Hallo liebes Ubuntuusers Forum,
ich benutze einen alten Notebook als kleinen Server und Firewall, DHCP DNS das übliche. Der Aufbau ist also Internet->Fritzbox->dieser Server->mein Lan.
Von Zeit zu Zeit gehen beide Netzwerkkarten in einen Fehlerbetrieb in der beide LED der Aktivität immer blinken. Auch am 19" Switch. Der Server ist dann komplett weg und von beiden Netzwerkseiten nicht erreichbar.
Ich gehe dann zu einem Neustart über und gut. Den Fehler hatte ich bei der auch bei der vorrigen Ubuntu LTS Server Version. Dort aber stärker, die Wiederholungen. Es ist hierbei egal ob Traffic läuft oder den halben Tag nichts los ist. Es kann Tagelang gut gehen und dann kommts wieder.
eth0 war/ist die eingebauter Netzwerkanschlus und eth1 früher mal USB zu Fritzbox. Deswegen eth2 (zur Fritzbox) und eth3 (internes Netz). Wie eine (Demilitarized Zone)
Ich denke es ist ein Treiberproblem wo sich was aufhängt. Wer sich das den Adapter ansehen will einfach mal "delock usb netzwerk" eingeben. Was ich sah benutze ich diese Adapter seit 2011. ☺
Gruß
Erich
Hier mal die ein paar Ausgaben: uname -a:
Linux gateway 3.13.0-46-generic #79-Ubuntu SMP Tue Mar 10 20:08:14 UTC 2015 i686 athlon i686 GNU/Linux
ifconfig:
eth2 Link encap:Ethernet Hardware Adresse 00:13:7b:01:11:43 inet Adresse:192.168.252.1 Bcast:192.168.252.255 Maske:255.255.255.0 inet6-Adresse: fe80::213:7bff:fe01:1143/64 Gültigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1 RX-Pakete:35375 Fehler:0 Verloren:0 Überläufe:0 Fenster:0 TX-Pakete:39110 Fehler:60 Verloren:0 Überläufe:0 Träger:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX-Bytes:2697148 (2.6 MB) TX-Bytes:49480780 (49.4 MB) eth3 Link encap:Ethernet Hardware Adresse 00:13:3b:01:05:58 inet Adresse:192.168.2.20 Bcast:192.168.2.255 Maske:255.255.255.0 inet6-Adresse: fe80::213:3bff:fe01:558/64 Gültigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1 RX-Pakete:45334 Fehler:0 Verloren:0 Überläufe:0 Fenster:0 TX-Pakete:28739 Fehler:120 Verloren:0 Überläufe:0 Träger:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX-Bytes:52667950 (52.6 MB) TX-Bytes:2839954 (2.8 MB) lo Link encap:Lokale Schleife inet Adresse:127.0.0.1 Maske:255.0.0.0 inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine UP LOOPBACK RUNNING MTU:65536 Metrik:1 RX-Pakete:862 Fehler:0 Verloren:0 Überläufe:0 Fenster:0 TX-Pakete:862 Fehler:0 Verloren:0 Überläufe:0 Träger:0 Kollisionen:0 Sendewarteschlangenlänge:0 RX-Bytes:112950 (112.9 KB) TX-Bytes:112950 (112.9 KB)
route -n:
Kernel-IP-Routentabelle Ziel Router Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 eth3 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3 192.168.252.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
dmesg (ist ja auch der Inhalt der kern.log vom dem heutigen Tag an dem er sich abkapselte:
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-46-generic (buildd@klock) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #79-Ubuntu SMP Tue Mar 10 20:08:14 UTC 2015 (Ubuntu 3.13.0-46.79-generic 3.13.11-ckt15) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001dfeffff] usable [ 0.000000] BIOS-e820: [mem 0x000000001dff0000-0x000000001dffffbf] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000001dffffc0-0x000000001dffffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] SMBIOS 2.3 present. [ 0.000000] DMI: MiTAC / , BIOS V1.07 01/28/2003 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x1dff0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF ? [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF ? [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EFFFF ? [ 0.000000] F0000-FFFFF ? [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FF0000000 write-back [ 0.000000] 1 base 010000000 mask FF8000000 write-back [ 0.000000] 2 base 018000000 mask FFC000000 write-back [ 0.000000] 3 base 01C000000 mask FFE000000 write-back [ 0.000000] 4 base 0A0000000 mask FFC000000 write-combining [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x1dc00000-0x1ddfffff] [ 0.000000] [mem 0x1dc00000-0x1ddfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1dbfffff] [ 0.000000] [mem 0x1c000000-0x1dbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x1de00000-0x1dfeffff] [ 0.000000] [mem 0x1de00000-0x1dfeffff] page 4k [ 0.000000] BRK [0x01b96000, 0x01b96fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x1d312000-0x1d5b1fff] [ 0.000000] ACPI: RSDP 000e5010 000014 (v00 OID_00) [ 0.000000] ACPI: RSDT 1dfffbc0 000030 (v01 INSYDE RSDT_000 00000001 _CSI 00010100) [ 0.000000] ACPI: FACP 1dfffac0 000074 (v01 INSYDE FACP_000 00000100 _CSI 00010100) [ 0.000000] ACPI: DSDT 1dffa8a0 005215 (v01 INSYDE VT8372 00001000 INTL 02002025) [ 0.000000] ACPI: FACS 1dffffc0 000040 [ 0.000000] ACPI: BOOT 1dfffb50 000028 (v01 INSYDE SYS_BOOT 00000100 _CSI 00010100) [ 0.000000] ACPI: DBGP 1dfffb80 000034 (v01 INSYDE DBGP_000 00000100 _CSI 00010100) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 479MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1dff0000 [ 0.000000] low ram: 0 - 1dff0000 [ 0.000000] BRK [0x01b97000, 0x01b97fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x1dfeffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x1dfeffff] [ 0.000000] On node 0 totalpages: 122766 [ 0.000000] free_area_init_node: node 0, pgdat c199d700, node_mem_map ddc30020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 928 pages used for memmap [ 0.000000] Normal zone: 118768 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] e820: [mem 0x1e000000-0xfff7ffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @ddc1e000 s36160 r0 d21184 u57344 [ 0.000000] pcpu-alloc: s36160 r0 d21184 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121806 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-46-generic root=UUID=9ee5aa21-8c1f-48b8-ae9f-558ccfbb6668 ro [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 982904 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 471156K/491064K available (6548K kernel code, 641K rwdata, 2764K rodata, 876K init, 924K bss, 19908K reserved, 0K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xde7f0000 - 0xffbfe000 ( 532 MB) [ 0.000000] lowmem : 0xc0000000 - 0xddff0000 ( 479 MB) [ 0.000000] .init : 0xc19bb000 - 0xc1a96000 ( 876 kB) [ 0.000000] .data : 0xc16656b4 - 0xc19ba580 (3411 kB) [ 0.000000] .text : 0xc1000000 - 0xc16656b4 (6549 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=dcc08000 soft=dcc0a000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1658.606 MHz processor [ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3317.21 BogoMIPS (lpj=6634424) [ 0.008022] pid_max: default: 32768 minimum: 301 [ 0.008098] Security Framework initialized [ 0.008157] AppArmor: AppArmor initialized [ 0.008165] Yama: becoming mindful. [ 0.008291] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.008302] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.012112] Initializing cgroup subsys memory [ 0.012141] Initializing cgroup subsys devices [ 0.012151] Initializing cgroup subsys freezer [ 0.012159] Initializing cgroup subsys blkio [ 0.012168] Initializing cgroup subsys perf_event [ 0.012178] Initializing cgroup subsys hugetlb [ 0.012241] mce: CPU supports 4 MCE banks [ 0.012283] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.012283] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.012283] tlb_flushall_shift: -1 [ 0.024693] Freeing SMP alternatives memory: 32K (c1a96000 - c1a9e000) [ 0.026499] ACPI: Core revision 20131115 [ 0.030262] ACPI: All ACPI Tables successfully acquired [ 0.030282] ACPI: setting ELCR to 0200 (from 0c20) [ 0.032017] ftrace: allocating 27853 entries in 55 pages [ 0.048286] smpboot: weird, boot CPU (#0) not listed by the BIOS [ 0.048312] smpboot: SMP motherboard not detected [ 0.048319] smpboot: Local APIC not detected. Using dummy APIC emulation. [ 0.048326] smpboot: SMP disabled [ 0.048354] Performance Events: [ 0.048364] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.048371] no hardware sampling interrupt available. [ 0.048379] AMD PMU driver. [ 0.048388] ... version: 0 [ 0.048393] ... bit width: 48 [ 0.048398] ... generic registers: 4 [ 0.048403] ... value mask: 0000ffffffffffff [ 0.048408] ... max period: 00007fffffffffff [ 0.048413] ... fixed-purpose events: 0 [ 0.048418] ... event mask: 000000000000000f [ 0.055059] x86: Booted up 1 node, 1 CPUs [ 0.055086] smpboot: Total of 1 processors activated (3317.21 BogoMIPS) [ 0.055236] NMI watchdog: disabled (cpu0): not supported (no LAPIC?) [ 0.055495] devtmpfs: initialized [ 0.055857] EVM: security.selinux [ 0.055863] EVM: security.SMACK64 [ 0.055867] EVM: security.ima [ 0.055872] EVM: security.capability [ 0.056026] PM: Registering ACPI NVS region [mem 0x1dffffc0-0x1dffffff] (64 bytes) [ 0.058497] pinctrl core: initialized pinctrl subsystem [ 0.058754] regulator-dummy: no parameters [ 0.058815] RTC time: 8:07:07, date: 03/16/15 [ 0.058931] NET: Registered protocol family 16 [ 0.059253] EISA bus registered [ 0.059262] cpuidle: using governor ladder [ 0.059269] cpuidle: using governor menu [ 0.059360] ACPI: bus type PCI registered [ 0.059370] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.059604] PCI: PCI BIOS revision 2.10 entry at 0xe8b24, last bus=1 [ 0.059611] PCI: Using configuration type 1 for base access [ 0.062049] bio: create slab <bio-0> at 0 [ 0.062431] ACPI: Added _OSI(Module Device) [ 0.062440] ACPI: Added _OSI(Processor Device) [ 0.062446] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.062452] ACPI: Added _OSI(Processor Aggregator Device) [ 0.070161] ACPI: Interpreter enabled [ 0.070212] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.070229] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.070262] ACPI: (supports S0 S3 S4 S5) [ 0.070269] ACPI: Using PIC for interrupt routing [ 0.070349] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.070504] ACPI: No dock devices found. [ 0.085090] ACPI: Power Resource [PFAN] (off) [ 0.092193] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.092213] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.092230] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.092413] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.092419] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.092424] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.092428] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000cffff] (ignored) [ 0.092432] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.092436] acpi PNP0A03:00: host bridge window [mem 0xfff80000-0xffffffff] (ignored) [ 0.092440] acpi PNP0A03:00: host bridge window [mem 0x20000000-0xfedfffff] (ignored) [ 0.092445] PCI: root bus 00: using default resources [ 0.092453] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.092686] PCI host bridge to bus 0000:00 [ 0.092698] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.092705] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.092713] pci_bus 0000:00: root bus resource [mem 0x00000000-0x3ffffffff] [ 0.092743] pci 0000:00:00.0: [1106:3156] type 00 class 0x060000 [ 0.092765] pci 0000:00:00.0: reg 0x10: [mem 0xa0000000-0xa3ffffff pref] [ 0.092931] pci 0000:00:01.0: [1106:b091] type 01 class 0x060400 [ 0.092983] pci 0000:00:01.0: supports D1 [ 0.093110] pci 0000:00:09.0: [1524:1410] type 02 class 0x060700 [ 0.093130] pci 0000:00:09.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 0.093160] pci 0000:00:09.0: supports D1 D2 [ 0.093164] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.093288] pci 0000:00:0b.0: [1106:3044] type 00 class 0x0c0010 [ 0.093308] pci 0000:00:0b.0: reg 0x10: [mem 0xfedff800-0xfedfffff] [ 0.093320] pci 0000:00:0b.0: reg 0x14: [io 0xff00-0xff7f] [ 0.093385] pci 0000:00:0b.0: supports D2 [ 0.093389] pci 0000:00:0b.0: PME# supported from D2 D3hot D3cold [ 0.096039] pci 0000:00:0b.0: System wakeup disabled by ACPI [ 0.096116] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300 [ 0.096162] pci 0000:00:10.0: reg 0x20: [io 0x1200-0x121f] [ 0.096204] pci 0000:00:10.0: supports D1 D2 [ 0.096208] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.096264] pci 0000:00:10.0: System wakeup disabled by ACPI [ 0.096340] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300 [ 0.096385] pci 0000:00:10.1: reg 0x20: [io 0x1300-0x131f] [ 0.096427] pci 0000:00:10.1: supports D1 D2 [ 0.096431] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.096486] pci 0000:00:10.1: System wakeup disabled by ACPI [ 0.096563] pci 0000:00:10.3: [1106:3104] type 00 class 0x0c0320 [ 0.096582] pci 0000:00:10.3: reg 0x10: [mem 0xf0000000-0xf00000ff] [ 0.096650] pci 0000:00:10.3: supports D1 D2 [ 0.096655] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.096710] pci 0000:00:10.3: System wakeup disabled by ACPI [ 0.096805] pci 0000:00:11.0: [1106:3177] type 00 class 0x060100 [ 0.096866] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.096883] pci 0000:00:11.0: address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000] [ 0.096896] pci 0000:00:11.0: quirk: [io 0x1400-0x140f] claimed by vt8235 SMB [ 0.097030] pci 0000:00:11.1: [1106:0571] type 00 class 0x01018a [ 0.097079] pci 0000:00:11.1: reg 0x20: [io 0x1100-0x110f] [ 0.097219] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100 [ 0.097239] pci 0000:00:11.5: reg 0x10: [io 0xe100-0xe1ff] [ 0.097310] pci 0000:00:11.5: supports D1 D2 [ 0.097363] pci 0000:00:11.5: System wakeup disabled by ACPI [ 0.097435] pci 0000:00:11.6: [1106:3068] type 00 class 0x078000 [ 0.097455] pci 0000:00:11.6: reg 0x10: [io 0xe200-0xe2ff] [ 0.097527] pci 0000:00:11.6: supports D1 D2 [ 0.097581] pci 0000:00:11.6: System wakeup disabled by ACPI [ 0.097654] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000 [ 0.097673] pci 0000:00:12.0: reg 0x10: [io 0xe300-0xe3ff] [ 0.097684] pci 0000:00:12.0: reg 0x14: [mem 0xf0000100-0xf00001ff] [ 0.097747] pci 0000:00:12.0: supports D1 D2 [ 0.097751] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.097808] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.097966] pci 0000:01:00.0: [5333:8d04] type 00 class 0x030000 [ 0.097985] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xe007ffff] [ 0.097996] pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x97ffffff pref] [ 0.098029] pci 0000:01:00.0: reg 0x30: [mem 0x000c0000-0x000cffff pref] [ 0.098059] pci 0000:01:00.0: supports D1 D2 [ 0.098142] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.098154] pci 0000:00:01.0: bridge window [io 0xc000-0xdfff] [ 0.098160] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff] [ 0.098166] pci 0000:00:01.0: bridge window [mem 0x90000000-0x9fffffff pref] [ 0.098175] pci 0000:00:09.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.098251] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05 [ 0.098259] pci_bus 0000:00: on NUMA node 0 [ 0.098994] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11) [ 0.099126] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11) [ 0.099249] ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11) [ 0.099371] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11) [ 0.099583] ACPI: \_SB_.PCI0: notify handler is installed [ 0.099618] Found 1 acpi root devices [ 0.099708] ACPI : EC: GPE = 0x5, I/O: command/status = 0x66, data = 0x62 [ 0.100068] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.100078] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.100085] vgaarb: loaded [ 0.100091] vgaarb: bridge control possible 0000:01:00.0 [ 0.100617] SCSI subsystem initialized [ 0.100765] libata version 3.00 loaded. [ 0.100819] ACPI: bus type USB registered [ 0.100883] usbcore: registered new interface driver usbfs [ 0.100907] usbcore: registered new interface driver hub [ 0.100965] usbcore: registered new device driver usb [ 0.101229] PCI: Using ACPI for IRQ routing [ 0.101241] PCI: pci_cache_line_size set to 32 bytes [ 0.101301] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.101307] e820: reserve RAM buffer [mem 0x1dff0000-0x1fffffff] [ 0.101540] NetLabel: Initializing [ 0.101547] NetLabel: domain hash size = 128 [ 0.101552] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.101586] NetLabel: unlabeled traffic allowed by default [ 0.101830] Switched to clocksource pit [ 0.115866] AppArmor: AppArmor Filesystem Enabled [ 0.116007] pnp: PnP ACPI init [ 0.116058] ACPI: bus type PNP registered [ 0.119777] pnp 00:00: Plug and Play ACPI device, IDs PNP0f03 (active) [ 0.119834] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.119898] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.119952] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.120074] system 00:04: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.120088] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.120112] pnp 00:05: [dma 4] [ 0.120163] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.120324] system 00:06: [io 0x0330-0x0331] has been reserved [ 0.120335] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.120344] system 00:06: [io 0x1000-0x107f] could not be reserved [ 0.120353] system 00:06: [io 0x1400-0x140f] has been reserved [ 0.120361] system 00:06: [io 0x1600-0x167f] has been reserved [ 0.120370] system 00:06: [mem 0x1e000000-0x1fffffff] could not be reserved [ 0.120380] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.120439] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.120844] pnp 00:08: [dma 3] [ 0.120993] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.121335] pnp 00:09: [dma 5] [ 0.121512] pnp 00:09: Plug and Play ACPI device, IDs VIA3076 (active) [ 0.121657] pnp: PnP ACPI: found 10 devices [ 0.121664] ACPI: bus type PNP unregistered [ 0.121674] PnPBIOS: Disabled by ACPI PNP [ 0.159577] Switched to clocksource acpi_pm [ 0.159620] pci 0000:01:00.0: no compatible bridge window for [mem 0x000c0000-0x000cffff pref] [ 0.159673] pci 0000:00:11.0: BAR 13: [io 0x1000-0x107f] has bogus alignment [ 0.159688] pci 0000:00:09.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.159693] pci 0000:00:09.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 [ 0.159698] pci 0000:00:09.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.159702] pci 0000:00:09.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.159719] pci 0000:00:09.0: BAR 0: assigned [mem 0x20000000-0x20000fff] [ 0.159735] pci 0000:00:09.0: BAR 15: assigned [mem 0x24000000-0x27ffffff pref] [ 0.159746] pci 0000:00:09.0: BAR 16: assigned [mem 0x28000000-0x2bffffff] [ 0.159758] pci 0000:00:09.0: BAR 13: assigned [io 0x1800-0x18ff] [ 0.159768] pci 0000:00:09.0: BAR 14: assigned [io 0x1c00-0x1cff] [ 0.159780] pci 0000:01:00.0: BAR 6: assigned [mem 0x98000000-0x9800ffff pref] [ 0.159790] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.159799] pci 0000:00:01.0: bridge window [io 0xc000-0xdfff] [ 0.159809] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff] [ 0.159818] pci 0000:00:01.0: bridge window [mem 0x90000000-0x9fffffff pref] [ 0.159830] pci 0000:00:09.0: CardBus bridge to [bus 02-05] [ 0.159837] pci 0000:00:09.0: bridge window [io 0x1800-0x18ff] [ 0.159847] pci 0000:00:09.0: bridge window [io 0x1c00-0x1cff] [ 0.159856] pci 0000:00:09.0: bridge window [mem 0x24000000-0x27ffffff pref] [ 0.159867] pci 0000:00:09.0: bridge window [mem 0x28000000-0x2bffffff] [ 0.159878] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.159882] pci_bus 0000:00: resource 5 [mem 0x00000000-0x3ffffffff] [ 0.159887] pci_bus 0000:01: resource 0 [io 0xc000-0xdfff] [ 0.159891] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xefffffff] [ 0.159895] pci_bus 0000:01: resource 2 [mem 0x90000000-0x9fffffff pref] [ 0.159900] pci_bus 0000:02: resource 0 [io 0x1800-0x18ff] [ 0.159904] pci_bus 0000:02: resource 1 [io 0x1c00-0x1cff] [ 0.159908] pci_bus 0000:02: resource 2 [mem 0x24000000-0x27ffffff pref] [ 0.159912] pci_bus 0000:02: resource 3 [mem 0x28000000-0x2bffffff] [ 0.160041] NET: Registered protocol family 2 [ 0.160585] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.160638] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.160728] TCP: Hash tables configured (established 4096 bind 4096) [ 0.160821] TCP: reno registered [ 0.160830] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.160855] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.161003] NET: Registered protocol family 1 [ 0.161045] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.161396] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 0.161405] PCI: setting IRQ 10 as level-triggered [ 0.161628] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 0.161636] PCI: setting IRQ 11 as level-triggered [ 0.161849] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.161955] pci 0000:01:00.0: Video device with shadowed ROM [ 0.161960] PCI: CLS 32 bytes, default 32 [ 0.162120] Trying to unpack rootfs image as initramfs... [ 0.274250] Freeing initrd memory: 2688K (dd312000 - dd5b2000) [ 0.274442] Simple Boot Flag at 0x37 set to 0x1 [ 0.274658] microcode: AMD CPU family 0x6 not supported [ 0.274666] Scanning for low memory corruption every 60 seconds [ 0.275346] Initialise system trusted keyring [ 0.275457] audit: initializing netlink socket (disabled) [ 0.275499] type=2000 audit(1426493227.271:1): initialized [ 0.311470] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.313896] zbud: loaded [ 0.314103] VFS: Disk quotas dquot_6.5.2 [ 0.314214] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.315232] fuse init (API version 7.22) [ 0.315393] msgmni has been set to 925 [ 0.315543] Key type big_key registered [ 0.316258] Key type asymmetric registered [ 0.316269] Asymmetric key parser 'x509' registered [ 0.316365] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.316436] io scheduler noop registered [ 0.316445] io scheduler deadline registered (default) [ 0.316510] io scheduler cfq registered [ 0.316761] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.316813] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.316924] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 0.316932] vesafb: scrolling: redraw [ 0.316939] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.317083] vesafb: framebuffer at 0x90000000, mapped to 0xde800000, using 1216k, total 1216k [ 0.354777] Console: switching to colour frame buffer device 80x30 [ 0.393304] fb0: VESA VGA frame buffer device [ 0.394155] ipmi message handler version 39.2 [ 0.397724] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.399619] ACPI: AC Adapter [AC] (on-line) [ 0.422633] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 0.469384] ACPI: Sleep Button [SBTN] [ 0.492794] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.548047] ACPI: Lid Switch [LID] [ 0.571892] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.620589] ACPI: Power Button [PWRF] [ 0.648101] ACPI: Fan [FAN0] (off) [ 0.672881] tsc: Marking TSC unstable due to TSC halts in idle [ 0.698183] ACPI: acpi_idle registered with cpuidle [ 0.719643] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.744832] ACPI: Thermal Zone [THRM] (45 C) [ 0.769579] GHES: HEST is not enabled! [ 0.794303] isapnp: Scanning for PnP cards... [ 0.824572] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.875952] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.948403] Linux agpgart interface v0.103 [ 0.974197] ACPI: Battery Slot [BAT0] (battery absent) [ 1.000199] agpgart: Detected VIA Apollo Pro266 chipset [ 1.075591] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xa0000000 [ 1.148202] brd: module loaded [ 1.175102] loop: module loaded [ 1.244634] libphy: Fixed MDIO Bus: probed [ 1.313006] tun: Universal TUN/TAP device driver, 1.6 [ 1.337880] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 1.449802] isapnp: No Plug & Play device found [ 1.474403] PPP generic driver version 2.4.2 [ 1.498908] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.523577] ehci-pci: EHCI PCI platform driver [ 1.547733] ehci-pci 0000:00:10.3: EHCI Host Controller [ 1.571942] ehci-pci 0000:00:10.3: new USB bus registered, assigned bus number 1 [ 1.618849] ehci-pci 0000:00:10.3: irq 11, io mem 0xf0000000 [ 1.652064] ehci-pci 0000:00:10.3: USB 2.0 started, EHCI 1.00 [ 1.675584] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.699040] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.745779] usb usb1: Product: EHCI Host Controller [ 1.769691] usb usb1: Manufacturer: Linux 3.13.0-46-generic ehci_hcd [ 1.793760] usb usb1: SerialNumber: 0000:00:10.3 [ 1.817804] hub 1-0:1.0: USB hub found [ 1.841520] hub 1-0:1.0: 4 ports detected [ 1.865174] ehci-platform: EHCI generic platform driver [ 1.888543] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.911768] ohci-pci: OHCI PCI platform driver [ 1.934473] ohci-platform: OHCI generic platform driver [ 1.957017] uhci_hcd: USB Universal Host Controller Interface driver [ 1.980268] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 2.003059] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 2.047998] uhci_hcd 0000:00:10.0: irq 10, io base 0x00001200 [ 2.071504] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.095610] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.142873] usb usb2: Product: UHCI Host Controller [ 2.166651] usb usb2: Manufacturer: Linux 3.13.0-46-generic uhci_hcd [ 2.190857] usb usb2: SerialNumber: 0000:00:10.0 [ 2.214829] hub 2-0:1.0: USB hub found [ 2.238063] hub 2-0:1.0: 2 ports detected [ 2.261340] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 2.284784] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 2.330151] uhci_hcd 0000:00:10.1: irq 11, io base 0x00001300 [ 2.353829] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.377594] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.423970] usb usb3: Product: UHCI Host Controller [ 2.447399] usb usb3: Manufacturer: Linux 3.13.0-46-generic uhci_hcd [ 2.471084] usb usb3: SerialNumber: 0000:00:10.1 [ 2.494821] hub 3-0:1.0: USB hub found [ 2.518040] hub 3-0:1.0: 2 ports detected [ 2.541662] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 2.600514] i8042: Detected active multiplexing controller, rev 1.1 [ 2.633163] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.657691] usb 1-3: new high-speed USB device number 3 using ehci-pci [ 2.682556] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 2.707316] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 2.731495] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 2.754768] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 2.777542] mousedev: PS/2 mouse device common for all mice [ 2.800185] rtc_cmos 00:02: RTC can wake from S4 [ 2.822954] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.844995] rtc_cmos 00:02: alarms up to one year, y3k, 242 bytes nvram [ 2.867234] device-mapper: uevent: version 1.0.3 [ 2.889314] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 2.933788] platform eisa.0: Probing EISA bus 0 [ 2.956778] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 2.980049] platform eisa.0: EISA: Detected 0 cards [ 3.002997] cpufreq-nforce2: No nForce2 chipset. [ 3.025548] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 3.070882] ledtrig-cpu: registered to indicate activity on CPUs [ 3.094524] TCP: cubic registered [ 3.121526] NET: Registered protocol family 10 [ 3.144891] usb 1-3: New USB device found, idVendor=9710, idProduct=7830 [ 3.168098] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.191393] usb 1-3: Product: USB-MAC Controller [ 3.214560] usb 1-3: Manufacturer: Moschip Semiconductor [ 3.238125] usb 1-3: SerialNumber: 7b011143 [ 3.261798] NET: Registered protocol family 17 [ 3.284483] Key type dns_resolver registered [ 3.307007] Using IPI No-Shortcut mode [ 3.328858] Loading compiled-in X.509 certificates [ 3.357996] Loaded X.509 cert 'Magrathea: Glacier signing key: 6b0c44f370561e180c946f75fe6df227335d49d4' [ 3.403418] registered taskstats version 1 [ 3.432230] Key type trusted registered [ 3.456145] usb 1-4: new high-speed USB device number 4 using ehci-pci [ 3.490559] Key type encrypted registered [ 3.514451] AppArmor: AppArmor sha1 policy hashing enabled [ 3.538626] IMA: No TPM chip found, activating TPM-bypass! [ 3.563460] regulator-dummy: disabling [ 3.587340] Magic number: 7:95:119 [ 3.610995] rtc_cmos 00:02: setting system clock to 2015-03-16 08:07:11 UTC (1426493231) [ 3.660333] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.684716] EDD information not available. [ 3.708999] PM: Hibernation image not present or could not be loaded. [ 3.711187] Freeing unused kernel memory: 876K (c19bb000 - c1a96000) [ 3.736195] Write protecting the kernel text: 6552k [ 3.760602] Write protecting the kernel read-only data: 2768k [ 3.792885] usb 1-4: New USB device found, idVendor=9710, idProduct=7830 [ 3.816867] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.840742] usb 1-4: Product: USB-MAC Controller [ 3.864601] usb 1-4: Manufacturer: Moschip Semiconductor [ 3.888189] usb 1-4: SerialNumber: 3b010558 [ 3.965147] systemd-udevd[90]: starting version 204 [ 4.045155] pata_via 0000:00:11.1: version 0.3.4 [ 4.045252] pata_via 0000:00:11.1: can't derive routing for PCI INT A [ 4.154200] scsi0 : pata_via [ 4.203293] scsi1 : pata_via [ 4.236151] usb 2-1: new full-speed USB device number 2 using uhci_hcd [ 4.275129] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14 [ 4.299740] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15 [ 4.484561] ata1.00: ATA-5: HITACHI_DK23DA-20, 00J2A0A1, max UDMA/100 [ 4.508315] ata1.00: 39070080 sectors, multi 16: LBA [ 4.540419] ata1.00: configured for UDMA/100 [ 4.563964] scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23DA-2 00J2 PQ: 0 ANSI: 5 [ 4.611300] sd 0:0:0:0: [sda] 39070080 512-byte logical blocks: (20.0 GB/18.6 GiB) [ 4.659608] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.684969] sd 0:0:0:0: [sda] Write Protect is off [ 4.709217] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.709286] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.764057] usb 2-1: New USB device found, idVendor=03f0, idProduct=6204 [ 4.788648] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.813040] usb 2-1: Product: deskjet 5100 [ 4.836892] usb 2-1: Manufacturer: hp [ 4.860684] usb 2-1: SerialNumber: MY35P1J0ZP7A [ 4.892465] ata2.00: ATAPI: CD-W24E, 1.0A, max MWDMA2 [ 4.916278] sda: sda1 sda2 < sda5 > [ 4.940612] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.964089] ata2.00: configured for MWDMA2 [ 4.990744] scsi 1:0:0:0: CD-ROM TEAC CD-W24E 1.0A PQ: 0 ANSI: 5 [ 5.041160] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 5.064647] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.088696] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 5.089095] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.874716] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 6.642001] random: nonblocking pool is initialized [ 37.177518] Adding 489468k swap on /dev/sda5. Priority:-1 extents:1 across:489468k FS [ 39.785698] systemd-udevd[281]: starting version 204 [ 39.792194] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 40.405706] lp: driver loaded but no devices found [ 40.548090] ppdev: user-space parallel port driver [ 40.629804] parport_pc 00:08: reported by Plug and Play ACPI [ 40.629876] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 40.716494] lp0: using parport0 (interrupt-driven). [ 41.422436] FS-Cache: Loaded [ 41.656455] RPC: Registered named UNIX socket transport module. [ 41.656466] RPC: Registered udp transport module. [ 41.656469] RPC: Registered tcp transport module. [ 41.656471] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 41.965904] FS-Cache: Netfs 'nfs' registered for caching [ 42.404389] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 43.284910] init: idmapd main process (386) terminated with status 1 [ 43.284954] init: idmapd main process ended, respawning [ 43.687670] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 43.689445] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input8 [ 44.019349] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 44.033433] usb 1-3: applying rev.C fixup [ 44.046074] usb 1-3: applying rev.C fixup [ 44.052801] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker [ 44.053584] MOSCHIP usb-ethernet driver 1-3:1.0 eth0: register 'MOSCHIP usb-ethernet driver' at usb-0000:00:10.3-3, MOSCHIP 7830/7832/7730 usb-NET adapter, 00:13:7b:01:11:43 [ 44.064732] via-rhine 0000:00:12.0 eth1: VIA Rhine II at 0xf0000100, 00:40:d0:3a:73:8e, IRQ 10 [ 44.065506] via-rhine 0000:00:12.0 eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000 [ 44.068610] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 [ 44.068623] PCI: setting IRQ 5 as level-triggered [ 44.082432] usb 1-4: applying rev.C fixup [ 44.088196] usb 1-4: applying rev.C fixup [ 44.129866] MOSCHIP usb-ethernet driver 1-4:1.0 eth2: register 'MOSCHIP usb-ethernet driver' at usb-0000:00:10.3-4, MOSCHIP 7830/7832/7730 usb-NET adapter, 00:13:3b:01:05:58 [ 44.132208] firewire_ohci 0000:00:0b.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 44.134860] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 44.180305] NET: Registered protocol family 23 [ 44.326734] via-ircc 0000:00:11.0: device not available (can't reserve [io 0x1000-0x107f]) [ 44.447917] WARNING! power/level is deprecated; use power/control instead [ 44.633707] firewire_core 0000:00:0b.0: created device fw0: GUID 0040d001001231ad, S400 [ 44.775208] usblp 2-1:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6204 [ 44.775316] usbcore: registered new interface driver usblp [ 44.900220] yenta_cardbus 0000:00:09.0: CardBus bridge found [1071:8375] [ 44.900250] yenta_cardbus 0000:00:09.0: Enabling burst memory read transactions [ 44.900257] yenta_cardbus 0000:00:09.0: Using CSCINT to route CSC interrupts to PCI [ 44.900261] yenta_cardbus 0000:00:09.0: Routing CardBus interrupts to PCI [ 44.900267] yenta_cardbus 0000:00:09.0: TI: mfunc 0x010c1672, devctl 0x44 [ 45.132469] yenta_cardbus 0000:00:09.0: ISA IRQ mask 0x0000, PCI irq 11 [ 45.132481] yenta_cardbus 0000:00:09.0: Socket status: 30000006 [ 45.172096] ACPI Warning: 0x00001400-0x00001407 SystemIO conflicts with Region \SM06 1 (20131115/utaddress-251) [ 45.172119] ACPI Warning: 0x00001400-0x00001407 SystemIO conflicts with Region \SM05 2 (20131115/utaddress-251) [ 45.172125] ACPI Warning: 0x00001400-0x00001407 SystemIO conflicts with Region \SM04 3 (20131115/utaddress-251) [ 45.172131] ACPI Warning: 0x00001400-0x00001407 SystemIO conflicts with Region \SM03 4 (20131115/utaddress-251) [ 45.172137] ACPI Warning: 0x00001400-0x00001407 SystemIO conflicts with Region \SM02 5 (20131115/utaddress-251) [ 45.172143] ACPI Warning: 0x00001400-0x00001407 SystemIO conflicts with Region \SM00 6 (20131115/utaddress-251) [ 45.172150] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 45.508345] powernow: PowerNOW! Technology present. Can scale: frequency and voltage. [ 45.519778] powernow: SGTC: 13333 [ 45.519789] powernow: Minimum speed 663 MHz. Maximum speed 1658 MHz. [ 45.702992] psmouse serio3: synaptics: Touchpad model: 1, fw: 5.1, id: 0x8f40b1, caps: 0x80471b/0x0/0x0, board id: 3655, fw id: 4797570 [ 45.767700] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input11 [ 47.251937] type=1400 audit(1426493275.136:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=500 comm="apparmor_parser" [ 47.251963] type=1400 audit(1426493275.136:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=500 comm="apparmor_parser" [ 47.251973] type=1400 audit(1426493275.136:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=500 comm="apparmor_parser" [ 47.255411] type=1400 audit(1426493275.140:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=500 comm="apparmor_parser" [ 47.255439] type=1400 audit(1426493275.140:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=500 comm="apparmor_parser" [ 47.255948] type=1400 audit(1426493275.140:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=500 comm="apparmor_parser" [ 47.257941] type=1400 audit(1426493275.144:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=498 comm="apparmor_parser" [ 47.257966] type=1400 audit(1426493275.144:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=498 comm="apparmor_parser" [ 47.268906] type=1400 audit(1426493275.156:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=498 comm="apparmor_parser" [ 47.290171] type=1400 audit(1426493275.176:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=504 comm="apparmor_parser" [ 47.949314] systemd-udevd[407]: renamed network interface eth0 to rename2 [ 47.964354] systemd-udevd[409]: renamed network interface eth1 to eth0 [ 47.976378] systemd-udevd[399]: renamed network interface eth2 to eth3 [ 48.004597] systemd-udevd[407]: renamed network interface rename2 to eth2 [ 48.531212] init: munin-node main process (577) terminated with status 127 [ 48.531260] init: munin-node main process ended, respawning [ 48.960784] init: cups main process (505) killed by HUP signal [ 48.960823] init: cups main process ended, respawning [ 49.819993] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE [ 49.894348] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 49.896162] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 51.371268] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 51.376084] IPv6: ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready [ 73.150697] init: failsafe main process (536) killed by TERM signal [ 73.564002] type=1400 audit(1426493301.447:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1409 comm="apparmor_parser" [ 73.564131] type=1400 audit(1426493301.451:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1409 comm="apparmor_parser" [ 73.564147] type=1400 audit(1426493301.451:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1409 comm="apparmor_parser" [ 73.565643] type=1400 audit(1426493301.451:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1409 comm="apparmor_parser" [ 73.565669] type=1400 audit(1426493301.451:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1409 comm="apparmor_parser" [ 73.566261] type=1400 audit(1426493301.451:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1409 comm="apparmor_parser" [ 73.620595] type=1400 audit(1426493301.507:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=1410 comm="apparmor_parser" [ 73.628626] type=1400 audit(1426493301.515:19): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1411 comm="apparmor_parser" [ 73.639270] type=1400 audit(1426493301.523:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1412 comm="apparmor_parser" [ 73.639301] type=1400 audit(1426493301.523:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1412 comm="apparmor_parser" [ 95.290098] ip_tables: (C) 2000-2006 Netfilter Core Team [ 95.426791] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 95.628243] nf_conntrack version 0.5.0 (7418 buckets, 29672 max) [ 102.126235] audit_printk_skb: 36 callbacks suppressed [ 102.126251] type=1400 audit(1426493330.415:34): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2252 comm="apparmor_parser" [ 102.126275] type=1400 audit(1426493330.415:35): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2252 comm="apparmor_parser" [ 102.127298] type=1400 audit(1426493330.415:36): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2252 comm="apparmor_parser" [ 102.956488] init: shairport main process (2275) terminated with status 1 [ 104.040257] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 104.052943] NFSD: starting 90-second grace period (net c1994140) [ 118.699985] init: plymouth-upstart-bridge main process ended, respawning [27307.008064] ------------[ cut here ]------------ [27307.008113] WARNING: CPU: 0 PID: 0 at /build/buildd/linux-3.13.0/net/sched/sch_generic.c:264 dev_watchdog+0x1f4/0x200() [27307.008122] NETDEV WATCHDOG: eth3 (MOSCHIP usb-ethernet driver): transmit queue 0 timed out [27307.008129] Modules linked in: xt_mac ipt_MASQUERADE xt_REDIRECT xt_tcpudp xt_conntrack iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle ip6table_filter ip6_tables iptable_filter ip_tables x_tables joydev powernow_k7 pcmcia snd_via82xx snd_via82xx_modem snd_mpu401_uart i2c_viapro snd_ac97_codec ac97_bus gameport snd_pcm usblp snd_page_alloc snd_seq_midi psmouse snd_seq_midi_event serio_raw snd_rawmidi yenta_socket snd_seq via_ircc pcmcia_rsrc snd_seq_device snd_timer pcmcia_core irda snd firewire_ohci via_rhine soundcore crc_ccitt shpchp mcs7830 usbnet firewire_core mii crc_itu_t video mac_hid nfsd auth_rpcgss nfs_acl nfs lockd sunrpc fscache parport_pc ppdev lp parport pata_acpi pata_via [27307.008293] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.13.0-46-generic #79-Ubuntu [27307.008302] Hardware name: MiTAC / , BIOS V1.07 01/28/2003 [27307.008309] 00000000 00000000 dcc0bec0 c1655dd2 dcc0bf00 dcc0bef0 c1056a5e c18cf50c [27307.008328] dcc0bf1c 00000000 c18cf548 00000108 c1593f44 c1593f44 00000000 cde6e800 [27307.008344] fffffd5f dcc0bf08 c1056ab3 00000009 dcc0bf00 c18cf50c dcc0bf1c dcc0bf40 [27307.008362] Call Trace: [27307.008384] [<c1655dd2>] dump_stack+0x41/0x52 [27307.008404] [<c1056a5e>] warn_slowpath_common+0x7e/0xa0 [27307.008417] [<c1593f44>] ? dev_watchdog+0x1f4/0x200 [27307.008428] [<c1593f44>] ? dev_watchdog+0x1f4/0x200 [27307.008441] [<c1056ab3>] warn_slowpath_fmt+0x33/0x40 [27307.008452] [<c1593f44>] dev_watchdog+0x1f4/0x200 [27307.008479] [<c1061fb0>] call_timer_fn+0x30/0xf0 [27307.008491] [<c106225f>] ? cascade+0x5f/0x80 [27307.008503] [<c1593d50>] ? dev_graft_qdisc+0x70/0x70 [27307.008517] [<c1062fa4>] run_timer_softirq+0x174/0x250 [27307.008528] [<c1593d50>] ? dev_graft_qdisc+0x70/0x70 [27307.008540] [<c105b738>] __do_softirq+0xc8/0x220 [27307.008552] [<c105b670>] ? cpu_callback+0x160/0x160 [27307.008558] <IRQ> [<c105bb45>] ? irq_exit+0x95/0xa0 [27307.008578] [<c1664875>] ? do_IRQ+0x45/0xb0 [27307.008595] [<c1085425>] ? sched_clock_local+0x45/0x140 [27307.008606] [<c1664633>] ? common_interrupt+0x33/0x38 [27307.008623] [<c1533a8e>] ? cpuidle_enter_state+0x3e/0xd0 [27307.008634] [<c1533bb5>] ? cpuidle_idle_call+0x95/0x1c0 [27307.008651] [<c101756d>] ? arch_cpu_idle+0xd/0x30 [27307.008668] [<c10a58d9>] ? cpu_startup_entry+0x1c9/0x210 [27307.008687] [<c164c0b2>] ? rest_init+0x62/0x70 [27307.008709] [<c19bbaf1>] ? start_kernel+0x3b3/0x3b9 [27307.008721] [<c19bb575>] ? repair_env_string+0x51/0x51 [27307.008734] [<c19bb39c>] ? i386_start_kernel+0x137/0x13a [27307.008742] ---[ end trace b29ccfc817394bdb ]---
lsusb:
Bus 001 Device 004: ID 9710:7830 MosChip Semiconductor MCS7830 10/100 Mbps Ethernet adapter Bus 001 Device 003: ID 9710:7830 MosChip Semiconductor MCS7830 10/100 Mbps Ethernet adapter Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 03f0:6204 Hewlett-Packard DeskJet 5150c Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
lsusb -v (wo er den Fehler hatte, hier stehen auch Fehler drin):
Bus 001 Device 004: ID 9710:7830 MosChip Semiconductor MCS7830 10/100 Mbps Ethernet adapter Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 0 bDeviceProtocol 255 bMaxPacketSize0 64 idVendor 0x9710 MosChip Semiconductor idProduct 0x7830 MCS7830 10/100 Mbps Ethernet adapter bcdDevice 1.00 iManufacturer 1 (error) iProduct 2 (error) iSerial 3 (error) bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 255 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 255 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 1 Device Status: 0x0486 (Bus Powered) Remote Wakeup Enabled Test Mode Bus 001 Device 003: ID 9710:7830 MosChip Semiconductor MCS7830 10/100 Mbps Ethernet adapter Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 0 bDeviceProtocol 255 bMaxPacketSize0 64 idVendor 0x9710 MosChip Semiconductor idProduct 0x7830 MCS7830 10/100 Mbps Ethernet adapter bcdDevice 1.00 iManufacturer 1 (error) iProduct 2 (error) iSerial 3 (error) bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 255 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 255 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 1 Device Status: 0x0000 (Bus Powered) Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.13 iManufacturer 3 Linux 3.13.0-46-generic ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 0000:00:10.3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0503 highspeed power enable connect Port 4: 0000.0503 highspeed power enable connect Device Status: 0x0001 Self Powered Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.13 iManufacturer 3 Linux 3.13.0-46-generic uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:10.1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0001 Self Powered Bus 002 Device 002: ID 03f0:6204 Hewlett-Packard DeskJet 5150c Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x03f0 Hewlett-Packard idProduct 0x6204 DeskJet 5150c bcdDevice 1.00 iManufacturer 1 hp iProduct 2 deskjet 5100 iSerial 3 MY35P1J0ZP7A bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 7 Printer bInterfaceSubClass 1 Printer bInterfaceProtocol 2 Bidirectional iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0001 Self Powered Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.13 iManufacturer 3 Linux 3.13.0-46-generic uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:10.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0103 power enable connect Port 2: 0000.0100 power Device Status: 0x0001 Self Powered
lsusb -v (im normalen Betrieb):
Bus 002 Device 003: ID 9710:7830 MosChip Semiconductor MCS7830 10/100 Mbps Ethernet adapter Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 0 bDeviceProtocol 255 bMaxPacketSize0 64 idVendor 0x9710 MosChip Semiconductor idProduct 0x7830 MCS7830 10/100 Mbps Ethernet adapter bcdDevice 1.00 iManufacturer 1 Moschip Semiconductor iProduct 2 USB-MAC Controller iSerial 3 3b010558 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 255 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 255 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 0 bDeviceProtocol 255 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Bus 002 Device 002: ID 9710:7830 MosChip Semiconductor MCS7830 10/100 Mbps Ethernet adapter Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 0 bDeviceProtocol 255 bMaxPacketSize0 64 idVendor 0x9710 MosChip Semiconductor idProduct 0x7830 MCS7830 10/100 Mbps Ethernet adapter bcdDevice 1.00 iManufacturer 1 Moschip Semiconductor iProduct 2 USB-MAC Controller iSerial 3 7b011143 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 255 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 255 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 0 bDeviceProtocol 255 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.13 iManufacturer 3 Linux 3.13.0-46-generic uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:10.1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0103 power enable connect Port 2: 0000.0103 power enable connect Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 03f0:6204 Hewlett-Packard DeskJet 5150c Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x03f0 Hewlett-Packard idProduct 0x6204 DeskJet 5150c bcdDevice 1.00 iManufacturer 1 hp iProduct 2 deskjet 5100 iSerial 3 MY35P1J0ZP7A bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 7 Printer bInterfaceSubClass 1 Printer bInterfaceProtocol 2 Bidirectional iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.13 iManufacturer 3 Linux 3.13.0-46-generic uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:10.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0103 power enable connect Port 2: 0000.0100 power Device Status: 0x0001 Self Powered