product: Logitech USB Keyboard
[    1.963750] usb 2-1.3: Manufacturer: Logitech
[    2.040162] usb 2-1.5: new full-speed USB device number 5 using ehci-pci
[    2.044022] ata1.01: failed to resume link (SControl 0)
[    2.044111] ata2.01: failed to resume link (SControl 0)
[    2.133332] usb 2-1.5: New USB device found, idVendor=062a, idProduct=0252
[    2.133337] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.133340] usb 2-1.5: Product: USB WheelMouse     
[    2.133342] usb 2-1.5: Manufacturer: Logitech 
[    2.199978] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.199992] ata2.01: SATA link down (SStatus 0 SControl 0)
[    2.200130] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.200146] ata1.01: SATA link down (SStatus 0 SControl 0)
[    2.200159] ata1.01: link offline, clearing class 3 to NONE
[    2.208317] ata1.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL02, max UDMA/100
[    2.208841] ata2.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
[    2.208847] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.216822] ata2.00: configured for UDMA/133
[    2.224134] ata1.00: configured for UDMA/100
[    2.234366] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS40  NL02 PQ: 0 ANSI: 5
[    2.245095] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.245099] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.245239] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.245296] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    2.245478] scsi 1:0:0:0: Direct-Access     ATA      WDC WD10EARS-00Y 80.0 PQ: 0 ANSI: 5
[    2.245595] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.245613] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.245868] sd 1:0:0:0: [sda] Write Protect is off
[    2.245874] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.246041] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.310801]  sda: sda1 sda2 < sda5 sda6 sda7 > sda3
[    2.311252] sd 1:0:0:0: [sda] Attached SCSI disk
[    2.311431] Freeing unused kernel memory: 880K (c1973000 - c1a4f000)
[    2.311463] Write protecting the kernel text: 6368k
[    2.311506] Write protecting the kernel read-only data: 2696k
[    2.311507] NX-protecting the kernel data: 5920k
[    2.319480] systemd-udevd[117]: starting version 204
[    2.337999] pata_via 0000:03:00.0: version 0.3.4
[    2.338364] scsi4 : pata_via
[    2.338469] scsi5 : pata_via
[    2.338521] ata5: PATA max UDMA/133 cmd 0xe040 ctl 0xe030 bmdma 0xe000 irq 16
[    2.338523] ata6: PATA max UDMA/133 cmd 0xe020 ctl 0xe010 bmdma 0xe008 irq 16
[    2.343412] hidraw: raw HID events driver (C) Jiri Kosina
[    2.351648] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.351887] r8169 0000:05:00.0: irq 45 for MSI/MSI-X
[    2.352052] r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0xf8416000, bc:ae:c5:a8:bd:1e, XID 0c200000 IRQ 45
[    2.352056] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.352566] usb-storage 2-1.1:1.2: USB Mass Storage device detected
[    2.352660] scsi6 : usb-storage 2-1.1:1.2
[    2.352730] usbcore: registered new interface driver usb-storage
[    2.367941] usbcore: registered new interface driver usbhid
[    2.367943] usbhid: USB HID core driver
[    2.370892] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input2
[    2.371743] hid-generic 0003:046D:C31B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-1.3/input0
[    2.373595] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input3
[    2.373697] hid-generic 0003:046D:C31B.0002: input,hidraw1: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-1.3/input1
[    2.373775] input: Logitech  USB WheelMouse      as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input4
[    2.374001] hid-generic 0003:062A:0252.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech  USB WheelMouse     ] on usb-0000:00:1d.0-1.5/input0
[    2.500491] ata5.00: ATA-7: SAMSUNG HD400LD, WQ100-14, max UDMA/100
[    2.500496] ata5.00: 781422768 sectors, multi 16: LBA48 
[    2.508483] ata5.00: configured for UDMA/100
[    2.508703] scsi 4:0:0:0: Direct-Access     ATA      SAMSUNG HD400LD  WQ10 PQ: 0 ANSI: 5
[    2.508913] sd 4:0:0:0: [sdb] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[    2.508934] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    2.508992] sd 4:0:0:0: [sdb] Write Protect is off
[    2.508996] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.509046] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.537784]  sdb: sdb1 sdb2 < > sdb3 sdb4
[    2.538445] sd 4:0:0:0: [sdb] Attached SCSI disk
[    2.651699] Switched to clocksource tsc
[    3.353745] scsi 6:0:0:0: Direct-Access     EPSON    Storage          1.00 PQ: 0 ANSI: 2
[    3.353938] sd 6:0:0:0: Attached scsi generic sg3 type 0
[    3.365548] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    3.641622] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
[    3.641624] EXT4-fs (sda6): write access will be enabled during recovery
[    5.259792] EXT4-fs (sda6): recovery complete
[    5.265406] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   17.863217] Adding 4103164k swap on /dev/sda7.  Priority:-1 extents:1 across:4103164k FS
[   17.992948] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.067376] systemd-udevd[289]: starting version 204
[   18.513374] WARNING! power/level is deprecated; use power/control instead
[   18.605089] type=1400 audit(1395084708.375:2): apparmor="STATUS" operation="profile_load" parent=340 profile="unconfined" name="/sbin/dhclient" pid=347 comm="apparmor_parser"
[   18.605095] type=1400 audit(1395084708.375:3): apparmor="STATUS" operation="profile_load" parent=340 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=347 comm="apparmor_parser"
[   18.605098] type=1400 audit(1395084708.375:4): apparmor="STATUS" operation="profile_load" parent=340 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=347 comm="apparmor_parser"
[   18.605523] type=1400 audit(1395084708.375:5): apparmor="STATUS" operation="profile_replace" parent=340 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=347 comm="apparmor_parser"
[   18.605527] type=1400 audit(1395084708.375:6): apparmor="STATUS" operation="profile_replace" parent=340 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=347 comm="apparmor_parser"
[   18.605753] type=1400 audit(1395084708.375:7): apparmor="STATUS" operation="profile_replace" parent=340 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=347 comm="apparmor_parser"
[   18.712524] parport_pc 00:02: reported by Plug and Play ACPI
[   18.712582] parport0: PC-style at 0x378, irq 5 [PCSPP]
[   18.815486] wmi: Mapper loaded
[   18.896931] lp0: using parport0 (interrupt-driven).
[   18.913445] ACPI Warning: 0x00000540-0x0000054f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20130517/utaddress-251)
[   18.913452] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.913454] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20130517/utaddress-251)
[   18.913457] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.913459] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20130517/utaddress-251)
[   18.913461] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \_GPE.GPIO 2 (20130517/utaddress-251)
[   18.913463] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.913464] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   18.926271] mei_me 0000:00:16.0: setting latency timer to 64
[   18.926302] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
[   18.935574] usblp 2-1.1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04B8 pid 0x085E
[   18.935611] usbcore: registered new interface driver usblp
[   19.145212] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x6
[   19.212087] v4l2_common: module verification failed: signature and/or required key missing - tainting kernel
[   19.212109] v4l2_common: Unknown symbol v4l2_subdev_init (err 0)
[   19.212114] v4l2_common: Unknown symbol v4l2_device_register_subdev (err 0)
[   19.212121] v4l2_common: Unknown symbol v4l2_ctrl_get_menu (err 0)
[   19.212124] v4l2_common: Unknown symbol v4l2_ctrl_fill (err 0)
[   19.212186] v4l2_common: Unknown symbol v4l2_subdev_init (err 0)
[   19.212192] v4l2_common: Unknown symbol v4l2_device_register_subdev (err 0)
[   19.212202] v4l2_common: Unknown symbol v4l2_ctrl_get_menu (err 0)
[   19.212207] v4l2_common: Unknown symbol v4l2_ctrl_fill (err 0)
[   19.336477] [drm] Initialized drm 1.1.0 20060810
[   19.609463] [drm] Memory usable by graphics device = 2048M
[   19.609469] i915 0000:00:02.0: setting latency timer to 64
[   19.609627] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[   19.609633] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   19.609634] [drm] Driver supports precise vblank timestamp query.
[   19.609673] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   19.618236] [drm] Wrong MCH_SSKPD value: 0x16040307
[   19.618238] [drm] This can cause pipe underruns and display issues.
[   19.618239] [drm] Please upgrade your BIOS to fix this.
[   19.647304] fbcon: inteldrmfb (fb0) is primary device
[   19.723024] ppdev: user-space parallel port driver
[   19.823267] asus_wmi: ASUS WMI generic driver loaded
[   19.844977] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x6
[   19.847259] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x6
[   19.847677] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x6
[   19.848126] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   19.849298] asus_wmi: Initialization: 0x0
[   19.849314] asus_wmi: BIOS WMI version: 0.9
[   19.849346] asus_wmi: SFUN value: 0x0
[   19.849593] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
[   19.850192] asus_wmi: Backlight controlled by ACPI video driver
[   19.853096] Console: switching to colour frame buffer device 160x64
[   19.856275] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   19.856276] i915 0000:00:02.0: registered panic notifier
[   19.857303] acpi device:37: registered as cooling_device4
[   19.857461] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   19.857506] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[   19.857562] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   19.857697] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[   19.935721] SKU: Nid=0x1d sku_cfg=0x4004c601
[   19.935723] SKU: port_connectivity=0x1
[   19.935724] SKU: enable_pcbeep=0x0
[   19.935725] SKU: check_sum=0x00000004
[   19.935726] SKU: customization=0x000000c6
[   19.935726] SKU: external_amp=0x0
[   19.935727] SKU: platform_type=0x0
[   19.935728] SKU: swap=0x0
[   19.935729] SKU: override=0x1
[   19.936049] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   19.936051]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   19.936053]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   19.936054]    mono: mono_out=0x0
[   19.936055]    dig-out=0x11/0x1e
[   19.936056]    inputs:
[   19.936057]      Front Mic=0x19
[   19.936058]      Rear Mic=0x18
[   19.936059]      Line=0x1a
[   19.936060] realtek: No valid SSID, checking pincfg 0x4004c601 for NID 0x1d
[   19.936061] realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0887
[   20.010501] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   20.010574] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   20.010636] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   20.010698] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   20.010754] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   20.010811] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   20.335583] kvm: disabled by bios
[   20.369248] kvm: disabled by bios
[   20.401072] kvm: disabled by bios
[   20.800743] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   22.105754] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   22.188899] init: failsafe main process (647) killed by TERM signal
[   22.873894] Bluetooth: Core ver 2.16
[   22.873911] NET: Registered protocol family 31
[   22.873913] Bluetooth: HCI device and connection manager initialized
[   22.873920] Bluetooth: HCI socket layer initialized
[   22.873923] Bluetooth: L2CAP socket layer initialized
[   22.873928] Bluetooth: SCO socket layer initialized
[   22.908767] Bluetooth: RFCOMM TTY layer initialized
[   22.908775] Bluetooth: RFCOMM socket layer initialized
[   22.908776] Bluetooth: RFCOMM ver 1.11
[   22.945010] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   22.945012] Bluetooth: BNEP filters: protocol multicast
[   22.945018] Bluetooth: BNEP socket layer initialized
[   23.342441] init: avahi-cups-reload main process (736) terminated with status 1
[   23.550388] type=1400 audit(1395084713.323:8): apparmor="STATUS" operation="profile_load" parent=744 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=750 comm="apparmor_parser"
[   23.550394] type=1400 audit(1395084713.323:9): apparmor="STATUS" operation="profile_load" parent=744 profile="unconfined" name="/usr/sbin/cupsd" pid=750 comm="apparmor_parser"
[   23.550880] type=1400 audit(1395084713.323:10): apparmor="STATUS" operation="profile_replace" parent=744 profile="unconfined" name="/usr/sbin/cupsd" pid=750 comm="apparmor_parser"
[   24.183017] type=1400 audit(1395084713.955:11): apparmor="STATUS" operation="profile_load" parent=840 profile="unconfined" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=845 comm="apparmor_parser"
[   24.183024] type=1400 audit(1395084713.955:12): apparmor="STATUS" operation="profile_load" parent=840 profile="unconfined" name="chromium_browser" pid=845 comm="apparmor_parser"
[   24.183082] type=1400 audit(1395084713.955:13): apparmor="STATUS" operation="profile_replace" parent=840 profile="unconfined" name="/sbin/dhclient" pid=848 comm="apparmor_parser"
[   24.183087] type=1400 audit(1395084713.955:14): apparmor="STATUS" operation="profile_replace" parent=840 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=848 comm="apparmor_parser"
[   24.183091] type=1400 audit(1395084713.955:15): apparmor="STATUS" operation="profile_replace" parent=840 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=848 comm="apparmor_parser"
[   24.183376] type=1400 audit(1395084713.955:16): apparmor="STATUS" operation="profile_replace" parent=840 profile="unconfined" name="chromium_browser" pid=845 comm="apparmor_parser"
[   24.183516] type=1400 audit(1395084713.955:17): apparmor="STATUS" operation="profile_replace" parent=840 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=848 comm="apparmor_parser"
[   24.183519] type=1400 audit(1395084713.955:18): apparmor="STATUS" operation="profile_replace" parent=840 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=848 comm="apparmor_parser"
[   24.183792] type=1400 audit(1395084713.955:19): apparmor="STATUS" operation="profile_replace" parent=840 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=848 comm="apparmor_parser"
[   24.186380] type=1400 audit(1395084713.959:20): apparmor="STATUS" operation="profile_load" parent=840 profile="unconfined" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=847 comm="apparmor_parser"
[   25.313496] vboxdrv: Found 4 processor cores.
[   25.313605] vboxdrv: fAsync=0 offMin=0x20b offMax=0xb99
[   25.313668] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   25.313670] vboxdrv: Successfully loaded version 4.2.16_Ubuntu (interface 0x001a0005).
[   25.324337] r8169 0000:05:00.0 eth0: link down
[   25.324370] r8169 0000:05:00.0 eth0: link down
[   25.324372] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   25.324587] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   25.620683] vboxpci: IOMMU not found (not registered)
[   26.885039] r8169 0000:05:00.0 eth0: link up
[   26.885050] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
toni@toni-System-Product-Name-System-Product-Name:~$

Hoffentlich lässt sich da rauslesen, was noch rein muss!

Schönen Abend, beffatore

hakunamatata Team-Icon

Supporter
Avatar von hakunamatata

Anmeldungsdatum:
30. Juni 2009

Beiträge: 5130
Zitieren
17. März 2014 20:46 (zuletzt bearbeitet: 17. März 2014 20:53)

Kannst du noch die Treiber neu laden. 

sudo modprobe -rfv cx8802
sudo modprobe -rfv cx8800
sudo modprobe -v cx8800
sudo modprobe -v cx8802

Die Fehlermeldung von vorhin sollte eigentlich nicht mehr erscheinen.

edit: Ein Problem habe ich doch schon entdeckt:

[   19.212087] v4l2_common: module verification failed: signature and/or required key missing - tainting kernel
[   19.212109] v4l2_common: Unknown symbol v4l2_subdev_init (err 0)
[   19.212114] v4l2_common: Unknown symbol v4l2_device_register_subdev (err 0)
[   19.212121] v4l2_common: Unknown symbol v4l2_ctrl_get_menu (err 0)
[   19.212124] v4l2_common: Unknown symbol v4l2_ctrl_fill (err 0)
[   19.212186] v4l2_common: Unknown symbol v4l2_subdev_init (err 0)
[   19.212192] v4l2_common: Unknown symbol v4l2_device_register_subdev (err 0)
[   19.212202] v4l2_common: Unknown symbol v4l2_ctrl_get_menu (err 0)
[   19.212207] v4l2_common: Unknown symbol v4l2_ctrl_fill (err 0)

beffatore

(Themenstarter)

Anmeldungsdatum:
21. Februar 2014

Beiträge: 41
Zitieren
17. März 2014 21:19

Auf die beiden ersten Befehle passiert eigentlich nichts, bei 3 und 4 gibt's dann eine Fehlermeldung: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11

toni@toni-System-Product-Name-System-Product-Name:~$ sudo modprobe -rfv cx8802
[sudo] password for toni: 
toni@toni-System-Product-Name-System-Product-Name:~$ sudo modprobe -rfv cx8800
toni@toni-System-Product-Name-System-Product-Name:~$ sudo modprobe -v cx8800
insmod /lib/modules/3.11.0-18-generic/kernel/drivers/media/v4l2-core/v4l2-common.ko 
ERROR: could not insert 'cx8800': Unknown symbol in module, or unknown parameter (see dmesg)
toni@toni-System-Product-Name-System-Product-Name:~$ sudo modprobe -v cx8802
insmod /lib/modules/3.11.0-18-generic/kernel/drivers/media/v4l2-core/v4l2-common.ko 
ERROR: could not insert 'cx8802': Unknown symbol in module, or unknown parameter (see dmesg)
toni@toni-System-Product-Name-System-Product-Name:~$

hakunamatata Team-Icon

Supporter
Avatar von hakunamatata

Anmeldungsdatum:
30. Juni 2009

Beiträge: 5130
Zitieren
17. März 2014 21:46

Super, das hilft:

ERROR: could not insert 'cx8800': Unknown symbol in module, or unknown parameter (see dmesg)
ERROR: could not insert 'cx8802': Unknown symbol in module, or unknown parameter (see dmesg)

Bitte noch gleich danach ein: 

dmesg

Dort sind die Details sichtbar.
Antworten |