ubuntuusers.de

WLAN / Access Point: Not-Associated

Status: Gelöst | Ubuntu-Version: Ubuntu 10.10 (Maverick Meerkat)
Antworten |

Lucia

Anmeldungsdatum:
5. Dezember 2010

Beiträge: Zähle...

Hallo Ubuntu-User,

ich hatte schon mal eine WLAN-Verbindung und weiß nicht, warum ich die plötzlich nicht mehr hab. Soviel ich verstanden hab, fehlt da jetzt der Treiber, oder? Ich bin der Wiki-Anleitung gefolgt, aber jetzt weiß ich nicht so recht welchen Treiber ich brauche und wo ich ihn runter laden kann.

lucia@lucia-Notebook:~$ iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

eth1      IEEE 802.11  Access Point: Not-Associated   
          Link Quality:5  Signal level:0  Noise level:169
          Rx invalid nwid:0  invalid crypt:0  invalid misc:0

lucia@lucia-Notebook:~$ lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx)
00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1)
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller (rev 40)
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200]
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g LP-PHY (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
lucia@lucia-Notebook:~$ 

Vielen Dank für jede Hilfe

aasche

Anmeldungsdatum:
30. Januar 2006

Beiträge: 14259

Da hast Du Dir aber ein komplexes Thema fuer Deine 1. Frage hier ausgesucht... (siehe auch hier)

Ich bin der Wiki-Anleitung gefolgt, aber jetzt weiß ich nicht so recht welchen Treiber ich brauche und wo ich ihn runter laden kann.

Diesem Artikel: WLAN/Broadcom bcm43xx? Was sagt denn der restricted-manager dazu? Treiber heissen unter Linux Kernelmodule und brauchen normalerweise nicht heruntergeladen zu werden, da sie schon Bestandteil von Linux sind.

02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g LP-PHY (rev 01)

Der Chipsatz ist ein BCM4313. Leider fehlen noch ein paar weitere Angaben (siehe unten). Letzte Frage: gibt es eine Taste/Schalter/Tastenkombination fuer WLAN?

sudo rfkill list

praseodym Team-Icon

Supporter
Avatar von praseodym

Anmeldungsdatum:
9. Februar 2009

Beiträge: 22111

Wohnort: ~

Hallo und willkommen bei uu.de.

Poste noch die Ausgaben von:

lspci -nnk | grep -i net -A2 #da sieht man mehr Infos
lsmod
route -n
cat /etc/resolv.conf
sudo iwlist scan #welches ist dein Netz?
dmesg | egrep 'net|eth|sky|sis|via|3c3|3c5|e100|8139|8169|acx|air|ath|ar91|atme|at7|herm|iwl|ipw|rtl8|r81|rt2|rt6|rt7|tg3|ssb|wl|b43|b44|ori|pri|p5|zd|ndis'

Den letzten Befehl am Besten als copy/paste 😉

Lucia

(Themenstarter)

Anmeldungsdatum:
5. Dezember 2010

Beiträge: 14

@ aasche

Da hast Du Dir aber ein komplexes Thema fuer Deine 1. Frage hier ausgesucht... (siehe auch hier)

Naja, mein erster Beitrag ist das hier nicht - aber für meinen eigenen Account (dollpatsch) hab ich kein Passwort mehr, deshalb hab ich für meine Tochter einen angelegt, deren Notebook ich hier einrichte.

Der Chipsatz ist ein BCM4313. Liefere bitte noch diese Angaben nach:

lucia@lucia-Notebook:~$ uname -a
Linux lucia-Notebook 2.6.35-23-generic #41-Ubuntu SMP Wed Nov 24 10:18:49 UTC 2010 i686 GNU/Linux
lucia@lucia-Notebook:~$ lspci -nnk
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate [1022:9601]
	Subsystem: Hewlett-Packard Company Device [103c:1604]
00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) [1022:9602]
	Kernel modules: shpchp
00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) [1022:9605]
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606]
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391]
	Subsystem: Hewlett-Packard Company Device [103c:1604]
	Kernel driver in use: ahci
	Kernel modules: ahci
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
	Subsystem: Hewlett-Packard Company Device [103c:1604]
	Kernel driver in use: ohci_hcd
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
	Subsystem: Hewlett-Packard Company Device [103c:1604]
	Kernel driver in use: ehci_hcd
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
	Subsystem: Hewlett-Packard Company Device [103c:1604]
	Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
	Subsystem: Hewlett-Packard Company Device [103c:1604]
	Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 42)
	Subsystem: Hewlett-Packard Company Device [103c:1604]
	Kernel modules: i2c-piix4
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
	Subsystem: Hewlett-Packard Company Device [103c:1604]
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] (rev 40)
	Subsystem: Hewlett-Packard Company Device [103c:1604]
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (rev 40)
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399]
	Subsystem: Hewlett-Packard Company Device [103c:1604]
	Kernel driver in use: ohci_hcd
00:16.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
	Subsystem: Hewlett-Packard Company Device [103c:1604]
	Kernel driver in use: ohci_hcd
00:16.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
	Subsystem: Hewlett-Packard Company Device [103c:1604]
	Kernel driver in use: ehci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
	Kernel driver in use: k10temp
	Kernel modules: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc M880G [Mobility Radeon HD 4200] [1002:9712]
	Subsystem: Hewlett-Packard Company Device [103c:1604]
	Kernel driver in use: radeon
	Kernel modules: radeon
02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g LP-PHY [14e4:4727] (rev 01)
	Subsystem: Hewlett-Packard Company Device [103c:145c]
	Kernel driver in use: wl
	Kernel modules: wl
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
	Subsystem: Hewlett-Packard Company Device [103c:1604]
	Kernel driver in use: r8169
	Kernel modules: r8169
lucia@lucia-Notebook:~$ lsmod
Module                  Size  Used by
usbhid                 36882  0 
hid                    67742  1 usbhid
binfmt_misc             6599  1 
parport_pc             26058  0 
ppdev                   5556  0 
joydev                  8735  0 
snd_hda_codec_realtek   217971  1 
snd_hda_intel          22107  2 
snd_hda_codec          87552  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               5040  1 snd_hda_codec
radeon                827837  3 
snd_pcm                71475  2 snd_hda_intel,snd_hda_codec
snd_seq_midi            4588  0 
snd_rawmidi            17783  1 snd_seq_midi
ttm                    56633  1 radeon
snd_seq_midi_event      6047  1 snd_seq_midi
drm_kms_helper         30168  1 radeon
snd_seq                47174  2 snd_seq_midi,snd_seq_midi_event
lib80211_crypt_tkip     7736  0 
snd_timer              19067  2 snd_pcm,snd_seq
snd_seq_device          5744  3 snd_seq_midi,snd_rawmidi,snd_seq
uvcvideo               55847  0 
drm                   168054  5 radeon,ttm,drm_kms_helper
wl                   1959533  0 
videodev               43098  1 uvcvideo
hp_wmi                  5223  0 
snd                    49006  13 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
agpgart                32011  2 ttm,drm
video                  18712  0 
v4l1_compat            13359  2 uvcvideo,videodev
i2c_algo_bit            5168  1 radeon
output                  1883  1 video
lib80211                5058  2 lib80211_crypt_tkip,wl
soundcore                880  1 snd
snd_page_alloc          7120  2 snd_hda_intel,snd_pcm
psmouse                59033  0 
shpchp                 29886  0 
i2c_piix4               8635  0 
k10temp                 2607  0 
serio_raw               4022  0 
lp                      7342  0 
parport                31492  3 parport_pc,ppdev,lp
ahci                   19013  0 
r8169                  36489  0 
libahci                21667  3 ahci
mii                     4425  1 r8169
lucia@lucia-Notebook:~$ sudo rfkill list
[sudo] password for lucia: 
0: hp-wwan: Wireless WAN
	Soft blocked: no
	Hard blocked: no
lucia@lucia-Notebook:~$ cat /var/lib/NetworkManager/NetworkManager.state

[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
lucia@lucia-Notebook:~$ 

Letzte Frage: gibt es eine Taste/Schalter/Tastenkombination fuer WLAN?

Ja, es leuchtet weiß (wie der Einschaltknopf) / Bei orangem Leuchten ist es offenbar ausgeschalten


@ praseodym

lucia@lucia-Notebook:~$ lspci -nnk | grep -i net -A2
02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g LP-PHY [14e4:4727] (rev 01)
	Subsystem: Hewlett-Packard Company Device [103c:145c]
	Kernel driver in use: wl
--
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
	Subsystem: Hewlett-Packard Company Device [103c:1604]
	Kernel driver in use: r8169
lucia@lucia-Notebook:~$ lsmod
Module                  Size  Used by
usbhid                 36882  0 
hid                    67742  1 usbhid
binfmt_misc             6599  1 
parport_pc             26058  0 
ppdev                   5556  0 
joydev                  8735  0 
snd_hda_codec_realtek   217971  1 
snd_hda_intel          22107  2 
snd_hda_codec          87552  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               5040  1 snd_hda_codec
radeon                827837  3 
snd_pcm                71475  2 snd_hda_intel,snd_hda_codec
snd_seq_midi            4588  0 
snd_rawmidi            17783  1 snd_seq_midi
ttm                    56633  1 radeon
snd_seq_midi_event      6047  1 snd_seq_midi
drm_kms_helper         30168  1 radeon
snd_seq                47174  2 snd_seq_midi,snd_seq_midi_event
lib80211_crypt_tkip     7736  0 
snd_timer              19067  2 snd_pcm,snd_seq
snd_seq_device          5744  3 snd_seq_midi,snd_rawmidi,snd_seq
uvcvideo               55847  0 
drm                   168054  5 radeon,ttm,drm_kms_helper
wl                   1959533  0 
videodev               43098  1 uvcvideo
hp_wmi                  5223  0 
snd                    49006  13 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
agpgart                32011  2 ttm,drm
video                  18712  0 
v4l1_compat            13359  2 uvcvideo,videodev
i2c_algo_bit            5168  1 radeon
output                  1883  1 video
lib80211                5058  2 lib80211_crypt_tkip,wl
soundcore                880  1 snd
snd_page_alloc          7120  2 snd_hda_intel,snd_pcm
psmouse                59033  0 
shpchp                 29886  0 
i2c_piix4               8635  0 
k10temp                 2607  0 
serio_raw               4022  0 
lp                      7342  0 
parport                31492  3 parport_pc,ppdev,lp
ahci                   19013  0 
r8169                  36489  0 
libahci                21667  3 ahci
mii                     4425  1 r8169
lucia@lucia-Notebook:~$ route -n
Kernel-IP-Routentabelle
Ziel            Router          Genmask         Flags Metric Ref    Use Iface
192.168.178.0   0.0.0.0         255.255.255.0   U     1      0        0 eth0
169.254.0.0     0.0.0.0         255.255.0.0     U     1000   0        0 eth0
0.0.0.0         192.168.178.1   0.0.0.0         UG    0      0        0 eth0
lucia@lucia-Notebook:~$ cat /etc/resolv.conf
# Generated by NetworkManager
nameserver 192.168.178.1
lucia@lucia-Notebook:~$ sudo iwlist scan
lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

eth1      Scan completed :
          Cell 01 - Address: 00:1F:3F:A3:78:C2
                    ESSID:"samson"
                    Mode:Managed
                    Frequency:2.412 GHz (Channel 1)
                    Quality:5/5  Signal level:-20 dBm  Noise level:-85 dBm
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK
                    Encryption key:on
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
                              48 Mb/s; 54 Mb/s
          Cell 02 - Address: 00:1A:4F:91:45:6C
                    ESSID:"SP5"
                    Mode:Managed
                    Frequency:2.457 GHz (Channel 10)
                    Quality:2/5  Signal level:-70 dBm  Noise level:-88 dBm
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK
                    Encryption key:on
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s
                              6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
                              36 Mb/s; 48 Mb/s; 54 Mb/s

lucia@lucia-Notebook:~$ dmesg | egrep 'net|eth|sky|sis|via|3c3|3c5|e100|8139|8169|acx|air|ath|ar91|atme|at7|herm|iwl|ipw|rtl8|r81|rt2|rt6|rt7|tg3|ssb|wl|b43|b44|ori|pri|p5|zd|ndis'
[    0.000000] ACPI: SLIC 6fee1000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.004261] Initializing cgroup subsys net_cls
[    0.281422] audit: initializing netlink socket (disabled)
[    0.323970] thermal LNXTHERM:01: registered as thermal_zone0
[    0.323977] ACPI: Thermal Zone [THRM] (22 C)
[    0.326143] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.833678] device-mapper: multipath: version 1.1.1 loaded
[    0.833680] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.190632] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.190656] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.190691] r8169 0000:03:00.0: setting latency timer to 64
[    1.190738] r8169 0000:03:00.0: irq 42 for MSI/MSI-X
[    1.191178] r8169 0000:03:00.0: eth0: RTL8102e at 0xf8096000, 64:31:50:53:0a:0c, XID 04e00000 IRQ 42
[   12.933381] Adding 6142972k swap on /dev/sda5.  Priority:-1 extents:1 across:6142972k 
[   13.218687] lib80211_crypt: registered algorithm 'NULL'
[   13.222527] wl: module license 'MIXED/Proprietary' taints kernel.
[   13.331016] wl 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   13.331034] wl 0000:02:00.0: setting latency timer to 64
[   13.467834] lib80211_crypt: registered algorithm 'TKIP'
[   13.467952] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.60.48.36 
[   14.130797] r8169 0000:03:00.0: eth0: link up
[   14.130803] r8169 0000:03:00.0: eth0: link up
[   24.176062] eth1: no IPv6 routers present
[   24.760028] eth0: no IPv6 routers present
[ 2356.010198] r8169 0000:03:00.0: eth0: link down
[ 2376.727203] r8169 0000:03:00.0: eth0: link up
lucia@lucia-Notebook:~$ 

Den letzten Befehl am Besten als copy/paste 😉

Das hab ich mit allen gemacht 😳

Mein Netz ist samson

Vielen Dank noch mal vorab

praseodym Team-Icon

Supporter
Avatar von praseodym

Anmeldungsdatum:
9. Februar 2009

Beiträge: 22111

Wohnort: ~

Hallo,

versuche, den Treiber zu reinstallieren:

sudo apt-get install --reinstall bcmwl-kernel-source

dann unter "Hardwaretreiber" diesen de- und wieder reaktivieren. Evtl. rebooten. Verschlüsselung auf reines WPA2-AES wenns geht, MAC-Filter im Router sollte "aus" sein. Kontrolliere danach:

iwconfig
lsmod
dmesg | grep wl
route -n

Lucia

(Themenstarter)

Anmeldungsdatum:
5. Dezember 2010

Beiträge: 14

Hallo,

ich habe folgenden Befehl im Terminal ausgeführt.

sudo apt-get install --reinstall bcmwl-kernel-source

aber dann stoße ich auf folgendes Problem: Wie unter http://wiki.ubuntuusers.de/WLAN/Broadcom_bcm43xx#Installation beschrieben, sollten unter >System >Systemverwaltung die Hardwaretreiber zu finden sein - die sind aber dort nicht aufrufbar.

dann unter "Hardwaretreiber" diesen de- und wieder reaktivieren. Evtl. rebooten. Verschlüsselung auf reines WPA2-AES wenns geht, MAC-Filter im Router sollte "aus" sein.

Wo kann ich die Verschlüsselung einstellen?

praseodym Team-Icon

Supporter
Avatar von praseodym

Anmeldungsdatum:
9. Februar 2009

Beiträge: 22111

Wohnort: ~

Die Verschlüsselung und den MAC-Filter kannst du im Router-Interface umstellen. Per Kabelverbindung im Firefox eingeben:

http://192.168.178.1

Wegen dem Treiber mal nen Neustart probieren.

Lucia

(Themenstarter)

Anmeldungsdatum:
5. Dezember 2010

Beiträge: 14

Herzlichen Dank für die Hilfe - jetzt funkts wieder 👍

Antworten |