ubuntuusers.de

Das gefällt mir alles noch nicht 😐 Zur Zeit kannst du da noch gar nichts einstellen da alsa die Traktor Audio 6 noch nicht vernünftig einrichtet.

Was ergibt die Ausgabe von

envy24control

?

~$ envy24control
No ICE1712 cards found

wenn die USB-Karte nicht eingesteckt ist, kommt auf

~$ alsamixer
Fehler beim Öffen des Mixer-Gerätes: Datei oder Verzeichnis nicht gefunden

Ja weil deine Traktor jetzt die default Karte ist. Wir gehen mal anders vor.

sudo alsactl init

und

sudo /etc/init.d/alsa-utils reset

Das setzt alsa zurück. Dann die

gksudo gedit /etc/asound.conf

mal komplett ändern in

pcm.usb-audio {
          type hw
          card Traktor Audio 6
       }
}
       
ctl.usb-audio {
          type hw
          card Traktor Audio 6
       }
}
pcm.softvol {
          type softvol
          slave {
             pcm "dmix"
          }
          control {
             name "Master"
             card Traktor Audio 6
          }
}
       
pcm.!default {
         type plug
         slave.pcm "softvol"
       }
}

Danach bitte neu Starten und dann bitte folgende Angaben zeigen

lsmod | grep 'snd'
ls -l /dev/snd/

Bis gleich 😉

~$ lsmod | grep 'snd'
snd_hda_codec_hdmi     45056  1
snd_hda_codec_realtek    86016  1
snd_soc_skl            57344  0
snd_hda_codec_generic    73728  1 snd_hda_codec_realtek
snd_soc_skl_ipc        32768  1 snd_soc_skl
snd_soc_sst_ipc        16384  1 snd_soc_skl_ipc
snd_soc_sst_dsp        53248  1 snd_soc_skl_ipc
snd_hda_ext_core       28672  1 snd_soc_skl
snd_soc_sst_match      16384  1 snd_soc_skl
snd_soc_core          229376  1 snd_soc_skl
snd_compress           20480  1 snd_soc_core
ac97_bus               16384  1 snd_soc_core
snd_usb_audio         176128  0
snd_pcm_dmaengine      16384  1 snd_soc_core
dw_dmac_core           24576  1 snd_soc_sst_dsp
snd_hda_intel          36864  0
snd_hda_codec         135168  4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
snd_usbmidi_lib        32768  1 snd_usb_audio
snd_hda_core           81920  7 snd_hda_codec_realtek,snd_hda_ext_core,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_soc_skl
snd_seq_midi           16384  0
snd_hwdep              16384  2 snd_usb_audio,snd_hda_codec
snd_seq_midi_event     16384  1 snd_seq_midi
snd_pcm               110592  9 snd_hda_ext_core,snd_usb_audio,snd_soc_core,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_soc_skl,snd_pcm_dmaengine,snd_hda_core
snd_rawmidi            32768  2 snd_usbmidi_lib,snd_seq_midi
snd_seq                69632  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              32768  2 snd_pcm,snd_seq
snd                    81920  15 snd_hda_codec_realtek,snd_usb_audio,snd_soc_core,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_compress
soundcore              16384  1 snd

und

~$ ls -l /dev/snd/
insgesamt 0
drwxr-xr-x  2 root root       60 Jan 16 18:48 by-path
crw-rw----+ 1 root audio 116,  2 Jan 16 18:48 controlC0
crw-rw----+ 1 root audio 116,  8 Jan 16 18:48 hwC0D0
crw-rw----+ 1 root audio 116,  9 Jan 16 18:48 hwC0D2
crw-rw----+ 1 root audio 116,  4 Jan 16 18:48 pcmC0D0c
crw-rw----+ 1 root audio 116,  3 Jan 16 18:48 pcmC0D0p
crw-rw----+ 1 root audio 116,  5 Jan 16 18:48 pcmC0D3p
crw-rw----+ 1 root audio 116,  6 Jan 16 18:48 pcmC0D7p
crw-rw----+ 1 root audio 116,  7 Jan 16 18:48 pcmC0D8p
crw-rw----+ 1 root audio 116,  1 Jan 16 18:48 seq
crw-rw----+ 1 root audio 116, 33 Jan 16 18:48 timer

Sie ist immer noch nicht richtig geladen 😐

crw-rw----+ 1 root audio 116,  2 Jan 16 18:48 controlC0
crw-rw----+ 1 root audio 116,  8 Jan 16 18:48 hwC0D0
crw-rw----+ 1 root audio 116,  9 Jan 16 18:48 hwC0D2

Zeige

lspci -v | grep -A7 -i "audio"

und

sudo apt -s install libasound2-plugins

Als Hinweiß -Ich habe diese Karte nicht und deshalb kann es noch dauern 😬

~$ lspci -v | grep -A7 -i "audio"
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21) (prog-if 80)
	Subsystem: Dell Sunrise Point-LP HD Audio
	Flags: bus master, fast devsel, latency 32, IRQ 283
	Memory at dc728000 (64-bit, non-prefetchable) [size=16K]
	Memory at dc700000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel, snd_soc_skl

Kein Thema, vielen Dank für deine Hilfe schonmal!

Das zeigt deine Ausgabe jetzt auch, Sie Taucht gar nicht auf. Hast du sie beim Start schon angeklemmt oder steckst du sie an wenn der Pc

Hochgefahren ist?

also dieses mal war sie schon drin beim hochfahren.

Ok.Gebe mir noch die Ausgaben von

sudo apt -s install libasound2-plugins

sowie

sudo modprobe -rfv snd-usb-audio

und

sudo modprobe -v snd-usb-audio

mit eingesteckter Karte.Danach nochmal

lspci -v | grep -A7 -i "audio"

~$ sudo apt -s install libasound2-plugins
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.       
Statusinformationen werden eingelesen.... Fertig
»libasound2-plugins« ist bereits die neuste Version (1.1.0-0ubuntu1).
libasound2-plugins wurde als manuell installiert festgelegt.
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.

und

~$ sudo modprobe -rfv snd-usb-audio
rmmod snd_usb_audio
rmmod snd_usbmidi_lib

und

~$ sudo modprobe -v snd-usb-audio
insmod /lib/modules/4.6.7-040607-generic/kernel/sound/usb/snd-usbmidi-lib.ko 
insmod /lib/modules/4.6.7-040607-generic/kernel/sound/usb/snd-usb-audio.ko index=-2 index=-2 index=0 

und

~$ lspci -v | grep -A7 -i "audio"
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21) (prog-if 80)
	Subsystem: Dell Sunrise Point-LP HD Audio
	Flags: bus master, fast devsel, latency 32, IRQ 283
	Memory at dc728000 (64-bit, non-prefetchable) [size=16K]
	Memory at dc700000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel, snd_soc_skl

Da sind etwas viele

snd-usb-audio.ko index=-2 index=-2 index=0

Sehe mal in deiner

gksudo gedit /etc/modprobe.d/alsa-base.conf

nach und kommentiere alles aus mit 2 & 0 options snd-usb-audio index=-2

#options snd-usb-audio index=-2

Dann bitte nochmal zeigen

~$ sudo modprobe -v snd-usb-audio
insmod /lib/modules/4.6.7-040607-generic/kernel/sound/usb/snd-usbmidi-lib.ko 
insmod /lib/modules/4.6.7-040607-generic/kernel/sound/usb/snd-usb-audio.ko index=-2 

Besser.Jetzt ein Terminal aufmachen und auf lassen

tail -f /var/log/syslog

Ein zweites Terminal aufmachen und folgendes eingeben

sudo modprobe -r snd-usb-audio

und danach

sudo modprobe -v snd-usb-audio

dann

dmesg

eingeben und die Letzten ca. 30 Zeilen zeigen sowie die Ausgabe vom Terminal 1 (tail -f /var/log/syslog)

dmesg:

[    9.173222] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    9.173223] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    9.173225] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    9.173227] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[    9.173229] snd_hda_codec_realtek hdaudioC0D0:      Headphone Mic=0x1a
[    9.173230] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    9.179541] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    9.200051] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    9.200093] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    9.200126] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    9.200163] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    9.207754] intel_rapl: Found RAPL domain package
[    9.207757] intel_rapl: Found RAPL domain core
[    9.207759] intel_rapl: Found RAPL domain uncore
[    9.207761] intel_rapl: Found RAPL domain dram
[    9.246695] brcmfmac 0000:3a:00.0: Direct firmware load for brcm/brcmfmac4350-pcie.txt failed with error -2
[    9.502577] dell_wmi: Detected Dell WMI interface version 1
[    9.502635] input: Dell WMI hotkeys as /devices/virtual/input/input17
[    9.588027] audit: type=1400 audit(1484588922.466:2): apparmor="STATUS" operation="profile_load" name="system_tor" pid=808 comm="apparmor_parser"
[    9.589551] audit: type=1400 audit(1484588922.470:3): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=807 comm="apparmor_parser"
[    9.589557] audit: type=1400 audit(1484588922.470:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=807 comm="apparmor_parser"
[    9.589560] audit: type=1400 audit(1484588922.470:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=807 comm="apparmor_parser"
[    9.589564] audit: type=1400 audit(1484588922.470:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=807 comm="apparmor_parser"
[    9.590552] audit: type=1400 audit(1484588922.470:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/snapd/snap-confine" pid=811 comm="apparmor_parser"
[    9.590557] audit: type=1400 audit(1484588922.470:8): apparmor="STATUS" operation="profile_load" name="mount-namespace-capture-helper" pid=811 comm="apparmor_parser"
[    9.591529] audit: type=1400 audit(1484588922.470:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=806 comm="apparmor_parser"
[    9.591534] audit: type=1400 audit(1484588922.470:10): apparmor="STATUS" operation="profile_load" name="chromium" pid=806 comm="apparmor_parser"
[    9.594709] audit: type=1400 audit(1484588922.474:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=816 comm="apparmor_parser"
[    9.645796] Adding 16640508k swap on /dev/mapper/cryptswap1.  Priority:-1 extents:1 across:16640508k SSFS
[    9.661326] brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 22 2015 06:16:26 version 7.35.180.119 (r594535) FWID 01-e791c176
[    9.688231] ACPI: Invalid package element [0]: got number, expecting [R]
[    9.688245] _ART package 0 is invalid, ignored
[    9.688262] ACPI: Invalid package element [0]: got number, expecting [R]
[    9.688263] _ART package 0 is invalid, ignored
[    9.693972] brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30)
[    9.698359] brcmfmac 0000:3a:00.0 wlp58s0: renamed from wlan0
[    9.770806] input: DLL0704:01 06CB:76AE Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-DLL0704:01/0018:06CB:76AE.0003/input/input18
[    9.771050] hid-multitouch 0018:06CB:76AE.0003: input,hidraw2: I2C HID v1.00 Mouse [DLL0704:01 06CB:76AE] on i2c-DLL0704:01
[    9.832878] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[    9.872630] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[    9.989346] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[   10.095655] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.095658] Bluetooth: BNEP filters: protocol multicast
[   10.095661] Bluetooth: BNEP socket layer initialized
[   17.056532] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready
[  108.881075] usb 1-2: USB disconnect, device number 3
[  112.669398] usb 1-2: new high-speed USB device number 7 using xhci_hcd
[  112.853825] usb 1-2: New USB device found, idVendor=17cc, idProduct=1010
[  112.853836] usb 1-2: New USB device strings: Mfr=12, Product=7, SerialNumber=13
[  112.853841] usb 1-2: Product: Traktor Audio 6
[  112.853845] usb 1-2: Manufacturer: Native Instruments
[  112.853849] usb 1-2: SerialNumber: 21B6131A
[  113.021670] usb 1-2: reset high-speed USB device number 7 using xhci_hcd
[  113.205628] usb 1-2: device firmware changed
[  113.205714] snd-usb-audio: probe of 1-2:1.0 failed with error -11
[  113.207635] usb 1-2: USB disconnect, device number 7
[  113.377561] usb 1-2: new high-speed USB device number 8 using xhci_hcd
[  113.561971] usb 1-2: New USB device found, idVendor=17cc, idProduct=1011
[  113.561982] usb 1-2: New USB device strings: Mfr=12, Product=7, SerialNumber=13
[  113.561987] usb 1-2: Product: Traktor Audio 6
[  113.561992] usb 1-2: Manufacturer: Native Instruments
[  113.561996] usb 1-2: SerialNumber: 21B6131A
[  113.562727] snd-usb-audio 1-2:1.0: cannot find the slot for index 0 (range 0-0), error: -16
[  113.562736] usb 1-2: cannot create card instance 0
[  113.562748] snd-usb-audio: probe of 1-2:1.0 failed with error -16
[ 2324.659074] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 2324.666092] JFS: nTxBlock = 8192, nTxLock = 65536
[ 2324.674951] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 2324.689399] QNX4 filesystem 0.2.3 registered.
[ 2324.762326] raid6: sse2x1   gen()  8560 MB/s
[ 2324.830319] raid6: sse2x1   xor()  5771 MB/s
[ 2324.898317] raid6: sse2x2   gen() 10815 MB/s
[ 2324.966306] raid6: sse2x2   xor()  7493 MB/s
[ 2325.034308] raid6: sse2x4   gen() 12503 MB/s
[ 2325.102298] raid6: sse2x4   xor()  8429 MB/s
[ 2325.170296] raid6: avx2x1   gen() 21582 MB/s
[ 2325.238291] raid6: avx2x2   gen() 24351 MB/s
[ 2325.306285] raid6: avx2x4   gen() 27230 MB/s
[ 2325.306286] raid6: using algorithm avx2x4 gen() 27230 MB/s
[ 2325.306287] raid6: using avx2x2 recovery algorithm
[ 2325.307603] xor: automatically using best checksumming function:
[ 2325.346307]    avx       : 26440.000 MB/sec
[ 2325.359344] Btrfs loaded
[ 2325.440232] EXT4-fs (nvme0n1p2): VFS: Can't find ext4 filesystem
[ 2325.441261] EXT4-fs (nvme0n1p2): VFS: Can't find ext4 filesystem
[ 2325.442343] EXT4-fs (nvme0n1p2): VFS: Can't find ext4 filesystem
[ 2325.443402] FAT-fs (nvme0n1p2): bogus number of reserved sectors
[ 2325.443405] FAT-fs (nvme0n1p2): Can't find a valid FAT filesystem
[ 2325.448712] XFS (nvme0n1p2): Invalid superblock magic number
[ 2325.453538] FAT-fs (nvme0n1p2): bogus number of reserved sectors
[ 2325.453541] FAT-fs (nvme0n1p2): Can't find a valid FAT filesystem
[ 2325.456719] VFS: Can't find a Minix filesystem V1 | V2 | V3 on device nvme0n1p2.
[ 2325.459676] hfsplus: unable to find HFS+ superblock
[ 2325.460967] qnx4: no qnx4 filesystem (no root dir).
[ 2325.461852] ufs: You didn't specify the type of your ufs filesystem
               
               mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...
               
               >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
[ 2325.462005] ufs: ufs_fill_super(): bad magic number
[ 2325.464306] hfs: can't find a HFS filesystem on dev nvme0n1p2
[ 2332.366785] EXT4-fs (nvme0n1p2): VFS: Can't find ext4 filesystem
[ 2332.367741] EXT4-fs (nvme0n1p2): VFS: Can't find ext4 filesystem
[ 2332.368764] EXT4-fs (nvme0n1p2): VFS: Can't find ext4 filesystem
[ 2332.369825] FAT-fs (nvme0n1p2): bogus number of reserved sectors
[ 2332.369828] FAT-fs (nvme0n1p2): Can't find a valid FAT filesystem
[ 2332.373551] XFS (nvme0n1p2): Invalid superblock magic number
[ 2332.378407] FAT-fs (nvme0n1p2): bogus number of reserved sectors
[ 2332.378410] FAT-fs (nvme0n1p2): Can't find a valid FAT filesystem
[ 2332.381207] VFS: Can't find a Minix filesystem V1 | V2 | V3 on device nvme0n1p2.
[ 2332.382200] hfsplus: unable to find HFS+ superblock
[ 2332.383083] qnx4: no qnx4 filesystem (no root dir).
[ 2332.383908] ufs: You didn't specify the type of your ufs filesystem
               
               mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...
               
               >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
[ 2332.384061] ufs: ufs_fill_super(): bad magic number
[ 2332.385869] hfs: can't find a HFS filesystem on dev nvme0n1p2
[ 2334.753487] EXT4-fs (nvme0n1p2): VFS: Can't find ext4 filesystem
[ 2334.754511] EXT4-fs (nvme0n1p2): VFS: Can't find ext4 filesystem
[ 2334.755550] EXT4-fs (nvme0n1p2): VFS: Can't find ext4 filesystem
[ 2334.756542] FAT-fs (nvme0n1p2): bogus number of reserved sectors
[ 2334.756544] FAT-fs (nvme0n1p2): Can't find a valid FAT filesystem
[ 2334.760009] XFS (nvme0n1p2): Invalid superblock magic number
[ 2334.764548] FAT-fs (nvme0n1p2): bogus number of reserved sectors
[ 2334.764552] FAT-fs (nvme0n1p2): Can't find a valid FAT filesystem
[ 2334.767339] VFS: Can't find a Minix filesystem V1 | V2 | V3 on device nvme0n1p2.
[ 2334.768301] hfsplus: unable to find HFS+ superblock
[ 2334.769173] qnx4: no qnx4 filesystem (no root dir).
[ 2334.770064] ufs: You didn't specify the type of your ufs filesystem
               
               mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...
               
               >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
[ 2334.770217] ufs: ufs_fill_super(): bad magic number
[ 2334.772077] hfs: can't find a HFS filesystem on dev nvme0n1p2
[ 2370.673098] usbcore: deregistering interface driver snd-usb-audio
[ 2391.690321] snd-usb-audio 1-2:1.0: cannot find the slot for index 0 (range 0-0), error: -16
[ 2391.690325] usb 1-2: cannot create card instance 0
[ 2391.690328] snd-usb-audio: probe of 1-2:1.0 failed with error -16
[ 2391.690347] usbcore: registered new interface driver snd-usb-audio
[ 3223.714276] usbcore: deregistering interface driver snd-usb-audio
[ 3230.563235] snd-usb-audio 1-2:1.0: cannot find the slot for index 0 (range 0-0), error: -16
[ 3230.563244] usb 1-2: cannot create card instance 0
[ 3230.563257] snd-usb-audio: probe of 1-2:1.0 failed with error -16
[ 3230.563307] usbcore: registered new interface driver snd-usb-audio
[ 3323.303219] usbcore: deregistering interface driver snd-usb-audio
[ 3325.937347] usbcore: registered new interface driver snd-usb-audio
[ 3336.760607] usb 1-2: USB disconnect, device number 8
[ 3340.491281] usb 1-2: new high-speed USB device number 9 using xhci_hcd
[ 3340.675825] usb 1-2: New USB device found, idVendor=17cc, idProduct=1010
[ 3340.675828] usb 1-2: New USB device strings: Mfr=12, Product=7, SerialNumber=13
[ 3340.675830] usb 1-2: Product: Traktor Audio 6
[ 3340.675832] usb 1-2: Manufacturer: Native Instruments
[ 3340.675833] usb 1-2: SerialNumber: 21B6131A
[ 3340.843683] usb 1-2: reset high-speed USB device number 9 using xhci_hcd
[ 3341.027346] usb 1-2: device firmware changed
[ 3341.027395] snd-usb-audio: probe of 1-2:1.0 failed with error -11
[ 3341.027851] usb 1-2: USB disconnect, device number 9
[ 3341.195291] usb 1-2: new high-speed USB device number 10 using xhci_hcd
[ 3341.379936] usb 1-2: New USB device found, idVendor=17cc, idProduct=1011
[ 3341.379944] usb 1-2: New USB device strings: Mfr=12, Product=7, SerialNumber=13
[ 3341.379948] usb 1-2: Product: Traktor Audio 6
[ 3341.379952] usb 1-2: Manufacturer: Native Instruments
[ 3341.379955] usb 1-2: SerialNumber: 21B6131A
[ 3892.632419] usbcore: deregistering interface driver snd-usb-audio
[ 3929.704111] usbcore: registered new interface driver snd-usb-audio

~$ tail -f /var/log/syslog
Jan 16 19:52:41 asdf711 chromium-browser.desktop[1932]: ALSA lib conf.c:3371:(snd_config_hooks_call) function snd_config_hook_load returned error: Das Argument ist ungültig
Jan 16 19:52:41 asdf711 chromium-browser.desktop[1932]: ALSA lib conf.c:3820:(snd_config_update_r) hooks failed, removing configuration
Jan 16 19:53:09 asdf711 torbrowser.desktop[13435]: Launching './Browser/start-tor-browser --detach'...
Jan 16 19:53:10 asdf711 torbrowser.desktop[13435]: Tor Browser Launcher
Jan 16 19:53:10 asdf711 torbrowser.desktop[13435]: By Micah Lee, licensed under MIT
Jan 16 19:53:10 asdf711 torbrowser.desktop[13435]: version 0.2.4
Jan 16 19:53:10 asdf711 torbrowser.desktop[13435]: https://github.com/micahflee/torbrowser-launcher
Jan 16 19:53:25 asdf711 sudo: pam_ecryptfs: pam_sm_authenticate: /home/asdf711 is already mounted
Jan 16 19:53:25 asdf711 kernel: [ 3892.632419] usbcore: deregistering interface driver snd-usb-audio
Jan 16 19:53:34 asdf711 wpa_supplicant[1077]: wlp58s0: WPA: Group rekeying completed with 38:10:d5:2a:93:68 [GTK=CCMP]
Jan 16 19:54:02 asdf711 kernel: [ 3929.704111] usbcore: registered new interface driver snd-usb-audio
Jan 16 19:54:02 asdf711 systemd-udevd[13544]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 1' failed with exit code 22.

Hmm da ist das Problem wahrscheinlich

Jan 16 19:54:02 asdf711 systemd-udevd[13544]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 1' failed with exit code 22.
[ 3341.027395] snd-usb-audio: probe of 1-2:1.0 failed with error -11
[ 3341.027851] usb 1-2: USB disconnect, device number 9

an was für ein USB Port hängt er genau?