Hallo,
wie gewünscht - ein neues Thema.
Ich habe mir den USB-Stick etwas vorschnell gekauft - leider.
Zwei Codeblocks, die hoffentlich weiterhelfen - lsusb und dmesg.
mhw@mhw-notebook:~$ lsusb Bus 002 Device 002: ID 04f2:b249 Chicony Electronics Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 003: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 007: ID 1130:6606 Tenx Technology, Inc. Bus 001 Device 006: ID 04d9:1603 Holtek Semiconductor, Inc. Keyboard Bus 001 Device 005: ID 0939:0b16 Lumberg, Inc. Bus 001 Device 004: ID 07ca:1871 AVerMedia Technologies, Inc. Bus 001 Device 003: ID 1a40:0101 Terminus Technology Inc. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 04f3:02f4 Elan Microelectronics Corp. 2.4G Cordless Mouse Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
mhw@mhw-notebook:~$ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.19.0-80-generic (buildd@lcy01-33) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #88~14.04.1-Ubuntu SMP Fri Jan 13 14:54:07 UTC 2017 (Ubuntu 3.19.0-80.88~14.04.1-generic 3.19.8-ckt22) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-80-generic root=UUID=985264c7-04a1-4b8d-9ff1-26c763f249bb ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] tseg: 00dff00000 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfb3efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfb3f000-0x00000000dfbbefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dfbbf000-0x00000000dfebefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dfebf000-0x00000000dfef4fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dfef5000-0x00000000dfefffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dff00000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000106ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000107000000-0x000000011effffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP 635 Notebook PC /3577, BIOS F.34 07/27/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x107000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back [ 0.000000] 3 base 0DFEBD000 mask FFFFFF000 uncachable [ 0.000000] 4 base 0FFE00000 mask FFFE00000 write-protect [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000011f000000 aka 4592M [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] e820: last_pfn = 0xdff00 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE [ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE [ 0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x106e00000-0x106ffffff] [ 0.000000] [mem 0x106e00000-0x106ffffff] page 2M [ 0.000000] BRK [0x01fd8000, 0x01fd8fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100000000-0x106dfffff] [ 0.000000] [mem 0x100000000-0x106dfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0xc0000000-0xdfb3efff] [ 0.000000] [mem 0xc0000000-0xdf9fffff] page 2M [ 0.000000] [mem 0xdfa00000-0xdfb3efff] page 4k [ 0.000000] BRK [0x01fd9000, 0x01fd9fff] PGTABLE [ 0.000000] BRK [0x01fda000, 0x01fdafff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xdfef5000-0xdfefffff] [ 0.000000] [mem 0xdfef5000-0xdfefffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbfffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G [ 0.000000] RAMDISK: [mem 0x3457a000-0x362b4fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000DFEF4120 000074 (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 0x00000000DFEF3000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 ACPI 00040000) [ 0.000000] ACPI: DSDT 0x00000000DFEE0000 00E509 (v01 HP INSYDE F0000000 ACPI 00040000) [ 0.000000] ACPI: FACS 0x00000000DFC96000 000040 [ 0.000000] ACPI: FACS 0x00000000DFC96000 000040 [ 0.000000] ACPI: HPET 0x00000000DFEF2000 000038 (v01 HP INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: APIC 0x00000000DFEF1000 000084 (v02 HP INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: MCFG 0x00000000DFEF0000 00003C (v01 HP INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: ASF! 0x00000000DFEEF000 0000A5 (v32 HP INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: BOOT 0x00000000DFEDF000 000028 (v01 HP INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: SLIC 0x00000000DFEDE000 000176 (v01 HPQOEM SLIC-MPC 00000001 ACPI 00040000) [ 0.000000] ACPI: MSDM 0x00000000DFEDD000 000055 (v03 HP INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x00000000DFEDC000 0003DE (v01 HP INSYDE 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 0x00000000DFEDA000 00168E (v02 HP INSYDE 00000001 MSFT 04000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000106ffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x106ffa000-0x106ffefff] [ 0.000000] [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880102c00000-ffff8801065fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x106ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xdfb3efff] [ 0.000000] node 0: [mem 0xdfef5000-0xdfefffff] [ 0.000000] node 0: [mem 0x100000000-0x106ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x106ffffff] [ 0.000000] On node 0 totalpages: 944872 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14254 pages used for memmap [ 0.000000] DMA32 zone: 912202 pages, LIFO batch:31 [ 0.000000] Normal zone: 448 pages used for memmap [ 0.000000] Normal zone: 28672 pages, LIFO batch:7 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfb3f000-0xdfbbefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfbbf000-0xdfebefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfebf000-0xdfef4fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdff00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff880106c00000 s86144 r8192 d32640 u524288 [ 0.000000] pcpu-alloc: s86144 r8192 d32640 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 930085 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-80-generic root=UUID=985264c7-04a1-4b8d-9ff1-26c763f249bb ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3607020K/3779488K available (7948K kernel code, 1175K rwdata, 3760K rodata, 1412K init, 1292K bss, 172468K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16640 nr_irqs:456 16 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-3. [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1646.640 MHz processor [ 0.000056] Calibrating delay loop (skipped), value calculated using timer frequency.. 3293.28 BogoMIPS (lpj=6586560) [ 0.000064] pid_max: default: 32768 minimum: 301 [ 0.000080] ACPI: Core revision 20141107 [ 0.018801] ACPI: All ACPI Tables successfully acquired [ 0.018862] Security Framework initialized [ 0.018897] AppArmor: AppArmor initialized [ 0.018901] Yama: becoming mindful. [ 0.019611] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.022223] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.023417] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.023444] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.023915] Initializing cgroup subsys memory [ 0.023935] Initializing cgroup subsys devices [ 0.023941] Initializing cgroup subsys freezer [ 0.023947] Initializing cgroup subsys net_cls [ 0.023952] Initializing cgroup subsys blkio [ 0.023958] Initializing cgroup subsys perf_event [ 0.023963] Initializing cgroup subsys net_prio [ 0.023968] Initializing cgroup subsys hugetlb [ 0.024015] CPU: Physical Processor ID: 0 [ 0.024018] CPU: Processor Core ID: 0 [ 0.024022] mce: CPU supports 6 MCE banks [ 0.024039] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.024039] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 [ 0.024254] Freeing SMP alternatives memory: 32K (ffffffff81e88000 - ffffffff81e90000) [ 0.032005] ftrace: allocating 30063 entries in 118 pages [ 0.060730] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.100435] smpboot: CPU0: AMD E-450 APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00) [ 0.207258] Performance Events: AMD PMU driver. [ 0.207267] ... version: 0 [ 0.207270] ... bit width: 48 [ 0.207272] ... generic registers: 4 [ 0.207274] ... value mask: 0000ffffffffffff [ 0.207277] ... max period: 00007fffffffffff [ 0.207279] ... fixed-purpose events: 0 [ 0.207281] ... event mask: 000000000000000f [ 0.208903] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.209168] x86: Booting SMP configuration: [ 0.209173] .... node #0, CPUs: #1 [ 0.222357] x86: Booted up 1 node, 2 CPUs [ 0.222362] smpboot: Total of 2 processors activated (6586.56 BogoMIPS) [ 0.223357] devtmpfs: initialized [ 0.229744] evm: security.selinux [ 0.229747] evm: security.SMACK64 [ 0.229750] evm: security.SMACK64EXEC [ 0.229752] evm: security.SMACK64TRANSMUTE [ 0.229754] evm: security.SMACK64MMAP [ 0.229756] evm: security.ima [ 0.229758] evm: security.capability [ 0.230038] PM: Registering ACPI NVS region [mem 0xdfbbf000-0xdfebefff] (3145728 bytes) [ 0.230612] pinctrl core: initialized pinctrl subsystem [ 0.230942] RTC time: 19:45:20, date: 12/07/17 [ 0.231221] NET: Registered protocol family 16 [ 0.238808] cpuidle: using governor ladder [ 0.239531] cpuidle: using governor menu [ 0.239832] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.239837] ACPI: bus type PCI registered [ 0.239841] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.240089] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.240095] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.240314] PCI: Using configuration type 1 for base access [ 0.240652] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.240654] mtrr: probably your BIOS does not setup all CPUs. [ 0.240656] mtrr: corrected configuration. [ 0.244527] ACPI: Added _OSI(Module Device) [ 0.244534] ACPI: Added _OSI(Processor Device) [ 0.244537] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.244540] ACPI: Added _OSI(Processor Aggregator Device) [ 0.249829] ACPI: Executed 1 blocks of module-level executable AML code [ 0.255303] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.269650] ACPI: Interpreter enabled [ 0.269674] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580) [ 0.269685] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580) [ 0.269719] ACPI: (supports S0 S3 S4 S5) [ 0.269723] ACPI: Using IOAPIC for interrupt routing [ 0.270101] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.337124] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.337141] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.337764] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.337769] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.338046] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce5ff]) [ 0.338056] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.338512] PCI host bridge to bus 0000:00 [ 0.338519] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.338524] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.338528] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.338533] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.338537] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff] [ 0.338541] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff] [ 0.338545] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff] [ 0.338549] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.338553] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.338556] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.338560] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.338564] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.338568] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.338572] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff] [ 0.338575] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff] [ 0.338579] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff] [ 0.338583] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff] [ 0.338587] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff] [ 0.338603] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000 [ 0.338791] pci 0000:00:01.0: [1002:9806] type 00 class 0x030000 [ 0.338810] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref] [ 0.338820] pci 0000:00:01.0: reg 0x14: [io 0x4000-0x40ff] [ 0.338831] pci 0000:00:01.0: reg 0x18: [mem 0xf0400000-0xf043ffff] [ 0.338901] pci 0000:00:01.0: supports D1 D2 [ 0.339050] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300 [ 0.339066] pci 0000:00:01.1: reg 0x10: [mem 0xf0444000-0xf0447fff] [ 0.339146] pci 0000:00:01.1: supports D1 D2 [ 0.339384] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.339412] pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f] [ 0.339427] pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127] [ 0.339441] pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117] [ 0.339455] pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123] [ 0.339470] pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f] [ 0.339484] pci 0000:00:11.0: reg 0x24: [mem 0xf044d000-0xf044d3ff] [ 0.339688] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.339709] pci 0000:00:12.0: reg 0x10: [mem 0xf044c000-0xf044cfff] [ 0.339863] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.340023] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.340730] pci 0000:00:12.2: reg 0x10: [mem 0xf044b000-0xf044b0ff] [ 0.344475] pci 0000:00:12.2: supports D1 D2 [ 0.344486] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.344609] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.344744] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.345014] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.345049] pci 0000:00:14.2: reg 0x10: [mem 0xf0440000-0xf0443fff 64bit] [ 0.345144] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.345335] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.345596] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.345716] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.345865] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.345886] pci 0000:00:14.5: reg 0x10: [mem 0xf044a000-0xf044afff] [ 0.346038] pci 0000:00:14.5: System wakeup disabled by ACPI [ 0.346165] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 0.346284] pci 0000:00:15.0: supports D1 D2 [ 0.346368] pci 0000:00:15.0: System wakeup disabled by ACPI [ 0.346489] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400 [ 0.346605] pci 0000:00:15.1: supports D1 D2 [ 0.346688] pci 0000:00:15.1: System wakeup disabled by ACPI [ 0.346844] pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400 [ 0.346960] pci 0000:00:15.3: supports D1 D2 [ 0.347146] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.347168] pci 0000:00:16.0: reg 0x10: [mem 0xf0449000-0xf0449fff] [ 0.347318] pci 0000:00:16.0: System wakeup disabled by ACPI [ 0.347418] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.348105] pci 0000:00:16.2: reg 0x10: [mem 0xf0448000-0xf04480ff] [ 0.351744] pci 0000:00:16.2: supports D1 D2 [ 0.351755] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.351877] pci 0000:00:16.2: System wakeup disabled by ACPI [ 0.352072] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000 [ 0.352244] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000 [ 0.352406] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000 [ 0.352568] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000 [ 0.352741] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000 [ 0.352900] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000 [ 0.353058] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000 [ 0.353216] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000 [ 0.353544] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode) [ 0.353560] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.353564] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.353568] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.353573] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode) [ 0.353577] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode) [ 0.353581] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode) [ 0.353585] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 0.353588] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.353592] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.353596] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.353600] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.353604] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 0.353608] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode) [ 0.353612] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode) [ 0.353616] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode) [ 0.353620] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode) [ 0.353623] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode) [ 0.353852] pci 0000:02:00.0: [10ec:5209] type 00 class 0xff0000 [ 0.353884] pci 0000:02:00.0: reg 0x10: [mem 0xf0300000-0xf0300fff] [ 0.354066] pci 0000:02:00.0: supports D1 D2 [ 0.354070] pci 0000:02:00.0: PME# supported from D1 D2 D3hot [ 0.362683] pci 0000:00:15.0: PCI bridge to [bus 02-05] [ 0.362709] pci 0000:00:15.0: bridge window [io 0x3000-0x3fff] [ 0.362718] pci 0000:00:15.0: bridge window [mem 0xf0300000-0xf03fffff] [ 0.362728] pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.362991] pci 0000:06:00.0: [10ec:8136] type 00 class 0x020000 [ 0.363024] pci 0000:06:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.363065] pci 0000:06:00.0: reg 0x18: [mem 0xf0104000-0xf0104fff 64bit pref] [ 0.363092] pci 0000:06:00.0: reg 0x20: [mem 0xf0100000-0xf0103fff 64bit pref] [ 0.363236] pci 0000:06:00.0: supports D1 D2 [ 0.363241] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.374679] pci 0000:00:15.1: PCI bridge to [bus 06] [ 0.374706] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff] [ 0.374722] pci 0000:00:15.1: bridge window [mem 0xf0100000-0xf01fffff 64bit pref] [ 0.374986] pci 0000:07:00.0: [168c:002b] type 00 class 0x028000 [ 0.375028] pci 0000:07:00.0: reg 0x10: [mem 0xf0200000-0xf020ffff 64bit] [ 0.375214] pci 0000:07:00.0: supports D1 [ 0.375218] pci 0000:07:00.0: PME# supported from D0 D1 D3hot [ 0.386668] pci 0000:00:15.3: PCI bridge to [bus 07] [ 0.386700] pci 0000:00:15.3: bridge window [mem 0xf0200000-0xf02fffff] [ 0.416373] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.416498] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.416668] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.416797] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.416903] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.417009] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.417116] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.417225] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.417620] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.417754] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 [ 0.418150] vgaarb: setting as boot device: PCI:0000:00:01.0 [ 0.418159] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none [ 0.418172] vgaarb: loaded [ 0.418175] vgaarb: bridge control possible 0000:00:01.0 [ 0.418732] SCSI subsystem initialized [ 0.418911] libata version 3.00 loaded. [ 0.418974] ACPI: bus type USB registered [ 0.419028] usbcore: registered new interface driver usbfs [ 0.419050] usbcore: registered new interface driver hub [ 0.419072] usbcore: registered new device driver usb [ 0.419606] PCI: Using ACPI for IRQ routing [ 0.422226] PCI: pci_cache_line_size set to 64 bytes [ 0.422337] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.422341] e820: reserve RAM buffer [mem 0xdfb3f000-0xdfffffff] [ 0.422345] e820: reserve RAM buffer [mem 0xdff00000-0xdfffffff] [ 0.422348] e820: reserve RAM buffer [mem 0x107000000-0x107ffffff] [ 0.422641] NetLabel: Initializing [ 0.422644] NetLabel: domain hash size = 128 [ 0.422647] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.422672] NetLabel: unlabeled traffic allowed by default [ 0.423066] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.423078] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.425280] Switched to clocksource hpet [ 0.437843] AppArmor: AppArmor Filesystem Enabled [ 0.438017] pnp: PnP ACPI init [ 0.438313] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.438320] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.438329] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.438667] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.438785] system 00:02: [io 0x0400-0x04cf] could not be reserved [ 0.438790] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.438795] system 00:02: [io 0x04d6] has been reserved [ 0.438799] system 00:02: [io 0x0680-0x06ff] has been reserved [ 0.438803] system 00:02: [io 0x077a] has been reserved [ 0.438808] system 00:02: [io 0x0c00-0x0c01] has been reserved [ 0.438812] system 00:02: [io 0x0c14] has been reserved [ 0.438816] system 00:02: [io 0x0c50-0x0c52] has been reserved [ 0.438820] system 00:02: [io 0x0c6c] has been reserved [ 0.438824] system 00:02: [io 0x0c6f] has been reserved [ 0.438828] system 00:02: [io 0x0cd0-0x0cdb] has been reserved [ 0.438834] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.438992] system 00:03: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.438998] system 00:03: [mem 0xffffffb0-0xfffffffe] has been reserved [ 0.439002] system 00:03: [mem 0xffffff00-0xfffffffe] could not be reserved [ 0.439007] system 00:03: [mem 0xffe00000-0xffffffff] could not be reserved [ 0.439013] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.462603] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.462683] pnp 00:05: Plug and Play ACPI device, IDs SYN1e4b SYN1e00 SYN0002 PNP0f13 (active) [ 0.463442] pnp: PnP ACPI: found 6 devices [ 0.475082] pci 0000:00:14.4: PCI bridge to [bus 01] [ 0.475108] pci 0000:00:15.0: PCI bridge to [bus 02-05] [ 0.475114] pci 0000:00:15.0: bridge window [io 0x3000-0x3fff] [ 0.475124] pci 0000:00:15.0: bridge window [mem 0xf0300000-0xf03fffff] [ 0.475131] pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.475140] pci 0000:00:15.1: PCI bridge to [bus 06] [ 0.475145] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff] [ 0.475156] pci 0000:00:15.1: bridge window [mem 0xf0100000-0xf01fffff 64bit pref] [ 0.475165] pci 0000:00:15.3: PCI bridge to [bus 07] [ 0.475174] pci 0000:00:15.3: bridge window [mem 0xf0200000-0xf02fffff] [ 0.475188] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.475192] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.475197] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.475201] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.475205] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.475209] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.475212] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff] [ 0.475216] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff] [ 0.475220] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff] [ 0.475224] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff] [ 0.475228] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff] [ 0.475231] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff] [ 0.475235] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff] [ 0.475239] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff] [ 0.475243] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff] [ 0.475247] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff] [ 0.475251] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff] [ 0.475255] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.475259] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.475263] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.475267] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.475270] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.475274] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.475278] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff] [ 0.475281] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff] [ 0.475285] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff] [ 0.475289] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff] [ 0.475293] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff] [ 0.475296] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff] [ 0.475300] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff] [ 0.475304] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff] [ 0.475307] pci_bus 0000:01: resource 18 [mem 0xe0000000-0xf7ffffff] [ 0.475311] pci_bus 0000:01: resource 19 [mem 0xfc000000-0xfed3ffff] [ 0.475315] pci_bus 0000:01: resource 20 [mem 0xfed45000-0xffffffff] [ 0.475319] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.475323] pci_bus 0000:02: resource 1 [mem 0xf0300000-0xf03fffff] [ 0.475327] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.475331] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff] [ 0.475335] pci_bus 0000:06: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref] [ 0.475339] pci_bus 0000:07: resource 1 [mem 0xf0200000-0xf02fffff] [ 0.475401] NET: Registered protocol family 2 [ 0.475759] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.475956] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.476212] TCP: Hash tables configured (established 32768 bind 32768) [ 0.476324] TCP: reno registered [ 0.476352] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.476402] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.476587] NET: Registered protocol family 1 [ 0.476630] pci 0000:00:01.0: Video device with shadowed ROM [ 1.177925] PCI: CLS 64 bytes, default 64 [ 1.178073] Trying to unpack rootfs image as initramfs... [ 2.156218] Freeing initrd memory: 29932K (ffff88003457a000 - ffff8800362b5000) [ 2.156273] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.156280] software IO TLB [mem 0xdbb3f000-0xdfb3f000] (64MB) mapped at [ffff8800dbb3f000-ffff8800dfb3efff] [ 2.156419] Simple Boot Flag at 0x44 set to 0x1 [ 2.156863] microcode: CPU0: patch_level=0x05000101 [ 2.156879] microcode: CPU1: patch_level=0x05000101 [ 2.157191] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 2.157210] LVT offset 0 assigned for vector 0x400 [ 2.157311] perf: AMD IBS detected (0x000000ff) [ 2.157394] Scanning for low memory corruption every 60 seconds [ 2.158490] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 2.158529] Initialise system trusted keyring [ 2.158575] audit: initializing netlink subsys (disabled) [ 2.158614] audit: type=2000 audit(1512675922.040:1): initialized [ 2.159756] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.163481] zpool: loaded [ 2.163487] zbud: loaded [ 2.164096] VFS: Disk quotas dquot_6.5.2 [ 2.164211] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.165673] fuse init (API version 7.23) [ 2.166129] Key type big_key registered [ 2.167244] Key type asymmetric registered [ 2.167255] Asymmetric key parser 'x509' registered [ 2.167381] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.167517] io scheduler noop registered [ 2.167524] io scheduler deadline registered (default) [ 2.167598] io scheduler cfq registered [ 2.168896] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt [ 2.168902] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 2.168910] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded [ 2.168945] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt [ 2.168949] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt [ 2.168957] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded [ 2.168994] pcieport 0000:00:15.3: Signaling PME through PCIe PME interrupt [ 2.168998] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt [ 2.169005] pcie_pme 0000:00:15.3:pcie01: service driver pcie_pme loaded [ 2.169021] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.169065] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.169137] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 2.169139] vesafb: scrolling: redraw [ 2.169143] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 2.169466] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004780000, using 4160k, total 4160k [ 2.169808] Console: switching to colour frame buffer device 170x48 [ 2.169854] fb0: VESA VGA frame buffer device [ 2.171585] ACPI: AC Adapter [AC] (on-line) [ 2.171858] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 2.173362] ACPI: Lid Switch [LID] [ 2.173644] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 2.173650] ACPI: Power Button [PWRB] [ 2.173734] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.173739] ACPI: Power Button [PWRF] [ 2.173964] ACPI: acpi_idle registered with cpuidle [ 2.179143] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.179148] ACPI: Thermal Zone [TSZ0] (37 C) [ 2.179225] GHES: HEST is not enabled! [ 2.179508] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.185444] Linux agpgart interface v0.103 [ 2.190088] brd: module loaded [ 2.192293] loop: module loaded [ 2.192767] libphy: Fixed MDIO Bus: probed [ 2.192774] tun: Universal TUN/TAP device driver, 1.6 [ 2.192777] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 2.192945] PPP generic driver version 2.4.2 [ 2.193151] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.193165] ehci-pci: EHCI PCI platform driver [ 2.193574] QUIRK: Enable AMD PLL fix [ 2.193621] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.193639] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.193649] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.193703] ehci-pci 0000:00:12.2: debug port 1 [ 2.193772] ehci-pci 0000:00:12.2: irq 17, io mem 0xf044b000 [ 2.205647] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.205802] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.205808] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.205812] usb usb1: Product: EHCI Host Controller [ 2.205816] usb usb1: Manufacturer: Linux 3.19.0-80-generic ehci_hcd [ 2.205820] usb usb1: SerialNumber: 0000:00:12.2 [ 2.206263] hub 1-0:1.0: USB hub found [ 2.206281] hub 1-0:1.0: 5 ports detected [ 2.206944] ehci-pci 0000:00:16.2: EHCI Host Controller [ 2.206957] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 2 [ 2.206966] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.206982] ehci-pci 0000:00:16.2: debug port 1 [ 2.207039] ehci-pci 0000:00:16.2: irq 17, io mem 0xf0448000 [ 2.217617] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 2.217820] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.217825] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.217830] usb usb2: Product: EHCI Host Controller [ 2.217834] usb usb2: Manufacturer: Linux 3.19.0-80-generic ehci_hcd [ 2.217837] usb usb2: SerialNumber: 0000:00:16.2 [ 2.218237] hub 2-0:1.0: USB hub found [ 2.218255] hub 2-0:1.0: 4 ports detected [ 2.218899] ehci-platform: EHCI generic platform driver [ 2.218930] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.218942] ohci-pci: OHCI PCI platform driver [ 2.219292] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.219361] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 2.219420] ohci-pci 0000:00:12.0: irq 18, io mem 0xf044c000 [ 2.238821] ACPI: Battery Slot [BAT0] (battery present) [ 2.277925] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.277934] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.277938] usb usb3: Product: OHCI PCI host controller [ 2.277942] usb usb3: Manufacturer: Linux 3.19.0-80-generic ohci_hcd [ 2.277946] usb usb3: SerialNumber: 0000:00:12.0 [ 2.278513] hub 3-0:1.0: USB hub found [ 2.278606] hub 3-0:1.0: 5 ports detected [ 2.279204] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.279217] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 4 [ 2.279268] ohci-pci 0000:00:14.5: irq 18, io mem 0xf044a000 [ 2.337928] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.337937] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.337942] usb usb4: Product: OHCI PCI host controller [ 2.337946] usb usb4: Manufacturer: Linux 3.19.0-80-generic ohci_hcd [ 2.337949] usb usb4: SerialNumber: 0000:00:14.5 [ 2.338548] hub 4-0:1.0: USB hub found [ 2.338642] hub 4-0:1.0: 2 ports detected [ 2.339165] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 2.339178] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 5 [ 2.339233] ohci-pci 0000:00:16.0: irq 18, io mem 0xf0449000 [ 2.397938] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.397947] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.397952] usb usb5: Product: OHCI PCI host controller [ 2.397956] usb usb5: Manufacturer: Linux 3.19.0-80-generic ohci_hcd [ 2.397959] usb usb5: SerialNumber: 0000:00:16.0 [ 2.398549] hub 5-0:1.0: USB hub found [ 2.398642] hub 5-0:1.0: 4 ports detected [ 2.399048] ohci-platform: OHCI generic platform driver [ 2.399079] uhci_hcd: USB Universal Host Controller Interface driver [ 2.399251] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.408606] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.408616] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.409350] mousedev: PS/2 mouse device common for all mice [ 2.410257] rtc_cmos 00:01: RTC can wake from S4 [ 2.410485] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 2.410528] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs [ 2.410549] i2c /dev entries driver [ 2.410711] device-mapper: uevent: version 1.0.3 [ 2.410934] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com [ 2.410977] ledtrig-cpu: registered to indicate activity on CPUs [ 2.411311] PCCT header not found. [ 2.411519] TCP: cubic registered [ 2.411764] NET: Registered protocol family 10 [ 2.412278] NET: Registered protocol family 17 [ 2.412325] Key type dns_resolver registered [ 2.413057] Loading compiled-in X.509 certificates [ 2.415590] Loaded X.509 cert 'Magrathea: Glacier signing key: a0fe5d15c793911f01ec455d4a8b3d59ba2e0e88' [ 2.415627] registered taskstats version 1 [ 2.416092] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.422250] Key type trusted registered [ 2.431813] Key type encrypted registered [ 2.431837] AppArmor: AppArmor sha1 policy hashing enabled [ 2.431845] ima: No TPM chip found, activating TPM-bypass! [ 2.431902] evm: HMAC attrs: 0x1 [ 2.432648] Magic number: 13:813:798 [ 2.432852] rtc_cmos 00:01: setting system clock to 2017-12-07 19:45:22 UTC (1512675922) [ 2.433057] acpi-cpufreq: overriding BIOS provided _PSD data [ 2.433283] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.433286] EDD information not available. [ 2.433448] PM: Hibernation image not present or could not be loaded. [ 2.434571] Freeing unused kernel memory: 1412K (ffffffff81d27000 - ffffffff81e88000) [ 2.434579] Write protecting the kernel read-only data: 12288k [ 2.435223] Freeing unused kernel memory: 232K (ffff8800017c6000 - ffff880001800000) [ 2.435581] Freeing unused kernel memory: 336K (ffff880001bac000 - ffff880001c00000) [ 2.477186] systemd-udevd[108]: starting version 204 [ 2.515225] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 2.521434] acpi device:00: registered as cooling_device2 [ 2.521743] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 2.529614] usb 2-2: new high-speed USB device number 2 using ehci-pci [ 2.544645] wmi: Mapper loaded [ 2.557933] [drm] Initialized drm 1.1.0 20060810 [ 2.571691] ahci 0000:00:11.0: version 3.0 [ 2.571980] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 2.571987] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 2.573604] usb 1-3: new high-speed USB device number 3 using ehci-pci [ 2.580546] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 27 [ 2.598582] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.598608] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.604136] r8169 0000:06:00.0 eth0: RTL8105e at 0xffffc9000476e000, 2c:76:8a:e4:de:6f, XID 00a00000 IRQ 28 [ 2.614281] scsi host0: ahci [ 2.621146] [drm] radeon kernel modesetting enabled. [ 2.621267] scsi host1: ahci [ 2.621423] ata1: SATA max UDMA/133 abar m1024@0xf044d000 port 0xf044d100 irq 19 [ 2.621429] ata2: SATA max UDMA/133 abar m1024@0xf044d000 port 0xf044d180 irq 19 [ 2.645135] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> [ 2.645143] AMD IOMMUv2 functionality not available on this system [ 2.653159] CRAT table not found [ 2.653167] Finished initializing topology ret=0 [ 2.653344] kfd kfd: Initialized module [ 2.653862] checking generic (e0000000 410000) vs hw (e0000000 10000000) [ 2.653870] fb: switching to radeondrmfb from VESA VGA [ 2.653920] Console: switching to colour dummy device 80x25 [ 2.655631] [drm] initializing kernel modesetting (PALM 0x1002:0x9806 0x103C:0x3577). [ 2.655666] [drm] register mmio base: 0xF0400000 [ 2.655669] [drm] register mmio size: 262144 [ 2.656399] ATOM BIOS: HP [ 2.656478] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used) [ 2.656483] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF [ 2.656487] [drm] Detected VRAM RAM=384M, BAR=256M [ 2.656490] [drm] RAM width 32bits DDR [ 2.656779] [TTM] Zone kernel: Available graphics memory: 1819482 kiB [ 2.656783] [TTM] Initializing pool allocator [ 2.656794] [TTM] Initializing DMA pool allocator [ 2.656846] [drm] radeon: 384M of VRAM memory ready [ 2.656848] [drm] radeon: 1024M of GTT memory ready. [ 2.656873] [drm] Loading PALM Microcode [ 2.656985] [drm] Internal thermal controller without fan control [ 2.657079] [drm] Found smc ucode version: 0x00010601 [ 2.657218] [drm] radeon: dpm initialized [ 2.657510] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 2.669151] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). [ 2.670482] radeon 0000:00:01.0: WB enabled [ 2.670495] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff880035278c00 [ 2.670501] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffff880035278c0c [ 2.671285] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90004d32118 [ 2.671291] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.671293] [drm] Driver supports precise vblank timestamp query. [ 2.671297] radeon 0000:00:01.0: radeon: MSI limited to 32-bit [ 2.671357] radeon 0000:00:01.0: radeon: using MSI. [ 2.671398] [drm] radeon: irq initialized. [ 2.691173] usb 4-2: new full-speed USB device number 2 using ohci-pci [ 2.694840] [drm] ring test on 0 succeeded in 1 usecs [ 2.694856] [drm] ring test on 3 succeeded in 3 usecs [ 2.709578] usb 1-3: New USB device found, idVendor=1a40, idProduct=0101 [ 2.709587] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.709592] usb 1-3: Product: USB 2.0 Hub [ 2.716343] hub 1-3:1.0: USB hub found [ 2.716423] hub 1-3:1.0: 4 ports detected [ 2.739102] usb 2-2: New USB device found, idVendor=04f2, idProduct=b249 [ 2.739112] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 2.739117] usb 2-2: Product: HP Webcam-101 [ 2.739121] usb 2-2: Manufacturer: Chicony Electronics Co., Ltd. [ 2.739125] usb 2-2: SerialNumber: SN0001 [ 2.741596] usb 3-2: new low-speed USB device number 2 using ohci-pci [ 2.752730] [drm] ring test on 5 succeeded in 1 usecs [ 2.772609] [drm] UVD initialized successfully. [ 2.774026] [drm] ib test on ring 0 succeeded in 0 usecs [ 2.774151] [drm] ib test on ring 3 succeeded in 0 usecs [ 2.854952] usb 4-2: New USB device found, idVendor=03f0, idProduct=311d [ 2.854968] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.910879] usb 3-2: New USB device found, idVendor=04f3, idProduct=02f4 [ 2.910894] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.910903] usb 3-2: Product: 2.4G Wireless Mouse [ 2.921488] hidraw: raw HID events driver (C) Jiri Kosina [ 2.932452] usbcore: registered new interface driver usbhid [ 2.932459] usbhid: USB HID core driver [ 2.937000] input: 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:04F3:02F4.0001/input/input7 [ 2.937353] hid-generic 0003:04F3:02F4.0001: input,hiddev0,hidraw0: USB HID v1.11 Mouse [2.4G Wireless Mouse] on usb-0000:00:12.0-2/input0 [ 2.985833] usb 1-3.1: new high-speed USB device number 4 using ehci-pci [ 3.083649] usb 1-3.1: New USB device found, idVendor=07ca, idProduct=1871 [ 3.083665] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.083674] usb 1-3.1: Product: TD310 Device [ 3.083681] usb 1-3.1: Manufacturer: AVerMedia [ 3.083688] usb 1-3.1: SerialNumber: 308218500074 [ 3.113862] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.115841] ata1.00: ATA-8: ST320LT020-9YG142, 0001HPM1, max UDMA/133 [ 3.115857] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.117684] ata1.00: configured for UDMA/133 [ 3.118190] scsi 0:0:0:0: Direct-Access ATA ST320LT020-9YG14 HPM1 PQ: 0 ANSI: 5 [ 3.118874] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.118953] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 3.118962] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.119160] sd 0:0:0:0: [sda] Write Protect is off [ 3.119167] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.119214] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.121768] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.123977] ata2.00: ATAPI: hp CDDVDW SN-208BB, HH01, max UDMA/100 [ 3.126759] ata2.00: configured for UDMA/100 [ 3.129211] scsi 1:0:0:0: CD-ROM hp CDDVDW SN-208BB HH01 PQ: 0 ANSI: 5 [ 3.143721] sr 1:0:0:0: [sr0] scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.143737] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.144127] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.144335] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.153879] tsc: Refined TSC clocksource calibration: 1646.501 MHz [ 3.157851] usb 1-3.2: new high-speed USB device number 5 using ehci-pci [ 3.226957] sda: sda1 sda2 < sda5 > [ 3.228130] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.292093] usb 1-3.2: New USB device found, idVendor=0939, idProduct=0b16 [ 3.292110] usb 1-3.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 3.292121] usb 1-3.2: Product: StorE HDD [ 3.292128] usb 1-3.2: Manufacturer: Toshiba [ 3.292135] usb 1-3.2: SerialNumber: 201012044C3D [ 3.293703] [drm] ib test on ring 5 succeeded [ 3.302055] usb-storage 1-3.2:1.0: USB Mass Storage device detected [ 3.302404] scsi host2: usb-storage 1-3.2:1.0 [ 3.302951] usbcore: registered new interface driver usb-storage [ 3.306370] usbcore: registered new interface driver uas [ 3.373818] [drm] radeon atom DIG backlight initialized [ 3.373832] [drm] Radeon Display Connectors [ 3.373835] [drm] Connector 0: [ 3.373838] [drm] LVDS-1 [ 3.373840] [drm] HPD1 [ 3.373845] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 3.373847] [drm] Encoders: [ 3.373850] [drm] LCD1: INTERNAL_UNIPHY [ 3.373852] [drm] Connector 1: [ 3.373854] [drm] HDMI-A-1 [ 3.373856] [drm] HPD2 [ 3.373859] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 3.373861] [drm] Encoders: [ 3.373863] [drm] DFP1: INTERNAL_UNIPHY [ 3.373865] [drm] Connector 2: [ 3.373867] [drm] VGA-1 [ 3.373870] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 [ 3.373872] [drm] Encoders: [ 3.373874] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 3.381777] usb 1-3.3: new low-speed USB device number 6 using ehci-pci [ 3.510778] usb 1-3.3: New USB device found, idVendor=04d9, idProduct=1603 [ 3.510794] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.510803] usb 1-3.3: Product: USB Keyboard [ 3.510811] usb 1-3.3: Manufacturer: [ 3.523940] input: USB Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.3/1-3.3:1.0/0003:04D9:1603.0002/input/input8 [ 3.578830] hid-generic 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:12.2-3.3/input0 [ 3.597780] input: USB Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.3/1-3.3:1.1/0003:04D9:1603.0003/input/input9 [ 3.645104] psmouse serio1: synaptics: queried max coordinates: x [..5634], y [..4598] [ 3.654728] hid-generic 0003:04D9:1603.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:12.2-3.3/input1 [ 3.729021] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1680, fw id: 706145 [ 3.741862] usb 1-3.4: new low-speed USB device number 7 using ehci-pci [ 3.785192] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 3.828381] [drm] fb mappable at 0xE0478000 [ 3.828388] [drm] vram apper at 0xE0000000 [ 3.828391] [drm] size 5767168 [ 3.828393] [drm] fb depth is 24 [ 3.828395] [drm] pitch is 5632 [ 3.828863] fbcon: radeondrmfb (fb0) is primary device [ 3.828927] Console: switching to colour frame buffer device 160x48 [ 3.828984] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device [ 3.828988] radeon 0000:00:01.0: registered panic notifier [ 3.831858] [drm] Initialized radeon 2.40.0 20080528 for 0000:00:01.0 on minor 0 [ 3.908573] usb 1-3.4: New USB device found, idVendor=1130, idProduct=6606 [ 3.908583] usb 1-3.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 3.908588] usb 1-3.4: Product: U+P Mouse [ 3.913505] input: U+P Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.4/1-3.4:1.0/0003:1130:6606.0004/input/input10 [ 3.914047] hid-generic 0003:1130:6606.0004: input,hidraw3: USB HID v1.10 Mouse [U+P Mouse ] on usb-0000:00:12.2-3.4/input0 [ 4.154465] Switched to clocksource tsc [ 4.309048] scsi 2:0:0:0: Direct-Access Toshiba StorE HDD 0000 PQ: 0 ANSI: 4 [ 4.310427] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 4.312861] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 4.319728] sd 2:0:0:0: [sdb] Write Protect is off [ 4.319750] sd 2:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 4.326638] sd 2:0:0:0: [sdb] No Caching mode page found [ 4.326652] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 4.843989] random: nonblocking pool is initialized [ 5.395681] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 8.525799] sdb: sdb1 [ 8.540955] sd 2:0:0:0: [sdb] Attached SCSI disk [ 15.435669] Adding 3778556k swap on /dev/sda5. Priority:-1 extents:1 across:3778556k FS [ 15.676038] systemd-udevd[321]: starting version 204 [ 15.893043] lp: driver loaded but no devices found [ 15.925918] ppdev: user-space parallel port driver [ 16.203641] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 16.209099] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 16.230308] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.285354] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input11 [ 16.317705] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 16.317721] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 16.317726] sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 16.317730] sound hdaudioC1D0: mono: mono_out=0x0 [ 16.317734] sound hdaudioC1D0: inputs: [ 16.317739] sound hdaudioC1D0: Mic=0x18 [ 16.317744] sound hdaudioC1D0: Internal Mic=0x12 [ 16.324330] Bluetooth: Core ver 2.20 [ 16.326248] NET: Registered protocol family 31 [ 16.326258] Bluetooth: HCI device and connection manager initialized [ 16.326272] Bluetooth: HCI socket layer initialized [ 16.326278] Bluetooth: L2CAP socket layer initialized [ 16.326304] Bluetooth: SCO socket layer initialized [ 16.331995] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input12 [ 16.332235] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input13 [ 16.346274] usbcore: registered new interface driver btusb [ 16.396009] cfg80211: Calling CRDA to update world regulatory domain [ 16.511277] media: Linux media interface: v0.10 [ 16.543966] audit: type=1400 audit(1512675936.607:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=418 comm="apparmor_parser" [ 16.543986] audit: type=1400 audit(1512675936.607:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=418 comm="apparmor_parser" [ 16.543996] audit: type=1400 audit(1512675936.607:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=418 comm="apparmor_parser" [ 16.547456] ath: phy0: ASPM enabled: 0x42 [ 16.547465] ath: EEPROM regdomain: 0x60 [ 16.547468] ath: EEPROM indicates we should expect a direct regpair map [ 16.547474] ath: Country alpha2 being used: 00 [ 16.547476] ath: Regpair used: 0x60 [ 16.585073] Linux video capture interface: v2.00 [ 16.607602] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 16.608972] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90004a80000, irq=23 [ 16.613284] uvcvideo: Found UVC 1.00 device HP Webcam-101 (04f2:b249) [ 16.635625] input: HP Webcam-101 as /devices/pci0000:00/0000:00:16.2/usb2/2-2/2-2:1.0/input/input14 [ 16.635849] usbcore: registered new interface driver uvcvideo [ 16.635853] USB Video Class driver (1.1.1) [ 16.793134] kvm: disabled by bios [ 16.944455] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 17.151088] input: HP WMI hotkeys as /devices/virtual/input/input15 [ 17.169167] usbcore: registered new interface driver ath3k [ 17.184508] usb 4-2: USB disconnect, device number 2 [ 17.516640] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20141107/dsopcode-236) [ 17.516657] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff8801028bab90), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 17.516676] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8801028bb1b8), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 17.517002] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20141107/dsopcode-236) [ 17.517011] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff8801028bab90), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 17.517026] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8801028bb1b8), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 17.525385] cfg80211: World regulatory domain updated: [ 17.525398] cfg80211: DFS Master region: unset [ 17.525401] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 17.525407] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 17.525411] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 17.525415] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 17.525419] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 17.525423] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 17.863414] usb 4-2: new full-speed USB device number 3 using ohci-pci [ 18.024690] usb 4-2: New USB device found, idVendor=0cf3, idProduct=3005 [ 18.024705] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 18.548215] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20141107/dsopcode-236) [ 18.548233] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff8801028bab90), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 18.548255] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8801028bb1b8), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 18.580013] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20141107/dsopcode-236) [ 18.580031] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff8801028bab90), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 18.580053] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8801028bb1b8), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 18.997630] init: failsafe main process (692) killed by TERM signal [ 21.583547] Bluetooth: RFCOMM TTY layer initialized [ 21.583571] Bluetooth: RFCOMM socket layer initialized [ 21.583585] Bluetooth: RFCOMM ver 1.11 [ 21.692923] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.692932] Bluetooth: BNEP filters: protocol multicast [ 21.692943] Bluetooth: BNEP socket layer initialized [ 22.000212] audit: type=1400 audit(1512675942.063:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=826 comm="apparmor_parser" [ 22.000235] audit: type=1400 audit(1512675942.063:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=826 comm="apparmor_parser" [ 22.843792] audit: type=1400 audit(1512675942.903:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=888 comm="apparmor_parser" [ 22.843816] audit: type=1400 audit(1512675942.903:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=888 comm="apparmor_parser" [ 22.849377] audit: type=1400 audit(1512675942.911:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=889 comm="apparmor_parser" [ 22.849404] audit: type=1400 audit(1512675942.911:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=889 comm="apparmor_parser" [ 22.849416] audit: type=1400 audit(1512675942.911:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=889 comm="apparmor_parser" [ 22.853727] audit: type=1400 audit(1512675942.915:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=894 comm="apparmor_parser" [ 22.855371] audit: type=1400 audit(1512675942.915:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=893 comm="apparmor_parser" [ 22.855396] audit: type=1400 audit(1512675942.915:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=893 comm="apparmor_parser" [ 23.216921] init: cups main process (827) killed by HUP signal [ 23.216954] init: cups main process ended, respawning [ 23.323404] init: samba-ad-dc main process (769) terminated with status 1 [ 24.459119] r8169 0000:06:00.0 eth0: link down [ 24.459299] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.504241] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 26.950529] wlan0: authenticate with 00:04:0e:e4:65:11 [ 26.970116] wlan0: send auth to 00:04:0e:e4:65:11 (try 1/3) [ 26.975590] wlan0: authenticated [ 26.975979] ath9k 0000:07:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 26.975986] ath9k 0000:07:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 26.976643] wlan0: associate with 00:04:0e:e4:65:11 (try 1/3) [ 26.980252] wlan0: RX AssocResp from 00:04:0e:e4:65:11 (capab=0x451 status=0 aid=4) [ 26.980403] wlan0: associated [ 26.980540] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 27.029039] wlan0: deauthenticating from 00:04:0e:e4:65:11 by local choice (Reason: 2=PREV_AUTH_NOT_VALID) [ 27.037031] cfg80211: Calling CRDA to update world regulatory domain [ 27.037339] wlan0: authenticate with 00:04:0e:e4:65:11 [ 27.050622] wlan0: send auth to 00:04:0e:e4:65:11 (try 1/3) [ 27.052588] wlan0: authenticated [ 27.052943] ath9k 0000:07:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 27.052952] ath9k 0000:07:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 27.056659] wlan0: associate with 00:04:0e:e4:65:11 (try 1/3) [ 27.061028] wlan0: RX AssocResp from 00:04:0e:e4:65:11 (capab=0x451 status=0 aid=4) [ 27.061170] wlan0: associated [ 27.069173] cfg80211: World regulatory domain updated: [ 27.069186] cfg80211: DFS Master region: unset [ 27.069190] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 27.069196] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 27.069200] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 27.069204] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 27.069208] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 27.069212] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 27.112695] init: plymouth-upstart-bridge main process ended, respawning [ 27.144144] init: plymouth-upstart-bridge main process (1182) terminated with status 1 [ 27.144187] init: plymouth-upstart-bridge main process ended, respawning [ 27.606209] init: plymouth-stop pre-start process (1213) terminated with status 1 [ 34.123358] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20141107/dsopcode-236) [ 34.123377] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff8801028bab90), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 34.123398] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8801028bb1b8), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 52.207253] audit_printk_skb: 42 callbacks suppressed [ 52.207263] audit: type=1400 audit(1512675972.269:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1716 comm="apparmor_parser" [ 52.207285] audit: type=1400 audit(1512675972.269:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1716 comm="apparmor_parser" [ 1775.862199] audit: type=1400 audit(1512677696.016:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2694 comm="apparmor_parser" [ 1775.862229] audit: type=1400 audit(1512677696.016:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2694 comm="apparmor_parser" [12818.122925] perf interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Was habe ich schon getan? Nun, linux-firmware-nonfree installiert.
Gelöst hat es das Problem nicht.
Hat jemand eine Idee?
