ubuntuusers.de

Zeige mal

aplay -l

hdajacksensetest -as ist tatsächlich hdajacksensetest -asc 0. KartenNr. beachten.

Hier sind die Pins von Mint:

Dez 19 13:56:47 helmut-X555LJ kernel: snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3236: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
Dez 19 13:56:47 helmut-X555LJ kernel: snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
Dez 19 13:56:47 helmut-X555LJ kernel: snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
Dez 19 13:56:47 helmut-X555LJ kernel: snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
Dez 19 13:56:47 helmut-X555LJ kernel: snd_hda_codec_realtek hdaudioC0D0:    inputs:
Dez 19 13:56:47 helmut-X555LJ kernel: snd_hda_codec_realtek hdaudioC0D0:      Mic=0x1b

Hier von U.24.04:

Pin 0x12 (Not connected): present = No
Pin 0x14 (Internal Speaker): present = No
Pin 0x17 (Not connected): present = No
Pin 0x18 (Not connected): present = No
Pin 0x19 (Not connected): present = No
Pin 0x1a (Not connected): present = No
Pin 0x1b (Internal Mic): present = No
Pin 0x1d (Not connected): present = No
Pin 0x1e (Not connected): present = No
Pin 0x21 (Black Headphone, Right side): present = No

Also 0x21 für Headphone ist i.O.

Zeige dennoch falls Mint noch läuft

hdajacksensetest -as

helmut@helmut-X555LJ:~$ aplay -l
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: PCH [HDA Intel PCH], Gerät 0: ALC3236 Analog [ALC3236 Analog]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 2: HDMI [HDA Intel HDMI], Gerät 3: HDMI 0 [HDMI 0]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 2: HDMI [HDA Intel HDMI], Gerät 7: HDMI 1 [HDMI 1]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 2: HDMI [HDA Intel HDMI], Gerät 8: HDMI 2 [HDMI 2]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0

Karte 0 ist die Analoge, also in Mint

hdajacksensetest -as

ist das Selbe wie

hdajacksensetest -asc 0

Der Vergleich mit U.24.04 was

cat /proc/asound/card*/codec\#0

berifft sollte was Erhellendes bringen.

Mint lief über einen Stick Läuft jetzt nicht mehr

helmut@helmut-X555LJ:~$ sudo hdajacksensetest -as
[sudo] Passwort für helmut: 
Pin 0x12 (Not connected): present = No
Pin 0x14 (Internal Speaker): present = No
Pin 0x17 (Not connected): present = No
Pin 0x18 (Not connected): present = No
Pin 0x19 (Not connected): present = No
Pin 0x1a (Not connected): present = No
Pin 0x1b (Internal Mic): present = No
Pin 0x1d (Not connected): present = No
Pin 0x1e (Not connected): present = No
Pin 0x21 (Black Headphone, Right side): present = Yes

present = Yes

Genau.(ist doch noch von Mint, oder?)

Bin erstmal weg.

Vergleich mit U.24.04 was 0x21 betrifft könnte helfen bei:

cat /proc/asound/card*/codec\#0

Bei mir ist es sehr dunkel muss jetzt für heute Schluß machen

helmut@helmut-X555LJ:~$ cat /proc/asound/card*/codec\#0
Codec: Realtek ALC3236
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0233
Subsystem Id: 0x104319ad
Revision Id: 0x100003
No Modem Function Group found
Default PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
  Power states:  D0 D1 D2 D3 CLKSTOP EPSS
  Power: setting=D0, actual=D0
GPIO: io=3, o=0, i=0, unsolicited=1, wake=0
  IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Control: name="Speaker Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
  Amp-Out vals:  [0x49 0x49]
  Converter: stream=5, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Control: name="Headphone Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Device: name="ALC3236 Analog", type="Audio", device=0
  Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
  Amp-Out vals:  [0x00 0x00]
  Converter: stream=5, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital
  Converter: stream=0, channel=0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Control: name="Capture Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Capture Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Device: name="ALC3236 Analog", type="Audio", device=0
  Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
  Amp-In vals:  [0x3f 0x3f]
  Converter: stream=1, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x23
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
  Amp-In vals:  [0x97 0x97]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Control: name="Mic Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=3, ofs=0
  Control: name="Mic Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=3, ofs=0
  Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x9c 0x9c] [0x80 0x80]
  Connection: 5
     0x18 0x19 0x1a 0x1b 0x1d
Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80]
  Connection: 2
     0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80]
  Connection: 2
     0x03 0x0b
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00]
  Connection: 1
     0x0d
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
  Amp-In vals:  [0x97 0x97]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x12
Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00000020: IN
  Pin Default 0x40000000: [N/A] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
  Pin-ctls: 0x00:
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Control: name="Speaker Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x00010014: OUT EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x90170110: [Fixed] Speaker at Int N/A
    Conn = Analog, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x0c
Node 0x15 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x16 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x17 [Pin Complex] wcaps 0x40050c: Mono Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80]
  Pincap 0x00000010: OUT
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x0f
Node 0x18 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00003724: IN Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00003724: IN Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1a [Pin Complex] wcaps 0x40048b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00003724: IN Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
  Control: name="Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
  Amp-In vals:  [0x01 0x01]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0001373c: IN OUT HP EAPD Detect
    Vref caps: HIZ 50 GRD 80 100
  EAPD 0x2: EAPD
  Pin Default 0x90a70130: [Fixed] Mic at Int N/A
    Conn = Analog, Color = Unknown
    DefAssociation = 0x3, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
     0x0c* 0x0d
Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1d [Pin Complex] wcaps 0x400400: Mono
  Pincap 0x00000020: IN
  Pin Default 0x40469b05: [N/A] SPDIF Out at Ext N/A
    Conn = Digital, Color = Pink
    DefAssociation = 0x0, Sequence = 0x5
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital
  Pincap 0x00000014: OUT Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
  Processing caps: benign=0, ncoeff=73
Node 0x21 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Control: name="Headphone Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0001001c: OUT HP EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x04211020: [Jack] HP Out at Ext Right
    Conn = 1/8, Color = Black
    DefAssociation = 0x2, Sequence = 0x0
  Pin-ctls: 0xc0: OUT HP
  Unsolicited: tag=01, enabled=1
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
     0x0c 0x0d*
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 6
     0x18 0x19 0x1a 0x1b 0x1d 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80]
  Connection: 6
     0x18 0x19 0x1a 0x1b 0x1d 0x0b
Codec: Intel Broadwell HDMI
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862808
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
  Power states:  D0 D3 CLKSTOP EPSS
  Power: setting=D0, actual=D0, Clock-stop-OK
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
  Converter: stream=0, channel=0
  Digital: Enabled KAE
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0x1e]: 16 20 24 32
    formats [0x5]: PCM AC3
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
  Converter: stream=0, channel=0
  Digital: Enabled KAE
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0x1e]: 16 20 24 32
    formats [0x5]: PCM AC3
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital
  Converter: stream=0, channel=0
  Digital: Enabled KAE
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0x1e]: 16 20 24 32
    formats [0x5]: PCM AC3
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0b000094: OUT Detect HBR HDMI DP
  Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Devices: 0
  Connection: 0
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0b000094: OUT Detect HBR HDMI DP
  Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Devices: 0
  Connection: 0
Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0b000094: OUT Detect HBR HDMI DP
  Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Devices: 0
  Connection: 0
Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono

Pin 0x21 (Black Headphone, Right side): present = Yes

Komisch, ist doch nicht Mint, wieso geht das jetzt? Blicke nicht mehr durch was wann und ob Mint betrifft. Auf Deutsch: Ich gepennt. Selbst den Link von @schwarzheit zu spät mitbekommen.

helmut@helmut-X555LJ:~$

@waltermeister

Du hast "model=headset-mode" gesetzt, oder wieso geht Das jetzt? 🙄

Bei mir ist es sehr dunkel

Du machst Witze, oder bist Du da, wo es viel kalt oder viel Zeitzonen russisch ist? Quasi im russischen Niederkrüchten. 😬

@Marantkurz Das bei mir ist dunkel sollte andeuten das mir der Kopf zuläuft.

Um es gerade zu rücken

PC ausgeschaltet über USB Stick Linux Mint22 gestartet Funktion der Kopfhörerbuchse okay Firefox gestartet Versuch sich hier einzuloggen gescheitert hab das " @ " nicht eingeben können PC aus/eingeschaltet Ubuntu24.04 läuft mit dem Problem

Aktuell Kopfhörer eingesteckt Sound über Lautsprecher

helmut@helmut-X555LJ:~$ sudo hdajacksensetest -as
[sudo] Passwort für helmut: 
Pin 0x12 (Not connected): present = No
Pin 0x14 (Internal Speaker): present = No
Pin 0x17 (Not connected): present = No
Pin 0x18 (Not connected): present = No
Pin 0x19 (Not connected): present = No
Pin 0x1a (Not connected): present = No
Pin 0x1b (Internal Mic): present = No
Pin 0x1d (Not connected): present = No
Pin 0x1e (Not connected): present = No
Pin 0x21 (Black Headphone, Right side): present = Yes

Kopfhörer ausgesteckt Sound über Lautsprecher der Pin 0x21 (Black Headphone, Right side): present = No

helmut@helmut-X555LJ:~$ sudo hdajacksensetest -as
[sudo] Passwort für helmut: 
Pin 0x12 (Not connected): present = No
Pin 0x14 (Internal Speaker): present = No
Pin 0x17 (Not connected): present = No
Pin 0x18 (Not connected): present = No
Pin 0x19 (Not connected): present = No
Pin 0x1a (Not connected): present = No
Pin 0x1b (Internal Mic): present = No
Pin 0x1d (Not connected): present = No
Pin 0x1e (Not connected): present = No
Pin 0x21 (Black Headphone, Right side): present = No

Das bei mir ist dunkel sollte andeuten das mir der Kopf zuläuft.

Ja, meine Bermerkung sollte ausschließlich ironisch sein. Wir können auch 1,2 Tage Pause machen. Ernstgemeint, Soundkram ist halt komplex, man lernt eben dazu. Nicht zuletzt ging es mir Gestern ähnlich mit der Konzentration.

Versuch sich hier einzuloggen gescheitert hab das " @ " nicht eingeben können

Notfalls aus Netz oder bei UU kopieren. Oben Filter/Neue Beiträge/Dein Eigener.

Oder mglw. Shift+2. Das geht auch, scaltet auf DE um:

setxkbmap de

Für mich heisst es, dass alle Ausgaben von Gestern aus U.24.04. sind.

–

Warte erst mal ab.

@Marantkurz Heutige Ausgabe ich weiß nicht warum Pin 0x21 (Black Headphone, Right side): present = No

helmut@helmut-X555LJ:~$ sudo hdajacksensetest -as
Pin 0x12 (Not connected): present = No
Pin 0x14 (Internal Speaker): present = No
Pin 0x17 (Not connected): present = No
Pin 0x18 (Not connected): present = No
Pin 0x19 (Not connected): present = No
Pin 0x1a (Not connected): present = No
Pin 0x1b (Internal Mic): present = No
Pin 0x1d (Not connected): present = No
Pin 0x1e (Not connected): present = No
Pin 0x21 (Black Headphone, Right side): present = No

helmut@helmut-X555LJ:~$ sudo hdajacksensetest -asc 1
No pins found for card 1 codec 0, did you pick the right one?

helmut@helmut-X555LJ:~$ sudo hdajacksensetest -asc 2
Pin 0x05 ( Digital Out, HDMI): present = No
Pin 0x06 ( Digital Out, HDMI): present = No
Pin 0x07 ( Digital Out, HDMI): present = No
helmut@helmut-X555LJ:~$ sudo hdajacksensetest -asc 3
No pins found for card 3 codec 0, did you pick the right one?

Hab dann eingegeben

helmut@helmut-X555LJ:~$ aplay -l
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: PCH [HDA Intel PCH], Gerät 0: ALC3236 Analog [ALC3236 Analog]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 2: HDMI [HDA Intel HDMI], Gerät 3: HDMI 0 [HDMI 0]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 2: HDMI [HDA Intel HDMI], Gerät 7: HDMI 1 [HDMI 1]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 2: HDMI [HDA Intel HDMI], Gerät 8: HDMI 2 [HDMI 2]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0

um zu prüfen welche Karte da ist

Nochmal 5min später

 
helmut@helmut-X555LJ:~$ sudo hdajacksensetest -asc 0
[sudo] Passwort für helmut: 
Pin 0x12 (Not connected): present = No
Pin 0x14 (Internal Speaker): present = No
Pin 0x17 (Not connected): present = No
Pin 0x18 (Not connected): present = No
Pin 0x19 (Not connected): present = No
Pin 0x1a (Not connected): present = No
Pin 0x1b (Internal Mic): present = No
Pin 0x1d (Not connected): present = No
Pin 0x1e (Not connected): present = No
Pin 0x21 (Black Headphone, Right side): present = Yes

ich werd Verrückt !!!

jetzt Ausgabe

helmut@helmut-X555LJ:~$ pactl list cards
Karte #46
	Name: alsa_card.pci-0000_00_03.0
	Treiber: alsa
	Owner-Modul: k. A.
	Eigenschaften:
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "2"
		api.alsa.card.longname = "HDA Intel HDMI at 0x9b31c000 irq 56"
		api.alsa.card.name = "HDA Intel HDMI"
		api.alsa.path = "hw:2"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio2"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:00:03.0"
		device.description = "Built-in Audio"
		device.enum.api = "udev"
		device.form_factor = "internal"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_00_03.0"
		device.nick = "HDA Intel HDMI"
		device.plugged.usec = "9579088"
		device.product.id = "0x160c"
		device.product.name = "Broadwell-U Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card2"
		device.vendor.id = "0x8086"
		device.vendor.name = "Intel Corporation"
		media.class = "Audio/Device"
		factory.id = "14"
		client.id = "35"
		object.id = "46"
		object.serial = "46"
		object.path = "alsa:pcm:2"
		alsa.card = "2"
		alsa.card_name = "HDA Intel HDMI"
		alsa.long_card_name = "HDA Intel HDMI at 0x9b31c000 irq 56"
		alsa.driver_name = "snd_hda_intel"
		alsa.mixer_name = "Intel Broadwell HDMI"
		alsa.components = "HDA:80862808,80860101,00100000"
		alsa.id = "HDMI"
		device.string = "2"
	Profile:
		off: Off (Ziele: 0, Quellen: 0, Priorität: 0, verfügbar: ja)
		output:hdmi-stereo: Digital Stereo (HDMI) Output (Ziele: 1, Quellen: 0, Priorität: 5900, verfügbar: nein)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (Ziele: 1, Quellen: 0, Priorität: 5700, verfügbar: nein)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (Ziele: 1, Quellen: 0, Priorität: 5700, verfügbar: nein)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (Ziele: 1, Quellen: 0, Priorität: 800, verfügbar: nein)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (Ziele: 1, Quellen: 0, Priorität: 800, verfügbar: nein)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (Ziele: 1, Quellen: 0, Priorität: 600, verfügbar: nein)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (Ziele: 1, Quellen: 0, Priorität: 600, verfügbar: nein)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (Ziele: 1, Quellen: 0, Priorität: 600, verfügbar: nein)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (Ziele: 1, Quellen: 0, Priorität: 600, verfügbar: nein)
		pro-audio: Pro Audio (Ziele: 3, Quellen: 0, Priorität: 1, verfügbar: ja)
	Aktives Profil: pro-audio
	Ports:
		hdmi-output-0: HDMI / DisplayPort (Typ: HDMI, Priorität: 5900, Latenzversatz: 0 usec, Verfügbarkeitsgruppe: Legacy 1, nicht verfügbar)
			Eigenschaften:
				port.type = "hdmi"
				port.availability-group = "Legacy 1"
				device.icon_name = "video-display"
				card.profile.port = "0"
			Teil der/des Profil(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
		hdmi-output-1: HDMI / DisplayPort 2 (Typ: HDMI, Priorität: 5800, Latenzversatz: 0 usec, Verfügbarkeitsgruppe: Legacy 2, nicht verfügbar)
			Eigenschaften:
				port.type = "hdmi"
				port.availability-group = "Legacy 2"
				device.icon_name = "video-display"
				card.profile.port = "1"
			Teil der/des Profil(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
		hdmi-output-2: HDMI / DisplayPort 3 (Typ: HDMI, Priorität: 5700, Latenzversatz: 0 usec, Verfügbarkeitsgruppe: Legacy 3, nicht verfügbar)
			Eigenschaften:
				port.type = "hdmi"
				port.availability-group = "Legacy 3"
				device.icon_name = "video-display"
				card.profile.port = "2"
			Teil der/des Profil(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2

Karte #47
	Name: alsa_card.pci-0000_00_1b.0
	Treiber: alsa
	Owner-Modul: k. A.
	Eigenschaften:
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "0"
		api.alsa.card.longname = "HDA Intel PCH at 0x9b318000 irq 54"
		api.alsa.card.name = "HDA Intel PCH"
		api.alsa.path = "hw:0"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:00:1b.0"
		device.description = "Built-in Audio"
		device.enum.api = "udev"
		device.form_factor = "internal"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_00_1b.0"
		device.nick = "HDA Intel PCH"
		device.plugged.usec = "9259459"
		device.product.id = "0x9ca0"
		device.product.name = "Wildcat Point-LP High Definition Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.vendor.id = "0x8086"
		device.vendor.name = "Intel Corporation"
		media.class = "Audio/Device"
		factory.id = "14"
		client.id = "35"
		object.id = "47"
		object.serial = "47"
		object.path = "alsa:pcm:0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0x9b318000 irq 54"
		alsa.driver_name = "snd_hda_intel"
		alsa.mixer_name = "Realtek ALC3236"
		alsa.components = "HDA:10ec0233,104319ad,00100003"
		alsa.id = "PCH"
		device.string = "0"
	Profile:
		off: Off (Ziele: 0, Quellen: 0, Priorität: 0, verfügbar: ja)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (Ziele: 1, Quellen: 1, Priorität: 6565, verfügbar: ja)
		output:analog-stereo: Analog Stereo Output (Ziele: 1, Quellen: 0, Priorität: 6500, verfügbar: ja)
		input:analog-stereo: Analog Stereo Input (Ziele: 0, Quellen: 1, Priorität: 65, verfügbar: ja)
		pro-audio: Pro Audio (Ziele: 1, Quellen: 1, Priorität: 1, verfügbar: ja)
	Aktives Profil: pro-audio
	Ports:
		analog-input-mic: Microphone (Typ: Mikro, Priorität: 8700, Latenzversatz: 0 usec, Verfügbarkeitsgruppe: Legacy 1, Verfügbarkeit unbekannt)
			Eigenschaften:
				port.type = "mic"
				port.availability-group = "Legacy 1"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "0"
			Teil der/des Profil(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
		analog-output-speaker: Speakers (Typ: Lautsprecher, Priorität: 10000, Latenzversatz: 0 usec, Verfügbarkeitsgruppe: Legacy 2, nicht verfügbar)
			Eigenschaften:
				port.type = "speaker"
				port.availability-group = "Legacy 2"
				device.icon_name = "audio-speakers"
				card.profile.port = "1"
			Teil der/des Profil(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
		analog-output-headphones: Headphones (Typ: Kopfhörer, Priorität: 9900, Latenzversatz: 0 usec, Verfügbarkeitsgruppe: Legacy 3, verfügbar)
			Eigenschaften:
				port.type = "headphones"
				port.availability-group = "Legacy 3"
				device.icon_name = "audio-headphones"
				card.profile.port = "2"
			Teil der/des Profil(s): output:analog-stereo, output:analog-stereo+input:analog-stereo

Wieso Karte 46 47 Bin ich noch richtig ?

Wieso Karte 46 47 Bin ich noch richtig ?

Ja, wichtig ist

api.alsa.card = "0"
api.alsa.path = "hw:0"

Da ist wieder die Karte 0, in dem Fall Karte 47

Dort bei "aktivem Profil" steht:

Aktives Profil: pro-audio

Stelle Das bitte auf "Analog Stereo" bei "pavucontrol -t 5"

Bei "Ports" steht:

analog-output-headphones: Headphones (Typ: Kopfhörer, Priorität: 9900, Latenzversatz: 0 usec, Verfügbarkeitsgruppe: Legacy 3, verfügbar)

Was eigentlich heisst, dass der KH Ausgang aktiv ist, schau mal bei "pavucontrol -t 3" nach, was bei Port bei der analogen Karte steht.

Wieso "Black Headphone present = Yes" Minuten später geht, keine Ahnung. Sowas riecht eigentlich nach Energiezustand der Karte.

–

Was hälst Du davon das U.24.04 per Livestick zu starten und Dir dort mal das Verhalten anzusehen?

edit

"aplay -l" ist Ebene ALSA, darauf aufsitzend der Soundserver(Pipewire oder Pulseaudio), der seine eigene Verwaltung hat.

Allg: Soundbefehle, die beginnen mit "a.." gehören zu ALSA, "pa.., pactl, pw.." etc. gehören zum Soundserver. Wobei pactl ein reiner Pulseaudio Befehl ist, der aber durch pipewire-pulse Pipewire zugänglich gemacht ist.

Der Soundserver, der läuft steht bei

pactl info

"on PipeWire" heisst Pipewire läuft.

Zum Nachlesen:

https://wiki.ubuntuusers.de/Sound/

bin im LiveSystem alles geht

@ Marantkurz

Ausgabe Live U24.4 vom Stick

pactl info 
Server String: /run/user/1000/pulse/native
Library Protocol Version: 35
Server Protocol Version: 35
Is Local: yes
Client Index: 98
Tile Size: 65472
User Name: ubuntu
Host Name: ubuntu
Server Name: PulseAudio (on PipeWire 1.0.5)
Server Version: 15.0.0
Default Sample Specification: float32le 2ch 48000Hz
Default Channel Map: front-left,front-right
Default Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
Default Source: alsa_input.pci-0000_00_1b.0.analog-stereo
Cookie: e4f9:329c

aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC3236 Analog [ALC3236 Analog]
  Subdevices: 0/1
  Subdevice #0: subdevice #0

Terminal nimmt keine Eingaben mehr an Terminal geschlossen Neues Terminal

ubuntu@ubuntu:~$ pactl list cards
Card #44
	Name: alsa_card.pci-0000_00_1b.0
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "0"
		api.alsa.card.longname = "HDA Intel PCH at 0x9b318000 irq 54"
		api.alsa.card.name = "HDA Intel PCH"
		api.alsa.path = "hw:0"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:00:1b.0"
		device.description = "Built-in Audio"
		device.enum.api = "udev"
		device.form_factor = "internal"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_00_1b.0"
		device.nick = "HDA Intel PCH"
		device.plugged.usec = "19790467"
		device.product.id = "0x9ca0"
		device.product.name = "Wildcat Point-LP High Definition Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.vendor.id = "0x8086"
		device.vendor.name = "Intel Corporation"
		media.class = "Audio/Device"
		factory.id = "14"
		client.id = "35"
		object.id = "44"
		object.serial = "44"
		object.path = "alsa:pcm:0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0x9b318000 irq 54"
		alsa.driver_name = "snd_hda_intel"
		alsa.mixer_name = "Realtek ALC3236"
		alsa.components = "HDA:10ec0233,104319ad,00100003"
		alsa.id = "PCH"
		device.string = "0"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: yes)
		output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes)
		input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
		pro-audio: Pro Audio (sinks: 1, sources: 1, priority: 1, available: yes)
	Active Profile: output:analog-stereo+input:analog-stereo
	Ports:
		analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability group: Legacy 1, availability unknown)
			Properties:
				port.type = "mic"
				port.availability-group = "Legacy 1"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "0"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
		analog-output-speaker: Speakers (type: Speaker, priority: 10000, latency offset: 0 usec, availability group: Legacy 2, not available)
			Properties:
				port.type = "speaker"
				port.availability-group = "Legacy 2"
				device.icon_name = "audio-speakers"
				card.profile.port = "1"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
		analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 3, available)
			Properties:
				port.type = "headphones"
				port.availability-group = "Legacy 3"
				device.icon_name = "audio-headphones"
				card.profile.port = "2"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo

Also, bevor Du Neuinstallation machst probiere mal mit älterem Kernel zu starten und testen.

https://wiki.ubuntuusers.de/Kernel/#lteren-Kernel-starten

wie ??? Grub find ich nicht GRUB2 Hauptmenü starten

Zitierter Text

In sehr seltenen Fällen kann es vorkommen, dass nach einer Aktualisierung des Kernels bestimmte Dinge teilweise oder überhaupt nicht mehr funktionieren. Ist beispielsweise das WLAN danach ohne Funktion, kann man im Auswahlmenü des Bootmanagers GRUB 2 einen älteren Kernel starten (zur Handhabung siehe auch die Bilder „GRUB2 Hauptmenü“ und „Untermenü für ältere Kernel“ im Abschnitt Kernel-deinstallieren). Wie im Bild "GRUB2 Hauptmenü" dargestellt, wählt man mit den Pfeiltasten den Eintrag "Erweiterte Optionen für Ubuntu" und es öffnet das Bild „Untermenü für ältere Kernel“. Hier kann anschließend ein älteren Kernel ausgewählt werden. Die Reihenfolge ist in der Regel chronologisch, d.h. der älteste Kernel steht ganz unten in der Liste. Dann bestätigt man mit ⏎ .

oder von USB starten geht es dann zu den erweiterten Einstellungen