Guten Abend zusammen. ☺
Ich versuche seit einiger Zeit, basierend auf "http://wiki.ubuntuusers.de/Soundkarten_konfigurieren/HDA" meinen
Dell Alienware M14x R2
unter
Ubuntu 14.04.LTS
dazu zu bringen, dass ich einen Sound über Kopfhörer bekomme. Problem: Es gehen nur die internen Lautsprecher. Ein Einstecken in die Buchsen wird gar nicht registriert, es erfolgt weder ein Ausschalten des Lautsprechertons, noch nicht mal eine Abgabe eines Sounds über die Kopfhörerbuchsen.
Laut der oben beschriebenen Anleitung wohnt in meinem Notebook folgender Chip Typ:
cat /proc/asound/cards 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xd2710000 irq 46 1 [NVidia ]: HDA-Intel - HDA NVidia HDA NVidia at 0xd1000000 irq 17
Laut der oben beschriebenen Anleitung wohnen in meinem Notebook folgende Codecs:
head -n 1 /proc/asound/card0/codec* /proc/asound/card0/codec#0 Codec: Creative CA0132 /proc/asound/card0/codec#3 Codec: Intel PantherPoint HDMI head -n 1 /proc/asound/card1/codec* Codec: Nvidia GPU 42 HDMI/DP
Jaaaa... Und ab da komm ich nicht mehr weiter.
die einzige "hda-Zeichenkette" findet sich in
zless /usr/share/doc/alsa-base/driver/ALSA-Configuration.txt.gz Module snd-hda-intel Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8, ICH9, ICH10, PCH, SCH), ATI SB450, SB600, R600, RS600, RS690, RS780, RV610, RV620, RV630, RV635, RV670, RV770, VIA VT8251/VT8237A, SIS966, ULI M5461 [Multiple options for each card instance] model - force the model name position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF) probe_mask - Bitmask to probe codecs (default = -1, meaning all slots) When the bit 8 (0x100) is set, the lower 8 bits are used as the "fixed" codec slots; i.e. the driver probes the slots regardless what hardware reports back probe_only - Only probing and no codec initialization (default=off); Useful to check the initial codec status for debugging bdl_pos_adj - Specifies the DMA IRQ timing delay in samples. Passing -1 will make the driver to choose the appropriate value based on the controller chip. patch - Specifies the early "patch" files to modify the HD-audio setup before initializing the codecs. This option is available only when CONFIG_SND_HDA_PATCH_LOADER=y is set. See HD-Audio.txt for details. beep_mode - Selects the beep registration mode (0=off, 1=on, 2= dynamic registration via mute switch on/off); the default value is set via CONFIG_SND_HDA_INPUT_BEEP_MODE kconfig. [Single (global) options] single_cmd - Use single immediate commands to communicate with codecs (for debugging only) enable_msi - Enable Message Signaled Interrupt (MSI) (default = off) power_save - Automatic power-saving timeout (in second, 0 = disable) power_save_controller - Reset HD-audio controller in power-saving mode (default = on) align_buffer_size - Force rounding of buffer/period sizes to multiples of 128 bytes. This is more efficient in terms of memory access but isn't required by the HDA spec and prevents users from specifying exact period/buffer sizes. (default = on) snoop - Enable/disable snooping (default = on) This module supports multiple cards and autoprobe.
Mehr gibt es nicht. Die alsa-base.conf würde ich ja gerne um meine Einstellung ergänzen, ich weiß aber nicht, welche korrekt wäre. Die im oben genannten Post ganz unten genannten Beispieleinträge für Dell helfen nicht weiter.
Ich würde mich freuen, wenn mir jemand ein bißchen Unterstützung und Hilfestellung geben könnte.
Liebe Grüße, Rainer
Bearbeitet von Developer92:
Zitatsyntax entfernt und durch passendere Codeblöcke ersetzt. Siehe auch Forum/Syntax