sirbender
Anmeldungsdatum: 4. Februar 2011
Beiträge: 354
|
Hallo, Mein Problem: Wifi geht nicht mehr. Keine Verbindung zur Fritzbox. Asche auf mein Haupt, ich habe ein mintclean.sh laufen lassen, welches ich jedes Jahr mal laufen lassen da HDD Platz seit Einbau einer SSD knapp ist. Das Script raeumt alle unbenutzen Kernel auf, usw. Bisher hat das Skript nie Probleme gemacht. Eventuell ist es diesmal auch nicht schuld, aber es ist naheliegend. MEINE VERMUTUNG: ich nehme an, dass es die Datei rtl8192sefw.bin nicht findet. Wurde die wohl geloescht?! Die wichtigsten Zeilen sind:
[ 4.948756] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
[ 5.860416] rtl8192se 0000:03:00.0: Direct firmware load for rtlwifi/rtl8192sefw.bin failed with error -2
Ich habe jetzt von einem Xubuntu 16.04 Live USB gebootet. Hier funktioniert das Wifi wie gehabt. Ich habe nun den Ordner rtlwifi vom Live USB in die beiden Ordner:
lib/firmware und
/lib/firmware/4.4.0-98-generic
kopiert. Wenn ich nun den 4.4.0-98-generic boote geht das Wifi wieder. Ich weiss nicht woher die Datei rtl8192sefw.bin geladen wird, also von lib/firmware oder /lib/firmware/4.4.0-98-generic Ich habe nun auch kernel linux-image-4.4.0-109-generic installiert. Hier geht das Wifi auch nicht und den Trick den rtlwifi Ordner nach /lib/firmware/4.4.0-109-generic zu kopieren hat auch nicht gefruchtet. Bin ich jetzt fuer immer und ewig auf /lib/firmware/4.4.0-98-generic festgelegt oder kann ich das irgendwie fixen, dass bei neuen Treibern auch das Wifi wie gehabt funzt? Beim Installieren der neuen Kernel kam es zu folgender Warning: W: Can't drop privileges for downloading as file '/root/.synaptic/tmp//tmp_cl' couldn't be accessed by user '_apt'. - pkgAcquire::Run (13: Permission denied) Wenn ich bisher einen neuen Kernel installiert hab, funktionierte auch das Wifi tadellos. Was hab ich kaputt gemacht, dass mein Ubuntu das nicht mehr schafft und kann ich es irgendwie richten? vielen Dank,
sb
Moderiert von Taomon: Dieses Thema ist verschoben worden. Bitte beachte die als wichtig markierten Themen („Welche Themen gehören hier her und welche nicht?“)!
|
sirbender
(Themenstarter)
Anmeldungsdatum: 4. Februar 2011
Beiträge: 354
|
Wie funktioniert das eigentlich in Linux? Wenn man von einem Live-USB Stick bootet wird meistens/hoffentlich alle Hardware erkannt und die Treiber/Module geladen und das wird bei der Installation dann identisch gemacht. Diese "Hardwareerkennung" und Entscheiden welche Module/Treiber geladen werden geschieht nehme ich an nicht bei jedem Start sondern es gibt irgendwo eine Config wo das drinsteht? Und wenn man einen neuen Kernel installiert schaut der bei dem alten Kernel bzw. der Config nach was er so alles an Treibern/Modulen laden muss? Hab ich mir diese Config zerschossen und das eizige was funzt ist der eine Kernel der nicht durch das Aufraeumskript entfernt wurde? Sorry, bin offensichtlich ein ziemlicher DAU ☹
|
Neko486
Anmeldungsdatum: 24. März 2017
Beiträge: 21
|
Hi, du könntest zum Beispiel versuchen die fehlenden Pakete zu reparieren wenn ich da richtig informiert bin. | apt-get install --fix-missing
|
Um das gelöschte Paket wieder mit zu installierne.
Des Weiteren würde ich zum aufräumen wohl eher nehmen. Ich hoffe das hilft dir weiter. Gruß Neko
|
praseodym
Supporter
Anmeldungsdatum: 9. Februar 2009
Beiträge: 22097
Wohnort: ~
|
Zeig mal die Ausgaben von
ls -l /lib/firmware/rtlwifi/
locate rtl8192sefw.bin | grep lib
|
elektronenblitz63
Anmeldungsdatum: 16. Januar 2007
Beiträge: 29307
Wohnort: NRW
|
Halo, sirbender schrieb: Asche auf mein Haupt, ich habe ein mintclean.sh laufen lassen ...
so etwas macht man ja auch nicht, ohne zumindest mal das Skript vorab zu überprüfen, was es da genau macht. Immerhin musst Du es ja mit Root-Rechten aufrufen.
es geht also um Mint, dass genannte Xubuntu 16.04 ist ja fehlerfrei und nur vom Live-Medium - unterstützte dann doch linuxmintusers.de und schreibe dort Systembereinigungen macht man über apt oder z.B. auch über Synaptic ich gebe dir mal einen Tipp, damit Du in Zukunft solche simplen Probleme selbst beheben kannst, und poste jetzt nicht einfach die Lösung nutze bei solchen Problemem apt-file [search] [filename] es ist mehr als simpel und man weiß auch ohne nachzusehen eigentlich sofort was fehlt, wenn da schon steht „Direct firmware load ... failed with error -2“
|
sirbender
(Themenstarter)
Anmeldungsdatum: 4. Februar 2011
Beiträge: 354
|
Neko486 schrieb: Hi, du könntest zum Beispiel versuchen die fehlenden Pakete zu reparieren wenn ich da richtig informiert bin. | apt-get install --fix-missing
|
Um das gelöschte Paket wieder mit zu installierne.
Des Weiteren würde ich zum aufräumen wohl eher nehmen. Ich hoffe das hilft dir weiter. Gruß Neko
In beiden Faellen will apt-get nichts installieren bzw. entfernen.
|
sirbender
(Themenstarter)
Anmeldungsdatum: 4. Februar 2011
Beiträge: 354
|
praseodym schrieb: Zeig mal die Ausgaben von
ls -l /lib/firmware/rtlwifi/
locate rtl8192sefw.bin | grep lib
locate rtl8192sefw.bin | grep lib
/lib/firmware/4.4.0-98-generic/rtlwifi/rtl8192sefw.bin
/lib/firmware/rtlwifi/rtl8192sefw.bin Wie gesagt hab ich den rtlwifi folder an diese beiden stellen vom Live-USB kopiert. Ich hab jetzt mal geschaut in welchem package rtl8192sefw.bin eigentlich ist. Ergebnis: "linux-firmware" Das war bei mir aktuell nicht installiert. Also hab ich es installiert und gleich noch den neusten 4.4er und 4.13er Kernel hinterher. Werde jetzt mal testen ob das Wifi mit denen funktioniert ☺ Update ☹
Leider funktioniert es nicht. Schade, ich hatte gedacht, dass ich "linux-firmware" installiere und es nun wieder geht. Als Randinfo ist interessant, dass mein externer Monitor den ich an den Laptop angeschlossen habe mit den neu installierten Firmwares nicht erkannt wird und auch in "Display" nicht auftaucht. Desweiteren ist die Display-Aufloesung des Laptops auch nicht richtig. Scheint also nicht nur das Wifi im argen zu sein nach meinem fuckup ☹ Waer alles kein Problem da 4.4.0-98 gut funktioniert und ich bis 18.04 warten wuerde und dann neu installiere. Leider geistert ja gerade Meltdown und Spectre rum ich kann nicht auf aktuelle Kernels updaten ☹
Bin ich nun gezwungen 16.04 neu zu installieren?
|
Neko486
Anmeldungsdatum: 24. März 2017
Beiträge: 21
|
Huhu, damit wir dir weiter helfen können würde ich jetzt doch gerne die dmesg sowie die .Xorg.0.log sehen im Codeblock.
Die zweite Datei findest du unter /var/log/. Gruß Neko
|
sirbender
(Themenstarter)
Anmeldungsdatum: 4. Februar 2011
Beiträge: 354
|
Hallo, vielen Dank fuer eure Hilfe! Ich bin uebrigens im Moment mit dem 4.4.0-98 Kernel unterwegs wo alles funktioniert. Helfen da die dmesg und .log Ausgaben da ueberhaupt oder sollte ich in einen Kernel booten wo Wifi und der externe Monitor nicht funktioniert und dann ein dmesg machen? [ 0.000000] microcode: CPU0 microcode updated early to revision 0xe, date = 2013-06-26
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-98-generic (buildd@lcy01-03) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #121-Ubuntu SMP Tue Oct 10 14:24:03 UTC 2017 (Ubuntu 4.4.0-98.121-generic 4.4.90)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-98-generic root=UUID=89e308b2-e5ca-485c-bb0f-7784c58bfcc0 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb27bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb27c000-0x00000000bb281fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb282000-0x00000000bb35efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb35f000-0x00000000bb370fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb371000-0x00000000bb3f1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb3f2000-0x00000000bb40efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb40f000-0x00000000bb46efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb46f000-0x00000000bb667fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb668000-0x00000000bb6e7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb6e8000-0x00000000bb70efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb70f000-0x00000000bb716fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb717000-0x00000000bb71efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb71f000-0x00000000bb76afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb76b000-0x00000000bb776fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb777000-0x00000000bb779fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb77a000-0x00000000bb780fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb781000-0x00000000bb781fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb782000-0x00000000bb78afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb78b000-0x00000000bb78bfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb78c000-0x00000000bb79efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb79f000-0x00000000bb7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb7ff000-0x00000000bb7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017bffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000180000000-0x00000001bbffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: LENOVO 4313CTO/4313CTO, BIOS 6MET92WW (1.52 ) 09/26/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1bc000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask F80000000 write-back
[ 0.000000] 4 base 180000000 mask FC0000000 write-back
[ 0.000000] 5 base 1BC000000 mask FFC000000 uncachable
[ 0.000000] 6 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 1, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 2, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 3, base: 4GB, range: 2GB, type WB
[ 0.000000] reg 4, base: 6GB, range: 1GB, type WB
[ 0.000000] reg 5, base: 7104MB, range: 64MB, type UC
[ 0.000000] reg 6, base: 3008MB, range: 64MB, type UC
[ 0.000000] total RAM covered: 6016M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 6 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3008MB, range: 64MB, type UC
[ 0.000000] reg 3, base: 4GB, range: 2GB, type WB
[ 0.000000] reg 4, base: 6GB, range: 1GB, type WB
[ 0.000000] reg 5, base: 7104MB, range: 64MB, type UC
[ 0.000000] e820: update [mem 0xbc000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbb800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f6890-0x000f689f] mapped at [ffff8800000f6890]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] BRK [0x0220d000, 0x0220dfff] PGTABLE
[ 0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE
[ 0.000000] BRK [0x0220f000, 0x0220ffff] PGTABLE
[ 0.000000] BRK [0x02210000, 0x02210fff] PGTABLE
[ 0.000000] BRK [0x02211000, 0x02211fff] PGTABLE
[ 0.000000] BRK [0x02212000, 0x02212fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33648000-0x35b1bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6850 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x00000000BB7EF0C6 00009C (v01 LENOVO TP-6M 00001520 LTP 00000000)
[ 0.000000] ACPI: FACP 0x00000000BB7EF200 0000F4 (v04 LENOVO TP-6M 00001520 LNVO 00000001)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20150930/tbfadt-623)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20150930/tbfadt-704)
[ 0.000000] ACPI: DSDT 0x00000000BB7EF5D1 00F56A (v01 LENOVO TP-6M 00001520 MSFT 03000001)
[ 0.000000] ACPI: FACS 0x00000000BB6E7000 000040
[ 0.000000] ACPI: FACS 0x00000000BB6E7000 000040
[ 0.000000] ACPI: SSDT 0x00000000BB7EF3B4 00021D (v01 LENOVO TP-6M 00001520 MSFT 03000001)
[ 0.000000] ACPI: ECDT 0x00000000BB7FEB3B 000052 (v01 LENOVO TP-6M 00001520 LNVO 00000001)
[ 0.000000] ACPI: APIC 0x00000000BB7FEB8D 000084 (v01 LENOVO TP-6M 00001520 LNVO 00000001)
[ 0.000000] ACPI: MCFG 0x00000000BB7FEC49 00003C (v01 LENOVO TP-6M 00001520 LNVO 00000001)
[ 0.000000] ACPI: HPET 0x00000000BB7FEC85 000038 (v01 LENOVO TP-6M 00001520 LNVO 00000001)
[ 0.000000] ACPI: ASF! 0x00000000BB7FEDBE 0000A4 (v16 LENOVO TP-6M 00001520 PTL 00000001)
[ 0.000000] ACPI: SLIC 0x00000000BB7FEE62 000176 (v01 LENOVO TP-6M 00001520 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x00000000BB7FEFD8 000028 (v01 LENOVO TP-6M 00001520 LTP 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BB6E591A 00084B (v01 LENOVO TP-6M 00001520 INTL 20050513)
[ 0.000000] ACPI: TCPA 0x00000000BB78B000 000032 (v02 PTL CRESTLN 06040000 00005A52)
[ 0.000000] ACPI: DMAR 0x00000000BB781000 0000B8 (v01 INTEL CP_DALE 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BB779000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 0x00000000BB778000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 0x00000000BB777000 00049F (v01 PmRef ApTst 00003000 INTL 20060912)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001bbffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1bbff6000-0x1bbffafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001bbffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bb27bfff]
[ 0.000000] node 0: [mem 0x00000000bb282000-0x00000000bb35efff]
[ 0.000000] node 0: [mem 0x00000000bb40f000-0x00000000bb46efff]
[ 0.000000] node 0: [mem 0x00000000bb70f000-0x00000000bb716fff]
[ 0.000000] node 0: [mem 0x00000000bb71f000-0x00000000bb76afff]
[ 0.000000] node 0: [mem 0x00000000bb7ff000-0x00000000bb7fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000017bffffff]
[ 0.000000] node 0: [mem 0x0000000180000000-0x00000001bbffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bbffffff]
[ 0.000000] On node 0 totalpages: 1520555
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11921 pages used for memmap
[ 0.000000] DMA32 zone: 762894 pages, LIFO batch:31
[ 0.000000] Normal zone: 12032 pages used for memmap
[ 0.000000] Normal zone: 753664 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xbe000000-0xbfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb27c000-0xbb281fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb35f000-0xbb370fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb371000-0xbb3f1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb3f2000-0xbb40efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb46f000-0xbb667fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb668000-0xbb6e7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb6e8000-0xbb70efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb717000-0xbb71efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb76b000-0xbb776fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb777000-0xbb779fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb77a000-0xbb780fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb781000-0xbb781fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb782000-0xbb78afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb78b000-0xbb78bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb78c000-0xbb79efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb79f000-0xbb7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb800000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x17c000000-0x17fffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 34 pages/cpu @ffff8801bbc00000 s98328 r8192 d32744 u524288
[ 0.000000] pcpu-alloc: s98328 r8192 d32744 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1496517
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-98-generic root=UUID=89e308b2-e5ca-485c-bb0f-7784c58bfcc0 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5860720K/6082220K available (8484K kernel code, 1294K rwdata, 3988K rodata, 1492K init, 1316K bss, 221500K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2393.954 MHz processor
[ 0.000032] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.90 BogoMIPS (lpj=9575816)
[ 0.000035] pid_max: default: 32768 minimum: 301
[ 0.000042] ACPI: Core revision 20150930
[ 0.014150] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.014173] Security Framework initialized
[ 0.014176] Yama: becoming mindful.
[ 0.014196] AppArmor: AppArmor initialized
[ 0.014697] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.016903] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.018004] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.018016] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.018308] Initializing cgroup subsys io
[ 0.018314] Initializing cgroup subsys memory
[ 0.018321] Initializing cgroup subsys devices
[ 0.018324] Initializing cgroup subsys freezer
[ 0.018327] Initializing cgroup subsys net_cls
[ 0.018329] Initializing cgroup subsys perf_event
[ 0.018331] Initializing cgroup subsys net_prio
[ 0.018336] Initializing cgroup subsys hugetlb
[ 0.018337] Initializing cgroup subsys pids
[ 0.018357] CPU: Physical Processor ID: 0
[ 0.018358] CPU: Processor Core ID: 0
[ 0.018365] mce: CPU supports 9 MCE banks
[ 0.018375] CPU0: Thermal monitoring enabled (TM1)
[ 0.018382] process: using mwait in idle threads
[ 0.018386] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.018387] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.018709] Freeing SMP alternatives memory: 32K
[ 0.039208] ftrace: allocating 32154 entries in 126 pages
[ 0.054173] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.054177] smpboot: Max logical packages: 2
[ 0.054195] DMAR: Host address width 36
[ 0.054197] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.054204] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
[ 0.054205] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[ 0.054210] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c0000020230272 ecap 1000
[ 0.054211] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[ 0.054215] DMAR: dmar2: reg_base_addr fed93000 ver 1:0 cap c9008020630272 ecap 1000
[ 0.054216] DMAR: RMRR base: 0x000000bb6e9000 end: 0x000000bb6fffff
[ 0.054218] DMAR: RMRR base: 0x000000bdc00000 end: 0x000000bfffffff
[ 0.054718] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.201715] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz (family: 0x6, model: 0x25, stepping: 0x2)
[ 0.201734] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.201752] core: CPUID marked event: 'bus cycles' unavailable
[ 0.201755] ... version: 3
[ 0.201755] ... bit width: 48
[ 0.201756] ... generic registers: 4
[ 0.201757] ... value mask: 0000ffffffffffff
[ 0.201758] ... max period: 000000007fffffff
[ 0.201759] ... fixed-purpose events: 3
[ 0.201760] ... event mask: 000000070000000f
[ 0.202596] x86: Booting SMP configuration:
[ 0.202598] .... node #0, CPUs: #1
[ 0.205107] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.205214] #2
[ 0.205661] microcode: CPU2 microcode updated early to revision 0xe, date = 2013-06-26
[ 0.207866] #3
[ 0.210090] x86: Booted up 1 node, 4 CPUs
[ 0.210095] smpboot: Total of 4 processors activated (19151.63 BogoMIPS)
[ 0.212543] devtmpfs: initialized
[ 0.215048] evm: security.selinux
[ 0.215049] evm: security.SMACK64
[ 0.215050] evm: security.SMACK64EXEC
[ 0.215051] evm: security.SMACK64TRANSMUTE
[ 0.215052] evm: security.SMACK64MMAP
[ 0.215053] evm: security.ima
[ 0.215054] evm: security.capability
[ 0.215130] PM: Registering ACPI NVS region [mem 0xbb371000-0xbb3f1fff] (528384 bytes)
[ 0.215139] PM: Registering ACPI NVS region [mem 0xbb668000-0xbb6e7fff] (524288 bytes)
[ 0.215147] PM: Registering ACPI NVS region [mem 0xbb76b000-0xbb776fff] (49152 bytes)
[ 0.215148] PM: Registering ACPI NVS region [mem 0xbb77a000-0xbb780fff] (28672 bytes)
[ 0.215150] PM: Registering ACPI NVS region [mem 0xbb782000-0xbb78afff] (36864 bytes)
[ 0.215151] PM: Registering ACPI NVS region [mem 0xbb78c000-0xbb79efff] (77824 bytes)
[ 0.215235] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.215249] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.215347] pinctrl core: initialized pinctrl subsystem
[ 0.215473] RTC time: 0:11:47, date: 01/15/18
[ 0.215588] NET: Registered protocol family 16
[ 0.225726] cpuidle: using governor ladder
[ 0.237721] cpuidle: using governor menu
[ 0.237728] PCCT header not found.
[ 0.237814] Simple Boot Flag at 0x35 set to 0x1
[ 0.237841] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.237843] ACPI: bus type PCI registered
[ 0.237845] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.237914] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.237916] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.237934] PCI: Using configuration type 1 for base access
[ 0.250113] ACPI: Added _OSI(Module Device)
[ 0.250115] ACPI: Added _OSI(Processor Device)
[ 0.250116] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.250117] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.251368] ACPI : EC: EC description table is found, configuring boot EC
[ 0.251382] ACPI : EC: EC started
[ 0.255143] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.329724] ACPI: Dynamic OEM Table Load:
[ 0.329731] ACPI: SSDT 0xFFFF8801B3CCA800 00046F (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.330153] ACPI: Dynamic OEM Table Load:
[ 0.330159] ACPI: SSDT 0xFFFF8801B3CCB000 0006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.330743] ACPI: Dynamic OEM Table Load:
[ 0.330748] ACPI: SSDT 0xFFFF8801B3CFAC00 000303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.331172] ACPI: Dynamic OEM Table Load:
[ 0.331176] ACPI: SSDT 0xFFFF8801B3D34200 000119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.332997] ACPI: Interpreter enabled
[ 0.333015] ACPI: (supports S0 S3 S4 S5)
[ 0.333017] ACPI: Using IOAPIC for interrupt routing
[ 0.333039] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.338806] ACPI: Power Resource [PUBS] (on)
[ 0.339491] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[ 0.341634] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[ 0.343529] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.343611] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.343674] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.343755] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.343834] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.343914] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.343977] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.344057] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.344136] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
[ 0.344140] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.344144] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.344195] PCI host bridge to bus 0000:ff
[ 0.344198] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.344205] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.344261] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.344312] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.344356] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.344399] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.344441] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.344509] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.344513] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.344668] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.344741] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.344743] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.344745] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.344747] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.344912] PCI host bridge to bus 0000:00
[ 0.344914] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.344916] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.344918] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.344920] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.344921] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.344923] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.344924] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.344930] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.344949] DMAR: Disabling batched IOTLB flush on Ironlake
[ 0.345012] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[ 0.345026] pci 0000:00:02.0: reg 0x10: [mem 0xf2000000-0xf23fffff 64bit]
[ 0.345031] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.345035] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807]
[ 0.345157] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.345195] pci 0000:00:16.0: reg 0x10: [mem 0xf2827800-0xf282780f 64bit]
[ 0.345274] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.345349] pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002
[ 0.345384] pci 0000:00:16.3: reg 0x10: [io 0x1808-0x180f]
[ 0.345396] pci 0000:00:16.3: reg 0x14: [mem 0xf2624000-0xf2624fff]
[ 0.345545] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
[ 0.345581] pci 0000:00:19.0: reg 0x10: [mem 0xf2600000-0xf261ffff]
[ 0.345593] pci 0000:00:19.0: reg 0x14: [mem 0xf2625000-0xf2625fff]
[ 0.345604] pci 0000:00:19.0: reg 0x18: [io 0x1820-0x183f]
[ 0.345674] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.345711] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.345759] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.345793] pci 0000:00:1a.0: reg 0x10: [mem 0xf2828000-0xf28283ff]
[ 0.345882] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.345918] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.345964] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.346000] pci 0000:00:1b.0: reg 0x10: [mem 0xf2620000-0xf2623fff 64bit]
[ 0.346089] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.346139] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.346181] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.346278] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.346318] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.346360] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.346456] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.346495] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.346539] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[ 0.346636] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.346675] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.346717] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.346813] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.346853] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.346899] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.346933] pci 0000:00:1d.0: reg 0x10: [mem 0xf2828400-0xf28287ff]
[ 0.347019] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.347057] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.347098] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.347225] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
[ 0.347389] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[ 0.347425] pci 0000:00:1f.2: reg 0x10: [io 0x1860-0x1867]
[ 0.347436] pci 0000:00:1f.2: reg 0x14: [io 0x1814-0x1817]
[ 0.347447] pci 0000:00:1f.2: reg 0x18: [io 0x1818-0x181f]
[ 0.347457] pci 0000:00:1f.2: reg 0x1c: [io 0x1810-0x1813]
[ 0.347468] pci 0000:00:1f.2: reg 0x20: [io 0x1840-0x185f]
[ 0.347479] pci 0000:00:1f.2: reg 0x24: [mem 0xf2827000-0xf28277ff]
[ 0.347524] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.347593] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.347616] pci 0000:00:1f.3: reg 0x10: [mem 0xf2828800-0xf28288ff 64bit]
[ 0.347646] pci 0000:00:1f.3: reg 0x20: [io 0x1880-0x189f]
[ 0.347737] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.347775] pci 0000:00:1f.6: reg 0x10: [mem 0xf2626000-0xf2626fff 64bit]
[ 0.347950] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.348131] pci 0000:03:00.0: [10ec:8172] type 00 class 0x028000
[ 0.348327] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.348391] pci 0000:03:00.0: reg 0x14: [mem 0xf2400000-0xf2403fff]
[ 0.349035] pci 0000:03:00.0: supports D1 D2
[ 0.349037] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.353792] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.353800] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.353810] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.353895] acpiphp: Slot [1] registered
[ 0.353901] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.353906] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.353910] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.353918] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.354037] pci 0000:0d:00.0: [1180:e822] type 00 class 0x080500
[ 0.354078] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.354101] pci 0000:0d:00.0: reg 0x10: [mem 0xf2500000-0xf25000ff]
[ 0.354255] pci 0000:0d:00.0: supports D1 D2
[ 0.354256] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.354391] pci 0000:0d:00.1: [1180:e230] type 00 class 0x088000
[ 0.354439] pci 0000:0d:00.1: reg 0x10: [mem 0xf2500400-0xf25004ff]
[ 0.354582] pci 0000:0d:00.1: supports D1 D2
[ 0.354584] pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.354713] pci 0000:0d:00.3: [1180:e832] type 00 class 0x0c0010
[ 0.354760] pci 0000:0d:00.3: reg 0x10: [mem 0xf2500800-0xf2500fff]
[ 0.354904] pci 0000:0d:00.3: supports D1 D2
[ 0.354905] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.361806] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.361814] pci 0000:00:1c.4: bridge window [mem 0xf2500000-0xf25fffff]
[ 0.361898] pci 0000:00:1e.0: PCI bridge to [bus 0e] (subtractive decode)
[ 0.361910] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.361912] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.361914] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.361916] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.361917] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.361919] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
[ 0.363516] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.363593] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.363715] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.363717] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.363720] vgaarb: loaded
[ 0.363721] vgaarb: bridge control possible 0000:00:02.0
[ 0.363963] SCSI subsystem initialized
[ 0.364018] libata version 3.00 loaded.
[ 0.364043] ACPI: bus type USB registered
[ 0.364059] usbcore: registered new interface driver usbfs
[ 0.364069] usbcore: registered new interface driver hub
[ 0.364088] usbcore: registered new device driver usb
[ 0.364246] PCI: Using ACPI for IRQ routing
[ 0.374019] PCI: pci_cache_line_size set to 64 bytes
[ 0.374291] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.374293] e820: reserve RAM buffer [mem 0xbb27c000-0xbbffffff]
[ 0.374296] e820: reserve RAM buffer [mem 0xbb35f000-0xbbffffff]
[ 0.374298] e820: reserve RAM buffer [mem 0xbb46f000-0xbbffffff]
[ 0.374301] e820: reserve RAM buffer [mem 0xbb717000-0xbbffffff]
[ 0.374303] e820: reserve RAM buffer [mem 0xbb76b000-0xbbffffff]
[ 0.374305] e820: reserve RAM buffer [mem 0xbb800000-0xbbffffff]
[ 0.374440] NetLabel: Initializing
[ 0.374442] NetLabel: domain hash size = 128
[ 0.374442] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.374456] NetLabel: unlabeled traffic allowed by default
[ 0.374550] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.374555] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.376573] amd_nb: Cannot enumerate AMD northbridges
[ 0.376590] clocksource: Switched to clocksource hpet
[ 0.383528] AppArmor: AppArmor Filesystem Enabled
[ 0.383618] pnp: PnP ACPI init
[ 0.385115] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.385117] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.385119] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.385121] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.385123] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.385125] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.385127] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.385128] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.385130] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.385132] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.385134] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.385136] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.385138] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.385140] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.385144] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.385506] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.385509] system 00:01: [io 0x1000-0x107f] could not be reserved
[ 0.385511] system 00:01: [io 0x1180-0x11ff] has been reserved
[ 0.385513] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.385515] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.385517] system 00:01: [io 0x1600-0x1641] has been reserved
[ 0.385519] system 00:01: [io 0x1644-0x167f] could not be reserved
[ 0.385521] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.385523] system 00:01: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.385525] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.385527] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.385529] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.385531] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.385532] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.385534] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.385537] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.385594] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.385617] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.385642] pnp 00:04: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 0.386781] pnp: PnP ACPI: found 5 devices
[ 0.393449] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.393509] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.393524] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.393527] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.393533] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.393544] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.393547] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.393553] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.393557] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.393565] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.393571] pci 0000:00:1c.4: bridge window [mem 0xf2500000-0xf25fffff]
[ 0.393581] pci 0000:00:1e.0: PCI bridge to [bus 0e]
[ 0.393596] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.393597] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.393599] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.393601] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.393602] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.393604] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff window]
[ 0.393606] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.393607] pci_bus 0000:03: resource 1 [mem 0xf2400000-0xf24fffff]
[ 0.393609] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ 0.393611] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[ 0.393612] pci_bus 0000:05: resource 2 [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.393614] pci_bus 0000:0d: resource 1 [mem 0xf2500000-0xf25fffff]
[ 0.393616] pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7 window]
[ 0.393618] pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff window]
[ 0.393619] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.393621] pci_bus 0000:0e: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.393623] pci_bus 0000:0e: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.393624] pci_bus 0000:0e: resource 9 [mem 0xc0000000-0xfebfffff window]
[ 0.393662] NET: Registered protocol family 2
[ 0.393864] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.394077] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.394375] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.394420] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.394478] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.394578] NET: Registered protocol family 1
[ 0.394606] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.395017] PCI: CLS 64 bytes, default 64
[ 0.395082] Unpacking initramfs...
[ 0.998953] Freeing initrd memory: 37712K
[ 0.999070] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.999073] software IO TLB [mem 0xb727c000-0xbb27c000] (64MB) mapped at [ffff8800b727c000-ffff8800bb27bfff]
[ 0.999274] Scanning for low memory corruption every 60 seconds
[ 0.999676] audit: initializing netlink subsys (disabled)
[ 0.999696] audit: type=2000 audit(1515975107.804:1): initialized
[ 1.000077] Initialise system trusted keyring
[ 1.000193] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.001741] zbud: loaded
[ 1.001941] VFS: Disk quotas dquot_6.6.0
[ 1.001976] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.002248] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.002504] fuse init (API version 7.23)
[ 1.002659] Key type big_key registered
[ 1.002677] Allocating IMA MOK and blacklist keyrings.
[ 1.003135] Key type asymmetric registered
[ 1.003139] Asymmetric key parser 'x509' registered
[ 1.003181] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.003219] io scheduler noop registered
[ 1.003222] io scheduler deadline registered (default)
[ 1.003253] io scheduler cfq registered
[ 1.003784] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.003790] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.003819] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[ 1.003820] vesafb: scrolling: redraw
[ 1.003821] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.003840] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90001000000, using 4032k, total 4032k
[ 1.003943] Console: switching to colour frame buffer device 160x50
[ 1.003971] fb0: VESA VGA frame buffer device
[ 1.003986] intel_idle: MWAIT substates: 0x1120
[ 1.003988] intel_idle: v0.4.1 model 0x25
[ 1.003989] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.004458] ACPI: AC Adapter [AC] (on-line)
[ 1.004526] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.004671] ACPI: Lid Switch [LID]
[ 1.004712] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.004716] ACPI: Sleep Button [SLPB]
[ 1.004756] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.004758] ACPI: Power Button [PWRF]
[ 1.009317] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.009322] ACPI: Thermal Zone [THM0] (45 C)
[ 1.009392] GHES: HEST is not enabled!
[ 1.009613] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.009662] ACPI: Battery Slot [BAT0] (battery absent)
[ 1.033215] 0000:00:16.3: ttyS4 at I/O 0x1808 (irq = 17, base_baud = 115200) is a 16550A
[ 1.033950] Linux agpgart interface v0.103
[ 1.034092] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 1.034128] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.034784] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 1.035054] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.038494] loop: module loaded
[ 1.038722] libphy: Fixed MDIO Bus: probed
[ 1.038726] tun: Universal TUN/TAP device driver, 1.6
[ 1.038727] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.038775] PPP generic driver version 2.4.2
[ 1.038844] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.038850] ehci-pci: EHCI PCI platform driver
[ 1.038990] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.038998] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.039012] ehci-pci 0000:00:1a.0: debug port 2
[ 1.042956] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.042971] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf2828000
[ 1.052636] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.052716] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.052718] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.052720] usb usb1: Product: EHCI Host Controller
[ 1.052721] usb usb1: Manufacturer: Linux 4.4.0-98-generic ehci_hcd
[ 1.052723] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.052906] hub 1-0:1.0: USB hub found
[ 1.052919] hub 1-0:1.0: 3 ports detected
[ 1.053142] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.053152] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.053165] ehci-pci 0000:00:1d.0: debug port 2
[ 1.057111] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.057123] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf2828400
[ 1.068716] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.068828] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.068831] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.068832] usb usb2: Product: EHCI Host Controller
[ 1.068834] usb usb2: Manufacturer: Linux 4.4.0-98-generic ehci_hcd
[ 1.068835] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.068998] hub 2-0:1.0: USB hub found
[ 1.069008] hub 2-0:1.0: 3 ports detected
[ 1.069144] ehci-platform: EHCI generic platform driver
[ 1.069158] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.069163] ohci-pci: OHCI PCI platform driver
[ 1.069173] ohci-platform: OHCI generic platform driver
[ 1.069181] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.069239] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.073624] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.073629] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.073826] mousedev: PS/2 mouse device common for all mice
[ 1.074131] rtc_cmos 00:02: RTC can wake from S4
[ 1.074282] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.074312] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.074319] i2c /dev entries driver
[ 1.074471] device-mapper: uevent: version 1.0.3
[ 1.074553] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 1.074587] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.075030] NET: Registered protocol family 10
[ 1.075302] NET: Registered protocol family 17
[ 1.075323] Key type dns_resolver registered
[ 1.075740] microcode: CPU0 sig=0x20652, pf=0x10, revision=0xe
[ 1.075755] microcode: CPU1 sig=0x20652, pf=0x10, revision=0xe
[ 1.075764] microcode: CPU2 sig=0x20652, pf=0x10, revision=0xe
[ 1.075781] microcode: CPU3 sig=0x20652, pf=0x10, revision=0xe
[ 1.075870] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.076280] registered taskstats version 1
[ 1.076314] Loading compiled-in X.509 certificates
[ 1.077547] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.078369] Loaded X.509 cert 'Build time autogenerated kernel key: 7431eaeda5a51458aeb00f8de0f18f89e178d882'
[ 1.078410] zswap: loaded using pool lzo/zbud
[ 1.080537] Key type trusted registered
[ 1.084672] Key type encrypted registered
[ 1.084680] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.084684] ima: No TPM chip found, activating TPM-bypass!
[ 1.084709] evm: HMAC attrs: 0x1
[ 1.085267] Magic number: 2:707:152
[ 1.085429] rtc_cmos 00:02: setting system clock to 2018-01-15 00:11:48 UTC (1515975108)
[ 1.091006] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.091009] EDD information not available.
[ 1.091240] PM: Hibernation image not present or could not be loaded.
[ 1.094157] Freeing unused kernel memory: 1492K
[ 1.094162] Write protecting the kernel read-only data: 14336k
[ 1.095181] Freeing unused kernel memory: 1744K
[ 1.095788] Freeing unused kernel memory: 108K
[ 1.118051] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.118195] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.118223] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.118257] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.119244] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.119295] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.130993] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.131039] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.131056] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.131510] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.214370] wmi: Mapper loaded
[ 1.223664] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.245695] pps_core: LinuxPPS API ver. 1 registered
[ 1.245701] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.250086] PTP clock support registered
[ 1.250410] sdhci: Secure Digital Host Controller Interface driver
[ 1.250415] sdhci: Copyright(c) Pierre Ossman
[ 1.255715] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 1)
[ 1.256035] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.256082] sdhci-pci 0000:0d:00.0: No vmmc regulator found
[ 1.256087] sdhci-pci 0000:0d:00.0: No vqmmc regulator found
[ 1.257615] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[ 1.260874] ahci 0000:00:1f.2: version 3.0
[ 1.261176] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.261246] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
[ 1.261256] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 1.268873] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.268879] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.278781] [drm] Initialized drm 1.1.0 20060810
[ 1.291445] scsi host0: ahci
[ 1.291771] scsi host1: ahci
[ 1.292064] scsi host2: ahci
[ 1.292310] scsi host3: ahci
[ 1.292553] scsi host4: ahci
[ 1.292831] scsi host5: ahci
[ 1.292981] ata1: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827100 irq 24
[ 1.292988] ata2: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827180 irq 24
[ 1.292992] ata3: DUMMY
[ 1.292995] ata4: DUMMY
[ 1.293001] ata5: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827300 irq 24
[ 1.293007] ata6: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827380 irq 24
[ 1.293536] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.336718] firewire_ohci 0000:0d:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 1.392732] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.392763] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.478867] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:39:6b:bd
[ 1.478876] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.478947] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
[ 1.479067] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 1.479305] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[ 1.479471] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 1.480505] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 1.480520] [drm] Memory usable by graphics device = 2048M
[ 1.480527] checking generic (d0000000 3f0000) vs hw (d0000000 10000000)
[ 1.480530] fb: switching to inteldrmfb from VESA VGA
[ 1.480582] Console: switching to colour dummy device 80x25
[ 1.480768] [drm] Replacing VGA console driver
[ 1.488855] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.488858] [drm] Driver supports precise vblank timestamp query.
[ 1.490377] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.525188] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.525195] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.525346] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.525353] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.525592] hub 1-1:1.0: USB hub found
[ 1.525709] hub 1-1:1.0: 6 ports detected
[ 1.525798] hub 2-1:1.0: USB hub found
[ 1.525988] hub 2-1:1.0: 8 ports detected
[ 1.616791] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.617746] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.617751] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.617756] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.617917] ata1.00: ATA-9: ADATA SP550, P0330AA, max UDMA/133
[ 1.617922] ata1.00: 468862128 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
[ 1.618436] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.618442] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.618447] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.618813] ata1.00: configured for UDMA/133
[ 1.619095] scsi 0:0:0:0: Direct-Access ATA ADATA SP550 0AA PQ: 0 ANSI: 5
[ 1.619501] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 1.619509] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.619591] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.619702] sd 0:0:0:0: [sda] Write Protect is off
[ 1.619710] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.619763] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.620661] sda: sda1 sda2 sda3
[ 1.621339] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.639487] fbcon: inteldrmfb (fb0) is primary device
[ 1.639723] Console: switching to colour frame buffer device 200x56
[ 1.639864] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.642776] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 1.643117] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 1.643297] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 1.796709] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.796727] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 1.836940] firewire_core 0000:0d:00.3: created device fw0: GUID 001f16ff396bbdff, S400
[ 1.892426] usb 2-1.1: New USB device found, idVendor=04b3, idProduct=3022
[ 1.892432] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.892436] usb 2-1.1: Product: IBM Preferred Pro USB Fingerprint Keyboard
[ 1.892440] usb 2-1.1: Manufacturer: Chicony
[ 1.893042] hub 2-1.1:1.0: USB hub found
[ 1.893400] hub 2-1.1:1.0: 2 ports detected
[ 1.893667] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[ 1.893671] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.893675] usb 1-1.4: Product: Broadcom Bluetooth Device
[ 1.893678] usb 1-1.4: Manufacturer: Broadcom Corp
[ 1.893681] usb 1-1.4: SerialNumber: 002713954474
[ 1.936730] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.939347] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.939621] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.941192] ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, LT09, max UDMA/66
[ 1.943887] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.944099] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.945553] ata2.00: configured for UDMA/66
[ 1.947405] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT30N LT09 PQ: 0 ANSI: 5
[ 1.963088] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.963093] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.963316] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.963447] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.964658] usb 2-1.2: new full-speed USB device number 4 using ehci-pci
[ 1.964686] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[ 1.996661] tsc: Refined TSC clocksource calibration: 2394.000 MHz
[ 1.996669] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22821391a86, max_idle_ns: 440795325644 ns
[ 2.060787] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c52f
[ 2.060794] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.060798] usb 2-1.2: Product: USB Receiver
[ 2.060801] usb 2-1.2: Manufacturer: Logitech
[ 2.062581] usb 1-1.6: New USB device found, idVendor=17ef, idProduct=480f
[ 2.062586] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.062590] usb 1-1.6: Product: Integrated Camera
[ 2.062593] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.075449] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.085600] usbcore: registered new interface driver usbhid
[ 2.085604] usbhid: USB HID core driver
[ 2.089611] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C52F.0001/input/input7
[ 2.089911] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0
[ 2.091190] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:046D:C52F.0002/input/input8
[ 2.136307] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[ 2.145188] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1
[ 2.168693] usb 2-1.1.1: new full-speed USB device number 5 using ehci-pci
[ 2.224032] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000/0x0, board id: 0, fw id: 578367
[ 2.224041] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.265415] usb 2-1.1.1: New USB device found, idVendor=04b3, idProduct=3021
[ 2.265421] usb 2-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.265426] usb 2-1.1.1: Product: IBM Preferred Pro USB Fingerprint Keyboard
[ 2.265429] usb 2-1.1.1: Manufacturer: Chicony
[ 2.268017] input: Chicony IBM Preferred Pro USB Fingerprint Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.0/0003:04B3:3021.0003/input/input9
[ 2.280156] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 2.280697] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.320977] hid-generic 0003:04B3:3021.0003: input,hidraw2: USB HID v1.10 Keyboard [Chicony IBM Preferred Pro USB Fingerprint Keyboard] on usb-0000:00:1d.0-1.1.1/input0
[ 2.322689] hid-generic 0003:04B3:3021.0004: hiddev0,hidraw3: USB HID v1.10 Device [Chicony IBM Preferred Pro USB Fingerprint Keyboard] on usb-0000:00:1d.0-1.1.1/input1
[ 2.392725] usb 2-1.1.2: new full-speed USB device number 6 using ehci-pci
[ 2.486797] usb 2-1.1.2: New USB device found, idVendor=0483, idProduct=2016
[ 2.486803] usb 2-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.486807] usb 2-1.1.2: Product: Biometric Coprocessor
[ 2.486811] usb 2-1.1.2: Manufacturer: STMicroelectronics
[ 2.600735] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.996871] clocksource: Switched to clocksource tsc
[ 3.667764] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.674216] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 4.674493] systemd[1]: Detected architecture x86-64.
[ 4.674755] systemd[1]: Set hostname to <usul-T510>.
[ 4.838195] systemd[1]: Listening on Journal Socket.
[ 4.838367] systemd[1]: Listening on Syslog Socket.
[ 4.838541] systemd[1]: Created slice User and Session Slice.
[ 4.838567] systemd[1]: Reached target Encrypted Volumes.
[ 4.838613] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.838666] systemd[1]: Listening on udev Kernel Socket.
[ 4.838894] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.838965] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.839020] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.839155] systemd[1]: Created slice System Slice.
[ 4.852959] systemd[1]: Starting Uncomplicated firewall...
[ 4.853738] systemd[1]: Started Braille Device Support.
[ 4.857530] systemd[1]: Starting Load Kernel Modules...
[ 4.857695] systemd[1]: Listening on udev Control Socket.
[ 4.858870] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.858918] systemd[1]: Reached target Slices.
[ 4.859163] systemd[1]: Listening on Journal Audit Socket.
[ 4.860507] systemd[1]: Starting Journal Service...
[ 4.861903] systemd[1]: Starting Set console keymap...
[ 4.866390] systemd[1]: Started Read required files in advance.
[ 4.868673] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.870302] systemd[1]: Mounting Debug File System...
[ 4.872276] systemd[1]: Mounting Huge Pages File System...
[ 4.873878] systemd[1]: Starting Nameserver information manager...
[ 4.876423] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.876506] systemd[1]: Reached target Remote File Systems (Pre).
[ 4.876585] systemd[1]: Reached target Remote File Systems.
[ 4.876858] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[ 4.879549] systemd[1]: Reached target User and Group Name Lookups.
[ 4.884033] systemd[1]: Started Uncomplicated firewall.
[ 4.884651] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 4.899878] systemd[1]: Mounted Debug File System.
[ 4.900094] systemd[1]: Mounted POSIX Message Queue File System.
[ 4.900259] systemd[1]: Mounted Huge Pages File System.
[ 4.904478] lp: driver loaded but no devices found
[ 4.914450] ppdev: user-space parallel port driver
[ 4.914623] systemd[1]: Started Nameserver information manager.
[ 4.926502] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
[ 4.927216] systemd[1]: Failed to start Load Kernel Modules.
[ 4.927431] systemd[1]: systemd-modules-load.service: Unit entered failed state.
[ 4.927522] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
[ 4.996432] systemd[1]: Started Journal Service.
[ 5.132922] random: nonblocking pool is initialized
[ 5.188622] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 5.367304] systemd-journald[302]: Received request to flush runtime journal from PID 1
[ 5.544601] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.633575] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\_SB_.PCI0.LPC_.PMIO) (20150930/utaddress-254)
[ 5.633591] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.633600] ACPI Warning: SystemIO range 0x00000000000011C0-0x00000000000011CF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB_.PCI0.LPC_.LPIO) (20150930/utaddress-254)
[ 5.633609] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.633613] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB_.PCI0.LPC_.LPIO) (20150930/utaddress-254)
[ 5.633644] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.633649] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB_.PCI0.LPC_.LPIO) (20150930/utaddress-254)
[ 5.633658] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.633662] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.644022] Non-volatile memory driver v1.3
[ 5.681854] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 5.681862] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 5.681866] thinkpad_acpi: ThinkPad BIOS 6MET92WW (1.52 ), EC 6MHT46WW-1.21
[ 5.681870] thinkpad_acpi: Lenovo ThinkPad T510, model 4313CTO
[ 5.698042] thinkpad_acpi: detected a 16-level brightness capable ThinkPad
[ 5.698269] thinkpad_acpi: radio switch found; radios are enabled
[ 5.698555] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 5.698560] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 5.707669] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 5.717806] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 5.721989] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input11
[ 5.753746] snd_hda_codec_conexant hdaudioC0D0: CX20585: BIOS auto-probing.
[ 5.754280] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20585: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 5.754288] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.754296] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[ 5.754301] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 5.754305] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 5.754312] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23
[ 5.754318] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b
[ 5.754324] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a
[ 5.755839] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 5.764045] Bluetooth: Core ver 2.21
[ 5.764078] NET: Registered protocol family 31
[ 5.764083] Bluetooth: HCI device and connection manager initialized
[ 5.764092] Bluetooth: HCI socket layer initialized
[ 5.764098] Bluetooth: L2CAP socket layer initialized
[ 5.764111] Bluetooth: SCO socket layer initialized
[ 5.781574] media: Linux media interface: v0.10
[ 5.786963] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 5.787174] input: HDA Intel MID Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 5.787408] input: HDA Intel MID Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 5.787632] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 5.787797] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 5.787989] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 5.788176] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 5.820191] usbcore: registered new interface driver btusb
[ 5.830806] Linux video capture interface: v2.00
[ 5.867869] rtl8192se: FW Power Save off (module option)
[ 5.868040] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
Loading firmware rtlwifi/rtl8192sefw.bin
[ 5.895795] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 5.910401] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480f)
[ 5.923954] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input19
[ 5.924135] usbcore: registered new interface driver uvcvideo
[ 5.924140] USB Video Class driver (1.1.1)
[ 5.981409] SSE version of gcm_enc/dec engaged.
[ 6.140854] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 6.328335] cfg80211: World regulatory domain updated:
[ 6.328343] cfg80211: DFS Master region: unset
[ 6.328347] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6.328354] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.328360] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.328365] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.328371] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 6.328377] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 6.328381] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 6.328386] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.328391] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 6.446039] rtl8192se 0000:03:00.0 wlp3s0: renamed from wlan0
[ 6.681038] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
[ 7.369431] EXT4-fs (sda3): recovery complete
[ 7.369983] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 7.373637] EXT4-fs (sda2): recovery complete
[ 7.373646] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.539488] audit: type=1400 audit(1515975114.947:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=887 comm="apparmor_parser"
[ 7.539511] audit: type=1400 audit(1515975114.947:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=887 comm="apparmor_parser"
[ 7.539527] audit: type=1400 audit(1515975114.947:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=887 comm="apparmor_parser"
[ 7.539542] audit: type=1400 audit(1515975114.947:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=887 comm="apparmor_parser"
[ 7.542073] audit: type=1400 audit(1515975114.951:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3440/usr/lib/snapd/snap-confine" pid=888 comm="apparmor_parser"
[ 7.542093] audit: type=1400 audit(1515975114.951:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3440/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=888 comm="apparmor_parser"
[ 7.542111] audit: type=1400 audit(1515975114.951:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3440/usr/lib/snapd/snap-confine//snap_update_ns" pid=888 comm="apparmor_parser"
[ 7.545985] audit: type=1400 audit(1515975114.955:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=886 comm="apparmor_parser"
[ 7.546006] audit: type=1400 audit(1515975114.955:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=886 comm="apparmor_parser"
[ 7.547906] audit: type=1400 audit(1515975114.955:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3604/usr/lib/snapd/snap-confine" pid=889 comm="apparmor_parser"
[ 7.685602] Adding 4194300k swap on /media/usul/Data/swap/swap0. Priority:-1 extents:229 across:31096828k SSFS
[ 7.911953] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.911961] Bluetooth: BNEP filters: protocol multicast
[ 7.911971] Bluetooth: BNEP socket layer initialized
[ 8.315076] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 8.532440] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 8.656069] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input10
[ 8.683766] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 8.707245] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 8.921064] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 9.072036] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 14.332384] Guest personality initialized and is inactive
[ 14.332506] VMCI host device registered (name=vmci, major=10, minor=55)
[ 14.332511] Initialized host personality
[ 14.387561] NET: Registered protocol family 40
[ 15.360534] audit_printk_skb: 93 callbacks suppressed
[ 15.360541] audit: type=1400 audit(1515975122.767:43): apparmor="ALLOWED" operation="exec" profile="snap.anbox.container-manager" name="/sbin/xtables-multi" pid=1529 comm="anbox-bridge.sh" requested_mask="x" denied_mask="x" fsuid=0 ouid=0 target="snap.anbox.container-manager//null-/sbin/xtables-multi"
[ 15.367712] audit: type=1400 audit(1515975122.775:44): apparmor="ALLOWED" operation="file_inherit" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/dev/null" pid=1529 comm="iptables" requested_mask="w" denied_mask="w" fsuid=0 ouid=0
[ 15.369198] audit: type=1400 audit(1515975122.779:45): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/etc/ld.so.cache" pid=1529 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 15.370936] audit: type=1400 audit(1515975122.779:46): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libip4tc.so.0.1.0" pid=1529 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 15.379866] audit: type=1400 audit(1515975122.787:47): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libip6tc.so.0.1.0" pid=1529 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 15.380232] audit: type=1400 audit(1515975122.787:48): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libxtables.so.11.0.0" pid=1529 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 15.386084] audit: type=1400 audit(1515975122.795:49): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libc-2.23.so" pid=1529 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 15.386261] audit: type=1400 audit(1515975122.795:50): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libdl-2.23.so" pid=1529 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 15.386584] audit: type=1400 audit(1515975122.795:51): apparmor="ALLOWED" operation="file_mprotect" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/sbin/xtables-multi" pid=1529 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 15.386632] audit: type=1400 audit(1515975122.795:52): apparmor="ALLOWED" operation="file_mprotect" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/ld-2.23.so" pid=1529 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 15.425400] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.491174] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 15.561445] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 19.602007] wlp3s0: authenticate with c0:25:06:44:0e:0e
[ 19.621108] wlp3s0: send auth to c0:25:06:44:0e:0e (try 1/3)
[ 19.624616] wlp3s0: authenticated
[ 19.633000] wlp3s0: associate with c0:25:06:44:0e:0e (try 1/3)
[ 19.650997] wlp3s0: RX AssocResp from c0:25:06:44:0e:0e (capab=0x431 status=0 aid=1)
[ 19.652518] wlp3s0: associated
[ 19.652596] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 19.660259] cfg80211: Regulatory domain changed to country: DE
[ 19.660266] cfg80211: DFS Master region: ETSI
[ 19.660268] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 19.660273] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 19.660277] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 19.660282] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 19.660285] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[ 19.660288] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 473.098712] perf interrupt took too long (2520 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 1575.260131] perf interrupt took too long (5004 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[13222.493690] wlp3s0: deauthenticating from c0:25:06:44:0e:0e by local choice (Reason: 3=DEAUTH_LEAVING)
[13222.563729] cfg80211: World regulatory domain updated:
[13222.563736] cfg80211: DFS Master region: unset
[13222.563738] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[13222.563743] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[13222.563747] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[13222.563750] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[13222.563754] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[13222.563758] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[13222.563762] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[13222.563765] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[13222.563768] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[13232.691111] PM: Syncing filesystems ... done.
[13232.705305] PM: Preparing system for sleep (mem)
[13232.706327] Freezing user space processes ... (elapsed 0.002 seconds) done.
[13232.708703] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[13232.710018] PM: Suspending system (mem)
[13232.710041] Suspending console(s) (use no_console_suspend to debug)
[13232.897305] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[13232.898008] sd 0:0:0:0: [sda] Stopping disk
[13232.957671] e1000e: EEE TX LPI TIMER: 00000000
[13233.001498] PM: suspend of devices complete after 291.188 msecs
[13233.014536] PM: late suspend of devices complete after 13.033 msecs
[13233.018956] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[13233.019108] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[13233.019234] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[13233.034601] PM: noirq suspend of devices complete after 20.060 msecs
[13233.034813] ACPI: Preparing to enter system sleep state S3
[13233.214411] ACPI : EC: EC stopped
[13233.214412] PM: Saving platform NVS memory
[13233.214421] Disabling non-boot CPUs ...
[13233.214846] Broke affinity for irq 19
[13233.215888] smpboot: CPU 1 is now offline
[13233.227479] Broke affinity for irq 19
[13233.227490] Broke affinity for irq 24
[13233.228530] smpboot: CPU 2 is now offline
[13233.239303] Broke affinity for irq 1
[13233.239313] Broke affinity for irq 9
[13233.239319] Broke affinity for irq 12
[13233.239325] Broke affinity for irq 17
[13233.239331] Broke affinity for irq 19
[13233.239336] Broke affinity for irq 23
[13233.239340] Broke affinity for irq 24
[13233.239342] Broke affinity for irq 26
[13233.240384] smpboot: CPU 3 is now offline
[13233.255764] ACPI: Low-level resume complete
[13233.255818] ACPI : EC: EC started
[13233.255819] PM: Restoring platform NVS memory
[13233.256506] microcode: CPU0 microcode updated early to revision 0xe, date = 2013-06-26
[13233.256538] Enabling non-boot CPUs ...
[13233.275707] x86: Booting SMP configuration:
[13233.275708] smpboot: Booting Node 0 Processor 1 APIC 0x1
[13233.315634] cache: parent cpu1 should not be sleeping
[13233.355582] CPU1 is up
[13233.375726] smpboot: Booting Node 0 Processor 2 APIC 0x4
[13233.376122] microcode: CPU2 microcode updated early to revision 0xe, date = 2013-06-26
[13233.415632] cache: parent cpu2 should not be sleeping
[13233.455580] CPU2 is up
[13233.475758] smpboot: Booting Node 0 Processor 3 APIC 0x5
[13233.515635] cache: parent cpu3 should not be sleeping
[13233.555589] CPU3 is up
[13233.557790] ACPI: Waking up from system sleep state S3
[13233.899992] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[13233.900044] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[13233.900151] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[13233.900318] PM: noirq resume of devices complete after 16.782 msecs
[13233.902405] PM: early resume of devices complete after 2.066 msecs
[13233.902445] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[13233.903232] rtc_cmos 00:02: System wakeup disabled by ACPI
[13233.905734] sd 0:0:0:0: [sda] Starting disk
[13234.131562] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[13234.219606] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[13234.220649] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[13234.220656] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[13234.220657] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[13234.221593] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[13234.221597] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[13234.221602] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[13234.222107] ata1.00: configured for UDMA/133
[13234.227587] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[13234.230002] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[13234.230213] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[13234.234247] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[13234.234473] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[13234.235997] ata2.00: configured for UDMA/66
[13234.239644] ata5: SATA link down (SStatus 0 SControl 300)
[13234.243590] ata6: SATA link down (SStatus 0 SControl 300)
[13234.295588] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[13234.403608] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[13234.406115] PM: resume of devices complete after 503.702 msecs
[13234.406893] PM: Finishing wakeup.
[13234.406896] Restarting tasks ... done.
[13234.455582] firewire_core 0000:0d:00.3: rediscovered device fw0
[13234.615709] e1000e: enp0s25 NIC Link is Down
[13234.620508] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[13234.673093] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[13234.771663] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[13234.774104] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[13234.987831] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[13235.052416] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[13236.910241] wlp3s0: authenticate with c0:25:06:44:0e:0e
[13236.927785] wlp3s0: send auth to c0:25:06:44:0e:0e (try 1/3)
[13236.931917] wlp3s0: authenticated
[13236.935850] wlp3s0: associate with c0:25:06:44:0e:0e (try 1/3)
[13236.943955] wlp3s0: RX AssocResp from c0:25:06:44:0e:0e (capab=0x431 status=0 aid=5)
[13236.945760] wlp3s0: associated
[13236.946912] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[13236.969903] cfg80211: Regulatory domain changed to country: DE
[13236.969912] cfg80211: DFS Master region: ETSI
[13236.969916] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[13236.969923] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[13236.969929] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[13236.969935] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[13236.969940] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[13236.969945] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 8.435]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 8.436] X Protocol Version 11, Revision 0
[ 8.436] Build Operating System: Linux 4.4.0-97-generic x86_64 Ubuntu
[ 8.436] Current Operating System: Linux usul-T510 4.4.0-98-generic #121-Ubuntu SMP Tue Oct 10 14:24:03 UTC 2017 x86_64
[ 8.436] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-98-generic root=UUID=89e308b2-e5ca-485c-bb0f-7784c58bfcc0 ro quiet splash vt.handoff=7
[ 8.436] Build Date: 13 October 2017 01:57:05PM
[ 8.436] xorg-server 2:1.18.4-0ubuntu0.7 (For technical support please see http://www.ubuntu.com/support)
[ 8.436] Current version of pixman: 0.33.6
[ 8.436] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 8.436] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 8.436] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 15 01:11:56 2018
[ 8.437] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 8.438] (==) No Layout section. Using the first Screen section.
[ 8.438] (==) No screen section available. Using defaults.
[ 8.438] (**) |-->Screen "Default Screen Section" (0)
[ 8.438] (**) | |-->Monitor "<default monitor>"
[ 8.440] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 8.440] (==) Automatically adding devices
[ 8.440] (==) Automatically enabling devices
[ 8.440] (==) Automatically adding GPU devices
[ 8.440] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 8.440] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 8.440] Entry deleted from font path.
[ 8.440] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 8.440] Entry deleted from font path.
[ 8.440] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 8.440] Entry deleted from font path.
[ 8.440] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 8.440] Entry deleted from font path.
[ 8.440] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 8.440] Entry deleted from font path.
[ 8.440] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 8.440] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 8.440] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 8.440] (II) Loader magic: 0x559703be9dc0
[ 8.440] (II) Module ABI versions:
[ 8.440] X.Org ANSI C Emulation: 0.4
[ 8.440] X.Org Video Driver: 20.0
[ 8.441] X.Org XInput driver : 22.1
[ 8.441] X.Org Server Extension : 9.0
[ 8.444] (++) using VT number 7
[ 8.444] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 8.445] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 8.449] (--) PCI:*(0:0:2:0) 8086:0046:17aa:215a rev 2, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 8.449] (II) LoadModule: "glx"
[ 8.455] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 8.497] (II) Module glx: vendor="X.Org Foundation"
[ 8.497] compiled for 1.18.4, module version = 1.0.0
[ 8.497] ABI class: X.Org Server Extension, version 9.0
[ 8.497] (==) AIGLX enabled
[ 8.497] (==) Matched intel as autoconfigured driver 0
[ 8.497] (==) Matched intel as autoconfigured driver 1
[ 8.497] (==) Matched modesetting as autoconfigured driver 2
[ 8.497] (==) Matched fbdev as autoconfigured driver 3
[ 8.497] (==) Matched vesa as autoconfigured driver 4
[ 8.497] (==) Assigned the driver to the xf86ConfigLayout
[ 8.497] (II) LoadModule: "intel"
[ 8.497] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 8.500] (II) Module intel: vendor="X.Org Foundation"
[ 8.500] compiled for 1.18.4, module version = 2.99.917
[ 8.500] Module class: X.Org Video Driver
[ 8.500] ABI class: X.Org Video Driver, version 20.0
[ 8.501] (II) LoadModule: "modesetting"
[ 8.501] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 8.501] (II) Module modesetting: vendor="X.Org Foundation"
[ 8.501] compiled for 1.18.4, module version = 1.18.4
[ 8.501] Module class: X.Org Video Driver
[ 8.501] ABI class: X.Org Video Driver, version 20.0
[ 8.501] (II) LoadModule: "fbdev"
[ 8.502] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 8.502] (II) Module fbdev: vendor="X.Org Foundation"
[ 8.502] compiled for 1.18.1, module version = 0.4.4
[ 8.502] Module class: X.Org Video Driver
[ 8.502] ABI class: X.Org Video Driver, version 20.0
[ 8.502] (II) LoadModule: "vesa"
[ 8.502] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 8.502] (II) Module vesa: vendor="X.Org Foundation"
[ 8.502] compiled for 1.18.1, module version = 2.3.4
[ 8.502] Module class: X.Org Video Driver
[ 8.502] ABI class: X.Org Video Driver, version 20.0
[ 8.502] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 8.503] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 8.503] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 8.503] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 8.503] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 8.503] (II) FBDEV: driver for framebuffer: fbdev
[ 8.503] (II) VESA: driver for VESA chipsets: vesa
[ 8.505] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010
[ 8.505] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1.2 (Timo Aaltonen <tjaalton@debian.org>)
[ 8.505] (II) intel(0): SNA compiled for use with valgrind
[ 8.506] (WW) Falling back to old probe method for modesetting
[ 8.506] (WW) Falling back to old probe method for fbdev
[ 8.506] (II) Loading sub module "fbdevhw"
[ 8.506] (II) LoadModule: "fbdevhw"
[ 8.507] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 8.507] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 8.507] compiled for 1.18.4, module version = 0.0.2
[ 8.507] ABI class: X.Org Video Driver, version 20.0
[ 8.507] (WW) Falling back to old probe method for vesa
[ 8.508] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 8.508] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2; using a maximum of 2 threads
[ 8.508] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 8.508] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 8.509] (==) intel(0): RGB weight 888
[ 8.509] (==) intel(0): Default visual is TrueColor
[ 8.510] (II) intel(0): Output LVDS1 has no monitor section
[ 8.524] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[ 8.524] (II) intel(0): Enabled output LVDS1
[ 8.524] (II) intel(0): Output VGA1 has no monitor section
[ 8.524] (II) intel(0): Enabled output VGA1
[ 8.524] (II) intel(0): Output HDMI1 has no monitor section
[ 8.524] (II) intel(0): Enabled output HDMI1
[ 8.524] (II) intel(0): Output DP1 has no monitor section
[ 8.524] (II) intel(0): Enabled output DP1
[ 8.524] (II) intel(0): Output HDMI2 has no monitor section
[ 8.524] (II) intel(0): Enabled output HDMI2
[ 8.524] (II) intel(0): Output HDMI3 has no monitor section
[ 8.524] (II) intel(0): Enabled output HDMI3
[ 8.524] (II) intel(0): Output DP2 has no monitor section
[ 8.524] (II) intel(0): Enabled output DP2
[ 8.524] (II) intel(0): Output DP3 has no monitor section
[ 8.524] (II) intel(0): Enabled output DP3
[ 8.524] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 8.524] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 8.524] (II) intel(0): Enabled output VIRTUAL1
[ 8.525] (--) intel(0): Output LVDS1 using initial mode 1600x900 on pipe 0
[ 8.525] (--) intel(0): Output HDMI1 using initial mode 2560x1080 on pipe 1
[ 8.525] (==) intel(0): TearFree disabled
[ 8.525] (==) intel(0): DPI set to (96, 96)
[ 8.525] (II) Loading sub module "dri2"
[ 8.525] (II) LoadModule: "dri2"
[ 8.525] (II) Module "dri2" already built-in
[ 8.525] (II) Loading sub module "present"
[ 8.525] (II) LoadModule: "present"
[ 8.525] (II) Module "present" already built-in
[ 8.526] (II) UnloadModule: "modesetting"
[ 8.526] (II) Unloading modesetting
[ 8.526] (II) UnloadModule: "fbdev"
[ 8.526] (II) Unloading fbdev
[ 8.526] (II) UnloadSubModule: "fbdevhw"
[ 8.526] (II) Unloading fbdevhw
[ 8.526] (II) UnloadModule: "vesa"
[ 8.526] (II) Unloading vesa
[ 8.526] (==) Depth 24 pixmap format is 32 bpp
[ 8.532] (II) intel(0): SNA initialized with Ironlake (gen5) backend
[ 8.532] (==) intel(0): Backing store enabled
[ 8.532] (==) intel(0): Silken mouse enabled
[ 8.533] (II) intel(0): HW Cursor enabled
[ 8.533] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 8.534] (==) intel(0): DPMS enabled
[ 8.535] (==) intel(0): Display hotplug detection enabled
[ 8.535] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 8.535] (II) intel(0): [DRI2] Setup complete
[ 8.535] (II) intel(0): [DRI2] DRI driver: i965
[ 8.535] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 8.535] (II) intel(0): direct rendering: DRI2 enabled
[ 8.535] (II) intel(0): hardware support for Present enabled
[ 8.535] (--) RandR disabled
[ 8.548] (II) SELinux: Disabled on system
[ 8.605] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 8.605] (II) AIGLX: enabled GLX_ARB_create_context
[ 8.605] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 8.605] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 8.605] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 8.605] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 8.605] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 8.605] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 8.605] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 8.605] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 8.605] (II) AIGLX: Loaded and initialized i965
[ 8.605] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 8.628] (II) intel(0): switch to mode 1600x900@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 8.628] (II) intel(0): switch to mode 2560x1080@60.0 on HDMI1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 8.629] (II) intel(0): Setting screen physical size to 677 x 285
[ 8.716] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 8.716] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 8.716] (II) LoadModule: "evdev"
[ 8.716] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 8.719] (II) Module evdev: vendor="X.Org Foundation"
[ 8.719] compiled for 1.18.1, module version = 2.10.1
[ 8.719] Module class: X.Org XInput Driver
[ 8.719] ABI class: X.Org XInput driver, version 22.1
[ 8.719] (II) Using input driver 'evdev' for 'Power Button'
[ 8.719] (**) Power Button: always reports core events
[ 8.719] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 8.719] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 8.719] (--) evdev: Power Button: Found keys
[ 8.719] (II) evdev: Power Button: Configuring as keyboard
[ 8.719] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 8.719] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 8.719] (**) Option "xkb_rules" "evdev"
[ 8.719] (**) Option "xkb_model" "pc105"
[ 8.719] (**) Option "xkb_layout" "us"
[ 8.720] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 8.720] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 8.720] (II) Using input driver 'evdev' for 'Video Bus'
[ 8.720] (**) Video Bus: always reports core events
[ 8.720] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 8.721] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 8.721] (--) evdev: Video Bus: Found keys
[ 8.721] (II) evdev: Video Bus: Configuring as keyboard
[ 8.721] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event4"
[ 8.721] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 8.721] (**) Option "xkb_rules" "evdev"
[ 8.721] (**) Option "xkb_model" "pc105"
[ 8.721] (**) Option "xkb_layout" "us"
[ 8.722] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 8.722] (II) No input driver specified, ignoring this device.
[ 8.722] (II) This device may have been added with another device file.
[ 8.722] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 8.722] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 8.722] (II) Using input driver 'evdev' for 'Sleep Button'
[ 8.722] (**) Sleep Button: always reports core events
[ 8.722] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 8.722] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 8.722] (--) evdev: Sleep Button: Found keys
[ 8.722] (II) evdev: Sleep Button: Configuring as keyboard
[ 8.722] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 8.722] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 8.722] (**) Option "xkb_rules" "evdev"
[ 8.722] (**) Option "xkb_model" "pc105"
[ 8.722] (**) Option "xkb_layout" "us"
[ 8.725] (II) config/udev: Adding input device Integrated Camera (/dev/input/event17)
[ 8.725] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 8.725] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 8.725] (**) Integrated Camera: always reports core events
[ 8.725] (**) evdev: Integrated Camera: Device: "/dev/input/event17"
[ 8.725] (--) evdev: Integrated Camera: Vendor 0x17ef Product 0x480f
[ 8.725] (--) evdev: Integrated Camera: Found keys
[ 8.725] (II) evdev: Integrated Camera: Configuring as keyboard
[ 8.725] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input19/event17"
[ 8.725] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 9)
[ 8.725] (**) Option "xkb_rules" "evdev"
[ 8.725] (**) Option "xkb_model" "pc105"
[ 8.725] (**) Option "xkb_layout" "us"
[ 8.726] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event10)
[ 8.726] (II) No input driver specified, ignoring this device.
[ 8.726] (II) This device may have been added with another device file.
[ 8.726] (II) config/udev: Adding input device HDA Intel MID Dock Mic (/dev/input/event11)
[ 8.727] (II) No input driver specified, ignoring this device.
[ 8.727] (II) This device may have been added with another device file.
[ 8.727] (II) config/udev: Adding input device HDA Intel MID Dock Headphone (/dev/input/event12)
[ 8.727] (II) No input driver specified, ignoring this device.
[ 8.727] (II) This device may have been added with another device file.
[ 8.728] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event13)
[ 8.728] (II) No input driver specified, ignoring this device.
[ 8.728] (II) This device may have been added with another device file.
[ 8.728] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event14)
[ 8.729] (II) No input driver specified, ignoring this device.
[ 8.729] (II) This device may have been added with another device file.
[ 8.729] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=7 (/dev/input/event15)
[ 8.730] (II) No input driver specified, ignoring this device.
[ 8.730] (II) This device may have been added with another device file.
[ 8.730] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=8 (/dev/input/event16)
[ 8.730] (II) No input driver specified, ignoring this device.
[ 8.730] (II) This device may have been added with another device file.
[ 8.732] (II) config/udev: Adding input device Chicony IBM Preferred Pro USB Fingerprint Keyboard (/dev/input/event7)
[ 8.732] (**) Chicony IBM Preferred Pro USB Fingerprint Keyboard: Applying InputClass "evdev keyboard catchall"
[ 8.732] (II) Using input driver 'evdev' for 'Chicony IBM Preferred Pro USB Fingerprint Keyboard'
[ 8.732] (**) Chicony IBM Preferred Pro USB Fingerprint Keyboard: always reports core events
[ 8.732] (**) evdev: Chicony IBM Preferred Pro USB Fingerprint Keyboard: Device: "/dev/input/event7"
[ 8.732] (--) evdev: Chicony IBM Preferred Pro USB Fingerprint Keyboard: Vendor 0x4b3 Product 0x3021
[ 8.732] (--) evdev: Chicony IBM Preferred Pro USB Fingerprint Keyboard: Found keys
[ 8.732] (II) evdev: Chicony IBM Preferred Pro USB Fingerprint Keyboard: Configuring as keyboard
[ 8.732] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.0/0003:04B3:3021.0003/input/input9/event7"
[ 8.733] (II) XINPUT: Adding extended input device "Chicony IBM Preferred Pro USB Fingerprint Keyboard" (type: KEYBOARD, id 10)
[ 8.733] (**) Option "xkb_rules" "evdev"
[ 8.733] (**) Option "xkb_model" "pc105"
[ 8.733] (**) Option "xkb_layout" "us"
[ 8.735] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
[ 8.735] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 8.735] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 8.735] (**) Logitech USB Receiver: always reports core events
[ 8.735] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event5"
[ 8.788] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 8.788] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 8.788] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 8.788] (--) evdev: Logitech USB Receiver: Found relative axes
[ 8.788] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 8.788] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 8.788] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 8.788] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 8.788] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 8.788] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C52F.0001/input/input7/event5"
[ 8.788] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 11)
[ 8.788] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 8.789] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 8.789] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 8.789] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 8.789] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 8.790] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 8.790] (II) No input driver specified, ignoring this device.
[ 8.790] (II) This device may have been added with another device file.
[ 8.791] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6)
[ 8.791] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 8.791] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 8.791] (**) Logitech USB Receiver: always reports core events
[ 8.791] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event6"
[ 8.791] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 8.791] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 8.791] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 8.791] (--) evdev: Logitech USB Receiver: Found relative axes
[ 8.791] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 8.791] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 8.791] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 8.791] (--) evdev: Logitech USB Receiver: Found keys
[ 8.791] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 8.791] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 8.791] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 8.791] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 8.791] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 8.791] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:046D:C52F.0002/input/input8/event6"
[ 8.791] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 12)
[ 8.791] (**) Option "xkb_rules" "evdev"
[ 8.791] (**) Option "xkb_model" "pc105"
[ 8.791] (**) Option "xkb_layout" "us"
[ 8.792] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 8.792] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 8.792] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 8.792] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 8.792] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 8.792] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 8.793] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 8.793] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 8.793] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 8.793] (**) AT Translated Set 2 keyboard: always reports core events
[ 8.793] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 8.793] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 8.793] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 8.793] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 8.793] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 8.793] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 8.793] (**) Option "xkb_rules" "evdev"
[ 8.793] (**) Option "xkb_model" "pc105"
[ 8.793] (**) Option "xkb_layout" "us"
[ 8.794] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 8.794] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 8.794] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall"
[ 8.794] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 8.794] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 8.794] (II) LoadModule: "synaptics"
[ 8.795] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 8.795] (II) Module synaptics: vendor="X.Org Foundation"
[ 8.795] compiled for 1.18.1, module version = 1.8.2
[ 8.795] Module class: X.Org XInput Driver
[ 8.795] ABI class: X.Org XInput driver, version 22.1
[ 8.795] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 8.795] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 8.795] (**) Option "Device" "/dev/input/event8"
[ 9.028] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 9.028] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 778 - 6239 (res 72)
[ 9.028] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 841 - 5330 (res 100)
[ 9.028] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 9.028] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 9.028] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 9.028] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 9.028] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 9.028] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 9.068] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event8"
[ 9.068] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 9.068] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 9.068] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 9.068] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.028
[ 9.068] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 9.068] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 9.068] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 9.068] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 9.068] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 9.069] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 9.069] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 9.070] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event18)
[ 9.070] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 9.070] (**) TPPS/2 IBM TrackPoint: Applying InputClass "trackpoint catchall"
[ 9.070] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 9.070] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 9.070] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event18"
[ 9.070] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 9.070] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 9.070] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 9.070] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 9.070] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 9.070] (**) Option "Emulate3Buttons" "true"
[ 9.070] (**) Option "EmulateWheel" "true"
[ 9.070] (**) Option "EmulateWheelButton" "2"
[ 9.070] (**) Option "YAxisMapping" "4 5"
[ 9.070] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 9.070] (**) Option "XAxisMapping" "6 7"
[ 9.070] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
[ 9.070] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 9.070] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input10/event18"
[ 9.070] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 15)
[ 9.070] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 9.071] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 9.071] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 9.071] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 9.071] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 9.071] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2)
[ 9.071] (II) No input driver specified, ignoring this device.
[ 9.071] (II) This device may have been added with another device file.
[ 9.075] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event9)
[ 9.075] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 9.075] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 9.075] (**) ThinkPad Extra Buttons: always reports core events
[ 9.075] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event9"
[ 9.075] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 9.075] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 9.075] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 9.075] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input11/event9"
[ 9.075] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 16)
[ 9.075] (**) Option "xkb_rules" "evdev"
[ 9.076] (**) Option "xkb_model" "pc105"
[ 9.076] (**) Option "xkb_layout" "us"
[ 9.108] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2)
[ 9.108] (II) No input driver specified, ignoring this device.
[ 9.108] (II) This device may have been added with another device file.
[ 9.109] (WW) config/udev: device TPPS/2 IBM TrackPoint already added. Ignoring.
[ 10.526] (II) intel(0): EDID vendor "LEN", prod id 16561
[ 10.526] (II) intel(0): Printing DDC gathered Modelines:
[ 10.526] (II) intel(0): Modeline "1600x900"x0.0 108.50 1600 1648 1680 1920 900 903 908 942 -hsync -vsync (56.5 kHz eP)
[ 10.526] (II) intel(0): Modeline "1600x900"x0.0 90.43 1600 1648 1680 1920 900 903 908 942 -hsync -vsync (47.1 kHz e)
[ 13222.988] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 14126.575] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 14126.576] (II) intel(0): switch to mode 2560x1080@60.0 on HDMI1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 14126.760] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
|
Neko486
Anmeldungsdatum: 24. März 2017
Beiträge: 21
|
sirbender schrieb: Hallo, vielen Dank fuer eure Hilfe! Ich bin uebrigens im Moment mit dem 4.4.0-98 Kernel unterwegs wo alles funktioniert. Helfen da die dmesg und .log Ausgaben da ueberhaupt oder sollte ich in einen Kernel booten wo Wifi und der externe Monitor nicht funktioniert und dann ein dmesg machen? [ 0.000000] microcode: CPU0 microcode updated early to revision 0xe, date = 2013-06-26
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-98-generic (buildd@lcy01-03) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #121-Ubuntu SMP Tue Oct 10 14:24:03 UTC 2017 (Ubuntu 4.4.0-98.121-generic 4.4.90)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-98-generic root=UUID=89e308b2-e5ca-485c-bb0f-7784c58bfcc0 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb27bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb27c000-0x00000000bb281fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb282000-0x00000000bb35efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb35f000-0x00000000bb370fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb371000-0x00000000bb3f1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb3f2000-0x00000000bb40efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb40f000-0x00000000bb46efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb46f000-0x00000000bb667fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb668000-0x00000000bb6e7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb6e8000-0x00000000bb70efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb70f000-0x00000000bb716fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb717000-0x00000000bb71efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb71f000-0x00000000bb76afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb76b000-0x00000000bb776fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb777000-0x00000000bb779fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb77a000-0x00000000bb780fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb781000-0x00000000bb781fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb782000-0x00000000bb78afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb78b000-0x00000000bb78bfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb78c000-0x00000000bb79efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb79f000-0x00000000bb7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb7ff000-0x00000000bb7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017bffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000180000000-0x00000001bbffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: LENOVO 4313CTO/4313CTO, BIOS 6MET92WW (1.52 ) 09/26/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1bc000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask F80000000 write-back
[ 0.000000] 4 base 180000000 mask FC0000000 write-back
[ 0.000000] 5 base 1BC000000 mask FFC000000 uncachable
[ 0.000000] 6 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 1, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 2, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 3, base: 4GB, range: 2GB, type WB
[ 0.000000] reg 4, base: 6GB, range: 1GB, type WB
[ 0.000000] reg 5, base: 7104MB, range: 64MB, type UC
[ 0.000000] reg 6, base: 3008MB, range: 64MB, type UC
[ 0.000000] total RAM covered: 6016M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 6 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3008MB, range: 64MB, type UC
[ 0.000000] reg 3, base: 4GB, range: 2GB, type WB
[ 0.000000] reg 4, base: 6GB, range: 1GB, type WB
[ 0.000000] reg 5, base: 7104MB, range: 64MB, type UC
[ 0.000000] e820: update [mem 0xbc000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbb800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f6890-0x000f689f] mapped at [ffff8800000f6890]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] BRK [0x0220d000, 0x0220dfff] PGTABLE
[ 0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE
[ 0.000000] BRK [0x0220f000, 0x0220ffff] PGTABLE
[ 0.000000] BRK [0x02210000, 0x02210fff] PGTABLE
[ 0.000000] BRK [0x02211000, 0x02211fff] PGTABLE
[ 0.000000] BRK [0x02212000, 0x02212fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33648000-0x35b1bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6850 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x00000000BB7EF0C6 00009C (v01 LENOVO TP-6M 00001520 LTP 00000000)
[ 0.000000] ACPI: FACP 0x00000000BB7EF200 0000F4 (v04 LENOVO TP-6M 00001520 LNVO 00000001)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20150930/tbfadt-623)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20150930/tbfadt-704)
[ 0.000000] ACPI: DSDT 0x00000000BB7EF5D1 00F56A (v01 LENOVO TP-6M 00001520 MSFT 03000001)
[ 0.000000] ACPI: FACS 0x00000000BB6E7000 000040
[ 0.000000] ACPI: FACS 0x00000000BB6E7000 000040
[ 0.000000] ACPI: SSDT 0x00000000BB7EF3B4 00021D (v01 LENOVO TP-6M 00001520 MSFT 03000001)
[ 0.000000] ACPI: ECDT 0x00000000BB7FEB3B 000052 (v01 LENOVO TP-6M 00001520 LNVO 00000001)
[ 0.000000] ACPI: APIC 0x00000000BB7FEB8D 000084 (v01 LENOVO TP-6M 00001520 LNVO 00000001)
[ 0.000000] ACPI: MCFG 0x00000000BB7FEC49 00003C (v01 LENOVO TP-6M 00001520 LNVO 00000001)
[ 0.000000] ACPI: HPET 0x00000000BB7FEC85 000038 (v01 LENOVO TP-6M 00001520 LNVO 00000001)
[ 0.000000] ACPI: ASF! 0x00000000BB7FEDBE 0000A4 (v16 LENOVO TP-6M 00001520 PTL 00000001)
[ 0.000000] ACPI: SLIC 0x00000000BB7FEE62 000176 (v01 LENOVO TP-6M 00001520 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x00000000BB7FEFD8 000028 (v01 LENOVO TP-6M 00001520 LTP 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BB6E591A 00084B (v01 LENOVO TP-6M 00001520 INTL 20050513)
[ 0.000000] ACPI: TCPA 0x00000000BB78B000 000032 (v02 PTL CRESTLN 06040000 00005A52)
[ 0.000000] ACPI: DMAR 0x00000000BB781000 0000B8 (v01 INTEL CP_DALE 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BB779000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 0x00000000BB778000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 0x00000000BB777000 00049F (v01 PmRef ApTst 00003000 INTL 20060912)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001bbffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1bbff6000-0x1bbffafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001bbffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bb27bfff]
[ 0.000000] node 0: [mem 0x00000000bb282000-0x00000000bb35efff]
[ 0.000000] node 0: [mem 0x00000000bb40f000-0x00000000bb46efff]
[ 0.000000] node 0: [mem 0x00000000bb70f000-0x00000000bb716fff]
[ 0.000000] node 0: [mem 0x00000000bb71f000-0x00000000bb76afff]
[ 0.000000] node 0: [mem 0x00000000bb7ff000-0x00000000bb7fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000017bffffff]
[ 0.000000] node 0: [mem 0x0000000180000000-0x00000001bbffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bbffffff]
[ 0.000000] On node 0 totalpages: 1520555
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11921 pages used for memmap
[ 0.000000] DMA32 zone: 762894 pages, LIFO batch:31
[ 0.000000] Normal zone: 12032 pages used for memmap
[ 0.000000] Normal zone: 753664 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xbe000000-0xbfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb27c000-0xbb281fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb35f000-0xbb370fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb371000-0xbb3f1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb3f2000-0xbb40efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb46f000-0xbb667fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb668000-0xbb6e7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb6e8000-0xbb70efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb717000-0xbb71efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb76b000-0xbb776fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb777000-0xbb779fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb77a000-0xbb780fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb781000-0xbb781fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb782000-0xbb78afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb78b000-0xbb78bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb78c000-0xbb79efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb79f000-0xbb7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb800000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x17c000000-0x17fffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 34 pages/cpu @ffff8801bbc00000 s98328 r8192 d32744 u524288
[ 0.000000] pcpu-alloc: s98328 r8192 d32744 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1496517
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-98-generic root=UUID=89e308b2-e5ca-485c-bb0f-7784c58bfcc0 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5860720K/6082220K available (8484K kernel code, 1294K rwdata, 3988K rodata, 1492K init, 1316K bss, 221500K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2393.954 MHz processor
[ 0.000032] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.90 BogoMIPS (lpj=9575816)
[ 0.000035] pid_max: default: 32768 minimum: 301
[ 0.000042] ACPI: Core revision 20150930
[ 0.014150] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.014173] Security Framework initialized
[ 0.014176] Yama: becoming mindful.
[ 0.014196] AppArmor: AppArmor initialized
[ 0.014697] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.016903] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.018004] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.018016] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.018308] Initializing cgroup subsys io
[ 0.018314] Initializing cgroup subsys memory
[ 0.018321] Initializing cgroup subsys devices
[ 0.018324] Initializing cgroup subsys freezer
[ 0.018327] Initializing cgroup subsys net_cls
[ 0.018329] Initializing cgroup subsys perf_event
[ 0.018331] Initializing cgroup subsys net_prio
[ 0.018336] Initializing cgroup subsys hugetlb
[ 0.018337] Initializing cgroup subsys pids
[ 0.018357] CPU: Physical Processor ID: 0
[ 0.018358] CPU: Processor Core ID: 0
[ 0.018365] mce: CPU supports 9 MCE banks
[ 0.018375] CPU0: Thermal monitoring enabled (TM1)
[ 0.018382] process: using mwait in idle threads
[ 0.018386] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.018387] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.018709] Freeing SMP alternatives memory: 32K
[ 0.039208] ftrace: allocating 32154 entries in 126 pages
[ 0.054173] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.054177] smpboot: Max logical packages: 2
[ 0.054195] DMAR: Host address width 36
[ 0.054197] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.054204] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
[ 0.054205] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[ 0.054210] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c0000020230272 ecap 1000
[ 0.054211] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[ 0.054215] DMAR: dmar2: reg_base_addr fed93000 ver 1:0 cap c9008020630272 ecap 1000
[ 0.054216] DMAR: RMRR base: 0x000000bb6e9000 end: 0x000000bb6fffff
[ 0.054218] DMAR: RMRR base: 0x000000bdc00000 end: 0x000000bfffffff
[ 0.054718] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.201715] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz (family: 0x6, model: 0x25, stepping: 0x2)
[ 0.201734] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.201752] core: CPUID marked event: 'bus cycles' unavailable
[ 0.201755] ... version: 3
[ 0.201755] ... bit width: 48
[ 0.201756] ... generic registers: 4
[ 0.201757] ... value mask: 0000ffffffffffff
[ 0.201758] ... max period: 000000007fffffff
[ 0.201759] ... fixed-purpose events: 3
[ 0.201760] ... event mask: 000000070000000f
[ 0.202596] x86: Booting SMP configuration:
[ 0.202598] .... node #0, CPUs: #1
[ 0.205107] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.205214] #2
[ 0.205661] microcode: CPU2 microcode updated early to revision 0xe, date = 2013-06-26
[ 0.207866] #3
[ 0.210090] x86: Booted up 1 node, 4 CPUs
[ 0.210095] smpboot: Total of 4 processors activated (19151.63 BogoMIPS)
[ 0.212543] devtmpfs: initialized
[ 0.215048] evm: security.selinux
[ 0.215049] evm: security.SMACK64
[ 0.215050] evm: security.SMACK64EXEC
[ 0.215051] evm: security.SMACK64TRANSMUTE
[ 0.215052] evm: security.SMACK64MMAP
[ 0.215053] evm: security.ima
[ 0.215054] evm: security.capability
[ 0.215130] PM: Registering ACPI NVS region [mem 0xbb371000-0xbb3f1fff] (528384 bytes)
[ 0.215139] PM: Registering ACPI NVS region [mem 0xbb668000-0xbb6e7fff] (524288 bytes)
[ 0.215147] PM: Registering ACPI NVS region [mem 0xbb76b000-0xbb776fff] (49152 bytes)
[ 0.215148] PM: Registering ACPI NVS region [mem 0xbb77a000-0xbb780fff] (28672 bytes)
[ 0.215150] PM: Registering ACPI NVS region [mem 0xbb782000-0xbb78afff] (36864 bytes)
[ 0.215151] PM: Registering ACPI NVS region [mem 0xbb78c000-0xbb79efff] (77824 bytes)
[ 0.215235] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.215249] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.215347] pinctrl core: initialized pinctrl subsystem
[ 0.215473] RTC time: 0:11:47, date: 01/15/18
[ 0.215588] NET: Registered protocol family 16
[ 0.225726] cpuidle: using governor ladder
[ 0.237721] cpuidle: using governor menu
[ 0.237728] PCCT header not found.
[ 0.237814] Simple Boot Flag at 0x35 set to 0x1
[ 0.237841] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.237843] ACPI: bus type PCI registered
[ 0.237845] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.237914] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.237916] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.237934] PCI: Using configuration type 1 for base access
[ 0.250113] ACPI: Added _OSI(Module Device)
[ 0.250115] ACPI: Added _OSI(Processor Device)
[ 0.250116] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.250117] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.251368] ACPI : EC: EC description table is found, configuring boot EC
[ 0.251382] ACPI : EC: EC started
[ 0.255143] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.329724] ACPI: Dynamic OEM Table Load:
[ 0.329731] ACPI: SSDT 0xFFFF8801B3CCA800 00046F (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.330153] ACPI: Dynamic OEM Table Load:
[ 0.330159] ACPI: SSDT 0xFFFF8801B3CCB000 0006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.330743] ACPI: Dynamic OEM Table Load:
[ 0.330748] ACPI: SSDT 0xFFFF8801B3CFAC00 000303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.331172] ACPI: Dynamic OEM Table Load:
[ 0.331176] ACPI: SSDT 0xFFFF8801B3D34200 000119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.332997] ACPI: Interpreter enabled
[ 0.333015] ACPI: (supports S0 S3 S4 S5)
[ 0.333017] ACPI: Using IOAPIC for interrupt routing
[ 0.333039] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.338806] ACPI: Power Resource [PUBS] (on)
[ 0.339491] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[ 0.341634] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[ 0.343529] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.343611] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.343674] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.343755] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.343834] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.343914] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.343977] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.344057] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.344136] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
[ 0.344140] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.344144] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.344195] PCI host bridge to bus 0000:ff
[ 0.344198] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.344205] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.344261] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.344312] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.344356] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.344399] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.344441] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.344509] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.344513] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.344668] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.344741] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.344743] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.344745] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.344747] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.344912] PCI host bridge to bus 0000:00
[ 0.344914] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.344916] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.344918] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.344920] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.344921] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.344923] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.344924] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.344930] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.344949] DMAR: Disabling batched IOTLB flush on Ironlake
[ 0.345012] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[ 0.345026] pci 0000:00:02.0: reg 0x10: [mem 0xf2000000-0xf23fffff 64bit]
[ 0.345031] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.345035] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807]
[ 0.345157] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.345195] pci 0000:00:16.0: reg 0x10: [mem 0xf2827800-0xf282780f 64bit]
[ 0.345274] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.345349] pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002
[ 0.345384] pci 0000:00:16.3: reg 0x10: [io 0x1808-0x180f]
[ 0.345396] pci 0000:00:16.3: reg 0x14: [mem 0xf2624000-0xf2624fff]
[ 0.345545] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
[ 0.345581] pci 0000:00:19.0: reg 0x10: [mem 0xf2600000-0xf261ffff]
[ 0.345593] pci 0000:00:19.0: reg 0x14: [mem 0xf2625000-0xf2625fff]
[ 0.345604] pci 0000:00:19.0: reg 0x18: [io 0x1820-0x183f]
[ 0.345674] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.345711] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.345759] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.345793] pci 0000:00:1a.0: reg 0x10: [mem 0xf2828000-0xf28283ff]
[ 0.345882] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.345918] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.345964] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.346000] pci 0000:00:1b.0: reg 0x10: [mem 0xf2620000-0xf2623fff 64bit]
[ 0.346089] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.346139] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.346181] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.346278] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.346318] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.346360] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.346456] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.346495] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.346539] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[ 0.346636] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.346675] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.346717] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.346813] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.346853] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.346899] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.346933] pci 0000:00:1d.0: reg 0x10: [mem 0xf2828400-0xf28287ff]
[ 0.347019] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.347057] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.347098] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.347225] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
[ 0.347389] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[ 0.347425] pci 0000:00:1f.2: reg 0x10: [io 0x1860-0x1867]
[ 0.347436] pci 0000:00:1f.2: reg 0x14: [io 0x1814-0x1817]
[ 0.347447] pci 0000:00:1f.2: reg 0x18: [io 0x1818-0x181f]
[ 0.347457] pci 0000:00:1f.2: reg 0x1c: [io 0x1810-0x1813]
[ 0.347468] pci 0000:00:1f.2: reg 0x20: [io 0x1840-0x185f]
[ 0.347479] pci 0000:00:1f.2: reg 0x24: [mem 0xf2827000-0xf28277ff]
[ 0.347524] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.347593] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.347616] pci 0000:00:1f.3: reg 0x10: [mem 0xf2828800-0xf28288ff 64bit]
[ 0.347646] pci 0000:00:1f.3: reg 0x20: [io 0x1880-0x189f]
[ 0.347737] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.347775] pci 0000:00:1f.6: reg 0x10: [mem 0xf2626000-0xf2626fff 64bit]
[ 0.347950] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.348131] pci 0000:03:00.0: [10ec:8172] type 00 class 0x028000
[ 0.348327] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.348391] pci 0000:03:00.0: reg 0x14: [mem 0xf2400000-0xf2403fff]
[ 0.349035] pci 0000:03:00.0: supports D1 D2
[ 0.349037] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.353792] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.353800] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.353810] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.353895] acpiphp: Slot [1] registered
[ 0.353901] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.353906] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.353910] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.353918] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.354037] pci 0000:0d:00.0: [1180:e822] type 00 class 0x080500
[ 0.354078] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.354101] pci 0000:0d:00.0: reg 0x10: [mem 0xf2500000-0xf25000ff]
[ 0.354255] pci 0000:0d:00.0: supports D1 D2
[ 0.354256] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.354391] pci 0000:0d:00.1: [1180:e230] type 00 class 0x088000
[ 0.354439] pci 0000:0d:00.1: reg 0x10: [mem 0xf2500400-0xf25004ff]
[ 0.354582] pci 0000:0d:00.1: supports D1 D2
[ 0.354584] pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.354713] pci 0000:0d:00.3: [1180:e832] type 00 class 0x0c0010
[ 0.354760] pci 0000:0d:00.3: reg 0x10: [mem 0xf2500800-0xf2500fff]
[ 0.354904] pci 0000:0d:00.3: supports D1 D2
[ 0.354905] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.361806] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.361814] pci 0000:00:1c.4: bridge window [mem 0xf2500000-0xf25fffff]
[ 0.361898] pci 0000:00:1e.0: PCI bridge to [bus 0e] (subtractive decode)
[ 0.361910] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.361912] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.361914] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.361916] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.361917] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.361919] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
[ 0.363516] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.363593] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.363715] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.363717] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.363720] vgaarb: loaded
[ 0.363721] vgaarb: bridge control possible 0000:00:02.0
[ 0.363963] SCSI subsystem initialized
[ 0.364018] libata version 3.00 loaded.
[ 0.364043] ACPI: bus type USB registered
[ 0.364059] usbcore: registered new interface driver usbfs
[ 0.364069] usbcore: registered new interface driver hub
[ 0.364088] usbcore: registered new device driver usb
[ 0.364246] PCI: Using ACPI for IRQ routing
[ 0.374019] PCI: pci_cache_line_size set to 64 bytes
[ 0.374291] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.374293] e820: reserve RAM buffer [mem 0xbb27c000-0xbbffffff]
[ 0.374296] e820: reserve RAM buffer [mem 0xbb35f000-0xbbffffff]
[ 0.374298] e820: reserve RAM buffer [mem 0xbb46f000-0xbbffffff]
[ 0.374301] e820: reserve RAM buffer [mem 0xbb717000-0xbbffffff]
[ 0.374303] e820: reserve RAM buffer [mem 0xbb76b000-0xbbffffff]
[ 0.374305] e820: reserve RAM buffer [mem 0xbb800000-0xbbffffff]
[ 0.374440] NetLabel: Initializing
[ 0.374442] NetLabel: domain hash size = 128
[ 0.374442] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.374456] NetLabel: unlabeled traffic allowed by default
[ 0.374550] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.374555] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.376573] amd_nb: Cannot enumerate AMD northbridges
[ 0.376590] clocksource: Switched to clocksource hpet
[ 0.383528] AppArmor: AppArmor Filesystem Enabled
[ 0.383618] pnp: PnP ACPI init
[ 0.385115] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.385117] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.385119] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.385121] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.385123] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.385125] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.385127] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.385128] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.385130] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.385132] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.385134] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.385136] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.385138] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.385140] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.385144] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.385506] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.385509] system 00:01: [io 0x1000-0x107f] could not be reserved
[ 0.385511] system 00:01: [io 0x1180-0x11ff] has been reserved
[ 0.385513] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.385515] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.385517] system 00:01: [io 0x1600-0x1641] has been reserved
[ 0.385519] system 00:01: [io 0x1644-0x167f] could not be reserved
[ 0.385521] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.385523] system 00:01: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.385525] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.385527] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.385529] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.385531] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.385532] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.385534] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.385537] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.385594] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.385617] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.385642] pnp 00:04: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 0.386781] pnp: PnP ACPI: found 5 devices
[ 0.393449] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.393509] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.393524] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.393527] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.393533] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.393544] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.393547] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.393553] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.393557] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.393565] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.393571] pci 0000:00:1c.4: bridge window [mem 0xf2500000-0xf25fffff]
[ 0.393581] pci 0000:00:1e.0: PCI bridge to [bus 0e]
[ 0.393596] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.393597] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.393599] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.393601] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.393602] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.393604] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff window]
[ 0.393606] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.393607] pci_bus 0000:03: resource 1 [mem 0xf2400000-0xf24fffff]
[ 0.393609] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ 0.393611] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[ 0.393612] pci_bus 0000:05: resource 2 [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.393614] pci_bus 0000:0d: resource 1 [mem 0xf2500000-0xf25fffff]
[ 0.393616] pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7 window]
[ 0.393618] pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff window]
[ 0.393619] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.393621] pci_bus 0000:0e: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.393623] pci_bus 0000:0e: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.393624] pci_bus 0000:0e: resource 9 [mem 0xc0000000-0xfebfffff window]
[ 0.393662] NET: Registered protocol family 2
[ 0.393864] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.394077] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.394375] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.394420] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.394478] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.394578] NET: Registered protocol family 1
[ 0.394606] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.395017] PCI: CLS 64 bytes, default 64
[ 0.395082] Unpacking initramfs...
[ 0.998953] Freeing initrd memory: 37712K
[ 0.999070] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.999073] software IO TLB [mem 0xb727c000-0xbb27c000] (64MB) mapped at [ffff8800b727c000-ffff8800bb27bfff]
[ 0.999274] Scanning for low memory corruption every 60 seconds
[ 0.999676] audit: initializing netlink subsys (disabled)
[ 0.999696] audit: type=2000 audit(1515975107.804:1): initialized
[ 1.000077] Initialise system trusted keyring
[ 1.000193] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.001741] zbud: loaded
[ 1.001941] VFS: Disk quotas dquot_6.6.0
[ 1.001976] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.002248] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.002504] fuse init (API version 7.23)
[ 1.002659] Key type big_key registered
[ 1.002677] Allocating IMA MOK and blacklist keyrings.
[ 1.003135] Key type asymmetric registered
[ 1.003139] Asymmetric key parser 'x509' registered
[ 1.003181] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.003219] io scheduler noop registered
[ 1.003222] io scheduler deadline registered (default)
[ 1.003253] io scheduler cfq registered
[ 1.003784] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.003790] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.003819] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[ 1.003820] vesafb: scrolling: redraw
[ 1.003821] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.003840] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90001000000, using 4032k, total 4032k
[ 1.003943] Console: switching to colour frame buffer device 160x50
[ 1.003971] fb0: VESA VGA frame buffer device
[ 1.003986] intel_idle: MWAIT substates: 0x1120
[ 1.003988] intel_idle: v0.4.1 model 0x25
[ 1.003989] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.004458] ACPI: AC Adapter [AC] (on-line)
[ 1.004526] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.004671] ACPI: Lid Switch [LID]
[ 1.004712] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.004716] ACPI: Sleep Button [SLPB]
[ 1.004756] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.004758] ACPI: Power Button [PWRF]
[ 1.009317] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.009322] ACPI: Thermal Zone [THM0] (45 C)
[ 1.009392] GHES: HEST is not enabled!
[ 1.009613] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.009662] ACPI: Battery Slot [BAT0] (battery absent)
[ 1.033215] 0000:00:16.3: ttyS4 at I/O 0x1808 (irq = 17, base_baud = 115200) is a 16550A
[ 1.033950] Linux agpgart interface v0.103
[ 1.034092] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 1.034128] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.034784] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 1.035054] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.038494] loop: module loaded
[ 1.038722] libphy: Fixed MDIO Bus: probed
[ 1.038726] tun: Universal TUN/TAP device driver, 1.6
[ 1.038727] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.038775] PPP generic driver version 2.4.2
[ 1.038844] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.038850] ehci-pci: EHCI PCI platform driver
[ 1.038990] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.038998] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.039012] ehci-pci 0000:00:1a.0: debug port 2
[ 1.042956] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.042971] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf2828000
[ 1.052636] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.052716] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.052718] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.052720] usb usb1: Product: EHCI Host Controller
[ 1.052721] usb usb1: Manufacturer: Linux 4.4.0-98-generic ehci_hcd
[ 1.052723] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.052906] hub 1-0:1.0: USB hub found
[ 1.052919] hub 1-0:1.0: 3 ports detected
[ 1.053142] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.053152] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.053165] ehci-pci 0000:00:1d.0: debug port 2
[ 1.057111] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.057123] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf2828400
[ 1.068716] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.068828] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.068831] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.068832] usb usb2: Product: EHCI Host Controller
[ 1.068834] usb usb2: Manufacturer: Linux 4.4.0-98-generic ehci_hcd
[ 1.068835] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.068998] hub 2-0:1.0: USB hub found
[ 1.069008] hub 2-0:1.0: 3 ports detected
[ 1.069144] ehci-platform: EHCI generic platform driver
[ 1.069158] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.069163] ohci-pci: OHCI PCI platform driver
[ 1.069173] ohci-platform: OHCI generic platform driver
[ 1.069181] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.069239] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.073624] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.073629] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.073826] mousedev: PS/2 mouse device common for all mice
[ 1.074131] rtc_cmos 00:02: RTC can wake from S4
[ 1.074282] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.074312] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.074319] i2c /dev entries driver
[ 1.074471] device-mapper: uevent: version 1.0.3
[ 1.074553] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 1.074587] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.075030] NET: Registered protocol family 10
[ 1.075302] NET: Registered protocol family 17
[ 1.075323] Key type dns_resolver registered
[ 1.075740] microcode: CPU0 sig=0x20652, pf=0x10, revision=0xe
[ 1.075755] microcode: CPU1 sig=0x20652, pf=0x10, revision=0xe
[ 1.075764] microcode: CPU2 sig=0x20652, pf=0x10, revision=0xe
[ 1.075781] microcode: CPU3 sig=0x20652, pf=0x10, revision=0xe
[ 1.075870] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.076280] registered taskstats version 1
[ 1.076314] Loading compiled-in X.509 certificates
[ 1.077547] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.078369] Loaded X.509 cert 'Build time autogenerated kernel key: 7431eaeda5a51458aeb00f8de0f18f89e178d882'
[ 1.078410] zswap: loaded using pool lzo/zbud
[ 1.080537] Key type trusted registered
[ 1.084672] Key type encrypted registered
[ 1.084680] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.084684] ima: No TPM chip found, activating TPM-bypass!
[ 1.084709] evm: HMAC attrs: 0x1
[ 1.085267] Magic number: 2:707:152
[ 1.085429] rtc_cmos 00:02: setting system clock to 2018-01-15 00:11:48 UTC (1515975108)
[ 1.091006] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.091009] EDD information not available.
[ 1.091240] PM: Hibernation image not present or could not be loaded.
[ 1.094157] Freeing unused kernel memory: 1492K
[ 1.094162] Write protecting the kernel read-only data: 14336k
[ 1.095181] Freeing unused kernel memory: 1744K
[ 1.095788] Freeing unused kernel memory: 108K
[ 1.118051] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.118195] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.118223] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.118257] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.119244] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.119295] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.130993] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.131039] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.131056] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.131510] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.214370] wmi: Mapper loaded
[ 1.223664] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.245695] pps_core: LinuxPPS API ver. 1 registered
[ 1.245701] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.250086] PTP clock support registered
[ 1.250410] sdhci: Secure Digital Host Controller Interface driver
[ 1.250415] sdhci: Copyright(c) Pierre Ossman
[ 1.255715] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 1)
[ 1.256035] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.256082] sdhci-pci 0000:0d:00.0: No vmmc regulator found
[ 1.256087] sdhci-pci 0000:0d:00.0: No vqmmc regulator found
[ 1.257615] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[ 1.260874] ahci 0000:00:1f.2: version 3.0
[ 1.261176] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.261246] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
[ 1.261256] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 1.268873] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.268879] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.278781] [drm] Initialized drm 1.1.0 20060810
[ 1.291445] scsi host0: ahci
[ 1.291771] scsi host1: ahci
[ 1.292064] scsi host2: ahci
[ 1.292310] scsi host3: ahci
[ 1.292553] scsi host4: ahci
[ 1.292831] scsi host5: ahci
[ 1.292981] ata1: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827100 irq 24
[ 1.292988] ata2: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827180 irq 24
[ 1.292992] ata3: DUMMY
[ 1.292995] ata4: DUMMY
[ 1.293001] ata5: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827300 irq 24
[ 1.293007] ata6: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827380 irq 24
[ 1.293536] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.336718] firewire_ohci 0000:0d:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 1.392732] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.392763] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.478867] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:39:6b:bd
[ 1.478876] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.478947] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
[ 1.479067] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 1.479305] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[ 1.479471] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 1.480505] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 1.480520] [drm] Memory usable by graphics device = 2048M
[ 1.480527] checking generic (d0000000 3f0000) vs hw (d0000000 10000000)
[ 1.480530] fb: switching to inteldrmfb from VESA VGA
[ 1.480582] Console: switching to colour dummy device 80x25
[ 1.480768] [drm] Replacing VGA console driver
[ 1.488855] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.488858] [drm] Driver supports precise vblank timestamp query.
[ 1.490377] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.525188] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.525195] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.525346] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.525353] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.525592] hub 1-1:1.0: USB hub found
[ 1.525709] hub 1-1:1.0: 6 ports detected
[ 1.525798] hub 2-1:1.0: USB hub found
[ 1.525988] hub 2-1:1.0: 8 ports detected
[ 1.616791] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.617746] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.617751] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.617756] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.617917] ata1.00: ATA-9: ADATA SP550, P0330AA, max UDMA/133
[ 1.617922] ata1.00: 468862128 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
[ 1.618436] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.618442] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.618447] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.618813] ata1.00: configured for UDMA/133
[ 1.619095] scsi 0:0:0:0: Direct-Access ATA ADATA SP550 0AA PQ: 0 ANSI: 5
[ 1.619501] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 1.619509] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.619591] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.619702] sd 0:0:0:0: [sda] Write Protect is off
[ 1.619710] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.619763] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.620661] sda: sda1 sda2 sda3
[ 1.621339] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.639487] fbcon: inteldrmfb (fb0) is primary device
[ 1.639723] Console: switching to colour frame buffer device 200x56
[ 1.639864] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.642776] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 1.643117] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 1.643297] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 1.796709] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.796727] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 1.836940] firewire_core 0000:0d:00.3: created device fw0: GUID 001f16ff396bbdff, S400
[ 1.892426] usb 2-1.1: New USB device found, idVendor=04b3, idProduct=3022
[ 1.892432] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.892436] usb 2-1.1: Product: IBM Preferred Pro USB Fingerprint Keyboard
[ 1.892440] usb 2-1.1: Manufacturer: Chicony
[ 1.893042] hub 2-1.1:1.0: USB hub found
[ 1.893400] hub 2-1.1:1.0: 2 ports detected
[ 1.893667] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[ 1.893671] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.893675] usb 1-1.4: Product: Broadcom Bluetooth Device
[ 1.893678] usb 1-1.4: Manufacturer: Broadcom Corp
[ 1.893681] usb 1-1.4: SerialNumber: 002713954474
[ 1.936730] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.939347] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.939621] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.941192] ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, LT09, max UDMA/66
[ 1.943887] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.944099] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.945553] ata2.00: configured for UDMA/66
[ 1.947405] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT30N LT09 PQ: 0 ANSI: 5
[ 1.963088] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.963093] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.963316] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.963447] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.964658] usb 2-1.2: new full-speed USB device number 4 using ehci-pci
[ 1.964686] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[ 1.996661] tsc: Refined TSC clocksource calibration: 2394.000 MHz
[ 1.996669] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22821391a86, max_idle_ns: 440795325644 ns
[ 2.060787] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c52f
[ 2.060794] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.060798] usb 2-1.2: Product: USB Receiver
[ 2.060801] usb 2-1.2: Manufacturer: Logitech
[ 2.062581] usb 1-1.6: New USB device found, idVendor=17ef, idProduct=480f
[ 2.062586] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.062590] usb 1-1.6: Product: Integrated Camera
[ 2.062593] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.075449] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.085600] usbcore: registered new interface driver usbhid
[ 2.085604] usbhid: USB HID core driver
[ 2.089611] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C52F.0001/input/input7
[ 2.089911] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0
[ 2.091190] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:046D:C52F.0002/input/input8
[ 2.136307] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[ 2.145188] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1
[ 2.168693] usb 2-1.1.1: new full-speed USB device number 5 using ehci-pci
[ 2.224032] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000/0x0, board id: 0, fw id: 578367
[ 2.224041] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.265415] usb 2-1.1.1: New USB device found, idVendor=04b3, idProduct=3021
[ 2.265421] usb 2-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.265426] usb 2-1.1.1: Product: IBM Preferred Pro USB Fingerprint Keyboard
[ 2.265429] usb 2-1.1.1: Manufacturer: Chicony
[ 2.268017] input: Chicony IBM Preferred Pro USB Fingerprint Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.0/0003:04B3:3021.0003/input/input9
[ 2.280156] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 2.280697] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.320977] hid-generic 0003:04B3:3021.0003: input,hidraw2: USB HID v1.10 Keyboard [Chicony IBM Preferred Pro USB Fingerprint Keyboard] on usb-0000:00:1d.0-1.1.1/input0
[ 2.322689] hid-generic 0003:04B3:3021.0004: hiddev0,hidraw3: USB HID v1.10 Device [Chicony IBM Preferred Pro USB Fingerprint Keyboard] on usb-0000:00:1d.0-1.1.1/input1
[ 2.392725] usb 2-1.1.2: new full-speed USB device number 6 using ehci-pci
[ 2.486797] usb 2-1.1.2: New USB device found, idVendor=0483, idProduct=2016
[ 2.486803] usb 2-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.486807] usb 2-1.1.2: Product: Biometric Coprocessor
[ 2.486811] usb 2-1.1.2: Manufacturer: STMicroelectronics
[ 2.600735] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.996871] clocksource: Switched to clocksource tsc
[ 3.667764] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.674216] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 4.674493] systemd[1]: Detected architecture x86-64.
[ 4.674755] systemd[1]: Set hostname to <usul-T510>.
[ 4.838195] systemd[1]: Listening on Journal Socket.
[ 4.838367] systemd[1]: Listening on Syslog Socket.
[ 4.838541] systemd[1]: Created slice User and Session Slice.
[ 4.838567] systemd[1]: Reached target Encrypted Volumes.
[ 4.838613] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.838666] systemd[1]: Listening on udev Kernel Socket.
[ 4.838894] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.838965] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.839020] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.839155] systemd[1]: Created slice System Slice.
[ 4.852959] systemd[1]: Starting Uncomplicated firewall...
[ 4.853738] systemd[1]: Started Braille Device Support.
[ 4.857530] systemd[1]: Starting Load Kernel Modules...
[ 4.857695] systemd[1]: Listening on udev Control Socket.
[ 4.858870] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.858918] systemd[1]: Reached target Slices.
[ 4.859163] systemd[1]: Listening on Journal Audit Socket.
[ 4.860507] systemd[1]: Starting Journal Service...
[ 4.861903] systemd[1]: Starting Set console keymap...
[ 4.866390] systemd[1]: Started Read required files in advance.
[ 4.868673] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.870302] systemd[1]: Mounting Debug File System...
[ 4.872276] systemd[1]: Mounting Huge Pages File System...
[ 4.873878] systemd[1]: Starting Nameserver information manager...
[ 4.876423] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.876506] systemd[1]: Reached target Remote File Systems (Pre).
[ 4.876585] systemd[1]: Reached target Remote File Systems.
[ 4.876858] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[ 4.879549] systemd[1]: Reached target User and Group Name Lookups.
[ 4.884033] systemd[1]: Started Uncomplicated firewall.
[ 4.884651] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 4.899878] systemd[1]: Mounted Debug File System.
[ 4.900094] systemd[1]: Mounted POSIX Message Queue File System.
[ 4.900259] systemd[1]: Mounted Huge Pages File System.
[ 4.904478] lp: driver loaded but no devices found
[ 4.914450] ppdev: user-space parallel port driver
[ 4.914623] systemd[1]: Started Nameserver information manager.
[ 4.926502] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
[ 4.927216] systemd[1]: Failed to start Load Kernel Modules.
[ 4.927431] systemd[1]: systemd-modules-load.service: Unit entered failed state.
[ 4.927522] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
[ 4.996432] systemd[1]: Started Journal Service.
[ 5.132922] random: nonblocking pool is initialized
[ 5.188622] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 5.367304] systemd-journald[302]: Received request to flush runtime journal from PID 1
[ 5.544601] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.633575] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\_SB_.PCI0.LPC_.PMIO) (20150930/utaddress-254)
[ 5.633591] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.633600] ACPI Warning: SystemIO range 0x00000000000011C0-0x00000000000011CF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB_.PCI0.LPC_.LPIO) (20150930/utaddress-254)
[ 5.633609] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.633613] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB_.PCI0.LPC_.LPIO) (20150930/utaddress-254)
[ 5.633644] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.633649] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB_.PCI0.LPC_.LPIO) (20150930/utaddress-254)
[ 5.633658] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.633662] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.644022] Non-volatile memory driver v1.3
[ 5.681854] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 5.681862] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 5.681866] thinkpad_acpi: ThinkPad BIOS 6MET92WW (1.52 ), EC 6MHT46WW-1.21
[ 5.681870] thinkpad_acpi: Lenovo ThinkPad T510, model 4313CTO
[ 5.698042] thinkpad_acpi: detected a 16-level brightness capable ThinkPad
[ 5.698269] thinkpad_acpi: radio switch found; radios are enabled
[ 5.698555] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 5.698560] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 5.707669] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 5.717806] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 5.721989] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input11
[ 5.753746] snd_hda_codec_conexant hdaudioC0D0: CX20585: BIOS auto-probing.
[ 5.754280] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20585: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 5.754288] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.754296] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[ 5.754301] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 5.754305] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 5.754312] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23
[ 5.754318] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b
[ 5.754324] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a
[ 5.755839] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 5.764045] Bluetooth: Core ver 2.21
[ 5.764078] NET: Registered protocol family 31
[ 5.764083] Bluetooth: HCI device and connection manager initialized
[ 5.764092] Bluetooth: HCI socket layer initialized
[ 5.764098] Bluetooth: L2CAP socket layer initialized
[ 5.764111] Bluetooth: SCO socket layer initialized
[ 5.781574] media: Linux media interface: v0.10
[ 5.786963] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 5.787174] input: HDA Intel MID Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 5.787408] input: HDA Intel MID Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 5.787632] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 5.787797] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 5.787989] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 5.788176] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 5.820191] usbcore: registered new interface driver btusb
[ 5.830806] Linux video capture interface: v2.00
[ 5.867869] rtl8192se: FW Power Save off (module option)
[ 5.868040] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
Loading firmware rtlwifi/rtl8192sefw.bin
[ 5.895795] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 5.910401] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480f)
[ 5.923954] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input19
[ 5.924135] usbcore: registered new interface driver uvcvideo
[ 5.924140] USB Video Class driver (1.1.1)
[ 5.981409] SSE version of gcm_enc/dec engaged.
[ 6.140854] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 6.328335] cfg80211: World regulatory domain updated:
[ 6.328343] cfg80211: DFS Master region: unset
[ 6.328347] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6.328354] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.328360] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.328365] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.328371] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 6.328377] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 6.328381] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 6.328386] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.328391] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 6.446039] rtl8192se 0000:03:00.0 wlp3s0: renamed from wlan0
[ 6.681038] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
[ 7.369431] EXT4-fs (sda3): recovery complete
[ 7.369983] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 7.373637] EXT4-fs (sda2): recovery complete
[ 7.373646] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.539488] audit: type=1400 audit(1515975114.947:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=887 comm="apparmor_parser"
[ 7.539511] audit: type=1400 audit(1515975114.947:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=887 comm="apparmor_parser"
[ 7.539527] audit: type=1400 audit(1515975114.947:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=887 comm="apparmor_parser"
[ 7.539542] audit: type=1400 audit(1515975114.947:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=887 comm="apparmor_parser"
[ 7.542073] audit: type=1400 audit(1515975114.951:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3440/usr/lib/snapd/snap-confine" pid=888 comm="apparmor_parser"
[ 7.542093] audit: type=1400 audit(1515975114.951:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3440/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=888 comm="apparmor_parser"
[ 7.542111] audit: type=1400 audit(1515975114.951:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3440/usr/lib/snapd/snap-confine//snap_update_ns" pid=888 comm="apparmor_parser"
[ 7.545985] audit: type=1400 audit(1515975114.955:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=886 comm="apparmor_parser"
[ 7.546006] audit: type=1400 audit(1515975114.955:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=886 comm="apparmor_parser"
[ 7.547906] audit: type=1400 audit(1515975114.955:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3604/usr/lib/snapd/snap-confine" pid=889 comm="apparmor_parser"
[ 7.685602] Adding 4194300k swap on /media/usul/Data/swap/swap0. Priority:-1 extents:229 across:31096828k SSFS
[ 7.911953] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.911961] Bluetooth: BNEP filters: protocol multicast
[ 7.911971] Bluetooth: BNEP socket layer initialized
[ 8.315076] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 8.532440] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 8.656069] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input10
[ 8.683766] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 8.707245] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 8.921064] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 9.072036] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 14.332384] Guest personality initialized and is inactive
[ 14.332506] VMCI host device registered (name=vmci, major=10, minor=55)
[ 14.332511] Initialized host personality
[ 14.387561] NET: Registered protocol family 40
[ 15.360534] audit_printk_skb: 93 callbacks suppressed
[ 15.360541] audit: type=1400 audit(1515975122.767:43): apparmor="ALLOWED" operation="exec" profile="snap.anbox.container-manager" name="/sbin/xtables-multi" pid=1529 comm="anbox-bridge.sh" requested_mask="x" denied_mask="x" fsuid=0 ouid=0 target="snap.anbox.container-manager//null-/sbin/xtables-multi"
[ 15.367712] audit: type=1400 audit(1515975122.775:44): apparmor="ALLOWED" operation="file_inherit" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/dev/null" pid=1529 comm="iptables" requested_mask="w" denied_mask="w" fsuid=0 ouid=0
[ 15.369198] audit: type=1400 audit(1515975122.779:45): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/etc/ld.so.cache" pid=1529 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 15.370936] audit: type=1400 audit(1515975122.779:46): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libip4tc.so.0.1.0" pid=1529 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 15.379866] audit: type=1400 audit(1515975122.787:47): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libip6tc.so.0.1.0" pid=1529 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 15.380232] audit: type=1400 audit(1515975122.787:48): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libxtables.so.11.0.0" pid=1529 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 15.386084] audit: type=1400 audit(1515975122.795:49): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libc-2.23.so" pid=1529 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 15.386261] audit: type=1400 audit(1515975122.795:50): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libdl-2.23.so" pid=1529 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 15.386584] audit: type=1400 audit(1515975122.795:51): apparmor="ALLOWED" operation="file_mprotect" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/sbin/xtables-multi" pid=1529 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 15.386632] audit: type=1400 audit(1515975122.795:52): apparmor="ALLOWED" operation="file_mprotect" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/ld-2.23.so" pid=1529 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 15.425400] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.491174] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 15.561445] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 19.602007] wlp3s0: authenticate with c0:25:06:44:0e:0e
[ 19.621108] wlp3s0: send auth to c0:25:06:44:0e:0e (try 1/3)
[ 19.624616] wlp3s0: authenticated
[ 19.633000] wlp3s0: associate with c0:25:06:44:0e:0e (try 1/3)
[ 19.650997] wlp3s0: RX AssocResp from c0:25:06:44:0e:0e (capab=0x431 status=0 aid=1)
[ 19.652518] wlp3s0: associated
[ 19.652596] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 19.660259] cfg80211: Regulatory domain changed to country: DE
[ 19.660266] cfg80211: DFS Master region: ETSI
[ 19.660268] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 19.660273] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 19.660277] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 19.660282] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 19.660285] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[ 19.660288] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 473.098712] perf interrupt took too long (2520 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 1575.260131] perf interrupt took too long (5004 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[13222.493690] wlp3s0: deauthenticating from c0:25:06:44:0e:0e by local choice (Reason: 3=DEAUTH_LEAVING)
[13222.563729] cfg80211: World regulatory domain updated:
[13222.563736] cfg80211: DFS Master region: unset
[13222.563738] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[13222.563743] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[13222.563747] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[13222.563750] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[13222.563754] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[13222.563758] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[13222.563762] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[13222.563765] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[13222.563768] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[13232.691111] PM: Syncing filesystems ... done.
[13232.705305] PM: Preparing system for sleep (mem)
[13232.706327] Freezing user space processes ... (elapsed 0.002 seconds) done.
[13232.708703] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[13232.710018] PM: Suspending system (mem)
[13232.710041] Suspending console(s) (use no_console_suspend to debug)
[13232.897305] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[13232.898008] sd 0:0:0:0: [sda] Stopping disk
[13232.957671] e1000e: EEE TX LPI TIMER: 00000000
[13233.001498] PM: suspend of devices complete after 291.188 msecs
[13233.014536] PM: late suspend of devices complete after 13.033 msecs
[13233.018956] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[13233.019108] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[13233.019234] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[13233.034601] PM: noirq suspend of devices complete after 20.060 msecs
[13233.034813] ACPI: Preparing to enter system sleep state S3
[13233.214411] ACPI : EC: EC stopped
[13233.214412] PM: Saving platform NVS memory
[13233.214421] Disabling non-boot CPUs ...
[13233.214846] Broke affinity for irq 19
[13233.215888] smpboot: CPU 1 is now offline
[13233.227479] Broke affinity for irq 19
[13233.227490] Broke affinity for irq 24
[13233.228530] smpboot: CPU 2 is now offline
[13233.239303] Broke affinity for irq 1
[13233.239313] Broke affinity for irq 9
[13233.239319] Broke affinity for irq 12
[13233.239325] Broke affinity for irq 17
[13233.239331] Broke affinity for irq 19
[13233.239336] Broke affinity for irq 23
[13233.239340] Broke affinity for irq 24
[13233.239342] Broke affinity for irq 26
[13233.240384] smpboot: CPU 3 is now offline
[13233.255764] ACPI: Low-level resume complete
[13233.255818] ACPI : EC: EC started
[13233.255819] PM: Restoring platform NVS memory
[13233.256506] microcode: CPU0 microcode updated early to revision 0xe, date = 2013-06-26
[13233.256538] Enabling non-boot CPUs ...
[13233.275707] x86: Booting SMP configuration:
[13233.275708] smpboot: Booting Node 0 Processor 1 APIC 0x1
[13233.315634] cache: parent cpu1 should not be sleeping
[13233.355582] CPU1 is up
[13233.375726] smpboot: Booting Node 0 Processor 2 APIC 0x4
[13233.376122] microcode: CPU2 microcode updated early to revision 0xe, date = 2013-06-26
[13233.415632] cache: parent cpu2 should not be sleeping
[13233.455580] CPU2 is up
[13233.475758] smpboot: Booting Node 0 Processor 3 APIC 0x5
[13233.515635] cache: parent cpu3 should not be sleeping
[13233.555589] CPU3 is up
[13233.557790] ACPI: Waking up from system sleep state S3
[13233.899992] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[13233.900044] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[13233.900151] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[13233.900318] PM: noirq resume of devices complete after 16.782 msecs
[13233.902405] PM: early resume of devices complete after 2.066 msecs
[13233.902445] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[13233.903232] rtc_cmos 00:02: System wakeup disabled by ACPI
[13233.905734] sd 0:0:0:0: [sda] Starting disk
[13234.131562] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[13234.219606] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[13234.220649] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[13234.220656] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[13234.220657] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[13234.221593] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[13234.221597] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[13234.221602] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[13234.222107] ata1.00: configured for UDMA/133
[13234.227587] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[13234.230002] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[13234.230213] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[13234.234247] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[13234.234473] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[13234.235997] ata2.00: configured for UDMA/66
[13234.239644] ata5: SATA link down (SStatus 0 SControl 300)
[13234.243590] ata6: SATA link down (SStatus 0 SControl 300)
[13234.295588] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[13234.403608] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[13234.406115] PM: resume of devices complete after 503.702 msecs
[13234.406893] PM: Finishing wakeup.
[13234.406896] Restarting tasks ... done.
[13234.455582] firewire_core 0000:0d:00.3: rediscovered device fw0
[13234.615709] e1000e: enp0s25 NIC Link is Down
[13234.620508] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[13234.673093] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[13234.771663] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[13234.774104] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[13234.987831] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[13235.052416] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[13236.910241] wlp3s0: authenticate with c0:25:06:44:0e:0e
[13236.927785] wlp3s0: send auth to c0:25:06:44:0e:0e (try 1/3)
[13236.931917] wlp3s0: authenticated
[13236.935850] wlp3s0: associate with c0:25:06:44:0e:0e (try 1/3)
[13236.943955] wlp3s0: RX AssocResp from c0:25:06:44:0e:0e (capab=0x431 status=0 aid=5)
[13236.945760] wlp3s0: associated
[13236.946912] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[13236.969903] cfg80211: Regulatory domain changed to country: DE
[13236.969912] cfg80211: DFS Master region: ETSI
[13236.969916] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[13236.969923] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[13236.969929] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[13236.969935] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[13236.969940] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[13236.969945] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 8.435]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 8.436] X Protocol Version 11, Revision 0
[ 8.436] Build Operating System: Linux 4.4.0-97-generic x86_64 Ubuntu
[ 8.436] Current Operating System: Linux usul-T510 4.4.0-98-generic #121-Ubuntu SMP Tue Oct 10 14:24:03 UTC 2017 x86_64
[ 8.436] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-98-generic root=UUID=89e308b2-e5ca-485c-bb0f-7784c58bfcc0 ro quiet splash vt.handoff=7
[ 8.436] Build Date: 13 October 2017 01:57:05PM
[ 8.436] xorg-server 2:1.18.4-0ubuntu0.7 (For technical support please see http://www.ubuntu.com/support)
[ 8.436] Current version of pixman: 0.33.6
[ 8.436] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 8.436] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 8.436] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 15 01:11:56 2018
[ 8.437] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 8.438] (==) No Layout section. Using the first Screen section.
[ 8.438] (==) No screen section available. Using defaults.
[ 8.438] (**) |-->Screen "Default Screen Section" (0)
[ 8.438] (**) | |-->Monitor "<default monitor>"
[ 8.440] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 8.440] (==) Automatically adding devices
[ 8.440] (==) Automatically enabling devices
[ 8.440] (==) Automatically adding GPU devices
[ 8.440] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 8.440] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 8.440] Entry deleted from font path.
[ 8.440] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 8.440] Entry deleted from font path.
[ 8.440] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 8.440] Entry deleted from font path.
[ 8.440] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 8.440] Entry deleted from font path.
[ 8.440] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 8.440] Entry deleted from font path.
[ 8.440] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 8.440] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 8.440] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 8.440] (II) Loader magic: 0x559703be9dc0
[ 8.440] (II) Module ABI versions:
[ 8.440] X.Org ANSI C Emulation: 0.4
[ 8.440] X.Org Video Driver: 20.0
[ 8.441] X.Org XInput driver : 22.1
[ 8.441] X.Org Server Extension : 9.0
[ 8.444] (++) using VT number 7
[ 8.444] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 8.445] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 8.449] (--) PCI:*(0:0:2:0) 8086:0046:17aa:215a rev 2, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 8.449] (II) LoadModule: "glx"
[ 8.455] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 8.497] (II) Module glx: vendor="X.Org Foundation"
[ 8.497] compiled for 1.18.4, module version = 1.0.0
[ 8.497] ABI class: X.Org Server Extension, version 9.0
[ 8.497] (==) AIGLX enabled
[ 8.497] (==) Matched intel as autoconfigured driver 0
[ 8.497] (==) Matched intel as autoconfigured driver 1
[ 8.497] (==) Matched modesetting as autoconfigured driver 2
[ 8.497] (==) Matched fbdev as autoconfigured driver 3
[ 8.497] (==) Matched vesa as autoconfigured driver 4
[ 8.497] (==) Assigned the driver to the xf86ConfigLayout
[ 8.497] (II) LoadModule: "intel"
[ 8.497] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 8.500] (II) Module intel: vendor="X.Org Foundation"
[ 8.500] compiled for 1.18.4, module version = 2.99.917
[ 8.500] Module class: X.Org Video Driver
[ 8.500] ABI class: X.Org Video Driver, version 20.0
[ 8.501] (II) LoadModule: "modesetting"
[ 8.501] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 8.501] (II) Module modesetting: vendor="X.Org Foundation"
[ 8.501] compiled for 1.18.4, module version = 1.18.4
[ 8.501] Module class: X.Org Video Driver
[ 8.501] ABI class: X.Org Video Driver, version 20.0
[ 8.501] (II) LoadModule: "fbdev"
[ 8.502] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 8.502] (II) Module fbdev: vendor="X.Org Foundation"
[ 8.502] compiled for 1.18.1, module version = 0.4.4
[ 8.502] Module class: X.Org Video Driver
[ 8.502] ABI class: X.Org Video Driver, version 20.0
[ 8.502] (II) LoadModule: "vesa"
[ 8.502] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 8.502] (II) Module vesa: vendor="X.Org Foundation"
[ 8.502] compiled for 1.18.1, module version = 2.3.4
[ 8.502] Module class: X.Org Video Driver
[ 8.502] ABI class: X.Org Video Driver, version 20.0
[ 8.502] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 8.503] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 8.503] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 8.503] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 8.503] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 8.503] (II) FBDEV: driver for framebuffer: fbdev
[ 8.503] (II) VESA: driver for VESA chipsets: vesa
[ 8.505] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010
[ 8.505] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1.2 (Timo Aaltonen <tjaalton@debian.org>)
[ 8.505] (II) intel(0): SNA compiled for use with valgrind
[ 8.506] (WW) Falling back to old probe method for modesetting
[ 8.506] (WW) Falling back to old probe method for fbdev
[ 8.506] (II) Loading sub module "fbdevhw"
[ 8.506] (II) LoadModule: "fbdevhw"
[ 8.507] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 8.507] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 8.507] compiled for 1.18.4, module version = 0.0.2
[ 8.507] ABI class: X.Org Video Driver, version 20.0
[ 8.507] (WW) Falling back to old probe method for vesa
[ 8.508] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 8.508] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2; using a maximum of 2 threads
[ 8.508] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 8.508] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 8.509] (==) intel(0): RGB weight 888
[ 8.509] (==) intel(0): Default visual is TrueColor
[ 8.510] (II) intel(0): Output LVDS1 has no monitor section
[ 8.524] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[ 8.524] (II) intel(0): Enabled output LVDS1
[ 8.524] (II) intel(0): Output VGA1 has no monitor section
[ 8.524] (II) intel(0): Enabled output VGA1
[ 8.524] (II) intel(0): Output HDMI1 has no monitor section
[ 8.524] (II) intel(0): Enabled output HDMI1
[ 8.524] (II) intel(0): Output DP1 has no monitor section
[ 8.524] (II) intel(0): Enabled output DP1
[ 8.524] (II) intel(0): Output HDMI2 has no monitor section
[ 8.524] (II) intel(0): Enabled output HDMI2
[ 8.524] (II) intel(0): Output HDMI3 has no monitor section
[ 8.524] (II) intel(0): Enabled output HDMI3
[ 8.524] (II) intel(0): Output DP2 has no monitor section
[ 8.524] (II) intel(0): Enabled output DP2
[ 8.524] (II) intel(0): Output DP3 has no monitor section
[ 8.524] (II) intel(0): Enabled output DP3
[ 8.524] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 8.524] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 8.524] (II) intel(0): Enabled output VIRTUAL1
[ 8.525] (--) intel(0): Output LVDS1 using initial mode 1600x900 on pipe 0
[ 8.525] (--) intel(0): Output HDMI1 using initial mode 2560x1080 on pipe 1
[ 8.525] (==) intel(0): TearFree disabled
[ 8.525] (==) intel(0): DPI set to (96, 96)
[ 8.525] (II) Loading sub module "dri2"
[ 8.525] (II) LoadModule: "dri2"
[ 8.525] (II) Module "dri2" already built-in
[ 8.525] (II) Loading sub module "present"
[ 8.525] (II) LoadModule: "present"
[ 8.525] (II) Module "present" already built-in
[ 8.526] (II) UnloadModule: "modesetting"
[ 8.526] (II) Unloading modesetting
[ 8.526] (II) UnloadModule: "fbdev"
[ 8.526] (II) Unloading fbdev
[ 8.526] (II) UnloadSubModule: "fbdevhw"
[ 8.526] (II) Unloading fbdevhw
[ 8.526] (II) UnloadModule: "vesa"
[ 8.526] (II) Unloading vesa
[ 8.526] (==) Depth 24 pixmap format is 32 bpp
[ 8.532] (II) intel(0): SNA initialized with Ironlake (gen5) backend
[ 8.532] (==) intel(0): Backing store enabled
[ 8.532] (==) intel(0): Silken mouse enabled
[ 8.533] (II) intel(0): HW Cursor enabled
[ 8.533] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 8.534] (==) intel(0): DPMS enabled
[ 8.535] (==) intel(0): Display hotplug detection enabled
[ 8.535] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 8.535] (II) intel(0): [DRI2] Setup complete
[ 8.535] (II) intel(0): [DRI2] DRI driver: i965
[ 8.535] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 8.535] (II) intel(0): direct rendering: DRI2 enabled
[ 8.535] (II) intel(0): hardware support for Present enabled
[ 8.535] (--) RandR disabled
[ 8.548] (II) SELinux: Disabled on system
[ 8.605] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 8.605] (II) AIGLX: enabled GLX_ARB_create_context
[ 8.605] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 8.605] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 8.605] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 8.605] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 8.605] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 8.605] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 8.605] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 8.605] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 8.605] (II) AIGLX: Loaded and initialized i965
[ 8.605] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 8.628] (II) intel(0): switch to mode 1600x900@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 8.628] (II) intel(0): switch to mode 2560x1080@60.0 on HDMI1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 8.629] (II) intel(0): Setting screen physical size to 677 x 285
[ 8.716] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 8.716] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 8.716] (II) LoadModule: "evdev"
[ 8.716] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 8.719] (II) Module evdev: vendor="X.Org Foundation"
[ 8.719] compiled for 1.18.1, module version = 2.10.1
[ 8.719] Module class: X.Org XInput Driver
[ 8.719] ABI class: X.Org XInput driver, version 22.1
[ 8.719] (II) Using input driver 'evdev' for 'Power Button'
[ 8.719] (**) Power Button: always reports core events
[ 8.719] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 8.719] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 8.719] (--) evdev: Power Button: Found keys
[ 8.719] (II) evdev: Power Button: Configuring as keyboard
[ 8.719] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 8.719] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 8.719] (**) Option "xkb_rules" "evdev"
[ 8.719] (**) Option "xkb_model" "pc105"
[ 8.719] (**) Option "xkb_layout" "us"
[ 8.720] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 8.720] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 8.720] (II) Using input driver 'evdev' for 'Video Bus'
[ 8.720] (**) Video Bus: always reports core events
[ 8.720] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 8.721] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 8.721] (--) evdev: Video Bus: Found keys
[ 8.721] (II) evdev: Video Bus: Configuring as keyboard
[ 8.721] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event4"
[ 8.721] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 8.721] (**) Option "xkb_rules" "evdev"
[ 8.721] (**) Option "xkb_model" "pc105"
[ 8.721] (**) Option "xkb_layout" "us"
[ 8.722] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 8.722] (II) No input driver specified, ignoring this device.
[ 8.722] (II) This device may have been added with another device file.
[ 8.722] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 8.722] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 8.722] (II) Using input driver 'evdev' for 'Sleep Button'
[ 8.722] (**) Sleep Button: always reports core events
[ 8.722] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 8.722] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 8.722] (--) evdev: Sleep Button: Found keys
[ 8.722] (II) evdev: Sleep Button: Configuring as keyboard
[ 8.722] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 8.722] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 8.722] (**) Option "xkb_rules" "evdev"
[ 8.722] (**) Option "xkb_model" "pc105"
[ 8.722] (**) Option "xkb_layout" "us"
[ 8.725] (II) config/udev: Adding input device Integrated Camera (/dev/input/event17)
[ 8.725] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 8.725] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 8.725] (**) Integrated Camera: always reports core events
[ 8.725] (**) evdev: Integrated Camera: Device: "/dev/input/event17"
[ 8.725] (--) evdev: Integrated Camera: Vendor 0x17ef Product 0x480f
[ 8.725] (--) evdev: Integrated Camera: Found keys
[ 8.725] (II) evdev: Integrated Camera: Configuring as keyboard
[ 8.725] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input19/event17"
[ 8.725] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 9)
[ 8.725] (**) Option "xkb_rules" "evdev"
[ 8.725] (**) Option "xkb_model" "pc105"
[ 8.725] (**) Option "xkb_layout" "us"
[ 8.726] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event10)
[ 8.726] (II) No input driver specified, ignoring this device.
[ 8.726] (II) This device may have been added with another device file.
[ 8.726] (II) config/udev: Adding input device HDA Intel MID Dock Mic (/dev/input/event11)
[ 8.727] (II) No input driver specified, ignoring this device.
[ 8.727] (II) This device may have been added with another device file.
[ 8.727] (II) config/udev: Adding input device HDA Intel MID Dock Headphone (/dev/input/event12)
[ 8.727] (II) No input driver specified, ignoring this device.
[ 8.727] (II) This device may have been added with another device file.
[ 8.728] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event13)
[ 8.728] (II) No input driver specified, ignoring this device.
[ 8.728] (II) This device may have been added with another device file.
[ 8.728] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event14)
[ 8.729] (II) No input driver specified, ignoring this device.
[ 8.729] (II) This device may have been added with another device file.
[ 8.729] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=7 (/dev/input/event15)
[ 8.730] (II) No input driver specified, ignoring this device.
[ 8.730] (II) This device may have been added with another device file.
[ 8.730] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=8 (/dev/input/event16)
[ 8.730] (II) No input driver specified, ignoring this device.
[ 8.730] (II) This device may have been added with another device file.
[ 8.732] (II) config/udev: Adding input device Chicony IBM Preferred Pro USB Fingerprint Keyboard (/dev/input/event7)
[ 8.732] (**) Chicony IBM Preferred Pro USB Fingerprint Keyboard: Applying InputClass "evdev keyboard catchall"
[ 8.732] (II) Using input driver 'evdev' for 'Chicony IBM Preferred Pro USB Fingerprint Keyboard'
[ 8.732] (**) Chicony IBM Preferred Pro USB Fingerprint Keyboard: always reports core events
[ 8.732] (**) evdev: Chicony IBM Preferred Pro USB Fingerprint Keyboard: Device: "/dev/input/event7"
[ 8.732] (--) evdev: Chicony IBM Preferred Pro USB Fingerprint Keyboard: Vendor 0x4b3 Product 0x3021
[ 8.732] (--) evdev: Chicony IBM Preferred Pro USB Fingerprint Keyboard: Found keys
[ 8.732] (II) evdev: Chicony IBM Preferred Pro USB Fingerprint Keyboard: Configuring as keyboard
[ 8.732] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.0/0003:04B3:3021.0003/input/input9/event7"
[ 8.733] (II) XINPUT: Adding extended input device "Chicony IBM Preferred Pro USB Fingerprint Keyboard" (type: KEYBOARD, id 10)
[ 8.733] (**) Option "xkb_rules" "evdev"
[ 8.733] (**) Option "xkb_model" "pc105"
[ 8.733] (**) Option "xkb_layout" "us"
[ 8.735] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
[ 8.735] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 8.735] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 8.735] (**) Logitech USB Receiver: always reports core events
[ 8.735] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event5"
[ 8.788] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 8.788] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 8.788] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 8.788] (--) evdev: Logitech USB Receiver: Found relative axes
[ 8.788] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 8.788] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 8.788] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 8.788] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 8.788] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 8.788] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C52F.0001/input/input7/event5"
[ 8.788] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 11)
[ 8.788] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 8.789] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 8.789] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 8.789] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 8.789] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 8.790] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 8.790] (II) No input driver specified, ignoring this device.
[ 8.790] (II) This device may have been added with another device file.
[ 8.791] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6)
[ 8.791] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 8.791] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 8.791] (**) Logitech USB Receiver: always reports core events
[ 8.791] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event6"
[ 8.791] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 8.791] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 8.791] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 8.791] (--) evdev: Logitech USB Receiver: Found relative axes
[ 8.791] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 8.791] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 8.791] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 8.791] (--) evdev: Logitech USB Receiver: Found keys
[ 8.791] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 8.791] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 8.791] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 8.791] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 8.791] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 8.791] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:046D:C52F.0002/input/input8/event6"
[ 8.791] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 12)
[ 8.791] (**) Option "xkb_rules" "evdev"
[ 8.791] (**) Option "xkb_model" "pc105"
[ 8.791] (**) Option "xkb_layout" "us"
[ 8.792] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 8.792] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 8.792] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 8.792] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 8.792] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 8.792] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 8.793] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 8.793] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 8.793] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 8.793] (**) AT Translated Set 2 keyboard: always reports core events
[ 8.793] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 8.793] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 8.793] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 8.793] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 8.793] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 8.793] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 8.793] (**) Option "xkb_rules" "evdev"
[ 8.793] (**) Option "xkb_model" "pc105"
[ 8.793] (**) Option "xkb_layout" "us"
[ 8.794] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 8.794] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 8.794] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall"
[ 8.794] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 8.794] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 8.794] (II) LoadModule: "synaptics"
[ 8.795] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 8.795] (II) Module synaptics: vendor="X.Org Foundation"
[ 8.795] compiled for 1.18.1, module version = 1.8.2
[ 8.795] Module class: X.Org XInput Driver
[ 8.795] ABI class: X.Org XInput driver, version 22.1
[ 8.795] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 8.795] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 8.795] (**) Option "Device" "/dev/input/event8"
[ 9.028] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 9.028] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 778 - 6239 (res 72)
[ 9.028] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 841 - 5330 (res 100)
[ 9.028] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 9.028] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 9.028] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 9.028] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 9.028] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 9.028] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 9.068] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event8"
[ 9.068] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 9.068] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 9.068] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 9.068] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.028
[ 9.068] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 9.068] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 9.068] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 9.068] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 9.068] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 9.069] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 9.069] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 9.070] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event18)
[ 9.070] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 9.070] (**) TPPS/2 IBM TrackPoint: Applying InputClass "trackpoint catchall"
[ 9.070] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 9.070] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 9.070] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event18"
[ 9.070] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 9.070] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 9.070] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 9.070] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 9.070] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 9.070] (**) Option "Emulate3Buttons" "true"
[ 9.070] (**) Option "EmulateWheel" "true"
[ 9.070] (**) Option "EmulateWheelButton" "2"
[ 9.070] (**) Option "YAxisMapping" "4 5"
[ 9.070] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 9.070] (**) Option "XAxisMapping" "6 7"
[ 9.070] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
[ 9.070] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 9.070] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input10/event18"
[ 9.070] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 15)
[ 9.070] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 9.071] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 9.071] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 9.071] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 9.071] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 9.071] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2)
[ 9.071] (II) No input driver specified, ignoring this device.
[ 9.071] (II) This device may have been added with another device file.
[ 9.075] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event9)
[ 9.075] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 9.075] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 9.075] (**) ThinkPad Extra Buttons: always reports core events
[ 9.075] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event9"
[ 9.075] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 9.075] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 9.075] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 9.075] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input11/event9"
[ 9.075] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 16)
[ 9.075] (**) Option "xkb_rules" "evdev"
[ 9.076] (**) Option "xkb_model" "pc105"
[ 9.076] (**) Option "xkb_layout" "us"
[ 9.108] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2)
[ 9.108] (II) No input driver specified, ignoring this device.
[ 9.108] (II) This device may have been added with another device file.
[ 9.109] (WW) config/udev: device TPPS/2 IBM TrackPoint already added. Ignoring.
[ 10.526] (II) intel(0): EDID vendor "LEN", prod id 16561
[ 10.526] (II) intel(0): Printing DDC gathered Modelines:
[ 10.526] (II) intel(0): Modeline "1600x900"x0.0 108.50 1600 1648 1680 1920 900 903 908 942 -hsync -vsync (56.5 kHz eP)
[ 10.526] (II) intel(0): Modeline "1600x900"x0.0 90.43 1600 1648 1680 1920 900 903 908 942 -hsync -vsync (47.1 kHz e)
[ 13222.988] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 14126.575] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 14126.576] (II) intel(0): switch to mode 2560x1080@60.0 on HDMI1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 14126.760] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
Dankeschön, ja es wäre hilfreich bei einem Kernel wo es nicht funktioniert.
Ich sehe auch der Rechner war nicht richtig runtergefahren. Bitte einmal Komplett ausschalten wenn möglich und danach neu hochfahren mit dem nicht funktionierenden Kernel.
Dann die ausgabe hier posten. Des Weiteren könntest du versuchen für den externen Monitor diesen beim Hochfahren abzuziehen und sobald er fertig ist mit booten wieder anzuschließen,
um dann zu sehen ob die Auflösung passt. Gruß Neko
|
sirbender
(Themenstarter)
Anmeldungsdatum: 4. Februar 2011
Beiträge: 354
|
Hier beide Kernel wo Wifi nicht funktioniert und die Display-Ausgabe spinnt. Ich habe den externen Monitor im Betrieb abgestoepselt und wieder angestoepselt und dann ein dmesg gemacht. Glaub da ist aber nix passiert. Ich glaube bei der Display Geschichte habt ihr mich falsch verstanden. Der Laptop hat eine Aufloesung von 1600x900. Der externe Monitor 2560x1080. Mit dem 4.4.0-98 kernel funktioniert wie gesagt Wifi und interner und externer Monitor perfekt. Mit den beiden kerneln fuer die ich nun ein dmesg gepostet habe funktioniert das Wifi nicht und der externe Monitor wird scheinbar komplett ignoriert. In Display taucht er gar nicht auf. Da ist nur das interne Laptop Display welches aber auch nicht mit 1600x900 betrieben wird sondern mit 1280x720. Eine hoehere Aufloesung kann man nicht einstellen. [ 0.000000] microcode: CPU0 microcode updated early to revision 0xe, date = 2013-06-26
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-109-generic (buildd@lgw01-amd64-038) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5) ) #132-Ubuntu SMP Tue Jan 9 19:52:39 UTC 2018 (Ubuntu 4.4.0-109.132-generic 4.4.98)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-109-generic root=UUID=89e308b2-e5ca-485c-bb0f-7784c58bfcc0 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb27bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb27c000-0x00000000bb281fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb282000-0x00000000bb35efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb35f000-0x00000000bb370fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb371000-0x00000000bb3f1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb3f2000-0x00000000bb40efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb40f000-0x00000000bb46efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb46f000-0x00000000bb667fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb668000-0x00000000bb6e7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb6e8000-0x00000000bb70efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb70f000-0x00000000bb716fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb717000-0x00000000bb71efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb71f000-0x00000000bb76afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb76b000-0x00000000bb776fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb777000-0x00000000bb779fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb77a000-0x00000000bb780fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb781000-0x00000000bb781fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb782000-0x00000000bb78afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb78b000-0x00000000bb78bfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb78c000-0x00000000bb79efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb79f000-0x00000000bb7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb7ff000-0x00000000bb7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017bffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000180000000-0x00000001bbffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: LENOVO 4313CTO/4313CTO, BIOS 6MET92WW (1.52 ) 09/26/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1bc000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask F80000000 write-back
[ 0.000000] 4 base 180000000 mask FC0000000 write-back
[ 0.000000] 5 base 1BC000000 mask FFC000000 uncachable
[ 0.000000] 6 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 1, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 2, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 3, base: 4GB, range: 2GB, type WB
[ 0.000000] reg 4, base: 6GB, range: 1GB, type WB
[ 0.000000] reg 5, base: 7104MB, range: 64MB, type UC
[ 0.000000] reg 6, base: 3008MB, range: 64MB, type UC
[ 0.000000] total RAM covered: 6016M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 6 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3008MB, range: 64MB, type UC
[ 0.000000] reg 3, base: 4GB, range: 2GB, type WB
[ 0.000000] reg 4, base: 6GB, range: 1GB, type WB
[ 0.000000] reg 5, base: 7104MB, range: 64MB, type UC
[ 0.000000] e820: update [mem 0xbc000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbb800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f6890-0x000f689f] mapped at [ffff8800000f6890]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] BRK [0x02215000, 0x02215fff] PGTABLE
[ 0.000000] BRK [0x02216000, 0x02216fff] PGTABLE
[ 0.000000] BRK [0x02217000, 0x02217fff] PGTABLE
[ 0.000000] BRK [0x02218000, 0x02218fff] PGTABLE
[ 0.000000] BRK [0x02219000, 0x02219fff] PGTABLE
[ 0.000000] BRK [0x0221a000, 0x0221afff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35f38000-0x36f93fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6850 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x00000000BB7EF0C6 00009C (v01 LENOVO TP-6M 00001520 LTP 00000000)
[ 0.000000] ACPI: FACP 0x00000000BB7EF200 0000F4 (v04 LENOVO TP-6M 00001520 LNVO 00000001)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20150930/tbfadt-623)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20150930/tbfadt-704)
[ 0.000000] ACPI: DSDT 0x00000000BB7EF5D1 00F56A (v01 LENOVO TP-6M 00001520 MSFT 03000001)
[ 0.000000] ACPI: FACS 0x00000000BB6E7000 000040
[ 0.000000] ACPI: FACS 0x00000000BB6E7000 000040
[ 0.000000] ACPI: SSDT 0x00000000BB7EF3B4 00021D (v01 LENOVO TP-6M 00001520 MSFT 03000001)
[ 0.000000] ACPI: ECDT 0x00000000BB7FEB3B 000052 (v01 LENOVO TP-6M 00001520 LNVO 00000001)
[ 0.000000] ACPI: APIC 0x00000000BB7FEB8D 000084 (v01 LENOVO TP-6M 00001520 LNVO 00000001)
[ 0.000000] ACPI: MCFG 0x00000000BB7FEC49 00003C (v01 LENOVO TP-6M 00001520 LNVO 00000001)
[ 0.000000] ACPI: HPET 0x00000000BB7FEC85 000038 (v01 LENOVO TP-6M 00001520 LNVO 00000001)
[ 0.000000] ACPI: ASF! 0x00000000BB7FEDBE 0000A4 (v16 LENOVO TP-6M 00001520 PTL 00000001)
[ 0.000000] ACPI: SLIC 0x00000000BB7FEE62 000176 (v01 LENOVO TP-6M 00001520 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x00000000BB7FEFD8 000028 (v01 LENOVO TP-6M 00001520 LTP 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BB6E591A 00084B (v01 LENOVO TP-6M 00001520 INTL 20050513)
[ 0.000000] ACPI: TCPA 0x00000000BB78B000 000032 (v02 PTL CRESTLN 06040000 00005A52)
[ 0.000000] ACPI: DMAR 0x00000000BB781000 0000B8 (v01 INTEL CP_DALE 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BB779000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 0x00000000BB778000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 0x00000000BB777000 00049F (v01 PmRef ApTst 00003000 INTL 20060912)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001bbffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1bbff6000-0x1bbffafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001bbffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bb27bfff]
[ 0.000000] node 0: [mem 0x00000000bb282000-0x00000000bb35efff]
[ 0.000000] node 0: [mem 0x00000000bb40f000-0x00000000bb46efff]
[ 0.000000] node 0: [mem 0x00000000bb70f000-0x00000000bb716fff]
[ 0.000000] node 0: [mem 0x00000000bb71f000-0x00000000bb76afff]
[ 0.000000] node 0: [mem 0x00000000bb7ff000-0x00000000bb7fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000017bffffff]
[ 0.000000] node 0: [mem 0x0000000180000000-0x00000001bbffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bbffffff]
[ 0.000000] On node 0 totalpages: 1520555
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11921 pages used for memmap
[ 0.000000] DMA32 zone: 762894 pages, LIFO batch:31
[ 0.000000] Normal zone: 12032 pages used for memmap
[ 0.000000] Normal zone: 753664 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xbe000000-0xbfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb27c000-0xbb281fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb35f000-0xbb370fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb371000-0xbb3f1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb3f2000-0xbb40efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb46f000-0xbb667fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb668000-0xbb6e7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb6e8000-0xbb70efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb717000-0xbb71efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb76b000-0xbb776fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb777000-0xbb779fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb77a000-0xbb780fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb781000-0xbb781fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb782000-0xbb78afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb78b000-0xbb78bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb78c000-0xbb79efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb79f000-0xbb7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb800000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x17c000000-0x17fffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 34 pages/cpu @ffff8801bbc00000 s99544 r8192 d31528 u524288
[ 0.000000] pcpu-alloc: s99544 r8192 d31528 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1496517
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-109-generic root=UUID=89e308b2-e5ca-485c-bb0f-7784c58bfcc0 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5881648K/6082220K available (8485K kernel code, 1308K rwdata, 3988K rodata, 1508K init, 1316K bss, 200572K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.078 MHz processor
[ 0.000034] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.15 BogoMIPS (lpj=9576312)
[ 0.000036] pid_max: default: 32768 minimum: 301
[ 0.000043] ACPI: Core revision 20150930
[ 0.013940] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.013963] Security Framework initialized
[ 0.013966] Yama: becoming mindful.
[ 0.013985] AppArmor: AppArmor initialized
[ 0.014497] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.016809] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.017910] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.017923] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.018209] Initializing cgroup subsys io
[ 0.018214] Initializing cgroup subsys memory
[ 0.018222] Initializing cgroup subsys devices
[ 0.018225] Initializing cgroup subsys freezer
[ 0.018227] Initializing cgroup subsys net_cls
[ 0.018230] Initializing cgroup subsys perf_event
[ 0.018232] Initializing cgroup subsys net_prio
[ 0.018236] Initializing cgroup subsys hugetlb
[ 0.018238] Initializing cgroup subsys pids
[ 0.018257] CPU: Physical Processor ID: 0
[ 0.018258] CPU: Processor Core ID: 0
[ 0.018264] mce: CPU supports 9 MCE banks
[ 0.018275] CPU0: Thermal monitoring enabled (TM1)
[ 0.018283] process: using mwait in idle threads
[ 0.018287] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.018288] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.018626] Freeing SMP alternatives memory: 32K
[ 0.039145] ftrace: allocating 32171 entries in 126 pages
[ 0.054191] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.054195] smpboot: Max logical packages: 2
[ 0.054213] DMAR: Host address width 36
[ 0.054214] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.054221] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
[ 0.054223] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[ 0.054227] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c0000020230272 ecap 1000
[ 0.054228] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[ 0.054232] DMAR: dmar2: reg_base_addr fed93000 ver 1:0 cap c9008020630272 ecap 1000
[ 0.054234] DMAR: RMRR base: 0x000000bb6e9000 end: 0x000000bb6fffff
[ 0.054235] DMAR: RMRR base: 0x000000bdc00000 end: 0x000000bfffffff
[ 0.054739] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.201487] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz (family: 0x6, model: 0x25, stepping: 0x2)
[ 0.201507] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.201524] core: CPUID marked event: 'bus cycles' unavailable
[ 0.201527] ... version: 3
[ 0.201528] ... bit width: 48
[ 0.201529] ... generic registers: 4
[ 0.201530] ... value mask: 0000ffffffffffff
[ 0.201531] ... max period: 000000007fffffff
[ 0.201532] ... fixed-purpose events: 3
[ 0.201533] ... event mask: 000000070000000f
[ 0.202374] x86: Booting SMP configuration:
[ 0.202376] .... node #0, CPUs: #1
[ 0.204797] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.204909] #2
[ 0.205355] microcode: CPU2 microcode updated early to revision 0xe, date = 2013-06-26
[ 0.207559] #3
[ 0.209786] x86: Booted up 1 node, 4 CPUs
[ 0.209791] smpboot: Total of 4 processors activated (19152.62 BogoMIPS)
[ 0.212261] devtmpfs: initialized
[ 0.214858] evm: security.selinux
[ 0.214859] evm: security.SMACK64
[ 0.214860] evm: security.SMACK64EXEC
[ 0.214861] evm: security.SMACK64TRANSMUTE
[ 0.214862] evm: security.SMACK64MMAP
[ 0.214862] evm: security.ima
[ 0.214863] evm: security.capability
[ 0.214940] PM: Registering ACPI NVS region [mem 0xbb371000-0xbb3f1fff] (528384 bytes)
[ 0.214948] PM: Registering ACPI NVS region [mem 0xbb668000-0xbb6e7fff] (524288 bytes)
[ 0.214956] PM: Registering ACPI NVS region [mem 0xbb76b000-0xbb776fff] (49152 bytes)
[ 0.214958] PM: Registering ACPI NVS region [mem 0xbb77a000-0xbb780fff] (28672 bytes)
[ 0.214959] PM: Registering ACPI NVS region [mem 0xbb782000-0xbb78afff] (36864 bytes)
[ 0.214961] PM: Registering ACPI NVS region [mem 0xbb78c000-0xbb79efff] (77824 bytes)
[ 0.215044] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.215058] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.215159] pinctrl core: initialized pinctrl subsystem
[ 0.215284] RTC time: 11:01:45, date: 01/17/18
[ 0.215399] NET: Registered protocol family 16
[ 0.225496] cpuidle: using governor ladder
[ 0.237491] cpuidle: using governor menu
[ 0.237498] PCCT header not found.
[ 0.237581] Simple Boot Flag at 0x35 set to 0x1
[ 0.237610] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.237612] ACPI: bus type PCI registered
[ 0.237614] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.237680] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.237682] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.237700] PCI: Using configuration type 1 for base access
[ 0.249884] ACPI: Added _OSI(Module Device)
[ 0.249886] ACPI: Added _OSI(Processor Device)
[ 0.249887] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.249888] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.251101] ACPI : EC: EC description table is found, configuring boot EC
[ 0.251114] ACPI : EC: EC started
[ 0.254830] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.329491] ACPI: Dynamic OEM Table Load:
[ 0.329498] ACPI: SSDT 0xFFFF8801B3DD2800 00046F (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.329913] ACPI: Dynamic OEM Table Load:
[ 0.329918] ACPI: SSDT 0xFFFF8801B3DD3000 0006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.330493] ACPI: Dynamic OEM Table Load:
[ 0.330498] ACPI: SSDT 0xFFFF8801B3E02C00 000303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.330913] ACPI: Dynamic OEM Table Load:
[ 0.330917] ACPI: SSDT 0xFFFF8801B3E3C200 000119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.332728] ACPI: Interpreter enabled
[ 0.332746] ACPI: (supports S0 S3 S4 S5)
[ 0.332748] ACPI: Using IOAPIC for interrupt routing
[ 0.332770] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.338531] ACPI: Power Resource [PUBS] (on)
[ 0.339253] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[ 0.341382] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[ 0.343362] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.343443] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.343506] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.343587] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.343666] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.343745] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.343808] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.343888] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.343965] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
[ 0.343970] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.343974] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.344024] PCI host bridge to bus 0000:ff
[ 0.344027] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.344033] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.344087] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.344138] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.344181] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.344223] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.344265] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.344333] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.344336] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.344491] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.344563] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.344566] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.344568] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.344569] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.344734] PCI host bridge to bus 0000:00
[ 0.344737] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.344738] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.344740] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.344742] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.344743] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.344745] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.344747] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.344752] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.344772] DMAR: Disabling batched IOTLB flush on Ironlake
[ 0.344830] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[ 0.344844] pci 0000:00:02.0: reg 0x10: [mem 0xf2000000-0xf23fffff 64bit]
[ 0.344849] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.344854] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807]
[ 0.344972] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.345013] pci 0000:00:16.0: reg 0x10: [mem 0xf2827800-0xf282780f 64bit]
[ 0.345092] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.345162] pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002
[ 0.345198] pci 0000:00:16.3: reg 0x10: [io 0x1808-0x180f]
[ 0.345210] pci 0000:00:16.3: reg 0x14: [mem 0xf2624000-0xf2624fff]
[ 0.345354] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
[ 0.345389] pci 0000:00:19.0: reg 0x10: [mem 0xf2600000-0xf261ffff]
[ 0.345400] pci 0000:00:19.0: reg 0x14: [mem 0xf2625000-0xf2625fff]
[ 0.345411] pci 0000:00:19.0: reg 0x18: [io 0x1820-0x183f]
[ 0.345486] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.345521] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.345563] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.345598] pci 0000:00:1a.0: reg 0x10: [mem 0xf2828000-0xf28283ff]
[ 0.345687] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.345720] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.345765] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.345801] pci 0000:00:1b.0: reg 0x10: [mem 0xf2620000-0xf2623fff 64bit]
[ 0.345889] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.345936] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.345978] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.346074] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.346112] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.346154] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.346251] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.346289] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.346333] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[ 0.346428] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.346466] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.346507] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.346603] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.346641] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.346687] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.346721] pci 0000:00:1d.0: reg 0x10: [mem 0xf2828400-0xf28287ff]
[ 0.346809] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.346844] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.346885] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.347008] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
[ 0.347171] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[ 0.347206] pci 0000:00:1f.2: reg 0x10: [io 0x1860-0x1867]
[ 0.347217] pci 0000:00:1f.2: reg 0x14: [io 0x1814-0x1817]
[ 0.347227] pci 0000:00:1f.2: reg 0x18: [io 0x1818-0x181f]
[ 0.347238] pci 0000:00:1f.2: reg 0x1c: [io 0x1810-0x1813]
[ 0.347248] pci 0000:00:1f.2: reg 0x20: [io 0x1840-0x185f]
[ 0.347259] pci 0000:00:1f.2: reg 0x24: [mem 0xf2827000-0xf28277ff]
[ 0.347305] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.347371] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.347395] pci 0000:00:1f.3: reg 0x10: [mem 0xf2828800-0xf28288ff 64bit]
[ 0.347424] pci 0000:00:1f.3: reg 0x20: [io 0x1880-0x189f]
[ 0.347513] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.347550] pci 0000:00:1f.6: reg 0x10: [mem 0xf2626000-0xf2626fff 64bit]
[ 0.347722] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.347906] pci 0000:03:00.0: [10ec:8172] type 00 class 0x028000
[ 0.348101] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.348168] pci 0000:03:00.0: reg 0x14: [mem 0xf2400000-0xf2403fff]
[ 0.348776] pci 0000:03:00.0: supports D1 D2
[ 0.348778] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.353559] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.353567] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.353574] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.353662] acpiphp: Slot [1] registered
[ 0.353668] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.353673] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.353678] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.353685] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.353804] pci 0000:0d:00.0: [1180:e822] type 00 class 0x080500
[ 0.353845] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.353868] pci 0000:0d:00.0: reg 0x10: [mem 0xf2500000-0xf25000ff]
[ 0.354026] pci 0000:0d:00.0: supports D1 D2
[ 0.354027] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.354161] pci 0000:0d:00.1: [1180:e230] type 00 class 0x088000
[ 0.354208] pci 0000:0d:00.1: reg 0x10: [mem 0xf2500400-0xf25004ff]
[ 0.354352] pci 0000:0d:00.1: supports D1 D2
[ 0.354353] pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.354482] pci 0000:0d:00.3: [1180:e832] type 00 class 0x0c0010
[ 0.354529] pci 0000:0d:00.3: reg 0x10: [mem 0xf2500800-0xf2500fff]
[ 0.354674] pci 0000:0d:00.3: supports D1 D2
[ 0.354676] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.361567] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.361580] pci 0000:00:1c.4: bridge window [mem 0xf2500000-0xf25fffff]
[ 0.361664] pci 0000:00:1e.0: PCI bridge to [bus 0e] (subtractive decode)
[ 0.361677] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.361678] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.361680] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.361682] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.361683] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.361685] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
[ 0.363312] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.363388] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.363508] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.363510] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.363513] vgaarb: loaded
[ 0.363514] vgaarb: bridge control possible 0000:00:02.0
[ 0.363753] SCSI subsystem initialized
[ 0.363809] libata version 3.00 loaded.
[ 0.363833] ACPI: bus type USB registered
[ 0.363848] usbcore: registered new interface driver usbfs
[ 0.363858] usbcore: registered new interface driver hub
[ 0.363877] usbcore: registered new device driver usb
[ 0.364037] PCI: Using ACPI for IRQ routing
[ 0.373799] PCI: pci_cache_line_size set to 64 bytes
[ 0.374070] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.374072] e820: reserve RAM buffer [mem 0xbb27c000-0xbbffffff]
[ 0.374075] e820: reserve RAM buffer [mem 0xbb35f000-0xbbffffff]
[ 0.374077] e820: reserve RAM buffer [mem 0xbb46f000-0xbbffffff]
[ 0.374079] e820: reserve RAM buffer [mem 0xbb717000-0xbbffffff]
[ 0.374081] e820: reserve RAM buffer [mem 0xbb76b000-0xbbffffff]
[ 0.374083] e820: reserve RAM buffer [mem 0xbb800000-0xbbffffff]
[ 0.374213] NetLabel: Initializing
[ 0.374214] NetLabel: domain hash size = 128
[ 0.374215] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.374229] NetLabel: unlabeled traffic allowed by default
[ 0.374318] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.374322] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.376340] amd_nb: Cannot enumerate AMD northbridges
[ 0.376358] clocksource: Switched to clocksource hpet
[ 0.383327] AppArmor: AppArmor Filesystem Enabled
[ 0.383415] pnp: PnP ACPI init
[ 0.384909] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.384911] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.384913] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.384915] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.384917] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.384919] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.384921] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.384923] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.384924] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.384926] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.384928] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.384930] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.384932] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.384934] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.384939] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.385299] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.385302] system 00:01: [io 0x1000-0x107f] could not be reserved
[ 0.385304] system 00:01: [io 0x1180-0x11ff] has been reserved
[ 0.385307] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.385308] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.385310] system 00:01: [io 0x1600-0x1641] has been reserved
[ 0.385312] system 00:01: [io 0x1644-0x167f] could not be reserved
[ 0.385314] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.385316] system 00:01: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.385318] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.385320] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.385322] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.385324] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.385326] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.385327] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.385330] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.385387] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.385411] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.385435] pnp 00:04: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 0.386569] pnp: PnP ACPI: found 5 devices
[ 0.393205] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.393264] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.393280] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.393283] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.393289] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.393299] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.393302] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.393308] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.393313] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.393320] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.393326] pci 0000:00:1c.4: bridge window [mem 0xf2500000-0xf25fffff]
[ 0.393336] pci 0000:00:1e.0: PCI bridge to [bus 0e]
[ 0.393352] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.393354] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.393355] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.393357] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.393359] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.393360] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff window]
[ 0.393362] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.393364] pci_bus 0000:03: resource 1 [mem 0xf2400000-0xf24fffff]
[ 0.393366] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ 0.393367] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[ 0.393369] pci_bus 0000:05: resource 2 [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.393371] pci_bus 0000:0d: resource 1 [mem 0xf2500000-0xf25fffff]
[ 0.393373] pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7 window]
[ 0.393374] pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff window]
[ 0.393376] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.393378] pci_bus 0000:0e: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.393379] pci_bus 0000:0e: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.393381] pci_bus 0000:0e: resource 9 [mem 0xc0000000-0xfebfffff window]
[ 0.393416] NET: Registered protocol family 2
[ 0.393618] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.393838] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.394144] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.394187] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.394244] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.394345] NET: Registered protocol family 1
[ 0.394374] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.394788] PCI: CLS 64 bytes, default 64
[ 0.394853] Unpacking initramfs...
[ 0.667463] Freeing initrd memory: 16752K
[ 0.667577] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.667580] software IO TLB [mem 0xb727c000-0xbb27c000] (64MB) mapped at [ffff8800b727c000-ffff8800bb27bfff]
[ 0.667793] Scanning for low memory corruption every 60 seconds
[ 0.668192] audit: initializing netlink subsys (disabled)
[ 0.668212] audit: type=2000 audit(1516186904.472:1): initialized
[ 0.668608] Initialise system trusted keyring
[ 0.668734] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.670208] zbud: loaded
[ 0.670419] VFS: Disk quotas dquot_6.6.0
[ 0.670455] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.670719] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.670971] fuse init (API version 7.23)
[ 0.671114] Key type big_key registered
[ 0.671134] Allocating IMA MOK and blacklist keyrings.
[ 0.671577] Key type asymmetric registered
[ 0.671582] Asymmetric key parser 'x509' registered
[ 0.671620] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.671655] io scheduler noop registered
[ 0.671657] io scheduler deadline registered (default)
[ 0.671689] io scheduler cfq registered
[ 0.672223] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.672229] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.672258] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[ 0.672259] vesafb: scrolling: redraw
[ 0.672261] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.672279] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90001000000, using 4032k, total 4032k
[ 0.672409] Console: switching to colour frame buffer device 160x50
[ 0.672437] fb0: VESA VGA frame buffer device
[ 0.672453] intel_idle: MWAIT substates: 0x1120
[ 0.672454] intel_idle: v0.4.1 model 0x25
[ 0.672455] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.672921] ACPI: AC Adapter [AC] (on-line)
[ 0.672985] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.673130] ACPI: Lid Switch [LID]
[ 0.673170] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.673174] ACPI: Sleep Button [SLPB]
[ 0.673213] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.673215] ACPI: Power Button [PWRF]
[ 0.677724] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.677729] ACPI: Thermal Zone [THM0] (58 C)
[ 0.677800] GHES: HEST is not enabled!
[ 0.678021] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.678043] ACPI: Battery Slot [BAT0] (battery absent)
[ 0.701703] 0000:00:16.3: ttyS4 at I/O 0x1808 (irq = 17, base_baud = 115200) is a 16550A
[ 0.702318] Linux agpgart interface v0.103
[ 0.702460] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 0.702494] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.703119] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.703387] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.706741] loop: module loaded
[ 0.706964] libphy: Fixed MDIO Bus: probed
[ 0.706968] tun: Universal TUN/TAP device driver, 1.6
[ 0.706969] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.707013] PPP generic driver version 2.4.2
[ 0.707073] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.707077] ehci-pci: EHCI PCI platform driver
[ 0.707219] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.707227] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.707242] ehci-pci 0000:00:1a.0: debug port 2
[ 0.711176] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.711198] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf2828000
[ 0.724485] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.724560] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.724564] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.724567] usb usb1: Product: EHCI Host Controller
[ 0.724570] usb usb1: Manufacturer: Linux 4.4.0-109-generic ehci_hcd
[ 0.724573] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.724886] hub 1-0:1.0: USB hub found
[ 0.724906] hub 1-0:1.0: 3 ports detected
[ 0.725269] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.725278] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.725295] ehci-pci 0000:00:1d.0: debug port 2
[ 0.729241] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.729265] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf2828400
[ 0.740441] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.740561] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.740565] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.740568] usb usb2: Product: EHCI Host Controller
[ 0.740571] usb usb2: Manufacturer: Linux 4.4.0-109-generic ehci_hcd
[ 0.740573] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.740908] hub 2-0:1.0: USB hub found
[ 0.740923] hub 2-0:1.0: 3 ports detected
[ 0.741125] ehci-platform: EHCI generic platform driver
[ 0.741146] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.741154] ohci-pci: OHCI PCI platform driver
[ 0.741171] ohci-platform: OHCI generic platform driver
[ 0.741184] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.741278] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.745559] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.745567] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.746103] mousedev: PS/2 mouse device common for all mice
[ 0.746784] rtc_cmos 00:02: RTC can wake from S4
[ 0.747038] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.747077] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.747094] i2c /dev entries driver
[ 0.747238] device-mapper: uevent: version 1.0.3
[ 0.747528] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 0.747564] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.748675] NET: Registered protocol family 10
[ 0.749039] NET: Registered protocol family 17
[ 0.749061] Key type dns_resolver registered
[ 0.749530] microcode: CPU0 sig=0x20652, pf=0x10, revision=0xe
[ 0.749548] microcode: CPU1 sig=0x20652, pf=0x10, revision=0xe
[ 0.749558] microcode: CPU2 sig=0x20652, pf=0x10, revision=0xe
[ 0.749575] microcode: CPU3 sig=0x20652, pf=0x10, revision=0xe
[ 0.749669] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.750053] registered taskstats version 1
[ 0.750087] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.750090] Loading compiled-in X.509 certificates
[ 0.752163] Loaded X.509 cert 'Build time autogenerated kernel key: 96e61bd247bb6c4e82ca419795a98fcb171b0e99'
[ 0.752201] zswap: loaded using pool lzo/zbud
[ 0.757630] Key type trusted registered
[ 0.765726] Key type encrypted registered
[ 0.765743] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.765751] ima: No TPM chip found, activating TPM-bypass!
[ 0.765787] evm: HMAC attrs: 0x1
[ 0.766589] Magic number: 2:373:24
[ 0.766600] misc cpu_dma_latency: hash matches
[ 0.766779] rtc_cmos 00:02: setting system clock to 2018-01-17 11:01:45 UTC (1516186905)
[ 0.772524] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.772528] EDD information not available.
[ 0.772751] PM: Hibernation image not present or could not be loaded.
[ 0.775628] Freeing unused kernel memory: 1508K
[ 0.775632] Write protecting the kernel read-only data: 14336k
[ 0.776585] Freeing unused kernel memory: 1744K
[ 0.777204] Freeing unused kernel memory: 108K
[ 0.803000] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 0.803196] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 0.803231] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 0.803270] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 0.804064] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 0.804116] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 0.820608] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 0.820657] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 0.820678] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 0.821208] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 0.945209] pps_core: LinuxPPS API ver. 1 registered
[ 0.945216] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.949184] PTP clock support registered
[ 0.958214] ahci 0000:00:1f.2: version 3.0
[ 0.958487] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.958547] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
[ 0.958553] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 0.963463] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.963468] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.981744] scsi host0: ahci
[ 0.982030] scsi host1: ahci
[ 0.982463] scsi host2: ahci
[ 0.983222] scsi host3: ahci
[ 0.983470] scsi host4: ahci
[ 0.983692] scsi host5: ahci
[ 0.983840] ata1: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827100 irq 24
[ 0.983848] ata2: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827180 irq 24
[ 0.983852] ata3: DUMMY
[ 0.983855] ata4: DUMMY
[ 0.983860] ata5: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827300 irq 24
[ 0.983866] ata6: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827380 irq 24
[ 0.984199] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.036397] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.056446] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.166775] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:39:6b:bd
[ 1.166782] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.166842] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
[ 1.168691] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 1.168805] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.168810] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.169232] hub 1-1:1.0: USB hub found
[ 1.169381] hub 1-1:1.0: 6 ports detected
[ 1.188913] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.188918] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.189199] hub 2-1:1.0: USB hub found
[ 1.189359] hub 2-1:1.0: 8 ports detected
[ 1.300452] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.301517] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.301523] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.301527] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.301854] ata1.00: ATA-9: ADATA SP550, P0330AA, max UDMA/133
[ 1.301859] ata1.00: 468862128 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
[ 1.302690] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.302697] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.302701] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.303356] ata1.00: configured for UDMA/133
[ 1.303752] scsi 0:0:0:0: Direct-Access ATA ADATA SP550 0AA PQ: 0 ANSI: 5
[ 1.304364] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.304366] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 1.304369] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.304534] sd 0:0:0:0: [sda] Write Protect is off
[ 1.304540] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.304612] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.305313] sda: sda1 sda2 sda3
[ 1.306044] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.440415] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 1.460404] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.537526] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[ 1.537533] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.537536] usb 1-1.4: Product: Broadcom Bluetooth Device
[ 1.537540] usb 1-1.4: Manufacturer: Broadcom Corp
[ 1.537543] usb 1-1.4: SerialNumber: 002713954474
[ 1.555775] usb 2-1.1: New USB device found, idVendor=04b3, idProduct=3022
[ 1.555781] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.555785] usb 2-1.1: Product: IBM Preferred Pro USB Fingerprint Keyboard
[ 1.555789] usb 2-1.1: Manufacturer: Chicony
[ 1.556203] hub 2-1.1:1.0: USB hub found
[ 1.556475] hub 2-1.1:1.0: 2 ports detected
[ 1.608344] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[ 1.624398] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.626942] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.627150] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.628359] usb 2-1.2: new full-speed USB device number 4 using ehci-pci
[ 1.628728] ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, LT09, max UDMA/66
[ 1.631343] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.631566] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.633097] ata2.00: configured for UDMA/66
[ 1.634918] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT30N LT09 PQ: 0 ANSI: 5
[ 1.650590] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.650595] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.650826] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.650982] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.664387] tsc: Refined TSC clocksource calibration: 2393.998 MHz
[ 1.664394] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22821188adc, max_idle_ns: 440795282349 ns
[ 1.706617] usb 1-1.6: New USB device found, idVendor=17ef, idProduct=480f
[ 1.706623] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.706627] usb 1-1.6: Product: Integrated Camera
[ 1.706630] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 1.724148] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c52f
[ 1.724154] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.724158] usb 2-1.2: Product: USB Receiver
[ 1.724161] usb 2-1.2: Manufacturer: Logitech
[ 1.733564] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.740715] usbcore: registered new interface driver usbhid
[ 1.740719] usbhid: USB HID core driver
[ 1.744715] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C52F.0001/input/input6
[ 1.744952] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0
[ 1.745895] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:046D:C52F.0002/input/input7
[ 1.800863] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1
[ 1.827644] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[ 1.832377] usb 2-1.1.1: new full-speed USB device number 5 using ehci-pci
[ 1.915665] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000/0x0, board id: 0, fw id: 578367
[ 1.915674] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 1.928576] usb 2-1.1.1: New USB device found, idVendor=04b3, idProduct=3021
[ 1.928582] usb 2-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.928585] usb 2-1.1.1: Product: IBM Preferred Pro USB Fingerprint Keyboard
[ 1.928588] usb 2-1.1.1: Manufacturer: Chicony
[ 1.930846] input: Chicony IBM Preferred Pro USB Fingerprint Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.0/0003:04B3:3021.0003/input/input8
[ 1.964376] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.972075] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 1.984698] hid-generic 0003:04B3:3021.0003: input,hidraw2: USB HID v1.10 Keyboard [Chicony IBM Preferred Pro USB Fingerprint Keyboard] on usb-0000:00:1d.0-1.1.1/input0
[ 1.986022] hid-generic 0003:04B3:3021.0004: hiddev0,hidraw3: USB HID v1.10 Device [Chicony IBM Preferred Pro USB Fingerprint Keyboard] on usb-0000:00:1d.0-1.1.1/input1
[ 2.056376] usb 2-1.1.2: new full-speed USB device number 6 using ehci-pci
[ 2.150053] usb 2-1.1.2: New USB device found, idVendor=0483, idProduct=2016
[ 2.150059] usb 2-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.150063] usb 2-1.1.2: Product: Biometric Coprocessor
[ 2.150067] usb 2-1.1.2: Manufacturer: STMicroelectronics
[ 2.284373] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.664551] clocksource: Switched to clocksource tsc
[ 4.194967] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.354733] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 4.355045] systemd[1]: Detected architecture x86-64.
[ 4.355321] systemd[1]: Set hostname to <usul-T510>.
[ 4.513894] systemd[1]: Listening on Syslog Socket.
[ 4.514054] systemd[1]: Reached target Remote File Systems (Pre).
[ 4.514122] systemd[1]: Listening on udev Kernel Socket.
[ 4.514336] systemd[1]: Created slice System Slice.
[ 4.514463] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.514491] systemd[1]: Reached target User and Group Name Lookups.
[ 4.514636] systemd[1]: Listening on Journal Audit Socket.
[ 4.514661] systemd[1]: Reached target Remote File Systems.
[ 4.514805] systemd[1]: Created slice User and Session Slice.
[ 4.514898] systemd[1]: Listening on udev Control Socket.
[ 4.514961] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.515033] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.515130] systemd[1]: Listening on Journal Socket.
[ 4.524571] systemd[1]: Starting Load Kernel Modules...
[ 4.525679] systemd[1]: Started Braille Device Support.
[ 4.528970] systemd[1]: Starting Nameserver information manager...
[ 4.530573] systemd[1]: Starting Set console keymap...
[ 4.532099] systemd[1]: Starting Uncomplicated firewall...
[ 4.532186] systemd[1]: Reached target Slices.
[ 4.534082] systemd[1]: Started Read required files in advance.
[ 4.537151] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.538706] systemd[1]: Starting Journal Service...
[ 4.541362] systemd[1]: Mounting Debug File System...
[ 4.541628] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[ 4.549470] systemd[1]: Mounting Huge Pages File System...
[ 4.551111] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.551348] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.554185] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.556086] systemd[1]: Reached target Encrypted Volumes.
[ 4.560583] lp: driver loaded but no devices found
[ 4.563797] systemd[1]: Mounted Debug File System.
[ 4.566172] systemd[1]: Mounted POSIX Message Queue File System.
[ 4.568059] systemd[1]: Mounted Huge Pages File System.
[ 4.571600] ppdev: user-space parallel port driver
[ 4.573969] systemd[1]: Started Uncomplicated firewall.
[ 4.574812] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 4.581228] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
[ 4.582396] systemd[1]: Failed to start Load Kernel Modules.
[ 4.582727] systemd[1]: systemd-modules-load.service: Unit entered failed state.
[ 4.582798] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
[ 4.589500] systemd[1]: Started Nameserver information manager.
[ 4.683987] systemd[1]: Started Journal Service.
[ 4.879975] random: nonblocking pool is initialized
[ 4.889557] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 5.021270] systemd-journald[297]: Received request to flush runtime journal from PID 1
[ 5.515959] SSE version of gcm_enc/dec engaged.
[ 5.713777] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 6.899792] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 6.920616] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.141580] audit: type=1400 audit(1516186911.869:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3604/usr/lib/snapd/snap-confine" pid=796 comm="apparmor_parser"
[ 7.141600] audit: type=1400 audit(1516186911.869:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3604/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=796 comm="apparmor_parser"
[ 7.141614] audit: type=1400 audit(1516186911.869:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3604/usr/lib/snapd/snap-confine//snap_update_ns" pid=796 comm="apparmor_parser"
[ 7.144398] audit: type=1400 audit(1516186911.873:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=794 comm="apparmor_parser"
[ 7.144420] audit: type=1400 audit(1516186911.873:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=794 comm="apparmor_parser"
[ 7.144436] audit: type=1400 audit(1516186911.873:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=794 comm="apparmor_parser"
[ 7.144451] audit: type=1400 audit(1516186911.873:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=794 comm="apparmor_parser"
[ 7.152420] audit: type=1400 audit(1516186911.881:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3748/usr/lib/snapd/snap-confine" pid=797 comm="apparmor_parser"
[ 7.152443] audit: type=1400 audit(1516186911.881:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3748/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=797 comm="apparmor_parser"
[ 7.152460] audit: type=1400 audit(1516186911.881:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3748/usr/lib/snapd/snap-confine//snap_update_ns" pid=797 comm="apparmor_parser"
[ 7.213408] Adding 4194300k swap on /media/usul/Data/swap/swap0. Priority:-1 extents:229 across:31096828k SSFS
[ 7.983175] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 8.128049] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 8.344377] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 8.355765] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
[ 13.339660] Guest personality initialized and is inactive
[ 13.339795] VMCI host device registered (name=vmci, major=10, minor=55)
[ 13.339799] Initialized host personality
[ 13.391218] NET: Registered protocol family 40
[ 14.307370] audit_printk_skb: 93 callbacks suppressed
[ 14.307377] audit: type=1400 audit(1516186919.033:43): apparmor="ALLOWED" operation="exec" profile="snap.anbox.container-manager" name="/sbin/xtables-multi" pid=1404 comm="anbox-bridge.sh" requested_mask="x" denied_mask="x" fsuid=0 ouid=0 target="snap.anbox.container-manager//null-/sbin/xtables-multi"
[ 14.314467] audit: type=1400 audit(1516186919.041:44): apparmor="ALLOWED" operation="file_inherit" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/dev/null" pid=1404 comm="iptables" requested_mask="w" denied_mask="w" fsuid=0 ouid=0
[ 14.316015] audit: type=1400 audit(1516186919.045:45): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/etc/ld.so.cache" pid=1404 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 14.317733] audit: type=1400 audit(1516186919.045:46): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libip4tc.so.0.1.0" pid=1404 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 14.326523] audit: type=1400 audit(1516186919.053:47): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libip6tc.so.0.1.0" pid=1404 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 14.326876] audit: type=1400 audit(1516186919.053:48): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libxtables.so.11.0.0" pid=1404 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 14.332809] audit: type=1400 audit(1516186919.061:49): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libc-2.23.so" pid=1404 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 14.332980] audit: type=1400 audit(1516186919.061:50): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libdl-2.23.so" pid=1404 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 14.333308] audit: type=1400 audit(1516186919.061:51): apparmor="ALLOWED" operation="file_mprotect" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/sbin/xtables-multi" pid=1404 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 14.333341] audit: type=1400 audit(1516186919.061:52): apparmor="ALLOWED" operation="file_mprotect" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/ld-2.23.so" pid=1404 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 14.371378] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.440091] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 14.499275] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 0.000000] microcode: microcode updated early to revision 0xe, date = 2013-06-26
[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x504 with crng_init=0
[ 0.000000] Linux version 4.13.0-26-generic (buildd@lgw01-amd64-031) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5)) #29~16.04.2-Ubuntu SMP Tue Jan 9 22:00:44 UTC 2018 (Ubuntu 4.13.0-26.29~16.04.2-generic 4.13.13)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-26-generic root=UUID=89e308b2-e5ca-485c-bb0f-7784c58bfcc0 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb27bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb27c000-0x00000000bb281fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb282000-0x00000000bb35efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb35f000-0x00000000bb370fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb371000-0x00000000bb3f1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb3f2000-0x00000000bb40efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb40f000-0x00000000bb46efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb46f000-0x00000000bb667fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb668000-0x00000000bb6e7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb6e8000-0x00000000bb70efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb70f000-0x00000000bb716fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb717000-0x00000000bb71efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb71f000-0x00000000bb76afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb76b000-0x00000000bb776fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb777000-0x00000000bb779fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb77a000-0x00000000bb780fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb781000-0x00000000bb781fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb782000-0x00000000bb78afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb78b000-0x00000000bb78bfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb78c000-0x00000000bb79efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb79f000-0x00000000bb7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb7ff000-0x00000000bb7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017bffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000180000000-0x00000001bbffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: LENOVO 4313CTO/4313CTO, BIOS 6MET92WW (1.52 ) 09/26/2012
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1bc000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask F80000000 write-back
[ 0.000000] 4 base 180000000 mask FC0000000 write-back
[ 0.000000] 5 base 1BC000000 mask FFC000000 uncachable
[ 0.000000] 6 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] total RAM covered: 6016M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 6 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0xbc000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbb800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f6890-0x000f689f] mapped at [ffff8aea000f6890]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff8aea00098000] 98000 size 24576
[ 0.000000] BRK [0x161d2c000, 0x161d2cfff] PGTABLE
[ 0.000000] BRK [0x161d2d000, 0x161d2dfff] PGTABLE
[ 0.000000] BRK [0x161d2e000, 0x161d2efff] PGTABLE
[ 0.000000] BRK [0x161d2f000, 0x161d2ffff] PGTABLE
[ 0.000000] BRK [0x161d30000, 0x161d30fff] PGTABLE
[ 0.000000] BRK [0x161d31000, 0x161d31fff] PGTABLE
[ 0.000000] BRK [0x161d32000, 0x161d32fff] PGTABLE
[ 0.000000] BRK [0x161d33000, 0x161d33fff] PGTABLE
[ 0.000000] BRK [0x161d34000, 0x161d34fff] PGTABLE
[ 0.000000] BRK [0x161d35000, 0x161d35fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35bea000-0x36decfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6850 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x00000000BB7EF0C6 00009C (v01 LENOVO TP-6M 00001520 LTP 00000000)
[ 0.000000] ACPI: FACP 0x00000000BB7EF200 0000F4 (v04 LENOVO TP-6M 00001520 LNVO 00000001)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20170531/tbfadt-603)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20170531/tbfadt-708)
[ 0.000000] ACPI: DSDT 0x00000000BB7EF5D1 00F56A (v01 LENOVO TP-6M 00001520 MSFT 03000001)
[ 0.000000] ACPI: FACS 0x00000000BB6E7000 000040
[ 0.000000] ACPI: FACS 0x00000000BB6E7000 000040
[ 0.000000] ACPI: SSDT 0x00000000BB7EF3B4 00021D (v01 LENOVO TP-6M 00001520 MSFT 03000001)
[ 0.000000] ACPI: ECDT 0x00000000BB7FEB3B 000052 (v01 LENOVO TP-6M 00001520 LNVO 00000001)
[ 0.000000] ACPI: APIC 0x00000000BB7FEB8D 000084 (v01 LENOVO TP-6M 00001520 LNVO 00000001)
[ 0.000000] ACPI: MCFG 0x00000000BB7FEC49 00003C (v01 LENOVO TP-6M 00001520 LNVO 00000001)
[ 0.000000] ACPI: HPET 0x00000000BB7FEC85 000038 (v01 LENOVO TP-6M 00001520 LNVO 00000001)
[ 0.000000] ACPI: ASF! 0x00000000BB7FEDBE 0000A4 (v16 LENOVO TP-6M 00001520 PTL 00000001)
[ 0.000000] ACPI: SLIC 0x00000000BB7FEE62 000176 (v01 LENOVO TP-6M 00001520 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x00000000BB7FEFD8 000028 (v01 LENOVO TP-6M 00001520 LTP 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BB6E591A 00084B (v01 LENOVO TP-6M 00001520 INTL 20050513)
[ 0.000000] ACPI: TCPA 0x00000000BB78B000 000032 (v02 PTL CRESTLN 06040000 00005A52)
[ 0.000000] ACPI: DMAR 0x00000000BB781000 0000B8 (v01 INTEL CP_DALE 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BB779000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 0x00000000BB778000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 0x00000000BB777000 00049F (v01 PmRef ApTst 00003000 INTL 20060912)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001bbffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1bbfd3000-0x1bbffdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001bbffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bb27bfff]
[ 0.000000] node 0: [mem 0x00000000bb282000-0x00000000bb35efff]
[ 0.000000] node 0: [mem 0x00000000bb40f000-0x00000000bb46efff]
[ 0.000000] node 0: [mem 0x00000000bb70f000-0x00000000bb716fff]
[ 0.000000] node 0: [mem 0x00000000bb71f000-0x00000000bb76afff]
[ 0.000000] node 0: [mem 0x00000000bb7ff000-0x00000000bb7fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000017bffffff]
[ 0.000000] node 0: [mem 0x0000000180000000-0x00000001bbffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bbffffff]
[ 0.000000] On node 0 totalpages: 1520555
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11921 pages used for memmap
[ 0.000000] DMA32 zone: 762894 pages, LIFO batch:31
[ 0.000000] Normal zone: 12032 pages used for memmap
[ 0.000000] Normal zone: 753664 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000be000000-0x00000000bfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb27c000-0xbb281fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb35f000-0xbb370fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb371000-0xbb3f1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb3f2000-0xbb40efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb46f000-0xbb667fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb668000-0xbb6e7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb6e8000-0xbb70efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb717000-0xbb71efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb76b000-0xbb776fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb777000-0xbb779fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb77a000-0xbb780fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb781000-0xbb781fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb782000-0xbb78afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb78b000-0xbb78bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb78c000-0xbb79efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb79f000-0xbb7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb800000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x17c000000-0x17fffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ffff8aebbbc00000 s149784 r8192 d30440 u524288
[ 0.000000] pcpu-alloc: s149784 r8192 d30440 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1496517
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-26-generic root=UUID=89e308b2-e5ca-485c-bb0f-7784c58bfcc0 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5872584K/6082220K available (12300K kernel code, 2480K rwdata, 4004K rodata, 2372K init, 2368K bss, 209636K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 37814 entries in 148 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2393.957 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.91 BogoMIPS (lpj=9575828)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170531
[ 0.012877] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.012902] Security Framework initialized
[ 0.012903] Yama: becoming mindful.
[ 0.012924] AppArmor: AppArmor initialized
[ 0.015106] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.016295] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.016354] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.016392] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.016626] CPU: Physical Processor ID: 0
[ 0.016626] CPU: Processor Core ID: 0
[ 0.016635] mce: CPU supports 9 MCE banks
[ 0.016643] CPU0: Thermal monitoring enabled (TM1)
[ 0.016651] process: using mwait in idle threads
[ 0.016655] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.016655] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.016783] Freeing SMP alternatives memory: 36K
[ 0.020099] smpboot: Max logical packages: 2
[ 0.020117] DMAR: Host address width 36
[ 0.020118] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.020123] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
[ 0.020124] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[ 0.020127] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c0000020230272 ecap 1000
[ 0.020127] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[ 0.020130] DMAR: dmar2: reg_base_addr fed93000 ver 1:0 cap c9008020630272 ecap 1000
[ 0.020131] DMAR: RMRR base: 0x000000bb6e9000 end: 0x000000bb6fffff
[ 0.020132] DMAR: RMRR base: 0x000000bdc00000 end: 0x000000bfffffff
[ 0.020643] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064000] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz (family: 0x6, model: 0x25, stepping: 0x2)
[ 0.064000] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
[ 0.064000] core: CPUID marked event: 'bus cycles' unavailable
[ 0.064000] ... version: 3
[ 0.064000] ... bit width: 48
[ 0.064000] ... generic registers: 4
[ 0.064000] ... value mask: 0000ffffffffffff
[ 0.064000] ... max period: 000000007fffffff
[ 0.064000] ... fixed-purpose events: 3
[ 0.064000] ... event mask: 000000070000000f
[ 0.064000] Hierarchical SRCU implementation.
[ 0.064000] smp: Bringing up secondary CPUs ...
[ 0.064000] x86: Booting SMP configuration:
[ 0.064000] .... node #0, CPUs: #1
[ 0.064000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.064000] #2 #3
[ 0.068077] smp: Brought up 1 node, 4 CPUs
[ 0.068077] smpboot: Total of 4 processors activated (19151.65 BogoMIPS)
[ 0.070208] devtmpfs: initialized
[ 0.070208] x86/mm: Memory block size: 128MB
[ 0.072417] evm: security.selinux
[ 0.072418] evm: security.SMACK64
[ 0.072419] evm: security.SMACK64EXEC
[ 0.072419] evm: security.SMACK64TRANSMUTE
[ 0.072419] evm: security.SMACK64MMAP
[ 0.072420] evm: security.ima
[ 0.072420] evm: security.capability
[ 0.072438] PM: Registering ACPI NVS region [mem 0xbb371000-0xbb3f1fff] (528384 bytes)
[ 0.072438] PM: Registering ACPI NVS region [mem 0xbb668000-0xbb6e7fff] (524288 bytes)
[ 0.072438] PM: Registering ACPI NVS region [mem 0xbb76b000-0xbb776fff] (49152 bytes)
[ 0.072438] PM: Registering ACPI NVS region [mem 0xbb77a000-0xbb780fff] (28672 bytes)
[ 0.072438] PM: Registering ACPI NVS region [mem 0xbb782000-0xbb78afff] (36864 bytes)
[ 0.072438] PM: Registering ACPI NVS region [mem 0xbb78c000-0xbb79efff] (77824 bytes)
[ 0.072438] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.072438] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.072438] pinctrl core: initialized pinctrl subsystem
[ 0.072438] RTC time: 11:05:47, date: 01/17/18
[ 0.072438] NET: Registered protocol family 16
[ 0.072567] cpuidle: using governor ladder
[ 0.072567] cpuidle: using governor menu
[ 0.072567] PCCT header not found.
[ 0.072567] Simple Boot Flag at 0x35 set to 0x1
[ 0.072567] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.072567] ACPI: bus type PCI registered
[ 0.072567] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.072567] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.072567] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.072567] PCI: Using configuration type 1 for base access
[ 0.073156] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.073156] ACPI: Added _OSI(Module Device)
[ 0.073156] ACPI: Added _OSI(Processor Device)
[ 0.073156] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.073156] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.073156] ACPI: EC: EC started
[ 0.073156] ACPI: EC: interrupt blocked
[ 0.073156] ACPI: \: Used as first EC
[ 0.073156] ACPI: \: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.073156] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.078179] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.088089] ACPI: Dynamic OEM Table Load:
[ 0.088096] ACPI: SSDT 0xFFFF8AEBB439F000 00046F (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.088288] ACPI: Dynamic OEM Table Load:
[ 0.088293] ACPI: SSDT 0xFFFF8AEBB439C800 0006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.088656] ACPI: Dynamic OEM Table Load:
[ 0.088660] ACPI: SSDT 0xFFFF8AEBB3D78000 000303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.088853] ACPI: Dynamic OEM Table Load:
[ 0.088857] ACPI: SSDT 0xFFFF8AEBB3D2D200 000119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.090457] ACPI: Interpreter enabled
[ 0.090476] ACPI: (supports S0 S3 S4 S5)
[ 0.090478] ACPI: Using IOAPIC for interrupt routing
[ 0.090501] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.090944] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.099579] ACPI: Power Resource [PUBS] (on)
[ 0.102003] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[ 0.104105] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[ 0.107943] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.108029] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.108092] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.108172] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.108250] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.108329] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.108392] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.108471] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.108550] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
[ 0.108554] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.108558] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.108604] PCI host bridge to bus 0000:ff
[ 0.108606] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.108613] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.108663] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.108707] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.108745] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.108782] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.108819] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.108884] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.108887] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.109039] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.109110] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.109112] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.109113] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.109114] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.109284] PCI host bridge to bus 0000:00
[ 0.109286] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.109287] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.109288] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.109289] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.109290] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.109291] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.109293] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.109298] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.109316] DMAR: Disabling batched IOTLB flush on Ironlake
[ 0.109371] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[ 0.109381] pci 0000:00:02.0: reg 0x10: [mem 0xf2000000-0xf23fffff 64bit]
[ 0.109386] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.109390] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807]
[ 0.109512] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.109542] pci 0000:00:16.0: reg 0x10: [mem 0xf2827800-0xf282780f 64bit]
[ 0.109632] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.109701] pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002
[ 0.109727] pci 0000:00:16.3: reg 0x10: [io 0x1808-0x180f]
[ 0.109739] pci 0000:00:16.3: reg 0x14: [mem 0xf2624000-0xf2624fff]
[ 0.109895] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
[ 0.109921] pci 0000:00:19.0: reg 0x10: [mem 0xf2600000-0xf261ffff]
[ 0.109932] pci 0000:00:19.0: reg 0x14: [mem 0xf2625000-0xf2625fff]
[ 0.109943] pci 0000:00:19.0: reg 0x18: [io 0x1820-0x183f]
[ 0.110025] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.110094] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.110120] pci 0000:00:1a.0: reg 0x10: [mem 0xf2828000-0xf28283ff]
[ 0.110221] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.110294] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.110324] pci 0000:00:1b.0: reg 0x10: [mem 0xf2620000-0xf2623fff 64bit]
[ 0.110430] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.110512] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.110617] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.110699] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.110805] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.110884] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[ 0.110989] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.111068] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.111173] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.111255] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.111281] pci 0000:00:1d.0: reg 0x10: [mem 0xf2828400-0xf28287ff]
[ 0.111381] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.111451] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.111580] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
[ 0.111747] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[ 0.111773] pci 0000:00:1f.2: reg 0x10: [io 0x1860-0x1867]
[ 0.111784] pci 0000:00:1f.2: reg 0x14: [io 0x1814-0x1817]
[ 0.111793] pci 0000:00:1f.2: reg 0x18: [io 0x1818-0x181f]
[ 0.111803] pci 0000:00:1f.2: reg 0x1c: [io 0x1810-0x1813]
[ 0.111814] pci 0000:00:1f.2: reg 0x20: [io 0x1840-0x185f]
[ 0.111824] pci 0000:00:1f.2: reg 0x24: [mem 0xf2827000-0xf28277ff]
[ 0.111882] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.111946] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.111972] pci 0000:00:1f.3: reg 0x10: [mem 0xf2828800-0xf28288ff 64bit]
[ 0.112005] pci 0000:00:1f.3: reg 0x20: [io 0x1880-0x189f]
[ 0.112096] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.112126] pci 0000:00:1f.6: reg 0x10: [mem 0xf2626000-0xf2626fff 64bit]
[ 0.112305] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.112488] pci 0000:03:00.0: [10ec:8172] type 00 class 0x028000
[ 0.112679] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.112746] pci 0000:03:00.0: reg 0x14: [mem 0xf2400000-0xf2403fff]
[ 0.113470] pci 0000:03:00.0: supports D1 D2
[ 0.113471] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.128138] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.128143] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.128147] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.128228] acpiphp: Slot [1] registered
[ 0.128234] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.128238] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.128242] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.128249] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.128363] pci 0000:0d:00.0: [1180:e822] type 00 class 0x080500
[ 0.128387] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.128417] pci 0000:0d:00.0: reg 0x10: [mem 0xf2500000-0xf25000ff]
[ 0.128595] pci 0000:0d:00.0: supports D1 D2
[ 0.128596] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.128731] pci 0000:0d:00.1: [1180:e230] type 00 class 0x088000
[ 0.128767] pci 0000:0d:00.1: reg 0x10: [mem 0xf2500400-0xf25004ff]
[ 0.128934] pci 0000:0d:00.1: supports D1 D2
[ 0.128935] pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.129060] pci 0000:0d:00.3: [1180:e832] type 00 class 0x0c0010
[ 0.129096] pci 0000:0d:00.3: reg 0x10: [mem 0xf2500800-0xf2500fff]
[ 0.129197] pci 0000:0d:00.3: Enabling fixed DMA alias to 00.0
[ 0.129265] pci 0000:0d:00.3: supports D1 D2
[ 0.129266] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.140093] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.140105] pci 0000:00:1c.4: bridge window [mem 0xf2500000-0xf25fffff]
[ 0.140188] pci 0000:00:1e.0: PCI bridge to [bus 0e] (subtractive decode)
[ 0.140199] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.140201] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.140202] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.140203] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.140204] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.140205] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
[ 0.144004] ACPI: EC: EC stopped
[ 0.144004] ACPI: EC: EC started
[ 0.144004] ACPI: EC: interrupt blocked
[ 0.144004] ACPI: EC: interrupt unblocked
[ 0.144004] ACPI: EC: event unblocked
[ 0.144004] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.144004] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot ECDT EC to handle transactions and events
[ 0.144004] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.144004] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.144004] SCSI subsystem initialized
[ 0.144028] libata version 3.00 loaded.
[ 0.144030] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.144030] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.144030] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.144030] vgaarb: loaded
[ 0.144032] ACPI: bus type USB registered
[ 0.144046] usbcore: registered new interface driver usbfs
[ 0.144052] usbcore: registered new interface driver hub
[ 0.144069] usbcore: registered new device driver usb
[ 0.144099] EDAC MC: Ver: 3.0.0
[ 0.144220] PCI: Using ACPI for IRQ routing
[ 0.153496] PCI: pci_cache_line_size set to 64 bytes
[ 0.153765] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.153766] e820: reserve RAM buffer [mem 0xbb27c000-0xbbffffff]
[ 0.153768] e820: reserve RAM buffer [mem 0xbb35f000-0xbbffffff]
[ 0.153770] e820: reserve RAM buffer [mem 0xbb46f000-0xbbffffff]
[ 0.153772] e820: reserve RAM buffer [mem 0xbb717000-0xbbffffff]
[ 0.153774] e820: reserve RAM buffer [mem 0xbb76b000-0xbbffffff]
[ 0.153775] e820: reserve RAM buffer [mem 0xbb800000-0xbbffffff]
[ 0.153871] NetLabel: Initializing
[ 0.153872] NetLabel: domain hash size = 128
[ 0.153872] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.153894] NetLabel: unlabeled traffic allowed by default
[ 0.156064] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.156068] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.156068] clocksource: Switched to clocksource hpet
[ 0.168279] VFS: Disk quotas dquot_6.6.0
[ 0.168305] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.168429] AppArmor: AppArmor Filesystem Enabled
[ 0.168491] pnp: PnP ACPI init
[ 0.169978] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.169980] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.169981] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.169983] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.169984] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.169985] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.169987] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.169988] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.169989] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.169991] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.169992] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.169993] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.169995] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.169996] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.170000] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.170361] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.170362] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.170364] system 00:01: [io 0x1180-0x11ff] has been reserved
[ 0.170366] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.170367] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.170368] system 00:01: [io 0x1600-0x1641] has been reserved
[ 0.170370] system 00:01: [io 0x1644-0x167f] could not be reserved
[ 0.170372] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.170373] system 00:01: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.170375] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.170376] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.170377] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.170379] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.170382] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.170383] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.170386] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.170439] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.170461] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.170481] pnp 00:04: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 0.171649] pnp: PnP ACPI: found 5 devices
[ 0.178300] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.178361] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.178377] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.178380] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.178385] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.178395] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.178397] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.178403] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.178407] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.178414] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.178420] pci 0000:00:1c.4: bridge window [mem 0xf2500000-0xf25fffff]
[ 0.178429] pci 0000:00:1e.0: PCI bridge to [bus 0e]
[ 0.178443] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.178445] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.178446] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.178447] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.178448] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.178449] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff window]
[ 0.178451] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.178452] pci_bus 0000:03: resource 1 [mem 0xf2400000-0xf24fffff]
[ 0.178453] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ 0.178454] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[ 0.178455] pci_bus 0000:05: resource 2 [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.178457] pci_bus 0000:0d: resource 1 [mem 0xf2500000-0xf25fffff]
[ 0.178458] pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7 window]
[ 0.178459] pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff window]
[ 0.178460] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.178462] pci_bus 0000:0e: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.178463] pci_bus 0000:0e: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.178464] pci_bus 0000:0e: resource 9 [mem 0xc0000000-0xfebfffff window]
[ 0.178545] NET: Registered protocol family 2
[ 0.178743] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.178957] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.179258] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.179312] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.179370] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.179466] NET: Registered protocol family 1
[ 0.179494] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.179944] PCI: CLS 64 bytes, default 64
[ 0.179996] Unpacking initramfs...
[ 0.473084] Freeing initrd memory: 18444K
[ 0.473166] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.473169] software IO TLB [mem 0xb727c000-0xbb27c000] (64MB) mapped at [ffff8aeab727c000-ffff8aeabb27bfff]
[ 0.473412] Scanning for low memory corruption every 60 seconds
[ 0.473767] audit: initializing netlink subsys (disabled)
[ 0.473814] audit: type=2000 audit(1516187147.473:1): state=initialized audit_enabled=0 res=1
[ 0.474133] Initialise system trusted keyrings
[ 0.474143] Key type blacklist registered
[ 0.474179] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.475372] zbud: loaded
[ 0.475755] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.475903] fuse init (API version 7.26)
[ 0.477342] Key type asymmetric registered
[ 0.477343] Asymmetric key parser 'x509' registered
[ 0.477379] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.477417] io scheduler noop registered
[ 0.477418] io scheduler deadline registered
[ 0.477443] io scheduler cfq registered (default)
[ 0.478077] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[ 0.478078] vesafb: scrolling: redraw
[ 0.478079] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.478094] vesafb: framebuffer at 0xd0000000, mapped to 0xffffa4db41400000, using 4032k, total 4032k
[ 0.478198] Console: switching to colour frame buffer device 160x50
[ 0.478226] fb0: VESA VGA frame buffer device
[ 0.478238] intel_idle: MWAIT substates: 0x1120
[ 0.478239] intel_idle: v0.4.1 model 0x25
[ 0.478377] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.478735] ACPI: AC Adapter [AC] (on-line)
[ 0.478936] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.479112] ACPI: Lid Switch [LID]
[ 0.479188] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.479231] ACPI: Sleep Button [SLPB]
[ 0.479316] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.479360] ACPI: Power Button [PWRF]
[ 0.483558] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.484404] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.484407] ACPI: Thermal Zone [THM0] (48 C)
[ 0.484463] GHES: HEST is not enabled!
[ 0.484730] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.484762] ACPI: Battery Slot [BAT0] (battery absent)
[ 0.513727] 0000:00:16.3: ttyS4 at I/O 0x1808 (irq = 17, base_baud = 115200) is a 16550A
[ 0.514221] Linux agpgart interface v0.103
[ 0.516316] loop: module loaded
[ 0.516469] libphy: Fixed MDIO Bus: probed
[ 0.516470] tun: Universal TUN/TAP device driver, 1.6
[ 0.516573] PPP generic driver version 2.4.2
[ 0.516640] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.516643] ehci-pci: EHCI PCI platform driver
[ 0.516753] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.516759] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.516772] ehci-pci 0000:00:1a.0: debug port 2
[ 0.520717] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.520733] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf2828000
[ 0.536119] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.536202] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.536205] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.536207] usb usb1: Product: EHCI Host Controller
[ 0.536209] usb usb1: Manufacturer: Linux 4.13.0-26-generic ehci_hcd
[ 0.536211] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.536516] hub 1-0:1.0: USB hub found
[ 0.536530] hub 1-0:1.0: 3 ports detected
[ 0.536744] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.536749] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.536760] ehci-pci 0000:00:1d.0: debug port 2
[ 0.540695] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.540703] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf2828400
[ 0.556112] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.556172] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.556175] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.556177] usb usb2: Product: EHCI Host Controller
[ 0.556178] usb usb2: Manufacturer: Linux 4.13.0-26-generic ehci_hcd
[ 0.556180] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.556392] hub 2-0:1.0: USB hub found
[ 0.556405] hub 2-0:1.0: 3 ports detected
[ 0.556539] ehci-platform: EHCI generic platform driver
[ 0.556549] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.556552] ohci-pci: OHCI PCI platform driver
[ 0.556559] ohci-platform: OHCI generic platform driver
[ 0.556564] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.556617] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.560855] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.560859] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.561297] mousedev: PS/2 mouse device common for all mice
[ 0.562390] rtc_cmos 00:02: RTC can wake from S4
[ 0.562634] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.562671] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.562684] i2c /dev entries driver
[ 0.562780] device-mapper: uevent: version 1.0.3
[ 0.562931] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 0.563171] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.563660] NET: Registered protocol family 10
[ 0.565645] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.571545] Segment Routing with IPv6
[ 0.571566] NET: Registered protocol family 17
[ 0.571576] Key type dns_resolver registered
[ 0.572629] RAS: Correctable Errors collector initialized.
[ 0.572745] microcode: sig=0x20652, pf=0x10, revision=0xe
[ 0.572864] microcode: Microcode Update Driver: v2.2.
[ 0.572882] sched_clock: Marking stable (572856640, 0)->(762778086, -189921446)
[ 0.573191] registered taskstats version 1
[ 0.573201] Loading compiled-in X.509 certificates
[ 0.577137] Loaded X.509 cert 'Build time autogenerated kernel key: b1931af2efdddab2cc28005a48cb6f00161c7d17'
[ 0.577171] zswap: loaded using pool lzo/zbud
[ 0.581994] Key type big_key registered
[ 0.582001] Key type trusted registered
[ 0.585879] Key type encrypted registered
[ 0.585885] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.585890] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 0.585930] evm: HMAC attrs: 0x1
[ 0.586614] Magic number: 2:923:74
[ 0.586825] rtc_cmos 00:02: setting system clock to 2018-01-17 11:05:47 UTC (1516187147)
[ 0.592110] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.592111] EDD information not available.
[ 0.592247] PM: Hibernation image not present or could not be loaded.
[ 0.598006] Freeing unused kernel memory: 2372K
[ 0.598008] Write protecting the kernel read-only data: 18432k
[ 0.599096] Freeing unused kernel memory: 2024K
[ 0.599633] Freeing unused kernel memory: 92K
[ 0.604861] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.604862] x86/mm: Checking user space page tables
[ 0.609644] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.771362] pps_core: LinuxPPS API ver. 1 registered
[ 0.771365] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.774581] PTP clock support registered
[ 0.786279] ahci 0000:00:1f.2: version 3.0
[ 0.786658] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.786725] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
[ 0.786731] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 0.790452] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.790454] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.821569] scsi host0: ahci
[ 0.821805] scsi host1: ahci
[ 0.822023] scsi host2: ahci
[ 0.822242] scsi host3: ahci
[ 0.822957] scsi host4: ahci
[ 0.823831] scsi host5: ahci
[ 0.823956] ata1: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827100 irq 24
[ 0.823961] ata2: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827180 irq 24
[ 0.823963] ata3: DUMMY
[ 0.823964] ata4: DUMMY
[ 0.823968] ata5: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827300 irq 24
[ 0.823971] ata6: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827380 irq 24
[ 0.824376] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.864080] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.888096] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.981538] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:39:6b:bd
[ 0.981542] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 0.981600] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
[ 0.983143] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 1.012478] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.012481] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.012903] hub 1-1:1.0: USB hub found
[ 1.013090] hub 1-1:1.0: 6 ports detected
[ 1.040593] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.040596] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.040853] hub 2-1:1.0: USB hub found
[ 1.040922] hub 2-1:1.0: 8 ports detected
[ 1.139715] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.140770] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.140774] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.140778] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.141013] ata1.00: ATA-9: ADATA SP550, P0330AA, max UDMA/133
[ 1.141015] ata1.00: 468862128 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
[ 1.141670] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.141674] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.141677] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.142226] ata1.00: configured for UDMA/133
[ 1.142615] scsi 0:0:0:0: Direct-Access ATA ADATA SP550 0AA PQ: 0 ANSI: 5
[ 1.172395] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.172546] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 1.172549] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.172583] sd 0:0:0:0: [sda] Write Protect is off
[ 1.172587] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.172691] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.173688] sda: sda1 sda2 sda3
[ 1.174416] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.300080] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 1.328120] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.413355] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[ 1.413359] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.413361] usb 1-1.4: Product: Broadcom Bluetooth Device
[ 1.413363] usb 1-1.4: Manufacturer: Broadcom Corp
[ 1.413366] usb 1-1.4: SerialNumber: 002713954474
[ 1.439412] usb 2-1.1: New USB device found, idVendor=04b3, idProduct=3022
[ 1.439416] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.439419] usb 2-1.1: Product: IBM Preferred Pro USB Fingerprint Keyboard
[ 1.439421] usb 2-1.1: Manufacturer: Chicony
[ 1.440090] hub 2-1.1:1.0: USB hub found
[ 1.440478] hub 2-1.1:1.0: 2 ports detected
[ 1.487305] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.489866] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.490119] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.491671] ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, LT09, max UDMA/66
[ 1.494583] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.494882] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.496082] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[ 1.496404] ata2.00: configured for UDMA/66
[ 1.498252] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT30N LT09 PQ: 0 ANSI: 5
[ 1.500080] tsc: Refined TSC clocksource calibration: 2393.999 MHz
[ 1.500090] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22821267f49, max_idle_ns: 440795240327 ns
[ 1.520095] usb 2-1.2: new full-speed USB device number 4 using ehci-pci
[ 1.522380] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.522382] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.522654] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.522817] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.610405] usb 1-1.6: New USB device found, idVendor=17ef, idProduct=480f
[ 1.610409] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.610411] usb 1-1.6: Product: Integrated Camera
[ 1.610413] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 1.631998] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c52f
[ 1.632001] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.632004] usb 2-1.2: Product: USB Receiver
[ 1.632006] usb 2-1.2: Manufacturer: Logitech
[ 1.644896] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[ 1.645991] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.655672] usbcore: registered new interface driver usbhid
[ 1.655673] usbhid: USB HID core driver
[ 1.661468] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C52F.0001/input/input6
[ 1.661681] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0
[ 1.662025] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:046D:C52F.0002/input/input7
[ 1.720379] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1
[ 1.728102] usb 2-1.1.1: new full-speed USB device number 5 using ehci-pci
[ 1.732230] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 578367
[ 1.732237] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 1.787705] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 1.839398] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.839983] usb 2-1.1.1: New USB device found, idVendor=04b3, idProduct=3021
[ 1.839987] usb 2-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.839989] usb 2-1.1.1: Product: IBM Preferred Pro USB Fingerprint Keyboard
[ 1.839992] usb 2-1.1.1: Manufacturer: Chicony
[ 1.842244] input: Chicony IBM Preferred Pro USB Fingerprint Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.0/0003:04B3:3021.0003/input/input9
[ 1.900380] hid-generic 0003:04B3:3021.0003: input,hidraw2: USB HID v1.10 Keyboard [Chicony IBM Preferred Pro USB Fingerprint Keyboard] on usb-0000:00:1d.0-1.1.1/input0
[ 1.901806] hid-generic 0003:04B3:3021.0004: hiddev1,hidraw3: USB HID v1.10 Device [Chicony IBM Preferred Pro USB Fingerprint Keyboard] on usb-0000:00:1d.0-1.1.1/input1
[ 1.980107] usb 2-1.1.2: new full-speed USB device number 6 using ehci-pci
[ 2.089988] usb 2-1.1.2: New USB device found, idVendor=0483, idProduct=2016
[ 2.089991] usb 2-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.089993] usb 2-1.1.2: Product: Biometric Coprocessor
[ 2.089995] usb 2-1.1.2: Manufacturer: STMicroelectronics
[ 2.155589] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.524349] clocksource: Switched to clocksource tsc
[ 2.575937] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.862344] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8
[ 4.120045] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.284856] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 4.285167] systemd[1]: Detected architecture x86-64.
[ 4.285457] systemd[1]: Set hostname to <usul-T510>.
[ 4.441896] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.442155] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.442184] systemd[1]: Reached target User and Group Name Lookups.
[ 4.442309] systemd[1]: Listening on Journal Socket.
[ 4.442404] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.442553] systemd[1]: Listening on Journal Audit Socket.
[ 4.442616] systemd[1]: Listening on udev Kernel Socket.
[ 4.510811] lp: driver loaded but no devices found
[ 4.524861] ppdev: user-space parallel port driver
[ 4.691598] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 4.815825] systemd-journald[329]: Received request to flush runtime journal from PID 1
[ 5.283733] SSE version of gcm_enc/dec engaged.
[ 5.497579] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 6.693996] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.700337] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 7.074816] Adding 4194300k swap on /media/usul/Data/swap/swap0. Priority:-1 extents:229 across:31096828k SSFS
[ 7.682295] audit: type=1400 audit(1516187154.595:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=828 comm="apparmor_parser"
[ 7.684180] audit: type=1400 audit(1516187154.597:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=828 comm="apparmor_parser"
[ 7.685775] audit: type=1400 audit(1516187154.598:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=828 comm="apparmor_parser"
[ 7.687299] audit: type=1400 audit(1516187154.600:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=828 comm="apparmor_parser"
[ 7.873166] audit: type=1400 audit(1516187154.786:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3440/usr/lib/snapd/snap-confine" pid=829 comm="apparmor_parser"
[ 7.874220] audit: type=1400 audit(1516187154.787:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3440/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=829 comm="apparmor_parser"
[ 7.875056] audit: type=1400 audit(1516187154.788:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3440/usr/lib/snapd/snap-confine//snap_update_ns" pid=829 comm="apparmor_parser"
[ 7.963839] audit: type=1400 audit(1516187154.876:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3604/usr/lib/snapd/snap-confine" pid=830 comm="apparmor_parser"
[ 7.964975] audit: type=1400 audit(1516187154.878:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3604/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=830 comm="apparmor_parser"
[ 7.965758] audit: type=1400 audit(1516187154.878:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3604/usr/lib/snapd/snap-confine//snap_update_ns" pid=830 comm="apparmor_parser"
[ 14.985105] kauditd_printk_skb: 14 callbacks suppressed
[ 14.985107] audit: type=1400 audit(1516187161.898:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=837 comm="apparmor_parser"
[ 14.986557] audit: type=1400 audit(1516187161.899:27): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=837 comm="apparmor_parser"
[ 14.989758] audit: type=1400 audit(1516187161.902:28): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=837 comm="apparmor_parser"
[ 14.990842] audit: type=1400 audit(1516187161.903:29): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=837 comm="apparmor_parser"
[ 14.993585] audit: type=1400 audit(1516187161.906:30): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=837 comm="apparmor_parser"
[ 14.994650] audit: type=1400 audit(1516187161.907:31): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=837 comm="apparmor_parser"
[ 15.395248] audit: type=1400 audit(1516187162.308:32): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.anbox.collect-bug-info" pid=871 comm="apparmor_parser"
[ 15.405791] audit: type=1400 audit(1516187162.318:33): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.anbox.anbox" pid=874 comm="apparmor_parser"
[ 15.425283] audit: type=1400 audit(1516187162.338:34): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.anbox.container-manager" pid=872 comm="apparmor_parser"
[ 15.475355] audit: type=1400 audit(1516187162.388:35): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.core.hook.configure" pid=873 comm="apparmor_parser"
[ 15.922434] random: crng init done
[ 16.243220] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 16.440346] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 22.133465] Guest personality initialized and is inactive
[ 22.133567] VMCI host device registered (name=vmci, major=10, minor=55)
[ 22.133568] Initialized host personality
[ 22.182940] NET: Registered protocol family 40
[ 23.098042] kauditd_printk_skb: 7 callbacks suppressed
[ 23.098046] audit: type=1400 audit(1516187170.011:43): apparmor="ALLOWED" operation="exec" profile="snap.anbox.container-manager" name="/sbin/xtables-multi" pid=1401 comm="anbox-bridge.sh" requested_mask="x" denied_mask="x" fsuid=0 ouid=0 target="snap.anbox.container-manager//null-/sbin/xtables-multi"
[ 23.105234] audit: type=1400 audit(1516187170.018:44): apparmor="ALLOWED" operation="file_inherit" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/dev/null" pid=1401 comm="iptables" requested_mask="w" denied_mask="w" fsuid=0 ouid=0
[ 23.105242] audit: type=1400 audit(1516187170.018:45): apparmor="ALLOWED" operation="file_mmap" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/sbin/xtables-multi" pid=1401 comm="iptables" requested_mask="rm" denied_mask="rm" fsuid=0 ouid=0
[ 23.105248] audit: type=1400 audit(1516187170.018:46): apparmor="ALLOWED" operation="file_mmap" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/ld-2.23.so" pid=1401 comm="iptables" requested_mask="rm" denied_mask="rm" fsuid=0 ouid=0
[ 23.106786] audit: type=1400 audit(1516187170.019:47): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/etc/ld.so.cache" pid=1401 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 23.108576] audit: type=1400 audit(1516187170.021:48): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libip4tc.so.0.1.0" pid=1401 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 23.117238] audit: type=1400 audit(1516187170.030:49): apparmor="ALLOWED" operation="file_mmap" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libip4tc.so.0.1.0" pid=1401 comm="iptables" requested_mask="rm" denied_mask="rm" fsuid=0 ouid=0
[ 23.117479] audit: type=1400 audit(1516187170.030:50): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libip6tc.so.0.1.0" pid=1401 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 23.117489] audit: type=1400 audit(1516187170.030:51): apparmor="ALLOWED" operation="file_mmap" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libip6tc.so.0.1.0" pid=1401 comm="iptables" requested_mask="rm" denied_mask="rm" fsuid=0 ouid=0
[ 23.117837] audit: type=1400 audit(1516187170.030:52): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libxtables.so.11.0.0" pid=1401 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 23.161142] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 23.229563] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 23.296551] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
|
sirbender
(Themenstarter)
Anmeldungsdatum: 4. Februar 2011
Beiträge: 354
|
Fällt irgendwas ins Auge was erklären würde warum Wifi usw. bei den neuen Kerneln nicht funktioniert? Ich glaube ja, das Problem ist irgendwie, dass die früheren Einstellungen die normalerweise angewendet werden wenn man einen neuen Kernel installiert, vergessen wurden. Kann das sein?
|
Neko486
Anmeldungsdatum: 24. März 2017
Beiträge: 21
|
Guten Morgen, ich habe jetzt auf den ersten Blick auch nichts erkennen können. Poste nochmal bitte: | lspci -nnk | grep -i net -A2
|
| egrep -i 'fw|firm' /var/log/syslog
|
Dankeschön und Gruß Neko
|