hypnotizesic
Anmeldungsdatum: 13. Januar 2010
Beiträge: 38
|
Hallo liebe Community ich habe folgendes Problem ! Ich habe über dieses //wiki.ubuntuusers.de/vsftpd: Tut den vsftpd Ftp Server eingerichtet, ich komme in FileZilla bis zur password Abfrage Status: Verbinde mit 127.0.0.1:21...
Status: Verbindung hergestellt, warte auf Willkommensnachricht...
Antwort: 220 (vsFTPd 2.2.0)
Befehl: USER phillipp
Antwort: 331 Please specify the password.
Befehl: PASS ******
Antwort: 530 Login incorrect.
den User habe ich wie folgt angelegt useradd -d /home/phillipp -c "FTP-User" -s /bin/false phillipp
habe auch den Ftp-Server mit start|stop|restart nach jeder Änderung durchgeführt.(natürlich auch am schluss ☺)
Das Verzeichnis /home sowie /home/phillipp habe ich jetzt schon auf chmod 777 gemacht weiß ich dachte es liegt daran aber auch nicht !! Hier einmal meine vsftpd.conf #### CONFIXX VSFTPD KONFIGURATIONSDATEI ####
anonymous_enable=NO
local_enable=YES
write_enable=YES
local_umask=022
xferlog_enable=NO
xferlog_file=/var/log/xferlog
xferlog_std_format=YES
ascii_upload_enable=YES
ascii_download_enable=YES
ls_recurse_enable=YES
pasv_promiscuous=YES
connect_from_port_20=YES
chroot_local_user=YES
userlist_enable=YES
userlist_file=/etc/vsftpd.user_list
userlist_deny=NO
pam_service_name=vsftpd
#
# The following directive shows allways dot-files.
# vsftpd of version less than 1.1.3 does not support feature 'force_dot_files'.
# If your vsftpd has this feature then
# remove commenting mark ('#') to activate the directive below.
#
#force_dot_files=YES
listen=YES
### ENDE ####
Bitte um Hilfe Vielen dank im vorraus
PS: ach ja ich habe leider nicht so viel linux erfahrung, dachte ich sag es mal dazu !!!
|
schnux
Anmeldungsdatum: 22. März 2009
Beiträge: 538
Wohnort: Dresden
|
Moin, bist du zufälligerweise irgendeinem Tutorial im Netz gefolgt, und hast irgendetwas ausgelassen?
Dass da oben "Confixx" steht, macht mir Angst 😉 pam_service_name=vsftpd
deutet eher darauf hin, dass vsftpd sich nicht gegen standard PAM authentifizieren will, sondern eine eigene PAM, die du in /etc/pam.d angelegt haben solltest (wenn dem so ist wie ich vermute) Gib mal die Ausgabe von
tail /var/log/vsftpd.log
|
hypnotizesic
(Themenstarter)
Anmeldungsdatum: 13. Januar 2010
Beiträge: 38
|
Hi auch guten Morgen die .log sagt das hier Tue Jan 12 14:35:37 2010 [pid 2] CONNECT: Client "127.0.0.1"
Tue Jan 12 14:35:37 2010 [pid 1] [ftp] OK LOGIN: Client "127.0.0.1", anon password "anon@localhost"
Tue Jan 12 14:35:52 2010 [pid 2] CONNECT: Client "127.0.0.1"
Tue Jan 12 14:35:52 2010 [pid 1] [ftp] OK LOGIN: Client "127.0.0.1", anon password "anon@localhost"
Tue Jan 12 14:36:00 2010 [pid 2] CONNECT: Client "127.0.0.1"
Tue Jan 12 14:36:00 2010 [pid 1] [ftp] OK LOGIN: Client "127.0.0.1", anon password "anon@localhost"
Tue Jan 12 14:36:05 2010 [pid 2] CONNECT: Client "127.0.0.1"
Tue Jan 12 14:36:05 2010 [pid 1] [ftp] OK LOGIN: Client "127.0.0.1", anon password "anon@localhost"
Tue Jan 12 14:45:44 2010 [pid 2] CONNECT: Client "127.0.0.1"
Tue Jan 12 14:45:44 2010 [pid 1] [ftp] OK LOGIN: Client "127.0.0.1", anon password "anon@localhost"
Tue Jan 12 14:46:06 2010 [pid 2] CONNECT: Client "127.0.0.1"
Tue Jan 12 14:46:06 2010 [pid 1] [ftp] OK LOGIN: Client "127.0.0.1", anon password "anon@localhost"
Tue Jan 12 16:15:25 2010 [pid 2] CONNECT: Client "127.0.0.1"
Tue Jan 12 16:15:31 2010 [pid 2] CONNECT: Client "127.0.0.1"
Tue Jan 12 16:15:41 2010 [pid 2] CONNECT: Client "127.0.0.1"
Tue Jan 12 16:15:41 2010 [pid 1] [ftp] OK LOGIN: Client "127.0.0.1", anon password "anon@localhost"
Tue Jan 12 16:15:57 2010 [pid 2] CONNECT: Client "127.0.0.1"
Tue Jan 12 16:15:57 2010 [pid 1] [ftp] OK LOGIN: Client "127.0.0.1", anon password "anon@localhost"
Tue Jan 12 16:53:44 2010 [pid 2] CONNECT: Client "127.0.0.1"
Tue Jan 12 16:53:50 2010 [pid 2] CONNECT: Client "127.0.0.1"
Tue Jan 12 18:28:59 2010 [pid 2] CONNECT: Client "127.0.0.1"
Tue Jan 12 18:29:04 2010 [pid 2] CONNECT: Client "127.0.0.1"
Tue Jan 12 18:29:31 2010 [pid 2] CONNECT: Client "127.0.0.1"
Tue Jan 12 18:29:31 2010 [pid 1] [ftp] OK LOGIN: Client "127.0.0.1", anon password "anon@localhost"
Tue Jan 12 18:29:39 2010 [pid 2] CONNECT: Client "127.0.0.1"
Tue Jan 12 18:29:39 2010 [pid 1] [ftp] OK LOGIN: Client "127.0.0.1", anon password "anon@localhost"
Tue Jan 12 18:31:17 2010 [pid 2] CONNECT: Client "127.0.0.1"
Tue Jan 12 18:32:11 2010 [pid 2] CONNECT: Client "127.0.0.1"
Tue Jan 12 18:32:16 2010 [pid 2] CONNECT: Client "127.0.0.1"
Tue Jan 12 18:33:20 2010 [pid 2] CONNECT: Client "127.0.0.1"
Tue Jan 12 18:35:54 2010 [pid 2] CONNECT: Client "127.0.0.1"
Wed Jan 13 19:16:39 2010 [pid 2] CONNECT: Client "127.0.0.1"
Wed Jan 13 19:16:45 2010 [pid 2] CONNECT: Client "127.0.0.1"
Wed Jan 13 19:20:00 2010 [pid 2] CONNECT: Client "127.0.0.1"
Wed Jan 13 19:20:06 2010 [pid 2] CONNECT: Client "127.0.0.1"
Wed Jan 13 19:22:43 2010 [pid 2] CONNECT: Client "127.0.0.1"
Wed Jan 13 19:26:44 2010 [pid 2] CONNECT: Client "127.0.0.1"
Wed Jan 13 19:46:21 2010 [pid 2] CONNECT: Client "127.0.0.1"
Wed Jan 13 19:46:27 2010 [pid 2] CONNECT: Client "127.0.0.1" Und ja die Datei in /etc/pam.d is da warum weiß ich nicht !
Ich gebe dir auch mal den ihnhalt von der /etc/pam.d/vsftpd :
# Standard behaviour for ftpd(8).
auth required pam_listfile.so item=user sense=deny file=/etc/ftpusers onerr=succeed
# Note: vsftpd handles anonymous logins on its own. Do not enable pam_ftp.so.
# Standard pam includes
@include common-account
@include common-session
@include common-auth
auth required pam_shells.so
Ich Frage mich was pam_shells.so für eine Datei ist? Ich kann sie auf jeden Fall nicht öffnen !
|
schnux
Anmeldungsdatum: 22. März 2009
Beiträge: 538
Wohnort: Dresden
|
Hi, öhm .... In der vsftpd.log steht nicht ansatzweise das, was ich erwartet hätte.
Kannst du mal die komplette posten? (auch wenns etwas länger wird)
cat /var/log/vsftpd.log Und dann ... willst du, dass sich vsftpd gegen das unix-pam authentifiziert?
Dann ist die /etc/pam.d/vsftpd korrekt.
pam_shells.so ist die library, die die Authentifizierung mit den Systemusern handelt.
pam_service_name=vsftpd ist somit auch korrekt. Steht in /var/log/auth.log was problematisches drin? Ich test grad mal mit einer kleinen frischen vsftpd install
|
hypnotizesic
(Themenstarter)
Anmeldungsdatum: 13. Januar 2010
Beiträge: 38
|
So ich habe jetzt auch nochmal meine vsftpd.conf ein wenig verändert : #### CONFIXX VSFTPD KONFIGURATIONSDATEI ####
anonymous_enable=YES
local_enable=YES
write_enable=YES
local_umask=777 # Auf 022 Stand es vorher
dirmessage_enable=YES
ftpd_banner="Herzlich Willkommen"
ls_recurse_enable=YES
hide_ids=YES
ssl_enable=NO
xferlog_enable=NO
xferlog_file=/var/log/xferlog
xferlog_std_format=YES
anon_root=/home/ftp/upload
anon_upload_enable=YES
anon_mkdir_write_enable=YES
anon_other_write_enable=YES
no_anon_password=yes
ftp_data_port=20
listen_port=21
ascii_upload_enable=YES
ascii_download_enable=YES
ls_recurse_enable=YES
pasv_promiscuous=YES
connect_from_port_20=YES
pasv_promiscuous=YES
ascii_upload_enable=YES
ascii_download_enable=YES
chroot_local_user=YES
userlist_enable=YES
userlist_file=/etc/vsftpd.user_list
userlist_deny=NO
syslog_enable=YES
pam_service_name=vsftpd
#
# The following directive shows allways dot-files.
# vsftpd of version less than 1.1.3 does not support feature 'force_dot_files'.
# If your vsftpd has this feature then
# remove commenting mark ('#') to activate the directive below.
#
#force_dot_files=YES
listen=YES
### ENDE ####
habe jetzt auch die anonymous user zugelassen aber es kommt immer noch das selbe, auzug aus FileZilla : Status: Verbinde mit 127.0.0.1:21...
Status: Verbindung hergestellt, warte auf Willkommensnachricht...
Antwort: 220 "Herzlich Willkommen"
Befehl: USER anonymous
Antwort: 530 Permission denied.
Fehler: Herstellen der Verbindung zum Server fehlgeschlagen
habe auch schon versucht nicht localhost einzugeben wie man sehen kann sondern auch die ip !
den eintrag anon_root=/home/ftp/upload
aus der.conf Datei, der ftp und der upload ordner haben schon chmod 777
|
hypnotizesic
(Themenstarter)
Anmeldungsdatum: 13. Januar 2010
Beiträge: 38
|
Das is die auth.log also jetzt nicht alles ^^ : Jan 14 07:55:11 Strobel sshd[1291]: Server listening on 0.0.0.0 port 22.
Jan 14 07:55:11 Strobel sshd[1291]: Server listening on :: port 22.
Jan 14 07:55:12 Strobel sshd[1291]: Received signal 15; terminating.
Jan 14 07:55:12 Strobel sshd[1428]: Server listening on 0.0.0.0 port 22.
Jan 14 07:55:12 Strobel sshd[1428]: Server listening on :: port 22.
Jan 14 07:55:40 Strobel gdm-session-worker[1974]: pam_unix(gdm:auth): /etc/securetty is either world writable or not a normal file
Jan 14 07:55:43 Strobel gdm-session-worker[1974]: pam_unix(gdm:auth): /etc/securetty is either world writable or not a normal file
Jan 14 07:55:44 Strobel gdm-session-worker[1974]: pam_unix(gdm:session): session opened for user root by (uid=0)
Jan 14 07:55:44 Strobel gdm-session-worker[1974]: pam_ck_connector(gdm:session): nox11 mode, ignoring PAM_TTY :0
Jan 14 07:55:47 Strobel seahorse-daemon[2092]: init gpgme version 1.1.8
Jan 14 08:00:12 Strobel sudo: cannot execute /usr/sbin/sendmail: No such file or directory
Jan 14 08:00:12 Strobel sudo: root : /etc/sudoers is mode 0666, should be 0440 ; TTY=unknown ; PWD=/ ; COMMAND=gconftool
Jan 14 08:00:12 Strobel sudo: cannot execute /usr/sbin/sendmail: No such file or directory
Jan 14 08:00:12 Strobel sudo: root : /etc/sudoers is mode 0666, should be 0440 ; TTY=unknown ; PWD=/ ; COMMAND=gconftool
Jan 14 08:00:12 Strobel sudo: cannot execute /usr/sbin/sendmail: No such file or directory
Jan 14 08:00:12 Strobel sudo: root : /etc/sudoers is mode 0666, should be 0440 ; TTY=unknown ; PWD=/ ; COMMAND=gconftool
Jan 14 08:01:51 Strobel vsftpd: pam_listfile(vsftpd:auth): /etc/ftpusers is either world writable or not a normal file
Jan 14 08:01:51 Strobel vsftpd: pam_unix(vsftpd:auth): /etc/securetty is either world writable or not a normal file
Jan 14 08:01:51 Strobel vsftpd: pam_unix(vsftpd:auth): /etc/securetty is either world writable or not a normal file
Jan 14 08:01:51 Strobel vsftpd: pam_unix(vsftpd:auth): authentication failure; logname= uid=0 euid=0 tty=ftp ruser=phillipp rhost=127.0.0.1 user=phillipp
Jan 14 08:04:44 Strobel vsftpd: pam_listfile(vsftpd:auth): /etc/ftpusers is either world writable or not a normal file
Jan 14 08:04:44 Strobel vsftpd: pam_unix(vsftpd:auth): /etc/securetty is either world writable or not a normal file
Jan 14 08:04:44 Strobel vsftpd: pam_unix(vsftpd:auth): /etc/securetty is either world writable or not a normal file
Jan 14 08:04:44 Strobel vsftpd: pam_unix(vsftpd:auth): authentication failure; logname= uid=0 euid=0 tty=ftp ruser=phillipp rhost=127.0.0.1 user=phillipp
Jan 14 08:05:00 Strobel vsftpd: pam_listfile(vsftpd:auth): /etc/ftpusers is either world writable or not a normal file
Jan 14 08:05:00 Strobel vsftpd: pam_unix(vsftpd:auth): /etc/securetty is either world writable or not a normal file
Jan 14 08:05:00 Strobel vsftpd: pam_unix(vsftpd:auth): /etc/securetty is either world writable or not a normal file
Jan 14 08:05:00 Strobel vsftpd: pam_unix(vsftpd:auth): authentication failure; logname= uid=0 euid=0 tty=ftp ruser=phillipp rhost=127.0.0.1 user=phillipp
Jan 14 08:09:01 Strobel CRON[4471]: pam_unix(cron:session): session opened for user root by (uid=0)
Jan 14 08:09:01 Strobel CRON[4471]: pam_unix(cron:session): session closed for user root
Jan 14 08:17:01 Strobel CRON[4533]: pam_unix(cron:session): session opened for user root by (uid=0)
Jan 14 08:17:01 Strobel CRON[4533]: pam_unix(cron:session): session closed for user root
Jan 14 08:39:01 Strobel CRON[4603]: pam_unix(cron:session): session opened for user root by (uid=0)
Jan 14 08:39:01 Strobel CRON[4603]: pam_unix(cron:session): session closed for user root
Jan 14 09:03:30 Strobel vsftpd: pam_listfile(vsftpd:auth): /etc/ftpusers is either world writable or not a normal file
Jan 14 09:03:30 Strobel vsftpd: pam_unix(vsftpd:auth): /etc/securetty is either world writable or not a normal file
Jan 14 09:03:30 Strobel vsftpd: pam_unix(vsftpd:auth): /etc/securetty is either world writable or not a normal file
Jan 14 09:03:30 Strobel vsftpd: pam_unix(vsftpd:auth): authentication failure; logname= uid=0 euid=0 tty=ftp ruser=phillipp rhost=127.0.0.1 user=phillipp
Jan 14 09:04:53 Strobel vsftpd: pam_listfile(vsftpd:auth): /etc/ftpusers is either world writable or not a normal file
Jan 14 09:04:53 Strobel vsftpd: pam_unix(vsftpd:auth): /etc/securetty is either world writable or not a normal file
Jan 14 09:04:53 Strobel vsftpd: pam_unix(vsftpd:auth): /etc/securetty is either world writable or not a normal file
Jan 14 09:04:53 Strobel vsftpd: pam_unix(vsftpd:auth): authentication failure; logname= uid=0 euid=0 tty=ftp ruser=phillipp rhost=127.0.0.1 user=phillipp
Jan 14 09:05:02 Strobel vsftpd: pam_listfile(vsftpd:auth): /etc/ftpusers is either world writable or not a normal file
Jan 14 09:05:02 Strobel vsftpd: pam_unix(vsftpd:auth): /etc/securetty is either world writable or not a normal file
Jan 14 09:05:02 Strobel vsftpd: pam_unix(vsftpd:auth): /etc/securetty is either world writable or not a normal file
Jan 14 09:05:02 Strobel vsftpd: pam_unix(vsftpd:auth): authentication failure; logname= uid=0 euid=0 tty=ftp ruser=phillipp rhost=127.0.0.1 user=phillipp
Jan 14 09:09:01 Strobel CRON[4932]: pam_unix(cron:session): session opened for user root by (uid=0)
Jan 14 09:09:01 Strobel CRON[4932]: pam_unix(cron:session): session closed for user root
Jan 14 09:12:28 Strobel useradd[4965]: new group: name=ftp, GID=1005
Jan 14 09:12:28 Strobel useradd[4965]: new user: name=ftp, UID=1004, GID=1005, home=/home/ftp, shell=/bin/sh
Jan 14 09:17:01 Strobel CRON[4988]: pam_unix(cron:session): session opened for user root by (uid=0)
Jan 14 09:17:01 Strobel CRON[4988]: pam_unix(cron:session): session closed for user root
Jan 14 09:21:19 Strobel vsftpd[1]: pam_listfile(vsftpd:auth): /etc/ftpusers is either world writable or not a normal file
Jan 14 09:21:19 Strobel vsftpd[1]: pam_unix(vsftpd:auth): /etc/securetty is either world writable or not a normal file
Jan 14 09:21:19 Strobel vsftpd[1]: pam_unix(vsftpd:auth): /etc/securetty is either world writable or not a normal file
Jan 14 09:21:19 Strobel vsftpd[1]: pam_unix(vsftpd:auth): authentication failure; logname= uid=0 euid=0 tty=ftp ruser=phillipp rhost=127.0.0.1 user=phillipp
Jan 14 09:21:27 Strobel vsftpd[1]: pam_listfile(vsftpd:auth): /etc/ftpusers is either world writable or not a normal file
Jan 14 09:21:27 Strobel vsftpd[1]: pam_unix(vsftpd:auth): /etc/securetty is either world writable or not a normal file
Jan 14 09:21:27 Strobel vsftpd[1]: pam_unix(vsftpd:auth): /etc/securetty is either world writable or not a normal file
Jan 14 09:21:27 Strobel vsftpd[1]: pam_unix(vsftpd:auth): authentication failure; logname= uid=0 euid=0 tty=ftp ruser=phillipp rhost=127.0.0.1 user=phillipp
Jan 14 09:39:01 Strobel CRON[5214]: pam_unix(cron:session): session opened for user root by (uid=0)
Jan 14 09:39:01 Strobel CRON[5214]: pam_unix(cron:session): session closed for user root
so und du wolltest ja die vsftpd.log haben, das war die komplette.
Das hat aber nix damit zu tun das ich als root eingeloggt bin oder ?
|
schnux
Anmeldungsdatum: 22. März 2009
Beiträge: 538
Wohnort: Dresden
|
gib mal die Ausgabe von
ls -al /etc/securetty Er sagt, die Datei ist word-writeable. Es könnte sein dass er deshalb abbricht.
|
schnux
Anmeldungsdatum: 22. März 2009
Beiträge: 538
Wohnort: Dresden
|
Also ich hab meine Installation jetzt so simpel wie möglich gemacht: apt-get install vsftpd
in der /etc/vsftpd.conf geändert:
anonymous_enable=NO
local_enable=YES
write_enable=YES dann einen user angelegt
adduser ftpuser und schon:
# ftp localhost
Connected to localhost.localdomain.
220 (vsFTPd 2.0.6)
Name (localhost:root): ftpuser
331 Please specify the password.
Password:
230 Login successful.
|
hypnotizesic
(Themenstarter)
Anmeldungsdatum: 13. Januar 2010
Beiträge: 38
|
Hier einmal die ausgabe : # /etc/securetty: list of terminals on which root is allowed to login.
# See securetty(5) and login(1).
console
# Standard serial ports
ttyS0
ttyS1
ttyS2
ttyS3
# USB dongles
ttyUSB0
ttyUSB1
ttyUSB2
# PowerMac
ttyPZ0
ttyPZ1
ttyPZ2
ttyPZ3
# Embedded MPC platforms
ttyPSC0
ttyPSC1
ttyPSC2
ttyPSC3
ttyPSC4
ttyPSC5
# PA-RISC mux ports
ttyB0
ttyB1
# Standard hypervisor virtual console
hvc0
# Oldstyle Xen console
xvc0
# Standard consoles
tty1
tty2
tty3
tty4
tty5
tty6
tty7
tty8
tty9
tty10
tty11
tty12
tty13
tty14
tty15
tty16
tty17
tty18
tty19
tty20
tty21
tty22
tty23
tty24
tty25
tty26
tty27
tty28
tty29
tty30
tty31
tty32
tty33
tty34
tty35
tty36
tty37
tty38
tty39
tty40
tty41
tty42
tty43
tty44
tty45
tty46
tty47
tty48
tty49
tty50
tty51
tty52
tty53
tty54
tty55
tty56
tty57
tty58
tty59
tty60
tty61
tty62
tty63
# Local X displays (allows empty passwords with pam_unix's nullok_secure)
:0
:0.0
:0.1
:1
:1.0
:1.1
:2
:2.0
:2.1
:3
:3.0
:3.1
# Embedded Freescale i.MX ports
ttymxc0
ttymxc1
ttymxc2
ttymxc3
ttymxc4
ttymxc5
|
schnux
Anmeldungsdatum: 22. März 2009
Beiträge: 538
Wohnort: Dresden
|
Hi, nicht den Inhalt der Datei, ich wollte die Rechte sehen 😉 ls -al /etc/securetty Probier mal oben beschriebene Variante. Und User leg ich eigentlich immer mit
adduser
an. useradd is a low level utility for adding users. On Debian, administrators should usually use adduser(8) instead.
|
hypnotizesic
(Themenstarter)
Anmeldungsdatum: 13. Januar 2010
Beiträge: 38
|
Achso ^^ hier bitte -rw-rw-rw- 1 root root 1018 2009-07-31 15:55 /etc/securetty
|
hypnotizesic
(Themenstarter)
Anmeldungsdatum: 13. Januar 2010
Beiträge: 38
|
Es kommt immer noch der gleiche Fehler auch wenn ich ein user mit adduser anlege !
So ein scheiß ^^ bin am verzweifeln 😢
|
schnux
Anmeldungsdatum: 22. März 2009
Beiträge: 538
Wohnort: Dresden
|
Bitte ändere erstmal die Rechte der Datei /etc/securetty auf
-rw-r--r-- also chmod 644 /etc/securetty ☺ Und wenns garnix bringt, dann versuch doch einfach mal die komplette Neuinstallation von vsftpd, also
purge remove, reinstall, conf anpasen, adduser. dann sollte es schon klappen
|
hypnotizesic
(Themenstarter)
Anmeldungsdatum: 13. Januar 2010
Beiträge: 38
|
Aha... vielleicht liegt es daran das vsftpd fehlerhaft ist es lässt sich nicht desinstall es kommt folgender fehler : Codeinstalliert.)
Entferne vsftpd ...
* Stopping FTP server: vsftpd
...done.
dpkg: Fehler beim Bearbeiten von vsftpd (--purge):
Unterprozess installiertes post-removal-Skript gab den Fehlerwert 1 zurück
Verarbeite Trigger für ureadahead ...
ureadahead will be reprofiled on next reboot
Verarbeite Trigger für man-db ...
Fehler traten auf beim Bearbeiten von:
vsftpd
E: Sub-process /usr/bin/dpkg returned an error code (1)
Während der Paketinstallation
und dieses post-removel-Skript kann ich auch nicht löschen ! weil ich garnicht weiß watt das is ☺
|
hypnotizesic
(Themenstarter)
Anmeldungsdatum: 13. Januar 2010
Beiträge: 38
|
So ok habe alle komplett gelöscht !
Dann habe ich vsftpd wieder installiert und es so gemacht wie du geschrieben hast und wie nicht anders erwartet geht nich ^^ ( das ist jetzt kein vor Urteil gegen dich ) Es kommt immer : Status: Verbinde mit 127.0.0.1:21...
Status: Verbindung hergestellt, warte auf Willkommensnachricht...
Antwort: 220 (vsFTPd 2.2.0)
Befehl: USER ftpuser
Antwort: 331 Please specify the password.
Befehl: PASS ******
Antwort: 530 Login incorrect.
Fehler: Kritischer Fehler
Fehler: Herstellen der Verbindung zum Server fehlgeschlagen
|