Hallo!
Ich bin noch ein Einsteiger in Ubuntu kenn mich also noch nicht sehr gut aus!
So jetzt zu meinem Problem ich wollte meinen Alten Laptop: Medion MD 41700 für meinen Vater neu aufsetzten (vorher war Win XP drauf) Ubuntu läuft auch echt super hab auch schon die W-Lan Karte installiert! Bis hier hin alles super. Jetzt hab ich folgendes Problem das ich mein W-Lan erkenne nur kann ich es nicht auswählen wenn ich manuell Verbinde dann willer immer wieder von mir das Kennwort der W-Lan verschlüsselung! Wenn ich in der Fritz Box die Verschlüsselung rausnehme (freies W-Lan netz) dann funktioniert alles bestens! Ich hoffe mir kann jemand weiterhelfen
Gruß Flo
PS: hier die Daten zu meinem Problem:
Hier die Daten zum Netzwerk:
Name des Funknetzes (SSID): FRITZ!Box Fon WLAN 7170 Verschlüsselungsart: WPA2 Kennwort: XXX Modus: Infrastruktur Authentifizierung: WPA2-PSK Datenverschlüsselung: AES-CCMP
zum Laptop:
Kernelversion:
Linux kraft-laptop 2.6.32-31-generic #60-Ubuntu SMP Thu Mar 17 22:14:33 UTC 2011 i686 GNU/Linux
Abfrage für PCI und PCMCIA-Karten:
00:00.0 Host bridge [0600]: ATI Technologies Inc Radeon 9100 IGP Host Bridge [1002:5833] (rev 02) 00:01.0 PCI bridge [0604]: ATI Technologies Inc Radeon 9100 IGP AGP Bridge [1002:5838] 00:13.0 USB Controller [0c03]: ATI Technologies Inc OHCI USB Controller #1 [1002:4347] (rev 01) 00:13.1 USB Controller [0c03]: ATI Technologies Inc OHCI USB Controller #2 [1002:4348] (rev 01) 00:13.2 USB Controller [0c03]: ATI Technologies Inc EHCI USB Controller [1002:4345] (rev 01) 00:14.0 SMBus [0c05]: ATI Technologies Inc SMBus [1002:4353] (rev 18) 00:14.1 IDE interface [0101]: ATI Technologies Inc Dual Channel Bus Master PCI IDE Controller [1002:4349] 00:14.3 ISA bridge [0601]: ATI Technologies Inc Device [1002:434c] 00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP200 3COM 3C920B Ethernet Controller [1002:4342] 00:14.5 Multimedia audio controller [0401]: ATI Technologies Inc IXP150 AC'97 Audio Controller [1002:4341] 00:14.6 Modem [0703]: ATI Technologies Inc IXP AC'97 Modem [1002:434d] (rev 01) 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS300M AGP [Radeon Mobility 9100IGP] [1002:5835] 02:04.0 CardBus bridge [0607]: Texas Instruments PCI7420 CardBus Controller [104c:ac8e] 02:04.1 CardBus bridge [0607]: Texas Instruments PCI7420 CardBus Controller [104c:ac8e] 02:04.2 FireWire (IEEE 1394) [0c00]: Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller [104c:802e] 02:04.3 Mass storage controller [0180]: Texas Instruments PCI7420/7620 Combo CardBus, 1394a-2000 OHCI and SD/MS-Pro Controller [104c:ac8f] 02:05.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) 02:06.0 Network controller [0280]: Intersil Corporation ISL3886 [Prism Javelin/Prism Xbow] [1260:3886] (rev 01)
Netzwerkeinstellungen
cat /etc/network/interfaces:
auto lo iface lo inet loopback
cat /etc/resolv.conf:
# Generated by NetworkManager
domain fritz.box search fritz.box nameserver 192.168.178.1
cat /etc/hosts:
127.0.0.1 localhost 127.0.1.1 kraft-laptop # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts
sudo iwlist scan
lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan0 Scan completed : Cell 01 - Address: 00:15:0C:47:74:CB ESSID:"FRITZ!Box Fon WLAN 7170" Protocol:IEEE 802.11b Mode:Managed Frequency:2.467 GHz (Channel 12) Quality:65/100 Signal level:-54 dBm Noise level:-96 dBm Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Extra:bcn_int=100 Extra:atim=3 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK
Bearbeitet von praseodym:
Bitte verwende in Zukunft Codeblöcke, um die Übersicht im Forum zu verbessern, Danke.