Purpur
(Themenstarter)
Anmeldungsdatum: 15. Mai 2005
Beiträge: 346
|
mrkramps schrieb: Du solltest dir schon durchlesen, ...
Sorry - du hast völlig recht. Das habe ich da wohl recht voreilig hingeschrieben. 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107 | alex@shuttle:~$ sudo smartctl -a /dev/sda1
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.0.0-31-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Intenso SSD Sata III
Serial Number: AA010256180270004781
LU WWN Device Id: 5 000000 000000000
Firmware Version: R0411D
User Capacity: 253.403.070.464 bytes [253 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Oct 14 14:21:19 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 1) minutes.
Conveyance self-test routine
recommended polling time: ( 1) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0
5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 697
9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 143
12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 264
160 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 29852
161 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
163 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 13
164 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 26887
165 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 84
166 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
167 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 14
168 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 3000
169 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 100
175 Program_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0
176 Erase_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0
177 Wear_Leveling_Count 0x0000 100 100 050 Old_age Offline - 0
178 Used_Rsvd_Blk_Cnt_Chip 0x0000 100 100 000 Old_age Offline - 158
181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0
182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0
192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 20
194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 40 (Min/Max 40/40)
195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 134731
196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline - 42476
197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 3267
199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 2
232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 0
241 Total_LBAs_Written 0x0000 100 100 000 Old_age Offline - 34714
242 Total_LBAs_Read 0x0000 100 100 000 Old_age Offline - 132820
245 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 107548
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
6 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
Hier der von dir erfragte Output - interpretieren kann ich ihn nicht. Grüße
|
mrkramps
Anmeldungsdatum: 10. Oktober 2006
Beiträge: 5523
Wohnort: south central EL
|
Das Modell ist nicht in der Datenbank der smartmontools Device is: Not in smartctl database [for details use: -P showall] weswegen einige Attribute nicht erkannt werden. Man könnte jetzt die Datenbank aktualisieren, aber mir persönlich würden schon die erkannten Attribute reichen um diese SSD auszusortieren: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 697
9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 143
196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline - 42476
198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 3267 Bei einer Betriebsdauer von 143 Stunden wurden bereits 697 Sektoren als fehlerhaft aussortiert, nachdem 42476 Mal Daten aus fehlerhaften Sektoren umgeschichtet werden mussten, und dabei 3267 nicht korrigierbare Fehler beim Lesen/Schreiben auftraten. Die 143 Stunden dürfen da natürlich stehen, alles andere sollte 0 sein, ganz besonders bei der kurzen Betriebsdauer. Wenn da nach 14300 Stunden mal 7 Sektoren aussortiert worden wären, dann ist das normaler Verschleiß. Aber das hier ist definitiv ein Garantiefall oder Elektroschrott. Die SSD nach Möglichkeit mit Secure-Erase vollständig löschen. Dann entweder zurückschicken oder fachgerecht entsorgen.
|
Purpur
(Themenstarter)
Anmeldungsdatum: 15. Mai 2005
Beiträge: 346
|
mrkramps schrieb: ... nach Möglichkeit mit Secure-Erase vollständig löschen.
Erledigt.
Allerdings gibt GSmartContol nun (für mich) uneindeutige Informationen aus. Dazu 2 Screenshots (im Anhang) und das ErrorLog.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210 | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.0.0-31-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Intenso SSD Sata III
Serial Number: AA010256180270004781
LU WWN Device Id: 5 000000 000000000
Firmware Version: R0411D
User Capacity: 253,403,070,464 bytes [253 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Oct 14 15:41:41 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 1) minutes.
Conveyance self-test routine
recommended polling time: ( 1) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
5 Reallocated_Sector_Ct ------ 100 100 000 - 697
9 Power_On_Hours ------ 100 100 000 - 143
12 Power_Cycle_Count ------ 100 100 000 - 264
160 Unknown_Attribute ------ 100 100 000 - 29852
161 Unknown_Attribute ------ 100 100 000 - 0
163 Unknown_Attribute ------ 100 100 000 - 13
164 Unknown_Attribute ------ 100 100 000 - 26887
165 Unknown_Attribute ------ 100 100 000 - 84
166 Unknown_Attribute ------ 100 100 000 - 0
167 Unknown_Attribute ------ 100 100 000 - 14
168 Unknown_Attribute ------ 100 100 000 - 3000
169 Unknown_Attribute ------ 100 100 000 - 100
175 Program_Fail_Count_Chip ------ 100 100 000 - 0
176 Erase_Fail_Count_Chip ------ 100 100 000 - 0
177 Wear_Leveling_Count ------ 100 100 050 - 0
178 Used_Rsvd_Blk_Cnt_Chip ------ 100 100 000 - 158
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
192 Power-Off_Retract_Count ------ 100 100 000 - 20
194 Temperature_Celsius ------ 100 100 000 - 40 (Min/Max 40/40)
195 Hardware_ECC_Recovered ------ 100 100 000 - 134731
196 Reallocated_Event_Count ------ 100 100 016 - 42476
197 Current_Pending_Sector ------ 100 100 000 - 0
198 Offline_Uncorrectable ------ 100 100 000 - 3267
199 UDMA_CRC_Error_Count ------ 100 100 050 - 2
232 Available_Reservd_Space ------ 100 100 000 - 0
241 Total_LBAs_Written ------ 100 100 000 - 34714
242 Total_LBAs_Read ------ 100 100 000 - 132820
245 Unknown_Attribute ------ 100 100 000 - 107548
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 1 Comprehensive SMART error log
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 SATA NCQ Queued Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Conveyance offline Completed without error 00% 143 -
# 2 Extended offline Completed without error 00% 143 -
# 3 Short offline Completed without error 00% 143 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
7 0 65535 Read_scanning was completed without error
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 0 (0x0000)
SCT Support Level: 0
Device State: Active (0)
Current Temperature: 0 Celsius
Power Cycle Min/Max Temperature: 40/40 Celsius
Lifetime Min/Max Temperature: 0/40 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/100 Celsius
Min/Max Temperature Limit: 0/100 Celsius
Temperature History Size (Index): 128 (105)
Index Estimated Time Temperature Celsius
106 2019-10-14 13:34 ? -
... ..(106 skipped). .. -
85 2019-10-14 15:21 ? -
86 2019-10-14 15:22 40 *********************
... ..( 17 skipped). .. *********************
104 2019-10-14 15:40 40 *********************
105 2019-10-14 15:41 ? -
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 264 --- Lifetime Power-On Resets
0x01 0x010 4 143 --- Power-on Hours
0x01 0x018 6 2275061702 --- Logical Sectors Written
0x01 0x020 6 95692498 --- Number of Write Commands
0x01 0x028 6 8704524081 --- Logical Sectors Read
0x01 0x030 6 202402248 --- Number of Read Commands
0x02 ===== = = === == Free-Fall Statistics (empty) ==
0x03 ===== = = === == Rotating Media Statistics (empty) ==
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 42476 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 20 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (empty) ==
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 894 --- Number of Hardware Resets
0x06 0x018 4 2 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 2 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
Ist die SSD nun platt & leer oder nicht? Wie kann ich das prüfen? [edit] Noch ein Screenshot. [/edit]
- Bilder
|
Purpur
(Themenstarter)
Anmeldungsdatum: 15. Mai 2005
Beiträge: 346
|
Hallo alle,
die SSD ist platt. Somit ist das Problem der Datenrettung zu einem guten Ende gekommen.
Allen, die mir hierbei geholfen haben, danke ich sehr herzlich. Was sollte ein DAU wie ich auch ohne den geduldigen(!) Beistand von euch Cracks wohl machen. Vielleicht in eine digitale Röhre schauen ...
Jedenfalls noch einmal meinen großen Dank & Grüße, Alexander
|