lol wut. Pulseaudio hab ich wieder an, ja.
Hab die idProduct auf 1010 geändert und jetzt funktioniert es. Die Karte taucht unter pavucontrol auf und ich kann sie einfach anwählen. Perfekt. Vielen Dank für deine Mühe, man!
Traktor Audio 6 erkannt, aber nicht anwählbar
|
(Themenstarter)
Anmeldungsdatum: Beiträge: Zähle... |
|
|
Anmeldungsdatum: Beiträge: Zähle... |
Hallo, ich habe das gleiche Problem, hab es versucht so wie oben beschrieben zu lösen. Hat aber leider nicht funktioniert. ☹ Hast du noch eine andere Idee? Bei dmsg steht "1011", in der .config auch. Vielleicht ist etwas anderes nicht richtig? |
Anmeldungsdatum: Beiträge: 19617 Wohnort: Schleswig-Holstein |
Willkommen im Forum ☺ Du gehst davon aus das du das selbe Problem hast 😊 Bevor du dein eigenes Thread aufmachst zeige mal bitte die Terminal Ausgaben von dmesg sowie cat /lib/udev/rules.d/90-pulseaudio.rules sowie pactl list cards Das ganze bitte im codeblock (links neben dem Smiley) Dann sehe ich es mir mal an. |
|
Anmeldungsdatum: Beiträge: 3 |
Ich danke dir für deine schnelle Antwort! Dmesg: [ 0.315345] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.315347] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.315350] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff] [ 0.315352] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff] [ 0.315355] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff] [ 0.315357] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff] [ 0.315359] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff] [ 0.315362] pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff] [ 0.315364] pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff] [ 0.315366] pci_bus 0000:00: resource 15 [mem 0xffc00000-0xffdfffff] [ 0.315369] pci_bus 0000:00: resource 16 [mem 0x120000000-0x317ffffff] [ 0.315372] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff] [ 0.315374] pci_bus 0000:0b: resource 1 [mem 0xf0200000-0xf03fffff] [ 0.315377] pci_bus 0000:0b: resource 2 [mem 0x120000000-0x1201fffff 64bit pref] [ 0.315379] pci_bus 0000:0c: resource 0 [io 0x3000-0x3fff] [ 0.315382] pci_bus 0000:0c: resource 1 [mem 0xf6900000-0xf69fffff] [ 0.315384] pci_bus 0000:0c: resource 2 [mem 0x120200000-0x1203fffff 64bit pref] [ 0.315387] pci_bus 0000:09: resource 0 [io 0xd000-0xdfff] [ 0.315390] pci_bus 0000:09: resource 1 [mem 0xf6800000-0xf68fffff] [ 0.315392] pci_bus 0000:09: resource 2 [mem 0x120400000-0x1205fffff 64bit pref] [ 0.315395] pci_bus 0000:0d: resource 0 [io 0xc000-0xcfff] [ 0.315397] pci_bus 0000:0d: resource 1 [mem 0xf6600000-0xf67fffff] [ 0.315400] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.315403] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.315405] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.315408] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.315410] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] [ 0.315413] pci_bus 0000:03: resource 8 [mem 0xe0000000-0xf7ffffff] [ 0.315415] pci_bus 0000:03: resource 9 [mem 0xfc000000-0xfebfffff] [ 0.315417] pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff] [ 0.315420] pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff] [ 0.315422] pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff] [ 0.315425] pci_bus 0000:03: resource 13 [mem 0xfeda7000-0xfedfffff] [ 0.315427] pci_bus 0000:03: resource 14 [mem 0xfee10000-0xff9fffff] [ 0.315429] pci_bus 0000:03: resource 15 [mem 0xffc00000-0xffdfffff] [ 0.315432] pci_bus 0000:03: resource 16 [mem 0x120000000-0x317ffffff] [ 0.315468] NET: Registered protocol family 2 [ 0.315729] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.315863] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.316055] TCP: Hash tables configured (established 32768 bind 32768) [ 0.316119] TCP: reno registered [ 0.316131] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.316162] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.316285] NET: Registered protocol family 1 [ 0.316312] pci 0000:00:02.0: Video device with shadowed ROM [ 0.318887] PCI: CLS 64 bytes, default 64 [ 0.319001] Trying to unpack rootfs image as initramfs... [ 0.957297] Freeing initrd memory: 28720K (ffff8800347d8000 - ffff8800363e4000) [ 0.957381] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.957386] software IO TLB [mem 0xd98bf000-0xdd8bf000] (64MB) mapped at [ffff8800d98bf000-ffff8800dd8befff] [ 0.957649] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07 [ 0.957656] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07 [ 0.957750] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.957783] Scanning for low memory corruption every 60 seconds [ 0.958152] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.958179] Initialise system trusted keyring [ 0.958207] audit: initializing netlink subsys (disabled) [ 0.958231] audit: type=2000 audit(1493817941.956:1): initialized [ 0.958700] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.961251] zpool: loaded [ 0.961254] zbud: loaded [ 0.961467] VFS: Disk quotas dquot_6.5.2 [ 0.961525] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.962265] fuse init (API version 7.23) [ 0.962410] msgmni has been set to 7823 [ 0.962499] Key type big_key registered [ 0.962990] Key type asymmetric registered [ 0.962994] Asymmetric key parser 'x509' registered [ 0.963057] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.963121] io scheduler noop registered [ 0.963125] io scheduler deadline registered (default) [ 0.963202] io scheduler cfq registered [ 0.963346] pcieport 0000:00:1c.0: device [8086:2940] has invalid IRQ; check vendor BIOS [ 0.963561] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.963668] pcieport 0000:00:1c.1: device [8086:2942] has invalid IRQ; check vendor BIOS [ 0.963830] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.963925] pcieport 0000:00:1c.2: device [8086:2944] has invalid IRQ; check vendor BIOS [ 0.964127] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 0.964226] pcieport 0000:00:1c.4: device [8086:2948] has invalid IRQ; check vendor BIOS [ 0.964390] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X [ 0.964526] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.964549] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.964624] vesafb: mode is 1280x800x32, linelength=5120, pages=0 [ 0.964626] vesafb: scrolling: redraw [ 0.964629] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.964635] mtrr: type mismatch for e0000000,400000 old: write-back new: write-combining [ 0.964638] mtrr: type mismatch for e0000000,200000 old: write-back new: write-combining [ 0.964640] mtrr: type mismatch for e0000000,100000 old: write-back new: write-combining [ 0.964643] mtrr: type mismatch for e0000000,80000 old: write-back new: write-combining [ 0.964646] mtrr: type mismatch for e0000000,40000 old: write-back new: write-combining [ 0.964648] mtrr: type mismatch for e0000000,20000 old: write-back new: write-combining [ 0.964651] mtrr: type mismatch for e0000000,10000 old: write-back new: write-combining [ 0.964653] mtrr: type mismatch for e0000000,8000 old: write-back new: write-combining [ 0.964656] mtrr: type mismatch for e0000000,4000 old: write-back new: write-combining [ 0.964658] mtrr: type mismatch for e0000000,2000 old: write-back new: write-combining [ 0.964661] mtrr: type mismatch for e0000000,1000 old: write-back new: write-combining [ 0.964685] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004780000, using 4032k, total 4032k [ 0.964819] Console: switching to colour frame buffer device 160x50 [ 0.964851] fb0: VESA VGA frame buffer device [ 0.964886] intel_idle: does not run on family 6 model 23 [ 0.965038] ACPI: AC Adapter [AC] (off-line) [ 0.965183] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.966749] ACPI: Lid Switch [LID] [ 0.966811] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.966815] ACPI: Power Button [PBTN] [ 0.966873] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.966876] ACPI: Sleep Button [SBTN] [ 0.966998] Monitor-Mwait will be used to enter C-1 state [ 0.967004] Monitor-Mwait will be used to enter C-2 state [ 0.967009] tsc: Marking TSC unstable due to TSC halts in idle [ 0.967014] ACPI: acpi_idle registered with cpuidle [ 0.984629] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.984633] ACPI: Thermal Zone [THM] (28 C) [ 0.984688] GHES: HEST is not enabled! [ 0.988673] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.019274] Linux agpgart interface v0.103 [ 1.019752] agpgart-intel 0000:00:00.0: Intel GM45 Chipset [ 1.019775] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 1.020500] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 1.021420] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 1.028752] ACPI: Battery Slot [BAT0] (battery present) [ 1.029693] brd: module loaded [ 1.030823] loop: module loaded [ 1.031157] libphy: Fixed MDIO Bus: probed [ 1.031162] tun: Universal TUN/TAP device driver, 1.6 [ 1.031164] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 1.031245] PPP generic driver version 2.4.2 [ 1.031318] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.031324] ehci-pci: EHCI PCI platform driver [ 1.031563] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 1.031573] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.031595] ehci-pci 0000:00:1a.7: debug port 1 [ 1.035510] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 1.035533] ehci-pci 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 1.044025] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.044105] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.044108] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.044110] usb usb1: Product: EHCI Host Controller [ 1.044113] usb usb1: Manufacturer: Linux 3.16.0-38-generic ehci_hcd [ 1.044115] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.044306] hub 1-0:1.0: USB hub found [ 1.044316] hub 1-0:1.0: 6 ports detected [ 1.044806] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.044818] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.044834] ehci-pci 0000:00:1d.7: debug port 1 [ 1.048754] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 1.048774] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 1.060055] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.060106] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.060109] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.060112] usb usb2: Product: EHCI Host Controller [ 1.060114] usb usb2: Manufacturer: Linux 3.16.0-38-generic ehci_hcd [ 1.060116] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.060297] hub 2-0:1.0: USB hub found [ 1.060306] hub 2-0:1.0: 6 ports detected [ 1.060592] ehci-platform: EHCI generic platform driver [ 1.060613] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.060620] ohci-pci: OHCI PCI platform driver [ 1.060642] ohci-platform: OHCI generic platform driver [ 1.060654] uhci_hcd: USB Universal Host Controller Interface driver [ 1.060848] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.060856] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.060865] uhci_hcd 0000:00:1a.0: detected 2 ports [ 1.060889] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60 [ 1.060953] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.060956] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.060958] usb usb3: Product: UHCI Host Controller [ 1.060961] usb usb3: Manufacturer: Linux 3.16.0-38-generic uhci_hcd [ 1.060963] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.061153] hub 3-0:1.0: USB hub found [ 1.061162] hub 3-0:1.0: 2 ports detected [ 1.061467] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.061475] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.061484] uhci_hcd 0000:00:1a.1: detected 2 ports [ 1.061520] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80 [ 1.061583] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.061585] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.061588] usb usb4: Product: UHCI Host Controller [ 1.061590] usb usb4: Manufacturer: Linux 3.16.0-38-generic uhci_hcd [ 1.061593] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.061776] hub 4-0:1.0: USB hub found [ 1.061785] hub 4-0:1.0: 2 ports detected [ 1.062092] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.062100] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.062108] uhci_hcd 0000:00:1a.2: detected 2 ports [ 1.062132] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0 [ 1.062195] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.062198] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.062200] usb usb5: Product: UHCI Host Controller [ 1.062203] usb usb5: Manufacturer: Linux 3.16.0-38-generic uhci_hcd [ 1.062205] usb usb5: SerialNumber: 0000:00:1a.2 [ 1.062386] hub 5-0:1.0: USB hub found [ 1.062395] hub 5-0:1.0: 2 ports detected [ 1.062697] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.062705] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.062714] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.062740] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00 [ 1.062805] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.062808] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.062810] usb usb6: Product: UHCI Host Controller [ 1.062813] usb usb6: Manufacturer: Linux 3.16.0-38-generic uhci_hcd [ 1.062815] usb usb6: SerialNumber: 0000:00:1d.0 [ 1.062992] hub 6-0:1.0: USB hub found [ 1.063001] hub 6-0:1.0: 2 ports detected [ 1.063311] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.063319] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.063327] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.063349] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20 [ 1.063411] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.063414] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.063416] usb usb7: Product: UHCI Host Controller [ 1.063419] usb usb7: Manufacturer: Linux 3.16.0-38-generic uhci_hcd [ 1.063421] usb usb7: SerialNumber: 0000:00:1d.1 [ 1.063598] hub 7-0:1.0: USB hub found [ 1.063607] hub 7-0:1.0: 2 ports detected [ 1.063909] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.063919] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.063927] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.063950] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 1.064032] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.064035] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.064038] usb usb8: Product: UHCI Host Controller [ 1.064040] usb usb8: Manufacturer: Linux 3.16.0-38-generic uhci_hcd [ 1.064043] usb usb8: SerialNumber: 0000:00:1d.2 [ 1.064213] hub 8-0:1.0: USB hub found [ 1.064222] hub 8-0:1.0: 2 ports detected [ 1.064471] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.083369] i8042: Detected active multiplexing controller, rev 1.1 [ 1.096070] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.096076] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.096120] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.096151] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.096186] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.096400] mousedev: PS/2 mouse device common for all mice [ 1.097099] rtc_cmos 00:03: RTC can wake from S4 [ 1.097287] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.097323] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.097437] device-mapper: uevent: version 1.0.3 [ 1.097565] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.097587] ledtrig-cpu: registered to indicate activity on CPUs [ 1.097720] TCP: cubic registered [ 1.097895] NET: Registered protocol family 10 [ 1.098217] NET: Registered protocol family 17 [ 1.098235] Key type dns_resolver registered [ 1.098649] Loading compiled-in X.509 certificates [ 1.099968] Loaded X.509 cert 'Magrathea: Glacier signing key: c284edaccf0b473652c34d23bec356944236e63b' [ 1.099991] registered taskstats version 1 [ 1.102889] Key type trusted registered [ 1.107979] Key type encrypted registered [ 1.107991] AppArmor: AppArmor sha1 policy hashing enabled [ 1.107995] ima: No TPM chip found, activating TPM-bypass! [ 1.108044] evm: HMAC attrs: 0x1 [ 1.108754] Magic number: 1:969:431 [ 1.108909] rtc_cmos 00:03: setting system clock to 2017-05-03 13:25:42 UTC (1493817942) [ 1.110454] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.110457] EDD information not available. [ 1.110549] PM: Hibernation image not present or could not be loaded. [ 1.112539] Freeing unused kernel memory: 1352K (ffffffff81d1c000 - ffffffff81e6e000) [ 1.112545] Write protecting the kernel read-only data: 12288k [ 1.114865] Freeing unused kernel memory: 556K (ffff880001775000 - ffff880001800000) [ 1.116762] Freeing unused kernel memory: 500K (ffff880001b83000 - ffff880001c00000) [ 1.126367] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.136744] systemd-udevd[101]: starting version 204 [ 1.170402] sky2: driver version 1.30 [ 1.170586] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0 [ 1.170670] sky2 0000:09:00.0: irq 44 for MSI/MSI-X [ 1.171025] sky2 0000:09:00.0 eth0: addr 00:25:64:7e:26:a0 [ 1.176151] [drm] Initialized drm 1.1.0 20060810 [ 1.177772] wmi: Mapper loaded [ 1.206646] [drm] Memory usable by graphics device = 2048M [ 1.206652] checking generic (e0000000 3f0000) vs hw (e0000000 10000000) [ 1.206654] fb: switching to inteldrmfb from VESA VGA [ 1.206685] Console: switching to colour dummy device 80x25 [ 1.206779] [drm] Replacing VGA console driver [ 1.228094] i915 0000:00:02.0: irq 45 for MSI/MSI-X [ 1.228110] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.228111] [drm] Driver supports precise vblank timestamp query. [ 1.228195] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.386128] usb 1-5: new high-speed USB device number 2 using ehci-pci [ 1.389992] fbcon: inteldrmfb (fb0) is primary device [ 1.390035] Console: switching to colour frame buffer device 200x56 [ 1.390080] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.390083] i915 0000:00:02.0: registered panic notifier [ 1.392269] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 1.515854] acpi device:3b: registered as cooling_device2 [ 1.516372] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input9 [ 1.516488] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 1.516521] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.516569] ahci 0000:00:1f.2: version 3.0 [ 1.516822] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X [ 1.516875] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.516920] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 1.516924] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems [ 1.541050] scsi0 : ahci [ 1.541244] scsi1 : ahci [ 1.541395] scsi2 : ahci [ 1.541542] scsi3 : ahci [ 1.541688] scsi4 : ahci [ 1.541832] scsi5 : ahci [ 1.541914] ata1: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c900 irq 46 [ 1.541918] ata2: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c980 irq 46 [ 1.541920] ata3: DUMMY [ 1.541922] ata4: DUMMY [ 1.541925] ata5: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb00 irq 46 [ 1.541928] ata6: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb80 irq 46 [ 1.547099] usb 1-5: New USB device found, idVendor=0bda, idProduct=0158 [ 1.547103] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.547106] usb 1-5: Product: USB2.0-CRW [ 1.547109] usb 1-5: Manufacturer: Generic [ 1.547111] usb 1-5: SerialNumber: 20071114173400000 [ 1.555974] usbcore: registered new interface driver usb-storage [ 1.558045] usbcore: registered new interface driver uas [ 1.559893] ums-realtek 1-5:1.0: USB Mass Storage device detected [ 1.574165] scsi6 : usb-storage 1-5:1.0 [ 1.574298] usbcore: registered new interface driver ums-realtek [ 1.664084] usb 1-6: new high-speed USB device number 3 using ehci-pci [ 1.860051] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.871981] usb 1-6: New USB device found, idVendor=0c45, idProduct=6400 [ 1.871985] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 1.871987] usb 1-6: Product: Integrated_Webcam_1.3M [ 1.871990] usb 1-6: Manufacturer: CN0R019P724879BB0FFG [ 1.874923] usb 1-5: USB disconnect, device number 2 [ 1.907046] ata1.00: ATA-8: WDC WD3200BEVT-75ZCT2, 11.01A11, max UDMA/133 [ 1.907050] ata1.00: 625142448 sectors, multi 8: LBA48 NCQ (depth 31/32), AA [ 1.909662] ata1.00: configured for UDMA/133 [ 1.909826] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-7 1A11 PQ: 0 ANSI: 5 [ 1.910187] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.910195] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.910258] sd 0:0:0:0: [sda] Write Protect is off [ 1.910262] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.910345] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.937467] sda: sda1 sda2 < sda5 > [ 1.938000] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.228383] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.249437] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633C, DW40, max UDMA/100 [ 2.249441] ata2.00: applying bridge limits [ 2.269684] ata2.00: configured for UDMA/100 [ 2.272021] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633C DW40 PQ: 0 ANSI: 5 [ 2.293189] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.293192] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.293397] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.293509] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.555455] psmouse serio2: synaptics: queried max coordinates: x [..5650], y [..4710] [ 2.612066] ata5: SATA link down (SStatus 0 SControl 300) [ 2.665543] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 0, fw id: 581785 [ 2.738758] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10 [ 2.932065] ata6: SATA link down (SStatus 0 SControl 300) [ 4.400944] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 5.133602] random: nonblocking pool is initialized [ 16.117201] Adding 4153340k swap on /dev/sda5. Priority:-1 extents:1 across:4153340k FS [ 16.414689] systemd-udevd[365]: starting version 204 [ 16.420410] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 16.565579] lp: driver loaded but no devices found [ 16.678096] ppdev: user-space parallel port driver [ 16.751795] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.811391] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 16.847518] sound hdaudioC0D0: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker [ 16.847523] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 16.847526] sound hdaudioC0D0: hp_outs=1 (0xa/0x0/0x0/0x0/0x0) [ 16.847528] sound hdaudioC0D0: mono: mono_out=0x0 [ 16.847531] sound hdaudioC0D0: inputs: [ 16.847533] sound hdaudioC0D0: Internal Mic=0x18 [ 16.847536] sound hdaudioC0D0: Mic=0xb [ 16.859000] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 16.859117] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 16.882652] cfg80211: Calling CRDA to update world regulatory domain [ 16.997172] wl: module license 'MIXED/Proprietary' taints kernel. [ 16.997177] Disabling lock debugging due to kernel taint [ 17.012075] wl: module verification failed: signature and/or required key missing - tainting kernel [ 17.064854] device-mapper: multipath: version 1.7.0 loaded [ 17.156851] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 17.379102] wlan0: Broadcom BCM4315 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574) [ 17.565137] input: Dell WMI hotkeys as /devices/virtual/input/input15 [ 17.567732] media: Linux media interface: v0.10 [ 17.581900] Linux video capture interface: v2.00 [ 17.594794] gpio_ich: GPIO from 195 to 255 on gpio_ich [ 17.615934] uvcvideo: Found UVC 1.00 device Integrated_Webcam_1.3M (0c45:6400) [ 17.628208] input: Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input16 [ 17.628472] usbcore: registered new interface driver uvcvideo [ 17.628475] USB Video Class driver (1.1.1) [ 17.811812] cfg80211: World regulatory domain updated: [ 17.811818] cfg80211: DFS Master region: unset [ 17.811820] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 17.811824] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 17.811827] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 17.811829] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 17.811832] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 17.811835] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 18.479403] init: failsafe main process (633) killed by TERM signal [ 19.836258] Bluetooth: Core ver 2.19 [ 19.836287] NET: Registered protocol family 31 [ 19.836290] Bluetooth: HCI device and connection manager initialized [ 19.836300] Bluetooth: HCI socket layer initialized [ 19.836303] Bluetooth: L2CAP socket layer initialized [ 19.836316] Bluetooth: SCO socket layer initialized [ 19.845197] Bluetooth: RFCOMM TTY layer initialized [ 19.845212] Bluetooth: RFCOMM socket layer initialized [ 19.845225] Bluetooth: RFCOMM ver 1.11 [ 19.861242] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 19.861247] Bluetooth: BNEP filters: protocol multicast [ 19.861259] Bluetooth: BNEP socket layer initialized [ 20.009493] init: cups main process (725) killed by HUP signal [ 20.009510] init: cups main process ended, respawning [ 22.096613] sky2 0000:09:00.0 eth0: enabling interface [ 22.098466] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.444116] init: samba-ad-dc main process (821) terminated with status 1 [ 23.449059] init: plymouth-upstart-bridge main process ended, respawning [ 23.468953] init: plymouth-upstart-bridge main process ended, respawning [ 25.538588] init: plymouth-stop pre-start process (1419) terminated with status 1 [ 163.967462] atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0). [ 163.967469] atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known. [ 474.150622] perf interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 1021.104118] usb 2-3: new high-speed USB device number 2 using ehci-pci [ 1021.236991] usb 2-3: New USB device found, idVendor=17cc, idProduct=1011 [ 1021.236998] usb 2-3: New USB device strings: Mfr=12, Product=7, SerialNumber=13 [ 1021.237003] usb 2-3: Product: Traktor Audio 6 [ 1021.237007] usb 2-3: Manufacturer: Native Instruments [ 1021.237011] usb 2-3: SerialNumber: 703CD50B [ 1021.324799] usbcore: registered new interface driver snd-usb-audio cat /lib/udev/rules.d/90-pulseaudio.rules: # do not edit this file, it will be overwritten on update
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as
# published by the Free Software Foundation; either version 2.1 of the
# License, or (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# Lesser General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
SUBSYSTEM!="sound", GOTO="pulseaudio_end"
ACTION!="change", GOTO="pulseaudio_end"
KERNEL!="card*", GOTO="pulseaudio_end"
SUBSYSTEMS=="usb", GOTO="pulseaudio_check_usb"
SUBSYSTEMS=="platform", DRIVERS=="thinkpad_acpi", ENV{PULSE_IGNORE}="1"
# NVidia and Intel HDAs often have more than one HDMI codec/port on the same card
ATTRS{vendor}=="0x10de", ENV{PULSE_PROFILE_SET}="extra-hdmi.conf"
ATTRS{vendor}=="0x8086", ENV{PULSE_PROFILE_SET}="extra-hdmi.conf"
# Force enable speaker and internal mic for some laptops
# This should only be necessary for kernels 3.3, 3.4 and 3.5 (as they are lacking the phantom jack kctls).
# Acer AOA150
ATTRS{subsystem_vendor}=="0x1025", ATTRS{subsystem_device}=="0x015b", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Acer Aspire 4810TZ
ATTRS{subsystem_vendor}=="0x1025", ATTRS{subsystem_device}=="0x022a", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Packard bell dot m/a
ATTRS{subsystem_vendor}=="0x1025", ATTRS{subsystem_device}=="0x028c", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Acer Aspire 1810TZ
ATTRS{subsystem_vendor}=="0x1025", ATTRS{subsystem_device}=="0x029b", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Acer AOD260 and AO532h
ATTRS{subsystem_vendor}=="0x1025", ATTRS{subsystem_device}=="0x0349", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Dell MXC051
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x01b5", ENV{PULSE_PROFILE_SET}="force-speaker.conf"
# Dell Inspiron 6400 and E1505
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x01bd", ENV{PULSE_PROFILE_SET}="force-speaker.conf"
# Dell Latitude D620
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x01c2", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Dell Latitude D820
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x01cc", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Dell Latitude D520
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x01d4", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Dell Latitude D420
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x01d6", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Dell Inspiron 1525
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x022f", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Dell Inspiron 1011
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x02f4", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Dell XPS 14 (L401X)
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x0468", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Dell XPS 15 (L501X)
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x046e", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Dell XPS 15 (L502X)
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x050e", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Dell Inspiron 3420
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x0553", ENV{PULSE_PROFILE_SET}="force-speaker.conf"
# Dell Inspiron 3520
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x0555", ENV{PULSE_PROFILE_SET}="force-speaker.conf"
# Dell Vostro 2420
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x0556", ENV{PULSE_PROFILE_SET}="force-speaker.conf"
# Dell Vostro 2520
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x0558", ENV{PULSE_PROFILE_SET}="force-speaker.conf"
# Dell Inspiron One 2020
ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x0579", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Asus 904HA (1000H)
ATTRS{subsystem_vendor}=="0x1043", ATTRS{subsystem_device}=="0x831a", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Asus T101MT
ATTRS{subsystem_vendor}=="0x1043", ATTRS{subsystem_device}=="0x83ce", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Sony Vaio VGN-SR21M
ATTRS{subsystem_vendor}=="0x104d", ATTRS{subsystem_device}=="0x9033", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Sony Vaio VPC-W115XG
ATTRS{subsystem_vendor}=="0x104d", ATTRS{subsystem_device}=="0x9064", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Fujitsu Lifebook S7110
ATTRS{subsystem_vendor}=="0x10cf", ATTRS{subsystem_device}=="0x1397", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Fujitsu Lifebook A530
ATTRS{subsystem_vendor}=="0x10cf", ATTRS{subsystem_device}=="0x1531", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Toshiba A200
ATTRS{subsystem_vendor}=="0x1179", ATTRS{subsystem_device}=="0xff00", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# MSI X360
ATTRS{subsystem_vendor}=="0x1462", ATTRS{subsystem_device}=="0x1053", ENV{PULSE_PROFILE_SET}="force-speaker-and-int-mic.conf"
# Lenovo 3000 Y410
ATTRS{subsystem_vendor}=="0x17aa", ATTRS{subsystem_device}=="0x384e", ENV{PULSE_PROFILE_SET}="force-speaker.conf"
GOTO="pulseaudio_end"
LABEL="pulseaudio_check_usb"
ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="1978", ENV{PULSE_PROFILE_SET}="native-instruments-audio8dj.conf"
ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="0839", ENV{PULSE_PROFILE_SET}="native-instruments-audio4dj.conf"
ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="baff", ENV{PULSE_PROFILE_SET}="native-instruments-traktorkontrol-s4.conf"
ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="4711", ENV{PULSE_PROFILE_SET}="native-instruments-korecontroller.conf"
ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="041d", ENV{PULSE_PROFILE_SET}="native-instruments-traktor-audio2.conf"
ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="1011", ENV{PULSE_PROFILE_SET}="native-instruments-traktor-audio6.conf"
ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="1021", ENV{PULSE_PROFILE_SET}="native-instruments-traktor-audio10.conf"
ATTRS{idVendor}=="0763", ATTRS{idProduct}=="2012", ENV{PULSE_PROFILE_SET}="maudio-fasttrack-pro.conf"
ATTRS{idVendor}=="045e", ATTRS{idProduct}=="02bb", ENV{PULSE_PROFILE_SET}="kinect-audio.conf"
LABEL="pulseaudio_end"pactl list cards: Card #0 Name: alsa_card.pci-0000_00_1b.0 Driver: module-alsa-card.c Owner Module: 4 Properties: alsa.card = "0" alsa.card_name = "HDA Intel" alsa.long_card_name = "HDA Intel at 0xf6afc000 irq 47" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "293e" device.product.name = "82801I (ICH9 Family) HD Audio Controller" device.form_factor = "internal" device.string = "0" device.description = "Built-in Audio" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Profiles: input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority. 60) output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority. 6000) output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority. 6060) off: Off (sinks: 0, sources: 0, priority. 0) Active Profile: output:analog-stereo Ports: analog-input-microphone-internal: Internal Microphone (priority: 8900, latency offset: 0 usec) Properties: device.icon_name = "audio-input-microphone" Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo analog-input: Analog Input (priority: 10000, latency offset: 0 usec) Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo analog-input-microphone: Microphone (priority: 8700, latency offset: 0 usec, not available) Properties: device.icon_name = "audio-input-microphone" Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo analog-output-speaker: Speakers (priority: 10000, latency offset: 0 usec) Properties: device.icon_name = "audio-speakers" Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo analog-output-headphones: Headphones (priority: 9000, latency offset: 0 usec, not available) Properties: device.icon_name = "audio-headphones" Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo Card #1 Name: alsa_card.usb-Native_Instruments_Traktor_Audio_6_703CD50B-00-T6 Driver: module-alsa-card.c Owner Module: 23 Properties: alsa.card = "1" alsa.card_name = "Traktor Audio 6" alsa.long_card_name = "Native Instruments Traktor Audio 6 at usb-0000:00:1d.7-3, high speed" alsa.driver_name = "snd_usb_audio" device.bus_path = "pci-0000:00:1d.7-usb-0:3:1.0" sysfs.path = "/devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.0/sound/card1" udev.id = "usb-Native_Instruments_Traktor_Audio_6_703CD50B-00-T6" device.bus = "usb" device.vendor.id = "17cc" device.vendor.name = "Native Instruments" device.product.id = "1011" device.product.name = "Traktor Audio 6" device.serial = "Native_Instruments_Traktor_Audio_6_703CD50B" device.string = "1" device.description = "Traktor Audio 6" module-udev-detect.discovered = "1" device.icon_name = "audio-card-usb" Profiles: output:analog-stereo-all+input:analog-stereo-all: Analog Stereo Duplex Channels A, B (Headphones) (sinks: 3, sources: 3, priority. 100) output:analog-stereo-main+input:analog-stereo-main: Analog Stereo Duplex Channel Main (sinks: 1, sources: 1, priority. 50) output:analog-stereo-a+input:analog-stereo-a: Analog Stereo Duplex Channel A (sinks: 1, sources: 1, priority. 40) output:analog-stereo-b+input:analog-stereo-b: Analog Stereo Duplex Channel B (sinks: 1, sources: 1, priority. 30) off: Off (sinks: 0, sources: 0, priority. 0) Active Profile: output:analog-stereo-main+input:analog-stereo-main |
|
Anmeldungsdatum: Beiträge: 19617 Wohnort: Schleswig-Holstein |
Teste mal folgendes im Terminal pacmd set-card-profile alsa_card.usb-Native_Instruments_Traktor_Audio_6_703CD50B-00-T6 output:analog-stereo-all+input:analog-stereo-all Hast du jetzt Ton? Mit was spielst du zur Zeit Ton ab?VLC? Zeige auch mal pactl list sinks Wenn was abgespielt wird. |
|
Anmeldungsdatum: Beiträge: 3 |
Hatte es bis jetzt noch nicht mit dem VLC-Player versucht, aber da kommt plötlich Ton raus! Allerdings wahnsinnig verzerrt. Und andere Anwendungen geben immer noch keinen Ton aus... ☹ Beim abspielen über VLC und Spotify gibt es keinen Unterschied (soweit ich das beurteilen kann), beide mal wird genau das hier ausgegeben: pactl list sinks: Sink #0 State: IDLE Name: alsa_output.pci-0000_00_1b.0.analog-stereo Description: Built-in Audio Analog Stereo Driver: module-alsa-card.c Sample Specification: s16le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 4 Mute: no Volume: 0: 50% 1: 50% 0: -17,99 dB 1: -17,99 dB balance 0,00 Base Volume: 100% 0,00 dB Monitor Source: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor Latency: 16356 usec, configured 20000 usec Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY Properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "92HD71B7X Analog" alsa.id = "92HD71B7X Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "HDA Intel" alsa.long_card_name = "HDA Intel at 0xf6afc000 irq 47" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "293e" device.product.name = "82801I (ICH9 Family) HD Audio Controller" device.form_factor = "internal" device.string = "front:0" device.buffering.buffer_size = "65536" device.buffering.fragment_size = "32768" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "Built-in Audio Analog Stereo" alsa.mixer_name = "IDT 92HD71B7X" alsa.components = "HDA:111d76b2,10280406,00100302" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Ports: analog-output-speaker: Speakers (priority: 10000) analog-output-headphones: Headphones (priority: 9000, not available) Active Port: analog-output-speaker Formats: pcm |
|
Anmeldungsdatum: Beiträge: 19617 Wohnort: Schleswig-Holstein |
Das Problem sitzt doch wohl etwas tiefer als gedacht 😐 Mache bitte ein neues Thema auf mit z.b. Traktor Audio 6 erkannt,keine Wiedergabe. |