Hi, ich habe ein Problem mit einem HP Compaq nx6325 (ATI IXP SB4x0 Serial ATA Controller) und einer 32GB SanDisk SSD (SDSSDRC032G). Es gelingt mir nicht Lubuntu/Ubuntu 14.04.1 (10.04.4 und 14.10 auch schon probiert) auf der SSD zu installieren, da er während des Setups meldet das keine ausreichend große Festplatte vorhanden ist (Desktop) bzw. kein passender Treiber (Alternate/Server) gefunden werden konnte. Windows 7 hingegen lässt sich problemlos installieren.
lspci:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 | 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS480/RS482/RS485 Host Bridge (rev 10) 00:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RC4xx/RS4xx PCI Bridge [int gfx] 00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RC4xx/RS4xx PCI Express Port 1 00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RC4xx/RS4xx PCI Express Port 2 00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RC4xx/RS4xx PCI Express Port 3 00:12.0 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0 Serial ATA Controller (rev 80) 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0 USB Host Controller (rev 80) 00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0 USB Host Controller (rev 80) 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0 USB2 Host Controller (rev 80) 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0 SMBus Controller (rev 82) 00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0 IDE Controller (rev 80) 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0 High Definition Audio Controller (rev 01) 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0 PCI-ISA Bridge (rev 80) 00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0 PCI-PCI Bridge (rev 80) 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS482M [Mobility Radeon Xpress 200] 02:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03) 02:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 02:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller 02:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) 02:04.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller 30:00.0 Network controller: Broadcom Corporation BCM4311 802.11a/b/g (rev 01) |
dmesg-ssd:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 | [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-32-generic (buildd@roseapple) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #57-Ubuntu SMP Tue Jul 15 03:51:12 UTC 2014 (Ubuntu 3.13.0-32.57-generic 3.13.11.4) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000077fcffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000077fd0000-0x0000000077fe55ff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000077fe5600-0x0000000077ff7fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000077ff8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffbc0000-0x00000000ffcbffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Hewlett-Packard HP Compaq nx6325 (EY344EA#ABD)/30B0, BIOS 68TT2 Ver. F.07 05/08/2007 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x77fd0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C0FFF write-protect [ 0.000000] C1000-C3FFF write-back [ 0.000000] C4000-C4FFF write-protect [ 0.000000] C5000-C7FFF write-back [ 0.000000] C8000-C8FFF write-protect [ 0.000000] C9000-CBFFF write-back [ 0.000000] CC000-CCFFF write-protect [ 0.000000] CD000-CFFFF write-back [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 base 0040000000 mask FFE0000000 write-back [ 0.000000] 2 base 0060000000 mask FFF0000000 write-back [ 0.000000] 3 base 0070000000 mask FFF8000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff] [ 0.000000] [mem 0x37800000-0x379fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff] [ 0.000000] [mem 0x34000000-0x377fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x33ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff] [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k [ 0.000000] BRK [0x01b8e000, 0x01b8efff] PGTABLE [ 0.000000] RAMDISK: [mem 0x76cb6000-0x77fcffff] [ 0.000000] Allocated new RAMDISK: [mem 0x368e4000-0x37bfd919] [ 0.000000] Move RAMDISK from [mem 0x76cb6000-0x77fcf919] to [mem 0x368e4000-0x37bfd919] [ 0.000000] ACPI: RSDP 000f7a90 000024 (v02 HP ) [ 0.000000] ACPI: XSDT 77fe57b8 00005C (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: FACP 77fe5684 0000F4 (v04 HP 0944 00000003 HP 00000001) [ 0.000000] ACPI: DSDT 77fe5a60 00F6D3 (v01 HP SB400 00010000 MSFT 0100000E) [ 0.000000] ACPI: FACS 77ff7e80 000040 [ 0.000000] ACPI: SLIC 77fe5814 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: APIC 77fe598c 000062 (v01 HP 0944 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 77fe59f0 00003C (v01 HP 0944 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 77fe5a2c 000032 (v02 HP 0944 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 77ff5133 000059 (v01 HP HPQNLP 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 77ff518c 0000F4 (v01 HP PSSTBLID 00000001 HP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1027MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] BRK [0x01b8f000, 0x01b8ffff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x37bfdfff] [ 0.000000] HighMem [mem 0x37bfe000-0x77fcffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x77fcffff] [ 0.000000] On node 0 totalpages: 491374 [ 0.000000] free_area_init_node: node 0, pgdat c1997200, node_mem_map f59e4020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 224254 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2056 pages used for memmap [ 0.000000] HighMem zone: 263122 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] SB4X0 revision 0x82 [ 0.000000] Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f59bc000 s36096 r0 d21248 u57344 [ 0.000000] pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 489590 [ 0.000000] Kernel command line: file=/cdrom/preseed/lubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- debian-installer/language=de keyboard-configuration/layoutcode?=de [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 3931768 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:00077fd0) [ 0.000000] Memory: 1913864K/1965496K available (6528K kernel code, 639K rwdata, 2760K rodata, 872K init, 924K bss, 51632K reserved, 1052488K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc19b4000 - 0xc1a8e000 ( 872 kB) [ 0.000000] .data : 0xc1660532 - 0xc19b3e80 (3406 kB) [ 0.000000] .text : 0xc1000000 - 0xc1660532 (6529 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f5008000 soft=f500a000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1795.543 MHz processor [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.08 BogoMIPS (lpj=7182172) [ 0.008010] pid_max: default: 32768 minimum: 301 [ 0.008069] Security Framework initialized [ 0.008092] AppArmor: AppArmor initialized [ 0.008095] Yama: becoming mindful. [ 0.008173] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.008177] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.008521] Initializing cgroup subsys memory [ 0.008532] Initializing cgroup subsys devices [ 0.008535] Initializing cgroup subsys freezer [ 0.008538] Initializing cgroup subsys blkio [ 0.008541] Initializing cgroup subsys perf_event [ 0.008545] Initializing cgroup subsys hugetlb [ 0.008582] mce: CPU supports 5 MCE banks [ 0.008595] LVT offset 0 assigned for vector 0xf9 [ 0.008600] process: using AMD E400 aware idle routine [ 0.008611] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.008611] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.008611] tlb_flushall_shift: 4 [ 0.022984] ACPI: Core revision 20131115 [ 0.030992] ACPI: All ACPI Tables successfully acquired [ 0.032043] ftrace: allocating 27783 entries in 55 pages [ 0.048044] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.048476] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.088167] smpboot: CPU0: Mobile AMD Sempron(tm) Processor 3500+ (fam: 0f, model: 4c, stepping: 02) [ 0.092000] Performance Events: AMD PMU driver. [ 0.092000] ... version: 0 [ 0.092000] ... bit width: 48 [ 0.092000] ... generic registers: 4 [ 0.092000] ... value mask: 0000ffffffffffff [ 0.092000] ... max period: 00007fffffffffff [ 0.092000] ... fixed-purpose events: 0 [ 0.092000] ... event mask: 000000000000000f [ 0.092000] x86: Booted up 1 node, 1 CPUs [ 0.092000] smpboot: Total of 1 processors activated (3591.08 BogoMIPS) [ 0.092000] devtmpfs: initialized [ 0.092000] EVM: security.selinux [ 0.092000] EVM: security.SMACK64 [ 0.092000] EVM: security.ima [ 0.092000] EVM: security.capability [ 0.092000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.092000] PM: Registering ACPI NVS region [mem 0x77fe5600-0x77ff7fff] (76288 bytes) [ 0.092000] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. [ 0.092908] pinctrl core: initialized pinctrl subsystem [ 0.093012] regulator-dummy: no parameters [ 0.093057] RTC time: 10:13:56, date: 10/24/14 [ 0.093113] NET: Registered protocol family 16 [ 0.093338] EISA bus registered [ 0.093341] cpuidle: using governor ladder [ 0.093343] cpuidle: using governor menu [ 0.093350] node 0 link 0: io port [1000, fffff] [ 0.093354] TOM: 0000000080000000 aka 2048M [ 0.093358] node 0 link 0: mmio [f0000000, ffffffff] [ 0.093362] node 0 link 0: mmio [e0000000, efffffff] [ 0.093365] node 0 link 0: mmio [c8000000, dfffffff] [ 0.093368] node 0 link 0: mmio [c0000000, c7ffffff] [ 0.093371] node 0 link 0: mmio [a0000, bffff] [ 0.093374] node 0 link 0: mmio [80000000, bfffffff] [ 0.093378] bus: [bus 00-ff] on node 0 link 0 [ 0.093380] bus: 00 [io 0x0000-0xffff] [ 0.093383] bus: 00 [mem 0x80000000-0xfcffffffff] [ 0.093385] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.093487] ACPI: bus type PCI registered [ 0.093490] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.093583] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.093587] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.093589] PCI: Using MMCONFIG for extended config space [ 0.093591] PCI: Using configuration type 1 for base access [ 0.095266] bio: create slab <bio-0> at 0 [ 0.095470] ACPI: Added _OSI(Module Device) [ 0.095472] ACPI: Added _OSI(Processor Device) [ 0.095474] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.095477] ACPI: Added _OSI(Processor Aggregator Device) [ 0.112089] ACPI: Interpreter enabled [ 0.112105] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.112110] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.112128] ACPI: (supports S0 S3 S4 S5) [ 0.112130] ACPI: Using IOAPIC for interrupt routing [ 0.112240] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.112502] ACPI: No dock devices found. [ 0.112968] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.112992] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.116171] ACPI: Power Resource [C22D] (off) [ 0.117137] ACPI: Power Resource [C204] (off) [ 0.118023] ACPI: Power Resource [C221] (on) [ 0.124212] ACPI: Power Resource [C360] (off) [ 0.124266] ACPI: Power Resource [C361] (off) [ 0.124319] ACPI: Power Resource [C362] (off) [ 0.124374] ACPI: Power Resource [C363] (off) [ 0.128642] ACPI: PCI Root Bridge [C079] (domain 0000 [bus 00-ff]) [ 0.128650] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.128658] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.135906] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.135910] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.135913] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.135917] acpi PNP0A03:00: host bridge window [mem 0x80000000-0xfedfffff] (ignored) [ 0.135920] acpi PNP0A03:00: host bridge window [mem 0xfee01000-0xffffffff] (ignored) [ 0.135923] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.135927] PCI: root bus 00: hardware-probed resources [ 0.136142] PCI host bridge to bus 0000:00 [ 0.136146] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.136150] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.136153] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfcffffffff] [ 0.136156] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.136168] pci 0000:00:00.0: [1002:5950] type 00 class 0x060000 [ 0.136273] pci 0000:00:01.0: [1002:5a3f] type 01 class 0x060400 [ 0.136388] pci 0000:00:04.0: [1002:5a36] type 01 class 0x060400 [ 0.136428] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.136482] pci 0000:00:04.0: System wakeup disabled by ACPI [ 0.136526] pci 0000:00:05.0: [1002:5a37] type 01 class 0x060400 [ 0.136564] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.136657] pci 0000:00:06.0: [1002:5a38] type 01 class 0x060400 [ 0.136697] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.136749] pci 0000:00:06.0: System wakeup disabled by ACPI [ 0.136820] pci 0000:00:12.0: [1002:4379] type 00 class 0x01018f [ 0.136849] pci 0000:00:12.0: reg 0x10: [io 0x9000-0x9007] [ 0.136864] pci 0000:00:12.0: reg 0x14: [io 0x9008-0x900b] [ 0.136878] pci 0000:00:12.0: reg 0x18: [io 0x9010-0x9017] [ 0.136892] pci 0000:00:12.0: reg 0x1c: [io 0x7018-0x701b] [ 0.136907] pci 0000:00:12.0: reg 0x20: [io 0x7020-0x702f] [ 0.136922] pci 0000:00:12.0: reg 0x24: [mem 0xd4409000-0xd44091ff] [ 0.136936] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.136992] pci 0000:00:12.0: supports D1 D2 [ 0.137087] pci 0000:00:13.0: [1002:4374] type 00 class 0x0c0310 [ 0.137107] pci 0000:00:13.0: reg 0x10: [mem 0xd4401000-0xd4401fff] [ 0.137238] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.137288] pci 0000:00:13.1: [1002:4375] type 00 class 0x0c0310 [ 0.137308] pci 0000:00:13.1: reg 0x10: [mem 0xd4402000-0xd4402fff] [ 0.137436] pci 0000:00:13.1: System wakeup disabled by ACPI [ 0.137487] pci 0000:00:13.2: [1002:4373] type 00 class 0x0c0320 [ 0.137513] pci 0000:00:13.2: reg 0x10: [mem 0xd4403000-0xd4403fff] [ 0.137620] pci 0000:00:13.2: supports D1 D2 [ 0.137623] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.137679] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.137741] pci 0000:00:14.0: [1002:4372] type 00 class 0x0c0500 [ 0.137764] pci 0000:00:14.0: reg 0x10: [io 0x8200-0x820f] [ 0.137778] pci 0000:00:14.0: reg 0x14: [mem 0xd4404000-0xd44043ff] [ 0.137840] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.137966] pci 0000:00:14.1: [1002:4376] type 00 class 0x010182 [ 0.137991] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 0.138005] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 0.138019] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 0.138033] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 0.138047] pci 0000:00:14.1: reg 0x20: [io 0x7040-0x704f] [ 0.138210] pci 0000:00:14.2: [1002:437b] type 00 class 0x040300 [ 0.138246] pci 0000:00:14.2: reg 0x10: [mem 0xd4408000-0xd440bfff 64bit] [ 0.138358] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.138417] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.138469] pci 0000:00:14.3: [1002:4377] type 00 class 0x060100 [ 0.138650] pci 0000:00:14.4: [1002:4371] type 01 class 0x060401 [ 0.138748] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.138803] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 [ 0.138895] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 [ 0.138984] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 [ 0.139070] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 [ 0.139221] pci 0000:01:05.0: [1002:5975] type 00 class 0x030000 [ 0.139231] pci 0000:01:05.0: reg 0x10: [mem 0xc0000000-0xc7ffffff pref] [ 0.139237] pci 0000:01:05.0: reg 0x14: [io 0x6000-0x60ff] [ 0.139244] pci 0000:01:05.0: reg 0x18: [mem 0xd4300000-0xd430ffff] [ 0.139260] pci 0000:01:05.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.139273] pci 0000:01:05.0: supports D1 D2 [ 0.139327] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.139332] pci 0000:00:01.0: bridge window [io 0x6000-0x6fff] [ 0.139337] pci 0000:00:01.0: bridge window [mem 0xd4300000-0xd43fffff] [ 0.139342] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] [ 0.139440] acpiphp: Slot [1] registered [ 0.139484] pci 0000:00:04.0: PCI bridge to [bus 10] [ 0.139489] pci 0000:00:04.0: bridge window [io 0x4000-0x5fff] [ 0.139493] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd3ffffff] [ 0.139585] acpiphp: Slot [1-1] registered [ 0.139628] pci 0000:00:05.0: PCI bridge to [bus 20] [ 0.139633] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] [ 0.139637] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] [ 0.139713] pci 0000:30:00.0: [14e4:4312] type 00 class 0x028000 [ 0.139732] pci 0000:30:00.0: reg 0x10: [mem 0xc8000000-0xc8003fff] [ 0.139847] pci 0000:30:00.0: supports D1 D2 [ 0.139874] pci 0000:30:00.0: System wakeup disabled by ACPI [ 0.139914] pci 0000:30:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.139925] pci 0000:00:06.0: PCI bridge to [bus 30] [ 0.139930] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] [ 0.140030] acpiphp: Slot [1-2] registered [ 0.140067] pci 0000:02:01.0: [14e4:169c] type 00 class 0x020000 [ 0.140107] pci 0000:02:01.0: reg 0x10: [mem 0xd4000000-0xd400ffff] [ 0.140281] pci 0000:02:01.0: PME# supported from D3hot D3cold [ 0.140315] pci 0000:02:01.0: System wakeup disabled by ACPI [ 0.140376] pci 0000:02:04.0: [104c:8039] type 02 class 0x060700 [ 0.140407] pci 0000:02:04.0: reg 0x10: [mem 0xd4010000-0xd4010fff] [ 0.140457] pci 0000:02:04.0: supports D1 D2 [ 0.140460] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot [ 0.140551] pci 0000:02:04.1: [104c:803a] type 00 class 0x0c0010 [ 0.140582] pci 0000:02:04.1: reg 0x10: [mem 0xd4011000-0xd40117ff] [ 0.140600] pci 0000:02:04.1: reg 0x14: [mem 0xd4014000-0xd4017fff] [ 0.140721] pci 0000:02:04.1: supports D1 D2 [ 0.140724] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot [ 0.140803] pci 0000:02:04.2: [104c:803b] type 00 class 0x018000 [ 0.140833] pci 0000:02:04.2: reg 0x10: [mem 0xd4018000-0xd4018fff] [ 0.140965] pci 0000:02:04.2: supports D1 D2 [ 0.140968] pci 0000:02:04.2: PME# supported from D0 D1 D2 D3hot [ 0.141044] pci 0000:02:04.3: [104c:803c] type 00 class 0x080500 [ 0.141075] pci 0000:02:04.3: reg 0x10: [mem 0xd4019000-0xd40190ff] [ 0.141207] pci 0000:02:04.3: supports D1 D2 [ 0.141210] pci 0000:02:04.3: PME# supported from D0 D1 D2 D3hot [ 0.141335] pci 0000:00:14.4: PCI bridge to [bus 02-03] (subtractive decode) [ 0.141348] pci 0000:00:14.4: bridge window [mem 0xd4000000-0xd42fffff] [ 0.141355] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.141358] pci 0000:00:14.4: bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode) [ 0.141361] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.141428] pci_bus 0000:03: busn_res: can not insert [bus 03-ff] under [bus 02-03] (conflicts with (null) [bus 02-03]) [ 0.141434] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 06 [ 0.141438] pci_bus 0000:03: busn_res: can not insert [bus 03-06] under [bus 02-03] (conflicts with (null) [bus 02-03]) [ 0.141446] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03] [ 0.141470] pci_bus 0000:00: on NUMA node 0 [ 0.142135] ACPI: PCI Interrupt Link [C12B] (IRQs 10 11) *0, disabled. [ 0.142233] ACPI: PCI Interrupt Link [C12C] (IRQs 10 11) *0, disabled. [ 0.142329] ACPI: PCI Interrupt Link [C12D] (IRQs 10 11) *0, disabled. [ 0.142425] ACPI: PCI Interrupt Link [C12E] (IRQs 10 11) *0, disabled. [ 0.142521] ACPI: PCI Interrupt Link [C12F] (IRQs 10 11) *0, disabled. [ 0.142617] ACPI: PCI Interrupt Link [C130] (IRQs 9) *0, disabled. [ 0.142712] ACPI: PCI Interrupt Link [C131] (IRQs 10 11) *0, disabled. [ 0.142816] ACPI: PCI Interrupt Link [C132] (IRQs 10 11) *5 [ 0.143371] ACPI: Enabled 11 GPEs in block 00 to 1F [ 0.143382] ACPI: \_SB_.C079: notify handler is installed [ 0.143462] Found 1 acpi root devices [ 0.143515] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.143698] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.143701] vgaarb: loaded [ 0.143703] vgaarb: bridge control possible 0000:01:05.0 [ 0.144054] SCSI subsystem initialized [ 0.144130] libata version 3.00 loaded. [ 0.144175] ACPI: bus type USB registered [ 0.144206] usbcore: registered new interface driver usbfs [ 0.144222] usbcore: registered new interface driver hub [ 0.144252] usbcore: registered new device driver usb [ 0.144405] PCI: Using ACPI for IRQ routing [ 0.156265] PCI: pci_cache_line_size set to 64 bytes [ 0.156302] pci 0000:00:14.2: address space collision: [mem 0xd4408000-0xd440bfff 64bit] conflicts with 0000:00:12.0 [mem 0xd4409000-0xd44091ff] [ 0.156361] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.156364] e820: reserve RAM buffer [mem 0x77fd0000-0x77ffffff] [ 0.156501] NetLabel: Initializing [ 0.156503] NetLabel: domain hash size = 128 [ 0.156505] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.156525] NetLabel: unlabeled traffic allowed by default [ 0.156710] Switched to clocksource refined-jiffies [ 0.164756] AppArmor: AppArmor Filesystem Enabled [ 0.164804] pnp: PnP ACPI init [ 0.164825] ACPI: bus type PNP registered [ 0.165039] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.165045] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.165049] system 00:00: [mem 0x00100000-0x77ffffff] could not be reserved [ 0.165055] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.165365] pnp 00:01: Plug and Play ACPI device, IDs PNP0401 (disabled) [ 0.165481] pnp 00:02: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.165530] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.165546] pnp 00:04: [dma 4] [ 0.165577] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.165609] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.165649] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.165715] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.165755] pnp 00:08: Plug and Play ACPI device, IDs SYN0118 SYN0100 SYN0002 PNP0f13 (active) [ 0.165947] system 00:09: [io 0x040b] has been reserved [ 0.165951] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.165955] system 00:09: [io 0x04d6] has been reserved [ 0.165961] system 00:09: [io 0x0500-0x051f] has been reserved [ 0.165965] system 00:09: [io 0x0c00-0x0c01] has been reserved [ 0.165969] system 00:09: [io 0x0c14] has been reserved [ 0.165972] system 00:09: [io 0x0c50-0x0c51] has been reserved [ 0.165976] system 00:09: [io 0x0c52] has been reserved [ 0.165979] system 00:09: [io 0x0c6c] has been reserved [ 0.165983] system 00:09: [io 0x0c6f] has been reserved [ 0.165987] system 00:09: [io 0x0cd4-0x0cdf] has been reserved [ 0.165991] system 00:09: [mem 0xffb00000-0xffbfffff] could not be reserved [ 0.165995] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved [ 0.165999] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.166409] system 00:0a: [io 0x8000-0x802f] could not be reserved [ 0.166414] system 00:0a: [io 0x8100-0x811f] has been reserved [ 0.166418] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.166422] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.166426] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.166729] system 00:0b: [mem 0x78000000-0x7fffffff] has been reserved [ 0.166733] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.166738] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.166752] pnp: PnP ACPI: found 12 devices [ 0.166754] ACPI: bus type PNP unregistered [ 0.166757] PnPBIOS: Disabled by ACPI PNP [ 0.203284] Switched to clocksource acpi_pm [ 0.203324] pci 0000:02:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.203328] pci 0000:02:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.203333] pci 0000:00:14.4: bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000 [ 0.203338] pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.203343] pci 0000:00:14.4: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 02-03] add_size 4000000 [ 0.203351] pci 0000:00:14.4: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.203355] pci 0000:00:14.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.203362] pci 0000:00:14.4: BAR 15: assigned [mem 0x80000000-0x83ffffff pref] [ 0.203367] pci 0000:00:12.0: BAR 6: assigned [mem 0x84000000-0x8407ffff pref] [ 0.203372] pci 0000:00:14.2: BAR 0: assigned [mem 0x84080000-0x84083fff 64bit] [ 0.203392] pci 0000:00:14.4: BAR 13: assigned [io 0x1000-0x1fff] [ 0.203398] pci 0000:01:05.0: BAR 6: assigned [mem 0xd4320000-0xd433ffff pref] [ 0.203401] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.203405] pci 0000:00:01.0: bridge window [io 0x6000-0x6fff] [ 0.203410] pci 0000:00:01.0: bridge window [mem 0xd4300000-0xd43fffff] [ 0.203414] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] [ 0.203419] pci 0000:00:04.0: PCI bridge to [bus 10] [ 0.203422] pci 0000:00:04.0: bridge window [io 0x4000-0x5fff] [ 0.203426] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd3ffffff] [ 0.203432] pci 0000:00:05.0: PCI bridge to [bus 20] [ 0.203436] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] [ 0.203440] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] [ 0.203445] pci 0000:00:06.0: PCI bridge to [bus 30] [ 0.203450] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] [ 0.203458] pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.203462] pci 0000:02:04.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 [ 0.203465] pci 0000:02:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.203469] pci 0000:02:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.203473] pci 0000:02:04.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref] [ 0.203477] pci 0000:02:04.0: BAR 16: assigned [mem 0x88000000-0x8bffffff] [ 0.203481] pci 0000:02:04.0: BAR 13: assigned [io 0x1000-0x10ff] [ 0.203484] pci 0000:02:04.0: BAR 14: assigned [io 0x1400-0x14ff] [ 0.203488] pci 0000:02:04.0: CardBus bridge to [bus 03-06] [ 0.203492] pci 0000:02:04.0: bridge window [io 0x1000-0x10ff] [ 0.203501] pci 0000:02:04.0: bridge window [io 0x1400-0x14ff] [ 0.203508] pci 0000:02:04.0: bridge window [mem 0x80000000-0x83ffffff pref] [ 0.203515] pci 0000:02:04.0: bridge window [mem 0x88000000-0x8bffffff] [ 0.203522] pci 0000:00:14.4: PCI bridge to [bus 02-03] [ 0.203527] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] [ 0.203535] pci 0000:00:14.4: bridge window [mem 0xd4000000-0xd42fffff] [ 0.203542] pci 0000:00:14.4: bridge window [mem 0x80000000-0x83ffffff pref] [ 0.203551] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.203555] pci_bus 0000:00: resource 5 [mem 0x80000000-0xfcffffffff] [ 0.203558] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.203562] pci_bus 0000:01: resource 0 [io 0x6000-0x6fff] [ 0.203565] pci_bus 0000:01: resource 1 [mem 0xd4300000-0xd43fffff] [ 0.203568] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc7ffffff 64bit pref] [ 0.203572] pci_bus 0000:10: resource 0 [io 0x4000-0x5fff] [ 0.203575] pci_bus 0000:10: resource 1 [mem 0xd0000000-0xd3ffffff] [ 0.203579] pci_bus 0000:20: resource 0 [io 0x2000-0x3fff] [ 0.203582] pci_bus 0000:20: resource 1 [mem 0xcc000000-0xcfffffff] [ 0.203585] pci_bus 0000:30: resource 1 [mem 0xc8000000-0xc80fffff] [ 0.203589] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.203592] pci_bus 0000:02: resource 1 [mem 0xd4000000-0xd42fffff] [ 0.203595] pci_bus 0000:02: resource 2 [mem 0x80000000-0x83ffffff pref] [ 0.203598] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] [ 0.203602] pci_bus 0000:02: resource 5 [mem 0x80000000-0xfcffffffff] [ 0.203605] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.203608] pci_bus 0000:03: resource 0 [io 0x1000-0x10ff] [ 0.203612] pci_bus 0000:03: resource 1 [io 0x1400-0x14ff] [ 0.203615] pci_bus 0000:03: resource 2 [mem 0x80000000-0x83ffffff pref] [ 0.203618] pci_bus 0000:03: resource 3 [mem 0x88000000-0x8bffffff] [ 0.203666] NET: Registered protocol family 2 [ 0.203892] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.203923] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.203971] TCP: Hash tables configured (established 8192 bind 8192) [ 0.203971] TCP: reno registered [ 0.203971] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.203971] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.203971] NET: Registered protocol family 1 [ 0.203971] pci 0000:00:00.0: MSI quirk detected; MSI disabled [ 0.203971] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.203971] pci 0000:01:05.0: Boot video device [ 0.203971] PCI: CLS 64 bytes, default 64 [ 0.203971] Trying to unpack rootfs image as initramfs... [ 6.101987] Freeing initrd memory: 19560K (f68e4000 - f7bfe000) [ 6.102196] microcode: AMD CPU family 0xf not supported [ 6.102199] Scanning for low memory corruption every 60 seconds [ 6.102484] Initialise system trusted keyring [ 6.102550] audit: initializing netlink socket (disabled) [ 6.102567] type=2000 audit(1414145642.099:1): initialized [ 6.134337] bounce pool size: 64 pages [ 6.134350] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 6.136106] zbud: loaded [ 6.136196] VFS: Disk quotas dquot_6.5.2 [ 6.136257] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 6.136908] fuse init (API version 7.22) [ 6.137003] msgmni has been set to 1720 [ 6.137086] Key type big_key registered [ 6.137409] Key type asymmetric registered [ 6.137411] Asymmetric key parser 'x509' registered [ 6.137457] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 6.137494] io scheduler noop registered [ 6.137497] io scheduler deadline registered (default) [ 6.137533] io scheduler cfq registered [ 6.137779] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 6.137803] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 6.137878] ipmi message handler version 39.2 [ 6.142243] ACPI: AC Adapter [C1C3] (on-line) [ 6.142326] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 6.142333] ACPI: Sleep Button [C266] [ 6.142382] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 6.142421] ACPI: Lid Switch [C267] [ 6.142472] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 6.142476] ACPI: Power Button [PWRF] [ 6.142563] ACPI: Fan [C364] (off) [ 6.142611] ACPI: Fan [C365] (off) [ 6.142660] ACPI: Fan [C366] (off) [ 6.142709] ACPI: Fan [C367] (off) [ 6.150811] thermal LNXTHERM:00: registered as thermal_zone0 [ 6.150814] ACPI: Thermal Zone [TZ1] (52 C) [ 6.154545] thermal LNXTHERM:01: registered as thermal_zone1 [ 6.154547] ACPI: Thermal Zone [TZ2] (39 C) [ 6.169309] thermal LNXTHERM:02: registered as thermal_zone2 [ 6.169311] ACPI: Thermal Zone [TZ3] (26 C) [ 6.169387] GHES: HEST is not enabled! [ 6.169520] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 6.171201] Linux agpgart interface v0.103 [ 6.171585] tpm_tis 00:02: 1.2 TPM (device-id 0xB, rev-id 16) [ 6.172043] isapnp: Scanning for PnP cards... [ 6.528753] isapnp: No Plug & Play device found [ 6.565336] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 6.565344] ACPI: Battery Slot [C1C5] (battery present) [ 6.565430] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 6.565437] ACPI: Battery Slot [C1C4] (battery absent) [ 6.588122] tpm_tis 00:02: Adjusting TPM timeout parameters. [ 7.572069] tpm_tis 00:02: TPM is disabled/deactivated (0x7) [ 7.573759] brd: module loaded [ 7.574662] loop: module loaded [ 7.575358] libphy: Fixed MDIO Bus: probed [ 7.575521] tun: Universal TUN/TAP device driver, 1.6 [ 7.575524] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 7.575570] PPP generic driver version 2.4.2 [ 7.575624] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.575630] ehci-pci: EHCI PCI platform driver [ 7.575859] ehci-pci 0000:00:13.2: EHCI Host Controller [ 7.575867] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 1 [ 7.575952] ehci-pci 0000:00:13.2: irq 19, io mem 0xd4403000 [ 7.584057] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 7.584159] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.584163] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.584166] usb usb1: Product: EHCI Host Controller [ 7.584169] usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd [ 7.584172] usb usb1: SerialNumber: 0000:00:13.2 [ 7.584313] hub 1-0:1.0: USB hub found [ 7.584323] hub 1-0:1.0: 8 ports detected [ 7.584733] ehci-platform: EHCI generic platform driver [ 7.584747] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.584749] ohci-pci: OHCI PCI platform driver [ 7.584908] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 7.584915] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 7.584936] ohci-pci 0000:00:13.0: irq 19, io mem 0xd4401000 [ 7.644055] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.644059] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.644062] usb usb2: Product: OHCI PCI host controller [ 7.644065] usb usb2: Manufacturer: Linux 3.13.0-32-generic ohci_hcd [ 7.644068] usb usb2: SerialNumber: 0000:00:13.0 [ 7.644187] hub 2-0:1.0: USB hub found [ 7.644202] hub 2-0:1.0: 4 ports detected [ 7.644538] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 7.644545] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 7.644564] ohci-pci 0000:00:13.1: irq 19, io mem 0xd4402000 [ 7.704045] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.704048] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.704051] usb usb3: Product: OHCI PCI host controller [ 7.704054] usb usb3: Manufacturer: Linux 3.13.0-32-generic ohci_hcd [ 7.704057] usb usb3: SerialNumber: 0000:00:13.1 [ 7.704171] hub 3-0:1.0: USB hub found [ 7.704188] hub 3-0:1.0: 4 ports detected [ 7.704378] ohci-platform: OHCI generic platform driver [ 7.704394] uhci_hcd: USB Universal Host Controller Interface driver [ 7.704503] i8042: PNP: PS/2 Controller [PNP0303:C21E,PNP0f13:C21F] at 0x60,0x64 irq 1,12 [ 7.706170] i8042: Detected active multiplexing controller, rev 1.1 [ 7.706865] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 7.706872] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 7.706902] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 7.706938] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 7.706964] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 7.707103] mousedev: PS/2 mouse device common for all mice [ 7.707289] rtc_cmos 00:06: RTC can wake from S4 [ 7.707447] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 7.707482] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram [ 7.707580] device-mapper: uevent: version 1.0.3 [ 7.707654] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 7.707678] platform eisa.0: Probing EISA bus 0 [ 7.707682] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 7.707686] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 7.707689] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 7.707693] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 7.707696] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 7.707700] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 7.707704] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 7.707707] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 7.707711] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 7.707714] platform eisa.0: EISA: Detected 0 cards [ 7.707723] cpufreq-nforce2: No nForce2 chipset. [ 7.707728] ledtrig-cpu: registered to indicate activity on CPUs [ 7.707924] TCP: cubic registered [ 7.708094] NET: Registered protocol family 10 [ 7.708345] NET: Registered protocol family 17 [ 7.708364] Key type dns_resolver registered [ 7.708555] Using IPI No-Shortcut mode [ 7.708658] Loading compiled-in X.509 certificates [ 7.713436] Loaded X.509 cert 'Magrathea: Glacier signing key: a7fc6590fc4a8d859aaebda2ca5dd04716244fa0' [ 7.713454] registered taskstats version 1 [ 7.716742] Key type trusted registered [ 7.719586] Key type encrypted registered [ 7.722491] AppArmor: AppArmor sha1 policy hashing enabled [ 7.732041] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 7.768072] tpm_tis 00:02: A TPM error (7) occurred attempting to read a pcr value [ 7.768075] IMA: No TPM chip found, activating TPM-bypass! [ 7.768430] regulator-dummy: disabling [ 7.768466] Magic number: 2:57:225 [ 7.768475] port2: hash matches [ 7.768478] port2: hash matches [ 7.768482] port2: hash matches [ 7.768614] rtc_cmos 00:06: setting system clock to 2014-10-24 10:14:03 UTC (1414145643) [ 7.768747] powernow-k8: fid 0xa (1800 MHz), vid 0x10 [ 7.768749] powernow-k8: fid 0x8 (1600 MHz), vid 0x12 [ 7.768751] powernow-k8: fid 0x0 (800 MHz), vid 0x18 [ 7.768780] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3500+ (1 cpu cores) (version 2.20.00) [ 7.768788] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 7.768790] EDD information not available. [ 7.768837] PM: Hibernation image not present or could not be loaded. [ 7.769489] Freeing unused kernel memory: 872K (c19b4000 - c1a8e000) [ 7.769538] Write protecting the kernel text: 6532k [ 7.769619] Write protecting the kernel read-only data: 2764k [ 7.769621] NX-protecting the kernel data: 5756k [ 7.792297] systemd-udevd[92]: starting version 204 [ 7.854832] wmi: Mapper loaded [ 7.855898] [Firmware Bug]: _BCQ is used instead of _BQC [ 7.855912] ACPI: Video Device [C07B] (multi-head: yes rom: no post: no) [ 7.855929] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 7.863347] acpi device:03: registered as cooling_device5 [ 7.863464] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input8 [ 7.906205] sata_sil 0000:00:12.0: version 2.4 [ 7.906213] sata_sil 0000:00:12.0: quirky BIOS, skipping spindown on poweroff and hibernation [ 7.910797] scsi0 : sata_sil [ 7.917320] scsi1 : sata_sil [ 7.917406] ata1: SATA max UDMA/100 mmio m512@0xd4409000 tf 0xd4409080 irq 16 [ 7.917411] ata2: SATA max UDMA/100 mmio m512@0xd4409000 tf 0xd44090c0 irq 16 [ 7.928520] scsi2 : pata_atiixp [ 7.934592] scsi3 : pata_atiixp [ 7.934661] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x7040 irq 14 [ 7.934664] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x7048 irq 15 [ 7.973139] pps_core: LinuxPPS API ver. 1 registered [ 7.973144] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 7.982806] [drm] Initialized drm 1.1.0 20060810 [ 8.000946] PTP clock support registered [ 8.009709] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00 [ 8.009720] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243) [ 8.009728] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243) [ 8.009735] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243) [ 8.009743] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243) [ 8.010001] sdhci: Secure Digital Host Controller Interface driver [ 8.010003] sdhci: Copyright(c) Pierre Ossman [ 8.034779] sdhci-pci 0000:02:04.3: SDHCI controller found [104c:803c] (rev 0) [ 8.034941] sdhci-pci 0000:02:04.3: dummy supplies not allowed [ 8.034944] mmc0: no vqmmc regulator found [ 8.034947] sdhci-pci 0000:02:04.3: dummy supplies not allowed [ 8.034948] mmc0: no vmmc regulator found [ 8.035116] mmc0: SDHCI controller on PCI [0000:02:04.3] using PIO [ 8.049506] tg3.c:v3.134 (Sep 16, 2013) [ 8.175121] ata3.00: ATAPI: PIONEER DVDRW DVR-K17, 1.05, max MWDMA2 [ 8.175392] ssb: Sonics Silicon Backplane found on PCI device 0000:30:00.0 [ 8.179764] tg3 0000:02:01.0 eth0: Tigon3 [partno(BCM95788A50) rev 3003] (PCI:33MHz:32-bit) MAC address 00:17:08:42:f7:27 [ 8.179772] tg3 0000:02:01.0 eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0], EEE[0]) [ 8.179775] tg3 0000:02:01.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 8.179779] tg3 0000:02:01.0 eth0: dma_rwctrl[763f0000] dma_mask[32-bit] [ 8.240168] firewire_ohci 0000:02:04.1: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 8.255879] ata3.00: configured for MWDMA2 [ 8.266864] [drm] radeon kernel modesetting enabled. [ 8.275282] [drm] initializing kernel modesetting (RS480 0x1002:0x5975 0x103C:0x30B0). [ 8.275310] [drm] register mmio base: 0xD4300000 [ 8.275312] [drm] register mmio size: 65536 [ 8.275443] [drm] Generation 2 PCI interface, using max accessible memory [ 8.275451] radeon 0000:01:05.0: VRAM: 128M 0x0000000078000000 - 0x000000007FFFFFFF (128M used) [ 8.275455] radeon 0000:01:05.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF [ 8.275464] [drm] Detected VRAM RAM=128M, BAR=128M [ 8.275466] [drm] RAM width 128bits DDR [ 8.278114] [TTM] Zone kernel: Available graphics memory: 440904 kiB [ 8.278119] [TTM] Zone highmem: Available graphics memory: 967148 kiB [ 8.278121] [TTM] Initializing pool allocator [ 8.278127] [TTM] Initializing DMA pool allocator [ 8.278155] [drm] radeon: 128M of VRAM memory ready [ 8.278158] [drm] radeon: 512M of GTT memory ready. [ 8.278186] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 8.286313] [drm] radeon: 2 quad pipes, 1 z pipes initialized. [ 8.292218] [drm] PCIE GART of 512M enabled (table at 0x0000000000100000). [ 8.292279] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8.302303] ata1.00: ATA-9: SanDisk SDSSDRC032G, 2.0.0, max UDMA/133 [ 8.302310] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 8.302518] ata1.00: NODEV after polling detection [ 8.302521] ata1.00: revalidation failed (errno=-2) [ 8.304133] radeon 0000:01:05.0: WB enabled [ 8.304143] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000080000000 and cpu addr 0xf75b7000 [ 8.304147] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 8.304149] [drm] Driver supports precise vblank timestamp query. [ 8.304182] [drm] radeon: irq initialized. [ 8.304195] [drm] Loading R300 Microcode [ 8.304399] [drm] radeon: ring at 0x0000000080001000 [ 8.304420] [drm] ring test succeeded in 1 usecs [ 8.304579] [drm] ib test succeeded in 0 usecs [ 8.304843] [drm] Panel ID String: LPL [ 8.304846] [drm] Panel Size 1024x768 [ 8.328807] [drm] radeon legacy LVDS backlight initialized [ 8.328810] [drm] Radeon Display Connectors [ 8.328812] [drm] Connector 0: [ 8.328814] [drm] VGA-1 [ 8.328817] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68 [ 8.328819] [drm] Encoders: [ 8.328820] [drm] CRT1: INTERNAL_DAC2 [ 8.328822] [drm] Connector 1: [ 8.328824] [drm] LVDS-1 [ 8.328827] [drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4 [ 8.328829] [drm] Encoders: [ 8.328830] [drm] LCD1: INTERNAL_LVDS [ 8.328832] [drm] Connector 2: [ 8.328834] [drm] SVIDEO-1 [ 8.328835] [drm] Encoders: [ 8.328837] [drm] TV1: INTERNAL_DAC2 [ 8.336453] [drm] radeon: power management initialized [ 8.416265] usb 3-1: new full-speed USB device number 2 using ohci-pci [ 8.430547] [drm] fb mappable at 0xC0040000 [ 8.430552] [drm] vram apper at 0xC0000000 [ 8.430554] [drm] size 3145728 [ 8.430556] [drm] fb depth is 24 [ 8.430558] [drm] pitch is 4096 [ 8.430645] fbcon: radeondrmfb (fb0) is primary device [ 8.475627] Console: switching to colour frame buffer device 128x48 [ 8.482962] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device [ 8.482965] radeon 0000:01:05.0: registered panic notifier [ 8.483048] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:05.0 on minor 0 [ 8.625081] usb 3-1: New USB device found, idVendor=08ff, idProduct=2580 [ 8.625088] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 8.625092] usb 3-1: Product: Fingerprint Sensor [ 8.752105] firewire_core 0000:02:04.1: created device fw0: GUID 00023f9929014c0c, S400 [ 8.774668] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0, board id: 71, fw id: 240405 [ 8.774677] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0 [ 8.815549] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12 [ 13.612069] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 13.612195] ata1.00: NODEV after polling detection [ 13.612198] ata1.00: revalidation failed (errno=-2) [ 18.932065] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 18.932180] ata1.00: NODEV after polling detection [ 18.932182] ata1.00: revalidation failed (errno=-2) [ 18.932185] ata1.00: disabled [ 18.932208] ata1: hard resetting link [ 19.252063] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 19.252074] ata1: EH complete [ 19.572047] ata2: SATA link down (SStatus 0 SControl 300) [ 19.573462] scsi 2:0:0:0: CD-ROM PIONEER DVDRW DVR-K17 1.05 PQ: 0 ANSI: 5 [ 19.574604] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 19.574607] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 19.575010] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 19.575233] sr 2:0:0:0: Attached scsi generic sg0 type 5 [ 23.270122] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 23.324672] ISO 9660 Extensions: RRIP_1991A [ 23.864486] random: nonblocking pool is initialized [ 24.405275] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 91.148292] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 93.471029] systemd-udevd[978]: starting version 204 [ 102.495811] lp: driver loaded but no devices found [ 103.374727] ppdev: user-space parallel port driver [ 103.392085] parport_pc 00:01: [io 0x0378-0x037f] [ 103.392095] parport_pc 00:01: [io 0x0778-0x077a] [ 103.392165] parport_pc 00:01: [irq 5] [ 103.392170] parport_pc 00:01: [dma 1] [ 103.393356] parport_pc 00:01: activated [ 103.393361] parport_pc 00:01: reported by Plug and Play ACPI [ 103.393439] parport0: PC-style at 0x378 (0x778), irq 5, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 103.488230] lp0: using parport0 (interrupt-driven). [ 104.069922] Bluetooth: Core ver 2.17 [ 104.071491] NET: Registered protocol family 31 [ 104.071495] Bluetooth: HCI device and connection manager initialized [ 104.071506] Bluetooth: HCI socket layer initialized [ 104.071511] Bluetooth: L2CAP socket layer initialized [ 104.071518] Bluetooth: SCO socket layer initialized [ 105.369326] Bluetooth: RFCOMM TTY layer initialized [ 105.369343] Bluetooth: RFCOMM socket layer initialized [ 105.369354] Bluetooth: RFCOMM ver 1.11 [ 105.945394] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 105.945401] Bluetooth: BNEP filters: protocol multicast [ 105.945414] Bluetooth: BNEP socket layer initialized [ 106.506323] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 107.437060] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8200, revision 0 [ 108.773323] yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:30b0] [ 108.773353] yenta_cardbus 0000:02:04.0: Enabling burst memory read transactions [ 108.773360] yenta_cardbus 0000:02:04.0: Using INTVAL to route CSC interrupts to PCI [ 108.773363] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI [ 108.773371] yenta_cardbus 0000:02:04.0: TI: mfunc 0x01a11002, devctl 0x64 [ 109.004737] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0cd8, PCI irq 20 [ 109.004745] yenta_cardbus 0000:02:04.0: Socket status: 30000006 [ 109.004750] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06 [ 109.004761] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io 0x1000-0x1fff] [ 109.004765] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x1000-0x1fff: [ 109.006579] excluding 0x1000-0x10ff 0x1400-0x14ff [ 109.013283] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xd4000000-0xd42fffff] [ 109.013288] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd4000000-0xd42fffff: [ 109.013291] excluding 0xd4000000-0xd402ffff [ 109.013305] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref] [ 109.013308] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff: [ 109.013317] excluding 0x80000000-0x83ffffff [ 110.952652] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 115.303616] device-mapper: multipath: version 1.6.0 loaded [ 115.625215] cfg80211: Calling CRDA to update world regulatory domain [ 117.544427] init: failsafe main process (1170) killed by TERM signal [ 118.460034] input: HP WMI hotkeys as /devices/virtual/input/input14 [ 120.373237] hda-intel 0000:00:14.2: Using LPIB position fix [ 120.376756] hda-intel 0000:00:14.2: Enable sync_write for stable communication [ 120.957467] autoconfig: line_outs=1 (0x5/0x0/0x0/0x0/0x0) type:speaker [ 120.957482] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 120.957484] hp_outs=1 (0x6/0x0/0x0/0x0/0x0) [ 120.957486] mono: mono_out=0x0 [ 120.957488] inputs: [ 120.957490] Mic=0x8 [ 120.957493] Internal Mic=0x18 [ 120.957494] Line=0x9 [ 120.964650] cfg80211: World regulatory domain updated: [ 120.964656] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 120.964659] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 120.964662] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 120.964665] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 120.964667] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 120.964670] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 120.971057] autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line [ 120.971071] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 120.971074] hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 120.971076] mono: mono_out=0x0 [ 120.971077] inputs: [ 120.974698] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 120.974956] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input16 [ 120.975174] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input15 [ 128.478593] b43-phy0: Broadcom 4311 WLAN found (core revision 10) [ 128.520032] b43-phy0: Found PHY: Analog 4, Type 2 (G), Revision 8 [ 128.544138] Broadcom 43xx driver loaded [ Features: PNL ] [ 128.546387] b43 ssb0:0: Direct firmware load failed with error -2 [ 128.546394] b43 ssb0:0: Falling back to user helper [ 128.549262] b43 ssb0:0: Direct firmware load failed with error -2 [ 128.549268] b43 ssb0:0: Falling back to user helper [ 128.554380] b43 ssb0:0: Direct firmware load failed with error -2 [ 128.554386] b43 ssb0:0: Falling back to user helper [ 128.555100] b43 ssb0:0: Direct firmware load failed with error -2 [ 128.555104] b43 ssb0:0: Falling back to user helper [ 128.560957] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found [ 128.560963] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found [ 128.560967] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 130.323512] init: alsa-restore main process (1431) terminated with status 99 [ 131.473464] zram: module is from the staging directory, the quality is unknown, you have been warned. [ 131.484301] zram: Created 1 device(s) ... [ 133.902207] Adding 967144k swap on /dev/zram0. Priority:5 extents:1 across:967144k SSFS [ 142.743470] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 142.744194] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 145.870522] tg3 0000:02:01.0 eth0: Link is up at 1000 Mbps, full duplex [ 145.870534] tg3 0000:02:01.0 eth0: Flow control is off for TX and off for RX [ 145.870680] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 157.964390] init: plymouth-upstart-bridge main process ended, respawning [ 157.993357] init: plymouth-upstart-bridge main process ended, respawning |
Mit einer HDD klappt alles wunderbar, dmesg-hdd:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 | [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-32-generic (buildd@roseapple) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #57-Ubuntu SMP Tue Jul 15 03:51:12 UTC 2014 (Ubuntu 3.13.0-32.57-generic 3.13.11.4) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000077fcffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000077fd0000-0x0000000077fe55ff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000077fe5600-0x0000000077ff7fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000077ff8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffbc0000-0x00000000ffcbffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Hewlett-Packard HP Compaq nx6325 (EY344EA#ABD)/30B0, BIOS 68TT2 Ver. F.07 05/08/2007 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x77fd0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C0FFF write-protect [ 0.000000] C1000-C3FFF write-back [ 0.000000] C4000-C4FFF write-protect [ 0.000000] C5000-C7FFF write-back [ 0.000000] C8000-C8FFF write-protect [ 0.000000] C9000-CBFFF write-back [ 0.000000] CC000-CCFFF write-protect [ 0.000000] CD000-CFFFF write-back [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 base 0040000000 mask FFE0000000 write-back [ 0.000000] 2 base 0060000000 mask FFF0000000 write-back [ 0.000000] 3 base 0070000000 mask FFF8000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff] [ 0.000000] [mem 0x37800000-0x379fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff] [ 0.000000] [mem 0x34000000-0x377fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x33ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff] [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k [ 0.000000] BRK [0x01b8e000, 0x01b8efff] PGTABLE [ 0.000000] RAMDISK: [mem 0x76cb6000-0x77fcffff] [ 0.000000] Allocated new RAMDISK: [mem 0x368e4000-0x37bfd919] [ 0.000000] Move RAMDISK from [mem 0x76cb6000-0x77fcf919] to [mem 0x368e4000-0x37bfd919] [ 0.000000] ACPI: RSDP 000f7a90 000024 (v02 HP ) [ 0.000000] ACPI: XSDT 77fe57b8 00005C (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: FACP 77fe5684 0000F4 (v04 HP 0944 00000003 HP 00000001) [ 0.000000] ACPI: DSDT 77fe5a60 00F6D3 (v01 HP SB400 00010000 MSFT 0100000E) [ 0.000000] ACPI: FACS 77ff7e80 000040 [ 0.000000] ACPI: SLIC 77fe5814 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: APIC 77fe598c 000062 (v01 HP 0944 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 77fe59f0 00003C (v01 HP 0944 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 77fe5a2c 000032 (v02 HP 0944 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 77ff5133 000059 (v01 HP HPQNLP 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 77ff518c 0000F4 (v01 HP PSSTBLID 00000001 HP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1027MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] BRK [0x01b8f000, 0x01b8ffff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x37bfdfff] [ 0.000000] HighMem [mem 0x37bfe000-0x77fcffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x77fcffff] [ 0.000000] On node 0 totalpages: 491374 [ 0.000000] free_area_init_node: node 0, pgdat c1997200, node_mem_map f59e4020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 224254 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2056 pages used for memmap [ 0.000000] HighMem zone: 263122 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] SB4X0 revision 0x82 [ 0.000000] Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f59bc000 s36096 r0 d21248 u57344 [ 0.000000] pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 489590 [ 0.000000] Kernel command line: file=/cdrom/preseed/lubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- debian-installer/language=de keyboard-configuration/layoutcode?=de [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 3931768 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:00077fd0) [ 0.000000] Memory: 1913864K/1965496K available (6528K kernel code, 639K rwdata, 2760K rodata, 872K init, 924K bss, 51632K reserved, 1052488K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc19b4000 - 0xc1a8e000 ( 872 kB) [ 0.000000] .data : 0xc1660532 - 0xc19b3e80 (3406 kB) [ 0.000000] .text : 0xc1000000 - 0xc1660532 (6529 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f5008000 soft=f500a000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1795.610 MHz processor [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.22 BogoMIPS (lpj=7182440) [ 0.004011] pid_max: default: 32768 minimum: 301 [ 0.004070] Security Framework initialized [ 0.004093] AppArmor: AppArmor initialized [ 0.004095] Yama: becoming mindful. [ 0.004174] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004177] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004524] Initializing cgroup subsys memory [ 0.004535] Initializing cgroup subsys devices [ 0.004539] Initializing cgroup subsys freezer [ 0.004542] Initializing cgroup subsys blkio [ 0.004545] Initializing cgroup subsys perf_event [ 0.004549] Initializing cgroup subsys hugetlb [ 0.004586] mce: CPU supports 5 MCE banks [ 0.004598] LVT offset 0 assigned for vector 0xf9 [ 0.004604] process: using AMD E400 aware idle routine [ 0.004615] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.004615] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.004615] tlb_flushall_shift: 4 [ 0.020637] ACPI: Core revision 20131115 [ 0.028619] ACPI: All ACPI Tables successfully acquired [ 0.032044] ftrace: allocating 27783 entries in 55 pages [ 0.044128] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.044562] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.085967] smpboot: CPU0: Mobile AMD Sempron(tm) Processor 3500+ (fam: 0f, model: 4c, stepping: 02) [ 0.088000] Performance Events: AMD PMU driver. [ 0.088000] ... version: 0 [ 0.088000] ... bit width: 48 [ 0.088000] ... generic registers: 4 [ 0.088000] ... value mask: 0000ffffffffffff [ 0.088000] ... max period: 00007fffffffffff [ 0.088000] ... fixed-purpose events: 0 [ 0.088000] ... event mask: 000000000000000f [ 0.088000] x86: Booted up 1 node, 1 CPUs [ 0.088000] smpboot: Total of 1 processors activated (3591.22 BogoMIPS) [ 0.088000] devtmpfs: initialized [ 0.088000] EVM: security.selinux [ 0.088000] EVM: security.SMACK64 [ 0.088000] EVM: security.ima [ 0.088000] EVM: security.capability [ 0.088000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.088000] PM: Registering ACPI NVS region [mem 0x77fe5600-0x77ff7fff] (76288 bytes) [ 0.088000] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. [ 0.088906] pinctrl core: initialized pinctrl subsystem [ 0.089011] regulator-dummy: no parameters [ 0.089055] RTC time: 9:58:55, date: 10/24/14 [ 0.089112] NET: Registered protocol family 16 [ 0.089337] EISA bus registered [ 0.089339] cpuidle: using governor ladder [ 0.089342] cpuidle: using governor menu [ 0.089348] node 0 link 0: io port [1000, fffff] [ 0.089352] TOM: 0000000080000000 aka 2048M [ 0.089356] node 0 link 0: mmio [f0000000, ffffffff] [ 0.089360] node 0 link 0: mmio [e0000000, efffffff] [ 0.089363] node 0 link 0: mmio [c8000000, dfffffff] [ 0.089366] node 0 link 0: mmio [c0000000, c7ffffff] [ 0.089369] node 0 link 0: mmio [a0000, bffff] [ 0.089372] node 0 link 0: mmio [80000000, bfffffff] [ 0.089376] bus: [bus 00-ff] on node 0 link 0 [ 0.089378] bus: 00 [io 0x0000-0xffff] [ 0.089381] bus: 00 [mem 0x80000000-0xfcffffffff] [ 0.089383] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.089484] ACPI: bus type PCI registered [ 0.089487] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.089580] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.089584] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.089586] PCI: Using MMCONFIG for extended config space [ 0.089588] PCI: Using configuration type 1 for base access [ 0.091265] bio: create slab <bio-0> at 0 [ 0.091469] ACPI: Added _OSI(Module Device) [ 0.091471] ACPI: Added _OSI(Processor Device) [ 0.091473] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.091476] ACPI: Added _OSI(Processor Aggregator Device) [ 0.108090] ACPI: Interpreter enabled [ 0.108105] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.108111] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.108128] ACPI: (supports S0 S3 S4 S5) [ 0.108131] ACPI: Using IOAPIC for interrupt routing [ 0.108241] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.108502] ACPI: No dock devices found. [ 0.108968] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.108993] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.112090] ACPI: Power Resource [C22D] (off) [ 0.113059] ACPI: Power Resource [C204] (off) [ 0.113942] ACPI: Power Resource [C221] (on) [ 0.120137] ACPI: Power Resource [C360] (off) [ 0.120192] ACPI: Power Resource [C361] (off) [ 0.120244] ACPI: Power Resource [C362] (off) [ 0.120300] ACPI: Power Resource [C363] (off) [ 0.124572] ACPI: PCI Root Bridge [C079] (domain 0000 [bus 00-ff]) [ 0.124581] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.124588] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.131828] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.131832] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.131836] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.131839] acpi PNP0A03:00: host bridge window [mem 0x80000000-0xfedfffff] (ignored) [ 0.131842] acpi PNP0A03:00: host bridge window [mem 0xfee01000-0xffffffff] (ignored) [ 0.131846] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.131849] PCI: root bus 00: hardware-probed resources [ 0.132064] PCI host bridge to bus 0000:00 [ 0.132068] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.132072] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.132075] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfcffffffff] [ 0.132079] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.132090] pci 0000:00:00.0: [1002:5950] type 00 class 0x060000 [ 0.132195] pci 0000:00:01.0: [1002:5a3f] type 01 class 0x060400 [ 0.132310] pci 0000:00:04.0: [1002:5a36] type 01 class 0x060400 [ 0.132348] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.132402] pci 0000:00:04.0: System wakeup disabled by ACPI [ 0.132448] pci 0000:00:05.0: [1002:5a37] type 01 class 0x060400 [ 0.132487] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.132581] pci 0000:00:06.0: [1002:5a38] type 01 class 0x060400 [ 0.132620] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.132672] pci 0000:00:06.0: System wakeup disabled by ACPI [ 0.132744] pci 0000:00:12.0: [1002:4379] type 00 class 0x01018f [ 0.132773] pci 0000:00:12.0: reg 0x10: [io 0x9000-0x9007] [ 0.132788] pci 0000:00:12.0: reg 0x14: [io 0x9008-0x900b] [ 0.132802] pci 0000:00:12.0: reg 0x18: [io 0x9010-0x9017] [ 0.132816] pci 0000:00:12.0: reg 0x1c: [io 0x7018-0x701b] [ 0.132831] pci 0000:00:12.0: reg 0x20: [io 0x7020-0x702f] [ 0.132845] pci 0000:00:12.0: reg 0x24: [mem 0xd4409000-0xd44091ff] [ 0.132860] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.132915] pci 0000:00:12.0: supports D1 D2 [ 0.133008] pci 0000:00:13.0: [1002:4374] type 00 class 0x0c0310 [ 0.133028] pci 0000:00:13.0: reg 0x10: [mem 0xd4401000-0xd4401fff] [ 0.133160] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.133210] pci 0000:00:13.1: [1002:4375] type 00 class 0x0c0310 [ 0.133231] pci 0000:00:13.1: reg 0x10: [mem 0xd4402000-0xd4402fff] [ 0.133360] pci 0000:00:13.1: System wakeup disabled by ACPI [ 0.133411] pci 0000:00:13.2: [1002:4373] type 00 class 0x0c0320 [ 0.133436] pci 0000:00:13.2: reg 0x10: [mem 0xd4403000-0xd4403fff] [ 0.133542] pci 0000:00:13.2: supports D1 D2 [ 0.133545] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.133601] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.133664] pci 0000:00:14.0: [1002:4372] type 00 class 0x0c0500 [ 0.133687] pci 0000:00:14.0: reg 0x10: [io 0x8200-0x820f] [ 0.133702] pci 0000:00:14.0: reg 0x14: [mem 0xd4404000-0xd44043ff] [ 0.133762] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.133889] pci 0000:00:14.1: [1002:4376] type 00 class 0x010182 [ 0.133915] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 0.133930] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 0.133945] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 0.133958] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 0.133972] pci 0000:00:14.1: reg 0x20: [io 0x7040-0x704f] [ 0.134134] pci 0000:00:14.2: [1002:437b] type 00 class 0x040300 [ 0.134170] pci 0000:00:14.2: reg 0x10: [mem 0xd4408000-0xd440bfff 64bit] [ 0.134280] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.134339] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.134391] pci 0000:00:14.3: [1002:4377] type 00 class 0x060100 [ 0.134573] pci 0000:00:14.4: [1002:4371] type 01 class 0x060401 [ 0.134670] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.134726] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 [ 0.134817] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 [ 0.134906] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 [ 0.134992] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 [ 0.135143] pci 0000:01:05.0: [1002:5975] type 00 class 0x030000 [ 0.135153] pci 0000:01:05.0: reg 0x10: [mem 0xc0000000-0xc7ffffff pref] [ 0.135161] pci 0000:01:05.0: reg 0x14: [io 0x6000-0x60ff] [ 0.135167] pci 0000:01:05.0: reg 0x18: [mem 0xd4300000-0xd430ffff] [ 0.135184] pci 0000:01:05.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.135197] pci 0000:01:05.0: supports D1 D2 [ 0.135252] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.135257] pci 0000:00:01.0: bridge window [io 0x6000-0x6fff] [ 0.135262] pci 0000:00:01.0: bridge window [mem 0xd4300000-0xd43fffff] [ 0.135267] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] [ 0.135364] acpiphp: Slot [1] registered [ 0.135407] pci 0000:00:04.0: PCI bridge to [bus 10] [ 0.135412] pci 0000:00:04.0: bridge window [io 0x4000-0x5fff] [ 0.135416] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd3ffffff] [ 0.135509] acpiphp: Slot [1-1] registered [ 0.135551] pci 0000:00:05.0: PCI bridge to [bus 20] [ 0.135556] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] [ 0.135560] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] [ 0.135636] pci 0000:30:00.0: [14e4:4312] type 00 class 0x028000 [ 0.135655] pci 0000:30:00.0: reg 0x10: [mem 0xc8000000-0xc8003fff] [ 0.135767] pci 0000:30:00.0: supports D1 D2 [ 0.135795] pci 0000:30:00.0: System wakeup disabled by ACPI [ 0.135835] pci 0000:30:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.135847] pci 0000:00:06.0: PCI bridge to [bus 30] [ 0.135852] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] [ 0.135946] acpiphp: Slot [1-2] registered [ 0.135982] pci 0000:02:01.0: [14e4:169c] type 00 class 0x020000 [ 0.136028] pci 0000:02:01.0: reg 0x10: [mem 0xd4000000-0xd400ffff] [ 0.136203] pci 0000:02:01.0: PME# supported from D3hot D3cold [ 0.136238] pci 0000:02:01.0: System wakeup disabled by ACPI [ 0.136298] pci 0000:02:04.0: [104c:8039] type 02 class 0x060700 [ 0.136328] pci 0000:02:04.0: reg 0x10: [mem 0xd4010000-0xd4010fff] [ 0.136377] pci 0000:02:04.0: supports D1 D2 [ 0.136380] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot [ 0.136470] pci 0000:02:04.1: [104c:803a] type 00 class 0x0c0010 [ 0.136502] pci 0000:02:04.1: reg 0x10: [mem 0xd4011000-0xd40117ff] [ 0.136520] pci 0000:02:04.1: reg 0x14: [mem 0xd4014000-0xd4017fff] [ 0.136642] pci 0000:02:04.1: supports D1 D2 [ 0.136645] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot [ 0.136724] pci 0000:02:04.2: [104c:803b] type 00 class 0x018000 [ 0.136756] pci 0000:02:04.2: reg 0x10: [mem 0xd4018000-0xd4018fff] [ 0.136887] pci 0000:02:04.2: supports D1 D2 [ 0.136890] pci 0000:02:04.2: PME# supported from D0 D1 D2 D3hot [ 0.136968] pci 0000:02:04.3: [104c:803c] type 00 class 0x080500 [ 0.136998] pci 0000:02:04.3: reg 0x10: [mem 0xd4019000-0xd40190ff] [ 0.137129] pci 0000:02:04.3: supports D1 D2 [ 0.137132] pci 0000:02:04.3: PME# supported from D0 D1 D2 D3hot [ 0.137258] pci 0000:00:14.4: PCI bridge to [bus 02-03] (subtractive decode) [ 0.137271] pci 0000:00:14.4: bridge window [mem 0xd4000000-0xd42fffff] [ 0.137278] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.137281] pci 0000:00:14.4: bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode) [ 0.137285] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.137351] pci_bus 0000:03: busn_res: can not insert [bus 03-ff] under [bus 02-03] (conflicts with (null) [bus 02-03]) [ 0.137358] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 06 [ 0.137362] pci_bus 0000:03: busn_res: can not insert [bus 03-06] under [bus 02-03] (conflicts with (null) [bus 02-03]) [ 0.137368] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03] [ 0.137392] pci_bus 0000:00: on NUMA node 0 [ 0.138059] ACPI: PCI Interrupt Link [C12B] (IRQs 10 11) *0, disabled. [ 0.138157] ACPI: PCI Interrupt Link [C12C] (IRQs 10 11) *0, disabled. [ 0.138253] ACPI: PCI Interrupt Link [C12D] (IRQs 10 11) *0, disabled. [ 0.138348] ACPI: PCI Interrupt Link [C12E] (IRQs 10 11) *0, disabled. [ 0.138444] ACPI: PCI Interrupt Link [C12F] (IRQs 10 11) *0, disabled. [ 0.138539] ACPI: PCI Interrupt Link [C130] (IRQs 9) *0, disabled. [ 0.138634] ACPI: PCI Interrupt Link [C131] (IRQs 10 11) *0, disabled. [ 0.138738] ACPI: PCI Interrupt Link [C132] (IRQs 10 11) *5 [ 0.139296] ACPI: Enabled 11 GPEs in block 00 to 1F [ 0.139307] ACPI: \_SB_.C079: notify handler is installed [ 0.139387] Found 1 acpi root devices [ 0.139440] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.139624] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.139628] vgaarb: loaded [ 0.139629] vgaarb: bridge control possible 0000:01:05.0 [ 0.139965] SCSI subsystem initialized [ 0.140054] libata version 3.00 loaded. [ 0.140098] ACPI: bus type USB registered [ 0.140129] usbcore: registered new interface driver usbfs [ 0.140145] usbcore: registered new interface driver hub [ 0.140175] usbcore: registered new device driver usb [ 0.140327] PCI: Using ACPI for IRQ routing [ 0.152326] PCI: pci_cache_line_size set to 64 bytes [ 0.152364] pci 0000:00:14.2: address space collision: [mem 0xd4408000-0xd440bfff 64bit] conflicts with 0000:00:12.0 [mem 0xd4409000-0xd44091ff] [ 0.152423] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.152427] e820: reserve RAM buffer [mem 0x77fd0000-0x77ffffff] [ 0.152566] NetLabel: Initializing [ 0.152569] NetLabel: domain hash size = 128 [ 0.152570] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.152590] NetLabel: unlabeled traffic allowed by default [ 0.152774] Switched to clocksource refined-jiffies [ 0.161019] AppArmor: AppArmor Filesystem Enabled [ 0.161066] pnp: PnP ACPI init [ 0.161087] ACPI: bus type PNP registered [ 0.161301] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.161306] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.161310] system 00:00: [mem 0x00100000-0x77ffffff] could not be reserved [ 0.161316] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.161626] pnp 00:01: Plug and Play ACPI device, IDs PNP0401 (disabled) [ 0.161741] pnp 00:02: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.161790] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.161807] pnp 00:04: [dma 4] [ 0.161839] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.161871] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.161911] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.161978] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.162018] pnp 00:08: Plug and Play ACPI device, IDs SYN0118 SYN0100 SYN0002 PNP0f13 (active) [ 0.162211] system 00:09: [io 0x040b] has been reserved [ 0.162215] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.162218] system 00:09: [io 0x04d6] has been reserved [ 0.162225] system 00:09: [io 0x0500-0x051f] has been reserved [ 0.162229] system 00:09: [io 0x0c00-0x0c01] has been reserved [ 0.162232] system 00:09: [io 0x0c14] has been reserved [ 0.162236] system 00:09: [io 0x0c50-0x0c51] has been reserved [ 0.162239] system 00:09: [io 0x0c52] has been reserved [ 0.162243] system 00:09: [io 0x0c6c] has been reserved [ 0.162247] system 00:09: [io 0x0c6f] has been reserved [ 0.162250] system 00:09: [io 0x0cd4-0x0cdf] has been reserved [ 0.162255] system 00:09: [mem 0xffb00000-0xffbfffff] could not be reserved [ 0.162259] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved [ 0.162263] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.162674] system 00:0a: [io 0x8000-0x802f] could not be reserved [ 0.162678] system 00:0a: [io 0x8100-0x811f] has been reserved [ 0.162682] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.162686] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.162690] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.162993] system 00:0b: [mem 0x78000000-0x7fffffff] has been reserved [ 0.162997] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.163002] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.163016] pnp: PnP ACPI: found 12 devices [ 0.163018] ACPI: bus type PNP unregistered [ 0.163021] PnPBIOS: Disabled by ACPI PNP [ 0.199539] Switched to clocksource acpi_pm [ 0.199581] pci 0000:02:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.199585] pci 0000:02:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.199590] pci 0000:00:14.4: bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000 [ 0.199595] pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.199600] pci 0000:00:14.4: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 02-03] add_size 4000000 [ 0.199608] pci 0000:00:14.4: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.199612] pci 0000:00:14.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.199619] pci 0000:00:14.4: BAR 15: assigned [mem 0x80000000-0x83ffffff pref] [ 0.199624] pci 0000:00:12.0: BAR 6: assigned [mem 0x84000000-0x8407ffff pref] [ 0.199629] pci 0000:00:14.2: BAR 0: assigned [mem 0x84080000-0x84083fff 64bit] [ 0.199649] pci 0000:00:14.4: BAR 13: assigned [io 0x1000-0x1fff] [ 0.199655] pci 0000:01:05.0: BAR 6: assigned [mem 0xd4320000-0xd433ffff pref] [ 0.199659] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.199663] pci 0000:00:01.0: bridge window [io 0x6000-0x6fff] [ 0.199667] pci 0000:00:01.0: bridge window [mem 0xd4300000-0xd43fffff] [ 0.199671] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] [ 0.199676] pci 0000:00:04.0: PCI bridge to [bus 10] [ 0.199680] pci 0000:00:04.0: bridge window [io 0x4000-0x5fff] [ 0.199684] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd3ffffff] [ 0.199689] pci 0000:00:05.0: PCI bridge to [bus 20] [ 0.199693] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] [ 0.199697] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] [ 0.199703] pci 0000:00:06.0: PCI bridge to [bus 30] [ 0.199708] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] [ 0.199715] pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.199719] pci 0000:02:04.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 [ 0.199723] pci 0000:02:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.199726] pci 0000:02:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.199730] pci 0000:02:04.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref] [ 0.199735] pci 0000:02:04.0: BAR 16: assigned [mem 0x88000000-0x8bffffff] [ 0.199738] pci 0000:02:04.0: BAR 13: assigned [io 0x1000-0x10ff] [ 0.199742] pci 0000:02:04.0: BAR 14: assigned [io 0x1400-0x14ff] [ 0.199746] pci 0000:02:04.0: CardBus bridge to [bus 03-06] [ 0.199749] pci 0000:02:04.0: bridge window [io 0x1000-0x10ff] [ 0.199759] pci 0000:02:04.0: bridge window [io 0x1400-0x14ff] [ 0.199765] pci 0000:02:04.0: bridge window [mem 0x80000000-0x83ffffff pref] [ 0.199773] pci 0000:02:04.0: bridge window [mem 0x88000000-0x8bffffff] [ 0.199779] pci 0000:00:14.4: PCI bridge to [bus 02-03] [ 0.199784] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] [ 0.199793] pci 0000:00:14.4: bridge window [mem 0xd4000000-0xd42fffff] [ 0.199799] pci 0000:00:14.4: bridge window [mem 0x80000000-0x83ffffff pref] [ 0.199809] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.199812] pci_bus 0000:00: resource 5 [mem 0x80000000-0xfcffffffff] [ 0.199815] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.199819] pci_bus 0000:01: resource 0 [io 0x6000-0x6fff] [ 0.199822] pci_bus 0000:01: resource 1 [mem 0xd4300000-0xd43fffff] [ 0.199826] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc7ffffff 64bit pref] [ 0.199829] pci_bus 0000:10: resource 0 [io 0x4000-0x5fff] [ 0.199833] pci_bus 0000:10: resource 1 [mem 0xd0000000-0xd3ffffff] [ 0.199836] pci_bus 0000:20: resource 0 [io 0x2000-0x3fff] [ 0.199839] pci_bus 0000:20: resource 1 [mem 0xcc000000-0xcfffffff] [ 0.199843] pci_bus 0000:30: resource 1 [mem 0xc8000000-0xc80fffff] [ 0.199846] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.199849] pci_bus 0000:02: resource 1 [mem 0xd4000000-0xd42fffff] [ 0.199853] pci_bus 0000:02: resource 2 [mem 0x80000000-0x83ffffff pref] [ 0.199856] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] [ 0.199859] pci_bus 0000:02: resource 5 [mem 0x80000000-0xfcffffffff] [ 0.199862] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.199866] pci_bus 0000:03: resource 0 [io 0x1000-0x10ff] [ 0.199869] pci_bus 0000:03: resource 1 [io 0x1400-0x14ff] [ 0.199872] pci_bus 0000:03: resource 2 [mem 0x80000000-0x83ffffff pref] [ 0.199876] pci_bus 0000:03: resource 3 [mem 0x88000000-0x8bffffff] [ 0.199923] NET: Registered protocol family 2 [ 0.199923] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.199923] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.199923] TCP: Hash tables configured (established 8192 bind 8192) [ 0.199923] TCP: reno registered [ 0.199923] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.199923] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.199923] NET: Registered protocol family 1 [ 0.199923] pci 0000:00:00.0: MSI quirk detected; MSI disabled [ 0.199923] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.199923] pci 0000:01:05.0: Boot video device [ 0.199923] PCI: CLS 64 bytes, default 64 [ 0.199923] Trying to unpack rootfs image as initramfs... [ 6.098206] Freeing initrd memory: 19560K (f68e4000 - f7bfe000) [ 6.098412] microcode: AMD CPU family 0xf not supported [ 6.098415] Scanning for low memory corruption every 60 seconds [ 6.098701] Initialise system trusted keyring [ 6.098766] audit: initializing netlink socket (disabled) [ 6.098783] type=2000 audit(1414144741.095:1): initialized [ 6.130547] bounce pool size: 64 pages [ 6.130561] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 6.132319] zbud: loaded [ 6.132410] VFS: Disk quotas dquot_6.5.2 [ 6.132471] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 6.133122] fuse init (API version 7.22) [ 6.133216] msgmni has been set to 1720 [ 6.133298] Key type big_key registered [ 6.133618] Key type asymmetric registered [ 6.133621] Asymmetric key parser 'x509' registered [ 6.133667] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 6.133702] io scheduler noop registered [ 6.133705] io scheduler deadline registered (default) [ 6.133741] io scheduler cfq registered [ 6.133988] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 6.134011] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 6.134086] ipmi message handler version 39.2 [ 6.137800] ACPI: AC Adapter [C1C3] (on-line) [ 6.137882] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 6.137889] ACPI: Sleep Button [C266] [ 6.137938] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 6.137976] ACPI: Lid Switch [C267] [ 6.138028] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 6.138031] ACPI: Power Button [PWRF] [ 6.138117] ACPI: Fan [C364] (off) [ 6.138166] ACPI: Fan [C365] (off) [ 6.138216] ACPI: Fan [C366] (off) [ 6.138264] ACPI: Fan [C367] (off) [ 6.146130] thermal LNXTHERM:00: registered as thermal_zone0 [ 6.146133] ACPI: Thermal Zone [TZ1] (42 C) [ 6.149838] thermal LNXTHERM:01: registered as thermal_zone1 [ 6.149840] ACPI: Thermal Zone [TZ2] (28 C) [ 6.164866] thermal LNXTHERM:02: registered as thermal_zone2 [ 6.164868] ACPI: Thermal Zone [TZ3] (26 C) [ 6.164944] GHES: HEST is not enabled! [ 6.165073] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 6.166756] Linux agpgart interface v0.103 [ 6.167143] tpm_tis 00:02: 1.2 TPM (device-id 0xB, rev-id 16) [ 6.167569] isapnp: Scanning for PnP cards... [ 6.524361] isapnp: No Plug & Play device found [ 6.560892] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 6.560900] ACPI: Battery Slot [C1C5] (battery present) [ 6.560986] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 6.560994] ACPI: Battery Slot [C1C4] (battery absent) [ 6.584115] tpm_tis 00:02: Adjusting TPM timeout parameters. [ 7.568070] tpm_tis 00:02: TPM is disabled/deactivated (0x7) [ 7.569752] brd: module loaded [ 7.570673] loop: module loaded [ 7.571385] libphy: Fixed MDIO Bus: probed [ 7.571553] tun: Universal TUN/TAP device driver, 1.6 [ 7.571555] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 7.571602] PPP generic driver version 2.4.2 [ 7.571658] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.571663] ehci-pci: EHCI PCI platform driver [ 7.571894] ehci-pci 0000:00:13.2: EHCI Host Controller [ 7.571903] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 1 [ 7.571987] ehci-pci 0000:00:13.2: irq 19, io mem 0xd4403000 [ 7.580026] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 7.580125] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.580128] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.580132] usb usb1: Product: EHCI Host Controller [ 7.580135] usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd [ 7.580138] usb usb1: SerialNumber: 0000:00:13.2 [ 7.580279] hub 1-0:1.0: USB hub found [ 7.580289] hub 1-0:1.0: 8 ports detected [ 7.580697] ehci-platform: EHCI generic platform driver [ 7.580711] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.580713] ohci-pci: OHCI PCI platform driver [ 7.580872] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 7.580878] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 7.580898] ohci-pci 0000:00:13.0: irq 19, io mem 0xd4401000 [ 7.640055] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.640059] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.640062] usb usb2: Product: OHCI PCI host controller [ 7.640065] usb usb2: Manufacturer: Linux 3.13.0-32-generic ohci_hcd [ 7.640068] usb usb2: SerialNumber: 0000:00:13.0 [ 7.640187] hub 2-0:1.0: USB hub found [ 7.640202] hub 2-0:1.0: 4 ports detected [ 7.640544] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 7.640551] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 7.640570] ohci-pci 0000:00:13.1: irq 19, io mem 0xd4402000 [ 7.700044] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.700048] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.700051] usb usb3: Product: OHCI PCI host controller [ 7.700054] usb usb3: Manufacturer: Linux 3.13.0-32-generic ohci_hcd [ 7.700057] usb usb3: SerialNumber: 0000:00:13.1 [ 7.700171] hub 3-0:1.0: USB hub found [ 7.700188] hub 3-0:1.0: 4 ports detected [ 7.700379] ohci-platform: OHCI generic platform driver [ 7.700392] uhci_hcd: USB Universal Host Controller Interface driver [ 7.700505] i8042: PNP: PS/2 Controller [PNP0303:C21E,PNP0f13:C21F] at 0x60,0x64 irq 1,12 [ 7.702226] i8042: Detected active multiplexing controller, rev 1.1 [ 7.702978] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 7.702985] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 7.703015] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 7.703051] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 7.703077] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 7.703216] mousedev: PS/2 mouse device common for all mice [ 7.703401] rtc_cmos 00:06: RTC can wake from S4 [ 7.703572] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 7.703606] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram [ 7.703704] device-mapper: uevent: version 1.0.3 [ 7.703778] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 7.703801] platform eisa.0: Probing EISA bus 0 [ 7.703806] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 7.703810] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 7.703813] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 7.703817] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 7.703820] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 7.703824] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 7.703828] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 7.703831] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 7.703835] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 7.703838] platform eisa.0: EISA: Detected 0 cards [ 7.703847] cpufreq-nforce2: No nForce2 chipset. [ 7.703851] ledtrig-cpu: registered to indicate activity on CPUs [ 7.704071] TCP: cubic registered [ 7.704204] NET: Registered protocol family 10 [ 7.704457] NET: Registered protocol family 17 [ 7.704472] Key type dns_resolver registered [ 7.704663] Using IPI No-Shortcut mode [ 7.704768] Loading compiled-in X.509 certificates [ 7.709563] Loaded X.509 cert 'Magrathea: Glacier signing key: a7fc6590fc4a8d859aaebda2ca5dd04716244fa0' [ 7.709582] registered taskstats version 1 [ 7.712905] Key type trusted registered [ 7.715761] Key type encrypted registered [ 7.718614] AppArmor: AppArmor sha1 policy hashing enabled [ 7.727539] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 7.764070] tpm_tis 00:02: A TPM error (7) occurred attempting to read a pcr value [ 7.764073] IMA: No TPM chip found, activating TPM-bypass! [ 7.764426] regulator-dummy: disabling [ 7.764469] Magic number: 2:225:981 [ 7.764608] rtc_cmos 00:06: setting system clock to 2014-10-24 09:59:03 UTC (1414144743) [ 7.764739] powernow-k8: fid 0xa (1800 MHz), vid 0x10 [ 7.764741] powernow-k8: fid 0x8 (1600 MHz), vid 0x12 [ 7.764743] powernow-k8: fid 0x0 (800 MHz), vid 0x18 [ 7.764772] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3500+ (1 cpu cores) (version 2.20.00) [ 7.764780] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 7.764782] EDD information not available. [ 7.764826] PM: Hibernation image not present or could not be loaded. [ 7.765477] Freeing unused kernel memory: 872K (c19b4000 - c1a8e000) [ 7.765525] Write protecting the kernel text: 6532k [ 7.765606] Write protecting the kernel read-only data: 2764k [ 7.765608] NX-protecting the kernel data: 5756k [ 7.788299] systemd-udevd[91]: starting version 204 [ 7.847205] [Firmware Bug]: _BCQ is used instead of _BQC [ 7.847220] ACPI: Video Device [C07B] (multi-head: yes rom: no post: no) [ 7.847237] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 7.855569] wmi: Mapper loaded [ 7.855819] acpi device:03: registered as cooling_device5 [ 7.855933] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input8 [ 7.902140] sata_sil 0000:00:12.0: version 2.4 [ 7.902148] sata_sil 0000:00:12.0: quirky BIOS, skipping spindown on poweroff and hibernation [ 7.906692] scsi0 : sata_sil [ 7.911354] [drm] Initialized drm 1.1.0 20060810 [ 7.914015] scsi1 : sata_sil [ 7.914109] ata1: SATA max UDMA/100 mmio m512@0xd4409000 tf 0xd4409080 irq 16 [ 7.914114] ata2: SATA max UDMA/100 mmio m512@0xd4409000 tf 0xd44090c0 irq 16 [ 7.928583] scsi2 : pata_atiixp [ 7.933641] scsi3 : pata_atiixp [ 7.933706] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x7040 irq 14 [ 7.933709] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x7048 irq 15 [ 7.981030] pps_core: LinuxPPS API ver. 1 registered [ 7.981035] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 8.005495] sdhci: Secure Digital Host Controller Interface driver [ 8.005500] sdhci: Copyright(c) Pierre Ossman [ 8.012092] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00 [ 8.012103] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243) [ 8.012111] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243) [ 8.012118] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243) [ 8.012125] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243) [ 8.012825] PTP clock support registered [ 8.028369] sdhci-pci 0000:02:04.3: SDHCI controller found [104c:803c] (rev 0) [ 8.028528] sdhci-pci 0000:02:04.3: dummy supplies not allowed [ 8.028531] mmc0: no vqmmc regulator found [ 8.028534] sdhci-pci 0000:02:04.3: dummy supplies not allowed [ 8.028536] mmc0: no vmmc regulator found [ 8.037029] mmc0: SDHCI controller on PCI [0000:02:04.3] using PIO [ 8.047225] tg3.c:v3.134 (Sep 16, 2013) [ 8.098195] tg3 0000:02:01.0 eth0: Tigon3 [partno(BCM95788A50) rev 3003] (PCI:33MHz:32-bit) MAC address 00:17:08:42:f7:27 [ 8.098202] tg3 0000:02:01.0 eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0], EEE[0]) [ 8.098206] tg3 0000:02:01.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 8.098210] tg3 0000:02:01.0 eth0: dma_rwctrl[763f0000] dma_mask[32-bit] [ 8.099022] ata3.00: ATAPI: PIONEER DVDRW DVR-K17, 1.05, max MWDMA2 [ 8.100276] ssb: Sonics Silicon Backplane found on PCI device 0000:30:00.0 [ 8.186889] ata3.00: configured for MWDMA2 [ 8.187054] firewire_ohci 0000:02:04.1: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 8.263216] [drm] radeon kernel modesetting enabled. [ 8.292113] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8.293191] [drm] initializing kernel modesetting (RS480 0x1002:0x5975 0x103C:0x30B0). [ 8.293217] [drm] register mmio base: 0xD4300000 [ 8.293219] [drm] register mmio size: 65536 [ 8.293352] [drm] Generation 2 PCI interface, using max accessible memory [ 8.293361] radeon 0000:01:05.0: VRAM: 128M 0x0000000078000000 - 0x000000007FFFFFFF (128M used) [ 8.293365] radeon 0000:01:05.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF [ 8.293374] [drm] Detected VRAM RAM=128M, BAR=128M [ 8.293376] [drm] RAM width 128bits DDR [ 8.296144] [TTM] Zone kernel: Available graphics memory: 440904 kiB [ 8.296150] [TTM] Zone highmem: Available graphics memory: 967148 kiB [ 8.296152] [TTM] Initializing pool allocator [ 8.296157] [TTM] Initializing DMA pool allocator [ 8.296188] [drm] radeon: 128M of VRAM memory ready [ 8.296190] [drm] radeon: 512M of GTT memory ready. [ 8.296218] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 8.300399] ata1.00: ATA-7: FUJITSU MHV2060BH PL, 892C, max UDMA/100 [ 8.300406] ata1.00: 117231408 sectors, multi 16: LBA48 [ 8.307369] [drm] radeon: 2 quad pipes, 1 z pipes initialized. [ 8.313220] [drm] PCIE GART of 512M enabled (table at 0x0000000037600000). [ 8.320368] ata1.00: configured for UDMA/100 [ 8.320544] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2060B 892C PQ: 0 ANSI: 5 [ 8.320832] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 8.320909] sd 0:0:0:0: [sda] Write Protect is off [ 8.320914] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.320947] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.321307] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 8.323719] radeon 0000:01:05.0: WB enabled [ 8.323727] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000080000000 and cpu addr 0xf70e9000 [ 8.323731] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 8.323733] [drm] Driver supports precise vblank timestamp query. [ 8.323764] [drm] radeon: irq initialized. [ 8.323777] [drm] Loading R300 Microcode [ 8.323979] [drm] radeon: ring at 0x0000000080001000 [ 8.324055] [drm] ring test succeeded in 0 usecs [ 8.325231] [drm] ib test succeeded in 0 usecs [ 8.326594] [drm] Panel ID String: LPL [ 8.326598] [drm] Panel Size 1024x768 [ 8.350571] [drm] radeon legacy LVDS backlight initialized [ 8.350574] [drm] Radeon Display Connectors [ 8.350576] [drm] Connector 0: [ 8.350578] [drm] VGA-1 [ 8.350581] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68 [ 8.350582] [drm] Encoders: [ 8.350584] [drm] CRT1: INTERNAL_DAC2 [ 8.350586] [drm] Connector 1: [ 8.350588] [drm] LVDS-1 [ 8.350591] [drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4 [ 8.350593] [drm] Encoders: [ 8.350594] [drm] LCD1: INTERNAL_LVDS [ 8.350596] [drm] Connector 2: [ 8.350598] [drm] SVIDEO-1 [ 8.350599] [drm] Encoders: [ 8.350601] [drm] TV1: INTERNAL_DAC2 [ 8.355106] [drm] radeon: power management initialized [ 8.436510] [drm] fb mappable at 0xC0040000 [ 8.436515] [drm] vram apper at 0xC0000000 [ 8.436517] [drm] size 3145728 [ 8.436519] [drm] fb depth is 24 [ 8.436520] [drm] pitch is 4096 [ 8.436649] fbcon: radeondrmfb (fb0) is primary device [ 8.461215] usb 3-1: new full-speed USB device number 2 using ohci-pci [ 8.481580] Console: switching to colour frame buffer device 128x48 [ 8.488910] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device [ 8.488913] radeon 0000:01:05.0: registered panic notifier [ 8.488931] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:05.0 on minor 0 [ 8.660047] ata2: SATA link down (SStatus 0 SControl 300) [ 8.661678] scsi 2:0:0:0: CD-ROM PIONEER DVDRW DVR-K17 1.05 PQ: 0 ANSI: 5 [ 8.662816] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 8.662819] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 8.663225] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 8.663475] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 8.677076] usb 3-1: New USB device found, idVendor=08ff, idProduct=2580 [ 8.677080] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 8.677083] usb 3-1: Product: Fingerprint Sensor [ 8.684124] firewire_core 0000:02:04.1: created device fw0: GUID 00023f9929014c0c, S400 [ 8.693655] sda: sda1 sda2 [ 8.694012] sd 0:0:0:0: [sda] Attached SCSI disk [ 8.767678] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0, board id: 71, fw id: 240405 [ 8.767690] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0 [ 8.807666] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12 [ 10.587301] random: nonblocking pool is initialized [ 11.273401] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 11.307808] ISO 9660 Extensions: RRIP_1991A [ 12.107673] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 77.086628] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 79.536148] systemd-udevd[1046]: starting version 204 [ 89.173809] Bluetooth: Core ver 2.17 [ 89.176153] NET: Registered protocol family 31 [ 89.176156] Bluetooth: HCI device and connection manager initialized [ 89.176167] Bluetooth: HCI socket layer initialized [ 89.176171] Bluetooth: L2CAP socket layer initialized [ 89.176180] Bluetooth: SCO socket layer initialized [ 90.255902] Bluetooth: RFCOMM TTY layer initialized [ 90.255918] Bluetooth: RFCOMM socket layer initialized [ 90.255929] Bluetooth: RFCOMM ver 1.11 [ 91.217431] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 91.217438] Bluetooth: BNEP filters: protocol multicast [ 91.217450] Bluetooth: BNEP socket layer initialized [ 91.432724] parport_pc 00:01: [io 0x0378-0x037f] [ 91.432735] parport_pc 00:01: [io 0x0778-0x077a] [ 91.432803] parport_pc 00:01: [irq 5] [ 91.432808] parport_pc 00:01: [dma 1] [ 91.434004] parport_pc 00:01: activated [ 91.434009] parport_pc 00:01: reported by Plug and Play ACPI [ 91.434089] parport0: PC-style at 0x378 (0x778), irq 5, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 91.556552] lp0: using parport0 (interrupt-driven). [ 92.107157] ppdev: user-space parallel port driver [ 93.638285] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 93.804326] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8200, revision 0 [ 94.412694] yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:30b0] [ 94.412724] yenta_cardbus 0000:02:04.0: Enabling burst memory read transactions [ 94.412732] yenta_cardbus 0000:02:04.0: Using INTVAL to route CSC interrupts to PCI [ 94.412735] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI [ 94.412743] yenta_cardbus 0000:02:04.0: TI: mfunc 0x01a11002, devctl 0x64 [ 94.644744] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0cd8, PCI irq 20 [ 94.644752] yenta_cardbus 0000:02:04.0: Socket status: 30000006 [ 94.644757] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06 [ 94.644767] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io 0x1000-0x1fff] [ 94.644772] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x1000-0x1fff: [ 94.646597] excluding 0x1000-0x10ff 0x1400-0x14ff [ 94.653624] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xd4000000-0xd42fffff] [ 94.653629] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd4000000-0xd42fffff: [ 94.653632] excluding 0xd4000000-0xd402ffff [ 94.653645] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref] [ 94.653649] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff: [ 94.653658] excluding 0x80000000-0x83ffffff [ 95.200867] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 100.145514] device-mapper: multipath: version 1.6.0 loaded [ 102.866977] init: failsafe main process (1235) killed by TERM signal [ 102.884438] cfg80211: Calling CRDA to update world regulatory domain [ 103.972178] input: HP WMI hotkeys as /devices/virtual/input/input14 [ 107.387923] hda-intel 0000:00:14.2: Using LPIB position fix [ 107.390080] cfg80211: World regulatory domain updated: [ 107.390085] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 107.390088] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 107.390091] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 107.390094] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 107.390096] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 107.390099] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 107.393290] hda-intel 0000:00:14.2: Enable sync_write for stable communication [ 108.454356] autoconfig: line_outs=1 (0x5/0x0/0x0/0x0/0x0) type:speaker [ 108.454371] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 108.454374] hp_outs=1 (0x6/0x0/0x0/0x0/0x0) [ 108.454376] mono: mono_out=0x0 [ 108.454377] inputs: [ 108.454380] Mic=0x8 [ 108.454382] Internal Mic=0x18 [ 108.454384] Line=0x9 [ 108.461652] autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line [ 108.461667] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 108.461670] hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 108.461672] mono: mono_out=0x0 [ 108.461673] inputs: [ 108.465207] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 108.465498] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input16 [ 108.465739] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input15 [ 115.086021] b43-phy0: Broadcom 4311 WLAN found (core revision 10) [ 115.128023] b43-phy0: Found PHY: Analog 4, Type 2 (G), Revision 8 [ 115.152118] Broadcom 43xx driver loaded [ Features: PNL ] [ 115.154341] b43 ssb0:0: Direct firmware load failed with error -2 [ 115.154348] b43 ssb0:0: Falling back to user helper [ 115.155205] b43 ssb0:0: Direct firmware load failed with error -2 [ 115.155210] b43 ssb0:0: Falling back to user helper [ 115.157170] b43 ssb0:0: Direct firmware load failed with error -2 [ 115.157176] b43 ssb0:0: Falling back to user helper [ 115.160939] b43 ssb0:0: Direct firmware load failed with error -2 [ 115.160945] b43 ssb0:0: Falling back to user helper [ 115.162517] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found [ 115.162523] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found [ 115.162526] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 116.835019] zram: module is from the staging directory, the quality is unknown, you have been warned. [ 116.843878] zram: Created 1 device(s) ... [ 118.795865] init: alsa-restore main process (1592) terminated with status 99 [ 119.396427] Adding 967144k swap on /dev/zram0. Priority:5 extents:1 across:967144k SSFS [ 132.004062] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 132.004714] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 143.936923] init: plymouth-upstart-bridge main process ended, respawning [ 143.962606] init: plymouth-upstart-bridge main process ended, respawning [ 232.412279] yenta_cardbus 0000:02:04.0: CardBus bridge to [bus 03-06] [ 232.412298] yenta_cardbus 0000:02:04.0: bridge window [io 0x1000-0x10ff] [ 232.412316] yenta_cardbus 0000:02:04.0: bridge window [io 0x1400-0x14ff] [ 232.412329] yenta_cardbus 0000:02:04.0: bridge window [mem 0x80000000-0x83ffffff pref] [ 232.412341] yenta_cardbus 0000:02:04.0: bridge window [mem 0x88000000-0x8bffffff] [ 259.755134] tg3 0000:02:01.0 eth0: Link is up at 1000 Mbps, full duplex [ 259.755158] tg3 0000:02:01.0 eth0: Flow control is off for TX and off for RX [ 259.755434] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
Der "nodmraid" kernel-parameter bzw. "ap-get purge dmraid" haben auch nicht geholfen.
"cat /proc/partitions", "parted -l", "fdisk -l" zeigen alle die SSD nicht an.
Ich habe schon das BIOS auf AHCI umgestellt (SATA Native Mode), dass brachte aber auch keine Besserung. Das geht bei dem BIOS nur über das "HP BIOS Configuration Utility" http://ftp.hp.com/pub/caps-softpaq/cmit/HP_BCU.html.
Da "sata_sil" geladen wurde habe ich einen Test mit einem alten P4-Board und einer Sil3512 PCI-Controller-Card gemacht. Mit gleichem Ergebnis, HDD funktioniert, bei der SSD werde ich nach passenden Treibern gefragt. Es scheint also wirklich an der Kombination aus dem Silicon Image Controller und der SanDisk SSD zu liegen. Die gleiche SSD läuft bereits problemlos mit Lubuntu in einem eeePC.
Hat Jemand noch eine Idee was ich noch machen könnte? Ich würde wirklich gern die 14.04 LTS auf die SSD im HP installieren.
