Hallo,
vielen Dank für die Antwort. Um einem Missverständnis vorzubeugen, das Yoga wird über einen proprietären Stecker mit der Dockingstation verbunden. Da es auch eine USB2 Dockingstation gibt, habe darauf hingewiesen. Im Log sieht man, dass sich im wesentlichen nur USB3 Geräte verbinden.
Folgende die Logs:
Anmerkung: Da nichts nicht geloggt wird, während sich das LAN immer wieder neu verwendet, habe ich den Stecker mal mit Log ein und ausgezogen. Dazwischen befindet sich auch eine Logitechmaus... bitte nicht stören lassen ☺
udevadmin monitor
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent
KERNEL[223.336170] change /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C09:00/ACPI0003:00/power_supply/AC (power_supply)
UDEV [223.338618] change /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C09:00/ACPI0003:00/power_supply/AC (power_supply)
KERNEL[223.342298] add /devices/pci0000:00/0000:00:14.0/usb2/2-3 (usb)
KERNEL[223.342698] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0 (usb)
UDEV [223.360248] add /devices/pci0000:00/0000:00:14.0/usb2/2-3 (usb)
UDEV [223.362319] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0 (usb)
KERNEL[223.709205] add /devices/pci0000:00/0000:00:14.0/usb3/3-3 (usb)
KERNEL[223.710616] add /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0 (usb)
UDEV [223.722111] add /devices/pci0000:00/0000:00:14.0/usb3/3-3 (usb)
UDEV [223.723455] add /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0 (usb)
KERNEL[223.812569] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2 (usb)
KERNEL[223.812910] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2:1.0 (usb)
UDEV [223.825718] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2 (usb)
UDEV [223.831008] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2:1.0 (usb)
KERNEL[223.840120] change /devices/pci0000:00/0000:00:02.0/drm/card0 (drm)
UDEV [223.841186] change /devices/pci0000:00/0000:00:02.0/drm/card0 (drm)
KERNEL[224.107186] add /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1 (usb)
KERNEL[224.111879] add /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0 (usb)
KERNEL[224.431296] add /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0/net/eth0 (net)
KERNEL[224.431317] add /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0/net/eth0/queues/rx-0 (queues)
KERNEL[224.431327] add /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0/net/eth0/queues/tx-0 (queues)
UDEV [224.456391] add /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1 (usb)
UDEV [224.465339] add /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0 (usb)
UDEV [224.468268] add /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0/net/eth0 (net)
UDEV [224.471050] add /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0/net/eth0/queues/rx-0 (queues)
UDEV [224.471199] add /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0/net/eth0/queues/tx-0 (queues)
KERNEL[226.806089] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1 (usb)
KERNEL[226.806680] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.0 (usb)
KERNEL[226.827027] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.0/sound/card1 (sound)
KERNEL[226.827311] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.0/sound/card1/pcmC1D0p (sound)
KERNEL[226.827473] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.0/sound/card1/pcmC1D0c (sound)
KERNEL[226.827620] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.0/sound/card1/controlC1 (sound)
KERNEL[226.827773] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.1 (usb)
KERNEL[226.827800] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.2 (usb)
KERNEL[226.827841] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.3 (usb)
KERNEL[226.828755] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.3/0003:17EF:3049.0004 (hid)
KERNEL[226.829623] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.3/input/input17 (input)
KERNEL[226.829737] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.3/input/input17/event8 (input)
KERNEL[226.829819] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.3/0003:17EF:3049.0004/hidraw/hidraw1 (hidraw)
UDEV [226.855191] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1 (usb)
UDEV [226.858486] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.1 (usb)
UDEV [226.859476] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.2 (usb)
UDEV [226.859704] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.0 (usb)
UDEV [226.862324] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.0/sound/card1 (sound)
UDEV [226.862379] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.3 (usb)
UDEV [226.864914] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.0/sound/card1/pcmC1D0c (sound)
UDEV [226.865476] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.0/sound/card1/pcmC1D0p (sound)
UDEV [226.866411] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.3/0003:17EF:3049.0004 (hid)
UDEV [226.866767] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.3/input/input17 (input)
UDEV [226.867197] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.3/0003:17EF:3049.0004/hidraw/hidraw1 (hidraw)
KERNEL[226.868599] change /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.0/sound/card1 (sound)
UDEV [226.868624] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.3/input/input17/event8 (input)
UDEV [226.878283] add /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.0/sound/card1/controlC1 (sound)
UDEV [226.879060] change /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.0/sound/card1 (sound)
KERNEL[303.642045] add /devices/pci0000:00/0000:00:14.0/usb2/2-1 (usb)
KERNEL[303.642723] add /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0 (usb)
KERNEL[303.645468] add /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:046D:C00E.0005 (hid)
KERNEL[303.645753] add /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/input/input18 (input)
KERNEL[303.645919] add /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/input/input18/mouse4 (input)
KERNEL[303.645956] add /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/input/input18/event17 (input)
KERNEL[303.646034] add /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:046D:C00E.0005/hidraw/hidraw2 (hidraw)
UDEV [303.670942] add /devices/pci0000:00/0000:00:14.0/usb2/2-1 (usb)
UDEV [303.673498] add /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0 (usb)
UDEV [303.676391] add /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:046D:C00E.0005 (hid)
UDEV [303.679326] add /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/input/input18 (input)
UDEV [303.679659] add /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:046D:C00E.0005/hidraw/hidraw2 (hidraw)
UDEV [303.684937] add /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/input/input18/mouse4 (input)
UDEV [303.688197] add /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/input/input18/event17 (input)
KERNEL[389.731275] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.0/sound/card1/pcmC1D0p (sound)
KERNEL[389.731928] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.0/sound/card1/pcmC1D0c (sound)
UDEV [389.733037] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.0/sound/card1/pcmC1D0p (sound)
UDEV [389.734072] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.0/sound/card1/pcmC1D0c (sound)
KERNEL[389.735849] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.0/sound/card1/controlC1 (sound)
KERNEL[389.735878] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.0/sound/card1 (sound)
KERNEL[389.735912] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.0 (usb)
KERNEL[389.735988] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.1 (usb)
KERNEL[389.736104] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.2 (usb)
KERNEL[389.737359] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.3/input/input17/event8 (input)
UDEV [389.738410] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.0/sound/card1/controlC1 (sound)
UDEV [389.750332] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.3/input/input17/event8 (input)
KERNEL[389.750383] change /devices/pci0000:00/0000:00:02.0/drm/card0 (drm)
UDEV [389.750421] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.2 (usb)
UDEV [389.750479] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.0/sound/card1 (sound)
UDEV [389.750522] change /devices/pci0000:00/0000:00:02.0/drm/card0 (drm)
UDEV [389.750555] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.1 (usb)
UDEV [389.750582] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.0 (usb)
KERNEL[389.796112] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.3/input/input17 (input)
KERNEL[389.796148] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.3/0003:17EF:3049.0004/hidraw/hidraw1 (hidraw)
KERNEL[389.796159] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.3/0003:17EF:3049.0004 (hid)
KERNEL[389.796177] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.3 (usb)
KERNEL[389.796550] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1 (usb)
KERNEL[389.796679] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2:1.0 (usb)
UDEV [389.796747] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.3/input/input17 (input)
UDEV [389.796762] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.3/0003:17EF:3049.0004/hidraw/hidraw1 (hidraw)
KERNEL[389.797065] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2 (usb)
UDEV [389.797079] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2:1.0 (usb)
KERNEL[389.797145] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0 (usb)
UDEV [389.798232] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.3/0003:17EF:3049.0004 (hid)
UDEV [389.798245] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0 (usb)
UDEV [389.798254] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.3 (usb)
KERNEL[389.798365] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3 (usb)
UDEV [389.801137] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1 (usb)
UDEV [389.805856] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2 (usb)
UDEV [389.809621] remove /devices/pci0000:00/0000:00:14.0/usb2/2-3 (usb)
KERNEL[389.925457] remove /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0/net/eth0/queues/rx-0 (queues)
KERNEL[389.925485] remove /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0/net/eth0/queues/tx-0 (queues)
KERNEL[389.925634] remove /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0/net/eth0 (net)
UDEV [389.926920] remove /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0/net/eth0/queues/rx-0 (queues)
UDEV [389.926939] remove /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0/net/eth0/queues/tx-0 (queues)
UDEV [389.929769] remove /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0/net/eth0 (net)
KERNEL[390.164208] remove /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0 (usb)
KERNEL[390.165322] remove /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1 (usb)
UDEV [390.165343] remove /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0 (usb)
KERNEL[390.165357] remove /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0 (usb)
UDEV [390.165369] remove /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0 (usb)
KERNEL[390.165399] remove /devices/pci0000:00/0000:00:14.0/usb3/3-3 (usb)
UDEV [390.170309] remove /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1 (usb)
UDEV [390.179252] remove /devices/pci0000:00/0000:00:14.0/usb3/3-3 (usb)
KERNEL[390.362605] change /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C09:00/ACPI0003:00/power_supply/AC (power_supply)
UDEV [390.363650] change /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C09:00/ACPI0003:00/power_supply/AC (power_supply)
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11.0-15-generic (buildd@batsu) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #23-Ubuntu SMP Mon Dec 9 18:17:04 UTC 2013 (Ubuntu 3.11.0-15.23-generic 3.11.10)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.11.0-15-generic.efi.signed root=UUID=23162e3c-e08c-48d0-8385-2cac3ed8746a ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000008bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008c000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cc50cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cc50d000-0x00000000cc70efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cc70f000-0x00000000db39dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db39e000-0x00000000dce7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dce7f000-0x00000000dcf7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dcf7f000-0x00000000dcffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dcfff000-0x00000000dcffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by Lenovo
[ 0.000000] efi: ACPI=0xdcffe000 ACPI 2.0=0xdcffe014 SMBIOS=0xdce7e000
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=4, attr=0xf, range=[0x0000000000001000-0x0000000000002000) (0MB)
[ 0.000000] efi: mem02: type=3, attr=0xf, range=[0x0000000000002000-0x000000000000c000) (0MB)
[ 0.000000] efi: mem03: type=7, attr=0xf, range=[0x000000000000c000-0x0000000000058000) (0MB)
[ 0.000000] efi: mem04: type=0, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
[ 0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000000059000-0x0000000000069000) (0MB)
[ 0.000000] efi: mem06: type=4, attr=0xf, range=[0x0000000000069000-0x000000000006b000) (0MB)
[ 0.000000] efi: mem07: type=3, attr=0xf, range=[0x000000000006b000-0x000000000008c000) (0MB)
[ 0.000000] efi: mem08: type=0, attr=0xf, range=[0x000000000008c000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem09: type=0, attr=0x0, range=[0x00000000000e0000-0x0000000000100000) (0MB)
[ 0.000000] efi: mem10: type=3, attr=0xf, range=[0x0000000000100000-0x0000000000110000) (0MB)
[ 0.000000] efi: mem11: type=2, attr=0xf, range=[0x0000000000110000-0x0000000001503000) (19MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000001503000-0x0000000002000000) (10MB)
[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x0000000002000000-0x00000000033f3000) (19MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x00000000033f3000-0x0000000035eb2000) (810MB)
[ 0.000000] efi: mem15: type=2, attr=0xf, range=[0x0000000035eb2000-0x0000000036f51000) (16MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000036f51000-0x0000000096899000) (1529MB)
[ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x0000000096899000-0x00000000ca56f000) (828MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000ca56f000-0x00000000ca58f000) (0MB)
[ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x00000000ca58f000-0x00000000cc33c000) (29MB)
[ 0.000000] efi: mem20: type=2, attr=0xf, range=[0x00000000cc33c000-0x00000000cc4f6000) (1MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000cc4f6000-0x00000000cc50d000) (0MB)
[ 0.000000] efi: mem22: type=0, attr=0xf, range=[0x00000000cc50d000-0x00000000cc70f000) (2MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000cc70f000-0x00000000cd55f000) (14MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000cd55f000-0x00000000cd59c000) (0MB)
[ 0.000000] efi: mem25: type=2, attr=0xf, range=[0x00000000cd59c000-0x00000000cd59e000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000cd59e000-0x00000000cd66a000) (0MB)
[ 0.000000] efi: mem27: type=1, attr=0xf, range=[0x00000000cd66a000-0x00000000cd79e000) (1MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x00000000cd79e000-0x00000000d028a000) (42MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000d028a000-0x00000000d144a000) (17MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000d144a000-0x00000000d145e000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000d145e000-0x00000000d279e000) (19MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000d279e000-0x00000000d2cdf000) (5MB)
[ 0.000000] efi: mem33: type=2, attr=0xf, range=[0x00000000d2cdf000-0x00000000d2ce9000) (0MB)
[ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x00000000d2ce9000-0x00000000db39e000) (134MB)
[ 0.000000] efi: mem35: type=5, attr=0x800000000000000f, range=[0x00000000db39e000-0x00000000db59e000) (2MB)
[ 0.000000] efi: mem36: type=6, attr=0x800000000000000f, range=[0x00000000db59e000-0x00000000dcb7f000) (21MB)
[ 0.000000] efi: mem37: type=0, attr=0xf, range=[0x00000000dcb7f000-0x00000000dce7f000) (3MB)
[ 0.000000] efi: mem38: type=10, attr=0xf, range=[0x00000000dce7f000-0x00000000dcf7f000) (1MB)
[ 0.000000] efi: mem39: type=9, attr=0xf, range=[0x00000000dcf7f000-0x00000000dcfff000) (0MB)
[ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000dcfff000-0x00000000dd000000) (0MB)
[ 0.000000] efi: mem41: type=7, attr=0xf, range=[0x0000000100000000-0x000000021f600000) (4598MB)
[ 0.000000] efi: mem42: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem43: type=0, attr=0x0, range=[0x00000000dd000000-0x00000000dfa00000) (42MB)
[ 0.000000] efi: mem44: type=11, attr=0x8000000000000001, range=[0x00000000f80f8000-0x00000000f80f9000) (0MB)
[ 0.000000] efi: mem45: type=0, attr=0x0, range=[0x00000000fe101000-0x00000000fe113000) (0MB)
[ 0.000000] efi: mem46: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem47: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
[ 0.000000] efi: mem48: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
[ 0.000000] efi: mem49: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
[ 0.000000] efi: mem50: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
[ 0.000000] efi: mem51: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
[ 0.000000] efi: mem52: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
[ 0.000000] efi: mem53: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20CD0038GE/20CD0038GE, BIOS GQET28WW (1.08 ) 11/01/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 1 base 00DE000000 mask 7FFE000000 uncachable
[ 0.000000] 2 base 00DD000000 mask 7FFF000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xdd000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff88000005f000] 5f000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02fd1000, 0x02fd1fff] PGTABLE
[ 0.000000] BRK [0x02fd2000, 0x02fd2fff] PGTABLE
[ 0.000000] BRK [0x02fd3000, 0x02fd3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21f400000-0x21f5fffff]
[ 0.000000] [mem 0x21f400000-0x21f5fffff] page 2M
[ 0.000000] BRK [0x02fd4000, 0x02fd4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21f3fffff]
[ 0.000000] [mem 0x21c000000-0x21f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcc50cfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xcc3fffff] page 2M
[ 0.000000] [mem 0xcc400000-0xcc50cfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcc70f000-0xdb39dfff]
[ 0.000000] [mem 0xcc70f000-0xcc7fffff] page 4k
[ 0.000000] [mem 0xcc800000-0xdb1fffff] page 2M
[ 0.000000] [mem 0xdb200000-0xdb39dfff] page 4k
[ 0.000000] BRK [0x02fd5000, 0x02fd5fff] PGTABLE
[ 0.000000] BRK [0x02fd6000, 0x02fd6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xdcfff000-0xdcffffff]
[ 0.000000] [mem 0xdcfff000-0xdcffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x35eb2000-0x36f50fff]
[ 0.000000] ACPI: RSDP 00000000dcffe014 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000dcffe170 000A4 (v01 LENOVO TP-GQ 00001080 PTEC 00000002)
[ 0.000000] ACPI: FACP 00000000dcffa000 0010C (v05 LENOVO TP-GQ 00001080 PTEC 00000002)
[ 0.000000] ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20130517/tbfadt-202)
[ 0.000000] ACPI: DSDT 00000000dcfe9000 0CAF1 (v02 LENOVO TP-GQ 00001080 INTL 20120711)
[ 0.000000] ACPI: FACS 00000000dcf49000 00040
[ 0.000000] ACPI: SLIC 00000000dcffd000 00176 (v01 LENOVO TP-GQ 00001080 PTEC 00000001)
[ 0.000000] ACPI: ASF! 00000000dcffc000 000A5 (v32 LENOVO TP-GQ 00001080 PTEC 00000002)
[ 0.000000] ACPI: HPET 00000000dcff9000 00038 (v01 LENOVO TP-GQ 00001080 PTEC 00000002)
[ 0.000000] ACPI: LPIT 00000000dcff8000 0005C (v01 LENOVO TP-GQ 00001080 PTEC 00000002)
[ 0.000000] ACPI: APIC 00000000dcff7000 00098 (v01 LENOVO TP-GQ 00001080 PTEC 00000002)
[ 0.000000] ACPI: MCFG 00000000dcff6000 0003C (v01 LENOVO TP-GQ 00001080 PTEC 00000002)
[ 0.000000] ACPI: SSDT 00000000dcfe8000 00539 (v01 LENOVO Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 00000000dcfe7000 00AD8 (v01 LENOVO CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 00000000dcfe3000 0351B (v01 LENOVO SaSsdt 00003000 INTL 20120711)
[ 0.000000] ACPI: UEFI 00000000dcfe2000 00042 (v01 LENOVO TP-GQ 00001080 PTEC 00000002)
[ 0.000000] ACPI: MSDM 00000000dcf43000 00055 (v03 LENOVO TP-GQ 00001080 PTEC 00000002)
[ 0.000000] ACPI: BATB 00000000dcfe1000 00046 (v01 LENOVO TP-GQ 00001080 PTEC 00000002)
[ 0.000000] ACPI: FPDT 00000000dcfe0000 00064 (v01 LENOVO TP-GQ 00001080 PTEC 00000002)
[ 0.000000] ACPI: UEFI 00000000dcfdf000 002E2 (v01 LENOVO TP-GQ 00001080 PTEC 00000002)
[ 0.000000] ACPI: SSDT 00000000dcfde000 00A3A (v01 LENOVO IsctTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21f5fffff]
[ 0.000000] NODE_DATA [mem 0x21f5f8000-0x21f5fcfff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216c00000-ffff88021ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00057fff]
[ 0.000000] node 0: [mem 0x00059000-0x0008bfff]
[ 0.000000] node 0: [mem 0x00100000-0xcc50cfff]
[ 0.000000] node 0: [mem 0xcc70f000-0xdb39dfff]
[ 0.000000] node 0: [mem 0xdcfff000-0xdcffffff]
[ 0.000000] node 0: [mem 0x100000000-0x21f5fffff]
[ 0.000000] On node 0 totalpages: 2074407
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 73 pages reserved
[ 0.000000] DMA zone: 3978 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13959 pages used for memmap
[ 0.000000] DMA32 zone: 893341 pages, LIFO batch:31
[ 0.000000] Normal zone: 18392 pages used for memmap
[ 0.000000] Normal zone: 1177088 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0008c000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc50d000-0xcc70efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb39e000-0xdce7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdce7f000-0xdcf7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdcf7f000-0xdcffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf80f7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfe100fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf80f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88021f200000 s86720 r8192 d23872 u262144
[ 0.000000] pcpu-alloc: s86720 r8192 d23872 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2041919
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11.0-15-generic.efi.signed root=UUID=23162e3c-e08c-48d0-8385-2cac3ed8746a ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7875048K/8297628K available (7149K kernel code, 1082K rwdata, 3312K rodata, 1364K init, 1420K bss, 422580K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-255.
[ 0.000000] NR_IRQS:16640 nr_irqs:1016 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2394.397 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.79 BogoMIPS (lpj=9577588)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000021] init_memory_mapping: [mem 0xdb39e000-0xdb59dfff]
[ 0.000023] [mem 0xdb39e000-0xdb59dfff] page 4k
[ 0.000043] init_memory_mapping: [mem 0xdb59e000-0xdcb7efff]
[ 0.000044] [mem 0xdb59e000-0xdb5fffff] page 4k
[ 0.000046] [mem 0xdb600000-0xdc9fffff] page 2M
[ 0.000047] [mem 0xdca00000-0xdcb7efff] page 4k
[ 0.047829] Security Framework initialized
[ 0.047851] AppArmor: AppArmor initialized
[ 0.047852] Yama: becoming mindful.
[ 0.048459] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.050438] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.051282] Mount-cache hash table entries: 256
[ 0.051481] Initializing cgroup subsys memory
[ 0.051490] Initializing cgroup subsys devices
[ 0.051492] Initializing cgroup subsys freezer
[ 0.051494] Initializing cgroup subsys blkio
[ 0.051495] Initializing cgroup subsys perf_event
[ 0.051499] Initializing cgroup subsys hugetlb
[ 0.051523] CPU: Physical Processor ID: 0
[ 0.051524] CPU: Processor Core ID: 0
[ 0.051529] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.051529] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.052706] mce: CPU supports 7 MCE banks
[ 0.052721] CPU0: Thermal monitoring enabled (TM1)
[ 0.052734] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.052734] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
[ 0.052734] tlb_flushall_shift: 6
[ 0.052870] Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
[ 0.055096] ACPI: Core revision 20130517
[ 0.068995] ACPI: All ACPI Tables successfully acquired
[ 0.077624] ftrace: allocating 27844 entries in 109 pages
[ 0.093199] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.132917] smpboot: CPU0: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz (fam: 06, model: 45, stepping: 01)
[ 0.132925] TSC deadline timer enabled
[ 0.132936] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.132943] ... version: 3
[ 0.132945] ... bit width: 48
[ 0.132946] ... generic registers: 4
[ 0.132947] ... value mask: 0000ffffffffffff
[ 0.132948] ... max period: 0000ffffffffffff
[ 0.132949] ... fixed-purpose events: 3
[ 0.132950] ... event mask: 000000070000000f
[ 0.149478] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.134852] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.178247] Brought up 4 CPUs
[ 0.178251] smpboot: Total of 4 processors activated (19155.17 BogoMIPS)
[ 0.183836] devtmpfs: initialized
[ 0.185149] EVM: security.selinux
[ 0.185151] EVM: security.SMACK64
[ 0.185153] EVM: security.capability
[ 0.185205] PM: Registering ACPI NVS region [mem 0xdce7f000-0xdcf7efff] (1048576 bytes)
[ 0.186134] regulator-dummy: no parameters
[ 0.186168] RTC time: 21:16:05, date: 01/26/14
[ 0.186207] NET: Registered protocol family 16
[ 0.186351] ACPI: bus type PCI registered
[ 0.186353] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.186520] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.186523] PCI: not using MMCONFIG
[ 0.186524] PCI: Using configuration type 1 for base access
[ 0.187514] bio: create slab <bio-0> at 0
[ 0.187681] ACPI: Added _OSI(Module Device)
[ 0.187684] ACPI: Added _OSI(Processor Device)
[ 0.187686] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.187687] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.190315] ACPI: EC: Look up EC in DSDT
[ 0.192917] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.196745] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.203792] ACPI: SSDT 00000000dce6ec18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.204455] ACPI: Dynamic OEM Table Load:
[ 0.204458] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.207944] ACPI: SSDT 00000000dce6e618 005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.208692] ACPI: Dynamic OEM Table Load:
[ 0.208694] ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.211763] ACPI: SSDT 00000000dce6fc18 00119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.212420] ACPI: Dynamic OEM Table Load:
[ 0.212421] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.217770] ACPI: Interpreter enabled
[ 0.217779] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[ 0.217788] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.217812] ACPI: (supports S0 S3 S4 S5)
[ 0.217814] ACPI: Using IOAPIC for interrupt routing
[ 0.217841] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.218277] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.226485] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.226649] ACPI: No dock devices found.
[ 0.244480] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.244625] \_SB_.PCI0:_OSC invalid UUID
[ 0.244627] _OSC request data:1 8 0
[ 0.244684] \_SB_.PCI0:_OSC invalid UUID
[ 0.244686] _OSC request data:1 1f 0
[ 0.244690] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.244692] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.245464] PCI host bridge to bus 0000:00
[ 0.245467] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.245470] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.245472] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.245474] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.245476] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 0.245485] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.245640] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.245654] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.245663] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.245669] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.245821] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.245831] pci 0000:00:03.0: reg 0x10: [mem 0xf0610000-0xf0613fff 64bit]
[ 0.246006] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.246025] pci 0000:00:14.0: reg 0x10: [mem 0xf0600000-0xf060ffff 64bit]
[ 0.246089] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.246191] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.246226] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.246248] pci 0000:00:16.0: reg 0x10: [mem 0xf0619000-0xf061901f 64bit]
[ 0.246322] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.246461] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.246476] pci 0000:00:1b.0: reg 0x10: [mem 0xf0614000-0xf0617fff 64bit]
[ 0.246543] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.246646] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.246676] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.246743] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.246847] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.246878] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[ 0.246946] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.247050] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.247082] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 0.247149] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.247293] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.247315] pci 0000:00:1d.0: reg 0x10: [mem 0xf061d000-0xf061d3ff]
[ 0.247410] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.247544] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.247784] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.247801] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
[ 0.247809] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
[ 0.247816] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
[ 0.247824] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
[ 0.247832] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.247840] pci 0000:00:1f.2: reg 0x24: [mem 0xf061c000-0xf061c7ff]
[ 0.247879] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.248001] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.248016] pci 0000:00:1f.3: reg 0x10: [mem 0xf0618000-0xf06180ff 64bit]
[ 0.248037] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.248217] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.248313] pci 0000:04:00.0: [8086:08b2] type 00 class 0x028000
[ 0.248355] pci 0000:04:00.0: reg 0x10: [mem 0xf0500000-0xf0501fff 64bit]
[ 0.248532] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.248874] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.257855] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.257860] pci 0000:00:1c.2: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.257939] pci 0000:05:00.0: [10ec:5227] type 00 class 0xff0000
[ 0.257957] pci 0000:05:00.0: reg 0x10: [mem 0xf0400000-0xf0400fff]
[ 0.258081] pci 0000:05:00.0: supports D1 D2
[ 0.258082] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.258112] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.265853] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.265859] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.266944] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.267001] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.267055] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.267111] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.267164] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.267217] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.267270] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.267323] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.267922] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.267930] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.268009] Found 1 acpi root devices
[ 0.268060] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.268155] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.268159] vgaarb: loaded
[ 0.268160] vgaarb: bridge control possible 0000:00:02.0
[ 0.268323] SCSI subsystem initialized
[ 0.268325] ACPI: bus type ATA registered
[ 0.268372] libata version 3.00 loaded.
[ 0.268388] ACPI: bus type USB registered
[ 0.268403] usbcore: registered new interface driver usbfs
[ 0.268410] usbcore: registered new interface driver hub
[ 0.268432] usbcore: registered new device driver usb
[ 0.268542] PCI: Using ACPI for IRQ routing
[ 0.270000] PCI: pci_cache_line_size set to 64 bytes
[ 0.270058] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.270059] e820: reserve RAM buffer [mem 0x0008c000-0x0008ffff]
[ 0.270061] e820: reserve RAM buffer [mem 0xcc50d000-0xcfffffff]
[ 0.270062] e820: reserve RAM buffer [mem 0xdb39e000-0xdbffffff]
[ 0.270064] e820: reserve RAM buffer [mem 0xdd000000-0xdfffffff]
[ 0.270065] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
[ 0.270144] NetLabel: Initializing
[ 0.270146] NetLabel: domain hash size = 128
[ 0.270147] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.270158] NetLabel: unlabeled traffic allowed by default
[ 0.270211] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.270217] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.272240] Switched to clocksource hpet
[ 0.277340] AppArmor: AppArmor Filesystem Enabled
[ 0.277362] pnp: PnP ACPI init
[ 0.277374] ACPI: bus type PNP registered
[ 0.277405] pnp 00:00: [dma 4]
[ 0.277426] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.277445] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.277576] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.277612] system 00:03: [io 0x0680-0x069f] has been reserved
[ 0.277615] system 00:03: [io 0xffff] has been reserved
[ 0.277617] system 00:03: [io 0xffff] has been reserved
[ 0.277619] system 00:03: [io 0xffff] has been reserved
[ 0.277621] system 00:03: [io 0x1800-0x18fe] could not be reserved
[ 0.277623] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.277626] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.277679] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.277726] system 00:05: [io 0x1854-0x1857] has been reserved
[ 0.277729] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.277972] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.278000] pnp 00:07: Plug and Play ACPI device, IDs LEN0042 PNP0f13 (active)
[ 0.278191] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.278193] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.278196] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.278198] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.278200] system 00:08: [mem 0xf8000000-0xfbffffff] could not be reserved
[ 0.278202] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.278204] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.278206] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.278208] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.278210] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.278213] system 00:08: [mem 0xdfa10000-0xdfa1ffff] has been reserved
[ 0.278215] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.278682] pnp 00:09: Plug and Play ACPI device, IDs PNP0c40 (active)
[ 0.278719] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c60 (active)
[ 0.278854] pnp: PnP ACPI: found 11 devices
[ 0.278856] ACPI: bus type PNP unregistered
[ 0.284983] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.284995] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.285000] pci 0000:00:1c.2: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.285007] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.285012] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.285235] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.285237] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.285239] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.285241] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[ 0.285243] pci_bus 0000:04: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.285245] pci_bus 0000:05: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.285277] NET: Registered protocol family 2
[ 0.285493] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.285706] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.285837] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.285856] TCP: reno registered
[ 0.285870] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.285901] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.285976] NET: Registered protocol family 1
[ 0.285987] pci 0000:00:02.0: Boot video device
[ 0.286064] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 0.286066] pci 0000:00:14.0: PCI INT A: no GSI
[ 0.286166] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 0.286341] PCI: CLS 64 bytes, default 64
[ 0.286386] Trying to unpack rootfs image as initramfs...
[ 0.635129] Freeing initrd memory: 17020K (ffff880035eb2000 - ffff880036f51000)
[ 0.635134] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.635137] software IO TLB [mem 0xc656f000-0xca56f000] (64MB) mapped at [ffff8800c656f000-ffff8800ca56efff]
[ 0.635304] Scanning for low memory corruption every 60 seconds
[ 0.635582] Initialise module verification
[ 0.635628] audit: initializing netlink socket (disabled)
[ 0.635642] type=2000 audit(1390770965.584:1): initialized
[ 0.669049] bounce pool size: 64 pages
[ 0.669059] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.670301] zbud: loaded
[ 0.670446] VFS: Disk quotas dquot_6.5.2
[ 0.670487] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.670950] fuse init (API version 7.22)
[ 0.671023] msgmni has been set to 15787
[ 0.671456] Key type asymmetric registered
[ 0.671459] Asymmetric key parser 'x509' registered
[ 0.671493] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.671530] io scheduler noop registered
[ 0.671533] io scheduler deadline registered (default)
[ 0.671557] io scheduler cfq registered
[ 0.671730] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.671743] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.671811] efifb: probing for efifb
[ 0.671997] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90004f00000, using 1216k, total 1216k
[ 0.671999] efifb: mode is 640x480x32, linelength=2560, pages=1
[ 0.672000] efifb: scrolling: redraw
[ 0.672001] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.673043] Console: switching to colour frame buffer device 80x30
[ 0.674003] fb0: EFI VGA frame buffer device
[ 0.674011] intel_idle: MWAIT substates: 0x11142120
[ 0.674012] intel_idle: v0.4 model 0x45
[ 0.674014] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.674683] ACPI: AC Adapter [AC] (on-line)
[ 0.674792] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.674797] ACPI: Power Button [PWRB]
[ 0.674830] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.675134] ACPI: Lid Switch [LID0]
[ 0.675168] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.675171] ACPI: Power Button [PWRF]
[ 0.675264] ACPI: Requesting acpi_cpufreq
[ 0.675695] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20130517/evregion-287)
[ 0.675701] ACPI Error: Method parse/execution failed [\_TZ_.TZ01._TMP] (Node ffff880213899eb0), AE_BAD_PARAMETER (20130517/psparse-536)
[ 0.675736] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20130517/evregion-287)
[ 0.675739] ACPI Error: Method parse/execution failed [\_TZ_.TZ01._TMP] (Node ffff880213899eb0), AE_BAD_PARAMETER (20130517/psparse-536)
[ 0.675777] GHES: HEST is not enabled!
[ 0.675859] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.677483] Linux agpgart interface v0.103
[ 0.678584] brd: module loaded
[ 0.679244] loop: module loaded
[ 0.679550] libphy: Fixed MDIO Bus: probed
[ 0.679627] tun: Universal TUN/TAP device driver, 1.6
[ 0.679629] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.679667] PPP generic driver version 2.4.2
[ 0.679705] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.679707] ehci-pci: EHCI PCI platform driver
[ 0.679812] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 0.679819] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.679825] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.679839] ehci-pci 0000:00:1d.0: debug port 2
[ 0.683746] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.683763] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf061d000
[ 0.692594] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.692614] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.692616] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.692618] usb usb1: Product: EHCI Host Controller
[ 0.692620] usb usb1: Manufacturer: Linux 3.11.0-15-generic ehci_hcd
[ 0.692622] usb usb1: SerialNumber: 0000:00:1d.0
[ 0.692749] hub 1-0:1.0: USB hub found
[ 0.692756] hub 1-0:1.0: 3 ports detected
[ 0.692876] ehci-platform: EHCI generic platform driver
[ 0.692883] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.692884] ohci-pci: OHCI PCI platform driver
[ 0.692892] ohci-platform: OHCI generic platform driver
[ 0.692898] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.692993] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[ 0.692995] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[ 0.693018] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 0.693021] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.693027] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.693100] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.693119] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
[ 0.693161] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.693163] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.693165] usb usb2: Product: xHCI Host Controller
[ 0.693166] usb usb2: Manufacturer: Linux 3.11.0-15-generic xhci_hcd
[ 0.693168] usb usb2: SerialNumber: 0000:00:14.0
[ 0.693241] xHCI xhci_add_endpoint called for root hub
[ 0.693242] xHCI xhci_check_bandwidth called for root hub
[ 0.693263] hub 2-0:1.0: USB hub found
[ 0.693271] hub 2-0:1.0: 9 ports detected
[ 0.695458] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.695462] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.695479] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.695481] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.695483] usb usb3: Product: xHCI Host Controller
[ 0.695485] usb usb3: Manufacturer: Linux 3.11.0-15-generic xhci_hcd
[ 0.695486] usb usb3: SerialNumber: 0000:00:14.0
[ 0.695555] xHCI xhci_add_endpoint called for root hub
[ 0.695557] xHCI xhci_check_bandwidth called for root hub
[ 0.695577] hub 3-0:1.0: USB hub found
[ 0.695583] hub 3-0:1.0: 4 ports detected
[ 0.700651] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.718988] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.718994] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.719100] mousedev: PS/2 mouse device common for all mice
[ 0.719341] rtc_cmos 00:04: RTC can wake from S4
[ 0.719462] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.719489] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.719547] device-mapper: uevent: version 1.0.3
[ 0.719604] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 0.719729] cpuidle: using governor ladder
[ 0.719897] cpuidle: using governor menu
[ 0.719910] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.719912] EFI Variables Facility v0.08 2004-May-17
[ 0.728921] TCP: cubic registered
[ 0.729013] NET: Registered protocol family 10
[ 0.729200] NET: Registered protocol family 17
[ 0.729213] Key type dns_resolver registered
[ 0.729438] PM: Hibernation image not present or could not be loaded.
[ 0.729442] Loading module verification certificates
[ 0.730469] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 9da89dd2daeca3a3cb171fe18502208f132adef8'
[ 0.730479] registered taskstats version 1
[ 0.732841] Key type trusted registered
[ 0.734836] Key type encrypted registered
[ 0.736779] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.737159] Magic number: 14:869:298
[ 0.737250] rtc_cmos 00:04: setting system clock to 2014-01-26 21:16:06 UTC (1390770966)
[ 0.738069] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.738071] EDD information not available.
[ 0.747535] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.902221] ACPI: Battery Slot [BAT0] (battery present)
[ 0.903130] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
[ 0.903131] Write protecting the kernel read-only data: 12288k
[ 0.904861] Freeing unused kernel memory: 1032K (ffff8800026fe000 - ffff880002800000)
[ 0.906066] Freeing unused kernel memory: 784K (ffff880002b3c000 - ffff880002c00000)
[ 0.917692] systemd-udevd[124]: starting version 204
[ 0.929174] usb 3-3: new SuperSpeed USB device number 2 using xhci_hcd
[ 0.935142] rtsx_pci 0000:05:00.0: irq 57 for MSI/MSI-X
[ 0.935156] rtsx_pci 0000:05:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 57
[ 0.936281] ahci 0000:00:1f.2: version 3.0
[ 0.936381] ahci 0000:00:1f.2: irq 58 for MSI/MSI-X
[ 0.936403] ahci: SSS flag set, parallel bus scan disabled
[ 0.948829] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[ 0.948833] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
[ 0.948838] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.949070] scsi0 : ahci
[ 0.949139] scsi1 : ahci
[ 0.949182] scsi2 : ahci
[ 0.949224] scsi3 : ahci
[ 0.949271] ata1: SATA max UDMA/133 abar m2048@0xf061c000 port 0xf061c100 irq 58
[ 0.949272] ata2: DUMMY
[ 0.949273] ata3: DUMMY
[ 0.949274] ata4: DUMMY
[ 1.177586] usb 3-3: New USB device found, idVendor=2109, idProduct=0812
[ 1.177591] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.177593] usb 3-3: Product: EDGE DOCK
[ 1.177595] usb 3-3: Manufacturer: LENOVO
[ 1.179200] hub 3-3:1.0: USB hub found
[ 1.179355] hub 3-3:1.0: 4 ports detected
[ 1.269130] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.271812] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.271817] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.271876] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 1.272068] ata1.00: supports DRM functions and may not be fully accessible
[ 1.272123] ata1.00: ATA-9: SAMSUNG MZ7TD256HAFV-000L9, DXT02L5Q, max UDMA/133
[ 1.272125] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.273242] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.273247] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.273321] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 1.273522] ata1.00: supports DRM functions and may not be fully accessible
[ 1.273678] ata1.00: configured for UDMA/133
[ 1.273931] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7TD256 DXT0 PQ: 0 ANSI: 5
[ 1.274085] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.274134] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.274141] sd 0:0:0:0: [sda] Write Protect is off
[ 1.274146] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.274165] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.276119] sda: sda1 sda2 sda3 sda4 sda5 sda7 sda8 sda9
[ 1.276922] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.293096] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.429566] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.429572] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.429842] hub 1-1:1.0: USB hub found
[ 1.429912] hub 1-1:1.0: 8 ports detected
[ 1.441890] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 1.592512] Adding 976892k swap on /dev/sda8. Priority:-1 extents:1 across:976892k SSFS
[ 1.597329] usb 2-3: new high-speed USB device number 2 using xhci_hcd
[ 1.615038] usb 2-3: New USB device found, idVendor=2109, idProduct=2812
[ 1.615042] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.615044] usb 2-3: Product: EDGE DOCK
[ 1.615046] usb 2-3: Manufacturer: LENOVO
[ 1.615450] hub 2-3:1.0: USB hub found
[ 1.615595] hub 2-3:1.0: 4 ports detected
[ 1.633355] tsc: Refined TSC clocksource calibration: 2394.458 MHz
[ 1.789483] usb 2-4: new full-speed USB device number 3 using xhci_hcd
[ 1.806576] usb 2-4: New USB device found, idVendor=8087, idProduct=07dc
[ 1.806581] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.973661] usb 2-5: new full-speed USB device number 4 using xhci_hcd
[ 1.990110] usb 2-5: No LPM exit latency info found. Power management will be impacted.
[ 1.991254] usb 2-5: New USB device found, idVendor=04f3, idProduct=0254
[ 1.991257] usb 2-5: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ 1.991259] usb 2-5: Product: Touchscreen
[ 1.991261] usb 2-5: Manufacturer: ELAN
[ 1.991348] usb 2-5: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.992210] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro
[ 2.157784] usb 2-6: new high-speed USB device number 5 using xhci_hcd
[ 2.212389] usb 2-6: New USB device found, idVendor=0bda, idProduct=5720
[ 2.212395] usb 2-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.212399] usb 2-6: Product: Integrated Camera
[ 2.212402] usb 2-6: Manufacturer: CIXDA779X
[ 2.212405] usb 2-6: SerialNumber: 200901010001
[ 2.287024] usb 3-3.1: new SuperSpeed USB device number 3 using xhci_hcd
[ 2.308863] usb 3-3.1: New USB device found, idVendor=17ef, idProduct=304b
[ 2.308866] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.308869] usb 3-3.1: Product: ThinkPad OneLink GigaLAN
[ 2.308871] usb 3-3.1: Manufacturer: ASIX Elec. Corp.
[ 2.308872] usb 3-3.1: SerialNumber: 000050B665392C
[ 2.382059] usb 1-1.7: new full-speed USB device number 3 using ehci-pci
[ 2.476656] usb 1-1.7: New USB device found, idVendor=0483, idProduct=91d1
[ 2.476660] usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.476662] usb 1-1.7: Product: ST_SENSOR_HUB
[ 2.476664] usb 1-1.7: Manufacturer: STMicroelectronics
[ 2.476666] usb 1-1.7: SerialNumber: ST_SENSOR_HUB
[ 2.546229] usb 1-1.8: new full-speed USB device number 4 using ehci-pci
[ 2.634373] Switched to clocksource tsc
[ 2.640413] usb 1-1.8: New USB device found, idVendor=056a, idProduct=00ec
[ 2.640418] usb 1-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.640420] usb 1-1.8: Product: ISD-V4
[ 2.640422] usb 1-1.8: Manufacturer: Tablet
[ 2.716070] systemd-udevd[378]: starting version 204
[ 2.718747] FS-Cache: Loaded
[ 2.722335] usb 2-3.2: new high-speed USB device number 6 using xhci_hcd
[ 2.725506] RPC: Registered named UNIX socket transport module.
[ 2.725509] RPC: Registered udp transport module.
[ 2.725510] RPC: Registered tcp transport module.
[ 2.725511] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.733508] FS-Cache: Netfs 'nfs' registered for caching
[ 2.738465] usb 2-3.2: New USB device found, idVendor=1a40, idProduct=0101
[ 2.738470] usb 2-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.738472] usb 2-3.2: Product: USB 2.0 Hub [MTT]
[ 2.739194] hub 2-3.2:1.0: USB hub found
[ 2.739252] hub 2-3.2:1.0: 4 ports detected
[ 2.746544] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 2.748814] lp: driver loaded but no devices found
[ 2.781457] Non-volatile memory driver v1.3
[ 2.785223] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 2.785226] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 2.785228] thinkpad_acpi: ThinkPad BIOS GQET28WW (1.08 ), EC unknown
[ 2.785230] thinkpad_acpi: Lenovo ThinkPad S1 Yoga, model 20CD0038GE
[ 2.786248] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 2.786389] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 2.786392] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 2.789034] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 2.790612] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 2.790986] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 2.792515] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input4
[ 2.846087] Bluetooth: Core ver 2.16
[ 2.846103] NET: Registered protocol family 31
[ 2.846105] Bluetooth: HCI device and connection manager initialized
[ 2.846112] Bluetooth: HCI socket layer initialized
[ 2.846114] Bluetooth: L2CAP socket layer initialized
[ 2.846118] Bluetooth: SCO socket layer initialized
[ 2.851940] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.851944] Bluetooth: BNEP filters: protocol multicast
[ 2.851951] Bluetooth: BNEP socket layer initialized
[ 2.862904] Bluetooth: RFCOMM TTY layer initialized
[ 2.862917] Bluetooth: RFCOMM socket layer initialized
[ 2.862918] Bluetooth: RFCOMM ver 1.11
[ 2.879350] wmi: Mapper loaded
[ 2.893167] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[ 2.893174] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.893178] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20130517/utaddress-251)
[ 2.893182] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20130517/utaddress-251)
[ 2.893185] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.893187] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20130517/utaddress-251)
[ 2.893190] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20130517/utaddress-251)
[ 2.893193] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 3 (20130517/utaddress-251)
[ 2.893197] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.893198] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.896662] mei_me 0000:00:16.0: setting latency timer to 64
[ 2.896697] mei_me 0000:00:16.0: irq 59 for MSI/MSI-X
[ 2.898129] [drm] Initialized drm 1.1.0 20060810
[ 2.911035] cfg80211: Calling CRDA to update world regulatory domain
[ 2.921672] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 2.921675] Copyright(c) 2003-2013 Intel Corporation
[ 2.921861] iwlwifi 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.921961] iwlwifi 0000:04:00.0: irq 60 for MSI/MSI-X
[ 2.927421] iwlwifi 0000:04:00.0: loaded firmware version 22.0.7.0 op_mode iwlmvm
[ 2.946000] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[ 2.946078] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
[ 2.946227] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
[ 2.951732] [drm] Memory usable by graphics device = 2048M
[ 2.951737] checking generic (e0000000 130000) vs hw (e0000000 10000000)
[ 2.951739] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 2.951765] Console: switching to colour dummy device 80x25
[ 2.955202] i915 0000:00:02.0: setting latency timer to 64
[ 2.974649] init: avahi-cups-reload main process (543) terminated with status 1
[ 2.977326] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x15
[ 2.985585] i915 0000:00:02.0: irq 61 for MSI/MSI-X
[ 2.985594] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.985596] [drm] Driver supports precise vblank timestamp query.
[ 2.985656] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.986009] ppdev: user-space parallel port driver
[ 3.010560] usb 2-3.2.1: new full-speed USB device number 7 using xhci_hcd
[ 3.018504] type=1400 audit(1390767368.775:2): apparmor="STATUS" operation="profile_load" parent=563 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=602 comm="apparmor_parser"
[ 3.018511] type=1400 audit(1390767368.775:3): apparmor="STATUS" operation="profile_load" parent=563 profile="unconfined" name="/usr/sbin/cupsd" pid=602 comm="apparmor_parser"
[ 3.019630] type=1400 audit(1390767368.775:4): apparmor="STATUS" operation="profile_replace" parent=563 profile="unconfined" name="/usr/sbin/cupsd" pid=602 comm="apparmor_parser"
[ 3.033086] usb 2-3.2.1: config 1 interface 1 altsetting 1 has 2 endpoint descriptors, different from the interface descriptor's value: 1
[ 3.035589] usb 2-3.2.1: New USB device found, idVendor=17ef, idProduct=3049
[ 3.035593] usb 2-3.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.035596] usb 2-3.2.1: Product: ThinkPad OneLink Dock USB Audio
[ 3.035598] usb 2-3.2.1: Manufacturer: C-Media Electronics Inc.
[ 3.051099] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.065387] usbcore: registered new interface driver usbhid
[ 3.065391] usbhid: USB HID core driver
[ 3.073483] input: Wacom ISDv4 EC Pen as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8:1.0/input/input5
[ 3.073670] usbcore: registered new interface driver wacom
[ 3.079822] usbcore: registered new interface driver btusb
[ 3.091100] Linux video capture interface: v2.00
[ 3.092346] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 3.092899] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 3.098413] uvcvideo: Found UVC 1.00 device Integrated Camera (0bda:5720)
[ 3.104497] input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input6
[ 3.111402] usbcore: registered new interface driver uvcvideo
[ 3.111405] USB Video Class driver (1.1.1)
[ 3.148194] type=1400 audit(1390767368.903:5): apparmor="STATUS" operation="profile_load" parent=717 profile="unconfined" name="/sbin/dhclient" pid=719 comm="apparmor_parser"
[ 3.148201] type=1400 audit(1390767368.903:6): apparmor="STATUS" operation="profile_load" parent=717 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=719 comm="apparmor_parser"
[ 3.148206] type=1400 audit(1390767368.903:7): apparmor="STATUS" operation="profile_load" parent=717 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=719 comm="apparmor_parser"
[ 3.148755] type=1400 audit(1390767368.903:8): apparmor="STATUS" operation="profile_replace" parent=717 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=719 comm="apparmor_parser"
[ 3.148762] type=1400 audit(1390767368.903:9): apparmor="STATUS" operation="profile_replace" parent=717 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=719 comm="apparmor_parser"
[ 3.149059] type=1400 audit(1390767368.903:10): apparmor="STATUS" operation="profile_replace" parent=717 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=719 comm="apparmor_parser"
[ 3.161349] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x15
[ 3.177415] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input7
[ 3.179259] cfg80211: World regulatory domain updated:
[ 3.179262] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3.179264] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3.179265] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3.179267] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3.179269] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3.179271] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3.179445] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 3.180592] hid-multitouch 0003:04F3:0254.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-5/input0
[ 3.188452] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x15
[ 3.193622] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 3.199739] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x15
[ 3.213481] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.260271] input: C-Media Electronics Inc. ThinkPad OneLink Dock USB Audio as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.3/input/input8
[ 3.260388] hid-generic 0003:17EF:3049.0003: input,hidraw1: USB HID v1.00 Device [C-Media Electronics Inc. ThinkPad OneLink Dock USB Audio] on usb-0000:00:14.0-3.2.1/input3
[ 3.328388] init: failsafe main process (763) killed by TERM signal
[ 3.342398] usbcore: registered new interface driver snd-usb-audio
[ 3.365497] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
[ 3.494853] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[ 3.512519] fbcon: inteldrmfb (fb0) is primary device
[ 3.551870] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
[ 3.552017] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
[ 3.560668] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3.560861] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3.752937] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x127c00, board id: 2911, fw id: 1514409
[ 3.752941] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 3.811255] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 4.864073] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 5.348427] Console: switching to colour frame buffer device 240x67
[ 5.355988] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 5.355989] i915 0000:00:02.0: registered panic notifier
[ 5.469113] acpi device:4d: registered as cooling_device4
[ 5.469158] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 5.469207] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 5.470787] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 5.471001] snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X
[ 5.472676] HDA driver get symbol successfully from i915 module
[ 5.472706] snd_hda_intel 0000:00:03.0: irq 63 for MSI/MSI-X
[ 5.480992] hda_codec: invalid CONNECT_LIST verb 6[1]:0
[ 5.481047] hda_codec: invalid CONNECT_LIST verb 7[1]:0
[ 5.484536] HDMI: Unknown ELD version 0
[ 5.484676] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 5.484848] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 5.484937] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 5.488911] hda_codec: CX20751/2: BIOS auto-probing.
[ 5.489129] autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 5.489131] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.489133] hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 5.489134] mono: mono_out=0x0
[ 5.489135] inputs:
[ 5.489137] Internal Mic=0x1a
[ 5.489139] Mic=0x19
[ 5.490004] hda_codec: Enable sync_write for stable communication
[ 5.492854] HDMI: Unknown ELD version 0
[ 5.494628] HDMI: Unknown ELD version 0
[ 5.497577] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card2/input14
[ 5.497762] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input15
[ 5.615338] init: plymouth-splash main process (1302) terminated with status 1
[ 5.634114] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 5.637908] vboxdrv: Found 4 processor cores.
[ 5.639336] vboxdrv: fAsync=0 offMin=0x369 offMax=0xe91
[ 5.639779] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 5.639781] vboxdrv: Successfully loaded version 4.3.4 (interface 0x001a0005).
[ 5.794477] HDMI: Unknown ELD version 0
[ 5.852937] vboxpci: IOMMU not found (not registered)
[ 6.094692] HDMI: Unknown ELD version 0
[ 6.394936] HDMI: Unknown ELD version 0
[ 6.695177] HDMI: Unknown ELD version 0
[ 6.995627] HDMI: Unknown ELD version 0
[ 7.106708] init: plymouth-stop pre-start process (1947) terminated with status 1
[ 7.295649] HDMI: Unknown ELD version 0
[ 7.595901] HDMI: Unknown ELD version 0
[ 7.896172] HDMI: Unknown ELD version 0
[ 8.204603] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 10.103988] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 10.419127] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input16
[ 10.918017] wlan0: authenticate with bc:05:43:7f:fd:0e
[ 10.919047] wlan0: send auth to bc:xxxxxx (try 1/3)
[ 10.920615] wlan0: authenticated
[ 10.920786] wlan0: associate with xxxxxx (try 1/3)
[ 10.937575] wlan0: RX AssocResp from xxxxxxx (capab=0x511 status=0 aid=1)
[ 10.938502] wlan0: associated
[ 10.938523] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 10.938578] cfg80211: Calling CRDA for country: DE
[ 10.941055] cfg80211: Regulatory domain changed to country: DE
[ 10.941058] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.941061] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 10.941062] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 10.941064] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 10.941065] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[ 10.941067] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 10.976306] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by xxxxxx
[ 63.532893] ASIX USB Ethernet Adapter:v1.9.0 11:14:06 Jan 18 2014
[ 63.532893] http://www.asix.com.tw
Modul für LAN USB3 (Asix; manuell geladen, da in Blacklist):
[ 63.532900] ax88179_178a 3-3.1:1.0 (unregistered net_device): mtu 1500
[ 63.533078] ax88179_178a 3-3.1:1.0 eth0: register 'ax88179_178a' at usb-0000:00:14.0-3.1, ThinkPad OneLinkDock USB GigaLAN, xxxxxx
[ 63.534194] usbcore: registered new interface driver ax88179_178a
[ 63.856187] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 63.856542] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 66.924951] ax88179_178a 3-3.1:1.0 eth0: ax88179_178a - Link status is: 1
[ 66.924982] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 66.927622] ax88179_178a 3-3.1:1.0 eth0: Write medium type: 0x013b
[ 66.932009] ax88179_178a 3-3.1:1.0 eth0: link up, 1000Mbps, full-duplex, lpa 0xCDE1
Stecker abgezogen:
[ 140.279366] usb 2-3: USB disconnect, device number 2
[ 140.279376] usb 2-3.2: USB disconnect, device number 6
[ 140.279381] usb 2-3.2.1: USB disconnect, device number 7
[ 140.444476] usb 3-3: USB disconnect, device number 2
[ 140.444481] usb 3-3.1: USB disconnect, device number 3
[ 140.444561] usb 3-3.1: Failed to set U1 timeout to 0x0,error code -19
[ 140.444565] usb 3-3.1: Set SEL for device-initiated U1 failed.
[ 140.444569] usb 3-3.1: Set SEL for device-initiated U2 failed.
[ 140.444709] ax88179_178a 3-3.1:1.0 eth0: unregister 'ax88179_178a' usb-0000:00:14.0-3.1, ThinkPad OneLinkDock USB GigaLAN
[ 140.444725] ax88179_178a 3-3.1:1.0 eth0: Failed to read reg index 0x0002: -19
[ 140.444730] ax88179_178a 3-3.1:1.0 eth0: Failed to write reg index 0x0002: -19
[ 140.476528] ax88179_178a 3-3.1:1.0 (unregistered net_device): Failed to write reg index 0x0002: -19
[ 140.476533] ax88179_178a 3-3.1:1.0 (unregistered net_device): Failed to write reg index 0x0001: -19
[ 140.476537] ax88179_178a 3-3.1:1.0 (unregistered net_device): Failed to write reg index 0x0002: -19
[ 140.518027] init: anacron main process (1120) killed by TERM signal
[ 140.680563] usb 3-3.1: Failed to set U1 timeout to 0x0,error code -19
[ 140.680566] usb 3-3.1: Set SEL for device-initiated U1 failed.
[ 140.680568] usb 3-3.1: Set SEL for device-initiated U2 failed.
[ 140.681587] usb 3-3: Set SEL for device-initiated U1 failed.
[ 140.681591] usb 3-3: Set SEL for device-initiated U2 failed.
Stecker wieder rein:
[ 223.477097] usb 2-3: new high-speed USB device number 8 using xhci_hcd
[ 223.495034] usb 2-3: New USB device found, idVendor=2109, idProduct=2812
[ 223.495044] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 223.495048] usb 2-3: Product: EDGE DOCK
[ 223.495052] usb 2-3: Manufacturer: LENOVO
[ 223.495648] hub 2-3:1.0: USB hub found
[ 223.495986] hub 2-3:1.0: 4 ports detected
[ 223.613287] usb 3-3: new SuperSpeed USB device number 4 using xhci_hcd
[ 223.861971] usb 3-3: New USB device found, idVendor=2109, idProduct=0812
[ 223.861983] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 223.861990] usb 3-3: Product: EDGE DOCK
[ 223.861997] usb 3-3: Manufacturer: LENOVO
[ 223.863996] hub 3-3:1.0: USB hub found
[ 223.864121] hub 3-3:1.0: 4 ports detected
[ 223.949336] usb 2-3.2: new high-speed USB device number 9 using xhci_hcd
[ 223.965371] usb 2-3.2: New USB device found, idVendor=1a40, idProduct=0101
[ 223.965380] usb 2-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 223.965387] usb 2-3.2: Product: USB 2.0 Hub [MTT]
[ 223.966010] hub 2-3.2:1.0: USB hub found
[ 223.966058] hub 2-3.2:1.0: 4 ports detected
[ 224.238249] usb 3-3.1: new SuperSpeed USB device number 5 using xhci_hcd
[ 224.260119] usb 3-3.1: New USB device found, idVendor=17ef, idProduct=304b
[ 224.260128] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 224.260133] usb 3-3.1: Product: ThinkPad OneLink GigaLAN
[ 224.260137] usb 3-3.1: Manufacturer: ASIX Elec. Corp.
[ 224.260140] usb 3-3.1: SerialNumber: xxxxx
[ 224.584374] ASIX USB Ethernet Adapter:v1.9.0 11:14:06 Jan 18 2014
[ 224.584374] http://www.asix.com.tw
[ 224.584389] ax88179_178a 3-3.1:1.0 (unregistered net_device): mtu 1500
[ 224.584767] ax88179_178a 3-3.1:1.0 eth0: register 'ax88179_178a' at usb-0000:00:14.0-3.1, ThinkPad OneLinkDock USB GigaLAN, xxxxxxx
[ 224.940114] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 224.940802] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 226.934190] usb 2-3.2.1: new full-speed USB device number 10 using xhci_hcd
[ 226.957031] usb 2-3.2.1: config 1 interface 1 altsetting 1 has 2 endpoint descriptors, different from the interface descriptor's value: 1
[ 226.959703] usb 2-3.2.1: New USB device found, idVendor=17ef, idProduct=3049
[ 226.959713] usb 2-3.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 226.959718] usb 2-3.2.1: Product: ThinkPad OneLink Dock USB Audio
[ 226.959723] usb 2-3.2.1: Manufacturer: C-Media Electronics Inc.
[ 226.983553] input: C-Media Electronics Inc. ThinkPad OneLink Dock USB Audio as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.3/input/input17
[ 226.983790] hid-generic 0003:17EF:3049.0004: input,hidraw1: USB HID v1.00 Device [C-Media Electronics Inc. ThinkPad OneLink Dock USB Audio] on usb-0000:00:14.0-3.2.1/input3
[ 227.951025] ax88179_178a 3-3.1:1.0 eth0: ax88179_178a - Link status is: 1
[ 227.951081] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 227.953720] ax88179_178a 3-3.1:1.0 eth0: Write medium type: 0x013b
[ 227.960422] ax88179_178a 3-3.1:1.0 eth0: link up, 1000Mbps, full-duplex, lpa 0xCDE1
[ 303.842886] usb 2-1: new low-speed USB device number 11 using xhci_hcd
[ 303.864428] usb 2-1: New USB device found, idVendor=046d, idProduct=c00e
[ 303.864440] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 303.864445] usb 2-1: Product: USB-PS/2 Optical Mouse
[ 303.864449] usb 2-1: Manufacturer: Logitech
[ 303.864736] usb 2-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 303.868443] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/input/input18
[ 303.868789] hid-generic 0003:046D:C00E.0005: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-1/input0
Stecker wieder raus:
[ 390.035175] usb 2-3: USB disconnect, device number 8
[ 390.035184] usb 2-3.2: USB disconnect, device number 9
[ 390.035189] usb 2-3.2.1: USB disconnect, device number 10
[ 390.230466] usb 3-3: USB disconnect, device number 4
[ 390.230485] usb 3-3.1: USB disconnect, device number 5
[ 390.230617] usb 3-3.1: Failed to set U1 timeout to 0x0,error code -19
[ 390.230624] usb 3-3.1: Set SEL for device-initiated U1 failed.
[ 390.230629] usb 3-3.1: Set SEL for device-initiated U2 failed.
[ 390.230846] ax88179_178a 3-3.1:1.0 eth0: unregister 'ax88179_178a' usb-0000:00:14.0-3.1, ThinkPad OneLinkDock USB GigaLAN
[ 390.230873] ax88179_178a 3-3.1:1.0 eth0: Failed to read reg index 0x0002: -19
[ 390.230881] ax88179_178a 3-3.1:1.0 eth0: Failed to write reg index 0x0002: -19
[ 390.266356] ax88179_178a 3-3.1:1.0 (unregistered net_device): Failed to write reg index 0x0002: -19
[ 390.266359] ax88179_178a 3-3.1:1.0 (unregistered net_device): Failed to write reg index 0x0001: -19
[ 390.266361] ax88179_178a 3-3.1:1.0 (unregistered net_device): Failed to write reg index 0x0002: -19
[ 390.470555] usb 3-3.1: Failed to set U1 timeout to 0x0,error code -19
[ 390.470565] usb 3-3.1: Set SEL for device-initiated U1 failed.
[ 390.470570] usb 3-3.1: Set SEL for device-initiated U2 failed.
[ 390.471159] usb 3-3: Set SEL for device-initiated U1 failed.
[ 390.471164] usb 3-3: Set SEL for device-initiated U2 failed.
[ 390.719690] init: anacron main process (6626) killed by TERM signal