god_of_emptiness
Anmeldungsdatum: 31. Mai 2007
Beiträge: 186
|
Hallo, wenn ich auf meinem Thinkpad T60p Sound über meinen USB-DAC höre, hakt der Sound beim Scrollen, Arbeitsfläche umschalten, etc.
Wenn ich über die Audiobuchse höre, passiert das nicht.
Das Phänomen ist mir vor ca. 1.5 Jahren aufgefallen.
PulseAudio wird verwendet. | lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 17.04
Release: 17.04
Codename: zesty
|
| uname -a
Linux T60p 4.10.0-32-generic #36-Ubuntu SMP Tue Aug 8 12:09:08 UTC 2017 i686 i686 i686 GNU/Linux
|
Bye
Marcus
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Hi,was für eine USB Soundkarte ist es denn? aplay -l sudo lshw -short -quiet pulseaudio --dump-conf mal in einen andere USB Port gesteckt?
|
god_of_emptiness
(Themenstarter)
Anmeldungsdatum: 31. Mai 2007
Beiträge: 186
|
Es ist ein Denon DA-300USB.
Der funtioniert an meinem PC ohne Probleme.
Ein anderer USB-Port bring auch keine Lösung. | marcus@T60p:~$ aplay -l
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: Intel [HDA Intel], Gerät 0: AD1981 Analog [AD1981 Analog]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 0: Intel [HDA Intel], Gerät 1: AD1981 Digital [AD1981 Digital]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: DA300USB [DA-300USB], Gerät 0: USB Audio [USB Audio]
Sub-Geräte: 0/1
Sub-Gerät #0: subdevice #0
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56 | marcus@T60p:~$ sudo lshw -short -quiet
[sudo] Passwort für marcus:
H/W-Pfad Gerät Klasse Beschreibung
=====================================================
system 2007FHG
/0 bus 2007FHG
/0/0 memory 144KiB BIOS
/0/6 processor Genuine Intel(R) CPU T2500 @ 2.00GHz
/0/6/a memory 64KiB L1 Cache
/0/6/c memory 2MiB L2 Cache
/0/6/0.1 processor Logische CPU
/0/6/0.2 processor Logische CPU
/0/b memory 64KiB L1 Cache
/0/29 memory 3GiB Systemspeicher
/0/29/0 memory 1GiB SODIMM DDR2 Synchron
/0/29/1 memory 2GiB SODIMM DDR2 Synchron
/0/1 processor
/0/1/0.1 processor Logische CPU
/0/1/0.2 processor Logische CPU
/0/100 bridge Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub
/0/100/1 bridge Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port
/0/100/1/0 display RV530/M56 GL [Mobility FireGL V5200]
/0/100/1b multimedia NM10/ICH7 Family High Definition Audio Controller
/0/100/1c bridge NM10/ICH7 Family PCI Express Port 1
/0/100/1c/0 ens2 network 82573L Gigabit Ethernet Controller
/0/100/1c.1 bridge NM10/ICH7 Family PCI Express Port 2
/0/100/1c.1/0 wls3 network PRO/Wireless 3945ABG [Golan] Network Connection
/0/100/1c.2 bridge NM10/ICH7 Family PCI Express Port 3
/0/100/1c.3 bridge NM10/ICH7 Family PCI Express Port 4
/0/100/1d bus NM10/ICH7 Family USB UHCI Controller #1
/0/100/1d/1 usb2 bus UHCI Host Controller
/0/100/1d.1 bus NM10/ICH7 Family USB UHCI Controller #2
/0/100/1d.1/1 usb3 bus UHCI Host Controller
/0/100/1d.2 bus NM10/ICH7 Family USB UHCI Controller #3
/0/100/1d.2/1 usb4 bus UHCI Host Controller
/0/100/1d.2/1/1 input USB Receiver
/0/100/1d.3 bus NM10/ICH7 Family USB UHCI Controller #4
/0/100/1d.3/1 usb5 bus UHCI Host Controller
/0/100/1d.3/1/2 generic Biometric Coprocessor
/0/100/1d.7 bus NM10/ICH7 Family USB2 EHCI Controller
/0/100/1d.7/1 usb1 bus EHCI Host Controller
/0/100/1d.7/1/2 multimedia DA-300USB
/0/100/1e bridge 82801 Mobile PCI Bridge
/0/100/1e/0 bridge PCI1510 PC card Cardbus Controller
/0/100/1f bridge 82801GBM (ICH7-M) LPC Interface Bridge
/0/100/1f.1 storage 82801G (ICH7 Family) IDE Controller
/0/100/1f.2 storage 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode]
/0/100/1f.3 bus NM10/ICH7 Family SMBus Controller
/0/2 scsi0 storage
/0/2/0.0.0 /dev/cdrom disk DVDRAM GSA-4083N
/0/3 scsi2 storage
/0/3/0.0.0 /dev/sda disk 2TB Samsung SSD 850
/0/3/0.0.0/1 /dev/sda1 volume 46GiB Linux filesystem partition
/0/3/0.0.0/2 /dev/sda2 volume 1732GiB Extended partition
/0/3/0.0.0/2/5 /dev/sda5 volume 1722GiB EXT4-Laufwerk
/0/3/0.0.0/2/6 /dev/sda6 volume 9535MiB Linux swap Laufwerk
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57 | marcus@T60p:~$ pulseaudio --dump-conf
### Aus Konfigurationsdatei wird gelesen: /etc/pulse/daemon.conf ###
daemonize = no
fail = yes
high-priority = yes
nice-level = -20
realtime-scheduling = yes
realtime-priority = 60
allow-module-loading = yes
allow-exit = yes
use-pid-file = yes
system-instance = no
local-server-type = user
cpu-limit = no
enable-shm = yes
flat-volumes = no
lock-memory = no
exit-idle-time = 20
scache-idle-time = 20
dl-search-path = /usr/lib/pulse-10.0/modules
default-script-file = /etc/pulse/default.pa
load-default-script-file = yes
log-target =
log-level = notice
resample-method = auto
enable-remixing = yes
enable-lfe-remixing = no
lfe-crossover-freq = 0
default-sample-format = s16le
default-sample-rate = 44100
alternate-sample-rate = 48000
default-sample-channels = 2
default-channel-map = front-left,front-right
default-fragments = 4
default-fragment-size-msec = 25
enable-deferred-volume = yes
deferred-volume-safety-margin-usec = 8000
deferred-volume-extra-delay-usec = 0
shm-size-bytes = 0
log-meta = no
log-time = no
log-backtrace = 0
rlimit-fsize = -1
rlimit-data = -1
rlimit-stack = -1
rlimit-core = -1
rlimit-rss = -1
rlimit-as = -1
rlimit-nproc = -1
rlimit-nofile = 256
rlimit-memlock = -1
rlimit-locks = -1
rlimit-sigpending = -1
rlimit-msgqueue = -1
rlimit-nice = 31
rlimit-rtprio = 60
rlimit-rttime = 200000
|
Ich habe mal die daemon.conf nach dem Vorschlägen aus der Pulseaudio Seite hier im Wiki angepasst. Bring aber auch nichts.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Ok,würde 2 Sachen ändern sudo -H pluma /etc/pulse/daemon.conf dort daemonize = no
in
daemonize = yes danach pulseaudio -k Dann mal den Lautsprecher aus dem Bluetooth-Manager löschen,danach ein Terminal öffnen journalctl -f eingeben,den Lautsprecher neu zufügen im Bluetooth-Manager,Musik darüber abspielen und die gesammte Terminal Ausgabe hier zeigen.
|
god_of_emptiness
(Themenstarter)
Anmeldungsdatum: 31. Mai 2007
Beiträge: 186
|
Musik über den Bluetooth-Lautsprecher ist kein Problem.
Der Bluetooth-Lautsprecher hat nichts mit dem Denon-DAC zu tun.
Wenn ich den Denon-DAC über USB-Kabel anschließe und daran die HiFi-Anlage oder Kopfhörer anschließe, dann hakt die Musik beim scrollen.
daemonize = yes ist jetzt gesetzt. Bringt aber auch nichts.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Alles klar,teste echo "-1" | sudo tee -a /sys/module/usbcore/parameters/autosuspend davon abgesehen kannst du trotzdem die Ausgabe von journalctl -f bei Verwendung deines Denon-DAC zeigen 😉 Sowie lspci -nnk | grep -i "VGA\|'Kern'\|3D\|Display" -A2 da es ja beim Scrollen im Browser?? auftritt.Kontrolliere auch mit top während der Verwendung des Denon-DAC,was beim Scrollen in top angezeigt wird.
|
god_of_emptiness
(Themenstarter)
Anmeldungsdatum: 31. Mai 2007
Beiträge: 186
|
1
2
3
4
5
6
7
8
9
10
11
12 | marcus@T60p:~$ journalctl -f
-- Logs begin at Sat 2017-08-26 12:01:15 CEST. --
Aug 26 17:12:27 T60p systemd[1]: Reloaded OpenBSD Secure Shell server.
Aug 26 17:12:27 T60p systemd[1]: Reloading.
Aug 26 17:12:28 T60p nm-dispatcher[8768]: req:5 'dhcp6-change' [ens2]: start running ordered scripts...
Aug 26 17:12:30 T60p ntpd[1487]: Soliciting pool server 213.172.105.106
Aug 26 17:12:31 T60p ntpd[1487]: Soliciting pool server 178.63.9.110
Aug 26 17:13:01 T60p sudo[9269]: pam_ecryptfs: pam_sm_authenticate: /home/marcus is already mounted
Aug 26 17:13:01 T60p sudo[9269]: marcus : TTY=pts/0 ; PWD=/home/marcus ; USER=root ; COMMAND=/usr/bin/tee -a /sys/module/usbcore/parameters/autosuspend
Aug 26 17:13:01 T60p sudo[9269]: pam_unix(sudo:session): session opened for user root by (uid=0)
Aug 26 17:13:01 T60p sudo[9269]: pam_unix(sudo:session): session closed for user root
Aug 26 17:13:19 T60p ntpd[1487]: 176.9.40.142 local addr 192.168.2.102 -> <null
|
| marcus@T60p:~$ lspci -nnk | grep -i "VGA\|'Kern'\|3D\|Display" -A2
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV530/M56 GL [Mobility FireGL V5200] [1002:71c4]
Subsystem: Lenovo ThinkPad T60p [17aa:2007]
Kernel driver in use: radeon
|
Bei Top kann ich nichts außergewöhnliches feststellen.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Änerungen? Browser? Bitte immer die Fragen vollständig beantworten da ich nicht vor deinem PC sitze 😉 Abfrage dpkg -l | grep alsa und dpkg -l | grep pulse
|
god_of_emptiness
(Themenstarter)
Anmeldungsdatum: 31. Mai 2007
Beiträge: 186
|
Danke erstmal für dein Bemühen.
Browser: Firefox 55.02.
Der Sound knackt aber auch, wenn in Rhythmbox oder Nautilus gescrollt wird, Arbeitsfächen gewechselt werden, größe der Fenster geändert werden, ...
Änderungen und wann es genau aufgetreten ist, kann ich leider nicht mehr nachfolziehen. | marcus@T60p:~$ dpkg -l | grep alsa
ii alsa-base 1.0.25+dfsg-0ubuntu5 all ALSA driver configuration files
ii alsa-utils 1.1.3-1ubuntu1 i386 Utilities for configuring and using ALSA
ii gstreamer1.0-alsa:i386 1.10.4-1ubuntu1 i386 GStreamer plugin for ALSA
ii libsox-fmt-alsa:i386 14.4.1-5build1 i386 SoX alsa format I/O library
|
1
2
3
4
5
6
7
8
9
10
11
12 | marcus@T60p:~$ dpkg -l | grep pulse
ii gstreamer1.0-pulseaudio:i386 1.10.4-1ubuntu1 i386 GStreamer plugin for PulseAudio
ii libcanberra-pulse:i386 0.30-3ubuntu1 i386 PulseAudio backend for libcanberra
ii libpulse-mainloop-glib0:i386 1:10.0-1ubuntu2 i386 PulseAudio client libraries (glib support)
ii libpulse0:i386 1:10.0-1ubuntu2 i386 PulseAudio client libraries
ii libpulsedsp:i386 1:10.0-1ubuntu2 i386 PulseAudio OSS pre-load library
ii osspd-pulseaudio 1.3.2-7 i386 OSS Proxy Daemon: PulseAudio backend
ii pulseaudio 1:10.0-1ubuntu2 i386 PulseAudio sound server
ii pulseaudio-module-bluetooth 1:10.0-1ubuntu2 i386 Bluetooth module for PulseAudio sound server
ii pulseaudio-module-gconf 1:10.0-1ubuntu2 i386 GConf module for PulseAudio sound server
ii pulseaudio-module-zeroconf 1:10.0-1ubuntu2 i386 Zeroconf module for PulseAudio sound server
ii pulseaudio-utils 1:10.0-1ubuntu2 i386 Command line tools for the PulseAudio sound server
|
Falls ich noch was übersehen habe, sag einfach Bescheid, ich sehe gerne nochmal nach.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Wann hast du die osspd-pulseaudio Komponenten Installiert und warum?Wir sollten es mal zum Testen ohne Pulse versuchen,da ich fast glaube das es nicht mit den Soundserver zusammen hängt. sudo -H pluma /etc/pulse/client.conf dort ändern ; autospawn = yes
in
autospawn = no sowie den Eintrag sudo -H pluma /etc/pulse/daemon.conf von daemonize = yes
in
daemonize = no danach Pulse beenden mit pulseaudio -k kontrolle mit pactl list sinks dort sollte dann ein Verbindungsfehler angezeigt werden.Wenn das der Fall ist entferne einmal den Denon von USB und stecke ihn wieder an und Teste.Rufe zum Einstellen den alsamixer auf alsamixer
|
god_of_emptiness
(Themenstarter)
Anmeldungsdatum: 31. Mai 2007
Beiträge: 186
|
Alles ausgeführt.
Ich bekommen einen Verbindungsfehler wie vorausgesagt.
Habe dann den Denon ab und wieder angeschlossen und im Alsamixer den Denon ausgewählt.
Die Musik wird trotzdem vom internen Lautsprecher wiedergegeben. | ─────────────────────────────────────────────────────────────────────────── AlsaMixer v1.1.3 ──────────────────────────────────────────────────────────────────────────────┐
│ Gerät: DA-300USB F1: Hilfe │
│ Chip: USB Mixer F2: System-Informationen │
│ Ansicht: F3:[Wiedergabe] F4: Aufnahme F5: Alle F6: Klangkarte auswählen │
│ Element: Clock Source 41 Validity
|
Edit:
Den osspd kenne ich nicht und weis nicht wann und warum er installiert ist.
|
god_of_emptiness
(Themenstarter)
Anmeldungsdatum: 31. Mai 2007
Beiträge: 186
|
Ich habe einfach mal den osspd deinstalliert und das Problem scheint behoben.
Vielen Dank für deine Mühe.
|
god_of_emptiness
(Themenstarter)
Anmeldungsdatum: 31. Mai 2007
Beiträge: 186
|
Es tritt jetzt wieder auf.
Ich werde mal im laufe der nächsten 2 Wochen mal das aktuelle Gnome Ubuntu frisch installieren.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Ok,dann können wir ja noch was machen 😉 sudo -H pluma /etc/pulse/daemon.conf die Werte ändern nice-level = -20
auf
; nice-level = -11
sowie
default-fragments = 4
auf
default-fragments = 6
und default-sample-rate = 44100
auf
default-sample-rate = 96000 Wenn noch keine Änderung dann mal folgendes zeigen cat /etc/pulse/default.pa
|
god_of_emptiness
(Themenstarter)
Anmeldungsdatum: 31. Mai 2007
Beiträge: 186
|
Leider immer noch kein Verbesserung.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115 | pulseaudio --dump-conf
### Aus Konfigurationsdatei wird gelesen: /etc/pulse/daemon.conf ###
daemonize = yes
fail = yes
high-priority = yes
nice-level = -11
realtime-scheduling = yes
realtime-priority = 60
allow-module-loading = yes
allow-exit = yes
use-pid-file = yes
system-instance = no
local-server-type = user
cpu-limit = no
enable-shm = yes
flat-volumes = no
lock-memory = no
exit-idle-time = 20
scache-idle-time = 20
dl-search-path = /usr/lib/pulse-10.0/modules
default-script-file = /etc/pulse/default.pa
load-default-script-file = yes
log-target =
log-level = notice
resample-method = auto
enable-remixing = yes
enable-lfe-remixing = no
lfe-crossover-freq = 0
default-sample-format = s16le
default-sample-rate = 96000
alternate-sample-rate = 48000
default-sample-channels = 2
default-channel-map = front-left,front-right
default-fragments = 4
default-fragment-size-msec = 25
enable-deferred-volume = yes
deferred-volume-safety-margin-usec = 8000
deferred-volume-extra-delay-usec = 0
shm-size-bytes = 0
log-meta = no
log-time = no
log-backtrace = 0
rlimit-fsize = -1
rlimit-data = -1
rlimit-stack = -1
rlimit-core = -1
rlimit-rss = -1
rlimit-as = -1
rlimit-nproc = -1
rlimit-nofile = 256
rlimit-memlock = -1
rlimit-locks = -1
rlimit-sigpending = -1
rlimit-msgqueue = -1
rlimit-nice = 31
rlimit-rtprio = 60
rlimit-rttime = 200000
marcus@T60p:~$ sudo nano /etc/pulse/daemon.conf
marcus@T60p:~$ pulseaudio --dump-conf
### Aus Konfigurationsdatei wird gelesen: /etc/pulse/daemon.conf ###
daemonize = yes
fail = yes
high-priority = yes
nice-level = -11
realtime-scheduling = yes
realtime-priority = 60
allow-module-loading = yes
allow-exit = yes
use-pid-file = yes
system-instance = no
local-server-type = user
cpu-limit = no
enable-shm = yes
flat-volumes = no
lock-memory = no
exit-idle-time = 20
scache-idle-time = 20
dl-search-path = /usr/lib/pulse-10.0/modules
default-script-file = /etc/pulse/default.pa
load-default-script-file = yes
log-target =
log-level = notice
resample-method = auto
enable-remixing = yes
enable-lfe-remixing = no
lfe-crossover-freq = 0
default-sample-format = s16le
default-sample-rate = 96000
alternate-sample-rate = 48000
default-sample-channels = 2
default-channel-map = front-left,front-right
default-fragments = 6
default-fragment-size-msec = 25
enable-deferred-volume = yes
deferred-volume-safety-margin-usec = 8000
deferred-volume-extra-delay-usec = 0
shm-size-bytes = 0
log-meta = no
log-time = no
log-backtrace = 0
rlimit-fsize = -1
rlimit-data = -1
rlimit-stack = -1
rlimit-core = -1
rlimit-rss = -1
rlimit-as = -1
rlimit-nproc = -1
rlimit-nofile = 256
rlimit-memlock = -1
rlimit-locks = -1
rlimit-sigpending = -1
rlimit-msgqueue = -1
rlimit-nice = 31
rlimit-rtprio = 60
rlimit-rttime = 200000
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141 | marcus@T60p:~$ cat /etc/pulse/default.pa
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
.fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif
### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
#load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
### Make some devices default
#set-default-sink output
#set-default-source input
|
In htop sehe ich 3 Pulseaudioprozesse. Ist das so i.O.
Was ist denn der GDM Pulseaudioprozess ?
- Bilder
|