Hallo zusammen,

ich habe einen Rechner, an dem seit einiger Zeit hin und wieder die USB 2.0 Ports (alle 6 zusammen) im laufenden Betrieb crashen. Danach funktionieren nur noch die 4 USB 3.0 Ports. Daher vermute ich, dass der Treiber des Host-Controllers abstürzt.

Bisher habe ich versucht die Module ehci_hcd und uhci_hcd zu entladen und wieder neu zu laden:

1
2

sudo rmmod ehci_hcd
sudo rmmod uhci_hcd

Leider ist das entladen jedoch nicht möglich:

1

rmmod: ERROR: Module ehci_hcd is builtin.

lsmod gibt folgendes aus:

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59

Module                  Size  Used by
bnep                   19624  2 
rfcomm                 69160  0 
bluetooth             391136  10 bnep,rfcomm
joydev                 17381  0 
tda18212dd             17180  2 
cxd2843                26800  2 
x86_pkg_temp_thermal    14205  0 
intel_powerclamp       14705  0 
coretemp               13435  0 
kvm_intel             143187  0 
kvm                   455843  1 kvm_intel
crct10dif_pclmul       14289  0 
crc32_pclmul           13113  0 
ghash_clmulni_intel    13216  0 
cryptd                 20359  1 ghash_clmulni_intel
serio_raw              13462  0 
snd_hda_codec_realtek    65812  1 
snd_hda_codec_hdmi     46368  1 
lpc_ich                21080  0 
snd_hda_intel          56531  7 
snd_hda_codec         193017  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep              13602  1 snd_hda_codec
snd_pcm               102099  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
intel_smartconnect     12619  0 
snd_page_alloc         18710  2 snd_pcm,snd_hda_intel
snd_seq_midi           13324  0 
snd_seq_midi_event     14899  1 snd_seq_midi
snd_rawmidi            30144  1 snd_seq_midi
snd_seq                61560  2 snd_seq_midi_event,snd_seq_midi
ddbridge               84631  47 
cxd2099                17412  1 ddbridge
dvb_core              126586  1 ddbridge
snd_seq_device         14497  3 snd_seq,snd_rawmidi,snd_seq_midi
mac_hid                13205  0                                            
snd_timer              29482  2 snd_pcm,snd_seq                            
mei_me                 18627  0                                            
mei                    82276  1 mei_me                                     
snd                    69322  24 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
soundcore              12680  1 snd
shpchp                 37032  0 
parport_pc             32701  1 
ppdev                  17671  0 
lp                     17759  0 
parport                42348  3 lp,ppdev,parport_pc
hid_generic            12548  0 
usbhid                 52659  0 
hid                   106148  2 hid_generic,usbhid
usb_storage            62209  0 
psmouse               106692  0 
ahci                   34091  4 
libahci                32716  1 ahci
i915                  788212  7 
video                  19476  1 i915
alx                    32452  0 
i2c_algo_bit           13413  1 i915
drm_kms_helper         55071  1 i915
mdio                   13807  1 alx
drm                   303102  6 i915,drm_kms_helper

Hat jemand eine Idee, wie ich das Problem lösen kann?

Vielen Dank im Voraus

Schau mal bitte ob du in deinem Bios eine Option IOMMU hast. Prüf mal ob die Einstellung Enable oder Unable ist.

Was du auch versuchen kannst:

sudo gedit /etc/default/grub 

dann die zeile

GRUB_CMDLINE_LINUX=""

durch die Zeile

GRUB_CMDLINE_LINUX="iommu=soft"

ersetzen.

Dann noch

sudo update-grub 

Jetzt neustarten und schauen ob das Problem weiter besteht.

Hallo beLi3VeR,

leider bringt mich dieser Ansatz nicht weiter. In dem betreffenden PC ist ein Intel G3220 drin. Dieser unterstützt jedoch kein VT-d, was die entsprechende Implementierung Intels von IOMMU ist.

Dennoch vielen Dank.

t_z_web schrieb:

Hallo beLi3VeR,

leider bringt mich dieser Ansatz nicht weiter. In dem betreffenden PC ist ein Intel G3220 drin. Dieser unterstützt jedoch kein VT-d, was die entsprechende Implementierung Intels von IOMMU ist.

Dennoch vielen Dank.

Ok, dann bringt uns das nicht weiter. Poste bitte mal deine Ausgabe von

dmesg 

Dies ist die Ausgabe von dmesg bei mir:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-68-generic (buildd@lgw01-46) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #111-Ubuntu SMP Fri Nov 6 18:17:06 UTC 2015 (Ubuntu 3.13.0-68.111-generic 3.13.11-ckt27)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-68-generic root=UUID=e05b32a8-f99c-462f-a528-bbb6dde1195b ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bacc3fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bacc4000-0x00000000baccafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000baccb000-0x00000000bb414fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb415000-0x00000000bb645fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb646000-0x00000000cc36ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cc370000-0x00000000cc83afff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cc83b000-0x00000000cc87bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cc87c000-0x00000000cc922fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cc923000-0x00000000ccffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ccfff000-0x00000000ccffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf800000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./H81M, BIOS P1.20 09/09/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x11f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7F00000000 write-back
[    0.000000]   1 base 0100000000 mask 7FE0000000 write-back
[    0.000000]   2 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   3 base 00D0000000 mask 7FF0000000 uncachable
[    0.000000]   4 base 00CF800000 mask 7FFF800000 uncachable
[    0.000000]   5 base 011F800000 mask 7FFF800000 uncachable
[    0.000000]   6 base 011F600000 mask 7FFFE00000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 4GB, type WB
[    0.000000] reg 1, base: 4GB, range: 512MB, type WB
[    0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[    0.000000] reg 3, base: 3328MB, range: 256MB, type UC
[    0.000000] reg 4, base: 3320MB, range: 8MB, type UC
[    0.000000] reg 5, base: 4600MB, range: 8MB, type UC
[    0.000000] reg 6, base: 4598MB, range: 2MB, type UC
[    0.000000] total RAM covered: 3822M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 16M         num_reg: 7      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
[    0.000000] reg 3, base: 3320MB, range: 8MB, type UC
[    0.000000] reg 4, base: 4GB, range: 512MB, type WB
[    0.000000] reg 5, base: 4598MB, range: 2MB, type UC
[    0.000000] reg 6, base: 4600MB, range: 8MB, type UC
[    0.000000] e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcd000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd800-0x000fd80f] mapped at [ffff8800000fd800]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[    0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[    0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11f400000-0x11f5fffff]
[    0.000000]  [mem 0x11f400000-0x11f5fffff] page 2M
[    0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11c000000-0x11f3fffff]
[    0.000000]  [mem 0x11c000000-0x11f3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[    0.000000]  [mem 0x100000000-0x11bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbacc3fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xbabfffff] page 2M
[    0.000000]  [mem 0xbac00000-0xbacc3fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbaccb000-0xbb414fff]
[    0.000000]  [mem 0xbaccb000-0xbadfffff] page 4k
[    0.000000]  [mem 0xbae00000-0xbb3fffff] page 2M
[    0.000000]  [mem 0xbb400000-0xbb414fff] page 4k
[    0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbb646000-0xcc36ffff]
[    0.000000]  [mem 0xbb646000-0xbb7fffff] page 4k
[    0.000000]  [mem 0xbb800000-0xcc1fffff] page 2M
[    0.000000]  [mem 0xcc200000-0xcc36ffff] page 4k
[    0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xcc83b000-0xcc87bfff]
[    0.000000]  [mem 0xcc83b000-0xcc87bfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xccfff000-0xccffffff]
[    0.000000]  [mem 0xccfff000-0xccffffff] page 4k
[    0.000000] RAMDISK: [mem 0x34b46000-0x3659afff]
[    0.000000] ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 00000000cc8fe080 000084 (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000cc908bd0 00010C (v05 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 00000000cc8fe1a0 00AA2B (v02 ALASKA    A M I 00000120 INTL 20091112)
[    0.000000] ACPI: FACS 00000000cc921080 000040
[    0.000000] ACPI: APIC 00000000cc908ce0 000062 (v03 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 00000000cc908d48 000044 (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 00000000cc908d90 000539 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000cc9092d0 000AD8 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000cc909da8 0001C7 (v01  PmRef LakeTiny 00003000 INTL 20051117)
[    0.000000] ACPI: MCFG 00000000cc909f70 00003C (v01 ALASKA    A M I 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000cc909fb0 000038 (v01 ALASKA    A M I 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 00000000cc909fe8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 00000000cc90a358 003294 (v01 SaSsdt  SaSsdt  00003000 INTL 20091112)
[    0.000000] ACPI: AAFT 00000000cc90d5f0 0002BB (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000cc90d8b0 000803 (v01 Intel_ IsctTabl 00001000 INTL 20091112)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11f5fffff]
[    0.000000]   NODE_DATA [mem 0x11f5f5000-0x11f5f9fff]
[    0.000000]  [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b000000-ffff88011ebfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x11f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0xbacc3fff]
[    0.000000]   node   0: [mem 0xbaccb000-0xbb414fff]
[    0.000000]   node   0: [mem 0xbb646000-0xcc36ffff]
[    0.000000]   node   0: [mem 0xcc83b000-0xcc87bfff]
[    0.000000]   node   0: [mem 0xccfff000-0xccffffff]
[    0.000000]   node   0: [mem 0x100000000-0x11f5fffff]
[    0.000000] On node 0 totalpages: 964374
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12998 pages used for memmap
[    0.000000]   DMA32 zone: 831866 pages, LIFO batch:31
[    0.000000]   Normal zone: 2008 pages used for memmap
[    0.000000]   Normal zone: 128512 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbacc4000-0xbaccafff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb415000-0xbb645fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcc370000-0xcc83afff]
[    0.000000] PM: Registered nosave memory: [mem 0xcc87c000-0xcc922fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcc923000-0xccffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xcd000000-0xcf7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011f200000 s81536 r8192 d20864 u1048576
[    0.000000] pcpu-alloc: s81536 r8192 d20864 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 949283
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-68-generic root=UUID=e05b32a8-f99c-462f-a528-bbb6dde1195b ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3686156K/3857496K available (7396K kernel code, 1146K rwdata, 3416K rodata, 1336K init, 1448K bss, 171340K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.000000]  Offload RCU callbacks from all CPUs
[    0.000000]  Offload RCU callbacks from CPUs: 0-1.
[    0.000000] NR_IRQS:16640 nr_irqs:512 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 15728640 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2999.012 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5998.02 BogoMIPS (lpj=11996048)
[    0.000004] pid_max: default: 32768 minimum: 301
[    0.000022] Security Framework initialized
[    0.000034] AppArmor: AppArmor initialized
[    0.000035] Yama: becoming mindful.
[    0.000250] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000863] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001131] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.001137] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.001275] Initializing cgroup subsys memory
[    0.001278] Initializing cgroup subsys devices
[    0.001280] Initializing cgroup subsys freezer
[    0.001281] Initializing cgroup subsys blkio
[    0.001282] Initializing cgroup subsys perf_event
[    0.001283] Initializing cgroup subsys hugetlb
[    0.001300] CPU: Physical Processor ID: 0
[    0.001301] CPU: Processor Core ID: 0
[    0.001304] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.001304] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.002086] mce: CPU supports 7 MCE banks
[    0.002095] CPU0: Thermal monitoring enabled (TM1)
[    0.002101] process: using mwait in idle threads
[    0.002104] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.002104] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
[    0.002104] tlb_flushall_shift: 6
[    0.002190] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[    0.002987] ACPI: Core revision 20131115
[    0.008595] ACPI: All ACPI Tables successfully acquired
[    0.010745] ftrace: allocating 28593 entries in 112 pages
[    0.020578] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.060210] smpboot: CPU0: Intel(R) Pentium(R) CPU G3220 @ 3.00GHz (fam: 06, model: 3c, stepping: 03)
[    0.060216] TSC deadline timer enabled
[    0.060224] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[    0.060229] ... version:                3
[    0.060230] ... bit width:              48
[    0.060231] ... generic registers:      8
[    0.060231] ... value mask:             0000ffffffffffff
[    0.060232] ... max period:             0000ffffffffffff
[    0.060233] ... fixed-purpose events:   3
[    0.060233] ... event mask:             00000007000000ff
[    0.061378] x86: Booting SMP configuration:
[    0.061379] .... node  #0, CPUs:      #1
[    0.075300] x86: Booted up 1 node, 2 CPUs
[    0.075302] smpboot: Total of 2 processors activated (11996.04 BogoMIPS)
[    0.075361] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.076731] devtmpfs: initialized
[    0.078009] EVM: security.selinux
[    0.078010] EVM: security.SMACK64
[    0.078011] EVM: security.ima
[    0.078012] EVM: security.capability
[    0.078041] PM: Registering ACPI NVS region [mem 0xbacc4000-0xbaccafff] (28672 bytes)
[    0.078043] PM: Registering ACPI NVS region [mem 0xcc87c000-0xcc922fff] (684032 bytes)
[    0.078537] pinctrl core: initialized pinctrl subsystem
[    0.078577] regulator-dummy: no parameters
[    0.078602] RTC time: 13:03:04, date: 12/09/15
[    0.078624] NET: Registered protocol family 16
[    0.078685] cpuidle: using governor ladder
[    0.078686] cpuidle: using governor menu
[    0.078712] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.078713] ACPI: bus type PCI registered
[    0.078714] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.078747] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.078749] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.083468] PCI: Using configuration type 1 for base access
[    0.083993] bio: create slab <bio-0> at 0
[    0.084076] ACPI: Added _OSI(Module Device)
[    0.084077] ACPI: Added _OSI(Processor Device)
[    0.084078] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.084079] ACPI: Added _OSI(Processor Aggregator Device)
[    0.086784] ACPI: Executed 1 blocks of module-level executable AML code
[    0.088361] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.092679] ACPI: SSDT 00000000cc830c18 0003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.092981] ACPI: Dynamic OEM Table Load:
[    0.092982] ACPI: SSDT           (null) 0003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.096755] ACPI: SSDT 00000000cc830618 0005AA (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.097102] ACPI: Dynamic OEM Table Load:
[    0.097103] ACPI: SSDT           (null) 0005AA (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.100661] ACPI: SSDT 00000000cc82fd98 000119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.100958] ACPI: Dynamic OEM Table Load:
[    0.100959] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.104836] ACPI: Interpreter enabled
[    0.104841] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.104845] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.104856] ACPI: (supports S0 S3 S4 S5)
[    0.104857] ACPI: Using IOAPIC for interrupt routing
[    0.104896] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.105024] ACPI: No dock devices found.
[    0.111134] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.111138] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.111277] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.111366] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.111367] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.111739] PCI host bridge to bus 0000:00
[    0.111741] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.111742] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.111743] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.111744] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.111745] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.111746] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.111747] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.111748] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.111749] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.111750] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.111751] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[    0.111757] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.111818] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.111843] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.111893] pci 0000:00:02.0: [8086:0402] type 00 class 0x030000
[    0.111901] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.111906] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.111910] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.111966] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.111971] pci 0000:00:03.0: reg 0x10: [mem 0xf0714000-0xf0717fff 64bit]
[    0.112046] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.112062] pci 0000:00:14.0: reg 0x10: [mem 0xf0700000-0xf070ffff 64bit]
[    0.112115] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.112146] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.112168] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.112185] pci 0000:00:16.0: reg 0x10: [mem 0xf071e000-0xf071e00f 64bit]
[    0.112241] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.112299] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.112317] pci 0000:00:1a.0: reg 0x10: [mem 0xf071c000-0xf071c3ff]
[    0.112395] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.112438] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.112460] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.112472] pci 0000:00:1b.0: reg 0x10: [mem 0xf0710000-0xf0713fff 64bit]
[    0.112527] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.112560] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.112578] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.112638] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.112671] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.112690] pci 0000:00:1c.2: [8086:244e] type 01 class 0x060401
[    0.112746] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.112780] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.112798] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[    0.112855] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.112888] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.112915] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.112933] pci 0000:00:1d.0: reg 0x10: [mem 0xf071b000-0xf071b3ff]
[    0.113011] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.113052] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.113074] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
[    0.113212] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[    0.113226] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.113232] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.113238] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.113244] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.113250] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.113256] pci 0000:00:1f.2: reg 0x24: [mem 0xf071a000-0xf071a7ff]
[    0.113288] pci 0000:00:1f.2: PME# supported from D3hot
[    0.113332] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.113344] pci 0000:00:1f.3: reg 0x10: [mem 0xf0719000-0xf07190ff 64bit]
[    0.113361] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.113453] pci 0000:01:00.0: [dd01:0006] type 00 class 0x048000
[    0.113471] pci 0000:01:00.0: reg 0x10: [mem 0xf0600000-0xf060ffff 64bit]
[    0.120642] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.120645] pci 0000:00:01.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.120697] pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330
[    0.120717] pci 0000:02:00.0: reg 0x10: [mem 0xf0500000-0xf0507fff 64bit]
[    0.120813] pci 0000:02:00.0: supports D1 D2
[    0.120814] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.128966] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.128970] pci 0000:00:1c.0:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.129030] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060401
[    0.129126] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.129141] pci 0000:00:1c.2: PCI bridge to [bus 03-04] (subtractive decode)
[    0.129148] pci 0000:00:1c.2:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.129149] pci 0000:00:1c.2:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.129150] pci 0000:00:1c.2:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.129151] pci 0000:00:1c.2:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.129152] pci 0000:00:1c.2:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.129153] pci 0000:00:1c.2:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.129154] pci 0000:00:1c.2:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.129155] pci 0000:00:1c.2:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.129156] pci 0000:00:1c.2:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.129157] pci 0000:00:1c.2:   bridge window [mem 0xdfa00000-0xfeafffff] (subtractive decode)
[    0.129262] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
[    0.129279] pci 0000:03:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.129281] pci 0000:03:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.129282] pci 0000:03:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.129282] pci 0000:03:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.129283] pci 0000:03:00.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.129285] pci 0000:03:00.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.129286] pci 0000:03:00.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.129287] pci 0000:03:00.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.129288] pci 0000:03:00.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.129289] pci 0000:03:00.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.129290] pci 0000:03:00.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.129291] pci 0000:03:00.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.129292] pci 0000:03:00.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.129293] pci 0000:03:00.0:   bridge window [mem 0xdfa00000-0xfeafffff] (subtractive decode)
[    0.129349] pci 0000:05:00.0: [1969:10a1] type 00 class 0x020000
[    0.129371] pci 0000:05:00.0: reg 0x10: [mem 0xf0400000-0xf043ffff 64bit]
[    0.129382] pci 0000:05:00.0: reg 0x18: [io  0xe000-0xe07f]
[    0.129482] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.136975] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    0.136978] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.136980] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.137609] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.137642] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.137673] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.137703] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.137733] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.137763] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.137793] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.137823] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.138083] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.138088] ACPI: \_SB_.PCI0: notify handler is installed
[    0.138131] Found 1 acpi root devices
[    0.138188] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.138189] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.138191] vgaarb: loaded
[    0.138192] vgaarb: bridge control possible 0000:00:02.0
[    0.138292] SCSI subsystem initialized
[    0.138320] libata version 3.00 loaded.
[    0.138335] ACPI: bus type USB registered
[    0.138345] usbcore: registered new interface driver usbfs
[    0.138350] usbcore: registered new interface driver hub
[    0.138365] usbcore: registered new device driver usb
[    0.138419] PCI: Using ACPI for IRQ routing
[    0.139624] PCI: pci_cache_line_size set to 64 bytes
[    0.139663] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.139664] e820: reserve RAM buffer [mem 0xbacc4000-0xbbffffff]
[    0.139665] e820: reserve RAM buffer [mem 0xbb415000-0xbbffffff]
[    0.139666] e820: reserve RAM buffer [mem 0xcc370000-0xcfffffff]
[    0.139667] e820: reserve RAM buffer [mem 0xcc87c000-0xcfffffff]
[    0.139668] e820: reserve RAM buffer [mem 0xcd000000-0xcfffffff]
[    0.139669] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff]
[    0.139719] NetLabel: Initializing
[    0.139720] NetLabel:  domain hash size = 128
[    0.139721] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.139729] NetLabel:  unlabeled traffic allowed by default
[    0.139767] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.139771] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.141792] Switched to clocksource hpet
[    0.144712] AppArmor: AppArmor Filesystem Enabled
[    0.144730] pnp: PnP ACPI init
[    0.144739] ACPI: bus type PNP registered
[    0.144806] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.144809] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.144820] pnp 00:01: [dma 4]
[    0.144827] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.144838] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.144901] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.144970] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.144972] system 00:04: [io  0xffff] has been reserved
[    0.144973] system 00:04: [io  0xffff] has been reserved
[    0.144974] system 00:04: [io  0xffff] has been reserved
[    0.144975] system 00:04: [io  0x1c00-0x1cfe] has been reserved
[    0.144976] system 00:04: [io  0x1d00-0x1dfe] has been reserved
[    0.144977] system 00:04: [io  0x1e00-0x1efe] has been reserved
[    0.144978] system 00:04: [io  0x1f00-0x1ffe] has been reserved
[    0.144980] system 00:04: [io  0x1800-0x18fe] could not be reserved
[    0.144981] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.144982] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.145000] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.145026] system 00:06: [io  0x1854-0x1857] has been reserved
[    0.145028] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.145071] system 00:07: [io  0x0290-0x029f] has been reserved
[    0.145073] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.145255] pnp 00:08: [dma 3]
[    0.145316] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.145433] system 00:09: [io  0x04d0-0x04d1] has been reserved
[    0.145435] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.145448] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.145539] pnp 00:0b: [dma 0 disabled]
[    0.145565] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.145865] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.145866] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.145868] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.145869] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.145870] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.145871] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.145873] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.145874] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.145875] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[    0.145876] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.145877] system 00:0c: [mem 0xf7fef000-0xf7feffff] has been reserved
[    0.145880] system 00:0c: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[    0.145881] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.146050] pnp: PnP ACPI: found 13 devices
[    0.146051] ACPI: bus type PNP unregistered
[    0.151612] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.151615] pci 0000:00:01.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.151619] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.151622] pci 0000:00:1c.0:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.151628] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.151644] pci 0000:00:1c.2: PCI bridge to [bus 03-04]
[    0.151652] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    0.151654] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.151658] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.151664] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.151665] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.151666] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.151667] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.151668] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.151669] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.151670] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    0.151671] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    0.151672] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    0.151673] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[    0.151675] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff]
[    0.151676] pci_bus 0000:02: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.151677] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.151678] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.151679] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.151680] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.151681] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.151682] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.151683] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff]
[    0.151684] pci_bus 0000:03: resource 11 [mem 0x000e0000-0x000e3fff]
[    0.151685] pci_bus 0000:03: resource 12 [mem 0x000e4000-0x000e7fff]
[    0.151686] pci_bus 0000:03: resource 13 [mem 0xdfa00000-0xfeafffff]
[    0.151687] pci_bus 0000:04: resource 8 [io  0x0000-0x0cf7]
[    0.151688] pci_bus 0000:04: resource 9 [io  0x0d00-0xffff]
[    0.151689] pci_bus 0000:04: resource 10 [mem 0x000a0000-0x000bffff]
[    0.151690] pci_bus 0000:04: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.151691] pci_bus 0000:04: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.151692] pci_bus 0000:04: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.151693] pci_bus 0000:04: resource 14 [mem 0x000dc000-0x000dffff]
[    0.151694] pci_bus 0000:04: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.151695] pci_bus 0000:04: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.151696] pci_bus 0000:04: resource 17 [mem 0xdfa00000-0xfeafffff]
[    0.151697] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[    0.151698] pci_bus 0000:05: resource 1 [mem 0xf0400000-0xf04fffff]
[    0.151716] NET: Registered protocol family 2
[    0.151847] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.151902] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.151962] TCP: Hash tables configured (established 32768 bind 32768)
[    0.151974] TCP: reno registered
[    0.151978] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.151991] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.152023] NET: Registered protocol family 1
[    0.152033] pci 0000:00:02.0: Video device with shadowed ROM
[    0.193885] pci 0000:05:00.0: set MSI_INTX_DISABLE_BUG flag
[    0.193888] PCI: CLS 64 bytes, default 64
[    0.193923] Trying to unpack rootfs image as initramfs...
[    0.505423] Freeing initrd memory: 26964K (ffff880034b46000 - ffff88003659b000)
[    0.505427] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.505429] software IO TLB [mem 0xc8370000-0xcc370000] (64MB) mapped at [ffff8800c8370000-ffff8800cc36ffff]
[    0.505544] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x9
[    0.505548] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x9
[    0.505579] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.505580] Scanning for low memory corruption every 60 seconds
[    0.505737] Initialise system trusted keyring
[    0.505769] audit: initializing netlink socket (disabled)
[    0.505776] type=2000 audit(1449666184.508:1): initialized
[    0.525117] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.525761] zbud: loaded
[    0.525859] VFS: Disk quotas dquot_6.5.2
[    0.525882] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.526122] fuse init (API version 7.22)
[    0.526165] msgmni has been set to 7252
[    0.526197] Key type big_key registered
[    0.526399] Key type asymmetric registered
[    0.526401] Asymmetric key parser 'x509' registered
[    0.526418] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.526434] io scheduler noop registered
[    0.526435] io scheduler deadline registered (default)
[    0.526447] io scheduler cfq registered
[    0.526568] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.526701] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.526709] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.526730] vesafb: mode is 1360x768x32, linelength=5440, pages=0
[    0.526730] vesafb: scrolling: redraw
[    0.526732] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.527948] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004780000, using 4096k, total 4096k
[    0.529729] Console: switching to colour frame buffer device 170x48
[    0.531417] fb0: VESA VGA frame buffer device
[    0.531436] intel_idle: MWAIT substates: 0x2120
[    0.531437] intel_idle: v0.4 model 0x3C
[    0.531438] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.531476] ipmi message handler version 39.2
[    0.531525] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.531528] ACPI: Power Button [PWRB]
[    0.531546] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.531548] ACPI: Power Button [PWRF]
[    0.531605] GHES: HEST is not enabled!
[    0.531652] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.552004] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.552794] Linux agpgart interface v0.103
[    0.553481] brd: module loaded
[    0.553828] loop: module loaded
[    0.554014] libphy: Fixed MDIO Bus: probed
[    0.554058] tun: Universal TUN/TAP device driver, 1.6
[    0.554059] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.554083] PPP generic driver version 2.4.2
[    0.554106] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.554108] ehci-pci: EHCI PCI platform driver
[    0.554178] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.554182] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.554192] ehci-pci 0000:00:1a.0: debug port 2
[    0.558090] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.558106] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf071c000
[    0.569255] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.569286] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.569287] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.569288] usb usb1: Product: EHCI Host Controller
[    0.569289] usb usb1: Manufacturer: Linux 3.13.0-68-generic ehci_hcd
[    0.569290] usb usb1: SerialNumber: 0000:00:1a.0
[    0.569405] hub 1-0:1.0: USB hub found
[    0.569409] hub 1-0:1.0: 2 ports detected
[    0.569533] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.569536] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.569546] ehci-pci 0000:00:1d.0: debug port 2
[    0.573450] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.573462] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf071b000
[    0.585265] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.585296] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.585297] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.585298] usb usb2: Product: EHCI Host Controller
[    0.585299] usb usb2: Manufacturer: Linux 3.13.0-68-generic ehci_hcd
[    0.585300] usb usb2: SerialNumber: 0000:00:1d.0
[    0.585410] hub 2-0:1.0: USB hub found
[    0.585414] hub 2-0:1.0: 2 ports detected
[    0.585482] ehci-platform: EHCI generic platform driver
[    0.585487] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.585488] ohci-pci: OHCI PCI platform driver
[    0.585494] ohci-platform: OHCI generic platform driver
[    0.585497] uhci_hcd: USB Universal Host Controller Interface driver
[    0.585566] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.585569] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.585643] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.585657] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[    0.585698] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.585699] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.585700] usb usb3: Product: xHCI Host Controller
[    0.585701] usb usb3: Manufacturer: Linux 3.13.0-68-generic xhci_hcd
[    0.585702] usb usb3: SerialNumber: 0000:00:14.0
[    0.585830] hub 3-0:1.0: USB hub found
[    0.585841] hub 3-0:1.0: 10 ports detected
[    0.586912] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.586914] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.586937] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.586938] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.586939] usb usb4: Product: xHCI Host Controller
[    0.586940] usb usb4: Manufacturer: Linux 3.13.0-68-generic xhci_hcd
[    0.586941] usb usb4: SerialNumber: 0000:00:14.0
[    0.587066] hub 4-0:1.0: USB hub found
[    0.587071] hub 4-0:1.0: 2 ports detected
[    0.593378] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.593382] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 5
[    0.593487] xhci_hcd 0000:02:00.0: irq 42 for MSI/MSI-X
[    0.593542] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    0.593544] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.593545] usb usb5: Product: xHCI Host Controller
[    0.593546] usb usb5: Manufacturer: Linux 3.13.0-68-generic xhci_hcd
[    0.593546] usb usb5: SerialNumber: 0000:02:00.0
[    0.593672] hub 5-0:1.0: USB hub found
[    0.593679] hub 5-0:1.0: 2 ports detected
[    0.593721] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.593724] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 6
[    0.593747] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    0.593748] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.593749] usb usb6: Product: xHCI Host Controller
[    0.593750] usb usb6: Manufacturer: Linux 3.13.0-68-generic xhci_hcd
[    0.593751] usb usb6: SerialNumber: 0000:02:00.0
[    0.593873] hub 6-0:1.0: USB hub found
[    0.593880] hub 6-0:1.0: 2 ports detected
[    0.601350] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.603710] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.603714] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.603865] mousedev: PS/2 mouse device common for all mice
[    0.604150] rtc_cmos 00:05: RTC can wake from S4
[    0.604256] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.604280] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.604318] device-mapper: uevent: version 1.0.3
[    0.604360] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.604363] ledtrig-cpu: registered to indicate activity on CPUs
[    0.604420] TCP: cubic registered
[    0.604468] NET: Registered protocol family 10
[    0.604565] NET: Registered protocol family 17
[    0.604571] Key type dns_resolver registered
[    0.604723] Loading compiled-in X.509 certificates
[    0.605315] Loaded X.509 cert 'Magrathea: Glacier signing key: 45b86d4b283fca0440ec04f3a7a2bc675bf46944'
[    0.605322] registered taskstats version 1
[    0.606677] Key type trusted registered
[    0.608711] Key type encrypted registered
[    0.608713] AppArmor: AppArmor sha1 policy hashing enabled
[    0.608715] IMA: No TPM chip found, activating TPM-bypass!
[    0.608978] regulator-dummy: disabling
[    0.609000]   Magic number: 11:603:78
[    0.609071] rtc_cmos 00:05: setting system clock to 2015-12-09 13:03:05 UTC (1449666185)
[    0.609313] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.609314] EDD information not available.
[    0.609342] PM: Hibernation image not present or could not be loaded.
[    0.609868] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[    0.609869] Write protecting the kernel read-only data: 12288k
[    0.611317] Freeing unused kernel memory: 784K (ffff88000173c000 - ffff880001800000)
[    0.612479] Freeing unused kernel memory: 680K (ffff880001b56000 - ffff880001c00000)
[    0.620320] systemd-udevd[100]: starting version 204
[    0.633768] [drm] Initialized drm 1.1.0 20060810
[    0.645965] [drm] Memory usable by graphics device = 2048M
[    0.645969] checking generic (e0000000 400000) vs hw (e0000000 10000000)
[    0.645970] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    0.645980] Console: switching to colour dummy device 80x25
[    0.647153] alx 0000:05:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [d0:50:99:00:53:37]
[    0.693199] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[    0.693208] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.693209] [drm] Driver supports precise vblank timestamp query.
[    0.693259] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    0.880887] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.013107] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    1.013109] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.013360] hub 1-1:1.0: USB hub found
[    1.013462] hub 1-1:1.0: 4 ports detected
[    1.056743] fbcon: inteldrmfb (fb0) is primary device
[    1.124580] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.248435] Console: switching to colour frame buffer device 170x48
[    1.250318] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.250319] i915 0000:00:02.0: registered panic notifier
[    1.253279] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.253557] acpi device:59: registered as cooling_device2
[    1.253605] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    1.253699] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    1.253715] ahci 0000:00:1f.2: version 3.0
[    1.253791] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    1.253829] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x22 impl SATA mode
[    1.253831] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems
[    1.256759] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    1.256761] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.256907] hub 2-1:1.0: USB hub found
[    1.257032] hub 2-1:1.0: 6 ports detected
[    1.260722] scsi0 : ahci
[    1.260786] scsi1 : ahci
[    1.260823] scsi2 : ahci
[    1.260855] scsi3 : ahci
[    1.260885] scsi4 : ahci
[    1.260915] scsi5 : ahci
[    1.260935] ata1: DUMMY
[    1.260938] ata2: SATA max UDMA/133 abar m2048@0xf071a000 port 0xf071a180 irq 44
[    1.260938] ata3: DUMMY
[    1.260939] ata4: DUMMY
[    1.260940] ata5: DUMMY
[    1.260942] ata6: SATA max UDMA/133 abar m2048@0xf071a000 port 0xf071a380 irq 44
[    1.424201] usb 3-3: new low-speed USB device number 2 using xhci_hcd
[    1.445545] usb 3-3: New USB device found, idVendor=0bc7, idProduct=0006
[    1.445547] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.445548] usb 3-3: Product: USB Receiver
[    1.445549] usb 3-3: Manufacturer: X10 Wireless Technology Inc
[    1.445665] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    1.445668] usb 3-3: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[    1.504099] tsc: Refined TSC clocksource calibration: 2999.129 MHz
[    1.580014] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.580031] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.580622] ata2.00: ATA-8: WDC WD10EZRX-00L4HB0, 01.01A01, max UDMA/133
[    1.580624] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.581331] ata2.00: configured for UDMA/133
[    1.581448] scsi 1:0:0:0: Direct-Access     ATA      WDC WD10EZRX-00L 01.0 PQ: 0 ANSI: 5
[    1.581535] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.581542] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.581544] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    1.581593] sd 1:0:0:0: [sda] Write Protect is off
[    1.581594] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.581601] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.581696] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.581698] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.581699] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.582993] ata6.00: ATAPI: HL-DT-ST DVDRAM GH24NSB0, LM00, max UDMA/133
[    1.584858] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.584860] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.584862] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.585865] ata6.00: configured for UDMA/133
[    1.587901] scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH24NSB0  LM00 PQ: 0 ANSI: 5
[    1.591001] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.591003] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.591069] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.591094] sr 5:0:0:0: Attached scsi generic sg1 type 5
[    1.611964] usb 3-9: new high-speed USB device number 3 using xhci_hcd
[    1.635760] usb 3-9: New USB device found, idVendor=05e3, idProduct=0745
[    1.635763] usb 3-9: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[    1.635764] usb 3-9: Product: USB Storage
[    1.635765] usb 3-9: SerialNumber: 000000000903
[    1.638267] usb-storage 3-9:1.0: USB Mass Storage device detected
[    1.638370] scsi6 : usb-storage 3-9:1.0
[    1.638406] usbcore: registered new interface driver usb-storage
[    1.662910]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    1.663380] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.747792] usb 3-10: new full-speed USB device number 4 using xhci_hcd
[    1.765824] usb 3-10: New USB device found, idVendor=062a, idProduct=4101
[    1.765826] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.765827] usb 3-10: Product: 2.4G Keyboard Mouse
[    1.765828] usb 3-10: Manufacturer: MOSART Semi.
[    1.765953] usb 3-10: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    1.768147] hidraw: raw HID events driver (C) Jiri Kosina
[    1.771715] usbcore: registered new interface driver usbhid
[    1.771716] usbhid: USB HID core driver
[    1.772666] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/input/input6
[    1.772707] hid-generic 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-10/input0
[    1.772845] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.1/input/input7
[    1.772900] hid-generic 0003:062A:4101.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-10/input1
[    2.502961] Switched to clocksource tsc
[    2.635909] scsi 6:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0903 PQ: 0 ANSI: 6
[    2.636076] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    2.638058] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    2.798530] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    2.835666] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    2.835669] EXT4-fs (sda1): write access will be enabled during recovery
[    2.924204] random: nonblocking pool is initialized
[    3.897134] EXT4-fs (sda1): orphan cleanup on readonly fs
[    4.045332] EXT4-fs (sda1): 11 orphan inodes deleted
[    4.045334] EXT4-fs (sda1): recovery complete
[    4.196758] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   11.413078] Adding 9764860k swap on /dev/sda5.  Priority:-1 extents:1 across:9764860k FS
[   11.461900] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.531280] systemd-udevd[314]: starting version 204
[   11.579924] lp: driver loaded but no devices found
[   11.583850] ppdev: user-space parallel port driver
[   11.585555] parport_pc 00:08: reported by Plug and Play ACPI
[   11.585608] parport0: PC-style at 0x378 (0x778), irq 5, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   11.591045] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.604627] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[   11.606698] dvb_core: module verification failed: signature and/or  required key missing - tainting kernel
[   11.607435] Digital Devices PCIE bridge driver 0.9.19, Copyright (C) 2010-15 Digital Devices GmbH
[   11.620549] DDBridge driver detected: Digital Devices Cine CT V7 DVB adapter
[   11.620570] DDBridge: HW 00010002 REGMAP 00010004
[   11.620595] ddbridge 0000:01:00.0: irq 46 for MSI/MSI-X
[   11.656444] HDA driver get symbol successfully from i915 module
[   11.656470] snd_hda_intel 0000:00:03.0: irq 47 for MSI/MSI-X
[   11.656591] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[   11.673166] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[   11.677078] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[   11.677135] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
[   11.682107] SKU: Nid=0x1d sku_cfg=0x4005e601
[   11.682109] SKU: port_connectivity=0x1
[   11.682110] SKU: enable_pcbeep=0x0
[   11.682111] SKU: check_sum=0x00000005
[   11.682112] SKU: customization=0x000000e6
[   11.682112] SKU: external_amp=0x0
[   11.682113] SKU: platform_type=0x0
[   11.682114] SKU: swap=0x0
[   11.682114] SKU: override=0x1
[   11.682474] autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[   11.682475]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.682476]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   11.682477]    mono: mono_out=0x0
[   11.682478]    dig-out=0x1e/0x0
[   11.682478]    inputs:
[   11.682480]      Front Mic=0x19
[   11.682481]      Rear Mic=0x18
[   11.682482]      Line=0x1a
[   11.682493] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[   11.682494] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
[   11.683259] lp0: using parport0 (interrupt-driven).
[   11.699989] type=1400 audit(1449666196.601:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=389 comm="apparmor_parser"
[   11.699994] type=1400 audit(1449666196.601:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=389 comm="apparmor_parser"
[   11.699997] type=1400 audit(1449666196.601:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=389 comm="apparmor_parser"
[   11.700255] type=1400 audit(1449666196.601:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=389 comm="apparmor_parser"
[   11.700258] type=1400 audit(1449666196.601:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=389 comm="apparmor_parser"
[   11.700392] type=1400 audit(1449666196.601:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=389 comm="apparmor_parser"
[   11.715561] type=1400 audit(1449666196.617:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=394 comm="apparmor_parser"
[   11.732630] Port 0: Link 0, Link Port 0 (TAB 1): DUAL DVB-CT2 CXD2837
[   11.735478] Port 1: Link 0, Link Port 1 (TAB 2): NO MODULE
[   11.735855] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[   11.735936] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[   11.735988] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[   11.736096] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[   11.736147] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[   11.736208] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[   11.736256] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[   11.736608] Port 2: Link 0, Link Port 2 (TAB 3): NO MODULE
[   11.736612] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[   11.736617] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.736619] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR2 1 (20131115/utaddress-251)
[   11.736621] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 2 (20131115/utaddress-251)
[   11.736623] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 3 (20131115/utaddress-251)
[   11.736624] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.736625] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR2 1 (20131115/utaddress-251)
[   11.736626] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 2 (20131115/utaddress-251)
[   11.736628] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 3 (20131115/utaddress-251)
[   11.736629] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.736630] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   11.741788] Port 3: Link 0, Link Port 3 (TAB 4): NO MODULE
[   11.741935] 0 netstream channels
[   11.741936] DVB: registering new adapter (DDBridge)
[   11.741937] DVB: registering new adapter (DDBridge)
[   11.801996] tda18212dd: ChipID 4724 master
[   11.802119] tda18212dd: PowerState 02
[   12.072190] RFCal Log: 7d 7b 7c 6f  79 7e 56 66  73 5d 66 6b
[   12.072429] ddbridge 0000:01:00.0: DVB: registering adapter 0 frontend 0 (CXD2837 DVB-C DVB-T/T2)...
[   12.092976] tda18212dd: ChipID 4724 slave
[   12.093090] tda18212dd: PowerState 02
[   12.370877] RFCal Log: 03 7d 7d 7d  00 02 63 6e  78 6c 71 75
[   12.371124] ddbridge 0000:01:00.0: DVB: registering adapter 1 frontend 0 (CXD2837 DVB-C DVB-T/T2)...
[   14.016520] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   15.024641] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   16.618449] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   16.771663] init: failsafe main process (637) killed by TERM signal
[   17.005442] type=1400 audit(1449666201.913:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=780 comm="apparmor_parser"
[   17.005448] type=1400 audit(1449666201.913:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=780 comm="apparmor_parser"
[   17.005700] type=1400 audit(1449666201.913:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=780 comm="apparmor_parser"
[   17.086019] Bluetooth: Core ver 2.17
[   17.086031] NET: Registered protocol family 31
[   17.086032] Bluetooth: HCI device and connection manager initialized
[   17.086038] Bluetooth: HCI socket layer initialized
[   17.086040] Bluetooth: L2CAP socket layer initialized
[   17.086042] Bluetooth: SCO socket layer initialized
[   17.088786] Bluetooth: RFCOMM TTY layer initialized
[   17.088793] Bluetooth: RFCOMM socket layer initialized
[   17.088796] Bluetooth: RFCOMM ver 1.11
[   17.164151] init: cups main process (781) killed by HUP signal
[   17.164158] init: cups main process ended, respawning
[   17.183540] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.183543] Bluetooth: BNEP filters: protocol multicast
[   17.183550] Bluetooth: BNEP socket layer initialized
[   17.284154] type=1400 audit(1449666202.193:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=865 comm="apparmor_parser"
[   17.284160] type=1400 audit(1449666202.193:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=865 comm="apparmor_parser"
[   17.284318] type=1400 audit(1449666202.193:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=865 comm="apparmor_parser"
[   17.286038] type=1400 audit(1449666202.193:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=866 comm="apparmor_parser"
[   17.286043] type=1400 audit(1449666202.193:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=866 comm="apparmor_parser"
[   17.286046] type=1400 audit(1449666202.193:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=866 comm="apparmor_parser"
[   17.286302] type=1400 audit(1449666202.193:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=866 comm="apparmor_parser"
[   19.010583] alx 0000:05:00.0: irq 49 for MSI/MSI-X
[   19.010629] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.010744] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.012815] alx 0000:05:00.0 eth0: NIC Up: 1 Gbps Full
[   19.013050] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   19.281587] init: samba-ad-dc main process (1098) terminated with status 1
[   20.115616] init: plymouth-upstart-bridge main process (203) killed by TERM signal
[   20.151417] init: plymouth-stop pre-start process (1293) terminated with status 1
[   47.015656] audit_printk_skb: 87 callbacks suppressed
[   47.015658] type=1400 audit(1449666231.952:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2403 comm="apparmor_parser"
[   47.015663] type=1400 audit(1449666231.952:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2403 comm="apparmor_parser"
[   47.015921] type=1400 audit(1449666231.952:50): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2403 comm="apparmor_parser"
[ 2353.180771] usb 3-9: reset high-speed USB device number 3 using xhci_hcd
[ 2353.202810] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880035b2ea00
[ 2353.202812] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880035b2ea40
[ 3035.334330] usb 3-9: reset high-speed USB device number 3 using xhci_hcd
[ 3035.356382] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880035b2ea00
[ 3035.356385] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880035b2ea40
[ 3882.312358] hub 3-0:1.0: port 9 disabled by hub (EMI?), re-enabling...
[ 3882.312371] usb 3-9: USB disconnect, device number 3
[ 3885.555424] usb 3-9: new high-speed USB device number 5 using xhci_hcd
[ 3885.579220] usb 3-9: New USB device found, idVendor=05e3, idProduct=0745
[ 3885.579228] usb 3-9: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 3885.579233] usb 3-9: Product: USB Storage
[ 3885.579237] usb 3-9: SerialNumber: 000000000903
[ 3890.573454] usb 3-9: can't set config #1, error -110
[ 3890.573567] usb 3-9: USB disconnect, device number 5
[ 3890.812870] usb 3-9: new high-speed USB device number 6 using xhci_hcd
[ 3890.836715] usb 3-9: New USB device found, idVendor=05e3, idProduct=0745
[ 3890.836723] usb 3-9: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 3890.836728] usb 3-9: Product: USB Storage
[ 3890.836732] usb 3-9: SerialNumber: 000000000903
[ 3890.838169] usb-storage 3-9:1.0: USB Mass Storage device detected
[ 3890.838321] scsi7 : usb-storage 3-9:1.0
[ 3891.836914] scsi 7:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0903 PQ: 0 ANSI: 6
[ 3891.837542] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 3891.842781] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 3968.567840] usb 3-9: reset high-speed USB device number 6 using xhci_hcd
[ 3968.589872] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b41d3880
[ 3968.589874] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b41d38c0
[ 4294.815472] usb 3-9: reset high-speed USB device number 6 using xhci_hcd
[ 4294.837499] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b41d3880
[ 4294.837501] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b41d38c0
[ 8642.396427] usb 3-9: reset high-speed USB device number 6 using xhci_hcd
[ 8642.418495] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b41d3880
[ 8642.418497] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b41d38c0
[ 9657.957468] usb 3-9: reset high-speed USB device number 6 using xhci_hcd
[ 9657.979522] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b41d3880
[ 9657.979525] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b41d38c0
[11561.237698] usb 3-9: reset high-speed USB device number 6 using xhci_hcd
[11561.259824] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b41d3880
[11561.259826] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b41d38c0
[11706.837541] hub 3-0:1.0: port 9 disabled by hub (EMI?), re-enabling...
[11706.837548] usb 3-9: USB disconnect, device number 6
[11737.245046] sd 7:0:0:0: Device offlined - not ready after error recovery
[11737.488722] usb 3-9: new high-speed USB device number 7 using xhci_hcd
[11737.512579] usb 3-9: New USB device found, idVendor=05e3, idProduct=0745
[11737.512588] usb 3-9: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[11737.512593] usb 3-9: Product: USB Storage
[11737.512596] usb 3-9: SerialNumber: 000000000903
[11737.513647] usb-storage 3-9:1.0: USB Mass Storage device detected
[11737.513746] scsi8 : usb-storage 3-9:1.0
[11738.512790] scsi 8:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0903 PQ: 0 ANSI: 6
[11738.513258] sd 8:0:0:0: Attached scsi generic sg2 type 0
[11738.521304] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[12120.153491] usb 3-9: reset high-speed USB device number 7 using xhci_hcd
[12120.175568] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003639f480
[12120.175571] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003639f4c0
[12351.452670] hub 3-0:1.0: port 9 disabled by hub (EMI?), re-enabling...
[12351.452683] usb 3-9: USB disconnect, device number 7
[12354.695680] usb 3-9: new high-speed USB device number 8 using xhci_hcd
[12354.719861] usb 3-9: New USB device found, idVendor=05e3, idProduct=0745
[12354.719869] usb 3-9: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[12354.719874] usb 3-9: Product: USB Storage
[12354.719878] usb 3-9: SerialNumber: 000000000903
[12354.720933] usb-storage 3-9:1.0: USB Mass Storage device detected
[12354.721042] scsi9 : usb-storage 3-9:1.0
[12355.719717] scsi 9:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0903 PQ: 0 ANSI: 6
[12355.720228] sd 9:0:0:0: Attached scsi generic sg2 type 0
[12355.727950] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[12856.000134] usb 3-9: reset high-speed USB device number 8 using xhci_hcd
[12856.022233] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b41d3380
[12856.022235] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b41d33c0
[12916.340581] usb 3-9: reset high-speed USB device number 8 using xhci_hcd
[12916.362623] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b41d3380
[12916.362625] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b41d33c0
[13978.950154] usb 3-9: reset high-speed USB device number 8 using xhci_hcd
[13978.972243] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b41d3380
[13978.972245] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b41d33c0
[14507.000966] usb 3-9: reset high-speed USB device number 8 using xhci_hcd
[14507.023055] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b41d3380
[14507.023057] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b41d33c0
[15299.788465] usb 3-9: reset high-speed USB device number 8 using xhci_hcd
[15299.810522] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b41d3380
[15299.810525] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b41d33c0
[16863.526961] usb 3-9: reset high-speed USB device number 8 using xhci_hcd
[16863.549025] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b41d3380
[16863.549027] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b41d33c0
[17911.814592] usb 3-9: reset high-speed USB device number 8 using xhci_hcd
[17911.836665] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b41d3380
[17911.836668] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b41d33c0
[18224.931078] hub 3-0:1.0: port 9 disabled by hub (EMI?), re-enabling...
[18224.931091] usb 3-9: USB disconnect, device number 8
[18228.174347] usb 3-9: new high-speed USB device number 9 using xhci_hcd
[18228.198172] usb 3-9: New USB device found, idVendor=05e3, idProduct=0745
[18228.198180] usb 3-9: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[18228.198185] usb 3-9: Product: USB Storage
[18228.198189] usb 3-9: SerialNumber: 000000000903
[18228.199227] usb-storage 3-9:1.0: USB Mass Storage device detected
[18228.199333] scsi10 : usb-storage 3-9:1.0
[18229.198320] scsi 10:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0903 PQ: 0 ANSI: 6
[18229.198811] sd 10:0:0:0: Attached scsi generic sg2 type 0
[18229.211739] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[18974.931492] usb 3-9: reset high-speed USB device number 9 using xhci_hcd
[18974.953556] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88009dec4100
[18974.953558] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88009dec4140
[19235.724977] usb 3-9: reset high-speed USB device number 9 using xhci_hcd
[19235.747070] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88009dec4100
[19235.747072] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88009dec4140
[19494.473122] usb 3-9: reset high-speed USB device number 9 using xhci_hcd
[19494.495164] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88009dec4100
[19494.495166] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88009dec4140
[19759.357543] usb 3-9: reset high-speed USB device number 9 using xhci_hcd
[19759.379589] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88009dec4100
[19759.379591] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88009dec4140
[22022.833676] perf samples too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[23256.036669] usb 3-9: reset high-speed USB device number 9 using xhci_hcd
[23256.058705] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88009dec4100
[23256.058707] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88009dec4140
[26253.628271] usb 3-9: reset high-speed USB device number 9 using xhci_hcd
[26253.650330] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88009dec4100
[26253.650332] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88009dec4140
[26318.059622] usb 3-9: reset high-speed USB device number 9 using xhci_hcd
[26318.081692] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88009dec4100
[26318.081694] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88009dec4140
[27820.035588] hub 3-0:1.0: port 9 disabled by hub (EMI?), re-enabling...
[27820.035592] usb 3-9: USB disconnect, device number 9
[27850.129542] sd 10:0:0:0: Device offlined - not ready after error recovery
[27850.377209] usb 3-9: new high-speed USB device number 10 using xhci_hcd
[27850.400944] usb 3-9: New USB device found, idVendor=05e3, idProduct=0745
[27850.400946] usb 3-9: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[27850.400948] usb 3-9: Product: USB Storage
[27850.400949] usb 3-9: SerialNumber: 000000000903
[27850.401803] usb-storage 3-9:1.0: USB Mass Storage device detected
[27850.401860] scsi11 : usb-storage 3-9:1.0
[27851.401197] scsi 11:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0903 PQ: 0 ANSI: 6
[27851.401367] sd 11:0:0:0: Attached scsi generic sg2 type 0
[27851.406132] sd 11:0:0:0: [sdb] Attached SCSI removable disk
[28029.912571] usb 3-9: reset high-speed USB device number 10 using xhci_hcd
[28029.934668] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5c76500
[28029.934670] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5c76540
[28284.749530] usb 3-9: reset high-speed USB device number 10 using xhci_hcd
[28284.771567] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5c76500
[28284.771572] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5c76540
[28291.908572] usb 3-9: reset high-speed USB device number 10 using xhci_hcd
[28291.930603] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5c76500
[28291.930605] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5c76540
[28614.065210] usb 3-9: reset high-speed USB device number 10 using xhci_hcd
[28614.087294] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5c76500
[28614.087297] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5c76540
[28874.131892] hub 3-0:1.0: port 9 disabled by hub (EMI?), re-enabling...
[28874.131897] usb 3-9: USB disconnect, device number 10
[28904.809129] sd 11:0:0:0: Device offlined - not ready after error recovery
[28905.052746] usb 3-9: new high-speed USB device number 11 using xhci_hcd
[28905.076553] usb 3-9: New USB device found, idVendor=05e3, idProduct=0745
[28905.076561] usb 3-9: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[28905.076566] usb 3-9: Product: USB Storage
[28905.076570] usb 3-9: SerialNumber: 000000000903
[28905.077620] usb-storage 3-9:1.0: USB Mass Storage device detected
[28905.077707] scsi12 : usb-storage 3-9:1.0
[28906.076775] scsi 12:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0903 PQ: 0 ANSI: 6
[28906.077208] sd 12:0:0:0: Attached scsi generic sg2 type 0
[28906.085820] sd 12:0:0:0: [sdb] Attached SCSI removable disk
[29940.021070] usb 3-9: reset high-speed USB device number 11 using xhci_hcd
[29940.043116] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011588ad80
[29940.043119] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011588adc0
[29942.953387] usb 3-9: reset high-speed USB device number 11 using xhci_hcd
[29942.975463] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011588ad80
[29942.975465] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011588adc0
[31062.967083] usb 3-9: reset high-speed USB device number 11 using xhci_hcd
[31062.989145] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011588ad80
[31062.989147] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011588adc0
[31129.443860] usb 3-9: reset high-speed USB device number 11 using xhci_hcd
[31129.465931] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011588ad80
[31129.465933] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011588adc0
[33108.406241] usb 3-9: reset high-speed USB device number 11 using xhci_hcd
[33108.428299] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011588ad80
[33108.428302] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011588adc0
[34954.415041] usb 3-9: reset high-speed USB device number 11 using xhci_hcd
[34954.437104] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011588ad80
[34954.437106] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011588adc0
[36325.882200] usb 3-9: reset high-speed USB device number 11 using xhci_hcd
[36325.904289] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011588ad80
[36325.904291] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011588adc0
[36780.457412] hub 3-0:1.0: port 9 disabled by hub (EMI?), re-enabling...
[36780.457417] usb 3-9: USB disconnect, device number 11
[36810.878992] sd 12:0:0:0: Device offlined - not ready after error recovery
[36811.122630] usb 3-9: new high-speed USB device number 12 using xhci_hcd
[36811.146523] usb 3-9: New USB device found, idVendor=05e3, idProduct=0745
[36811.146532] usb 3-9: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[36811.146537] usb 3-9: Product: USB Storage
[36811.146564] usb 3-9: SerialNumber: 000000000903
[36811.147804] usb-storage 3-9:1.0: USB Mass Storage device detected
[36811.147936] scsi13 : usb-storage 3-9:1.0
[36812.146676] scsi 13:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0903 PQ: 0 ANSI: 6
[36812.147131] sd 13:0:0:0: Attached scsi generic sg2 type 0
[36812.153503] sd 13:0:0:0: [sdb] Attached SCSI removable disk
[40423.409052] usb 3-9: reset high-speed USB device number 12 using xhci_hcd
[40423.431100] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5cfb000
[40423.431102] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5cfb040
[40678.066274] usb 3-9: reset high-speed USB device number 12 using xhci_hcd
[40678.088367] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5cfb000
[40678.088379] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5cfb040
[41067.722549] usb 3-9: reset high-speed USB device number 12 using xhci_hcd
[41067.744598] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5cfb000
[41067.744600] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5cfb040
[42436.453314] usb 3-9: reset high-speed USB device number 12 using xhci_hcd
[42436.475395] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5cfb000
[42436.475397] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5cfb040
[47142.167309] usb 3-9: reset high-speed USB device number 12 using xhci_hcd
[47142.189391] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5cfb000
[47142.189393] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5cfb040
[48699.022598] usb 3-9: reset high-speed USB device number 12 using xhci_hcd
[48699.044619] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5cfb000
[48699.044621] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5cfb040
[49471.411777] usb 3-9: reset high-speed USB device number 12 using xhci_hcd
[49471.433832] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5cfb000
[49471.433834] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5cfb040
[50186.292939] usb 3-9: reset high-speed USB device number 12 using xhci_hcd
[50186.314987] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5cfb000
[50186.314989] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5cfb040
[51030.036775] usb 3-9: reset high-speed USB device number 12 using xhci_hcd
[51030.058830] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5cfb000
[51030.058833] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b5cfb040
[53038.822588] hub 3-0:1.0: port 9 disabled by hub (EMI?), re-enabling...
[53038.822601] usb 3-9: USB disconnect, device number 12
[53069.503733] sd 13:0:0:0: Device offlined - not ready after error recovery
[53069.747365] usb 3-9: new high-speed USB device number 13 using xhci_hcd
[53069.771358] usb 3-9: New USB device found, idVendor=05e3, idProduct=0745
[53069.771367] usb 3-9: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[53069.771371] usb 3-9: Product: USB Storage
[53069.771375] usb 3-9: SerialNumber: 000000000903
[53069.772472] usb-storage 3-9:1.0: USB Mass Storage device detected
[53069.772677] scsi14 : usb-storage 3-9:1.0
[53070.771446] scsi 14:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0903 PQ: 0 ANSI: 6
[53070.772061] sd 14:0:0:0: Attached scsi generic sg2 type 0
[53070.778228] sd 14:0:0:0: [sdb] Attached SCSI removable disk
[59009.808214] usb 3-9: reset high-speed USB device number 13 using xhci_hcd
[59009.830266] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88008e7d5f00
[59009.830268] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88008e7d5f40
[59790.143413] usb 3-9: reset high-speed USB device number 13 using xhci_hcd
[59790.165447] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88008e7d5f00
[59790.165449] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88008e7d5f40
[61657.905439] usb 3-9: reset high-speed USB device number 13 using xhci_hcd
[61657.927477] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88008e7d5f00
[61657.927480] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88008e7d5f40
[61671.436511] usb 3-9: reset high-speed USB device number 13 using xhci_hcd
[61671.458604] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88008e7d5f00
[61671.458606] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88008e7d5f40
[62255.409569] usb 3-9: reset high-speed USB device number 13 using xhci_hcd
[62255.431637] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88008e7d5f00
[62255.431639] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88008e7d5f40
[64112.727847] type=1400 audit(1449730377.428:51): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=6255 comm="apparmor_parser"
[64112.727852] type=1400 audit(1449730377.428:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=6255 comm="apparmor_parser"
[64112.728105] type=1400 audit(1449730377.428:53): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=6255 comm="apparmor_parser"
[65181.410860] usb 3-9: reset high-speed USB device number 13 using xhci_hcd
[65181.432958] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88008e7d5f00
[65181.432960] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88008e7d5f40
[67776.051053] usb 3-9: reset high-speed USB device number 13 using xhci_hcd
[67776.073128] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88008e7d5f00
[67776.073130] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88008e7d5f40
[68915.525428] hub 3-0:1.0: port 9 disabled by hub (EMI?), re-enabling...
[68915.525441] usb 3-9: USB disconnect, device number 13
[124677.143231] usb 3-9: new high-speed USB device number 126 using xhci_hcd
[124682.136977] xhci_hcd 0000:00:14.0: Timeout while waiting for address device command
[124687.334471] xhci_hcd 0000:00:14.0: Timeout while waiting for address device command
[124687.538191] usb 3-9: device not accepting address 126, error -62
[140041.453461] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 112
[140041.453464] Raw EDID:
[140041.453465]         00 ff ff ff ff ff ff 00 50 6c 00 00 01 01 01 01
[140041.453466]         01 17 01 03 80 3a 20 78 0a 0d c9 a0 57 47 98 27
[140041.453467]         12 48 4c 21 4b 00 01 01 01 01 01 20 52 01 01 01
[140041.453468]         01 01 01 01 01 01 66 21 50 b0 51 00 1b 30 40 70
[140041.453468]         36 00 44 40 21 00 00 18 01 1d 00 72 51 d0 1e 20
[140041.453469]         6e 28 55 00 44 40 21 00 00 1e 00 00 00 fc 00 4d
[140041.453470]         54 35 35 33 31 0a 20 20 20 20 20 20 00 00 00 fd
[140041.453471]         00 32 55 0e 46 10 00 0a 20 20 20 20 20 20 01 8e
[146660.316100] usb 3-9: new high-speed USB device number 72 using xhci_hcd
[146665.309857] xhci_hcd 0000:00:14.0: Timeout while waiting for address device command
[146670.507334] xhci_hcd 0000:00:14.0: Timeout while waiting for address device command
[146670.711124] usb 3-9: device not accepting address 72, error -62
[150626.065696] type=1400 audit(1449816999.058:54): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=14954 comm="apparmor_parser"
[150626.065701] type=1400 audit(1449816999.058:55): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=14954 comm="apparmor_parser"
[150626.065954] type=1400 audit(1449816999.058:56): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=14954 comm="apparmor_parser"
[184985.890166] usb 3-9: new high-speed USB device number 126 using xhci_hcd
[184990.883876] xhci_hcd 0000:00:14.0: Timeout while waiting for address device command
[185000.442680] xhci_hcd 0000:00:14.0: Stopped the command ring failed, maybe the host is dead
[185000.442690] xhci_hcd 0000:00:14.0: Abort command ring failed
[185000.442894] xhci_hcd 0000:00:14.0: HC died; cleaning up
[185005.637389] xhci_hcd 0000:00:14.0: Timeout while waiting for address device command
[185005.637392] xhci_hcd 0000:00:14.0: Abort the command ring, but the xHCI is dead.
[185005.841180] usb 3-9: device not accepting address 126, error -108
[185010.834914] xhci_hcd 0000:00:14.0: Timeout while waiting for a slot
[185010.834920] xhci_hcd 0000:00:14.0: Abort the command ring, but the xHCI is dead.
[185015.828682] xhci_hcd 0000:00:14.0: Timeout while waiting for a slot
[185015.828691] xhci_hcd 0000:00:14.0: Abort the command ring, but the xHCI is dead.
[185020.822423] xhci_hcd 0000:00:14.0: Timeout while waiting for a slot
[185020.822426] xhci_hcd 0000:00:14.0: Abort the command ring, but the xHCI is dead.
[185020.822439] usb 3-3: USB disconnect, device number 2
[185020.822603] usb 3-10: USB disconnect, device number 4
[196399.771759] usb 5-1: new full-speed USB device number 2 using xhci_hcd
[196399.825809] usb 5-1: New USB device found, idVendor=062a, idProduct=4101
[196399.825812] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[196399.825814] usb 5-1: Product: 2.4G Keyboard Mouse
[196399.825815] usb 5-1: Manufacturer: MOSART Semi.
[196399.825902] usb 5-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[196399.841005] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/usb5/5-1/5-1:1.0/input/input18
[196399.841136] hid-generic 0003:062A:4101.0003: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:02:00.0-1/input0
[196399.869023] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/usb5/5-1/5-1:1.1/input/input19
[196399.869167] hid-generic 0003:062A:4101.0004: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:02:00.0-1/input1
[201244.383354] type=1326 audit(1449867680.753:57): auid=4294967295 uid=65534 gid=65534 ses=4294967295 pid=7991 comm="vsftpd" sig=31 syscall=37 compat=0 ip=0x7f5ff54f5cd7 code=0x0
[226185.776688] perf samples too long (5045 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[226331.743261] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 113
[226331.743266] Raw EDID:
[226331.743268]         00 ff ff ff ff ff ff 00 50 6c 00 00 01 01 01 01
[226331.743270]         01 17 01 03 80 3a 20 78 0a 0d c9 a0 57 47 98 27
[226331.743272]         12 48 4c 21 4b 00 01 01 01 01 01 01 01 01 01 01
[226331.743274]         72 01 01 01 01 01 66 21 50 b0 51 00 1b 30 40 70
[226331.743276]         36 00 44 40 21 00 00 18 01 1d 00 72 51 d0 1e 20
[226331.743278]         6e 28 55 00 44 40 21 00 00 1e 00 00 00 fc 00 4d
[226331.743280]         54 35 35 33 31 0a 20 20 20 20 20 20 00 00 00 fd
[226331.743282]         00 32 55 0e 46 10 00 0a 20 20 20 20 20 20 01 8e
[237423.468674] type=1400 audit(1449903905.127:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=10231 comm="apparmor_parser"
[237423.468679] type=1400 audit(1449903905.127:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=10231 comm="apparmor_parser"
[237423.468934] type=1400 audit(1449903905.127:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=10231 comm="apparmor_parser"
[312631.709591] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 183
[312631.709599] Raw EDID:
[312631.709603]         00 ff ff ff ff ff ff 00 50 6c 00 00 01 01 01 01
[312631.709607]         01 17 01 03 80 3a 20 78 0a 0d c9 a0 57 47 98 27
[312631.709610]         12 48 4c 21 4b 00 01 01 01 01 01 01 01 01 01 01
[312631.709612]         b8 01 01 01 01 01 66 21 50 b0 51 00 1b 30 40 70
[312631.709615]         36 00 44 40 21 00 00 18 01 1d 00 72 51 d0 1e 20
[312631.709618]         6e 28 55 00 44 40 21 00 00 1e 00 00 00 fc 00 4d
[312631.709621]         54 35 35 33 31 0a 20 20 20 20 20 20 00 00 00 fd
[312631.709623]         00 32 55 0e 46 10 00 0a 20 20 20 20 20 20 01 8e
[312631.721805] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 183
[312631.721809] Raw EDID:
[312631.721812]         00 ff ff ff ff ff ff 00 50 6c 00 00 01 01 01 01
[312631.721815]         01 17 01 03 80 3a 20 78 0a 0d c9 a0 57 47 98 27
[312631.721818]         12 48 4c 21 4b 00 01 01 01 01 01 01 01 01 01 01
[312631.721821]         b8 01 01 01 01 01 66 21 50 b0 51 00 1b 30 40 70
[312631.721824]         36 00 44 40 21 00 00 18 01 1d 00 72 51 d0 1e 20
[312631.721826]         6e 28 55 00 44 40 21 00 00 1e 00 00 00 fc 00 4d
[312631.721829]         54 35 35 33 31 0a 20 20 20 20 20 20 00 00 00 fd
[312631.721832]         00 32 55 0e 46 10 00 0a 20 20 20 20 20 20 01 8e
[312631.734506] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 183
[312631.734508] Raw EDID:
[312631.734510]         00 ff ff ff ff ff ff 00 50 6c 00 00 01 01 01 01
[312631.734511]         01 17 01 03 80 3a 20 78 0a 0d c9 a0 57 47 98 27
[312631.734511]         12 48 4c 21 4b 00 01 01 01 01 01 01 01 01 01 01
[312631.734512]         b8 01 01 01 01 01 66 21 50 b0 51 00 1b 30 40 70
[312631.734513]         36 00 44 40 21 00 00 18 01 1d 00 72 51 d0 1e 20
[312631.734513]         6e 28 55 00 44 40 21 00 00 1e 00 00 00 fc 00 4d
[312631.734514]         54 35 35 33 31 0a 20 20 20 20 20 20 00 00 00 fd
[312631.734515]         00 32 55 0e 46 10 00 0a 20 20 20 20 20 20 01 8e
[312631.746645] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 183
[312631.746647] Raw EDID:
[312631.746648]         00 ff ff ff ff ff ff 00 50 6c 00 00 01 01 01 01
[312631.746649]         01 17 01 03 80 3a 20 78 0a 0d c9 a0 57 47 98 27
[312631.746650]         12 48 4c 21 4b 00 01 01 01 01 01 01 01 01 01 01
[312631.746651]         b8 01 01 01 01 01 66 21 50 b0 51 00 1b 30 40 70
[312631.746651]         36 00 44 40 21 00 00 18 01 1d 00 72 51 d0 1e 20
[312631.746652]         6e 28 55 00 44 40 21 00 00 1e 00 00 00 fc 00 4d
[312631.746653]         54 35 35 33 31 0a 20 20 20 20 20 20 00 00 00 fd
[312631.746654]         00 32 55 0e 46 10 00 0a 20 20 20 20 20 20 01 8e
[312631.746656] i915 0000:00:02.0: HDMI-A-2: EDID block 0 invalid.
[323143.675451] type=1400 audit(1449989732.649:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=7493 comm="apparmor_parser"
[323143.675457] type=1400 audit(1449989732.649:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=7493 comm="apparmor_parser"
[323143.675710] type=1400 audit(1449989732.649:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=7493 comm="apparmor_parser"
[368296.065476] HDMI: ELD buf size is 0, force 128
[368296.065495] HDMI: invalid ELD data byte 0
[368296.065543] HDMI: ELD buf size is 0, force 128
[368296.065556] HDMI: invalid ELD data byte 0
[368297.000253] HDMI: ELD buf size is 0, force 128
[368297.000272] HDMI: invalid ELD data byte 0
[368297.000309] HDMI: ELD buf size is 0, force 128
[368297.000332] HDMI: invalid ELD data byte 0
[373643.705933] usb 6-2: new SuperSpeed USB device number 2 using xhci_hcd
[373643.724373] usb 6-2: Parent hub missing LPM exit latency info.  Power management will be impacted.
[373643.728868] usb 6-2: New USB device found, idVendor=1f75, idProduct=0917
[373643.728870] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[373643.728871] usb 6-2: Product: USB 3.0
[373643.728882] usb 6-2: Manufacturer: innostor
[373643.728883] usb 6-2: SerialNumber: 201207223665
[373643.729380] usb-storage 6-2:1.0: USB Mass Storage device detected
[373643.729419] scsi15 : usb-storage 6-2:1.0
[373644.725107] scsi 15:0:0:0: Direct-Access     IS917    innostor         1.00 PQ: 0 ANSI: 6
[373644.726745] sd 15:0:0:0: Attached scsi generic sg2 type 0
[373644.727113] sd 15:0:0:0: [sdb] 123904000 512-byte logical blocks: (63.4 GB/59.0 GiB)
[373644.727455] sd 15:0:0:0: [sdb] Write Protect is off
[373644.727460] sd 15:0:0:0: [sdb] Mode Sense: 23 00 00 00
[373644.727571] sd 15:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[373644.730432]  sdb: unknown partition table
[373644.730998] sd 15:0:0:0: [sdb] Attached SCSI removable disk
[373692.359730] usb 6-2: USB disconnect, device number 2
[373725.767087] usb 5-1: USB disconnect, device number 2
[373727.840273] usb 5-2: new full-speed USB device number 97 using xhci_hcd
[373727.894617] usb 5-2: New USB device found, idVendor=062a, idProduct=4101
[373727.894627] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[373727.894632] usb 5-2: Product: 2.4G Keyboard Mouse
[373727.894636] usb 5-2: Manufacturer: MOSART Semi.
[373727.894869] usb 5-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[373727.909756] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/usb5/5-2/5-2:1.0/input/input20
[373727.910027] hid-generic 0003:062A:4101.0005: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:02:00.0-2/input0
[373727.938158] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/usb5/5-2/5-2:1.1/input/input21
[373727.938445] hid-generic 0003:062A:4101.0006: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:02:00.0-2/input1
[373728.915148] usb 6-1: new SuperSpeed USB device number 3 using xhci_hcd
[373728.933640] usb 6-1: Parent hub missing LPM exit latency info.  Power management will be impacted.
[373728.938137] usb 6-1: New USB device found, idVendor=1f75, idProduct=0917
[373728.938140] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[373728.938141] usb 6-1: Product: USB 3.0
[373728.938142] usb 6-1: Manufacturer: innostor
[373728.938143] usb 6-1: SerialNumber: 201207223665
[373728.938637] usb-storage 6-1:1.0: USB Mass Storage device detected
[373728.938675] scsi16 : usb-storage 6-1:1.0
[373729.934226] scsi 16:0:0:0: Direct-Access     IS917    innostor         1.00 PQ: 0 ANSI: 6
[373729.934359] sd 16:0:0:0: Attached scsi generic sg2 type 0
[373729.937590] sd 16:0:0:0: [sdb] 123904000 512-byte logical blocks: (63.4 GB/59.0 GiB)
[373729.938044] sd 16:0:0:0: [sdb] Write Protect is off
[373729.938046] sd 16:0:0:0: [sdb] Mode Sense: 23 00 00 00
[373729.938805] sd 16:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[373729.940483]  sdb: unknown partition table
[373729.943249] sd 16:0:0:0: [sdb] Attached SCSI removable disk
[373746.592321] sdb: detected capacity change from 63438848000 to 0
[373748.940244] usb 6-1: USB disconnect, device number 3
[373754.878693] usb 6-1: new SuperSpeed USB device number 4 using xhci_hcd
[373754.897147] usb 6-1: Parent hub missing LPM exit latency info.  Power management will be impacted.
[373754.901660] usb 6-1: New USB device found, idVendor=1f75, idProduct=0917
[373754.901665] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[373754.901668] usb 6-1: Product: USB 3.0
[373754.901670] usb 6-1: Manufacturer: innostor
[373754.901672] usb 6-1: SerialNumber: 201207223257
[373754.902201] usb-storage 6-1:1.0: USB Mass Storage device detected
[373754.902667] scsi17 : usb-storage 6-1:1.0
[373755.901920] scsi 17:0:0:0: Direct-Access     IS917    innostor         1.00 PQ: 0 ANSI: 6
[373755.902511] sd 17:0:0:0: [sdb] 123904000 512-byte logical blocks: (63.4 GB/59.0 GiB)
[373755.902635] sd 17:0:0:0: [sdb] Write Protect is off
[373755.902642] sd 17:0:0:0: [sdb] Mode Sense: 23 00 00 00
[373755.902763] sd 17:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[373755.905438] sd 17:0:0:0: Attached scsi generic sg2 type 0
[373755.912598]  sdb: unknown partition table
[373755.913272] sd 17:0:0:0: [sdb] Attached SCSI removable disk
[373770.225125] sd 17:0:0:0: [sdb]
[373770.225129] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[373770.225131] sd 17:0:0:0: [sdb]
[373770.225132] Sense Key : Not Ready [current]
[373770.225134] sd 17:0:0:0: [sdb]
[373770.225136] Add. Sense: Medium not present
[373770.225137] sd 17:0:0:0: [sdb] CDB:
[373770.225138] Read(10): 28 00 00 00 01 78 00 00 08 00
[373770.225142] end_request: I/O error, dev sdb, sector 376
[373770.225144] Buffer I/O error on device sdb, logical block 47
[373770.225873] sd 17:0:0:0: [sdb]
[373770.225874] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[373770.225875] sd 17:0:0:0: [sdb]
[373770.225875] Sense Key : Not Ready [current]
[373770.225877] sd 17:0:0:0: [sdb]
[373770.225878] Add. Sense: Medium not present
[373770.225879] sd 17:0:0:0: [sdb] CDB:
[373770.225879] Read(10): 28 00 00 00 01 78 00 00 08 00
[373770.225883] end_request: I/O error, dev sdb, sector 376
[373770.225884] Buffer I/O error on device sdb, logical block 47
[373770.226621] sd 17:0:0:0: [sdb]
[373770.226622] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[373770.226623] sd 17:0:0:0: [sdb]
[373770.226624] Sense Key : Not Ready [current]
[373770.226625] sd 17:0:0:0: [sdb]
[373770.226626] Add. Sense: Medium not present
[373770.226627] sd 17:0:0:0: [sdb] CDB:
[373770.226628] Read(10): 28 00 00 00 02 00 00 00 08 00
[373770.226631] end_request: I/O error, dev sdb, sector 512
[373770.226632] Buffer I/O error on device sdb, logical block 64
[373770.227372] sd 17:0:0:0: [sdb]
[373770.227373] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[373770.227374] sd 17:0:0:0: [sdb]
[373770.227374] Sense Key : Not Ready [current]
[373770.227376] sd 17:0:0:0: [sdb]
[373770.227377] Add. Sense: Medium not present
[373770.227378] sd 17:0:0:0: [sdb] CDB:
[373770.227378] Read(10): 28 00 00 00 02 00 00 00 08 00
[373770.227382] end_request: I/O error, dev sdb, sector 512
[373770.227383] Buffer I/O error on device sdb, logical block 64
[373770.228123] sd 17:0:0:0: [sdb]
[373770.228124] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[373770.228125] sd 17:0:0:0: [sdb]
[373770.228126] Sense Key : Not Ready [current]
[373770.228127] sd 17:0:0:0: [sdb]
[373770.228128] Add. Sense: Medium not present
[373770.228129] sd 17:0:0:0: [sdb] CDB:
[373770.228130] Read(10): 28 00 00 00 00 20 00 00 08 00
[373770.228134] end_request: I/O error, dev sdb, sector 32
[373770.228136] Buffer I/O error on device sdb, logical block 4
[373770.228906] sd 17:0:0:0: [sdb]
[373770.228908] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[373770.228909] sd 17:0:0:0: [sdb]
[373770.228910] Sense Key : Not Ready [current]
[373770.228912] sd 17:0:0:0: [sdb]
[373770.228913] Add. Sense: Medium not present
[373770.228914] sd 17:0:0:0: [sdb] CDB:
[373770.228915] Read(10): 28 00 00 00 00 20 00 00 08 00
[373770.228919] end_request: I/O error, dev sdb, sector 32
[373770.228920] Buffer I/O error on device sdb, logical block 4
[373770.229620] sd 17:0:0:0: [sdb]
[373770.229622] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[373770.229623] sd 17:0:0:0: [sdb]
[373770.229623] Sense Key : Not Ready [current]
[373770.229625] sd 17:0:0:0: [sdb]
[373770.229627] Add. Sense: Medium not present
[373770.229628] sd 17:0:0:0: [sdb] CDB:
[373770.229628] Read(10): 28 00 00 60 00 00 00 00 08 00
[373770.229632] end_request: I/O error, dev sdb, sector 6291456
[373770.229634] Buffer I/O error on device sdb, logical block 786432
[373770.230371] sd 17:0:0:0: [sdb]
[373770.230374] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[373770.230375] sd 17:0:0:0: [sdb]
[373770.230376] Sense Key : Not Ready [current]
[373770.230378] sd 17:0:0:0: [sdb]
[373770.230379] Add. Sense: Medium not present
[373770.230380] sd 17:0:0:0: [sdb] CDB:
[373770.230381] Read(10): 28 00 00 00 10 00 00 00 08 00
[373770.230385] end_request: I/O error, dev sdb, sector 4096
[373770.230387] Buffer I/O error on device sdb, logical block 512
[373770.232599] sdb: detected capacity change from 63438848000 to 0
[373772.417591] usb 6-1: USB disconnect, device number 4
[373782.072629] usb 6-1: new SuperSpeed USB device number 5 using xhci_hcd
[373782.091127] usb 6-1: Parent hub missing LPM exit latency info.  Power management will be impacted.
[373782.095608] usb 6-1: New USB device found, idVendor=1f75, idProduct=0917
[373782.095613] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[373782.095616] usb 6-1: Product: USB 3.0
[373782.095618] usb 6-1: Manufacturer: innostor
[373782.095620] usb 6-1: SerialNumber: 201207222279
[373782.096613] usb-storage 6-1:1.0: USB Mass Storage device detected
[373782.096827] scsi18 : usb-storage 6-1:1.0
[373783.095928] scsi 18:0:0:0: Direct-Access     IS917    innostor         1.00 PQ: 0 ANSI: 6
[373783.098202] sd 18:0:0:0: [sdb] 61440000 512-byte logical blocks: (31.4 GB/29.2 GiB)
[373783.098515] sd 18:0:0:0: Attached scsi generic sg2 type 0
[373783.099103] sd 18:0:0:0: [sdb] Write Protect is off
[373783.099107] sd 18:0:0:0: [sdb] Mode Sense: 23 00 00 00
[373783.099752] sd 18:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[373783.105065]  sdb: unknown partition table
[373783.106127] sd 18:0:0:0: [sdb] Attached SCSI removable disk
[375952.996321] sdb: detected capacity change from 31457280000 to 0
[375957.604189] usb 6-1: USB disconnect, device number 5
[409507.444873] type=1400 audit(1450076204.552:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=26621 comm="apparmor_parser"
[409507.444879] type=1400 audit(1450076204.552:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=26621 comm="apparmor_parser"
[409507.445171] type=1400 audit(1450076204.552:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=26621 comm="apparmor_parser"
[426583.012029] HDMI: ELD buf size is 0, force 128
[426583.012049] HDMI: invalid ELD data byte 0
[426583.012086] HDMI: ELD buf size is 0, force 128
[426583.012110] HDMI: invalid ELD data byte 0
[426583.647222] HDMI: ELD buf size is 0, force 128
[426583.647242] HDMI: invalid ELD data byte 0
[426583.647289] HDMI: ELD buf size is 0, force 128
[426583.647303] HDMI: invalid ELD data byte 0
[495002.054683] type=1400 audit(1450161806.210:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=16661 comm="apparmor_parser"
[495002.054688] type=1400 audit(1450161806.210:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=16661 comm="apparmor_parser"
[495002.054942] type=1400 audit(1450161806.210:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=16661 comm="apparmor_parser"
[581879.763948] type=1400 audit(1450248792.706:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=21141 comm="apparmor_parser"
[581879.763965] type=1400 audit(1450248792.706:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=21141 comm="apparmor_parser"
[581879.764906] type=1400 audit(1450248792.706:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=21141 comm="apparmor_parser"
[582636.224354] HDMI: ELD buf size is 0, force 128
[582636.224371] HDMI: invalid ELD data byte 0
[582636.224417] HDMI: ELD buf size is 0, force 128
[582636.224439] HDMI: invalid ELD data byte 0
[582636.991356] HDMI: ELD buf size is 0, force 128
[582636.991381] HDMI: invalid ELD data byte 0
[582636.991425] HDMI: ELD buf size is 0, force 128
[582636.991447] HDMI: invalid ELD data byte 0
[668772.503749] type=1400 audit(1450335794.256:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=15902 comm="apparmor_parser"
[668772.503755] type=1400 audit(1450335794.256:74): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=15902 comm="apparmor_parser"
[668772.504009] type=1400 audit(1450335794.256:75): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=15902 comm="apparmor_parser"