praseodym schrieb:
Hast du einen älteren Kernel versucht?
Nein, lief ja auch bis letzten Donnerstag.
Hier die Codeblöcke:
1.
eddi@runner:~$ uname -a
Linux runner 4.4.0-64-generic #85-Ubuntu SMP Mon Feb 20 11:50:30 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
2.
eddi@runner:~$ lspci -nnk | grep -i net -A2
03:00.0 Ethernet controller [0200]: Qualcomm Atheros Killer E2400 Gigabit Ethernet Controller [1969:e0a1] (rev 10)
Subsystem: Micro-Star International Co., Ltd. [MSI] Killer E2400 Gigabit Ethernet Controller [1462:7977]
Kernel driver in use: alx
Kernel modules: alx
3.
eddi@runner:~$ pccardctl info
4.
eddi@runner:~$ lsusb
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 0bda:8812 Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac WLAN Adapter
Bus 001 Device 004: ID 0c4b:0500 Reiner SCT Kartensysteme GmbH cyberJack RFID standard dual interface smartcard reader
Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
5. usb-devices
6.
eddi@runner:~$ cat /etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
7.
eddi@runner:~$ cat /etc/resolv.conf
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
8.
eddi@runner:~$ cat /etc/hosts
127.0.0.1 localhost
127.0.1.1 runner
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
9.
eddi@runner:~$ ifconfig -a
enp3s0 Link encap:Ethernet HWaddr 4c:cc:6a:24:2b:a4
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:18
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:12268 errors:0 dropped:0 overruns:0 frame:0
TX packets:12268 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:941687 (941.6 KB) TX bytes:941687 (941.6 KB)
10.
eddi@runner:~$ iwconfig
lo no wireless extensions.
enp3s0 no wireless extensions.
11.
eddi@runner:~$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
12.
eddi@runner:~$ arp -v
Entries: 0 Skipped: 0 Found: 0
13.
eddi@runner:~$ ip neigh show
14.
eddi@runner:~$ cat /var/lib/NetworkManager/NetworkManager.state
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
15.
eddi@runner:~$ cat /etc/NetworkManager/NetworkManager.conf
[main]
plugins=ifupdown,keyfile,ofono
dns=dnsmasq
[ifupdown]
managed=false
16.
eddi@runner:~$ iwlist chan
lo no frequency information.
enp3s0 no frequency information.
eddi@runner:~$ rfkill list
17.
eddi@runner:~$ cat /etc/udev/rules.d/70-persistent-net.rules | egrep -i 'device|sub' -A3
cat: /etc/udev/rules.d/70-persistent-net.rules: No such file or directory
18. lsmod-netis
19.
eddi@runner:~$ iwlist chan
lo no frequency information.
enp3s0 no frequency information.
eddi@runner:~$ sudo iwlist scan
[sudo] password for eddi:
lo Interface doesn't support scanning.
enp3s0 Interface doesn't support scanning.
20.
eddi@runner:~$ egrep -i 'net|eth|wlan|firm|reason' /var/log/syslog
Mar 14 10:48:44 runner org.freedesktop.FileManager1[1773]: Nautilus-Share-Message: Called "net usershare info" but it failed: 'net usershare' returned error 255: info_fn: file /var/lib/samba/usershares/transfer is not a well formed usershare file.
21.
eddi@runner:~$ dmesg | egrep 'net|eth|sky|sun|sis|via|3c3|3c5|e100|8139|8169|acx|air|ath|atl|ar9|carl|atme|at7|herm|iwl|ipw|rtl8|r81|rt2|rt3|rt6|rt7|tg3|ssb|wl|b43|b44|ori|pri|p5|zd|ndis|wmi|ns8|FW|key'
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88086ec00000 s98264 r8192 d28712 u262144
[ 0.000000] pcpu-alloc: s98264 r8192 d28712 u262144 alloc=1*2097152
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.028399] Initializing cgroup subsys net_cls
[ 0.028401] Initializing cgroup subsys net_prio
[ 0.029313] CPU0: Thermal monitoring enabled (TM1)
[ 0.160183] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.248169] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.616043] audit: initializing netlink subsys (disabled)
[ 0.616264] Initialise system trusted keyring
[ 0.617787] Key type big_key registered
[ 0.617796] Allocating IMA MOK and blacklist keyrings.
[ 0.618484] Asymmetric key parser 'x509' registered
[ 0.699261] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.699262] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.699333] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.699334] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.752380] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.824029] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.838687] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.839462] Loaded X.509 cert 'Build time autogenerated kernel key: 11f495fa9f4186f263f5fd144a167c99990e2f12'
[ 0.864651] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.903706] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 0.914613] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [4c:cc:6a:24:2b:a4]
[ 0.959949] alx 0000:03:00.0 enp3s0: renamed from eth0
[ 1.284183] ata2.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133
[ 1.286289] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
[ 2.868169] systemd[1]: Created slice System Slice.
[ 2.888857] systemd[1]: Starting Set console keymap...
[ 3.021057] wmi: Mapper loaded
[ 3.558183] Adding 38629372k swap on /dev/sdb8. Priority:-1 extents:1 across:38629372k FS
[ 5.867056] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Grüße, Eddi