und jetzt das endlos lange dmesg:
[ 0.000000] microcode: microcode updated early to revision 0x20, date = 2016-03-16
[ 0.000000] Linux version 4.10.0-20-generic (buildd@lcy01-05) (gcc version 6.3.0 20170406 (Ubuntu 6.3.0-12ubuntu2) ) #22-Ubuntu SMP Thu Apr 20 09:22:42 UTC 2017 (Ubuntu 4.10.0-20.22-generic 4.10.8)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-20-generic.efi.signed root=UUID=6fe30985-ce52-46a7-8159-f9102487f18c ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000094caffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000094cb0000-0x00000000960affff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000960b0000-0x000000009a6befff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009a6bf000-0x000000009aebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x93bef018-0x93c06c57] usable ==> usable
[ 0.000000] e820: update [mem 0x93bde018-0x93bee057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000093bde017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000093bde018-0x0000000093bee057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000093bee058-0x0000000093bef017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000093bef018-0x0000000093c06c57] usable
[ 0.000000] reserve setup_data: [mem 0x0000000093c06c58-0x0000000094caffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000094cb0000-0x00000000960affff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000960b0000-0x000000009a6befff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009a6bf000-0x000000009aebefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000009afff000-0x000000009affffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009b000000-0x000000009f9fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000025f5fffff] usable
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x9affe000 ACPI 2.0=0x9affe014 SMBIOS=0x9aebef98
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Acer Aspire V3-772G/VA70_HW, BIOS V1.13 10/11/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 0080000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 009B000000 mask 7FFF000000 uncachable
[ 0.000000] 3 base 009C000000 mask 7FFC000000 uncachable
[ 0.000000] 4 base 00FFC00000 mask 7FFFC00000 write-protect
[ 0.000000] 5 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 6 base 0200000000 mask 7F80000000 write-back
[ 0.000000] 7 base 025F600000 mask 7FFFE00000 uncachable
[ 0.000000] 8 base 025F800000 mask 7FFF800000 uncachable
[ 0.000000] 9 base 0260000000 mask 7FE0000000 uncachable
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff8f27c0082000] 82000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x202c28000, 0x202c28fff] PGTABLE
[ 0.000000] BRK [0x202c29000, 0x202c29fff] PGTABLE
[ 0.000000] BRK [0x202c2a000, 0x202c2afff] PGTABLE
[ 0.000000] BRK [0x202c2b000, 0x202c2bfff] PGTABLE
[ 0.000000] BRK [0x202c2c000, 0x202c2cfff] PGTABLE
[ 0.000000] BRK [0x202c2d000, 0x202c2dfff] PGTABLE
[ 0.000000] BRK [0x202c2e000, 0x202c2efff] PGTABLE
[ 0.000000] BRK [0x202c2f000, 0x202c2ffff] PGTABLE
[ 0.000000] BRK [0x202c30000, 0x202c30fff] PGTABLE
[ 0.000000] BRK [0x202c31000, 0x202c31fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3d700000-0x3fffafff]
[ 0.000000] Secure boot enabled
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000009AFFE014 000024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 0x000000009AFFE210 0000BC (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 0x000000009AFF5000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: DSDT 0x000000009AFDE000 013FF1 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: FACS 0x000000009AFAF000 000040
[ 0.000000] ACPI: ECDT 0x000000009AFFD000 0000C1 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: UEFI 0x000000009AFFC000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: FPDT 0x000000009AFFA000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MSDM 0x000000009AFF9000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000009AFF8000 000538 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000009AFF7000 000ABA (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: ASF! 0x000000009AFF6000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: HPET 0x000000009AFF4000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: APIC 0x000000009AFF3000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MCFG 0x000000009AFF2000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000009AFDC000 0013A4 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000009AFDB000 000172 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: BOOT 0x000000009AFDA000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: ASPT 0x000000009AFD9000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: DBGP 0x000000009AFD8000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000009AFD4000 003352 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000009AFCF000 003615 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: BGRT 0x000000009AFD3000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x25f5d5000-0x25f5fffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000025f5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000006efff]
[ 0.000000] node 0: [mem 0x0000000000070000-0x0000000000087fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000094caffff]
[ 0.000000] node 0: [mem 0x00000000960b0000-0x000000009a6befff]
[ 0.000000] node 0: [mem 0x000000009afff000-0x000000009affffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000025f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025f5fffff]
[ 0.000000] On node 0 totalpages: 2066502
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3974 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9739 pages used for memmap
[ 0.000000] DMA32 zone: 623296 pages, LIFO batch:31
[ 0.000000] Normal zone: 22488 pages used for memmap
[ 0.000000] Normal zone: 1439232 pages, LIFO batch:31
[ 0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED
[ 0.000000] Reserving Intel graphics memory at 0x000000009ba00000-0x000000009f9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x93bde000-0x93bdefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x93bee000-0x93beefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x93bef000-0x93beffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x93c06000-0x93c06fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x94cb0000-0x960affff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9a6bf000-0x9aebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff8f2a1f200000 s107800 r8192 d31464 u262144
[ 0.000000] pcpu-alloc: s107800 r8192 d31464 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2034190
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-20-generic.efi.signed root=UUID=6fe30985-ce52-46a7-8159-f9102487f18c ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7940344K/8266008K available (9061K kernel code, 1666K rwdata, 3816K rodata, 2228K init, 2364K bss, 325664K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:524544 nr_irqs:488 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2194.874 MHz processor
[ 0.000026] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.74 BogoMIPS (lpj=8779496)
[ 0.000028] pid_max: default: 32768 minimum: 301
[ 0.000037] ACPI: Core revision 20160930
[ 0.015228] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 0.032102] Security Framework initialized
[ 0.032103] Yama: becoming mindful.
[ 0.032122] AppArmor: AppArmor initialized
[ 0.032564] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.034126] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.034908] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.034916] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.035180] CPU: Physical Processor ID: 0
[ 0.035181] CPU: Processor Core ID: 0
[ 0.035185] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.035186] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.035189] mce: CPU supports 9 MCE banks
[ 0.035204] CPU0: Thermal monitoring enabled (TM1)
[ 0.035219] process: using mwait in idle threads
[ 0.035222] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.035222] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.035382] Freeing SMP alternatives memory: 32K
[ 0.038786] ftrace: allocating 34175 entries in 134 pages
[ 0.054628] smpboot: Max logical packages: 2
[ 0.055021] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.094708] TSC deadline timer enabled
[ 0.094710] smpboot: CPU0: Intel(R) Core(TM) i7-4702MQ CPU @ 2.20GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.094750] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 8: ae0000000040110a
[ 0.094753] mce: [Hardware Error]: TSC 0 ADDR ffb06d80 MISC 38a0000086
[ 0.094756] mce: [Hardware Error]: PROCESSOR 0:306c3 TIME 1493993274 SOCKET 0 APIC 0 microcode 20
[ 0.094774] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.094811] ... version: 3
[ 0.094811] ... bit width: 48
[ 0.094811] ... generic registers: 4
[ 0.094812] ... value mask: 0000ffffffffffff
[ 0.094813] ... max period: 00007fffffffffff
[ 0.094813] ... fixed-purpose events: 3
[ 0.094813] ... event mask: 000000070000000f
[ 0.095669] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.095683] smp: Bringing up secondary CPUs ...
[ 0.095746] x86: Booting SMP configuration:
[ 0.095747] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.107041] smp: Brought up 1 node, 8 CPUs
[ 0.107044] smpboot: Total of 8 processors activated (35117.98 BogoMIPS)
[ 0.114995] devtmpfs: initialized
[ 0.115050] x86/mm: Memory block size: 128MB
[ 0.117216] evm: security.selinux
[ 0.117216] evm: security.SMACK64
[ 0.117217] evm: security.SMACK64EXEC
[ 0.117217] evm: security.SMACK64TRANSMUTE
[ 0.117217] evm: security.SMACK64MMAP
[ 0.117218] evm: security.ima
[ 0.117218] evm: security.capability
[ 0.117276] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
[ 0.117346] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.117359] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.117414] pinctrl core: initialized pinctrl subsystem
[ 0.117507] RTC time: 14:07:54, date: 05/05/17
[ 0.117589] NET: Registered protocol family 16
[ 0.130651] cpuidle: using governor ladder
[ 0.146655] cpuidle: using governor menu
[ 0.146656] PCCT header not found.
[ 0.146697] Simple Boot Flag at 0x44 set to 0x1
[ 0.146707] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.146708] ACPI: bus type PCI registered
[ 0.146709] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.146766] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.146775] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.146787] PCI: Using configuration type 1 for base access
[ 0.146843] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.162765] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.162766] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.163039] ACPI: Added _OSI(Module Device)
[ 0.163040] ACPI: Added _OSI(Processor Device)
[ 0.163041] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.163042] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.163048] ACPI : EC: EC started
[ 0.164049] ACPI: \: Used as first EC
[ 0.164050] ACPI: \: GPE=0x1d, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.164051] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.164200] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.194709] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.196310] ACPI: Dynamic OEM Table Load:
[ 0.196319] ACPI: SSDT 0xFFFF8F2A15048C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120518)
[ 0.196721] ACPI: Dynamic OEM Table Load:
[ 0.196729] ACPI: SSDT 0xFFFF8F2A15774000 0005AA (v01 PmRef ApIst 00003000 INTL 20120518)
[ 0.197123] ACPI: Dynamic OEM Table Load:
[ 0.197129] ACPI: SSDT 0xFFFF8F2A1577DC00 000119 (v01 PmRef ApCst 00003000 INTL 20120518)
[ 0.198683] ACPI : EC: EC stopped
[ 0.198684] ACPI : EC: EC started
[ 0.198755] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.198756] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1d, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.198757] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.198758] ACPI: Interpreter enabled
[ 0.198795] ACPI: (supports S0 S3 S4 S5)
[ 0.198796] ACPI: Using IOAPIC for interrupt routing
[ 0.198820] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.208094] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.208098] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.208612] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.208613] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.209116] PCI host bridge to bus 0000:00
[ 0.209118] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.209120] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.209121] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.209122] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.209123] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.209123] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.209124] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.209125] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.209126] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.209127] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.209128] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.209129] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.209130] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.209131] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.209132] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.209132] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.209133] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[ 0.209135] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.209141] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 0.209333] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.209368] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.209552] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.209590] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[ 0.209600] pci 0000:00:02.0: reg 0x10: [mem 0xd3000000-0xd33fffff 64bit]
[ 0.209606] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.209610] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
[ 0.209810] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.209818] pci 0000:00:03.0: reg 0x10: [mem 0xd3610000-0xd3613fff 64bit]
[ 0.210026] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.210042] pci 0000:00:14.0: reg 0x10: [mem 0xd3600000-0xd360ffff 64bit]
[ 0.210099] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.210239] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.210272] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.210289] pci 0000:00:16.0: reg 0x10: [mem 0xd3618000-0xd361800f 64bit]
[ 0.210349] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.210525] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.210541] pci 0000:00:1a.0: reg 0x10: [mem 0xd361d000-0xd361d3ff]
[ 0.210620] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.210776] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.210812] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.210827] pci 0000:00:1b.0: reg 0x10: [mem 0xd3614000-0xd3617fff 64bit]
[ 0.210893] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.211036] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.211068] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.211129] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.211302] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.211336] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.211397] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.211568] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.211602] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[ 0.211663] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.211832] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.211870] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.211886] pci 0000:00:1d.0: reg 0x10: [mem 0xd361c000-0xd361c3ff]
[ 0.211965] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.212116] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.212150] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[ 0.212410] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 0.212423] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
[ 0.212429] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
[ 0.212436] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
[ 0.212442] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
[ 0.212449] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
[ 0.212456] pci 0000:00:1f.2: reg 0x24: [mem 0xd361b000-0xd361b7ff]
[ 0.212489] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.212655] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.212669] pci 0000:00:1f.3: reg 0x10: [mem 0xd3619000-0xd36190ff 64bit]
[ 0.212687] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
[ 0.212907] pci 0000:01:00.0: [10de:0fe4] type 00 class 0x030200
[ 0.212915] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[ 0.212923] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.212931] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[ 0.212936] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
[ 0.212942] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.213016] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.222703] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.222705] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.222707] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd2ffffff]
[ 0.222709] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.222770] pci 0000:07:00.0: [10ec:5209] type 00 class 0xff0000
[ 0.222790] pci 0000:07:00.0: reg 0x10: [mem 0xd1000000-0xd1000fff]
[ 0.222920] pci 0000:07:00.0: supports D1 D2
[ 0.222921] pci 0000:07:00.0: PME# supported from D1 D2 D3hot
[ 0.222960] pci 0000:07:00.0: System wakeup disabled by ACPI
[ 0.234711] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
[ 0.234714] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.234717] pci 0000:00:1c.0: bridge window [mem 0xd1000000-0xd1ffffff]
[ 0.234722] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 0.234780] pci 0000:0d:00.0: [168c:0034] type 00 class 0x028000
[ 0.234804] pci 0000:0d:00.0: reg 0x10: [mem 0xd3500000-0xd357ffff 64bit]
[ 0.234856] pci 0000:0d:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.234923] pci 0000:0d:00.0: supports D1 D2
[ 0.234924] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.234963] pci 0000:0d:00.0: System wakeup disabled by ACPI
[ 0.246714] pci 0000:00:1c.2: PCI bridge to [bus 0d]
[ 0.246719] pci 0000:00:1c.2: bridge window [mem 0xd3500000-0xd35fffff]
[ 0.246812] pci 0000:0e:00.0: [14e4:1692] type 00 class 0x020000
[ 0.246838] pci 0000:0e:00.0: reg 0x10: [mem 0xd3400000-0xd340ffff 64bit]
[ 0.246974] pci 0000:0e:00.0: PME# supported from D3hot D3cold
[ 0.247021] pci 0000:0e:00.0: System wakeup disabled by ACPI
[ 0.258752] pci 0000:00:1c.3: PCI bridge to [bus 0e]
[ 0.258756] pci 0000:00:1c.3: bridge window [mem 0xd3400000-0xd34fffff]
[ 0.259562] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.259604] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.259644] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.259684] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.259723] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.259762] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.259801] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.259840] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.260013] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.260077] ACPI : EC: event unblocked
[ 0.260083] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1d, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.260084] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.260363] SCSI subsystem initialized
[ 0.260394] libata version 3.00 loaded.
[ 0.260421] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.260423] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.260426] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.260426] vgaarb: loaded
[ 0.260443] ACPI: bus type USB registered
[ 0.260456] usbcore: registered new interface driver usbfs
[ 0.260463] usbcore: registered new interface driver hub
[ 0.260483] usbcore: registered new device driver usb
[ 0.260551] Registered efivars operations
[ 0.934379] PCI: Using ACPI for IRQ routing
[ 0.940047] PCI: pci_cache_line_size set to 64 bytes
[ 0.940124] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[ 0.940125] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.940125] e820: reserve RAM buffer [mem 0x93bde018-0x93ffffff]
[ 0.940126] e820: reserve RAM buffer [mem 0x93bef018-0x93ffffff]
[ 0.940127] e820: reserve RAM buffer [mem 0x94cb0000-0x97ffffff]
[ 0.940128] e820: reserve RAM buffer [mem 0x9a6bf000-0x9bffffff]
[ 0.940129] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[ 0.940130] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
[ 0.940211] NetLabel: Initializing
[ 0.940212] NetLabel: domain hash size = 128
[ 0.940212] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.940226] NetLabel: unlabeled traffic allowed by default
[ 0.940311] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.940315] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.942334] clocksource: Switched to clocksource hpet
[ 0.949454] VFS: Disk quotas dquot_6.6.0
[ 0.949472] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.949568] AppArmor: AppArmor Filesystem Enabled
[ 0.949612] pnp: PnP ACPI init
[ 0.949776] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.949777] system 00:00: [io 0xffff] has been reserved
[ 0.949778] system 00:00: [io 0xffff] has been reserved
[ 0.949779] system 00:00: [io 0xffff] has been reserved
[ 0.949781] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.949782] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.949785] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.949827] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.949829] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.949851] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.949899] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.949901] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.949932] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.949956] pnp 00:05: Plug and Play ACPI device, IDs SYN1b66 SYN1b00 SYN0002 PNP0f13 (active)
[ 0.950091] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.950092] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.950093] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.950094] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.950096] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.950097] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.950098] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.950099] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.950101] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.950102] system 00:06: [mem 0x9fa20000-0x9fa20fff] has been reserved
[ 0.950103] system 00:06: [mem 0x9fa10000-0x9fa1ffff] has been reserved
[ 0.950105] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.950605] pnp: PnP ACPI: found 7 devices
[ 0.956520] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.956525] pci 0000:0d:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.956554] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
[ 0.956556] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.956557] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.956560] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd2ffffff]
[ 0.956562] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.956566] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
[ 0.956567] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.956571] pci 0000:00:1c.0: bridge window [mem 0xd1000000-0xd1ffffff]
[ 0.956574] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 0.956579] pci 0000:0d:00.0: BAR 6: assigned [mem 0xd3580000-0xd358ffff pref]
[ 0.956580] pci 0000:00:1c.2: PCI bridge to [bus 0d]
[ 0.956584] pci 0000:00:1c.2: bridge window [mem 0xd3500000-0xd35fffff]
[ 0.956591] pci 0000:00:1c.3: PCI bridge to [bus 0e]
[ 0.956594] pci 0000:00:1c.3: bridge window [mem 0xd3400000-0xd34fffff]
[ 0.956602] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.956603] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.956604] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.956605] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.956606] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.956606] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.956607] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.956608] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.956609] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.956610] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.956611] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.956612] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.956613] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.956614] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.956615] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.956616] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.956617] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff window]
[ 0.956618] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.956619] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd2ffffff]
[ 0.956620] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.956621] pci_bus 0000:07: resource 0 [io 0x3000-0x3fff]
[ 0.956622] pci_bus 0000:07: resource 1 [mem 0xd1000000-0xd1ffffff]
[ 0.956623] pci_bus 0000:07: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 0.956624] pci_bus 0000:0d: resource 1 [mem 0xd3500000-0xd35fffff]
[ 0.956625] pci_bus 0000:0e: resource 1 [mem 0xd3400000-0xd34fffff]
[ 0.956727] NET: Registered protocol family 2
[ 0.956893] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.957019] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.957199] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.957224] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.957252] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.957305] NET: Registered protocol family 1
[ 0.957316] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.998491] PCI: CLS 64 bytes, default 64
[ 0.998534] Unpacking initramfs...
[ 1.653511] Freeing initrd memory: 41964K
[ 1.653514] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.653517] software IO TLB [mem 0x8f0c0000-0x930c0000] (64MB) mapped at [ffff8f284f0c0000-ffff8f28530bffff]
[ 1.653814] Scanning for low memory corruption every 60 seconds
[ 1.654146] audit: initializing netlink subsys (disabled)
[ 1.654181] audit: type=2000 audit(1493993275.632:1): initialized
[ 1.654579] Initialise system trusted keyrings
[ 1.654663] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 1.655994] zbud: loaded
[ 1.656415] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.656587] fuse init (API version 7.26)
[ 1.657601] Key type asymmetric registered
[ 1.657602] Asymmetric key parser 'x509' registered
[ 1.657631] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.657658] io scheduler noop registered
[ 1.657659] io scheduler deadline registered
[ 1.657665] io scheduler cfq registered (default)
[ 1.658397] pcieport 0000:00:01.0: Signaling PME with IRQ 24
[ 1.658413] pcieport 0000:00:1c.0: Signaling PME with IRQ 25
[ 1.658429] pcieport 0000:00:1c.2: Signaling PME with IRQ 26
[ 1.658445] pcieport 0000:00:1c.3: Signaling PME with IRQ 27
[ 1.658460] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1.658516] efifb: probing for efifb
[ 1.658526] efifb: framebuffer at 0xc0000000, using 5628k, total 5625k
[ 1.658527] efifb: mode is 1600x900x32, linelength=6400, pages=1
[ 1.658527] efifb: scrolling: redraw
[ 1.658528] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.658611] Console: switching to colour frame buffer device 200x56
[ 1.658629] fb0: EFI VGA frame buffer device
[ 1.658635] intel_idle: MWAIT substates: 0x42120
[ 1.658636] intel_idle: v0.4.1 model 0x3C
[ 1.658941] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.659030] ACPI: AC Adapter [AC0] (on-line)
[ 1.659088] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input0
[ 1.659091] ACPI: Power Button [PWRB]
[ 1.659120] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0E:00/input/input1
[ 1.659121] ACPI: Sleep Button [SLPB]
[ 1.670450] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 1.682427] ACPI: Lid Switch [LID]
[ 1.682471] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.682473] ACPI: Power Button [PWRF]
[ 1.683297] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.683412] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.683412] ACPI: Thermal Zone [THRM] (55 C)
[ 1.683441] GHES: HEST is not enabled!
[ 1.683507] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.684723] Linux agpgart interface v0.103
[ 1.686871] loop: module loaded
[ 1.687014] libphy: Fixed MDIO Bus: probed
[ 1.687015] tun: Universal TUN/TAP device driver, 1.6
[ 1.687015] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.687049] PPP generic driver version 2.4.2
[ 1.687091] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.687093] ehci-pci: EHCI PCI platform driver
[ 1.687195] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.687199] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.687209] ehci-pci 0000:00:1a.0: debug port 2
[ 1.691109] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.691120] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd361d000
[ 1.706361] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.706392] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.706394] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.706395] usb usb1: Product: EHCI Host Controller
[ 1.706396] usb usb1: Manufacturer: Linux 4.10.0-20-generic ehci_hcd
[ 1.706396] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.706557] hub 1-0:1.0: USB hub found
[ 1.706560] hub 1-0:1.0: 2 ports detected
[ 1.706838] ACPI: Battery Slot [BAT0] (battery present)
[ 1.706977] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.706980] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.706989] ehci-pci 0000:00:1d.0: debug port 2
[ 1.710883] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.710891] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd361c000
[ 1.726361] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.726390] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.726391] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.726392] usb usb2: Product: EHCI Host Controller
[ 1.726393] usb usb2: Manufacturer: Linux 4.10.0-20-generic ehci_hcd
[ 1.726393] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.726501] hub 2-0:1.0: USB hub found
[ 1.726504] hub 2-0:1.0: 2 ports detected
[ 1.726606] ehci-platform: EHCI generic platform driver
[ 1.726613] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.726615] ohci-pci: OHCI PCI platform driver
[ 1.726622] ohci-platform: OHCI generic platform driver
[ 1.726627] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.726731] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.726735] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.727811] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 1.727815] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.727884] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.727885] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.727886] usb usb3: Product: xHCI Host Controller
[ 1.727886] usb usb3: Manufacturer: Linux 4.10.0-20-generic xhci-hcd
[ 1.727887] usb usb3: SerialNumber: 0000:00:14.0
[ 1.727991] hub 3-0:1.0: USB hub found
[ 1.728006] hub 3-0:1.0: 14 ports detected
[ 1.731252] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.731254] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.731286] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.731287] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.731288] usb usb4: Product: xHCI Host Controller
[ 1.731289] usb usb4: Manufacturer: Linux 4.10.0-20-generic xhci-hcd
[ 1.731289] usb usb4: SerialNumber: 0000:00:14.0
[ 1.731394] hub 4-0:1.0: USB hub found
[ 1.731403] hub 4-0:1.0: 4 ports detected
[ 1.731734] usb: port power management may be unreliable
[ 1.732131] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.734417] i8042: Detected active multiplexing controller, rev 1.1
[ 1.736553] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.736556] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.736583] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.736603] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.736624] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.736758] mousedev: PS/2 mouse device common for all mice
[ 1.737014] rtc_cmos 00:02: RTC can wake from S4
[ 1.737116] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.737137] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.737142] i2c /dev entries driver
[ 1.737186] device-mapper: uevent: version 1.0.3
[ 1.737240] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 1.737245] intel_pstate: Intel P-state driver initializing
[ 1.737572] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.737573] EFI Variables Facility v0.08 2004-May-17
[ 1.747301] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.766593] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 1.766594] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 1.969444] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 1.969445] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 2.034392] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.054390] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.058391] usb 3-2: new full-speed USB device number 2 using xhci_hcd
[ 2.182825] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 2.182826] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.183093] hub 1-1:1.0: USB hub found
[ 2.183178] hub 1-1:1.0: 6 ports detected
[ 2.191364] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 2.191365] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 2.200904] usb 3-2: New USB device found, idVendor=24ae, idProduct=2000
[ 2.200905] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.200906] usb 3-2: Product: RAPOO 2.4G Wireless Device
[ 2.200907] usb 3-2: Manufacturer: RAPOO
[ 2.202693] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 2.202694] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.202963] hub 2-1:1.0: USB hub found
[ 2.203069] hub 2-1:1.0: 8 ports detected
[ 2.318397] usb 3-3: new high-speed USB device number 3 using xhci_hcd
[ 2.391646] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 2.391647] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 2.406060] NET: Registered protocol family 10
[ 2.409854] Segment Routing with IPv6
[ 2.409869] NET: Registered protocol family 17
[ 2.409876] Key type dns_resolver registered
[ 2.410567] microcode: sig=0x306c3, pf=0x10, revision=0x20
[ 2.410673] microcode: Microcode Update Driver: v2.2.
[ 2.431903] EFI: Loaded cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to '.builtin_trusted_keys'
[ 2.431919] EFI: Loaded cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to '.builtin_trusted_keys'
[ 2.433380] EFI: Loaded cert 'Pegatron SecureFlash: fef77a732921f0854b4d5405bdb3276d' linked to '.builtin_trusted_keys'
[ 2.433396] EFI: Loaded cert 'Acer: c4f0474ae6b5e67a509d99132f49a4ec13f7ac68' linked to '.builtin_trusted_keys'
[ 2.458982] usb 3-3: New USB device found, idVendor=2040, idProduct=0265
[ 2.458983] usb 3-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.458984] usb 3-3: Product: dualHD
[ 2.458984] usb 3-3: Manufacturer: HCW
[ 2.458985] usb 3-3: SerialNumber: 0011512149
[ 2.473572] EFI: Loaded cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to '.builtin_trusted_keys'
[ 2.480037] registered taskstats version 1
[ 2.480044] Loading compiled-in X.509 certificates
[ 2.482328] Loaded X.509 cert 'Build time autogenerated kernel key: 5a344f00a2ade11b74c5514c572851389bac3b8f'
[ 2.482349] zswap: loaded using pool lzo/zbud
[ 2.491649] Key type big_key registered
[ 2.491652] Key type trusted registered
[ 2.492959] Key type encrypted registered
[ 2.492962] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.492964] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 2.492980] evm: HMAC attrs: 0x1
[ 2.493409] Magic number: 1:916:130
[ 2.493470] acpi device:05: hash matches
[ 2.493472] acpi PNP0C02:02: hash matches
[ 2.493530] rtc_cmos 00:02: setting system clock to 2017-05-05 14:07:57 UTC (1493993277)
[ 2.493692] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.493692] EDD information not available.
[ 2.495260] Freeing unused kernel memory: 2228K
[ 2.495261] Write protecting the kernel read-only data: 14336k
[ 2.495583] Freeing unused kernel memory: 1164K
[ 2.496087] Freeing unused kernel memory: 280K
[ 2.500891] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.509818] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.509881] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.509889] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.510405] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.510431] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.511310] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.511320] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.511352] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.511383] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.511410] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.528365] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
[ 2.529421] wmi: Mapper loaded
[ 2.539475] pps_core: LinuxPPS API ver. 1 registered
[ 2.539476] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.539652] rtsx_pci 0000:07:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 29
[ 2.540988] PTP clock support registered
[ 2.542002] ahci 0000:00:1f.2: version 3.0
[ 2.542037] [drm] Initialized
[ 2.542157] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x25 impl SATA mode
[ 2.542158] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 2.543551] tg3.c:v3.137 (May 11, 2014)
[ 2.562796] scsi host0: ahci
[ 2.562891] scsi host1: ahci
[ 2.562965] scsi host2: ahci
[ 2.563030] scsi host3: ahci
[ 2.563093] scsi host4: ahci
[ 2.563148] scsi host5: ahci
[ 2.563177] ata1: SATA max UDMA/133 abar m2048@0xd361b000 port 0xd361b100 irq 30
[ 2.563178] ata2: DUMMY
[ 2.563179] ata3: SATA max UDMA/133 abar m2048@0xd361b000 port 0xd361b200 irq 30
[ 2.563179] ata4: DUMMY
[ 2.563180] ata5: DUMMY
[ 2.563181] ata6: SATA max UDMA/133 abar m2048@0xd361b000 port 0xd361b380 irq 30
[ 2.565191] [drm] Memory usable by graphics device = 2048M
[ 2.565193] checking generic (c0000000 57f000) vs hw (c0000000 10000000)
[ 2.565194] fb: switching to inteldrmfb from EFI VGA
[ 2.565220] Console: switching to colour dummy device 80x25
[ 2.565301] [drm] Replacing VGA console driver
[ 2.566492] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 2.566627] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 2.566721] i915 0000:00:02.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 2.566738] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 2.566764] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 2.566842] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 2.566844] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[ 2.566857] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 2.566950] nouveau 0000:01:00.0: NVIDIA GK107 (0e7240a2)
[ 2.570441] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.570442] [drm] Driver supports precise vblank timestamp query.
[ 2.573891] libphy: tg3 mdio bus: probed
[ 2.582380] usb 3-5: new high-speed USB device number 4 using xhci_hcd
[ 2.584472] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.586827] nouveau 0000:01:00.0: bios: version 80.07.a6.00.0d
[ 2.604723] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 2.604724] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 2.656948] Broadcom BCM57780 e00:01: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=e00:01, irq=-1)
[ 2.657219] tg3 0000:0e:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 0c:54:a5:3c:e0:50
[ 2.657221] tg3 0000:0e:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.657222] tg3 0000:0e:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.657951] tg3 0000:0e:00.0 enp14s0: renamed from eth0
[ 2.670408] tsc: Refined TSC clocksource calibration: 2194.917 MHz
[ 2.670413] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa37107ca2, max_idle_ns: 440795258165 ns
[ 2.684691] nouveau 0000:01:00.0: fb: 4096 MiB DDR3
[ 2.684785] nouveau 0000:01:00.0: bus: MMIO write of 00000002 FAULT at 4188ac [ IBUS ]
[ 2.743001] vga_switcheroo: enabled
[ 2.743138] [TTM] Zone kernel: Available graphics memory: 4024842 kiB
[ 2.743138] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.743139] [TTM] Initializing pool allocator
[ 2.743152] [TTM] Initializing DMA pool allocator
[ 2.743165] nouveau 0000:01:00.0: DRM: VRAM: 4096 MiB
[ 2.743165] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 2.743167] nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid
[ 2.743168] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 2.743169] nouveau 0000:01:00.0: DRM: Pointer to flat panel table invalid
[ 2.743198] nouveau 0000:01:00.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 2.778360] usb 3-5: New USB device found, idVendor=1bcf, idProduct=2c55
[ 2.778361] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.778362] usb 3-5: Product: HD WebCam
[ 2.778363] usb 3-5: Manufacturer: NC.21411.01N34510A7DLM0002
[ 2.807592] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 2.807593] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 2.876694] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.877071] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.877181] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.878255] ata1.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
[ 2.878256] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.879411] ata3.00: ATAPI: HL-DT-ST DVDRAM GTA0N, 1.00, max UDMA/133
[ 2.879540] ata1.00: configured for UDMA/133
[ 2.879869] scsi 0:0:0:0: Direct-Access ATA HGST HTS541010A9 A560 PQ: 0 ANSI: 5
[ 2.881585] ata3.00: configured for UDMA/133
[ 2.929670] ata6.00: ATA-8: TOSHIBA MQ01ABD075, AX003J, max UDMA/100
[ 2.929671] ata6.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.931377] ata6.00: configured for UDMA/100
[ 2.941310] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 2.941317] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[ 2.941812] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 2.942294] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 2.942298] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
[ 2.942303] ACPI Error: Method parse/execution failed [\_SB.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff8f2a169004b0), AE_NOT_FOUND (20160930/psparse-543)
[ 2.942460] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:47/LNXVIDEO:00/input/input12
[ 2.943551] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.943692] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13
[ 2.943755] [drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
[ 2.954642] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.954815] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.954817] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.954839] sd 0:0:0:0: [sda] Write Protect is off
[ 2.954841] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.954905] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.956545] fbcon: inteldrmfb (fb0) is primary device
[ 2.956577] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GTA0N 1.00 PQ: 0 ANSI: 5
[ 2.956605] Console: switching to colour frame buffer device 200x56
[ 2.956625] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.974439] usb 3-6: new high-speed USB device number 5 using xhci_hcd
[ 2.981984] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.981986] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.982177] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.982279] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 2.982549] scsi 5:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD0 3J PQ: 0 ANSI: 5
[ 3.019342] sda: sda2 sda3 sda4
[ 3.020120] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.022572] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 3.022690] sd 5:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[ 3.022692] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[ 3.022722] sd 5:0:0:0: [sdb] Write Protect is off
[ 3.022724] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.022757] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.116767] usb 3-6: New USB device found, idVendor=2109, idProduct=2812
[ 3.116769] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.116770] usb 3-6: Product: USB2.0 Hub
[ 3.116771] usb 3-6: Manufacturer: VIA Labs, Inc.
[ 3.117501] hub 3-6:1.0: USB hub found
[ 3.117873] hub 3-6:1.0: 4 ports detected
[ 3.152181] sdb: sdb1 sdb2 sdb3
[ 3.152980] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 3.246444] usb 3-10: new full-speed USB device number 6 using xhci_hcd
[ 3.256637] random: fast init done
[ 3.378694] psmouse serio4: synaptics: queried max coordinates: x [..5662], y [..4656]
[ 3.387977] usb 3-10: string descriptor 0 read error: -22
[ 3.387983] usb 3-10: New USB device found, idVendor=0489, idProduct=e04e
[ 3.387984] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.393145] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.398429] usbcore: registered new interface driver usbhid
[ 3.398430] usbhid: USB HID core driver
[ 3.399783] input: RAPOO RAPOO 2.4G Wireless Device as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:24AE:2000.0001/input/input15
[ 3.410270] psmouse serio4: synaptics: queried min coordinates: x [1278..], y [1198..]
[ 3.458563] hid-generic 0003:24AE:2000.0001: input,hidraw0: USB HID v1.01 Keyboard [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:14.0-2/input0
[ 3.458823] input: RAPOO RAPOO 2.4G Wireless Device as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:24AE:2000.0002/input/input16
[ 3.469922] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00423/0x840300/0x126c00/0x0, board id: 2134, fw id: 1447239
[ 3.478412] usb 3-6.1: new high-speed USB device number 7 using xhci_hcd
[ 3.507093] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input14
[ 3.518584] hid-generic 0003:24AE:2000.0002: input,hiddev0,hidraw1: USB HID v1.01 Mouse [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:14.0-2/input1
[ 3.592828] usb 3-6.1: New USB device found, idVendor=2109, idProduct=2812
[ 3.592830] usb 3-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.592831] usb 3-6.1: Product: USB2.0 Hub
[ 3.592832] usb 3-6.1: Manufacturer: VIA Labs, Inc.
[ 3.593465] hub 3-6.1:1.0: USB hub found
[ 3.593852] hub 3-6.1:1.0: 4 ports detected
[ 3.694457] usb 3-6.3: new full-speed USB device number 8 using xhci_hcd
[ 3.694653] clocksource: Switched to clocksource tsc
[ 3.807534] usb 3-6.3: New USB device found, idVendor=0ccd, idProduct=0028
[ 3.807536] usb 3-6.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.807537] usb 3-6.3: Product: USB Audio
[ 3.808728] input: USB Audio as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.3/3-6.3:1.3/0003:0CCD:0028.0003/input/input17
[ 3.866658] hid-generic 0003:0CCD:0028.0003: input,hidraw2: USB HID v1.00 Device [USB Audio] on usb-0000:00:14.0-6.3/input3
[ 3.898432] usb 3-6.1.3: new high-speed USB device number 9 using xhci_hcd
[ 4.011215] usb 3-6.1.3: New USB device found, idVendor=03f0, idProduct=6c11
[ 4.011217] usb 3-6.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.011219] usb 3-6.1.3: Product: Photosmart C4400 series
[ 4.011220] usb 3-6.1.3: Manufacturer: HP
[ 4.011220] usb 3-6.1.3: SerialNumber: MY8AVR102C0557
[ 4.102461] usb 3-6.4: new high-speed USB device number 10 using xhci_hcd
[ 4.215214] usb 3-6.4: New USB device found, idVendor=067b, idProduct=2571
[ 4.215216] usb 3-6.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.215217] usb 3-6.4: Product: Mass Storage Device
[ 4.215218] usb 3-6.4: Manufacturer: Prolific Technology Inc.
[ 4.215219] usb 3-6.4: SerialNumber: 0
[ 4.218831] usb-storage 3-6.1.3:1.3: USB Mass Storage device detected
[ 4.218914] scsi host6: usb-storage 3-6.1.3:1.3
[ 4.218958] usb-storage 3-6.4:1.0: USB Mass Storage device detected
[ 4.218994] scsi host7: usb-storage 3-6.4:1.0
[ 4.219030] usbcore: registered new interface driver usb-storage
[ 4.219940] usbcore: registered new interface driver uas
[ 4.306408] usb 3-6.1.4: new high-speed USB device number 11 using xhci_hcd
[ 4.420970] usb 3-6.1.4: New USB device found, idVendor=0480, idProduct=a00c
[ 4.420972] usb 3-6.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.420973] usb 3-6.1.4: Product: External USB 3.0
[ 4.420974] usb 3-6.1.4: Manufacturer: TOSHIBA
[ 4.420975] usb 3-6.1.4: SerialNumber: 20141017030445
[ 4.421755] usb-storage 3-6.1.4:1.0: USB Mass Storage device detected
[ 4.421871] scsi host8: usb-storage 3-6.1.4:1.0
[ 4.657270] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 5.231072] scsi 7:0:0:0: Direct-Access TOSHIBA MQ01ABD075 AX00 PQ: 0 ANSI: 0
[ 5.231130] scsi 6:0:0:0: Direct-Access HP Photosmart C4400 1.00 PQ: 0 ANSI: 5
[ 5.231447] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 5.231626] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 5.231801] sd 7:0:0:0: [sdd] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[ 5.232000] sd 7:0:0:0: [sdd] Write Protect is off
[ 5.232002] sd 7:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 5.232199] sd 7:0:0:0: [sdd] No Caching mode page found
[ 5.232202] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 5.232359] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 5.263139] random: crng init done
[ 5.300968] sdd: sdd1 sdd2 < sdd5 sdd6 >
[ 5.302302] sd 7:0:0:0: [sdd] Attached SCSI disk
[ 5.426898] scsi 8:0:0:0: Direct-Access TOSHIBA External USB 3.0 5438 PQ: 0 ANSI: 6
[ 5.427461] sd 8:0:0:0: Attached scsi generic sg5 type 0
[ 5.429010] sd 8:0:0:0: [sde] 1953525164 512-byte logical blocks: (1.00 TB/932 GiB)
[ 5.429440] sd 8:0:0:0: [sde] Write Protect is off
[ 5.429442] sd 8:0:0:0: [sde] Mode Sense: 23 00 00 00
[ 5.429837] sd 8:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.979086] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.436714] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 7.436878] systemd[1]: Detected architecture x86-64.
[ 7.443157] systemd[1]: Set hostname to <Atzes-Aspire>.
[ 7.942523] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 7.942670] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 7.942674] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 7.942792] nouveau 0000:01:00.0: DRM: evicting buffers...
[ 7.942793] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[ 7.942811] nouveau 0000:01:00.0: DRM: suspending client object trees...
[ 7.948155] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[ 8.552377] systemd[1]: Listening on udev Control Socket.
[ 8.552449] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.552473] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 8.552483] systemd[1]: Reached target Remote File Systems.
[ 8.552516] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.552541] systemd[1]: Listening on udev Kernel Socket.
[ 8.552570] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 8.743955] sde: sde1 sde2
[ 8.746723] sd 8:0:0:0: [sde] Attached SCSI disk
[ 10.750763] lp: driver loaded but no devices found
[ 11.164524] ppdev: user-space parallel port driver
[ 18.066282] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro
[ 18.130810] systemd-journald[326]: Received request to flush runtime journal from PID 1
[ 18.263837] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 18.263838] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 18.263839] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 18.263839] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 18.263840] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 18.270083] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 18.363958] AVX2 version of gcm_enc/dec engaged.
[ 18.363959] AES CTR mode by8 optimization enabled
[ 18.375320] EDAC MC: Ver: 3.0.0
[ 18.393824] intel_rapl: Found RAPL domain package
[ 18.393825] intel_rapl: Found RAPL domain core
[ 18.393826] intel_rapl: Found RAPL domain uncore
[ 18.393827] intel_rapl: Found RAPL domain dram
[ 18.393829] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 18.428519] EDAC ie31200: No ECC support
[ 18.438682] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000184F (\GPIS) (20160930/utaddress-247)
[ 18.438687] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20160930/utaddress-247)
[ 18.438690] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 18.438692] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\GPXX) (20160930/utaddress-247)
[ 18.438694] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\PMIX) (20160930/utaddress-247)
[ 18.438696] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20160930/utaddress-247)
[ 18.438698] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG0.PEGP.GPIO) (20160930/utaddress-247)
[ 18.438700] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 18.438700] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\GPXX) (20160930/utaddress-247)
[ 18.438702] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\PMIX) (20160930/utaddress-247)
[ 18.438704] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20160930/utaddress-247)
[ 18.438706] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20160930/utaddress-247)
[ 18.438707] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG0.PEGP.GPIO) (20160930/utaddress-247)
[ 18.438709] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 18.438710] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\GPXX) (20160930/utaddress-247)
[ 18.438711] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\PMIX) (20160930/utaddress-247)
[ 18.438713] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20160930/utaddress-247)
[ 18.438714] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20160930/utaddress-247)
[ 18.438716] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20160930/utaddress-247)
[ 18.438718] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG0.PEGP.GPIO) (20160930/utaddress-247)
[ 18.438720] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 18.438720] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 18.465109] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 18.477296] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC282: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 18.477298] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 18.477300] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 18.477301] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 18.477302] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 18.477303] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x1b
[ 18.477305] snd_hda_codec_realtek hdaudioC1D0: Mic=0x18
[ 18.487388] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[ 18.487445] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[ 18.726108] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[ 18.726146] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
[ 18.726180] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
[ 18.892035] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 18.892061] acer_wmi: Function bitmap for Communication Button: 0x801
[ 18.902382] acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0
[ 18.902426] input: Acer WMI hotkeys as /devices/virtual/input/input23
[ 18.902672] input: Acer BMA150 accelerometer as /devices/virtual/input/input24
[ 19.351540] ath: phy0: ASPM enabled: 0x42
[ 19.351541] ath: EEPROM regdomain: 0x6c
[ 19.351542] ath: EEPROM indicates we should expect a direct regpair map
[ 19.351543] ath: Country alpha2 being used: 00
[ 19.351543] ath: Regpair used: 0x6c
[ 19.354253] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 19.354567] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffb1c2c2280000, irq=18
[ 19.403291] ath9k 0000:0d:00.0 wlp13s0: renamed from wlan0
[ 20.430736] raid6: sse2x1 gen() 9455 MB/s
[ 20.478739] raid6: sse2x1 xor() 7481 MB/s
[ 20.526739] raid6: sse2x2 gen() 11869 MB/s
[ 20.574739] raid6: sse2x2 xor() 8386 MB/s
[ 20.611792] Bluetooth: Core ver 2.22
[ 20.611807] NET: Registered protocol family 31
[ 20.611807] Bluetooth: HCI device and connection manager initialized
[ 20.611810] Bluetooth: HCI socket layer initialized
[ 20.611812] Bluetooth: L2CAP socket layer initialized
[ 20.611815] Bluetooth: SCO socket layer initialized
[ 20.622737] raid6: sse2x4 gen() 12662 MB/s
[ 20.670741] raid6: sse2x4 xor() 9996 MB/s
[ 20.675983] media: Linux media interface: v0.10
[ 20.682439] Linux video capture interface: v2.00
[ 20.718726] raid6: avx2x1 gen() 16362 MB/s
[ 20.758149] em28xx 3-3:1.0: New device HCW dualHD @ 480 Mbps (2040:0265, interface 0, class 0)
[ 20.758152] em28xx 3-3:1.0: DVB interface 0 found: isoc
[ 20.758198] em28xx 3-3:1.0: chip ID is em28174
[ 20.766724] raid6: avx2x1 xor() 13254 MB/s
[ 20.769519] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c55)
[ 20.777805] uvcvideo 3-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 20.777807] uvcvideo 3-5:1.0: Entity type for entity Extension 3 was not initialized!
[ 20.777809] uvcvideo 3-5:1.0: Entity type for entity Processing 2 was not initialized!
[ 20.777810] uvcvideo 3-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 20.777892] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/input/input25
[ 20.777962] usbcore: registered new interface driver uvcvideo
[ 20.777963] USB Video Class driver (1.1.1)
[ 20.814741] raid6: avx2x2 gen() 20185 MB/s
[ 20.862740] raid6: avx2x2 xor() 12681 MB/s
[ 20.910730] raid6: avx2x4 gen() 21854 MB/s
[ 20.958748] raid6: avx2x4 xor() 16084 MB/s
[ 20.958749] raid6: using algorithm avx2x4 gen() 21854 MB/s
[ 20.958750] raid6: .... xor() 16084 MB/s, rmw enabled
[ 20.958750] raid6: using avx2x2 recovery algorithm
[ 21.153352] usbcore: registered new interface driver snd-usb-audio
[ 21.156034] xor: automatically using best checksumming function avx
[ 21.214236] Btrfs loaded, crc32c=crc32c-intel
[ 21.252570] BTRFS: device fsid 37efcee9-1d36-457e-ba47-93d54cae4000 devid 1 transid 175879 /dev/sda3
[ 21.339646] Adding 2104316k swap on /dev/sda2. Priority:-1 extents:1 across:2104316k FS
[ 21.373085] usbcore: registered new interface driver btusb
[ 21.961776] usb 3-10: USB disconnect, device number 6
[ 21.961827] usbcore: registered new interface driver ath3k
[ 21.981056] em28xx 3-3:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0xf0e1cbc8
[ 21.981057] em28xx 3-3:1.0: EEPROM info:
[ 21.981058] em28xx 3-3:1.0: microcode start address = 0x0004, boot configuration = 0x01
[ 21.987300] em28xx 3-3:1.0: AC97 audio (5 sample rates)
[ 21.987301] em28xx 3-3:1.0: 500mA max power
[ 21.987303] em28xx 3-3:1.0: Table at offset 0x27, strings=0x0e6a, 0x1888, 0x087e
[ 21.987436] em28xx 3-3:1.0: Identified as Hauppauge WinTV-dualHD DVB (card=99)
[ 21.988250] tveeprom: Hauppauge model 204109, rev B2I6, serial# 11512149
[ 21.988251] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4)
[ 21.988252] tveeprom: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
[ 21.988253] tveeprom: audio processor is None (idx 0)
[ 21.988254] tveeprom: has no radio, has IR receiver, has no IR transmitter
[ 21.988255] em28xx 3-3:1.0: dvb set to isoc mode.
[ 21.988350] usbcore: registered new interface driver em28xx
[ 22.030323] em28xx 3-3:1.0: Binding DVB extension
[ 22.041968] i2c i2c-20: Added multiplexed i2c bus 21
[ 22.041970] si2168 20-0064: Silicon Labs Si2168-B40 successfully identified
[ 22.041971] si2168 20-0064: firmware version: B 4.0.2
[ 22.052722] si2157 21-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
[ 22.052727] dvbdev: DVB: registering new adapter (3-3:1.0)
[ 22.052729] em28xx 3-3:1.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[ 22.052886] em28xx 3-3:1.0: DVB extension successfully initialized
[ 22.052886] em28xx: Registered (Em28xx dvb Extension) extension
[ 22.055627] em28xx 3-3:1.0: Registering input extension
[ 22.106756] Registered IR keymap rc-hauppauge
[ 22.106840] input: 3-3:1.0 IR as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/rc/rc0/input26
[ 22.106903] rc rc0: 3-3:1.0 IR as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/rc/rc0
[ 22.107015] em28xx 3-3:1.0: Input extension successfully initalized
[ 22.107016] em28xx: Registered (Em28xx Input Extension) extension
[ 22.258801] usb 3-10: new full-speed USB device number 12 using xhci_hcd
[ 22.400248] usb 3-10: string descriptor 0 read error: -22
[ 22.400254] usb 3-10: New USB device found, idVendor=0489, idProduct=e04e
[ 22.400255] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 22.730086] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 23.613555] usblp 3-6.1.3:1.1: usblp1: USB Bidirectional printer dev 9 if 1 alt 0 proto 2 vid 0x03F0 pid 0x6C11
[ 23.613573] usbcore: registered new interface driver usblp
[ 23.894920] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[ 24.020376] nouveau 0000:01:00.0: bus: MMIO write of 00000002 FAULT at 4188ac [ IBUS ]
[ 24.040886] nouveau 0000:01:00.0: DRM: resuming client object trees...
[ 24.208742] audit: type=1400 audit(1493993299.209:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="url-dispatcher-bad-url-helper" pid=954 comm="apparmor_parser"
[ 24.208961] audit: type=1400 audit(1493993299.209:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=950 comm="apparmor_parser"
[ 24.209048] audit: type=1400 audit(1493993299.209:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ubuntu-printing-app" pid=958 comm="apparmor_parser"
[ 24.209863] audit: type=1400 audit(1493993299.209:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=951 comm="apparmor_parser"
[ 24.210561] audit: type=1400 audit(1493993299.209:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/mediascanner-service-2.0" pid=957 comm="apparmor_parser"
[ 24.210930] audit: type=1400 audit(1493993299.213:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=952 comm="apparmor_parser"
[ 24.210933] audit: type=1400 audit(1493993299.213:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=952 comm="apparmor_parser"
[ 24.211159] audit: type=1400 audit(1493993299.213:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=962 comm="apparmor_parser"
[ 24.211161] audit: type=1400 audit(1493993299.213:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=962 comm="apparmor_parser"
[ 24.212132] audit: type=1400 audit(1493993299.213:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=965 comm="apparmor_parser"
[ 25.127233] systemd[1]: snapd.refresh.timer: Adding 3h 5min 47.264335s random time.
[ 25.127237] systemd[1]: snapd.refresh.timer: Adding 4h 19min 27.817091s random time.
[ 25.185049] systemd[1]: snapd.refresh.timer: Adding 2h 1min 44.821131s random time.
[ 25.185054] systemd[1]: snapd.refresh.timer: Adding 2h 18min 10.120174s random time.
[ 25.826679] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.826680] Bluetooth: BNEP filters: protocol multicast
[ 25.826683] Bluetooth: BNEP socket layer initialized
[ 26.933582] IPv6: ADDRCONF(NETDEV_UP): enp14s0: link is not ready
[ 26.945249] IPv6: ADDRCONF(NETDEV_UP): enp14s0: link is not ready
[ 26.945831] tg3 0000:0e:00.0 enp14s0: Link is down
[ 26.947831] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 26.958945] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 26.987776] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 27.375000] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 29.993127] usblp1: removed
[ 29.993992] usblp 3-6.1.3:1.1: usblp1: USB Bidirectional printer dev 9 if 1 alt 0 proto 2 vid 0x03F0 pid 0x6C11
[ 31.024056] tg3 0000:0e:00.0 enp14s0: Link is up at 1000 Mbps, full duplex
[ 31.024057] tg3 0000:0e:00.0 enp14s0: Flow control is on for TX and on for RX
[ 31.024066] IPv6: ADDRCONF(NETDEV_CHANGE): enp14s0: link becomes ready
[ 32.613042] Bluetooth: RFCOMM TTY layer initialized
[ 32.613051] Bluetooth: RFCOMM socket layer initialized
[ 32.613057] Bluetooth: RFCOMM ver 1.11
[ 33.775022] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 33.775182] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 33.775186] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 33.775309] nouveau 0000:01:00.0: DRM: evicting buffers...
[ 33.787314] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[ 33.787337] nouveau 0000:01:00.0: DRM: suspending client object trees...
[ 33.792994] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[ 44.006821] systemd[1]: snapd.refresh.timer: Adding 4h 36min 11.333510s random time.
[ 44.006826] systemd[1]: snapd.refresh.timer: Adding 4h 27min 16.242110s random time.
[ 54.115313] systemd[1]: snapd.refresh.timer: Adding 4h 15min 20.565820s random time.
[ 54.115319] systemd[1]: snapd.refresh.timer: Adding 59min 7.893124s random time.
[ 316.683504] mce: [Hardware Error]: Machine check events logged
[ 343.195562] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[ 343.332204] nouveau 0000:01:00.0: bus: MMIO write of 00000002 FAULT at 4188ac [ IBUS ]
[ 343.471871] nouveau 0000:01:00.0: DRM: resuming client object trees...
[ 349.195421] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 349.195588] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 349.195593] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 349.195762] nouveau 0000:01:00.0: DRM: evicting buffers...
[ 349.195764] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[ 349.195795] nouveau 0000:01:00.0: DRM: suspending client object trees...
[ 349.201490] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[ 350.487999] EXT4-fs (sdd5): recovery complete
[ 350.488003] EXT4-fs (sdd5): mounted filesystem with ordered data mode. Opts: (null)
[ 350.499023] EXT4-fs (sdd1): recovery complete
[ 350.499025] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[ 379.419455] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 399.396490] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 399.457147] XFS (sda4): Mounting V5 Filesystem
[ 399.699605] XFS (sda4): Ending clean mount
[ 694.382072] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 1009.383379] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 1324.388532] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 1639.390713] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 1954.392870] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 2269.397077] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 2584.402231] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 2899.404906] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 3214.408381] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 3232.603688] si2168 20-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
[ 3232.803759] si2168 20-0064: firmware version: B 4.0.11
[ 3232.807960] si2157 21-0060: found a 'Silicon Labs Si2157-A30'
[ 3232.856080] si2157 21-0060: firmware version: 3.0.5
[ 3529.352341] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 3844.413396] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 4159.377257] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 4474.419070] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 4789.426464] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 5104.430590] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 5397.727857] kauditd_printk_skb: 75 callbacks suppressed
[ 5397.727859] audit: type=1400 audit(1493998672.390:37): apparmor="DENIED" operation="sendmsg" profile="/usr/bin/evince" name="/run/systemd/journal/socket" pid=4400 comm="evince" requested_mask="w" denied_mask="w" fsuid=1000 ouid=0
[ 5419.435549] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 5734.385985] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 6049.402195] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 6364.423085] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 6679.443780] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 6994.455434] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 7309.459212] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 7624.403651] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 7939.424152] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 8254.411885] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 8569.472526] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 8884.475652] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 9199.478551] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 9514.481423] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[ 9829.484981] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[10144.488322] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[10459.491661] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[10774.457140] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[11089.498125] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[11404.501914] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[11719.505373] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[12034.453377] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[12349.473666] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[12664.494951] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[12979.461596] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[13294.525289] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[13609.529256] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[13924.532187] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[14239.477231] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[14554.540257] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[14869.544556] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[15184.548761] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[15499.552393] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[15814.556316] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[16129.559933] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[16444.541182] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[16759.515386] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[17074.572906] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[17389.578094] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[17704.527786] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[18019.585236] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[18334.530457] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[18649.556530] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[18964.576622] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[19279.595646] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[19594.551939] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[19909.611808] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[20224.616938] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[20539.620183] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[20854.624972] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[21169.629330] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[21484.633678] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[21799.637667] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[22114.641907] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[22429.592164] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[22744.650126] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[23059.654952] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[23374.604398] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[23689.663851] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[24004.667546] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[24319.671773] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[24634.623416] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[24949.621488] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[25264.662289] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[25579.679032] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[25894.692688] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[26209.697357] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[26524.701500] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[26839.705164] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[27154.654968] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[27469.713736] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[27784.717792] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[28099.722021] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[28414.726538] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[28729.730798] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[29044.734203] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[29359.738372] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[29674.738961] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[29989.745925] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[30304.749539] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[30619.753187] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[30934.705438] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[31249.725776] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[31564.744900] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[31879.763943] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[32194.773269] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[32509.780248] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[32824.783879] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[33139.789070] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[33454.736717] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[33769.796674] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[34084.801604] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[34399.805597] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[34714.809669] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[35029.813907] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[35344.816846] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[35659.818384] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[35974.825346] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[36289.766802] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[36604.832751] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[36919.836629] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[37234.789129] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[37549.807295] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[37583.772663] perf: interrupt took too long (2526 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[37864.828286] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[38179.811285] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[38494.803830] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[38809.862913] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[39124.867238] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[39439.871992] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[39754.875701] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[40069.879838] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[40384.883837] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[40699.888117] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[41014.890021] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[41329.897008] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[41644.842062] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[41959.850804] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[42274.855491] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[42589.913636] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[42904.917342] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[43219.921505] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[43534.873046] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[43849.872973] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[44164.880680] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[44479.930401] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[44794.897778] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[45109.890227] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[45424.950618] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[45739.955285] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[46054.959404] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[46369.953286] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[46684.967693] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[46999.972862] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[47314.972532] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[47629.980791] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[47944.985335] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[48259.985972] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[48574.958238] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[48889.998476] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[49205.002434] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[49520.007043] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[49834.957602] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[50149.976614] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[50464.996766] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[50780.015759] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[51095.011733] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[51409.976640] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[51725.008289] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[52040.040510] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[52354.996956] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[52669.995021] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[52985.009633] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[53300.058144] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[53615.061828] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[53930.065990] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[54245.071193] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[54560.075144] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[54875.078847] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[55190.083918] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[55505.088004] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[55820.091766] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[56135.044460] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[56450.063794] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[56765.082889] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[57080.101575] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[57395.113322] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[57710.074036] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[58025.121739] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[58340.126480] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[58655.130303] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[58970.078206] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[59285.138748] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[59600.143335] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[59915.146932] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[60230.150204] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[60545.100883] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[60860.158687] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[61175.147047] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[61490.166875] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[61805.171439] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[62120.176162] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[62435.127753] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[62750.145826] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[63065.165500] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[63380.184746] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[63695.196701] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[64010.201268] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[64325.204724] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[64640.209635] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[64955.213796] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[65270.197728] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[65585.222031] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[65900.225331] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[66215.229992] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[66530.232967] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[66845.213469] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[67160.233353] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[67475.245474] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[67790.249230] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[68105.198488] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[68420.257121] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[68735.205200] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[69050.226793] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[69365.245754] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[69680.265427] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[69995.223423] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[70310.281140] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[70625.281297] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[70940.289411] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[71255.237349] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[71570.297586] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[71885.300701] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[72200.305571] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[72515.253222] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[72830.313112] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[73145.317177] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[73460.321142] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[73775.325424] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[74090.328546] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[74403.869397] systemd[1]: snapd.refresh.timer: Adding 1h 28min 41.185665s random time.
[74405.329554] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[74720.336730] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[75035.285818] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[75350.304698] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[75665.327026] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[75980.345519] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[76295.333564] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[76610.360592] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[76925.306031] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[77240.309463] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[77555.372555] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[77870.336767] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[78185.380971] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[78500.385453] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[78815.389962] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[79130.392709] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[79445.397010] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[79760.401666] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[80075.350671] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[80390.409452] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[80705.413757] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[81020.360553] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[81335.367962] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[81650.384869] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[81965.405801] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[82280.425148] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[82595.436683] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[82910.440285] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[83225.411887] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[83540.440288] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[83855.452056] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[84170.397919] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[84485.459749] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[84800.431993] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[85115.467625] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[85430.411956] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[85745.476002] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[86060.479848] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[86375.483911] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[86690.467767] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[87005.491525] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[87320.496072] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[87635.447049] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[87950.465778] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[88265.485861] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[88580.504398] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[88895.516017] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[89210.520685] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[89525.524974] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[89840.474781] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[90155.532051] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[90470.536500] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[90785.540304] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[91100.543861] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[91415.548290] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[91730.552108] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[92045.556450] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[92360.560211] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[92675.563830] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[92990.511644] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[93305.571713] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[93620.527714] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[93935.526561] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[94250.546015] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[94565.564640] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[94880.583151] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[95195.594535] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[95510.598639] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[95825.602236] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[96140.606186] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[96455.610245] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[96770.603937] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[97085.618367] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[97400.623127] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[97715.627101] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[98030.571886] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[98345.635218] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[98660.639513] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[98975.585558] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[99290.647708] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[99605.623792] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[99920.643806] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[100235.606885] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[100550.607674] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[100865.644712] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[101180.635346] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[101495.616171] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[101810.622522] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[102125.683073] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[102440.686787] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[102755.690611] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[103070.694944] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[103385.666620] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[103700.702195] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[104015.706325] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[104330.709665] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[104645.702505] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[104960.718847] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[105275.723418] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[105590.727809] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[105905.672763] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[106220.733693] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[106535.687027] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[106850.706762] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[107165.695539] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[107480.716077] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[107795.755821] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[108110.705387] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[108425.763934] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[108740.768034] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[109055.771906] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[109370.776659] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[109685.781554] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[110000.785044] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[110315.789386] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[110630.793452] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[110945.794789] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[111260.780919] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[111575.745562] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[111890.807998] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[112205.812367] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[112520.816243] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[112835.764170] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[113150.786720] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[113465.806263] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[113780.825359] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[114095.781735] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[114410.824804] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[114725.845135] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[115040.848925] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[115355.853253] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[115670.856952] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[115985.861278] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[116300.841535] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[116615.869162] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[116930.870484] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[117245.878008] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[117560.882414] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[117875.827264] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[118190.887482] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[118505.895187] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[118820.899237] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[119135.847983] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[119450.868538] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[119765.887489] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[120080.865159] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[120395.917624] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[120710.867921] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[121025.890182] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[121340.910213] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[121655.934143] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[121970.938378] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[122285.942455] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[122600.892198] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[122915.894804] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[123230.955173] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[123545.959149] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[123860.964140] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[124175.968067] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[124490.972362] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[124805.976376] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[125120.980660] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[125435.931008] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[125750.949099] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[126065.969052] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[126380.959187] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[126695.980149] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[127010.996153] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[127326.008464] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[127640.956298] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[127955.957533] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[128271.020520] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[128586.024339] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[128901.028949] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[129216.032960] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[129531.037123] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[129845.998470] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[130161.046708] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[130476.050564] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[130791.054930] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[131106.059391] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[131421.063603] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[131736.014364] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[132051.033768] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[132366.049393] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[132681.043695] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[132996.080067] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[133311.028086] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[133626.083739] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[133941.095921] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[134256.100241] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[134571.105222] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[134886.108811] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[135201.057251] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[135516.116860] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[135831.063601] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[136146.125523] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[136461.128938] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[136776.133075] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[137091.137002] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[137406.141521] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[137721.091087] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[138036.092750] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[138351.096564] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[138666.133904] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[138981.147679] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[139296.164683] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[139611.169111] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[139926.172633] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[140241.177963] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[140556.182255] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[140871.131994] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[141186.190439] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[141501.194689] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[141816.150601] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[142131.202849] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[142446.206346] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[142761.210822] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[143076.167126] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[143391.164227] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[143706.223775] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[144021.227615] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[144336.178840] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[144651.196632] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[144966.218876] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[145281.237604] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[145596.249373] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[145911.253530] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[146226.257195] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[146541.262057] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[146856.266104] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[147171.267236] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[147486.274033] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[147801.278512] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[148116.278401] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[148431.286006] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[148746.290592] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[149061.294775] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[149376.271077] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[149691.248168] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[150006.307020] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[150321.310421] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[150636.259550] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[150951.258792] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[151266.297123] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[151581.319249] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[151896.330899] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[152211.335410] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[152526.339766] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[152841.343261] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[153156.294382] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[153471.351828] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[153786.316695] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[154101.360448] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[154416.364816] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[154731.368401] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[155046.372500] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[155361.376922] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[155676.381318] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[155991.384916] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[156306.335083] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[156621.390447] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[156936.340857] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[157251.361530] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[157566.383597] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[157881.356358] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[158196.414493] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[158511.417771] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[158826.422079] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[159141.425544] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[159456.430266] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[159771.379285] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[160086.438865] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[160401.443009] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[160716.393149] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[161031.403131] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[161346.395983] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[161661.459541] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[161976.463651] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[162291.466596] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[162606.470785] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[162921.474179] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[163236.426342] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[163551.426519] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[163866.463276] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[164181.482887] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[164496.466767] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[164811.495122] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[165126.444118] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[165441.507129] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[165756.510753] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[166071.456256] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[166386.511400] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[166701.523424] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[167016.526612] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[167331.531022] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[167646.535546] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[167961.539571] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[168276.543262] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[168591.546384] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[168906.550268] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[169221.506544] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[169536.500186] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[169851.524532] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[170166.543811] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[170481.562494] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[170796.521104] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[171111.578428] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[171426.583044] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[171741.586564] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[172056.591079] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[172371.594678] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[172686.598676] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[173001.602926] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
[173316.594607] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
thomas@Atzes-Aspire:~$