lspci -nnk | grep "VGA\|'Kern'\|3D\|Display" -A2
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0402] (rev 06)
DeviceName: Onboard IGD
Subsystem: ASUSTeK Computer Inc. Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [1043:8534]
xrandr --prop
Screen 0: minimum 8 x 8, current 1600 x 1200, maximum 32767 x 32767
HDMI1 disconnected (normal left inverted right x axis y axis)
aspect ratio: Automatic
supported: Automatic, 4:3, 16:9
Broadcast RGB: Automatic
supported: Automatic, Full, Limited 16:235
audio: auto
supported: force-dvi, off, auto, on
HDMI2 disconnected (normal left inverted right x axis y axis)
aspect ratio: Automatic
supported: Automatic, 4:3, 16:9
Broadcast RGB: Automatic
supported: Automatic, Full, Limited 16:235
audio: auto
supported: force-dvi, off, auto, on
VGA1 connected primary 1600x1200+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1600x1200 59.87*+
1024x768 60.00
800x600 60.32 56.25
848x480 60.00
640x480 59.94
1600x1200_60.00 59.87
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
/var/log/Xorg.0.log
[ 3.203]
X.Org X Server 1.18.3
Release Date: 2016-04-04
[ 3.203] X Protocol Version 11, Revision 0
[ 3.203] Build Operating System: Linux 3.13.0-92-generic x86_64 Ubuntu
[ 3.203] Current Operating System: Linux ks-privat 4.4.0-36-generic #55-Ubuntu SMP Thu Aug 11 18:01:55 UTC 2016 x86_64
[ 3.203] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-36-generic root=UUID=ff0d61fc-d134-4a35-839e-2ac57ca9b15e ro quiet splash vt.handoff=7
[ 3.203] Build Date: 22 July 2016 07:50:34AM
[ 3.203] xorg-server 2:1.18.3-1ubuntu2.3 (For technical support please see http://www.ubuntu.com/support)
[ 3.203] Current version of pixman: 0.33.6
[ 3.203] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3.203] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.203] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 14 17:20:17 2016
[ 3.203] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 3.205] (==) No Layout section. Using the first Screen section.
[ 3.205] (==) No screen section available. Using defaults.
[ 3.205] (**) |-->Screen "Default Screen Section" (0)
[ 3.205] (**) | |-->Monitor "<default monitor>"
[ 3.205] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3.205] (==) Automatically adding devices
[ 3.205] (==) Automatically enabling devices
[ 3.205] (==) Automatically adding GPU devices
[ 3.205] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 3.205] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 3.205] Entry deleted from font path.
[ 3.205] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 3.205] Entry deleted from font path.
[ 3.205] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 3.205] Entry deleted from font path.
[ 3.205] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 3.205] Entry deleted from font path.
[ 3.205] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 3.205] Entry deleted from font path.
[ 3.205] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 3.205] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 3.205] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.205] (II) Loader magic: 0x55ee3c6a9da0
[ 3.205] (II) Module ABI versions:
[ 3.205] X.Org ANSI C Emulation: 0.4
[ 3.205] X.Org Video Driver: 20.0
[ 3.205] X.Org XInput driver : 22.1
[ 3.205] X.Org Server Extension : 9.0
[ 3.206] (++) using VT number 7
[ 3.206] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 3.206] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 3.207] (--) PCI:*(0:0:2:0) 8086:0402:1043:8534 rev 6, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 3.207] (II) LoadModule: "glx"
[ 3.207] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3.217] (II) Module glx: vendor="X.Org Foundation"
[ 3.217] compiled for 1.18.3, module version = 1.0.0
[ 3.218] ABI class: X.Org Server Extension, version 9.0
[ 3.218] (==) AIGLX enabled
[ 3.218] (==) Matched intel as autoconfigured driver 0
[ 3.218] (==) Matched intel as autoconfigured driver 1
[ 3.218] (==) Matched modesetting as autoconfigured driver 2
[ 3.218] (==) Matched fbdev as autoconfigured driver 3
[ 3.218] (==) Matched vesa as autoconfigured driver 4
[ 3.218] (==) Assigned the driver to the xf86ConfigLayout
[ 3.218] (II) LoadModule: "intel"
[ 3.218] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 3.220] (II) Module intel: vendor="X.Org Foundation"
[ 3.221] compiled for 1.18.3, module version = 2.99.917
[ 3.221] Module class: X.Org Video Driver
[ 3.221] ABI class: X.Org Video Driver, version 20.0
[ 3.221] (II) LoadModule: "modesetting"
[ 3.221] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 3.221] (II) Module modesetting: vendor="X.Org Foundation"
[ 3.221] compiled for 1.18.3, module version = 1.18.3
[ 3.221] Module class: X.Org Video Driver
[ 3.221] ABI class: X.Org Video Driver, version 20.0
[ 3.221] (II) LoadModule: "fbdev"
[ 3.221] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 3.221] (II) Module fbdev: vendor="X.Org Foundation"
[ 3.221] compiled for 1.18.1, module version = 0.4.4
[ 3.221] Module class: X.Org Video Driver
[ 3.221] ABI class: X.Org Video Driver, version 20.0
[ 3.221] (II) LoadModule: "vesa"
[ 3.222] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 3.222] (II) Module vesa: vendor="X.Org Foundation"
[ 3.222] compiled for 1.18.1, module version = 2.3.4
[ 3.222] Module class: X.Org Video Driver
[ 3.222] ABI class: X.Org Video Driver, version 20.0
[ 3.222] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 3.222] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 3.222] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 3.222] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 3.222] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 3.222] (II) FBDEV: driver for framebuffer: fbdev
[ 3.222] (II) VESA: driver for VESA chipsets: vesa
[ 3.223] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010
[ 3.223] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1.1 (Timo Aaltonen <tjaalton@debian.org>)
[ 3.223] (II) intel(0): SNA compiled for use with valgrind
[ 3.223] (WW) Falling back to old probe method for modesetting
[ 3.223] (WW) Falling back to old probe method for fbdev
[ 3.223] (II) Loading sub module "fbdevhw"
[ 3.223] (II) LoadModule: "fbdevhw"
[ 3.223] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 3.224] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 3.224] compiled for 1.18.3, module version = 0.0.2
[ 3.224] ABI class: X.Org Video Driver, version 20.0
[ 3.224] (WW) Falling back to old probe method for vesa
[ 3.224] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 3.224] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2; using a maximum of 2 threads
[ 3.224] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3.224] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 3.224] (==) intel(0): RGB weight 888
[ 3.224] (==) intel(0): Default visual is TrueColor
[ 3.224] (II) intel(0): Output VGA1 has no monitor section
[ 3.224] (II) intel(0): Enabled output VGA1
[ 3.224] (II) intel(0): Output HDMI1 has no monitor section
[ 3.224] (II) intel(0): Enabled output HDMI1
[ 3.224] (II) intel(0): Output HDMI2 has no monitor section
[ 3.224] (II) intel(0): Enabled output HDMI2
[ 3.224] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 3.224] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 3.224] (II) intel(0): Enabled output VIRTUAL1
[ 3.224] (--) intel(0): Output VGA1 using initial mode 1024x768 on pipe 0
[ 3.224] (==) intel(0): TearFree disabled
[ 3.224] (==) intel(0): DPI set to (96, 96)
[ 3.224] (II) Loading sub module "dri2"
[ 3.224] (II) LoadModule: "dri2"
[ 3.224] (II) Module "dri2" already built-in
[ 3.224] (II) Loading sub module "present"
[ 3.224] (II) LoadModule: "present"
[ 3.224] (II) Module "present" already built-in
[ 3.224] (II) UnloadModule: "modesetting"
[ 3.224] (II) Unloading modesetting
[ 3.225] (II) UnloadModule: "fbdev"
[ 3.225] (II) Unloading fbdev
[ 3.225] (II) UnloadSubModule: "fbdevhw"
[ 3.225] (II) Unloading fbdevhw
[ 3.225] (II) UnloadModule: "vesa"
[ 3.225] (II) Unloading vesa
[ 3.225] (==) Depth 24 pixmap format is 32 bpp
[ 3.227] (II) intel(0): SNA initialized with Haswell (gen7.5, gt1) backend
[ 3.227] (==) intel(0): Backing store enabled
[ 3.227] (==) intel(0): Silken mouse enabled
[ 3.227] (II) intel(0): HW Cursor enabled
[ 3.227] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 3.228] (==) intel(0): DPMS enabled
[ 3.228] (==) intel(0): Display hotplug detection enabled
[ 3.228] (II) intel(0): [DRI2] Setup complete
[ 3.228] (II) intel(0): [DRI2] DRI driver: i965
[ 3.228] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 3.228] (II) intel(0): direct rendering: DRI2 enabled
[ 3.228] (II) intel(0): hardware support for Present enabled
[ 3.228] (--) RandR disabled
[ 3.230] (II) SELinux: Disabled on system
[ 3.243] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 3.243] (II) AIGLX: enabled GLX_ARB_create_context
[ 3.243] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 3.243] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 3.243] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 3.243] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 3.243] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 3.243] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 3.243] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 3.243] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 3.243] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 3.243] (II) AIGLX: Loaded and initialized i965
[ 3.243] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3.244] (II) intel(0): switch to mode 1024x768@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 3.245] (II) intel(0): Setting screen physical size to 270 x 203
[ 3.264] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 3.264] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3.264] (II) LoadModule: "evdev"
[ 3.264] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3.265] (II) Module evdev: vendor="X.Org Foundation"
[ 3.265] compiled for 1.18.1, module version = 2.10.1
[ 3.265] Module class: X.Org XInput Driver
[ 3.265] ABI class: X.Org XInput driver, version 22.1
[ 3.265] (II) Using input driver 'evdev' for 'Power Button'
[ 3.265] (**) Power Button: always reports core events
[ 3.265] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 3.265] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3.265] (--) evdev: Power Button: Found keys
[ 3.265] (II) evdev: Power Button: Configuring as keyboard
[ 3.265] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 3.265] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 3.265] (**) Option "xkb_rules" "evdev"
[ 3.265] (**) Option "xkb_model" "pc105"
[ 3.265] (**) Option "xkb_layout" "de"
[ 3.276] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 3.276] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3.276] (II) Using input driver 'evdev' for 'Video Bus'
[ 3.276] (**) Video Bus: always reports core events
[ 3.276] (**) evdev: Video Bus: Device: "/dev/input/event3"
[ 3.276] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 3.276] (--) evdev: Video Bus: Found keys
[ 3.276] (II) evdev: Video Bus: Configuring as keyboard
[ 3.276] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
[ 3.276] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 3.276] (**) Option "xkb_rules" "evdev"
[ 3.276] (**) Option "xkb_model" "pc105"
[ 3.276] (**) Option "xkb_layout" "de"
[ 3.276] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 3.276] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3.276] (II) Using input driver 'evdev' for 'Power Button'
[ 3.276] (**) Power Button: always reports core events
[ 3.276] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 3.276] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3.276] (--) evdev: Power Button: Found keys
[ 3.276] (II) evdev: Power Button: Configuring as keyboard
[ 3.276] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 3.276] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 3.276] (**) Option "xkb_rules" "evdev"
[ 3.276] (**) Option "xkb_model" "pc105"
[ 3.276] (**) Option "xkb_layout" "de"
[ 3.277] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event5)
[ 3.277] (II) No input driver specified, ignoring this device.
[ 3.277] (II) This device may have been added with another device file.
[ 3.277] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/event4)
[ 3.277] (**) Logitech Optical USB Mouse: Applying InputClass "evdev pointer catchall"
[ 3.277] (II) Using input driver 'evdev' for 'Logitech Optical USB Mouse'
[ 3.277] (**) Logitech Optical USB Mouse: always reports core events
[ 3.277] (**) evdev: Logitech Optical USB Mouse: Device: "/dev/input/event4"
[ 3.332] (--) evdev: Logitech Optical USB Mouse: Vendor 0x46d Product 0xc016
[ 3.332] (--) evdev: Logitech Optical USB Mouse: Found 3 mouse buttons
[ 3.332] (--) evdev: Logitech Optical USB Mouse: Found scroll wheel(s)
[ 3.332] (--) evdev: Logitech Optical USB Mouse: Found relative axes
[ 3.332] (--) evdev: Logitech Optical USB Mouse: Found x and y relative axes
[ 3.332] (II) evdev: Logitech Optical USB Mouse: Configuring as mouse
[ 3.332] (II) evdev: Logitech Optical USB Mouse: Adding scrollwheel support
[ 3.332] (**) evdev: Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
[ 3.332] (**) evdev: Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3.332] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:046D:C016.0001/input/input4/event4"
[ 3.332] (II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE, id 9)
[ 3.332] (II) evdev: Logitech Optical USB Mouse: initialized for relative axes.
[ 3.332] (**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1
[ 3.332] (**) Logitech Optical USB Mouse: (accel) acceleration profile 0
[ 3.332] (**) Logitech Optical USB Mouse: (accel) acceleration factor: 2.000
[ 3.332] (**) Logitech Optical USB Mouse: (accel) acceleration threshold: 4
[ 3.332] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/mouse0)
[ 3.332] (II) No input driver specified, ignoring this device.
[ 3.332] (II) This device may have been added with another device file.
[ 3.332] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[ 3.332] (II) No input driver specified, ignoring this device.
[ 3.332] (II) This device may have been added with another device file.
[ 3.332] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event6)
[ 3.332] (II) No input driver specified, ignoring this device.
[ 3.332] (II) This device may have been added with another device file.
[ 3.332] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event7)
[ 3.332] (II) No input driver specified, ignoring this device.
[ 3.332] (II) This device may have been added with another device file.
[ 3.333] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
[ 3.333] (II) No input driver specified, ignoring this device.
[ 3.333] (II) This device may have been added with another device file.
[ 3.333] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event9)
[ 3.333] (II) No input driver specified, ignoring this device.
[ 3.333] (II) This device may have been added with another device file.
[ 3.333] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event11)
[ 3.333] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 3.333] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 3.333] (**) Eee PC WMI hotkeys: always reports core events
[ 3.333] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event11"
[ 3.333] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 3.333] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 3.333] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 3.333] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input11/event11"
[ 3.333] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 10)
[ 3.333] (**) Option "xkb_rules" "evdev"
[ 3.333] (**) Option "xkb_model" "pc105"
[ 3.333] (**) Option "xkb_layout" "de"
[ 3.333] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 3.333] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 3.333] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 3.333] (**) AT Translated Set 2 keyboard: always reports core events
[ 3.333] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 3.333] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 3.333] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 3.333] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 3.333] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 3.333] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 3.333] (**) Option "xkb_rules" "evdev"
[ 3.333] (**) Option "xkb_model" "pc105"
[ 3.333] (**) Option "xkb_layout" "de"
[ 3.397] (II) intel(0): resizing framebuffer to 1600x1200
[ 3.409] (II) intel(0): switch to mode 1600x1200@59.9 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none