Gestern Ubuntu 10.04 neuinstalliert. Den passenden Treiber für meine Wlan Karte installiert. Gestern abend ging es wunderbar (auch nach 1-2 mal Neustart um zu gucken ob ich nicht träume), heute sitz ich wieder mit Kabel da.
hab alle Befehle aus der Anleitung ausgeführt, ist natürlich dem entsprechend lang. Bitte mal reingucken und mir sagen wo's hackt. Er logt sich angeblich ins wlan ein, aber keine Datenübertragung. manchmal fliegt er auch gleich wieder raus. oder ist eingelogt aber keine signalstärke...
Danke 🙄
Linux poldie 2.6.32-36-generic #79-Ubuntu SMP Tue Nov 8 22:29:53 UTC 2011 x86_64 GNU/Linux 04:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01) Kernel driver in use: b43-pci-bridge Kernel modules: ssb 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10) Kernel driver in use: tg3 Kernel modules: tg3 Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 003: ID 046d:0a1a Logitech, Inc. Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 0c45:63fa Microdia Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub auto lo iface lo inet loopback 127.0.0.1 localhost 127.0.1.1 poldie ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts # This file maintains persistent names for network interfaces. # See udev(7) for syntax. # # Entries are automatically added by the 75-persistent-net-generator.rules # file; however you are also free to add your own entries. # PCI device 0x14e4:0x1698 (tg3) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:22:19:db:c9:de", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" # PCI device 0x14e4:0x4315 (b43-pci-bridge) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:23:4e:b6:f3:ba", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0" eth0 Link encap:Ethernet Hardware Adresse 00:22:19:db:c9:de inet6-Adresse: fe80::222:19ff:fedb:c9de/64 Gültigkeitsbereich:Verbindung UP BROADCAST MULTICAST MTU:1500 Metrik:1 RX packets:4831 errors:0 dropped:0 overruns:0 frame:0 TX packets:4842 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX bytes:4405618 (4.4 MB) TX bytes:658590 (658.5 KB) Interrupt:17 lo Link encap:Lokale Schleife inet Adresse:127.0.0.1 Maske:255.0.0.0 inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine UP LOOPBACK RUNNING MTU:16436 Metrik:1 RX packets:283 errors:0 dropped:0 overruns:0 frame:0 TX packets:283 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:0 RX bytes:21145 (21.1 KB) TX bytes:21145 (21.1 KB) wlan0 Link encap:Ethernet Hardware Adresse 00:23:4e:b6:f3:ba inet Adresse:10.42.43.1 Bcast:10.42.43.255 Maske:255.255.255.0 inet6-Adresse: fe80::223:4eff:feb6:f3ba/64 Gültigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1 RX packets:15 errors:0 dropped:0 overruns:0 frame:0 TX packets:239 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX bytes:3678 (3.6 KB) TX bytes:43187 (43.1 KB) Kernel-IP-Routentabelle Ziel Router Genmask Flags Metric Ref Use Iface 10.42.43.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 wlan0 IEEE 802.11bg ESSID:"FRITZ!Fon 7150" Mode:Ad-Hoc Frequency:2.412 GHz Cell: 92:CC:DD:0F:7E:0D Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off wlan0 14 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Channel 12 : 2.467 GHz Channel 13 : 2.472 GHz Channel 14 : 2.484 GHz Current Frequency:2.412 GHz (Channel 1) wlan0 14 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Channel 12 : 2.467 GHz Channel 13 : 2.472 GHz Channel 14 : 2.484 GHz Current Frequency:2.412 GHz (Channel 1) 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Module Size Used by cryptd 8116 0 aes_x86_64 7912 0 aes_generic 27607 1 aes_x86_64 ipt_MASQUERADE 1863 1 xt_state 1490 1 ipt_REJECT 2384 2 xt_tcpudp 2667 4 iptable_filter 1841 1 nf_nat_h323 5978 0 nf_conntrack_h323 55161 1 nf_nat_h323 nf_nat_pptp 2245 0 nf_conntrack_pptp 5549 1 nf_nat_pptp nf_conntrack_proto_gre 4734 1 nf_conntrack_pptp nf_nat_proto_gre 1719 1 nf_nat_pptp nf_nat_tftp 1017 0 nf_conntrack_tftp 4001 1 nf_nat_tftp nf_nat_sip 6169 0 nf_conntrack_sip 18894 1 nf_nat_sip nf_nat_irc 1577 0 nf_conntrack_irc 4429 1 nf_nat_irc nf_nat_ftp 2513 0 nf_conntrack_ftp 7126 1 nf_nat_ftp iptable_nat 4268 1 nf_nat 19286 9 ipt_MASQUERADE,nf_nat_h323,nf_nat_pptp,nf_nat_proto_gre,nf_nat_tftp,nf_nat_sip,nf_nat_irc,nf_nat_ftp,iptable_nat nf_conntrack_ipv4 12742 4 iptable_nat,nf_nat nf_conntrack 73326 18 ipt_MASQUERADE,xt_state,nf_nat_h323,nf_conntrack_h323,nf_nat_pptp,nf_conntrack_pptp,nf_conntrack_proto_gre,nf_nat_tftp,nf_conntrack_tftp,nf_nat_sip,nf_conntrack_sip,nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_conntrack_ftp,iptable_nat,nf_nat,nf_conntrack_ipv4 nf_defrag_ipv4 1481 1 nf_conntrack_ipv4 ip_tables 18201 2 iptable_filter,iptable_nat x_tables 22361 6 ipt_MASQUERADE,xt_state,ipt_REJECT,xt_tcpudp,iptable_nat,ip_tables binfmt_misc 7960 1 ppdev 6375 0 vboxnetadp 5235 0 vboxnetflt 12242 0 vboxdrv 1768311 2 vboxnetadp,vboxnetflt snd_hda_codec_atihdmi 3023 1 snd_hda_codec_idt 61546 1 snd_usb_audio 92747 1 snd_hda_intel 25805 2 snd_usb_lib 19193 1 snd_usb_audio snd_hda_codec 85759 3 snd_hda_codec_atihdmi,snd_hda_codec_idt,snd_hda_intel snd_hwdep 6924 2 snd_usb_audio,snd_hda_codec snd_seq_dummy 1782 0 snd_pcm_oss 41394 0 snd_mixer_oss 16299 1 snd_pcm_oss snd_pcm 87946 4 snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_oss 31191 0 snd_seq_midi 5829 0 snd_rawmidi 23420 2 snd_usb_lib,snd_seq_midi snd_seq_midi_event 7267 2 snd_seq_oss,snd_seq_midi snd_seq 57481 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 23681 2 snd_pcm,snd_seq fbcon 39270 71 tileblit 2487 1 fbcon font 8053 1 fbcon snd_seq_device 6888 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq bitblit 5811 1 fbcon uvcvideo 62883 0 fglrx 2353486 32 joydev 11104 0 softcursor 1565 1 bitblit snd 71283 19 snd_hda_codec_idt,snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device videodev 40550 1 uvcvideo vga16fb 12757 1 arc4 1473 2 sdhci_pci 6700 0 v4l1_compat 15495 2 uvcvideo,videodev vgastate 9857 1 vga16fb soundcore 8052 1 snd psmouse 65040 0 video 20623 0 v4l2_compat_ioctl32 11892 1 videodev sdhci 17960 1 sdhci_pci serio_raw 4918 0 output 2503 1 video snd_page_alloc 8500 2 snd_hda_intel,snd_pcm dell_wmi 2177 0 dell_laptop 7973 0 dcdbas 6886 1 dell_laptop b43 182290 0 mac80211 238896 1 b43 cfg80211 148341 2 b43,mac80211 led_class 3764 2 sdhci,b43 intel_agp 29319 0 lp 9336 0 parport 37160 2 ppdev,lp usbhid 41116 0 hid 83888 1 usbhid ohci1394 30260 0 ieee1394 94771 1 ohci1394 ahci 38030 4 ssb 45427 1 b43 tg3 122382 0 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91864 r8192 d22824 u1048576 [ 0.000000] pcpu-alloc: s91864 r8192 d22824 u1048576 alloc=1*2097152 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.013876] Initializing cgroup subsys net_cls [ 0.013922] CPU0: Thermal monitoring enabled (TM2) [ 0.020000] CPU1: Thermal monitoring enabled (TM2) [ 0.407227] audit: initializing netlink socket (disabled) [ 0.533318] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.533327] ACPI: Thermal Zone [TZ00] (52 C) [ 0.535422] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.535429] ACPI: Thermal Zone [TZ01] (45 C) [ 0.537284] thermal LNXTHERM:03: registered as thermal_zone2 [ 0.537295] ACPI: Thermal Zone [TZ02] (61 C) [ 0.542286] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.611862] device-mapper: multipath: version 1.1.0 loaded [ 0.611864] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.730311] tg3.c:v3.102 (September 1, 2009) [ 0.730489] tg3 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.730502] tg3 0000:08:00.0: setting latency timer to 64 [ 0.733345] b43-pci-bridge 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.733359] b43-pci-bridge 0000:04:00.0: setting latency timer to 64 [ 0.860310] ssb: Sonics Silicon Backplane found on PCI device 0000:04:00.0 [ 2.071587] eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:22:19:db:c9:de [ 2.071591] eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 2.071593] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.071595] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 3.763366] Adding 1952760k swap on /dev/sda1. Priority:-1 extents:1 across:1952760k [ 5.772695] b43-phy0: Broadcom 4312 WLAN found (core revision 15) [ 6.552360] phy0: Selected rate control algorithm 'minstrel' [ 6.553044] Registered led device: b43-phy0::tx [ 6.553061] Registered led device: b43-phy0::rx [ 6.553085] Registered led device: b43-phy0::radio [ 7.223894] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 15.902770] b43 ssb0:0: firmware: requesting b43/ucode15.fw [ 16.247852] b43 ssb0:0: firmware: requesting b43/lp0initvals15.fw [ 16.416344] b43 ssb0:0: firmware: requesting b43/lp0bsinitvals15.fw [ 16.580263] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 30.391750] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 [ 30.391757] b43-phy0 ERROR: This device does not support DMA on your system. Please use PIO instead. [ 30.391761] b43-phy0: Controller RESET (DMA error) ... [ 30.720349] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 44.481169] b43-phy0: Controller restarted [ 44.482017] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 44.512498] tg3 0000:08:00.0: irq 31 for MSI/MSI-X [ 44.614867] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 60.442768] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 74.414561] wlan0: Trigger new scan to find an IBSS to join [ 75.497758] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 77.040109] wlan0: Trigger new scan to find an IBSS to join [ 81.012596] wlan0: Trigger new scan to find an IBSS to join [ 83.012614] wlan0: Creating new IBSS network, BSSID 56:74:ff:a3:56:db [ 85.092619] wlan0: no IPv6 routers present [ 113.012564] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 138.216053] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 138.216058] tg3: eth0: Flow control is off for TX and off for RX. [ 138.216781] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 143.040081] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 148.800044] eth0: no IPv6 routers present [ 203.010163] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 233.045109] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 293.010167] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 323.040160] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 383.010154] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 413.040180] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 473.040163] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 533.040164] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 593.040150] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 653.010155] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 713.010149] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 773.040147] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 833.040154] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 893.012632] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 923.050046] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 983.040163] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1043.040137] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1103.040158] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1163.040189] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1223.010149] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1240.219629] tg3: eth0: Link is down. [ 1283.012636] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1287.010130] wlan0: Trigger new scan to find an IBSS to join [ 1291.012619] wlan0: Trigger new scan to find an IBSS to join [ 1293.050134] wlan0: Trigger new scan to find an IBSS to join [ 1293.090053] wlan0: Creating new IBSS network, BSSID f6:a6:15:8c:64:28 [ 1309.312471] wlan0: Trigger new scan to find an IBSS to join [ 1310.782873] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 1324.564100] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1324.610713] wlan0: direct probe to AP 00:1c:4a:3a:55:cd (try 1) [ 1324.610806] wlan0: deauthenticating from 00:1c:4a:3a:55:cd by local choice (reason=3) [ 1324.610925] wlan0: direct probe to AP 00:1c:4a:3a:55:cd (try 1) [ 1324.614938] wlan0: direct probe responded [ 1324.614945] wlan0: authenticate with AP 00:1c:4a:3a:55:cd (try 1) [ 1324.618829] wlan0: authenticated [ 1324.618859] wlan0: associate with AP 00:1c:4a:3a:55:cd (try 1) [ 1324.624753] wlan0: RX AssocResp from 00:1c:4a:3a:55:cd (capab=0x411 status=0 aid=1) [ 1324.624758] wlan0: associated [ 1324.626311] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 1335.050107] wlan0: no IPv6 routers present [ 1335.920870] wlan0: direct probe to AP 00:1c:4a:3a:55:cd (try 1) [ 1336.120147] wlan0: direct probe to AP 00:1c:4a:3a:55:cd (try 2) [ 1336.320167] wlan0: direct probe to AP 00:1c:4a:3a:55:cd (try 3) [ 1336.522632] wlan0: direct probe to AP 00:1c:4a:3a:55:cd timed out [ 1349.680350] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 1363.494819] wlan0: Trigger new scan to find an IBSS to join [ 1366.044730] wlan0: Trigger new scan to find an IBSS to join [ 1370.040177] wlan0: Trigger new scan to find an IBSS to join [ 1372.050172] wlan0: Creating new IBSS network, BSSID 8e:4c:b0:cb:b9:4a [ 1373.510031] wlan0: no IPv6 routers present [ 1427.040139] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1487.010747] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1517.040176] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1552.444111] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 1552.444116] tg3: eth0: Flow control is off for TX and off for RX. [ 1577.010172] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1637.010140] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1667.040128] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1727.040139] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1787.040146] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1847.040062] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1907.040166] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 1967.040075] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2027.010157] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2087.040051] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2147.012622] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2207.010135] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2267.010172] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2327.040164] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2373.673159] wlan0: Trigger new scan to find an IBSS to join [ 2375.110385] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 2379.332168] tg3: eth0: Link is down. [ 2388.911605] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2388.930538] wlan0: direct probe to AP 00:1c:4a:3a:55:cd (try 1) [ 2388.934823] wlan0: direct probe responded [ 2388.934829] wlan0: authenticate with AP 00:1c:4a:3a:55:cd (try 1) [ 2388.937177] wlan0: authenticated [ 2388.990933] wlan0: associate with AP 00:1c:4a:3a:55:cd (try 1) [ 2388.991619] wlan0: deauthenticating from 00:1c:4a:3a:55:cd by local choice (reason=3) [ 2388.991898] wlan0: direct probe to AP 00:1c:4a:3a:55:cd (try 1) [ 2388.996055] wlan0: direct probe responded [ 2388.996062] wlan0: authenticate with AP 00:1c:4a:3a:55:cd (try 1) [ 2388.998164] wlan0: authenticated [ 2388.998198] wlan0: associate with AP 00:1c:4a:3a:55:cd (try 1) [ 2389.003806] wlan0: RX AssocResp from 00:1c:4a:3a:55:cd (capab=0x411 status=0 aid=1) [ 2389.003810] wlan0: associated [ 2389.020932] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2398.190135] b43-phy0 ERROR: MAC suspend failed [ 2399.070161] b43-phy0 ERROR: MAC suspend failed [ 2399.510051] wlan0: no IPv6 routers present [ 2400.170166] b43-phy0 ERROR: MAC suspend failed [ 2401.052545] b43-phy0 ERROR: MAC suspend failed [ 2401.942584] b43-phy0 ERROR: MAC suspend failed [ 2402.822635] b43-phy0 ERROR: MAC suspend failed [ 2404.144333] wlan0: direct probe to AP 00:1c:4a:3a:55:cd (try 1) [ 2404.340079] wlan0: direct probe to AP 00:1c:4a:3a:55:cd (try 2) [ 2404.542584] wlan0: direct probe to AP 00:1c:4a:3a:55:cd (try 3) [ 2404.740131] wlan0: direct probe to AP 00:1c:4a:3a:55:cd timed out [ 2412.682849] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 2426.520462] wlan0: Trigger new scan to find an IBSS to join [ 2429.010148] wlan0: Trigger new scan to find an IBSS to join [ 2433.043086] wlan0: Trigger new scan to find an IBSS to join [ 2435.012551] wlan0: Creating new IBSS network, BSSID be:00:d8:89:17:b0 [ 2436.580116] wlan0: no IPv6 routers present [ 2436.792991] wlan0: Trigger new scan to find an IBSS to join [ 2438.270256] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 2452.083952] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2452.103189] wlan0: direct probe to AP 00:1c:4a:3a:55:cd (try 1) [ 2452.103573] wlan0: deauthenticating from 00:1c:4a:3a:55:cd by local choice (reason=3) [ 2452.103915] wlan0: direct probe to AP 00:1c:4a:3a:55:cd (try 1) [ 2452.303303] wlan0: direct probe to AP 00:1c:4a:3a:55:cd (try 2) [ 2452.306516] wlan0: direct probe responded [ 2452.306519] wlan0: authenticate with AP 00:1c:4a:3a:55:cd (try 1) [ 2452.308511] wlan0: authenticated [ 2452.308552] wlan0: associate with AP 00:1c:4a:3a:55:cd (try 1) [ 2452.314920] wlan0: RX AssocResp from 00:1c:4a:3a:55:cd (capab=0x411 status=0 aid=1) [ 2452.314923] wlan0: associated [ 2452.316020] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2456.982652] b43-phy0 ERROR: MAC suspend failed [ 2460.450042] b43-phy0 ERROR: MAC suspend failed [ 2463.112534] wlan0: no IPv6 routers present [ 2463.192631] b43-phy0 ERROR: MAC suspend failed [ 2471.440147] b43-phy0 ERROR: MAC suspend failed [ 2472.382170] b43-phy0 ERROR: MAC suspend failed [ 2473.320065] b43-phy0 ERROR: MAC suspend failed [ 2476.340307] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 2490.155754] wlan0: Trigger new scan to find an IBSS to join [ 2494.040145] wlan0: Trigger new scan to find an IBSS to join [ 2500.802531] wlan0: no IPv6 routers present [ 2505.600371] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 2519.441410] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2519.442257] wlan0: direct probe to AP 00:1c:4a:3a:55:cd (try 1) [ 2519.445206] wlan0: direct probe responded [ 2519.445213] wlan0: authenticate with AP 00:1c:4a:3a:55:cd (try 1) [ 2519.447306] wlan0: authenticated [ 2519.460854] wlan0: associate with AP 00:1c:4a:3a:55:cd (try 1) [ 2519.466383] wlan0: RX AssocResp from 00:1c:4a:3a:55:cd (capab=0x411 status=0 aid=1) [ 2519.466389] wlan0: associated [ 2519.467950] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2525.341794] b43-phy0 ERROR: MAC suspend failed [ 2526.830122] b43-phy0 ERROR: MAC suspend failed [ 2528.450154] b43-phy0 ERROR: MAC suspend failed [ 2529.330188] b43-phy0 ERROR: MAC suspend failed [ 2530.120060] wlan0: no IPv6 routers present [ 2530.210127] b43-phy0 ERROR: MAC suspend failed [ 2531.292655] b43-phy0 ERROR: MAC suspend failed [ 2531.833064] wlan0: direct probe to AP 00:1c:4a:3a:55:cd (try 1) [ 2532.032563] wlan0: direct probe to AP 00:1c:4a:3a:55:cd (try 2) [ 2532.230780] wlan0: direct probe to AP 00:1c:4a:3a:55:cd (try 3) [ 2532.430150] wlan0: direct probe to AP 00:1c:4a:3a:55:cd timed out [ 2533.230150] b43-phy0 ERROR: MAC suspend failed [ 2541.682857] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 2547.806614] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 2547.806619] tg3: eth0: Flow control is off for TX and off for RX. [ 2555.513950] wlan0: Trigger new scan to find an IBSS to join [ 2558.010158] wlan0: Trigger new scan to find an IBSS to join [ 2562.040173] wlan0: Trigger new scan to find an IBSS to join [ 2564.042700] wlan0: Creating new IBSS network, BSSID 92:cc:dd:0f:7e:0d [ 2565.930134] wlan0: no IPv6 routers present [ 2594.010144] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2654.050128] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2714.010145] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2744.040173] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2804.010155] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2834.040172] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2894.010131] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 2954.012645] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3014.010163] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3074.010172] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3134.050042] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3194.046645] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3254.040145] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3314.040058] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3351.540168] tg3: eth0: Link is down. [ 3374.040065] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3434.040154] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3494.040159] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3554.040143] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3614.010162] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3674.040164] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3734.040162] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3794.040143] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3904.050076] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3964.010180] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 3994.040153] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4054.012659] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4114.012644] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4174.042694] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4234.012662] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [ 4294.010263] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true # This file is installed into /etc/NetworkManager, and is loaded by # NetworkManager by default. To override, specify: '--config file' # during NM startup. This can be done by appending to DAEMON_OPTS in # the file: # # /etc/default/NetworkManager # [main] plugins=ifupdown,keyfile [ifupdown] managed=false
Moderiert von "Elektronenblitz63":
Titel des Beitrags angepasst.