mike7000
Anmeldungsdatum: 28. November 2011
Beiträge: 114
|
Hallo, ich habe meinen Fileserver erneuern müssen, Umstellung auf 18.04. LTS! Ich habe eine Freigabe auf dem Fileserver A = FreigabeServer erstellt. Es kann der Fileserver A und ein Client im Netzwerk Client B darauf zugreifen. Ich habe eine Freigabe auf dem Client B = Freigabe asus2 erstellt. Es kann der Client B und der Fileserver A darauf zugreifen. Das ist auch ja so okay ☺ Nun habe ich auf dem Fileserver A eine zweite Festplatte eingebaut, das war auch immer so. Client B konnte immer darauf zugreifen. Leider musste ich ja nun Fileserver A neu installieren. Irgendwie passt das mit der Freigabe hier nicht mehr. Die Freigabe heißt ED1 auf sdb1. Leider kann ich diese nicht im Netzwerk mehr sehen. Wenn ich diese auf Fileserver A freigeben möchte bekomme ich die Meldung:
net usershare gab den Fehler 255 zurück. net usershare add cannit share path/media/.... wo muss ich hier schauen. Schriebrechte hat die ganze Festplatte auf Fileserver A mit Chmod 777. VG
Mike Moderiert von ChickenLipsRfun2eat: ] Thema in einen passenden Forenbereich verschoben. Bitte beachte die als wichtig markierten Themen („Welche Themen gehören hier her und welche nicht?“) in jedem Forenbereich. Danke.
|
mike7000
(Themenstarter)
Anmeldungsdatum: 28. November 2011
Beiträge: 114
|
Hallo, ich habe zum obigen Thema Samba Server Konfiguration installiert. Wird als installiert angezeigt im Softwarecenter. Leider kann ich dies nicht aufrufen bzw. nicht mit der Suche finden um es zu benutzen - langsam bin ich echt verzweifelt 😢
|
chr123
Anmeldungsdatum: 19. Juli 2018
Beiträge: 1632
|
Zeige bitte mal vom Fileserver A folgende Ausgaben:
| mount | grep sdb
testparm
smbclient -L localhost
net usershare info
sudo pdbedit -L
|
|
mike7000
(Themenstarter)
Anmeldungsdatum: 28. November 2011
Beiträge: 114
|
Hi, sorry- komme nun erst dazu! ~$ mount | grep sdb
/dev/sdb1 on /media/sguhl/ED1 type ext4 (rw,nosuid,nodev,relatime,uhelper=udisks testparm
Load smb config files from /etc/samba/smb.conf
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
WARNING: The "syslog" option is deprecated
Processing section "[printers]"
Processing section "[print$]"
Processing section "[ED1]"
Global parameter workgroup found in service section!
Loaded services file OK.
Server role: ROLE_STANDALONE smbclient -L localhost
Sharename Type Comment
--------- ---- -------
print$ Disk Printer Drivers
ED1 Disk ich
IPC$ IPC IPC Service (ServerGuhl server (Samba, Ubuntu))
Brother_MFC_J6520DW Printer
ED Disk
Freigabe_Server Disk
Reconnecting with SMB1 for workgroup listing.
Server Comment
--------- -------
Workgroup Master
--------- -------
WORKGROUP FRITZ-NAS net usershare info
[Freigabe_Server]
path=/home/sguhl/Freigabe_Server
comment=
usershare_acl=Everyone:F,
guest_ok=n
info_fn: file /var/lib/samba/usershares/test is not a well formed usershare file sudo pdbedit -L
asus2:1001:asus2 asus2 ist der der auf die Freigabe ED1 zugreifen soll! Es sieht nun etwas anders aus die Freigabe ist für asus2 zu sehen aber es kommt die Meldung:
Einhängen der Windows-Freigabe (es ist ja ein Ubuntu 16.04. LTS Rechner) ist fehlgeschlagen: Keine Berechtigung. Hoffe um Hilfe 😢 VG
|
chr123
Anmeldungsdatum: 19. Juli 2018
Beiträge: 1632
|
Was wir wissen:
du verwendest einmal die smb.conf für globale Freigaben (ED1) und net usershare für persönliche Freigaben (Freigabe_Server) es gibt zwar noch eine dritte Freigabe (ED), die aber nicht in der smb.conf steht. Eventuell wurde die Freigabe von einem anderen Benutzer als persönliche Freigabe erstellt der smb-Benutzer asus2 ist in der Samba Benutzerdatenbank hinterlegt
Wenn der Zugriff nun nicht funktioniert, kann es entweder daran liegen, dass der Benutzer asus2 keinen Zugriff auf den Pfad der Freigabe im lokalen System hat:
| getfacl /media/sguhl/ED1
getfacl /media/sguhl
grep asus /etc/passwd
|
Oder dass die Freigabe in der smb.conf nicht den Benutzer asus enthält:
| cat /etc/samba/smb.conf
smbclient -L localhost -U asus
|
|
mike7000
(Themenstarter)
Anmeldungsdatum: 28. November 2011
Beiträge: 114
|
Hallo, es funktioniert leider nicht! Was soll ich tun? VG
Mike
|
chr123
Anmeldungsdatum: 19. Juli 2018
Beiträge: 1632
|
Poste mal bitte die Ausgaben aus dem vorherigen Beitrag.
|
mike7000
(Themenstarter)
Anmeldungsdatum: 28. November 2011
Beiträge: 114
|
Jau gerne: asus2@asus:~$ cat /etc/samba/smb.conf
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
# - When such options are commented with ";", the proposed setting
# differs from the default Samba behaviour
# - When commented with "#", the proposed setting is the default
# behaviour of Samba but the option is considered important
# enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
#======================= Global Settings =======================
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP
# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
# wins support = no
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no
#### Networking ####
# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0
# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Cap the size of the individual log files (in KiB).
max log size = 1000
# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
# syslog only = no
# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0
# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
server role = standalone server
# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam
obey pam restrictions = yes
# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes
# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes
# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user
########## Domains ###########
#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#
# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U
# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd
# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g
############ Misc ############
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash
# Setup usershare options to enable non-root users to share folders
# with the net usershare command.
# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100
# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes
#======================= Share Definitions =======================
# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
; comment = Home Directories
; browseable = no
# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
; read only = yes
# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
; create mask = 0700
# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
; directory mask = 0700
# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
; valid users = %S
# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes
# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700
[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
guest ok = no
read only = yes
create mask = 0700
# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
; write list = root, @lpadmin
WARNING: The "syslog" option is deprecated
Enter asus's password:
Domain=[WORKGROUP] OS=[Windows 6.1] Server=[Samba 4.3.11-Ubuntu]
Sharename Type Comment
--------- ---- -------
print$ Disk Printer Drivers
IPC$ IPC IPC Service (asus server (Samba, Ubuntu))
MFC-J6520DW Printer Brother MFC-J6520DW
MFCJ6520DW Printer MFCJ6520DW
PDF Printer PDF
Freigabe_asus2 Disk
Domain=[WORKGROUP] OS=[Windows 6.1] Server=[Samba 4.3.11-Ubuntu]
Server Comment
--------- -------
ASUS asus server (Samba, Ubuntu)
FRITZ-NAS FRITZ!Box
Workgroup Master
--------- -------
WORKGROUP FRITZ-NAS
|
chr123
Anmeldungsdatum: 19. Juli 2018
Beiträge: 1632
|
Das ist aber nicht der Fileserver A?
|
mike7000
(Themenstarter)
Anmeldungsdatum: 28. November 2011
Beiträge: 114
|
Stimmt - sorry falscher Rechner! sguhl@ServerGuhl:~$ cat /etc/samba/smb.conf
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
# - When such options are commented with ";", the proposed setting
# differs from the default Samba behaviour
# - When commented with "#", the proposed setting is the default
# behaviour of Samba but the option is considered important
# enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
#======================= Global Settings =======================
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP
# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
# wins support = no
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no
#### Networking ####
# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0
# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Cap the size of the individual log files (in KiB).
max log size = 1000
# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
# syslog only = no
# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0
# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
server role = standalone server
# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam
obey pam restrictions = yes
# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes
# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes
# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user
########## Domains ###########
#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#
# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U
# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd
# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g
############ Misc ############
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash
# Setup usershare options to enable non-root users to share folders
# with the net usershare command.
# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100
# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes
#======================= Share Definitions =======================
# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
; comment = Home Directories
; browseable = no
# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
; read only = yes
# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
; create mask = 0700
# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
; directory mask = 0700
# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
; valid users = %S
# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes
# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700
[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
guest ok = no
read only = yes
create mask = 0700
# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
; write list = root, @lpadmin
[ED1]
workgroup = smb
path = /media/sguhl/ED1/ED1
read only = yes
writeable = yes
available = yes
browseable = yes
guest ok = yes
public yes
create mask = 0777
[ED]
workgroup = smb
path = /media/sguhl/ED/
read only = yes
writeable = yes
available = yes
browseable = yes
guest ok = yes
public yes
create mask = 0777
user
sguhl@ServerGuhl:~$ Und smbclient -L localhost -U asus
WARNING: The "syslog" option is deprecated
Enter WORKGROUP\asus's password:
Sharename Type Comment
--------- ---- -------
print$ Disk Printer Drivers
ED1 Disk ich
ED Disk
IPC$ IPC IPC Service (ServerGuhl server (Samba, Ubuntu))
Brother_MFC_J6520DW Printer Brother MFC-J6520DW
Freigabe_Server Disk
Reconnecting with SMB1 for workgroup listing.
Server Comment
--------- -------
Workgroup Master
--------- -------
WORKGROUP
|
chr123
Anmeldungsdatum: 19. Juli 2018
Beiträge: 1632
|
Wundert mich, daß testparm keine syntaktischen Fehler ausgewiesen hat. Ändere mal folgendes: mike7000 schrieb: sguhl@ServerGuhl:~$ cat /etc/samba/smb.conf
#
#
[ED1]
path = /media/sguhl/ED1/ED1
read only = no
valid users = asus
create mask = 0777
[ED]
path = /media/sguhl/ED/
read only = no
valid users = asus
create mask = 0777
|
mike7000
(Themenstarter)
Anmeldungsdatum: 28. November 2011
Beiträge: 114
|
Hi, nun kommt das Abfragefenster für den Speicherort ed1. Für den Speicherort ed1 auf serverguhl.local wird ein Passwort benötigt. Hier ist aber der Benutzer asus2 vorgegeben und der ist ja auch der angemeldete user auf dem Clientrechner. Domäne habe ich gelassen mit WORKGROUP, Passwort eingetragen, verbinden aber leider kein Zugriff möglich!!! Sieht aber ja schon besser aus! Ich habe in der smb.conf natürlich auch mal den user asus2 eingetragen und Samba neu gestartet - geht aber leider auch nicht. Kann ja eigentlich nur noch in den Freigabe-Einstellungen der smb.conf liegen ...? VG
Mike
|
chr123
Anmeldungsdatum: 19. Juli 2018
Beiträge: 1632
|
Sorry es muss natürlich asus2 in der smb.conf lauten. Da der Benutzer angelegt ist, kann es dann nur noch an den lokalen Rechten liegen. Sprich kann asus2 auf die Verzeichnisse zugreifen?
getfacl /media/sguhl/ED1/ED1
getfacl /media/sguhl/ED1
getfacl /media/sguhl/ED
getfacl /media/sguhl
|
mike7000
(Themenstarter)
Anmeldungsdatum: 28. November 2011
Beiträge: 114
|
Hi, bei allen Abfragen kommt der Hinweis: Datei oder Verzeichnis nicht gefunden Oh man... 😳
|
chr123
Anmeldungsdatum: 19. Juli 2018
Beiträge: 1632
|
Dann ist die Platte nicht eingehängt oder / und du bist nicht auf dem richtigen Rechner (Fileserver A).
|