lsusb:
Bus 002 Device 003: ID 058f:1234 Alcor Micro Corp. Flash Drive
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
dmesg: Ausgabeauszug siehe letzten Zeile:
[ 1771.930502] usb 2-3: USB disconnect, device number 2
[ 1781.196091] usb 2-3: new high-speed USB device number 3 using ehci-pci
[ 1781.330152] usb 2-3: New USB device found, idVendor=058f, idProduct=1234
[ 1781.330160] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1781.330165] usb 2-3: Product: Mass Storage Device
[ 1781.330169] usb 2-3: Manufacturer: Alcor Micro
[ 1781.331067] usb-storage 2-3:1.0: USB Mass Storage device detected
[ 1781.331878] scsi5 : usb-storage 2-3:1.0
[ 1782.333083] scsi 5:0:0:0: Direct-Access Generic USB Flash Disk 7.76 PQ: 0 ANSI: 2
[ 1782.333553] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 1782.339321] sd 5:0:0:0: [sdb] Attached SCSI removable disk
Das klingt doch gar nicht mal so schlecht??????
dmesg: genaue Ausgabe:
[ 0.541370] Scanning for low memory corruption every 60 seconds
[ 0.541650] Initialise module verification
[ 0.541704] audit: initializing netlink socket (disabled)
[ 0.541719] type=2000 audit(1388260734.540:1): initialized
[ 0.574469] bounce pool size: 64 pages
[ 0.574489] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.576140] zbud: loaded
[ 0.576294] VFS: Disk quotas dquot_6.5.2
[ 0.576348] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.576930] fuse init (API version 7.22)
[ 0.577039] msgmni has been set to 7832
[ 0.577602] Key type asymmetric registered
[ 0.577605] Asymmetric key parser 'x509' registered
[ 0.577651] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.577689] io scheduler noop registered
[ 0.577691] io scheduler deadline registered (default)
[ 0.577719] io scheduler cfq registered
[ 0.577866] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.577984] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.578098] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.578231] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.578237] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.578259] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.578262] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.578267] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.578291] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.578294] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.578299] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.578313] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.578354] pciehp 0000:00:1c.5:pcie04: HPC vendor_id 8086 device_id 294a ss_vid 8086 ss_did 294a
[ 0.578388] pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded
[ 0.578394] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.578465] intel_idle: does not run on family 6 model 23
[ 0.578610] ACPI: AC Adapter [AC0] (on-line)
[ 0.578732] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 0.578739] ACPI: Sleep Button [SLPB]
[ 0.578782] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.582762] ACPI: Lid Switch [LID]
[ 0.582807] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.582810] ACPI: Power Button [PWRF]
[ 0.582953] ACPI: Requesting acpi_cpufreq
[ 0.583493] Monitor-Mwait will be used to enter C-1 state
[ 0.583500] Monitor-Mwait will be used to enter C-2 state
[ 0.583504] Monitor-Mwait will be used to enter C-3 state
[ 0.583507] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.583519] ACPI: acpi_idle registered with cpuidle
[ 0.588281] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.588286] ACPI: Thermal Zone [THRM] (32 C)
[ 0.588335] GHES: HEST is not enabled!
[ 0.588437] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.590913] Linux agpgart interface v0.103
[ 0.590997] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 0.591060] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.591505] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.591733] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.593893] brd: module loaded
[ 0.595091] loop: module loaded
[ 0.595594] libphy: Fixed MDIO Bus: probed
[ 0.595716] tun: Universal TUN/TAP device driver, 1.6
[ 0.595718] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.595830] PPP generic driver version 2.4.2
[ 0.595883] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.595885] ehci-pci: EHCI PCI platform driver
[ 0.596073] ehci-pci 0000:00:1a.7: setting latency timer to 64
[ 0.596088] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.596096] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.596119] ehci-pci 0000:00:1a.7: debug port 1
[ 0.600049] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 0.600074] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe9fbc00
[ 0.612022] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.612093] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.612096] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.612098] usb usb1: Product: EHCI Host Controller
[ 0.612101] usb usb1: Manufacturer: Linux 3.11.0-14-generic ehci_hcd
[ 0.612103] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.612267] hub 1-0:1.0: USB hub found
[ 0.612273] hub 1-0:1.0: 6 ports detected
[ 0.614036] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 0.614046] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.614055] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.614070] ehci-pci 0000:00:1d.7: debug port 1
[ 0.617974] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.617997] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe9fb800
[ 0.620204] ACPI: Battery Slot [BAT0] (battery present)
[ 0.628018] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.628053] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.628056] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.628058] usb usb2: Product: EHCI Host Controller
[ 0.628061] usb usb2: Manufacturer: Linux 3.11.0-14-generic ehci_hcd
[ 0.628063] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.628187] hub 2-0:1.0: USB hub found
[ 0.628192] hub 2-0:1.0: 6 ports detected
[ 0.629120] ehci-platform: EHCI generic platform driver
[ 0.629133] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.629134] ohci-platform: OHCI generic platform driver
[ 0.629141] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.629219] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.629224] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.629230] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.629271] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880
[ 0.629311] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.629314] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.629316] usb usb3: Product: UHCI Host Controller
[ 0.629319] usb usb3: Manufacturer: Linux 3.11.0-14-generic uhci_hcd
[ 0.629321] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.629439] hub 3-0:1.0: USB hub found
[ 0.629444] hub 3-0:1.0: 2 ports detected
[ 0.629833] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.629838] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.629844] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.629882] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800
[ 0.629919] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.629922] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.629924] usb usb4: Product: UHCI Host Controller
[ 0.629926] usb usb4: Manufacturer: Linux 3.11.0-14-generic uhci_hcd
[ 0.629929] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.630032] hub 4-0:1.0: USB hub found
[ 0.630037] hub 4-0:1.0: 2 ports detected
[ 0.630421] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.630425] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.630431] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.630470] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000d480
[ 0.630511] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.630514] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.630516] usb usb5: Product: UHCI Host Controller
[ 0.630518] usb usb5: Manufacturer: Linux 3.11.0-14-generic uhci_hcd
[ 0.630520] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.630624] hub 5-0:1.0: USB hub found
[ 0.630629] hub 5-0:1.0: 2 ports detected
[ 0.631017] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.631021] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.631027] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.631056] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 0.631095] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.631098] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.631100] usb usb6: Product: UHCI Host Controller
[ 0.631102] usb usb6: Manufacturer: Linux 3.11.0-14-generic uhci_hcd
[ 0.631104] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.631207] hub 6-0:1.0: USB hub found
[ 0.631212] hub 6-0:1.0: 2 ports detected
[ 0.631604] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.631608] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.631614] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.631642] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080
[ 0.631679] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.631682] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.631684] usb usb7: Product: UHCI Host Controller
[ 0.631687] usb usb7: Manufacturer: Linux 3.11.0-14-generic uhci_hcd
[ 0.631689] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.631794] hub 7-0:1.0: USB hub found
[ 0.631799] hub 7-0:1.0: 2 ports detected
[ 0.632212] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.632217] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.632223] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.632252] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[ 0.632290] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.632293] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.632295] usb usb8: Product: UHCI Host Controller
[ 0.632297] usb usb8: Manufacturer: Linux 3.11.0-14-generic uhci_hcd
[ 0.632300] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.632409] hub 8-0:1.0: USB hub found
[ 0.632414] hub 8-0:1.0: 2 ports detected
[ 0.632826] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.636794] i8042: Detected active multiplexing controller, rev 1.1
[ 0.638828] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.638835] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.638862] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.638884] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.638904] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.639041] mousedev: PS/2 mouse device common for all mice
[ 0.639225] rtc_cmos 00:02: RTC can wake from S4
[ 0.639383] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.639415] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.639492] device-mapper: uevent: version 1.0.3
[ 0.639561] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 0.639606] cpuidle: using governor ladder
[ 0.639659] cpuidle: using governor menu
[ 0.639672] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.639764] TCP: cubic registered
[ 0.639873] NET: Registered protocol family 10
[ 0.640112] NET: Registered protocol family 17
[ 0.640124] Key type dns_resolver registered
[ 0.640384] PM: Hibernation image not present or could not be loaded.
[ 0.640389] Loading module verification certificates
[ 0.641544] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 4f57df1a3429640d83ffde722907e1377213486f'
[ 0.641560] registered taskstats version 1
[ 0.644503] Key type trusted registered
[ 0.646905] Key type encrypted registered
[ 0.649383] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.649809] Magic number: 9:600:1002
[ 0.649876] i8042 aux 00:04: hash matches
[ 0.649970] rtc_cmos 00:02: setting system clock to 2013-12-28 19:58:55 UTC (1388260735)
[ 0.650593] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.650596] EDD information not available.
[ 0.652212] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
[ 0.652218] Write protecting the kernel read-only data: 12288k
[ 0.655405] Freeing unused kernel memory: 1036K (ffff8800016fd000 - ffff880001800000)
[ 0.657808] Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
[ 0.673987] systemd-udevd[100]: starting version 204
[ 0.679543] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.724813] libahci: module verification failed: signature and/or required key missing - tainting kernel
[ 0.725550] ahci 0000:00:1f.2: version 3.0
[ 0.725687] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.725729] ahci: SSS flag set, parallel bus scan disabled
[ 0.725758] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.725762] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 0.725768] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.732611] scsi0 : ahci
[ 0.732724] scsi1 : ahci
[ 0.734479] scsi2 : ahci
[ 0.734590] scsi3 : ahci
[ 0.734686] ata1: SATA max UDMA/133 abar m2048@0xfe9fb000 port 0xfe9fb100 irq 43
[ 0.734690] ata2: SATA max UDMA/133 abar m2048@0xfe9fb000 port 0xfe9fb180 irq 43
[ 0.734692] ata3: DUMMY
[ 0.734693] ata4: DUMMY
[ 0.924059] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 1.052064] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.053425] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.053561] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.053564] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.054938] ata1.00: ATA-8: WDC WD3200BEVT-80A0RT0, 01.01A01, max UDMA/133
[ 1.054941] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.056328] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.056454] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.056457] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.057740] ata1.00: configured for UDMA/133
[ 1.057910] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-8 01.0 PQ: 0 ANSI: 5
[ 1.058148] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.058152] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.058252] sd 0:0:0:0: [sda] Write Protect is off
[ 1.058256] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.058299] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.100510] usb 1-3: New USB device found, idVendor=04f2, idProduct=b071
[ 1.100514] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.100517] usb 1-3: Product: CNF7129
[ 1.100519] usb 1-3: Manufacturer: Chicony Electronics Co., Ltd.
[ 1.100521] usb 1-3: SerialNumber: SN0001
[ 1.132829] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 1.133499] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.212063] usb 2-3: new high-speed USB device number 2 using ehci-pci
[ 1.346105] usb 2-3: New USB device found, idVendor=058f, idProduct=1234
[ 1.346109] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.346111] usb 2-3: Product: Mass Storage Device
[ 1.346114] usb 2-3: Manufacturer: Alcor Micro
[ 1.347672] usb-storage 2-3:1.0: USB Mass Storage device detected
[ 1.347771] scsi4 : usb-storage 2-3:1.0
[ 1.347861] usbcore: registered new interface driver usb-storage
[ 1.376052] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.379355] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.379359] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.381633] ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, AS02, max UDMA/100
[ 1.385372] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.385375] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.387618] ata2.00: configured for UDMA/100
[ 1.392722] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT30N AS02 PQ: 0 ANSI: 5
[ 1.396787] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.396790] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.396930] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.397026] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.344865] scsi 4:0:0:0: Direct-Access Generic USB Flash Disk 7.76 PQ: 0 ANSI: 2
[ 2.345156] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 2.347486] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 3.352143] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[ 3.352148] EXT4-fs (sda5): write access will be enabled during recovery
[ 5.205414] EXT4-fs (sda5): recovery complete
[ 5.226834] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 7.244470] Adding 4157436k swap on /dev/sda6. Priority:-1 extents:1 across:4157436k FS
[ 8.609237] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.040686] systemd-udevd[277]: starting version 204
[ 10.004895] lp: driver loaded but no devices found
[ 11.111486] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 11.733040] asus_laptop: Asus Laptop Support version 0.42
[ 11.733192] asus_laptop: K50IJ model detected
[ 11.733651] asus_laptop: Backlight controlled by ACPI video driver
[ 11.733713] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input4
[ 11.748207] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[ 11.748217] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.748221] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 11.748226] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.748227] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 11.748231] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.748233] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 11.780726] cfg80211: Calling CRDA to update world regulatory domain
[ 11.873205] [drm] Initialized drm 1.1.0 20060810
[ 11.919405] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 12.195394] [drm] Memory usable by graphics device = 2048M
[ 12.195405] i915 0000:00:02.0: setting latency timer to 64
[ 12.216603] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 12.216616] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 12.216617] [drm] Driver supports precise vblank timestamp query.
[ 12.216685] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 12.400052] [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
[ 12.454038] fbcon: inteldrmfb (fb0) is primary device
[ 12.618580] psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040101)
[ 12.656918] psmouse serio4: elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
[ 12.800148] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input5
[ 12.817194] Linux video capture interface: v2.00
[ 13.071820] ath: EEPROM regdomain: 0x60
[ 13.071821] ath: EEPROM indicates we should expect a direct regpair map
[ 13.071823] ath: Country alpha2 being used: 00
[ 13.071824] ath: Regpair used: 0x60
[ 13.109718] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[ 13.133041] input: CNF7129 as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input6
[ 13.133206] usbcore: registered new interface driver uvcvideo
[ 13.133207] USB Video Class driver (1.1.1)
[ 13.147300] Console: switching to colour frame buffer device 170x48
[ 13.150421] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 13.150423] i915 0000:00:02.0: registered panic notifier
[ 13.154252] acpi device:38: registered as cooling_device2
[ 13.154303] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 13.154391] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 13.154543] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 13.156055] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 13.197177] autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:speaker
[ 13.197182] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 13.197184] hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 13.197185] mono: mono_out=0x0
[ 13.197187] inputs:
[ 13.197189] Internal Mic=0x1e
[ 13.197191] Mic=0x1a
[ 13.201121] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 13.201243] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 13.205626] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 13.207017] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900107e0000, irq=17
[ 13.243774] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[ 13.311856] type=1400 audit(1388257148.154:2): apparmor="STATUS" operation="profile_load" parent=419 profile="unconfined" name="/sbin/dhclient" pid=420 comm="apparmor_parser"
[ 13.311866] type=1400 audit(1388257148.154:3): apparmor="STATUS" operation="profile_load" parent=419 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=420 comm="apparmor_parser"
[ 13.311872] type=1400 audit(1388257148.154:4): apparmor="STATUS" operation="profile_load" parent=419 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=420 comm="apparmor_parser"
[ 13.311883] type=1400 audit(1388257148.154:5): apparmor="STATUS" operation="profile_replace" parent=403 profile="unconfined" name="/sbin/dhclient" pid=407 comm="apparmor_parser"
[ 13.311893] type=1400 audit(1388257148.154:6): apparmor="STATUS" operation="profile_replace" parent=403 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=407 comm="apparmor_parser"
[ 13.311899] type=1400 audit(1388257148.154:7): apparmor="STATUS" operation="profile_replace" parent=403 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=407 comm="apparmor_parser"
[ 13.312534] type=1400 audit(1388257148.158:8): apparmor="STATUS" operation="profile_replace" parent=419 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=420 comm="apparmor_parser"
[ 13.312543] type=1400 audit(1388257148.158:9): apparmor="STATUS" operation="profile_replace" parent=419 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=420 comm="apparmor_parser"
[ 13.312552] type=1400 audit(1388257148.158:10): apparmor="STATUS" operation="profile_replace" parent=403 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=407 comm="apparmor_parser"
[ 13.312559] type=1400 audit(1388257148.158:11): apparmor="STATUS" operation="profile_replace" parent=403 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=407 comm="apparmor_parser"
[ 13.328140] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 14.711611] cfg80211: World regulatory domain updated:
[ 14.711616] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.711619] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.711621] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.711623] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.711625] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.711627] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.903766] init: failsafe main process (499) killed by TERM signal
[ 15.470801] init: avahi-cups-reload main process (612) terminated with status 1
[ 15.498497] ppdev: user-space parallel port driver
[ 15.869100] Bluetooth: Core ver 2.16
[ 15.869140] NET: Registered protocol family 31
[ 15.869142] Bluetooth: HCI device and connection manager initialized
[ 15.869578] Bluetooth: HCI socket layer initialized
[ 15.869586] Bluetooth: L2CAP socket layer initialized
[ 15.869597] Bluetooth: SCO socket layer initialized
[ 16.120664] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.120670] Bluetooth: BNEP filters: protocol multicast
[ 16.120683] Bluetooth: BNEP socket layer initialized
[ 16.153622] Bluetooth: RFCOMM TTY layer initialized
[ 16.153641] Bluetooth: RFCOMM socket layer initialized
[ 16.153643] Bluetooth: RFCOMM ver 1.11
[ 19.846327] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.846690] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.850478] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 19.850895] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 20.354565] audit_printk_skb: 15 callbacks suppressed
[ 20.354569] type=1400 audit(1388257155.202:17): apparmor="STATUS" operation="profile_load" parent=703 profile="unconfined" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=708 comm="apparmor_parser"
[ 20.354577] type=1400 audit(1388257155.202:18): apparmor="STATUS" operation="profile_load" parent=703 profile="unconfined" name="chromium_browser" pid=708 comm="apparmor_parser"
[ 20.355076] type=1400 audit(1388257155.202:19): apparmor="STATUS" operation="profile_replace" parent=703 profile="unconfined" name="chromium_browser" pid=708 comm="apparmor_parser"
[ 20.388371] type=1400 audit(1388257155.234:20): apparmor="STATUS" operation="profile_load" parent=703 profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=709 comm="apparmor_parser"
[ 20.388382] type=1400 audit(1388257155.234:21): apparmor="STATUS" operation="profile_load" parent=703 profile="unconfined" name="chromium_browser" pid=709 comm="apparmor_parser"
[ 20.388878] type=1400 audit(1388257155.234:22): apparmor="STATUS" operation="profile_replace" parent=703 profile="unconfined" name="chromium_browser" pid=709 comm="apparmor_parser"
[ 20.392755] type=1400 audit(1388257155.238:23): apparmor="STATUS" operation="profile_replace" parent=703 profile="unconfined" name="/sbin/dhclient" pid=711 comm="apparmor_parser"
[ 20.392767] type=1400 audit(1388257155.238:24): apparmor="STATUS" operation="profile_replace" parent=703 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=711 comm="apparmor_parser"
[ 20.392772] type=1400 audit(1388257155.238:25): apparmor="STATUS" operation="profile_replace" parent=703 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=711 comm="apparmor_parser"
[ 20.393365] type=1400 audit(1388257155.238:26): apparmor="STATUS" operation="profile_replace" parent=703 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=711 comm="apparmor_parser"
[ 22.592794] wlan0: authenticate with 00:1c:4a:a1:43:be
[ 22.633698] wlan0: send auth to 00:1c:4a:a1:43:be (try 1/3)
[ 22.636004] wlan0: authenticated
[ 22.640094] wlan0: associate with 00:1c:4a:a1:43:be (try 1/3)
[ 22.645812] wlan0: RX AssocResp from 00:1c:4a:a1:43:be (capab=0x411 status=0 aid=3)
[ 22.646025] wlan0: associated
[ 22.646064] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 979.611086] perf samples too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 1771.930502] usb 2-3: USB disconnect, device number 2
[ 1781.196091] usb 2-3: new high-speed USB device number 3 using ehci-pci
[ 1781.330152] usb 2-3: New USB device found, idVendor=058f, idProduct=1234
[ 1781.330160] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1781.330165] usb 2-3: Product: Mass Storage Device
[ 1781.330169] usb 2-3: Manufacturer: Alcor Micro
[ 1781.331067] usb-storage 2-3:1.0: USB Mass Storage device detected
[ 1781.331878] scsi5 : usb-storage 2-3:1.0
[ 1782.333083] scsi 5:0:0:0: Direct-Access Generic USB Flash Disk 7.76 PQ: 0 ANSI: 2
[ 1782.333553] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 1782.339321] sd 5:0:0:0: [sdb] Attached SCSI removable disk
