Eine Frage hätte ich da noch:

Kann Kaffeine auch mit Plugins umgehen a la vplug ?

Was ist das ?

Öhm ja ^^

Macht dunkle Sender hell

Ja, sowas gibt es...aber wie ich gehört habe, hat ein Sender die Kodierung umgestellt und deshalb wird zur Zeit nichts mehr hell...

Och da gibts ja noch andere interressante

Ich kann keine PNs hier schreiben. Seite kann nicht angzeigt werden.

Wie ist denn der Name dafür, für das Teil was ich benötige? Den Rest finde ich sicher selbst.

Es handelt sich hierbei um das Kaffeine sc-plugin...

Danke dir

WAWA schrieb:

Öhm ja ^^

Macht dunkle Sender hell

aha soso. aber, soweit ich mich mal auf Windowsseite damit belesen habe, geht sowas "dunkel auf hell" nur mit diesen cardslots, für diese CI Karten die die PayTV Sender dir schicken sobald du bezahlt hast. die betreiben die dann mit.. "modifizierten" Karten und machen so dunkle Sender hell...

@WAWA Mal ne Frage am Rande am Rande, welche Hardware hast du so wenn du echten HDTV sehen willst (kannst)? Afaik braucht's dafür Hardware vom ziemlich oberen Ende der Fahnenstange was es heute an Hardware gibt, und mit 32bit braucht man gar nicht erst probieren...

64 Bit und 3 Kölsch

und für ORF ATV brauchts keine card

*HEUL*

Gestern ka die Meldung wegen wichtiger System-Updates. Die habe ich dann gemacht. Schwupps war die Karte weg. Auch in Kaffeine.

Nach Stunden habe ich dann aufgegeben. Gerade eben neu Ubuntu installiert, dann zuerst die Updates (waren auch Kernel-Updates drin), dann ddie Anleitung von dir abgearbeitet, aber Kaffeine findet immernoch keine TV Karte obwohl sie im System zu sehen ist.

[    0.013141] Initializing cgroup subsys ns
[    0.013144] Initializing cgroup subsys cpuacct
[    0.013146] Initializing cgroup subsys memory
[    0.013159] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.013161] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.013162] CPU 0/0 -> Node 0
[    0.013163] tseg: 0000000000
[    0.013173] CPU: Physical Processor ID: 0
[    0.013174] CPU: Processor Core ID: 0
[    0.013181] using C1E aware idle routine
[    0.014176] ACPI: Core revision 20080609
[    0.016653] ACPI: Checking initramfs for custom DSDT
[    0.253183] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.292879] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[    0.292882] Using local APIC timer interrupts.
[    0.296019] APIC timer calibration result 12532481
[    0.296020] Detected 12.532 MHz APIC timer.
[    0.296130] Booting processor 1/1 ip 6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 6015.61 BogoMIPS (lpj=12031238)
[    0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.004000] CPU 1/1 -> Node 0
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.384175] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[    0.384186] Brought up 2 CPUs
[    0.384188] Total of 2 processors activated (12031.20 BogoMIPS).
[    0.384225] CPU0 attaching sched-domain:
[    0.384227]  domain 0: span 0-1 level CPU
[    0.384229]   groups: 0 1
[    0.384231]   domain 1: span 0-1 level NODE
[    0.384233]    groups: 0-1
[    0.384236] CPU1 attaching sched-domain:
[    0.384237]  domain 0: span 0-1 level CPU
[    0.384239]   groups: 1 0
[    0.384241]   domain 1: span 0-1 level NODE
[    0.384242]    groups: 0-1
[    0.384303] net_namespace: 1552 bytes
[    0.384303] Booting paravirtualized kernel on bare hardware
[    0.384303] Time:  0:28:33  Date: 02/09/09
[    0.384303] NET: Registered protocol family 16
[    0.384303] node 0 link 0: io port [1000, ffffff]
[    0.384303] TOM: 00000000d0000000 aka 3328M
[    0.384303] node 0 link 0: mmio [a0000, bffff]
[    0.384303] node 0 link 0: mmio [d0000000, efffffff]
[    0.384303] node 0 link 0: mmio [f0000000, fe7fffff]
[    0.384303] node 0 link 0: mmio [fe800000, fe8fffff]
[    0.384303] node 0 link 0: mmio [fe900000, ffefffff]
[    0.384303] TOM2: 00000001b0000000 aka 6912M
[    0.384303] bus: [00,07] on node 0 link 0
[    0.384303] bus: 00 index 0 io port: [0, ffff]
[    0.384303] bus: 00 index 1 mmio: [a0000, bffff]
[    0.384303] bus: 00 index 2 mmio: [d0000000, ffffffff]
[    0.384303] bus: 00 index 3 mmio: [1b0000000, fcffffffff]
[    0.384303] ACPI: bus type pci registered
[    0.384303] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.384303] PCI: Not using MMCONFIG.
[    0.384303] PCI: Using configuration type 1 for base access
[    0.384303] mtrr: your CPUs had inconsistent fixed MTRR settings
[    0.384303] mtrr: probably your BIOS does not setup all CPUs.
[    0.384303] mtrr: corrected configuration.
[    0.384615] ACPI: EC: Look up EC in DSDT
[    0.396003] ACPI: Interpreter enabled
[    0.396005] ACPI: (supports S0 S1 S3 S4 S5)
[    0.396027] ACPI: Using IOAPIC for interrupt routing
[    0.396151] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.400127] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.408952] PCI: Using MMCONFIG at e0000000 - efffffff
[    0.416212] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.416212] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.416212] pci 0000:00:06.0: PME# disabled
[    0.416212] PCI: 0000:00:11.0 reg 10 io port: [d000, d007]
[    0.416212] PCI: 0000:00:11.0 reg 14 io port: [c000, c003]
[    0.416212] PCI: 0000:00:11.0 reg 18 io port: [b000, b007]
[    0.416212] PCI: 0000:00:11.0 reg 1c io port: [a000, a003]
[    0.416212] PCI: 0000:00:11.0 reg 20 io port: [9000, 900f]
[    0.416212] PCI: 0000:00:11.0 reg 24 32bit mmio: [fe7ff800, fe7ffbff]
[    0.416213] pci 0000:00:11.0: set SATA to AHCI mode
[    0.416236] PCI: 0000:00:12.0 reg 10 32bit mmio: [fe7fe000, fe7fefff]
[    0.416289] PCI: 0000:00:12.1 reg 10 32bit mmio: [fe7fd000, fe7fdfff]
[    0.416359] PCI: 0000:00:12.2 reg 10 32bit mmio: [fe7ff000, fe7ff0ff]
[    0.416404] pci 0000:00:12.2: supports D1
[    0.416405] pci 0000:00:12.2: supports D2
[    0.416406] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.416410] pci 0000:00:12.2: PME# disabled
[    0.416433] PCI: 0000:00:13.0 reg 10 32bit mmio: [fe7fc000, fe7fcfff]
[    0.416484] PCI: 0000:00:13.1 reg 10 32bit mmio: [fe7fb000, fe7fbfff]
[    0.416553] PCI: 0000:00:13.2 reg 10 32bit mmio: [fe7fa800, fe7fa8ff]
[    0.416597] pci 0000:00:13.2: supports D1
[    0.416598] pci 0000:00:13.2: supports D2
[    0.416599] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.416603] pci 0000:00:13.2: PME# disabled
[    0.416699] PCI: 0000:00:14.1 reg 10 io port: [0, 7]
[    0.416705] PCI: 0000:00:14.1 reg 14 io port: [0, 3]
[    0.416711] PCI: 0000:00:14.1 reg 18 io port: [0, 7]
[    0.416717] PCI: 0000:00:14.1 reg 1c io port: [0, 3]
[    0.416723] PCI: 0000:00:14.1 reg 20 io port: [ff00, ff0f]
[    0.416778] PCI: 0000:00:14.2 reg 10 64bit mmio: [fe7f4000, fe7f7fff]
[    0.416816] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.416820] pci 0000:00:14.2: PME# disabled
[    0.416911] PCI: 0000:00:14.5 reg 10 32bit mmio: [fe7f9000, fe7f9fff]
[    0.417017] PCI: 0000:01:05.0 reg 10 32bit mmio: [d0000000, dfffffff]
[    0.417020] PCI: 0000:01:05.0 reg 14 io port: [e000, e0ff]
[    0.417023] PCI: 0000:01:05.0 reg 18 32bit mmio: [fe9f0000, fe9fffff]
[    0.417029] PCI: 0000:01:05.0 reg 24 32bit mmio: [fe800000, fe8fffff]
[    0.417038] pci 0000:01:05.0: supports D1
[    0.417039] pci 0000:01:05.0: supports D2
[    0.417054] PCI: 0000:01:05.1 reg 10 32bit mmio: [fe9e8000, fe9ebfff]
[    0.417071] pci 0000:01:05.1: supports D1
[    0.417072] pci 0000:01:05.1: supports D2
[    0.417109] PCI: bridge 0000:00:01.0 io port: [e000, efff]
[    0.417111] PCI: bridge 0000:00:01.0 32bit mmio: [fe800000, fe9fffff]
[    0.417115] PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff]
[    0.417156] PCI: 0000:02:00.0 reg 10 64bit mmio: [feac0000, feafffff]
[    0.417182] PCI: 0000:02:00.0 reg 30 32bit mmio: [feaa0000, feabffff]
[    0.417202] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.417205] pci 0000:02:00.0: PME# disabled
[    0.417246] PCI: bridge 0000:00:06.0 32bit mmio: [fea00000, feafffff]
[    0.417282] PCI: 0000:03:05.0 reg 10 32bit mmio: [febffc00, febffdff]
[    0.417366] pci 0000:00:14.4: transparent bridge
[    0.417372] PCI: bridge 0000:00:14.4 32bit mmio: [feb00000, febfffff]
[    0.417391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.417726] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.417828] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
[    0.417940] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[    0.420168] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.420236] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.420349] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.420461] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.420573] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.420685] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.420802] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 12 14 15) *0, disabled.
[    0.420915] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.420959] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 12, should be 09 [20080609]
[    0.420959] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.424032] pnp: PnP ACPI init
[    0.424037] ACPI: bus type pnp registered
[    0.428355] pnp: PnP ACPI: found 18 devices
[    0.428356] ACPI: ACPI bus type pnp unregistered
[    0.428374] PCI: Using ACPI for IRQ routing
[    0.448035] NET: Registered protocol family 8
[    0.448037] NET: Registered protocol family 20
[    0.448063] NetLabel: Initializing
[    0.448064] NetLabel:  domain hash size = 128
[    0.448065] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.448077] NetLabel:  unlabeled traffic allowed by default
[    0.448120] PCI-DMA: Disabling AGP.
[    0.448267] PCI-DMA: aperture base @ 20000000 size 65536 KB
[    0.448267] PCI-DMA: using GART IOMMU.
[    0.448267] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.448893] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.448899] hpet0: 4 32-bit timers, 14318180 Hz
[    0.452045] Switched to high resolution mode on CPU 0
[    0.452176] tracer: 1286 pages allocated for 65536 entries of 80 bytes
[    0.452179] Switched to high resolution mode on CPU 1
[    0.452181]    actual entries 65586
[    0.452281] AppArmor: AppArmor Filesystem Enabled
[    0.452303] ACPI: RTC can wake from S4
[    0.472040] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.472043] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.472048] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[    0.472050] system 00:0b: ioport range 0x40b-0x40b has been reserved
[    0.472052] system 00:0b: ioport range 0x4d6-0x4d6 has been reserved
[    0.472054] system 00:0b: ioport range 0xc00-0xc01 has been reserved
[    0.472056] system 00:0b: ioport range 0xc14-0xc14 has been reserved
[    0.472058] system 00:0b: ioport range 0xc50-0xc51 has been reserved
[    0.472059] system 00:0b: ioport range 0xc52-0xc52 has been reserved
[    0.472061] system 00:0b: ioport range 0xc6c-0xc6c has been reserved
[    0.472063] system 00:0b: ioport range 0xc6f-0xc6f has been reserved
[    0.472065] system 00:0b: ioport range 0xcd0-0xcd1 has been reserved
[    0.472067] system 00:0b: ioport range 0xcd2-0xcd3 has been reserved
[    0.472069] system 00:0b: ioport range 0xcd4-0xcd5 has been reserved
[    0.472071] system 00:0b: ioport range 0xcd6-0xcd7 has been reserved
[    0.472072] system 00:0b: ioport range 0xcd8-0xcdf has been reserved
[    0.472074] system 00:0b: ioport range 0x800-0x89f has been reserved
[    0.472076] system 00:0b: ioport range 0xb00-0xb3f has been reserved
[    0.472078] system 00:0b: ioport range 0x900-0x90f has been reserved
[    0.472080] system 00:0b: ioport range 0x910-0x91f has been reserved
[    0.472082] system 00:0b: ioport range 0xfe00-0xfefe has been reserved
[    0.472084] system 00:0b: iomem range 0xffb80000-0xffbfffff could not be reserved
[    0.472086] system 00:0b: iomem range 0xfec10000-0xfec1001f has been reserved
[    0.472093] system 00:0f: ioport range 0xe00-0xe0f has been reserved
[    0.472097] system 00:0f: ioport range 0xe80-0xe8f has been reserved
[    0.472099] system 00:0f: ioport range 0xf40-0xf4f has been reserved
[    0.472101] system 00:0f: ioport range 0xa30-0xa3f has been reserved
[    0.472108] system 00:10: iomem range 0xe0000000-0xefffffff has been reserved
[    0.472113] system 00:11: iomem range 0x0-0x9ffff could not be reserved
[    0.472115] system 00:11: iomem range 0xc0000-0xcffff has been reserved
[    0.472117] system 00:11: iomem range 0xe0000-0xfffff could not be reserved
[    0.472119] system 00:11: iomem range 0x100000-0xcfffffff could not be reserved
[    0.472121] system 00:11: iomem range 0xfec00000-0xffffffff could not be reserved
[    0.477403] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.477406] pci 0000:00:01.0:   IO window: 0xe000-0xefff
[    0.477409] pci 0000:00:01.0:   MEM window: 0xfe800000-0xfe9fffff
[    0.477412] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.477415] pci 0000:00:06.0: PCI bridge, secondary bus 0000:02
[    0.477416] pci 0000:00:06.0:   IO window: disabled
[    0.477419] pci 0000:00:06.0:   MEM window: 0xfea00000-0xfeafffff
[    0.477421] pci 0000:00:06.0:   PREFETCH window: disabled
[    0.477425] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
[    0.477426] pci 0000:00:14.4:   IO window: disabled
[    0.477430] pci 0000:00:14.4:   MEM window: 0xfeb00000-0xfebfffff
[    0.477434] pci 0000:00:14.4:   PREFETCH window: disabled
[    0.477453] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.477455] pci 0000:00:06.0: setting latency timer to 64
[    0.477462] bus: 00 index 0 io port: [0, ffff]
[    0.477464] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[    0.477465] bus: 01 index 0 io port: [e000, efff]
[    0.477467] bus: 01 index 1 mmio: [fe800000, fe9fffff]
[    0.477468] bus: 01 index 2 mmio: [d0000000, dfffffff]
[    0.477469] bus: 01 index 3 mmio: [0, 0]
[    0.477471] bus: 02 index 0 mmio: [0, 0]
[    0.477472] bus: 02 index 1 mmio: [fea00000, feafffff]
[    0.477473] bus: 02 index 2 mmio: [0, 0]
[    0.477474] bus: 02 index 3 mmio: [0, 0]
[    0.477475] bus: 03 index 0 mmio: [0, 0]
[    0.477477] bus: 03 index 1 mmio: [feb00000, febfffff]
[    0.477478] bus: 03 index 2 mmio: [0, 0]
[    0.477479] bus: 03 index 3 io port: [0, ffff]
[    0.477480] bus: 03 index 4 mmio: [0, ffffffffffffffff]
[    0.477491] NET: Registered protocol family 2
[    0.516205] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.518028] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.523563] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.524236] TCP: Hash tables configured (established 524288 bind 65536)
[    0.524238] TCP reno registered
[    0.536119] NET: Registered protocol family 1
[    0.536211] checking if image is initramfs... it is
[    1.016095] Freeing initrd memory: 8444k freed
[    1.022563] audit: initializing netlink socket (disabled)
[    1.022576] type=2000 audit(1234139313.020:1): initialized
[    1.026798] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.029363] VFS: Disk quotas dquot_6.5.1
[    1.029444] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.029552] msgmni has been set to 11447
[    1.029658] io scheduler noop registered
[    1.029660] io scheduler anticipatory registered
[    1.029661] io scheduler deadline registered
[    1.029787] io scheduler cfq registered (default)
[    1.029885] pci 0000:01:05.0: Boot video device
[    1.029991] pcieport-driver 0000:00:06.0: setting latency timer to 64
[    1.030011] pcieport-driver 0000:00:06.0: found MSI capability
[    1.030035] pci_express 0000:00:06.0:pcie00: allocate port service
[    1.030085] pci_express 0000:00:06.0:pcie02: allocate port service
[    1.065311] hpet_resources: 0xfed00000 is busy
[    1.065377] Linux agpgart interface v0.103
[    1.065381] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.065534] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.066142] 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.067851] brd: module loaded
[    1.067913] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    1.068218] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.068596] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.068601] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.084714] mice: PS/2 mouse device common for all mice
[    1.084847] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.084872] rtc0: alarms up to one month, y3k, hpet irqs
[    1.084922] cpuidle: using governor ladder
[    1.084923] cpuidle: using governor menu
[    1.085243] TCP cubic registered
[    1.085442] registered taskstats version 1
[    1.085562]   Magic number: 13:571:455
[    1.085716] rtc_cmos 00:05: setting system clock to 2009-02-09 00:28:34 UTC (1234139314)
[    1.085719] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.085720] EDD information not available.
[    1.085751] Freeing unused kernel memory: 540k freed
[    1.086019] Write protecting the kernel read-only data: 4352k
[    1.111328] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    1.228153] fuse init (API version 7.9)
[    1.336285] processor ACPI0007:00: registered as cooling_device0
[    1.336290] ACPI: Processor [P001] (supports 8 throttling states)
[    1.336362] processor ACPI0007:01: registered as cooling_device1
[    1.559309] atl1 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.559317] atl1 0000:02:00.0: setting latency timer to 64
[    1.559337] atl1 0000:02:00.0: version 2.1.3
[    1.571542] No dock devices found.
[    1.584907] SCSI subsystem initialized
[    1.612772] libata version 3.00 loaded.
[    1.613926] usbcore: registered new interface driver usbfs
[    1.613943] usbcore: registered new interface driver hub
[    1.613983] usbcore: registered new device driver usb
[    1.614076] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.614113] pata_acpi 0000:00:14.1: setting latency timer to 64
[    1.615705] scsi0 : pata_atiixp
[    1.630061] scsi1 : pata_atiixp
[    1.631357] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    1.631359] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    1.631731] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.792564] ata1.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.01, max UDMA/66
[    1.808577] ata1.00: configured for UDMA/66
[    1.976632] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GH22NP20 1.01 PQ: 0 ANSI: 5
[    1.976748] ahci 0000:00:11.0: version 3.0
[    1.976765] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.976915] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.976918] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    1.977660] scsi2 : ahci
[    1.978353] scsi3 : ahci
[    1.979038] scsi4 : ahci
[    1.979729] scsi5 : ahci
[    1.979764] ata3: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ff900 irq 2302
[    1.979767] ata4: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ff980 irq 2302
[    1.979770] ata5: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ffa00 irq 2302
[    1.979773] ata6: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ffa80 irq 2302
[    2.460020] ata3: softreset failed (device not ready)
[    2.460024] ata3: failed due to HW bug, retry pmp=0
[    2.624029] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.636289] ata3.00: ATA-7: WDC WD4000AAJS-22TKA0, 12.01C01, max UDMA/133
[    2.636291] ata3.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.637087] ata3.00: configured for UDMA/133
[    2.972033] ata4: SATA link down (SStatus 0 SControl 300)
[    3.308032] ata5: SATA link down (SStatus 0 SControl 300)
[    3.644529] ata6: SATA link down (SStatus 0 SControl 300)
[    3.660107] scsi 2:0:0:0: Direct-Access     ATA      WDC WD4000AAJS-2 12.0 PQ: 0 ANSI: 5
[    3.660205] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.660218] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    3.660253] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
[    3.660285] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe7fe000
[    3.718472] usb usb1: configuration #1 chosen from 1 choice
[    3.718495] hub 1-0:1.0: USB hub found
[    3.718504] hub 1-0:1.0: 3 ports detected
[    3.820168] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.820179] ohci_hcd 0000:00:12.1: OHCI Host Controller
[    3.820198] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 2
[    3.820213] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe7fd000
[    3.878119] usb usb2: configuration #1 chosen from 1 choice
[    3.878140] hub 2-0:1.0: USB hub found
[    3.878149] hub 2-0:1.0: 3 ports detected
[    4.084159] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    4.084171] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    4.084189] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 3
[    4.084213] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[    4.084231] ehci_hcd 0000:00:12.2: debug port 1
[    4.084248] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe7ff000
[    4.096014] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    4.096075] usb usb3: configuration #1 chosen from 1 choice
[    4.096095] hub 3-0:1.0: USB hub found
[    4.096101] hub 3-0:1.0: 6 ports detected
[    4.304144] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    4.304156] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    4.304174] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[    4.304198] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe7fc000
[    4.362149] usb usb4: configuration #1 chosen from 1 choice
[    4.362169] hub 4-0:1.0: USB hub found
[    4.362178] hub 4-0:1.0: 3 ports detected
[    4.465827] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    4.465839] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    4.468113] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 5
[    4.468136] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe7fb000
[    4.526140] usb usb5: configuration #1 chosen from 1 choice
[    4.526164] hub 5-0:1.0: USB hub found
[    4.526174] hub 5-0:1.0: 3 ports detected
[    4.628162] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    4.628174] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    4.628207] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 6
[    4.628233] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[    4.628250] ehci_hcd 0000:00:13.2: debug port 1
[    4.628268] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe7fa800
[    4.680019] usb 2-1: new full speed USB device using ohci_hcd and address 2
[    4.692019] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    4.692134] usb usb6: configuration #1 chosen from 1 choice
[    4.692158] hub 6-0:1.0: USB hub found
[    4.692164] hub 6-0:1.0: 6 ports detected
[    4.797244] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    4.797257] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    4.797281] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[    4.797294] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe7f9000
[    4.855092] usb usb7: configuration #1 chosen from 1 choice
[    4.855638] hub 7-0:1.0: USB hub found
[    4.855647] hub 7-0:1.0: 2 ports detected
[    4.868087] usb 2-1: configuration #1 chosen from 1 choice
[    4.963142] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[    4.963174] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[    4.982105] Driver 'sr' needs updating - please use bus_type methods
[    4.987135] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.987140] Uniform CD-ROM driver Revision: 3.20
[    4.987231] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    5.011501] Driver 'sd' needs updating - please use bus_type methods
[    5.011607] sd 2:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
[    5.011619] sd 2:0:0:0: [sda] Write Protect is off
[    5.011621] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.011639] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.011691] sd 2:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
[    5.011700] sd 2:0:0:0: [sda] Write Protect is off
[    5.011702] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.011718] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.011721]  sda: sda1 < sda5 sda6 > sda2
[    5.032383] sd 2:0:0:0: [sda] Attached SCSI disk
[    5.260606] PM: Starting manual resume from disk
[    5.260609] PM: Resume from partition 8:6
[    5.260610] PM: Checking hibernation image.
[    5.260772] PM: Resume from disk failed.
[    5.304445] kjournald starting.  Commit interval 5 seconds
[    5.304469] EXT3-fs: mounted filesystem with ordered data mode.
[    9.907253] udevd version 124 started
[   10.152624] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   10.178692] shpchp: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0
[   10.178696] shpchp: shpc_init: cannot reserve MMIO region
[   10.178734] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.204686] ACPI: WMI: Mapper loaded
[   10.246289] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[   10.268561] ACPI: Power Button (FF) [PWRF]
[   10.268666] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[   10.296540] ACPI: Power Button (CM) [PWRB]
[   10.685088] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x043D pid 0x0100
[   10.685111] usbcore: registered new interface driver usblp
[   10.719548] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
[   10.719551] ACPI: Device needs an ACPI driver
[   10.719558] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   11.001269] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   11.027494] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   11.063936] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   11.063952] HDA Intel 0000:01:05.1: setting latency timer to 64
[   11.067997] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   11.223069] logips2pp: Detected unknown logitech mouse model 74
[   11.703017] input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input5
[   12.905622] lp: driver loaded but no devices found
[   13.048347] Adding 28322552k swap on /dev/sda6.  Priority:-1 extents:1 across:28322552k
[   13.597170] EXT3 FS on sda5, internal journal
[   14.447233] type=1505 audit(1234139327.668:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4286
[   14.565671] type=1505 audit(1234139327.788:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4291
[   14.565846] type=1505 audit(1234139327.788:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4291
[   14.682375] ip_tables: (C) 2000-2006 Netfilter Core Team
[   15.296198] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
[   15.296219] powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver.
[   15.296241] powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver.
[   16.050982] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   16.187691] ppdev: user-space parallel port driver
[   17.791503] Bluetooth: Core ver 2.13
[   17.792495] NET: Registered protocol family 31
[   17.792498] Bluetooth: HCI device and connection manager initialized
[   17.792514] Bluetooth: HCI socket layer initialized
[   17.801677] Bluetooth: L2CAP ver 2.11
[   17.801683] Bluetooth: L2CAP socket layer initialized
[   17.808127] Bluetooth: SCO (Voice Link) ver 0.6
[   17.808132] Bluetooth: SCO socket layer initialized
[   17.814336] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.814342] Bluetooth: BNEP filters: protocol multicast
[   17.877588] Bridge firewalling registered
[   18.218672] Bluetooth: RFCOMM socket layer initialized
[   18.218925] Bluetooth: RFCOMM TTY layer initialized
[   18.218928] Bluetooth: RFCOMM ver 1.10
[   19.839707] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   22.297022] atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex
[   22.465148] NET: Registered protocol family 17
[   22.978675] hda-intel: Invalid position buffer, using LPIB read method instead.
[   24.560757] NET: Registered protocol family 10
[   24.561874] lo: Disabled Privacy Extensions
[   34.564512] eth0: no IPv6 routers present
carsten@carsten-desktop:~$ 

Kannste dir denken was da falsch läuft ? Ich bin planlos

Das füge ich noch an:

carsten@carsten-desktop:~$ uname -a
Linux carsten-desktop 2.6.27-11-generic #1 SMP Thu Jan 29 19:28:32 UTC 2009 x86_64 GNU/Linux
carsten@carsten-desktop:~$ sudo lsmod | grep -i video
[sudo] password for carsten: 
video                  29204  0 
output                 11776  1 video

carsten@carsten-desktop:~$ sudo lspci | grep -i multimedia
03:05.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
carsten@carsten-desktop:~$ 

Eine Neuinstallation ist eigentlich nur in den seltesten Fällen notwendig...eine Neuinstallation des Kernel reicht meistens...

Arbeite folgendes doch mal ab...

Kernel deinstallieren

sudo apt-get remove --purge linux-image-`uname -r`

sudo apt-get autoremove

Verzeichnis löschen, falls noch vorhanden

sudo rm -R /lib/modules/`uname -r`

Kernel installieren

sudo apt-get install linux-image-`uname -r`

Neustart

sudo reboot

Die Karte neu installieren

Das alte Verzeichnis löschen

sudo rm -R s2-liplianin

und dann weiter mit:

sudo apt-get install mercurial gcc make build-essential linux-headers-`uname -r`

hg clone http://mercurial.intuxication.org/hg/s2-liplianin/

cd s2-liplianin

make

sudo make install

sudo reboot

Überprüfen kannst du das dann mit:

dmesg | grep -i dvb

und falls du Kernel-Updates erhälst und die Karte dann nicht mehr im neuen Kernel vorhanden ist, gehst du so vor:

cd s2-liplianin

sudo make distclean

make clean

make

sudo make install

damit hast du die Informationen in den aktuellen Kernel geschrieben...und am Ende einen Neustart

sudo reboot

Erstmal wieder: VIELEN DANK !!!!

Abarbeiten muss ich erst später. Bis denne

Edit !!!

Irrwitzigerweise fahre ich gerade Ubuntu hoch und jetzt ist auf einmal die TV Karte in Kaffeine !! Musste Ubuntu erst eine Nacht drüber schlafen ? ^^

Unglaublich

Danke nochmal an der Stelle !!

Eine Frage hätte ich da noch:

kaffeine hatte den ffmpeg Codec nachgeladen. Ich finde das das Bild eher kriselig ist. Also unscharf. Habe die Aufnahmen auch mal unter XP nachgeschaut und dort verglichen. Das ergebnis bleibt das die Aufnahme kriselig ist. Kann man Kaffeine nen besseren Codec vorschreiben? Gibts da einen? Habe unter XP ( DVB Dream) den Nvidia Codec genommen (gestochen scharf). Ausserdem zwitschern in Kaffeine die Sender

Hallo,

ich hätte gerne gewußt, ob ich meine Technotrend S2-3200 mit genau dieser Anleitung auch installieren kann,

oder ob ich da einen anderen Treiber einbinden muß. Denn die Karte hat ja auch einen Philips SAA7146 (rev 01) Chip.

sudo apt-get install mercurial gcc make build-essential linux-headers-`uname -r`

hg clone http://mercurial.intuxication.org/hg/s2-liplianin/

cd s2-liplianin

make

sudo make install

sudo reboot 

Überprüfen kannst du das dann mit:

dmesg | grep -i dvb

Ich lese schon eine Woche lang wie ein Verrückter bekomme es aber einfach nicht hin.

Habe schon mal probiert nach eishailiga's Alneitung vom September 2008 19:17 zu installieren:

hg clone http://jusst.de/hg/multiproto

cd multiproto

make

sudo make install

sudo reboot

Wenn ich danach lsmod eigebe wird unter Video nichts angezeigt, ich verzweifele bald.

Muß ich bei linux-headers-uname -r meinen Benutzernamen eingeben, oder so wie es dort steht?.

Bitte helft mir!!!

LG,

Wicky

Sollte gehen. Sind baugleich

Was steht denn da bei dir ? : sudo lspci | grep -i multimedia

Die Befehle kannste genauso kopieren und benutzen.