ubuntuusers.de

Am Sonntag, 24.11, wird gegen 16 Uhr eine Inyoka-Version ausgerollt. Das Portal kann für ein paar Minuten nicht erreichbar sein.

WLAN PCI wird nicht bei jedem Start erkannt

Status: Gelöst | Ubuntu-Version: Ubuntu 11.10 (Oneiric Ocelot)
Antworten |

Longli

Anmeldungsdatum:
24. Dezember 2010

Beiträge: 28

Hallo Leute, seit dem Wechsel zur Version 11 habe ich folgendes, für mich sehr seltsames, Problem. Ich nutze Ubuntu auf einem älteren PC und habe, ehrlich gesagt, keine wirkliche Peilung was ich da mache und leider fehlt mir die Zeit tiefer in die Materie vorzudringen (im Beruf bin ich gezwungen Windows zu nutzen). Falls jemandem etwas dazu einfällt, bitte Idioten sicher vermitteln ☺ WLAN PCI Karte Netgear WG 311v3 Bei jedem 2. oder 3. Start wird die Karte nicht erkannt. Laut iwconfig "no wireless extensions".

Beim nächsten oder übernächsten Rechnerstart wird die Karte erkannt und stellt die Verbindung problemlos her.

Ich habe Karte bereits in einen anderen Port umgesteckt, leider ohne Erfolg. Hat jemand eine Idee für mich?

sdx23

Anmeldungsdatum:
19. August 2008

Beiträge: 154

Die Ausgabe von dmesg könnte hier weitere Erkenntnisse liefern, am besten einmal wenn es funktioniert hat und einmal wenn nicht. lspci ebenfalls dazu.

-sdx23

Ubunux

Avatar von Ubunux

Anmeldungsdatum:
12. Juni 2006

Beiträge: 17056

Bitte beachte Vor dem Erstellen eines neuen Beitrags bitte lesen! und zeige uns alle geforderten Infos in Codeblöcken.

elektronenblitz63

Avatar von elektronenblitz63

Anmeldungsdatum:
16. Januar 2007

Beiträge: 29307

Wohnort: NRW

Hallo,
ergänzend dazu dürfte folgende Abfrage den Fehler zeigen:

dmesg | egrep 'ndis|wlan'

Longli

(Themenstarter)

Anmeldungsdatum:
24. Dezember 2010

Beiträge: 28

Danke für eure, extrem schnellen, Bemühungen. Ich hoffe ich habe das mit dem Codeblock so richtig hinbekommen. Das ist die Variante, in der es nicht funktioniert. Bin dann mal am Neustarten.

[    0.104818] pci 0000:01:00.0: reg 18: [mem 0xe5000000-0xe500ffff]
[    0.104844] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.104864] pci 0000:01:00.0: supports D1 D2
[    0.104885] pci 0000:01:00.1: [1002:4164] type 0 class 0x000380
[    0.104899] pci 0000:01:00.1: reg 10: [mem 0xd8000000-0xdfffffff pref]
[    0.104908] pci 0000:01:00.1: reg 14: [mem 0xe5010000-0xe501ffff]
[    0.104951] pci 0000:01:00.1: supports D1 D2
[    0.104991] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.104997] pci 0000:00:01.0:   bridge window [io  0x6000-0x6fff]
[    0.105003] pci 0000:00:01.0:   bridge window [mem 0xe4000000-0xe5ffffff]
[    0.105009] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff pref]
[    0.105018] pci_bus 0000:00: on NUMA node 0
[    0.105024] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.105232] ACPI Warning: For \_SB_.PCI0._PRT: Return Package type mismatch at index 3 - found Reference, expected Integer (20110413/nspredef-1060)
[    0.105249] ACPI Warning: (PRT[24].Source) SourceName and SourceIndex are reversed, fixed (20110413/rscreate-277)
[    0.105256] ACPI Warning: (PRT[25].Source) SourceName and SourceIndex are reversed, fixed (20110413/rscreate-277)
[    0.105263] ACPI Warning: (PRT[26].Source) SourceName and SourceIndex are reversed, fixed (20110413/rscreate-277)
[    0.105269] ACPI Warning: (PRT[27].Source) SourceName and SourceIndex are reversed, fixed (20110413/rscreate-277)
[    0.105429]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.120745] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[    0.120903] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[    0.121064] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9
[    0.121224] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[    0.121433] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.121438] vgaarb: loaded
[    0.121441] vgaarb: bridge control possible 0000:01:00.0
[    0.121904] SCSI subsystem initialized
[    0.122073] libata version 3.00 loaded.
[    0.122180] usbcore: registered new interface driver usbfs
[    0.122201] usbcore: registered new interface driver hub
[    0.122255] usbcore: registered new device driver usb
[    0.122435] PCI: Using ACPI for IRQ routing
[    0.122443] PCI: pci_cache_line_size set to 32 bytes
[    0.122511] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.122516] reserve RAM buffer: 000000003fff0000 - 000000003fffffff 
[    0.122718] NetLabel: Initializing
[    0.122721] NetLabel:  domain hash size = 128
[    0.122724] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.122747] NetLabel:  unlabeled traffic allowed by default
[    0.137501] AppArmor: AppArmor Filesystem Enabled
[    0.137578] pnp: PnP ACPI init
[    0.137614] ACPI: bus type pnp registered
[    0.137979] pnp 00:00: [mem 0x000cd000-0x000cffff]
[    0.137984] pnp 00:00: [mem 0x000f0000-0x000f7fff]
[    0.137988] pnp 00:00: [mem 0x000f8000-0x000fbfff]
[    0.137991] pnp 00:00: [mem 0x000fc000-0x000fffff]
[    0.137995] pnp 00:00: [mem 0x3fff0000-0x3fffffff]
[    0.137998] pnp 00:00: [mem 0xffff0000-0xffffffff]
[    0.138002] pnp 00:00: [mem 0x00000000-0x0009ffff]
[    0.138005] pnp 00:00: [mem 0x00100000-0x3ffeffff]
[    0.138008] pnp 00:00: [mem 0xfec00000-0xfec00fff]
[    0.138012] pnp 00:00: [mem 0xfee00000-0xfee00fff]
[    0.138015] pnp 00:00: [mem 0xfff80000-0xfffeffff]
[    0.138118] system 00:00: [mem 0x000cd000-0x000cffff] has been reserved
[    0.138124] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.138129] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.138133] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.138138] system 00:00: [mem 0x3fff0000-0x3fffffff] could not be reserved
[    0.138142] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[    0.138147] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.138152] system 00:00: [mem 0x00100000-0x3ffeffff] could not be reserved
[    0.138156] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.138161] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.138165] system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved
[    0.138172] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.138275] pnp 00:01: [bus 00-ff]
[    0.138280] pnp 00:01: [io  0x0cf8-0x0cff]
[    0.138284] pnp 00:01: [io  0x0000-0x0cf7 window]
[    0.138288] pnp 00:01: [io  0x0d00-0x3fff window]
[    0.138291] pnp 00:01: [io  0x4000-0x407f]
[    0.138294] pnp 00:01: [io  0x4080-0x40ff]
[    0.138298] pnp 00:01: [io  0x4100-0x4fff window]
[    0.138301] pnp 00:01: [io  0x5000-0x500f]
[    0.138304] pnp 00:01: [io  0x5010-0xffff window]
[    0.138308] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[    0.138312] pnp 00:01: [mem 0x000c0000-0x000dffff window]
[    0.138316] pnp 00:01: [mem 0x40000000-0xffefffff window]
[    0.138387] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.138575] pnp 00:02: [io  0x0010-0x001f]
[    0.138579] pnp 00:02: [io  0x0022-0x003f]
[    0.138583] pnp 00:02: [io  0x0044-0x005f]
[    0.138586] pnp 00:02: [io  0x0062-0x0063]
[    0.138589] pnp 00:02: [io  0x0065-0x006f]
[    0.138592] pnp 00:02: [io  0x0074-0x007f]
[    0.138595] pnp 00:02: [io  0x0091-0x0093]
[    0.138608] pnp 00:02: [io  0x00a2-0x00bf]
[    0.138611] pnp 00:02: [io  0x00e0-0x00ef]
[    0.138614] pnp 00:02: [io  0x04d0-0x04d1]
[    0.138617] pnp 00:02: [io  0x0294-0x0297]
[    0.138682] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.138687] system 00:02: [io  0x0294-0x0297] has been reserved
[    0.138692] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.138715] pnp 00:03: [dma 4]
[    0.138718] pnp 00:03: [io  0x0000-0x000f]
[    0.138722] pnp 00:03: [io  0x0080-0x0090]
[    0.138725] pnp 00:03: [io  0x0094-0x009f]
[    0.138729] pnp 00:03: [io  0x00c0-0x00df]
[    0.138772] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.138792] pnp 00:04: [io  0x0070-0x0073]
[    0.138815] pnp 00:04: [irq 8]
[    0.138870] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.138887] pnp 00:05: [io  0x0061]
[    0.138928] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.138945] pnp 00:06: [io  0x00f0-0x00ff]
[    0.138954] pnp 00:06: [irq 13]
[    0.138996] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.139169] pnp 00:07: [io  0x03f2-0x03f5]
[    0.139173] pnp 00:07: [io  0x03f7]
[    0.139181] pnp 00:07: [irq 6]
[    0.139185] pnp 00:07: [dma 2]
[    0.139252] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.139510] pnp 00:08: [io  0x03f8-0x03ff]
[    0.139519] pnp 00:08: [irq 4]
[    0.139606] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.139885] pnp 00:09: [io  0x02f8-0x02ff]
[    0.139894] pnp 00:09: [irq 3]
[    0.139976] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.140728] pnp 00:0a: [io  0x0378-0x037f]
[    0.140733] pnp 00:0a: [io  0x0778-0x077b]
[    0.140736] pnp 00:0a: [io  0x0b78-0x0b7b]
[    0.140740] pnp 00:0a: [io  0x0f78-0x0f7b]
[    0.140748] pnp 00:0a: [irq 7]
[    0.140751] pnp 00:0a: [dma 3]
[    0.140865] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.140945] pnp 00:0b: [irq 12]
[    0.140991] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.141033] pnp 00:0c: [io  0x0060]
[    0.141037] pnp 00:0c: [io  0x0064]
[    0.141045] pnp 00:0c: [irq 1]
[    0.141089] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.141319] pnp 00:0d: [io  0x0200-0x0207]
[    0.141377] pnp 00:0d: Plug and Play ACPI device, IDs PNPb02f (active)
[    0.141634] pnp 00:0e: [io  0x0330-0x0331]
[    0.141643] pnp 00:0e: [irq 5]
[    0.141726] pnp 00:0e: Plug and Play ACPI device, IDs PNPb006 (active)
[    0.141741] pnp: PnP ACPI: found 15 devices
[    0.141744] ACPI: ACPI bus type pnp unregistered
[    0.141751] PnPBIOS: Disabled by ACPI PNP
[    0.179216] Switching to clocksource acpi_pm
[    0.179259] PCI: max bus depth: 1 pci_try_num: 2
[    0.179297] pci 0000:01:00.0: BAR 6: assigned [mem 0xe4000000-0xe401ffff pref]
[    0.179304] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.179309] pci 0000:00:01.0:   bridge window [io  0x6000-0x6fff]
[    0.179317] pci 0000:00:01.0:   bridge window [mem 0xe4000000-0xe5ffffff]
[    0.179323] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff pref]
[    0.179342] pci 0000:00:01.0: setting latency timer to 64
[    0.179348] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.179352] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.179356] pci_bus 0000:01: resource 0 [io  0x6000-0x6fff]
[    0.179360] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe5ffffff]
[    0.179364] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
[    0.179465] NET: Registered protocol family 2
[    0.179579] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.179579] Switched to NOHz mode on CPU #0
[    0.179579] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.179579] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.180679] TCP: Hash tables configured (established 131072 bind 65536)
[    0.180685] TCP reno registered
[    0.180694] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.180731] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.180955] NET: Registered protocol family 1
[    0.180986] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.181105] pci 0000:01:00.0: Boot video device
[    0.181113] PCI: CLS 32 bytes, default 32
[    0.181837] audit: initializing netlink socket (disabled)
[    0.181857] type=2000 audit(1326101404.176:1): initialized
[    0.211221] Trying to unpack rootfs image as initramfs...
[    0.260278] highmem bounce pool size: 64 pages
[    0.260292] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.300541] VFS: Disk quotas dquot_6.5.2
[    0.300653] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.301948] fuse init (API version 7.16)
[    0.302112] msgmni has been set to 1704
[    0.312497] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.316309] io scheduler noop registered
[    0.316316] io scheduler deadline registered
[    0.316422] io scheduler cfq registered (default)
[    0.316726] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.316790] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.317039] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.317051] ACPI: Power Button [PWRB]
[    0.317129] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.317136] ACPI: Sleep Button [SLPB]
[    0.317205] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.317210] ACPI: Power Button [PWRF]
[    0.317303] ACPI: Fan [FAN] (on)
[    0.317316] ACPI: acpi_idle registered with cpuidle
[    0.319760] thermal LNXTHERM:00: registered as thermal_zone0
[    0.319764] ACPI: Thermal Zone [THRM] (22 C)
[    0.319801] ERST: Table is not found!
[    0.320160] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.340525] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.340570] isapnp: Scanning for PnP cards...
[    0.472674] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.518355] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.605069] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.624668] Linux agpgart interface v0.103
[    0.624797] agpgart: Detected VIA KT266/KY266x/KT333 chipset
[    0.636282] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[    0.638490] brd: module loaded
[    0.639547] loop: module loaded
[    0.645026] Fixed MDIO Bus: probed
[    0.645083] PPP generic driver version 2.4.2
[    0.645228] tun: Universal TUN/TAP device driver, 1.6
[    0.645232] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.645403] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.645461] ehci_hcd 0000:00:06.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    0.645495] ehci_hcd 0000:00:06.2: EHCI Host Controller
[    0.645567] ehci_hcd 0000:00:06.2: new USB bus registered, assigned bus number 1
[    0.645683] ehci_hcd 0000:00:06.2: irq 19, io mem 0xe6020000
[    0.695643] ehci_hcd 0000:00:06.2: USB 2.0 started, EHCI 1.00
[    0.780131] hub 1-0:1.0: USB hub found
[    0.780159] hub 1-0:1.0: 4 ports detected
[    0.780338] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.780373] uhci_hcd: USB Universal Host Controller Interface driver
[    0.780517] uhci_hcd 0000:00:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.780536] uhci_hcd 0000:00:06.0: UHCI Host Controller
[    0.780678] uhci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2
[    0.780752] uhci_hcd 0000:00:06.0: irq 17, io base 0x00007000
[    0.781001] hub 2-0:1.0: USB hub found
[    0.781009] hub 2-0:1.0: 2 ports detected
[    0.781108] uhci_hcd 0000:00:06.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[    0.781130] uhci_hcd 0000:00:06.1: UHCI Host Controller
[    0.781187] uhci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 3
[    0.781241] uhci_hcd 0000:00:06.1: irq 18, io base 0x00007400
[    0.781455] hub 3-0:1.0: USB hub found
[    0.781462] hub 3-0:1.0: 2 ports detected
[    0.782013] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[    0.782027] uhci_hcd 0000:00:11.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[    0.782034] uhci_hcd 0000:00:11.2: VIA VLink IRQ fixup, from 11 to 10
[    0.782061] uhci_hcd 0000:00:11.2: UHCI Host Controller
[    0.782137] uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 4
[    0.782190] uhci_hcd 0000:00:11.2: irq 10, io base 0x00008000
[    0.782409] hub 4-0:1.0: USB hub found
[    0.782416] hub 4-0:1.0: 2 ports detected
[    0.782507] uhci_hcd 0000:00:11.3: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[    0.782513] uhci_hcd 0000:00:11.3: VIA VLink IRQ fixup, from 11 to 10
[    0.782540] uhci_hcd 0000:00:11.3: UHCI Host Controller
[    0.782599] uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 5
[    0.782628] uhci_hcd 0000:00:11.3: irq 10, io base 0x00008400
[    0.782872] hub 5-0:1.0: USB hub found
[    0.782879] hub 5-0:1.0: 2 ports detected
[    0.783074] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.920552] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.920582] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.920940] mousedev: PS/2 mouse device common for all mice
[    0.921217] rtc_cmos 00:04: RTC can wake from S4
[    0.921379] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.921432] rtc0: alarms up to one year, y3k, 242 bytes nvram
[    0.921676] device-mapper: uevent: version 1.0.3
[    0.921800] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    0.921871] EISA: Probing bus 0 at eisa.0
[    0.921899] Cannot allocate resource for EISA slot 4
[    0.921907] Cannot allocate resource for EISA slot 6
[    0.921910] Cannot allocate resource for EISA slot 7
[    0.921914] Cannot allocate resource for EISA slot 8
[    0.921917] EISA: Detected 0 cards.
[    0.921938] cpufreq-nforce2: No nForce2 chipset.
[    0.921943] cpuidle: using governor ladder
[    0.921946] cpuidle: using governor menu
[    0.921949] EFI Variables Facility v0.08 2004-May-17
[    0.922340] TCP cubic registered
[    0.922612] NET: Registered protocol family 10
[    0.923447] NET: Registered protocol family 17
[    0.923493] Registering the dns_resolver key type
[    0.923540] Using IPI No-Shortcut mode
[    0.923719] PM: Hibernation image not present or could not be loaded.
[    0.923742] registered taskstats version 1
[    0.975096] isapnp: No Plug & Play device found
[    1.032548] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.128091] usb 1-1: new high speed USB device number 2 using ehci_hcd
[    1.197974] Freeing initrd memory: 13324k freed
[    1.228506] Refined TSC clocksource calibration: 1666.372 MHz.
[    1.228519] Switching to clocksource tsc
[    1.243778]   Magic number: 12:75:525
[    1.243994] rtc_cmos 00:04: setting system clock to 2012-01-09 09:30:06 UTC (1326101406)
[    1.244096] powernow-k8: Processor cpuid 662 not supported
[    1.244133] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.244136] EDD information not available.
[    1.244367] Freeing unused kernel memory: 696k freed
[    1.245764] Write protecting the kernel text: 5336k
[    1.245823] Write protecting the kernel read-only data: 2192k
[    1.262272] hub 1-1:1.0: USB hub found
[    1.262558] hub 1-1:1.0: 4 ports detected
[    1.295070] udevd[77]: starting version 173
[    1.526381] Floppy drive(s): fd0 is 1.44M
[    1.564084] FDC 0 is a post-1991 82077
[    1.633328] pata_via 0000:00:11.1: version 0.3.4
[    1.643356] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.652929] scsi0 : pata_via
[    1.655721] scsi1 : pata_via
[    1.658785] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x7c00 irq 14
[    1.658791] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x7c08 irq 15
[    1.679435] 8139cp 0000:00:09.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    1.820628] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
[    1.820636] ata1.00: 160086528 sectors, multi 16: LBA 
[    1.820646] ata1.00: limited to UDMA/33 due to 40-wire cable
[    1.836434] ata1.00: configured for UDMA/33
[    1.836685] scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
[    1.837055] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.837365] sd 0:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
[    1.837461] sd 0:0:0:0: [sda] Write Protect is off
[    1.837467] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.837508] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.881570]  sda: sda1 sda2 < sda5 >
[    1.882183] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.024492] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-M1612, 1004, max UDMA/33
[    2.024501] ata2.01: ATAPI: ATAPI CDROM, V130M, max UDMA/33
[    2.056335] ata2.00: configured for UDMA/33
[    2.072282] ata2.01: configured for UDMA/33
[    2.081280] scsi 1:0:0:0: CD-ROM            TOSHIBA  DVD-ROM SD-M1612 1004 PQ: 0 ANSI: 5
[    2.085329] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[    2.085335] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.085604] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.085746] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.086258] scsi 1:0:1:0: CD-ROM                     ATAPI CDROM      130M PQ: 0 ANSI: 5
[    2.089511] sr1: scsi3-mmc drive: 16x/0x cd/rw xa/form2 cdda tray
[    2.089776] sr 1:0:1:0: Attached scsi CD-ROM sr1
[    2.089921] sr 1:0:1:0: Attached scsi generic sg2 type 5
[    2.091939] 8139too: 8139too Fast Ethernet driver 0.9.28
[    2.092086] 8139too 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.093170] 8139too 0000:00:09.0: eth0: RealTek RTL8139 at 0x7800, 00:50:ba:ba:d7:32, IRQ 16
[    2.535788] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   16.114408] udevd[281]: starting version 173
[   16.173129] Adding 93180k swap on /dev/sda5.  Priority:-1 extents:1 across:93180k 
[   16.185438] lp: driver loaded but no devices found
[   16.372095] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   16.432187] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   16.692173] parport_pc 00:0a: reported by Plug and Play ACPI
[   16.696316] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   16.880842] lp0: using parport0 (interrupt-driven).
[   16.956391] gameport gameport0: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x200, speed 877kHz
[   17.065832] type=1400 audit(1326101422.318:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=501 comm="apparmor_parser"
[   17.076929] type=1400 audit(1326101422.330:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=501 comm="apparmor_parser"
[   17.077354] type=1400 audit(1326101422.330:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=501 comm="apparmor_parser"
[   17.387307] Disabling lock debugging due to kernel taint
[   17.411481] [drm] Initialized drm 1.1.0 20060810
[   17.427165] 8139too 0000:00:09.0: eth0: link down
[   17.431265] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.526103] ndiswrapper version 1.56 loaded (smp=yes, preempt=no)
[   17.548286] irda_init()
[   17.548328] NET: Registered protocol family 23
[   17.621836] ndiswrapper: driver wg311v3 (NETGEAR,08/22/2005,3.2.1.3) loaded
[   17.622301] ndiswrapper 0000:00:08.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   17.628935] ndiswrapper: using IRQ 19
[   17.960328] psmouse serio1: ID: 00 00 3c
[   17.996546] ndiswrapper (mp_init:219): couldn't initialize device: C0000001
[   17.996560] ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001)
[   17.996577] ndiswrapper (mp_halt:262): device f33ea480 is not initialized - not halting
[   17.996583] ndiswrapper: device eth%d removed
[   17.996611] ndiswrapper 0000:00:08.0: PCI INT A disabled
[   17.996635] ndiswrapper: probe of 0000:00:08.0 failed with error -22
[   18.061089] usbcore: registered new interface driver ndiswrapper
[   18.081731] [drm] radeon defaulting to kernel modesetting.
[   18.081741] [drm] radeon kernel modesetting enabled.
[   18.082031] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   18.112815] [drm] initializing kernel modesetting (R300 0x1002:0x4144 0x1002:0x0002).
[   18.112867] [drm] register mmio base: 0xE5000000
[   18.112870] [drm] register mmio size: 65536
[   18.113165] agpgart-via 0000:00:00.0: AGP 2.0 bridge
[   18.113189] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
[   18.113251] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[   18.113261] radeon 0000:01:00.0: GTT: 64M 0xE0000000 - 0xE3FFFFFF
[   18.113268] [drm] Generation 1 PCI interface in multifunction mode
[   18.113271] [drm] Limiting VRAM to one aperture
[   18.113277] radeon 0000:01:00.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (128M used)
[   18.113302] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   18.113305] [drm] Driver supports precise vblank timestamp query.
[   18.113327] [drm] radeon: irq initialized.
[   18.113512] [drm] Detected VRAM RAM=128M, BAR=128M
[   18.113522] [drm] RAM width 256bits DDR
[   18.121695] [TTM] Zone  kernel: Available graphics memory: 443430 kiB.
[   18.121702] [TTM] Zone highmem: Available graphics memory: 513034 kiB.
[   18.121706] [TTM] Initializing pool allocator.
[   18.121769] [drm] radeon: 128M of VRAM memory ready
[   18.121773] [drm] radeon: 64M of GTT memory ready.
[   18.121848] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[   18.123233] radeon 0000:01:00.0: WB disabled
[   18.230942] [drm] Loading R300 Microcode
[   18.231796] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[   18.231807] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[   18.231815] VIA 82xx Audio 0000:00:11.5: VIA VLink IRQ fixup, from 9 to 11
[   18.231979] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[   18.648544] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[   18.701179] init: failsafe main process (650) killed by TERM signal
[   18.917384] type=1400 audit(1326101424.170:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=718 comm="apparmor_parser"
[   18.932951] type=1400 audit(1326101424.186:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=720 comm="apparmor_parser"
[   18.942764] type=1400 audit(1326101424.194:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=721 comm="apparmor_parser"
[   18.950966] type=1400 audit(1326101424.202:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=721 comm="apparmor_parser"
[   18.951415] type=1400 audit(1326101424.202:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=721 comm="apparmor_parser"
[   19.009642] type=1400 audit(1326101424.262:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=723 comm="apparmor_parser"
[   19.040829] type=1400 audit(1326101424.294:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=723 comm="apparmor_parser"
[   19.276756] ppdev: user-space parallel port driver
[   19.779520] init: apport pre-start process (796) terminated with status 1
[   19.842347] [drm] radeon: ring at 0x00000000E0001000
[   19.842376] [drm] ring test succeeded in 0 usecs
[   19.842769] [drm] radeon: ib pool ready.
[   19.842909] [drm] ib test succeeded in 0 usecs
[   19.862033] [drm] Radeon Display Connectors
[   19.862042] [drm] Connector 0:
[   19.862045] [drm]   VGA
[   19.862050] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[   19.862053] [drm]   Encoders:
[   19.862055] [drm]     CRT1: INTERNAL_DAC1
[   19.862058] [drm] Connector 1:
[   19.862060] [drm]   DVI-I
[   19.862062] [drm]   HPD1
[   19.862065] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[   19.862068] [drm]   Encoders:
[   19.862070] [drm]     CRT2: INTERNAL_DAC2
[   19.862073] [drm]     DFP1: INTERNAL_TMDS1
[   19.862075] [drm] Connector 2:
[   19.862077] [drm]   S-video
[   19.862079] [drm]   Encoders:
[   19.862081] [drm]     TV1: INTERNAL_DAC2
[   19.929181] init: apport post-stop process (840) terminated with status 1
[   19.942072] Bluetooth: Core ver 2.16
[   19.944733] NET: Registered protocol family 31
[   19.944740] Bluetooth: HCI device and connection manager initialized
[   19.944746] Bluetooth: HCI socket layer initialized
[   19.944749] Bluetooth: L2CAP socket layer initialized
[   19.950786] Bluetooth: SCO socket layer initialized
[   19.994333] Bluetooth: RFCOMM TTY layer initialized
[   19.994349] Bluetooth: RFCOMM socket layer initialized
[   19.994353] Bluetooth: RFCOMM ver 1.11
[   20.152842] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   20.152851] Bluetooth: BNEP filters: protocol multicast
[   20.377215] [drm] Radeon display connector VGA-1: Found valid EDID
[   20.399596] [drm] Radeon display connector DVI-I-1: No monitor connected or invalid EDID
[   20.555710] [drm] fb mappable at 0xD0040000
[   20.555718] [drm] vram apper at 0xD0000000
[   20.555721] [drm] size 5242880
[   20.555724] [drm] fb depth is 24
[   20.555726] [drm]    pitch is 5120
[   20.556731] fbcon: radeondrmfb (fb0) is primary device
[   20.559060] Console: switching to colour frame buffer device 160x64
[   20.559150] fb0: radeondrmfb frame buffer device
[   20.559153] drm: registered panic notifier
[   20.559174] [drm] Initialized radeon 2.10.0 20080528 for 0000:01:00.0 on minor 0
[   20.872519] init: gdm main process (957) killed by TERM signal
[   21.504186] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   25.065562] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
torsten@torsten-ubuntu:~$ ^C
torsten@torsten-ubuntu:~$ ^C
torsten@torsten-ubuntu:~$ 

Longli

(Themenstarter)

Anmeldungsdatum:
24. Dezember 2010

Beiträge: 28

Igendwie wird es nichts mit der "Version wenn funktioniert". ch habe jetzt einige Neustarts durchgeführt, aber die Kiste meint wohl für heute genug getan zu haben (letzte Verbindung vor 1 Stunde).

Den hier hätte ich noch zu bieten.

torsten@torsten-ubuntu:~$ dmesg | egrep 'ndis|wlan'
[   17.792401] ndiswrapper version 1.56 loaded (smp=yes, preempt=no)
[   17.921134] ndiswrapper: driver wg311v3 (NETGEAR,08/22/2005,3.2.1.3) loaded
[   17.921603] ndiswrapper 0000:00:08.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   17.975318] ndiswrapper: using IRQ 19
[   18.652585] ndiswrapper (mp_init:219): couldn't initialize device: C0000001
[   18.652598] ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001)
[   18.652616] ndiswrapper (mp_halt:262): device f33db480 is not initialized - not halting
[   18.652621] ndiswrapper: device eth%d removed
[   18.654368] ndiswrapper 0000:00:08.0: PCI INT A disabled
[   18.654408] ndiswrapper: probe of 0000:00:08.0 failed with error -22
[   18.713590] usbcore: registered new interface driver ndiswrapper
torsten@torsten-ubuntu:~$ 

Achso und ja, die Infos zum Erstellen eines neuen Beitrages habe ich gelesen, weiß aber trotzdem nicht mit welchen Informationen ich (aufgrund von geht- geht nicht) sonst noch dienen kann. Der Router ist eine Fritz Box, WPA 2 , SSID wird übertragen und das Macbook neben mir hat vollen Empfang, wie auch Ubuntu - wenn es denn geht.

elektronenblitz63

Avatar von elektronenblitz63

Anmeldungsdatum:
16. Januar 2007

Beiträge: 29307

Wohnort: NRW

Hallo,
siehe hier.

Alternativ Ndiswrapper 1.57 ⮷ (stable) manuell installieren und testen. Anleitung auch in WLAN/NdisWrapper (nur bis einschließlich Ubuntu 11.10 erforderlich).

Ndiswrapper Downloadarchiv auf sourceforge.net 🇬🇧

Manuelle Installation Ndiswrapper

Achtung!

Ndiswrapper und die Pakete aus den offiziellen Paketquellen sind unter Ubuntu 12.10 fehlerhaft und dürfen momentan nicht verwendet werden! Fehlerreport 1023645 mit Lösungsmöglichkeit.

Aktuell werden Installationspakete für Version 1.58rc1 über ein PPA angeboten. Dies ist die einfachste Lösung auch ohne bestehende Internetverbindung unter Ubuntu. Referenzartikel dazu.

Alternativ kann Version 1.58(rc1) gemäß nachfolgender Anleitung manuell nachinstalliert werden.

Achtung!

Ab Ubuntu 12.04 ist ndiswrapper in Version 1.57 bereits standardmässig in den Paketquellen enthalten und muss nicht manuell gebaut und installiert werden! Stattdessen kann bei Bedarf Version 1.58(rc1) verwendet werden.

Vorhandene ältere Version zuerst deinstallieren sofern zuvor installiert:

sudo apt-get remove --purge ndiswrapper-common ndiswrapper-utils-1.9     
sudo rm /lib/modules/$(uname -r)/kernel/ubuntu/ndiswrapper/ndiswrapper.ko 

Ab Ubuntu 11.10 zusätzlich folgendes Paket entfernen:

sudo apt-get remove --purge ndiswrapper-dkms 

Ndiswrapper 1.57 installieren

(bis einschließlich Ubuntu 11.10!)

sudo apt-get install --reinstall linux-headers-generic linux-headers-$(uname -r) build-essential
wget http://downloads.sourceforge.net/project/ndiswrapper/stable/1.57/ndiswrapper-1.57.tar.gz
tar -xvf ndiswrapper-1.57.tar.gz
cd ndiswrapper-1.57
make
sudo make install
sudo depmod -a
sudo update-initramfs -u 

Ndiswrapper 1.58(rc1) installieren

(ab Ubuntu 12.04! - unter Ubuntu 12.10 momentan zwingend erforderlich / Stand Oktober 2012)

Version 1.58 ist inzwischen in stable angekommen. Man kann also zwei Varianten testen.

Stable:

sudo apt-get install --reinstall linux-headers-generic linux-headers-$(uname -r) build-essential
wget http://downloads.sourceforge.net/project/ndiswrapper/stable/ndiswrapper-1.58.tar.gz
tar -xvf ndiswrapper-1.58.tar.gz
cd ndiswrapper-1.58
make
sudo make install
sudo depmod -a && sudo update-initramfs -u 

RC-Version:

sudo apt-get install --reinstall linux-headers-generic linux-headers-$(uname -r) build-essential
wget http://sourceforge.net/projects/ndiswrapper/files/testing/ndiswrapper-1.58rc1.tar.gz
tar -xvf ndiswrapper-1.58rc1.tar.gz
cd ndiswrapper-1.58rc1
make
sudo make install
sudo depmod -a && sudo update-initramfs -u 

Prüfen:

modinfo ndiswrapper
ndiswrapper -l 

Version 1.57 bzw. 1.58(rc1) muss angezeigt werden. Wenn ja, Treiber über Terminal installieren falls noch nicht geschehen.

Achtung!

Das grafische Tool zu Ndiswrapper, ndisgtk, aus den Repos darf ebenfalls nicht nachinstalliert werden, da ansonsten wieder die fehlerhaften abhängigen Ndiswrapper-Pakete automatisch nachinstalliert werden!

Grafisches Frontend für Ndiswrapper

ndisgtk 0.8.5 manuell installieren

Download über launchpad.net.

sudo apt-get install intltool
wget launchpad.net/ndisgtk/0.8/0.8.5/+download/ndisgtk-0.8.5.tar.gz
tar xvf ndisgtk-0.8.5.tar.gz
cd ndisgtk-0.8.5
make
sudo make install
sudo cp *.png /usr/share/icons
sudo cp *.xpm /usr/share/icons 

Erforderliche Python-Pakete müssen ggf. noch nachinstalliert werden:

sudo apt-get install python python-glade2 python-gtk2 

Das Programm kann nun wie gewohnt über das Menü oder manuell über ...

gksu ndisgtk 

... gestartet werden.

Longli

(Themenstarter)

Anmeldungsdatum:
24. Dezember 2010

Beiträge: 28

Mach ich und vermelde das Ergebnis. Danke!

Longli

(Themenstarter)

Anmeldungsdatum:
24. Dezember 2010

Beiträge: 28

Alles so gemacht und bei mehreren Neustarts funktionierte es. Ich gehe mal davon aus, dass das Problem damit gelöst ist.

Vielen Dank euch allen!

elektronenblitz63

Avatar von elektronenblitz63

Anmeldungsdatum:
16. Januar 2007

Beiträge: 29307

Wohnort: NRW

Longli schrieb:

Alles so gemacht und bei mehreren Neustarts funktionierte es.

Welche Lösungsmöglichkeit wurde denn umgesetzt?

Longli

(Themenstarter)

Anmeldungsdatum:
24. Dezember 2010

Beiträge: 28

über Sudo (Codeblog von dir) die 1.56 deinstalliert, 1.57 installiert, geprüft - Version 1.57 wird angezeigt, Treiber neu installiert.

elektronenblitz63

Avatar von elektronenblitz63

Anmeldungsdatum:
16. Januar 2007

Beiträge: 29307

Wohnort: NRW

Danke, dann kann ich das entsprechend in die Anleitung einbauen.

Antworten |