ubuntuusers.de

Hallo brauche nochmal eure Hilfe da mein SD Karten Slot nicht richtig läuft. Mit Ubuntu 14.04 lief der Slot ohne Probleme. Mein Laptop ist ein Samsung X20. Jetzt wird die SD Karte nicht mehr im Dateimanager im System erkannt.

enrico@enrico-SX20S:~$ lspci | grep Ricoh
03:09.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
03:09.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
03:09.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
03:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08)

enrico@enrico-SX20S:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV380/M24 [Mobility Radeon X600]
03:07.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
03:09.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
03:09.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
03:09.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
03:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08)
enrico@enrico-SX20S:~$ 

enrico@enrico-SX20S:~$ lsmod
Module                  Size  Used by
lib80211_crypt_ccmp    16384  2
nvram                  16384  0
video                  36864  0
msr                    16384  0
snd_intel8x0           36864  2
gpio_ich               16384  0
snd_ac97_codec        106496  1 snd_intel8x0
ac97_bus               16384  1 snd_ac97_codec
snd_pcm                94208  2 snd_ac97_codec,snd_intel8x0
joydev                 20480  0
input_leds             16384  0
mac_hid                16384  0
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
ipw2200               143360  0
serio_raw              16384  0
snd_rawmidi            28672  1 snd_seq_midi
libipw                 36864  1 ipw2200
snd_seq                57344  2 snd_seq_midi_event,snd_seq_midi
lpc_ich                20480  0
lib80211               16384  2 lib80211_crypt_ccmp,libipw
cfg80211              507904  2 libipw,ipw2200
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              32768  2 snd_pcm,snd_seq
pcmcia                 57344  0
r592                   20480  0
snd                    69632  11 snd_ac97_codec,snd_intel8x0,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_seq_device
memstick               16384  1 r592
yenta_socket           45056  0
soundcore              16384  1 snd
pcmcia_rsrc            20480  1 yenta_socket
pcmcia_core            24576  3 pcmcia,pcmcia_rsrc,yenta_socket
shpchp                 32768  0
binfmt_misc            20480  1
parport_pc             32768  0
ppdev                  20480  0
lp                     20480  0
parport                45056  3 lp,ppdev,parport_pc
autofs4                40960  2
pata_acpi              16384  0
radeon               1466368  2
i2c_algo_bit           16384  1 radeon
ttm                    90112  1 radeon
drm_kms_helper        131072  1 radeon
syscopyarea            16384  1 drm_kms_helper
firewire_ohci          36864  0
sysfillrect            16384  1 drm_kms_helper
sdhci_pci              24576  0
firewire_core          65536  1 firewire_ohci
sysimgblt              16384  1 drm_kms_helper
psmouse               118784  0
fb_sys_fops            16384  1 drm_kms_helper
sdhci                  45056  1 sdhci_pci
crc_itu_t              16384  1 firewire_core
drm                   311296  5 ttm,drm_kms_helper,radeon
enrico@enrico-SX20S:~$ 

enrico@enrico-SX20S:~$ lsmod | grep -i sdhci
sdhci_pci              24576  0
sdhci                  45056  1 sdhci_pci
enrico@enrico-SX20S:~$ 

Problem fast gelöst mit den Externen Usb Card Reader wird die SD karte jetzt erkannt.

enrico@enrico-SX20S:~$ lsusb
Bus 001 Device 013: ID 1307:0330 Transcend Information, Inc. 63-in-1 Multi-Card Reader/Writer

[    1.693038] NET: Registered protocol family 10
[    1.693432] NET: Registered protocol family 17
[    1.693456] Key type dns_resolver registered
[    1.693801] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[    1.693854] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.693871] Using IPI No-Shortcut mode
[    1.694103] registered taskstats version 1
[    1.694127] Loading compiled-in X.509 certificates
[    1.700069] Loaded X.509 cert 'Build time autogenerated kernel key: 4cd1953c9cec6af435e99004f991bb02a57e01f2'
[    1.700103] zswap: loaded using pool lzo/zbud
[    1.703423] Key type trusted registered
[    1.708869] Key type encrypted registered
[    1.708878] AppArmor: AppArmor sha1 policy hashing enabled
[    1.708883] ima: No TPM chip found, activating TPM-bypass!
[    1.708917] evm: HMAC attrs: 0x1
[    1.709245]   Magic number: 12:259:855
[    1.709360] rtc_cmos 00:06: setting system clock to 2016-04-30 21:49:06 UTC (1462052946)
[    1.709445] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.709447] EDD information not available.
[    1.709572] PM: Hibernation image not present or could not be loaded.
[    1.716910] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.846201] ata1.00: ATA-8: SAMSUNG HM160HC, LQ100-10, max UDMA/100
[    1.846205] ata1.00: 312581808 sectors, multi 16: LBA48 
[    1.846215] ata1.01: ATAPI: DV-W28E, S.0A, max UDMA/33
[    1.866087] ata1.00: configured for UDMA/100
[    1.870826] ata1.01: configured for UDMA/33
[    1.883437] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM160HC  0-10 PQ: 0 ANSI: 5
[    1.883750] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.883890] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.883953] sd 0:0:0:0: [sda] Write Protect is off
[    1.883958] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.883986] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.957770]  sda: sda1 sda2 < sda5 >
[    1.981172] scsi 0:0:1:0: CD-ROM            TEAC     DV-W28E          S.0A PQ: 0 ANSI: 5
[    2.120711] sr 0:0:1:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.120715] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.120838] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.120932] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    2.121101] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    2.121618] Freeing unused kernel memory: 944K (c1b8c000 - c1c78000)
[    2.121712] Write protecting the kernel text: 7832k
[    2.121759] Write protecting the kernel read-only data: 3212k
[    2.121761] NX-protecting the kernel data: 6504k
[    2.138279] random: udevadm urandom read with 12 bits of entropy available
[    2.180046] tsc: Refined TSC clocksource calibration: 1728.999 MHz
[    2.180055] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x18ec29adecf, max_idle_ns: 440795291333 ns
[    2.251933] sdhci: Secure Digital Host Controller Interface driver
[    2.251938] sdhci: Copyright(c) Pierre Ossman
[    2.316945] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[    2.318004] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[    2.361544] [drm] Initialized drm 1.1.0 20060810
[    2.422010] firewire_ohci 0000:03:09.1: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    2.422251] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[    2.423294] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[    2.551779] [drm] radeon kernel modesetting enabled.
[    2.551860] checking generic (d0000000 5a0000) vs hw (d0000000 8000000)
[    2.551863] fb: switching to radeondrmfb from VESA VGA
[    2.551916] Console: switching to colour dummy device 80x25
[    2.553475] [drm] initializing kernel modesetting (RV380 0x1002:0x3150 0x144D:0xC018).
[    2.553490] [drm] register mmio base: 0xC0100000
[    2.553492] [drm] register mmio size: 65536
[    2.553671] [drm] Generation 2 PCI interface, using max accessible memory
[    2.553680] radeon 0000:01:00.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (128M used)
[    2.553684] radeon 0000:01:00.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
[    2.554547] [drm] Detected VRAM RAM=128M, BAR=128M
[    2.554552] [drm] RAM width 128bits DDR
[    2.554675] [TTM] Zone  kernel: Available graphics memory: 439360 kiB
[    2.554677] [TTM] Zone highmem: Available graphics memory: 1030532 kiB
[    2.554679] [TTM] Initializing pool allocator
[    2.554689] [TTM] Initializing DMA pool allocator
[    2.554730] [drm] radeon: 128M of VRAM memory ready
[    2.554733] [drm] radeon: 512M of GTT memory ready.
[    2.554763] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    2.556048] [drm] Possible adm1032 thermal controller at 0x4c
[    2.556071] [drm] radeon: power management initialized
[    2.556095] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[    2.557107] [drm] PCIE GART of 512M enabled (table at 0x00000000D0040000).
[    2.557138] radeon 0000:01:00.0: WB enabled
[    2.557143] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xffc08000
[    2.557147] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.557149] [drm] Driver supports precise vblank timestamp query.
[    2.557152] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    2.557599] radeon 0000:01:00.0: radeon: using MSI.
[    2.557632] [drm] radeon: irq initialized.
[    2.557642] [drm] Loading R300 Microcode
[    2.557890] [drm] radeon: ring at 0x00000000B0001000
[    2.557913] [drm] ring test succeeded in 1 usecs
[    2.558101] [drm] ib test succeeded in 0 usecs
[    2.560127] [drm] Panel ID String: Samsung LTN150P1-L02    
[    2.560131] [drm] Panel Size 1400x1050
[    2.560752] [drm] Radeon Display Connectors
[    2.560755] [drm] Connector 0:
[    2.560756] [drm]   VGA-1
[    2.560760] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[    2.560762] [drm]   Encoders:
[    2.560763] [drm]     CRT1: INTERNAL_DAC1
[    2.560765] [drm] Connector 1:
[    2.560767] [drm]   DVI-D-1
[    2.560769] [drm]   HPD1
[    2.560771] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[    2.560773] [drm]   Encoders:
[    2.560774] [drm]     DFP1: INTERNAL_TMDS1
[    2.560776] [drm] Connector 2:
[    2.560778] [drm]   LVDS-1
[    2.560779] [drm]   Encoders:
[    2.560781] [drm]     LCD1: INTERNAL_LVDS
[    2.560782] [drm] Connector 3:
[    2.560784] [drm]   SVIDEO-1
[    2.560785] [drm]   Encoders:
[    2.560787] [drm]     TV1: INTERNAL_DAC2
[    2.614098] [drm] fb mappable at 0xD00C0000
[    2.614104] [drm] vram apper at 0xD0000000
[    2.614106] [drm] size 5914624
[    2.614107] [drm] fb depth is 24
[    2.614109] [drm]    pitch is 5632
[    2.614447] fbcon: radeondrmfb (fb0) is primary device
[    2.645934] Console: switching to colour frame buffer device 175x65
[    2.654921] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    2.654935] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[    2.654982] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[    2.656022] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[    2.920148] firewire_core 0000:03:09.1: created device fw0: GUID 0000f041200499fd, S400
[    3.180064] clocksource: Switched to clocksource tsc
[    3.187661] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.1, id: 0x2580b1, caps: 0xa04713/0x200000/0x0/0x0, board id: 0, fw id: 32440
[    3.222711] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[    3.226218] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[    3.227263] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[   33.896018] ata1: lost interrupt (Status 0x58)
[   33.900002] ata1: drained 65536 bytes to clear DRQ
[   33.987226] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[   33.987304] ata1.00: failed command: READ DMA EXT
[   33.987357] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
                        res 40/00:03:00:00:02/00:00:00:00:00/10 Emask 0x4 (timeout)
[   33.987497] ata1.00: status: { DRDY }
[   33.987563] ata1: soft resetting link
[   34.182073] ata1.00: configured for UDMA/100
[   34.248299] ata1.01: configured for UDMA/33
[   34.288833] ata1: EH complete
[   35.211532] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   35.388768] random: nonblocking pool is initialized
[   36.421477] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   36.421628] systemd[1]: Detected architecture x86.
[   36.437444] systemd[1]: Set hostname to <enrico-SX20S>.
[   37.258675] systemd[1]: Created slice System Slice.
[   37.258768] systemd[1]: Reached target Encrypted Volumes.
[   37.258816] systemd[1]: Listening on fsck to fsckd communication Socket.
[   37.258940] systemd[1]: Listening on Journal Audit Socket.
[   37.259106] systemd[1]: Created slice system-getty.slice.
[   37.259128] systemd[1]: Reached target Remote File Systems (Pre).
[   37.259147] systemd[1]: Reached target User and Group Name Lookups.
[   37.259201] systemd[1]: Listening on udev Control Socket.
[   37.259338] systemd[1]: Created slice User and Session Slice.
[   37.259403] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   37.259600] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   37.259656] systemd[1]: Listening on Syslog Socket.
[   37.259718] systemd[1]: Listening on Journal Socket.
[   37.260465] systemd[1]: Starting Nameserver information manager...
[   37.382431] systemd[1]: Mounting POSIX Message Queue File System...
[   37.383179] systemd[1]: Starting Uncomplicated firewall...
[   37.383226] systemd[1]: Reached target Slices.
[   37.383979] systemd[1]: Started Read required files in advance.
[   37.578398] systemd[1]: Starting Load Kernel Modules...
[   37.579162] systemd[1]: Starting Braille Device Support...
[   37.579195] systemd[1]: Reached target Remote File Systems.
[   37.579318] systemd[1]: Listening on Journal Socket (/dev/log).
[   37.580164] systemd[1]: Starting Journal Service...
[   37.581045] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   37.581848] systemd[1]: Mounting Huge Pages File System...
[   37.582683] systemd[1]: Mounting Debug File System...
[   37.582788] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   37.582883] systemd[1]: Listening on udev Kernel Socket.
[   37.926546] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   37.927552] systemd[1]: Starting Create Static Device Nodes in /dev...
[   37.980153] systemd[1]: Started Uncomplicated firewall.
[   38.355486] systemd[1]: Mounted Huge Pages File System.
[   38.355552] systemd[1]: Mounted POSIX Message Queue File System.
[   38.355583] systemd[1]: Mounted Debug File System.
[   38.643597] systemd[1]: Started Nameserver information manager.
[   38.655821] lp: driver loaded but no devices found
[   38.755449] ppdev: user-space parallel port driver
[   38.876372] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[   38.877417] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[   38.877612] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[   38.878637] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[   38.878806] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[   38.879831] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[   38.925802] systemd[1]: Started Load Kernel Modules.
[   38.926735] systemd[1]: Starting Apply Kernel Variables...
[   38.927638] systemd[1]: Mounting FUSE Control File System...
[   38.936310] systemd[1]: Mounted FUSE Control File System.
[   39.097055] systemd[1]: Started Journal Service.
[   40.527735] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   41.216120] systemd-journald[200]: Received request to flush runtime journal from PID 1
[   42.019932] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   42.220773] yenta_cardbus 0000:03:09.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[   42.220797] yenta_cardbus 0000:03:09.0: CardBus bridge found [144d:c018]
[   42.220824] yenta_cardbus 0000:03:09.0: no PCI IRQ, CardBus support disabled for this socket.
[   42.220827] yenta_cardbus 0000:03:09.0: check your BIOS CardBus, BIOS IRQ or ACPI settings.
[   42.348583] yenta_cardbus 0000:03:09.0: ISA IRQ mask 0x0298, PCI irq 0
[   42.348591] yenta_cardbus 0000:03:09.0: Socket status: 30000006
[   42.348599] yenta_cardbus 0000:03:09.0: pcmcia: parent PCI bridge window: [io  0x5000-0x5fff]
[   42.348603] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff:
[   42.349878]  excluding 0x5000-0x50ff 0x5400-0x54ff
[   42.355575] yenta_cardbus 0000:03:09.0: pcmcia: parent PCI bridge window: [mem 0xc8000000-0xc80fffff]
[   42.355580] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc8000000-0xc80fffff:
[   42.355584]  excluding 0xc8000000-0xc800ffff
[   42.362409] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[   42.363457] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[   42.481738] intel_rng: FWH not detected
[   42.486832] r592: driver successfully loaded
[   42.486879] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[   42.487908] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[   42.699493] lib80211: common routines for IEEE802.11 drivers
[   42.699500] lib80211_crypt: registered algorithm 'NULL'
[   42.798745] libipw: 802.11 data/management/control stack, git-1.1.13
[   42.798751] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   42.961006] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[   42.962050] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[   43.400510] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[   43.400516] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[   43.400659] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[   73.832021] ata1: lost interrupt (Status 0x58)
[   73.836002] ata1: drained 65536 bytes to clear DRQ
[   73.923206] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[   73.923284] ata1.00: failed command: READ DMA
[   73.923334] ata1.00: cmd c8/00:10:30:c8:0a/00:00:00:00:00/e7 tag 0 dma 8192 in
                        res 40/00:03:00:00:02/00:00:00:00:00/10 Emask 0x4 (timeout)
[   73.923473] ata1.00: status: { DRDY }
[   73.923540] ata1: soft resetting link
[   74.118075] ata1.00: configured for UDMA/100
[   74.184290] ata1.01: configured for UDMA/33
[   74.224838] ata1: EH complete
[   75.330821] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
[   75.330876] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[   75.331923] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[   75.395902] gpio_ich: GPIO from 462 to 511 on gpio_ich
[   75.395945] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[   75.396981] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[   75.750617] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[   75.751623]  excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[   75.752624] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[   75.752999]  excluding 0x3f0-0x3f7 0x4d0-0x4d7
[   75.753349] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[   75.753932]  clean
[   75.753949] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[   75.754592]  clean
[   75.754613] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   75.754621]  excluding 0xc0000-0xd3fff 0xdc000-0xfffff
[   75.754649] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   75.754671]  clean
[   75.754688] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   75.754702]  excluding 0x60000000-0x60ffffff
[   75.754721] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[   75.755383]  clean
[   75.855843] ipw2200 0000:03:07.0 wlp3s7: renamed from eth0
[   76.316028] snd_intel8x0 0000:00:1e.2: intel8x0_measure_ac97_clock: measured 55420 usecs (2670 samples)
[   76.316035] snd_intel8x0 0000:00:1e.2: clocking to 48000
[   76.317494] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[   76.318544] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[   77.137822] Adding 2094076k swap on /dev/sda5.  Priority:-1 extents:1 across:2094076k FS
[   81.004187] audit: type=1400 audit(1462053025.790:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=532 comm="apparmor_parser"
[   81.004200] audit: type=1400 audit(1462053025.790:3): apparmor="STATUS" operation="profile_load" name="chromium" pid=532 comm="apparmor_parser"
[   81.016211] audit: type=1400 audit(1462053025.802:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=534 comm="apparmor_parser"
[   81.016222] audit: type=1400 audit(1462053025.802:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=534 comm="apparmor_parser"
[   81.016230] audit: type=1400 audit(1462053025.802:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=534 comm="apparmor_parser"
[   81.016237] audit: type=1400 audit(1462053025.802:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=534 comm="apparmor_parser"
[   81.039471] audit: type=1400 audit(1462053025.826:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/ubuntu-core-launcher" pid=536 comm="apparmor_parser"
[   81.054653] audit: type=1400 audit(1462053025.838:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=537 comm="apparmor_parser"
[   81.061920] audit: type=1400 audit(1462053025.846:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=538 comm="apparmor_parser"
[   81.061931] audit: type=1400 audit(1462053025.846:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=538 comm="apparmor_parser"
[   91.128312] IPv6: ADDRCONF(NETDEV_UP): wlp3s7: link is not ready
[   94.666364] Non-volatile memory driver v1.3
[  111.905140] lib80211_crypt: registered algorithm 'CCMP'
[  155.880023] ata1: lost interrupt (Status 0x58)
[  155.884004] ata1: drained 65536 bytes to clear DRQ
[  155.971227] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  155.971233] ata1.00: failed command: READ DMA EXT
[  155.971241] ata1.00: cmd 25/00:18:c0:bc:d1/00:00:11:00:00/e0 tag 0 dma 12288 in
                        res 40/00:03:00:00:02/00:00:00:00:00/10 Emask 0x4 (timeout)
[  155.971245] ata1.00: status: { DRDY }
[  155.971277] ata1: soft resetting link
[  156.166075] ata1.00: configured for UDMA/100
[  156.232290] ata1.01: configured for UDMA/33
[  156.272856] ata1: EH complete
[  156.847694] show_signal_msg: 9 callbacks suppressed
[  156.847702] mate-power-mana[1349]: segfault at 0 ip b6c247ed sp bfcc8814 error 4 in libupower-glib.so.3.0.1[b6c17000+28000]
[  179.425954] mate-panel[1341]: segfault at 20 ip b6bfa8f9 sp bffb2ea0 error 4 in libglib-2.0.so.0.4800.0[b6b97000+127000]
[  204.724034] usb 1-2: new high-speed USB device number 2 using ehci-pci
[  204.885545] usb 1-2: New USB device found, idVendor=13fe, idProduct=5200
[  204.885549] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  204.885553] usb 1-2: Product: USB DISK 3.0
[  204.885556] usb 1-2: Manufacturer:         
[  204.885559] usb 1-2: SerialNumber: 070B4C1BAD21EE80
[  204.889206] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[  204.890269] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[  205.525441] usb-storage 1-2:1.0: USB Mass Storage device detected
[  205.526472] scsi host2: usb-storage 1-2:1.0
[  205.526624] usbcore: registered new interface driver usb-storage
[  205.527571] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[  205.528621] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[  205.550924] usbcore: registered new interface driver uas
[  206.524705] scsi 2:0:0:0: Direct-Access              USB DISK 3.0     PMAP PQ: 0 ANSI: 6
[  206.527614] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[  206.528666] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[  206.529630] sd 2:0:0:0: Attached scsi generic sg2 type 0
[  206.530069] sd 2:0:0:0: [sdb] 61767680 512-byte logical blocks: (31.6 GB/29.5 GiB)
[  206.531319] sd 2:0:0:0: [sdb] Write Protect is off
[  206.531324] sd 2:0:0:0: [sdb] Mode Sense: 2b 00 00 08
[  206.533079] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  206.633522]  sdb: sdb1
[  206.637615] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[  221.694112] usb 1-2: USB disconnect, device number 2
[  227.580017] usb 1-3: new high-speed USB device number 3 using ehci-pci
[  227.741556] usb 1-3: New USB device found, idVendor=13fe, idProduct=5200
[  227.741561] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  227.741564] usb 1-3: Product: USB DISK 3.0
[  227.741567] usb 1-3: Manufacturer:         
[  227.741570] usb 1-3: SerialNumber: 070B4C1BAD21EE80
[  227.745129] usb-storage 1-3:1.0: USB Mass Storage device detected
[  227.746070] scsi host3: usb-storage 1-3:1.0
[  227.748156] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[  227.749218] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[  228.744728] scsi 3:0:0:0: Direct-Access              USB DISK 3.0     PMAP PQ: 0 ANSI: 6
[  228.747642] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[  228.748699] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[  228.749650] sd 3:0:0:0: Attached scsi generic sg2 type 0
[  228.750087] sd 3:0:0:0: [sdb] 61767680 512-byte logical blocks: (31.6 GB/29.5 GiB)
[  228.751336] sd 3:0:0:0: [sdb] Write Protect is off
[  228.751342] sd 3:0:0:0: [sdb] Mode Sense: 2b 00 00 08
[  228.753098] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  228.853538]  sdb: sdb1
[  228.857640] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[  255.945642] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  288.705431] usb 1-3: USB disconnect, device number 3
[  290.956034] usb 1-3: new high-speed USB device number 4 using ehci-pci
[  291.117603] usb 1-3: New USB device found, idVendor=13fe, idProduct=5200
[  291.117607] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  291.117611] usb 1-3: Product: USB DISK 3.0
[  291.117614] usb 1-3: Manufacturer:         
[  291.117617] usb 1-3: SerialNumber: 070B4C1BAD21EE80
[  291.121187] usb-storage 1-3:1.0: USB Mass Storage device detected
[  291.122068] scsi host4: usb-storage 1-3:1.0
[  291.124162] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[  291.125212] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[  292.120682] scsi 4:0:0:0: Direct-Access              USB DISK 3.0     PMAP PQ: 0 ANSI: 6
[  292.123682] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[  292.124733] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[  292.125696] sd 4:0:0:0: Attached scsi generic sg2 type 0
[  292.126167] sd 4:0:0:0: [sdb] 61767680 512-byte logical blocks: (31.6 GB/29.5 GiB)
[  292.127413] sd 4:0:0:0: [sdb] Write Protect is off
[  292.127418] sd 4:0:0:0: [sdb] Mode Sense: 2b 00 00 08
[  292.129176] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  292.229616]  sdb: sdb1
[  292.233830] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[  292.450920] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  328.002573] usb 1-3: USB disconnect, device number 4
[  331.432026] usb 1-2: new high-speed USB device number 5 using ehci-pci
[  331.593572] usb 1-2: New USB device found, idVendor=13fe, idProduct=5200
[  331.593577] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  331.593581] usb 1-2: Product: USB DISK 3.0
[  331.593584] usb 1-2: Manufacturer:         
[  331.593587] usb 1-2: SerialNumber: 070B4C1BAD21EE80
[  331.597171] usb-storage 1-2:1.0: USB Mass Storage device detected
[  331.598163] scsi host5: usb-storage 1-2:1.0
[  331.600159] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[  331.601210] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[  332.596708] scsi 5:0:0:0: Direct-Access              USB DISK 3.0     PMAP PQ: 0 ANSI: 6
[  332.599674] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[  332.600726] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[  332.601702] sd 5:0:0:0: Attached scsi generic sg2 type 0
[  332.602191] sd 5:0:0:0: [sdb] 61767680 512-byte logical blocks: (31.6 GB/29.5 GiB)
[  332.603438] sd 5:0:0:0: [sdb] Write Protect is off
[  332.603444] sd 5:0:0:0: [sdb] Mode Sense: 2b 00 00 08
[  332.605201] sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  332.706128]  sdb: sdb1
[  332.710222] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[  332.977313] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  337.119306] usb 1-2: USB disconnect, device number 5
[  337.122798] sd 5:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[  337.122808] sd 5:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 4f 7c 42 00 00 f0 00
[  337.122812] blk_update_request: I/O error, dev sdb, sector 5209154
[  337.122841] sd 5:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[  337.122846] sd 5:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 4f 7d 32 00 00 10 00
[  337.122848] blk_update_request: I/O error, dev sdb, sector 5209394
enrico@enrico-SX20S:~$ 

In der Meldung von dmesg steht, dass ein Medium nicht "sicher entfernt" wurde und ein Dateisystemcheck notwendig ist.

Ob das die Karte ist kannst aber nur du wissen, da wir von dir keine verwertbaren Angaben über angeschlossene Geräte haben.

tomtomtom schrieb:

In der Meldung von dmesg steht, dass ein Medium nicht "sicher entfernt" wurde und ein Dateisystemcheck notwendig ist.

Ob das die Karte ist kannst aber nur du wissen, da wir von dir keine verwertbaren Angaben über angeschlossene Geräte haben.

Ok dann werde ich die Karte mal neu Formatieren. Ist so oder so nix mehr an Daten drauf. Wenn diese dann noch nicht geht was für ein Befehl fehlt euch noch? Mit dem Externen Usb Stick läuft die Karte ja. Allerdings muss ich mich An und wieder Abmelden bevor diese Angezeigt wird.

DPITTI schrieb:

Ok dann werde ich die Karte mal neu Formatieren.

Genau. Ein Dateisystemcheck ist ja ein ganzer Befehl, nur nicht überfordern.

Wenn diese dann noch nicht geht was für ein Befehl fehlt euch noch?

Ein vollständiges

lsusb

und ein

sudo parted --list

oder wahlweise

sudo fdisk --list

zum Beispiel.

Mit dem Externen Usb Stick läuft die Karte ja. Allerdings muss ich mich An und wieder Abmelden bevor diese Angezeigt wird.

Das Lesegerät an sich ändert nichts an dem "nicht sicher entfernt" - so es denn der Stick ist.

tomtomtom schrieb:

DPITTI schrieb:

Ok dann werde ich die Karte mal neu Formatieren.

Genau. Ein Dateisystemcheck ist ja ein ganzer Befehl, nur nicht überfordern.

Wenn diese dann noch nicht geht was für ein Befehl fehlt euch noch?

Ein vollständiges

lsusb

und ein

sudo parted --list

oder wahlweise

sudo fdisk --list

zum Beispiel.

Mit dem Externen Usb Stick läuft die Karte ja. Allerdings muss ich mich An und wieder Abmelden bevor diese Angezeigt wird.

Das Lesegerät an sich ändert nichts an dem "nicht sicher entfernt" - so es denn der Stick ist.

Bitte hier das gewünschte. Die SD Karte wird noch nicht vom Internen SD Karten Slot erkannt. Diese Karte mit 32 GB ist aber Nagelneu! Und das andere wo Du schriebst war ein USB Stick den habe ich einmal nicht Aus gehangen und so abgezogen nicht diese Karte.Habe auch das so Eingestellt das jetzt Dateisystem Fehler Automatisch beseitigt werden. Also im Editor

FSCKFIX=yes

von no auf yes.

enrico@enrico-SX20S:~$ lsusb
Bus 001 Device 002: ID 1307:0330 Transcend Information, Inc. 63-in-1 Multi-Card Reader/Writer
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

enrico@enrico-SX20S:~$ sudo parted --list
[sudo] Passwort für enrico: 
Modell: ATA SAMSUNG HM160HC (scsi)
Festplatte  /dev/sda:  160GB
Sektorgröße (logisch/physisch): 512B/512B
Partitionstabelle: msdos
Disk-Flags: 

Nummer  Anfang  Ende   Größe   Typ       Dateisystem     Flags
 1      1049kB  158GB  158GB   primary   ext4            boot
 2      158GB   160GB  2144MB  extended
 5      158GB   160GB  2144MB  logical   linux-swap(v1)


Modell: Generic USB SD Reader (scsi)
Festplatte  /dev/sdc:  31,9GB
Sektorgröße (logisch/physisch): 512B/512B
Partitionstabelle: loop
Disk-Flags: 

Nummer  Anfang  Ende    Größe   Dateisystem  Flags
 1      0,00B   31,9GB  31,9GB  fat32

enrico@enrico-SX20S:~$ sudo fdisk --list
Medium /dev/ram0: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram1: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram2: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram3: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram4: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram5: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram6: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram7: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram8: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram9: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram10: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram11: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram12: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram13: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram14: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram15: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/sda: 149,1 GiB, 160041885696 Bytes, 312581808 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 512 Bytes
I/O Größe (minimal/optimal): 512 Bytes / 512 Bytes
Typ der Medienbezeichnung: dos
Medienkennung: 0x5c4e8139

Gerät      Boot     Start      Ende  Sektoren Größe Id Typ
/dev/sda1  *         2048 308389887 308387840 147,1G 83 Linux
/dev/sda2       308391934 312580095   4188162     2G  5 Erweiterte
/dev/sda5       308391936 312580095   4188160     2G 82 Linux Swap / Solaris




Medium /dev/sdc: 29,7 GiB, 31914983424 Bytes, 62333952 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 512 Bytes
I/O Größe (minimal/optimal): 512 Bytes / 512 Bytes
Typ der Medienbezeichnung: dos
Medienkennung: 0x00000000

enrico@enrico-SX20S:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV380/M24 [Mobility Radeon X600]
03:07.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
03:09.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
03:09.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
03:09.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
03:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08)
enrico@enrico-SX20S:~$ 

Ja, dann kam die Meldung von dem externen Leser. Interessant wäre aber die dmesg-Ausgabe wenn die Karte im internen liegt, denn der macht ja die Probleme.

tomtomtom schrieb:

Ja, dann kam die Meldung von dem externen Leser. Interessant wäre aber die dmesg-Ausgabe wenn die Karte im internen liegt, denn der macht ja die Probleme.

Hier die dmesg Ausgabe. Ja irgendwas stand vorhin im Recover Modus vom SD Slot mit DMA Modus.Habe das mit der Auto Dateisystem Prüfung wieder auf No gestellt. Der Rechner fuhr nicht hoch.Jetz ja aber dauert irgendwie zu lange.Karte ist immer im SD Slot vom Laptop.

[    1.201110] io scheduler noop registered
[    1.201114] io scheduler deadline registered (default)
[    1.201178] io scheduler cfq registered
[    1.201676] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    1.201681] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.201685] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    1.201720] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    1.201726] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    1.201739] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.201759] pciehp 0000:00:1c.0:pcie04: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep-
[    1.201796] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[    1.201807] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.201872] vesafb: mode is 1400x1050x32, linelength=5600, pages=0
[    1.201874] vesafb: scrolling: redraw
[    1.201878] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    1.201905] vesafb: framebuffer at 0xd0000000, mapped to 0xf8600000, using 5760k, total 5760k
[    1.280910] Console: switching to colour frame buffer device 175x65
[    1.358941] fb0: VESA VGA frame buffer device
[    1.358974] intel_idle: does not run on family 6 model 13
[    1.359110] isapnp: Scanning for PnP cards...
[    1.669653] isapnp: No Plug & Play device found
[    1.669811] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.672929] Linux agpgart interface v0.103
[    1.678245] brd: module loaded
[    1.680674] loop: module loaded
[    1.680967] ata_piix 0000:00:1f.1: version 2.13
[    1.681649] scsi host0: ata_piix
[    1.681798] scsi host1: ata_piix
[    1.681889] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18c0 irq 14
[    1.681892] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18c8 irq 15
[    1.682062] libphy: Fixed MDIO Bus: probed
[    1.682067] tun: Universal TUN/TAP device driver, 1.6
[    1.682069] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.682310] PPP generic driver version 2.4.2
[    1.682425] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.682434] ehci-pci: EHCI PCI platform driver
[    1.682497] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.682508] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.682527] ehci-pci 0000:00:1d.7: debug port 1
[    1.686462] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    1.686491] ehci-pci 0000:00:1d.7: irq 5, io mem 0xc0000000
[    1.686538] ata2: port disabled--ignoring
[    1.696021] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.696097] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.696101] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.696104] usb usb1: Product: EHCI Host Controller
[    1.696108] usb usb1: Manufacturer: Linux 4.5.0-040500-generic ehci_hcd
[    1.696110] usb usb1: SerialNumber: 0000:00:1d.7
[    1.696323] hub 1-0:1.0: USB hub found
[    1.696336] hub 1-0:1.0: 8 ports detected
[    1.696707] ehci-platform: EHCI generic platform driver
[    1.696725] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.696736] ohci-pci: OHCI PCI platform driver
[    1.696759] ohci-platform: OHCI generic platform driver
[    1.696774] uhci_hcd: USB Universal Host Controller Interface driver
[    1.696814] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.696823] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.696832] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.696854] uhci_hcd 0000:00:1d.0: irq 5, io base 0x00001800
[    1.696931] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.696934] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.696937] usb usb2: Product: UHCI Host Controller
[    1.696940] usb usb2: Manufacturer: Linux 4.5.0-040500-generic uhci_hcd
[    1.696943] usb usb2: SerialNumber: 0000:00:1d.0
[    1.697132] hub 2-0:1.0: USB hub found
[    1.697143] hub 2-0:1.0: 2 ports detected
[    1.697323] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.697331] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.697340] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.697362] uhci_hcd 0000:00:1d.1: irq 5, io base 0x00001820
[    1.697434] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.697437] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.697440] usb usb3: Product: UHCI Host Controller
[    1.697443] usb usb3: Manufacturer: Linux 4.5.0-040500-generic uhci_hcd
[    1.697446] usb usb3: SerialNumber: 0000:00:1d.1
[    1.697629] hub 3-0:1.0: USB hub found
[    1.697639] hub 3-0:1.0: 2 ports detected
[    1.697813] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.697821] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.697828] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.697850] uhci_hcd 0000:00:1d.2: irq 5, io base 0x00001840
[    1.697920] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.697923] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.697926] usb usb4: Product: UHCI Host Controller
[    1.697929] usb usb4: Manufacturer: Linux 4.5.0-040500-generic uhci_hcd
[    1.697932] usb usb4: SerialNumber: 0000:00:1d.2
[    1.698117] hub 4-0:1.0: USB hub found
[    1.698129] hub 4-0:1.0: 2 ports detected
[    1.698309] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.698316] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.698326] uhci_hcd 0000:00:1d.3: detected 2 ports
[    1.698351] uhci_hcd 0000:00:1d.3: irq 11, io base 0x00001860
[    1.698421] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.698424] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.698427] usb usb5: Product: UHCI Host Controller
[    1.698430] usb usb5: Manufacturer: Linux 4.5.0-040500-generic uhci_hcd
[    1.698433] usb usb5: SerialNumber: 0000:00:1d.3
[    1.698613] hub 5-0:1.0: USB hub found
[    1.698624] hub 5-0:1.0: 2 ports detected
[    1.698924] i8042: PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[    1.701987] i8042: Detected active multiplexing controller, rev 1.1
[    1.703399] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.703406] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.703475] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.703536] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.703603] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.703839] mousedev: PS/2 mouse device common for all mice
[    1.704122] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.704152] rtc_cmos 00:06: alarms up to one day, 114 bytes nvram, hpet irqs
[    1.704169] i2c /dev entries driver
[    1.704282] device-mapper: uevent: version 1.0.3
[    1.704407] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.704451] platform eisa.0: Probing EISA bus 0
[    1.704461] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.704465] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.704468] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.704472] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.704475] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.704493] platform eisa.0: EISA: Detected 0 cards
[    1.704520] cpufreq-nforce2: No nForce2 chipset.
[    1.704532] ledtrig-cpu: registered to indicate activity on CPUs
[    1.705032] NET: Registered protocol family 10
[    1.705428] NET: Registered protocol family 17
[    1.705452] Key type dns_resolver registered
[    1.705794] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[    1.705847] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.705864] Using IPI No-Shortcut mode
[    1.706095] registered taskstats version 1
[    1.706118] Loading compiled-in X.509 certificates
[    1.712063] Loaded X.509 cert 'Build time autogenerated kernel key: 4cd1953c9cec6af435e99004f991bb02a57e01f2'
[    1.712097] zswap: loaded using pool lzo/zbud
[    1.715410] Key type trusted registered
[    1.720887] Key type encrypted registered
[    1.720896] AppArmor: AppArmor sha1 policy hashing enabled
[    1.720902] ima: No TPM chip found, activating TPM-bypass!
[    1.720934] evm: HMAC attrs: 0x1
[    1.721262]   Magic number: 0:702:92
[    1.721336]  container: hash matches
[    1.721381] rtc_cmos 00:06: setting system clock to 2016-05-01 20:05:11 UTC (1462133111)
[    1.721466] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.721468] EDD information not available.
[    1.721593] PM: Hibernation image not present or could not be loaded.
[    1.729005] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.858201] ata1.00: ATA-8: SAMSUNG HM160HC, LQ100-10, max UDMA/100
[    1.858205] ata1.00: 312581808 sectors, multi 16: LBA48 
[    1.858214] ata1.01: ATAPI: DV-W28E, S.0A, max UDMA/33
[    1.878085] ata1.00: configured for UDMA/100
[    1.882823] ata1.01: configured for UDMA/33
[    1.895297] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM160HC  0-10 PQ: 0 ANSI: 5
[    1.895611] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.895749] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.895812] sd 0:0:0:0: [sda] Write Protect is off
[    1.895816] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.895845] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.968013]  sda: sda1 sda2 < sda5 >
[    1.991394] scsi 0:0:1:0: CD-ROM            TEAC     DV-W28E          S.0A PQ: 0 ANSI: 5
[    2.128695] sr 0:0:1:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.128699] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.128836] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.128930] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    2.129100] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    2.129617] Freeing unused kernel memory: 944K (c1b8c000 - c1c78000)
[    2.129713] Write protecting the kernel text: 7832k
[    2.129759] Write protecting the kernel read-only data: 3212k
[    2.129761] NX-protecting the kernel data: 6504k
[    2.146479] random: udevadm urandom read with 13 bits of entropy available
[    2.192057] tsc: Refined TSC clocksource calibration: 1728.999 MHz
[    2.192066] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x18ec29adecf, max_idle_ns: 440795291333 ns
[    2.277967] sdhci: Secure Digital Host Controller Interface driver
[    2.277973] sdhci: Copyright(c) Pierre Ossman
[    2.334962] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[    2.336037] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[    2.372615] [drm] Initialized drm 1.1.0 20060810
[    2.437934] firewire_ohci 0000:03:09.1: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    2.438022] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[    2.439064] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[    2.560985] [drm] radeon kernel modesetting enabled.
[    2.561067] checking generic (d0000000 5a0000) vs hw (d0000000 8000000)
[    2.561070] fb: switching to radeondrmfb from VESA VGA
[    2.561118] Console: switching to colour dummy device 80x25
[    2.562385] [drm] initializing kernel modesetting (RV380 0x1002:0x3150 0x144D:0xC018).
[    2.562400] [drm] register mmio base: 0xC0100000
[    2.562402] [drm] register mmio size: 65536
[    2.562582] [drm] Generation 2 PCI interface, using max accessible memory
[    2.562590] radeon 0000:01:00.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (128M used)
[    2.562594] radeon 0000:01:00.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
[    2.563662] [drm] Detected VRAM RAM=128M, BAR=128M
[    2.563667] [drm] RAM width 128bits DDR
[    2.563780] [TTM] Zone  kernel: Available graphics memory: 439360 kiB
[    2.563782] [TTM] Zone highmem: Available graphics memory: 1030532 kiB
[    2.563784] [TTM] Initializing pool allocator
[    2.563794] [TTM] Initializing DMA pool allocator
[    2.563835] [drm] radeon: 128M of VRAM memory ready
[    2.563838] [drm] radeon: 512M of GTT memory ready.
[    2.563868] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    2.564949] [drm] Possible adm1032 thermal controller at 0x4c
[    2.564958] [drm] radeon: power management initialized
[    2.564986] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[    2.566023] [drm] PCIE GART of 512M enabled (table at 0x00000000D0040000).
[    2.566234] radeon 0000:01:00.0: WB enabled
[    2.566240] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xffc0b000
[    2.566244] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.566246] [drm] Driver supports precise vblank timestamp query.
[    2.566249] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    2.566297] radeon 0000:01:00.0: radeon: using MSI.
[    2.566330] [drm] radeon: irq initialized.
[    2.566340] [drm] Loading R300 Microcode
[    2.566580] [drm] radeon: ring at 0x00000000B0001000
[    2.566603] [drm] ring test succeeded in 1 usecs
[    2.566792] [drm] ib test succeeded in 0 usecs
[    2.568811] [drm] Panel ID String: Samsung LTN150P1-L02    
[    2.568816] [drm] Panel Size 1400x1050
[    2.569422] [drm] Radeon Display Connectors
[    2.569425] [drm] Connector 0:
[    2.569426] [drm]   VGA-1
[    2.569430] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[    2.569431] [drm]   Encoders:
[    2.569433] [drm]     CRT1: INTERNAL_DAC1
[    2.569435] [drm] Connector 1:
[    2.569437] [drm]   DVI-D-1
[    2.569439] [drm]   HPD1
[    2.569441] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[    2.569443] [drm]   Encoders:
[    2.569445] [drm]     DFP1: INTERNAL_TMDS1
[    2.569446] [drm] Connector 2:
[    2.569448] [drm]   LVDS-1
[    2.569449] [drm]   Encoders:
[    2.569451] [drm]     LCD1: INTERNAL_LVDS
[    2.569452] [drm] Connector 3:
[    2.569454] [drm]   SVIDEO-1
[    2.569455] [drm]   Encoders:
[    2.569457] [drm]     TV1: INTERNAL_DAC2
[    2.622944] [drm] fb mappable at 0xD00C0000
[    2.622949] [drm] vram apper at 0xD0000000
[    2.622951] [drm] size 5914624
[    2.622952] [drm] fb depth is 24
[    2.622954] [drm]    pitch is 5632
[    2.623230] fbcon: radeondrmfb (fb0) is primary device
[    2.654598] Console: switching to colour frame buffer device 175x65
[    2.663569] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    2.663583] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[    2.663630] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[    2.664669] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[    2.936141] firewire_core 0000:03:09.1: created device fw0: GUID 0000f041200499fd, S400
[    3.160142] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.1, id: 0x2580b1, caps: 0xa04713/0x200000/0x0/0x0, board id: 0, fw id: 32440
[    3.192175] clocksource: Switched to clocksource tsc
[    3.194390] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[    3.197659] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[    3.198704] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[   33.896019] ata1: lost interrupt (Status 0x58)
[   33.900002] ata1: drained 65536 bytes to clear DRQ
[   33.986940] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[   33.987019] ata1.00: failed command: READ DMA EXT
[   33.987071] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
                        res 40/00:03:00:00:02/00:00:00:00:00/10 Emask 0x4 (timeout)
[   33.987212] ata1.00: status: { DRDY }
[   33.987278] ata1: soft resetting link
[   34.182071] ata1.00: configured for UDMA/100
[   34.248298] ata1.01: configured for UDMA/33
[   34.288833] ata1: EH complete
[   35.288086] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   35.416703] random: nonblocking pool is initialized
[   36.497748] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   36.497900] systemd[1]: Detected architecture x86.
[   36.513741] systemd[1]: Set hostname to <enrico-SX20S>.
[   37.380109] systemd[1]: Listening on udev Control Socket.
[   37.380264] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   37.380286] systemd[1]: Reached target Encrypted Volumes.
[   37.380307] systemd[1]: Reached target Remote File Systems (Pre).
[   37.380343] systemd[1]: Listening on fsck to fsckd communication Socket.
[   37.380389] systemd[1]: Listening on Syslog Socket.
[   37.380584] systemd[1]: Created slice User and Session Slice.
[   37.380638] systemd[1]: Listening on Journal Socket (/dev/log).
[   37.380696] systemd[1]: Listening on Journal Socket.
[   37.380910] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   37.380934] systemd[1]: Reached target User and Group Name Lookups.
[   37.380976] systemd[1]: Listening on udev Kernel Socket.
[   37.380998] systemd[1]: Reached target Remote File Systems.
[   37.381047] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   37.381201] systemd[1]: Created slice System Slice.
[   37.381232] systemd[1]: Reached target Slices.
[   37.381964] systemd[1]: Starting Uncomplicated firewall...
[   37.382686] systemd[1]: Starting Nameserver information manager...
[   37.502923] systemd[1]: Started Read required files in advance.
[   37.504890] systemd[1]: Starting Braille Device Support...
[   37.505686] systemd[1]: Mounting Huge Pages File System...
[   37.505930] systemd[1]: Created slice system-getty.slice.
[   37.506719] systemd[1]: Mounting POSIX Message Queue File System...
[   37.743403] systemd[1]: Starting Load Kernel Modules...
[   37.744322] systemd[1]: Mounting Debug File System...
[   37.744508] systemd[1]: Listening on Journal Audit Socket.
[   37.745421] systemd[1]: Starting Journal Service...
[   37.746299] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   37.879970] systemd[1]: Started Uncomplicated firewall.
[   38.079979] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   38.081006] systemd[1]: Starting Create Static Device Nodes in /dev...
[   38.386694] systemd[1]: Mounted Huge Pages File System.
[   38.386754] systemd[1]: Mounted POSIX Message Queue File System.
[   38.386786] systemd[1]: Mounted Debug File System.
[   38.523855] systemd[1]: Started Nameserver information manager.
[   38.853349] lp: driver loaded but no devices found
[   38.941974] ppdev: user-space parallel port driver
[   39.018754] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[   39.019799] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[   39.019998] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[   39.021050] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[   39.021221] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[   39.022245] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[   39.079285] systemd[1]: Started Load Kernel Modules.
[   39.080274] systemd[1]: Starting Apply Kernel Variables...
[   39.081070] systemd[1]: Mounting FUSE Control File System...
[   39.085851] systemd[1]: Mounted FUSE Control File System.
[   39.185417] systemd[1]: Started Journal Service.
[   40.548873] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   41.065983] systemd-journald[207]: Received request to flush runtime journal from PID 1
[   42.091037] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   42.257420] yenta_cardbus 0000:03:09.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[   42.257445] yenta_cardbus 0000:03:09.0: CardBus bridge found [144d:c018]
[   42.257472] yenta_cardbus 0000:03:09.0: no PCI IRQ, CardBus support disabled for this socket.
[   42.257475] yenta_cardbus 0000:03:09.0: check your BIOS CardBus, BIOS IRQ or ACPI settings.
[   42.384563] yenta_cardbus 0000:03:09.0: ISA IRQ mask 0x0298, PCI irq 0
[   42.384571] yenta_cardbus 0000:03:09.0: Socket status: 30000006
[   42.384579] yenta_cardbus 0000:03:09.0: pcmcia: parent PCI bridge window: [io  0x5000-0x5fff]
[   42.384583] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff:
[   42.386078]  excluding 0x5000-0x50ff 0x5400-0x54ff
[   42.391266] yenta_cardbus 0000:03:09.0: pcmcia: parent PCI bridge window: [mem 0xc8000000-0xc80fffff]
[   42.391271] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc8000000-0xc80fffff:
[   42.391275]  excluding 0xc8000000-0xc800ffff
[   42.394092] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[   42.395138] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[   42.463308] intel_rng: FWH not detected
[   42.602464] r592: driver successfully loaded
[   42.602513] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[   42.603544] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[   42.858902] lib80211: common routines for IEEE802.11 drivers
[   42.858908] lib80211_crypt: registered algorithm 'NULL'
[   42.867647] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[   42.868692] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[   42.984868] libipw: 802.11 data/management/control stack, git-1.1.13
[   42.984873] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   43.425279] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[   43.425285] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[   43.425437] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[   73.832021] ata1: lost interrupt (Status 0x58)
[   73.836002] ata1: drained 65536 bytes to clear DRQ
[   73.923011] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[   73.923089] ata1.00: failed command: READ DMA
[   73.923139] ata1.00: cmd c8/00:50:00:15:04/00:00:00:00:00/e8 tag 0 dma 40960 in
                        res 40/00:03:00:00:02/00:00:00:00:00/10 Emask 0x4 (timeout)
[   73.923277] ata1.00: status: { DRDY }
[   73.923345] ata1: soft resetting link
[   74.118071] ata1.00: configured for UDMA/100
[   74.184298] ata1.01: configured for UDMA/33
[   74.224826] ata1: EH complete
[   75.201209] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
[   75.201264] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[   75.202316] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[   75.530327] gpio_ich: GPIO from 462 to 511 on gpio_ich
[   75.530372] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[   75.531411] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[   75.674593] ipw2200 0000:03:07.0 wlp3s7: renamed from eth0
[   75.716501] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[   75.717593]  excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[   75.718331] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[   75.718704]  excluding 0x3f0-0x3f7 0x4d0-0x4d7
[   75.719054] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[   75.719634]  clean
[   75.719652] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[   75.721173]  clean
[   75.721201] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   75.721210]  excluding 0xc0000-0xd3fff 0xdc000-0xfffff
[   75.721240] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   75.721261]  clean
[   75.721279] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   75.721293]  excluding 0x60000000-0x60ffffff
[   75.721313] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[   75.721974]  clean
[   76.444145] snd_intel8x0 0000:00:1e.2: intel8x0_measure_ac97_clock: measured 55563 usecs (2677 samples)
[   76.444151] snd_intel8x0 0000:00:1e.2: clocking to 48000
[   76.445568] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[   76.446621] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[   76.833375] Adding 2094076k swap on /dev/sda5.  Priority:-1 extents:1 across:2094076k FS
[   80.917200] audit: type=1400 audit(1462133190.690:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=534 comm="apparmor_parser"
[   80.917214] audit: type=1400 audit(1462133190.690:3): apparmor="STATUS" operation="profile_load" name="chromium" pid=534 comm="apparmor_parser"
[   80.937797] audit: type=1400 audit(1462133190.710:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=535 comm="apparmor_parser"
[   80.937809] audit: type=1400 audit(1462133190.710:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=535 comm="apparmor_parser"
[   80.937816] audit: type=1400 audit(1462133190.710:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=535 comm="apparmor_parser"
[   80.937824] audit: type=1400 audit(1462133190.710:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=535 comm="apparmor_parser"
[   80.961187] audit: type=1400 audit(1462133190.738:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/ubuntu-core-launcher" pid=537 comm="apparmor_parser"
[   80.964683] audit: type=1400 audit(1462133190.738:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=538 comm="apparmor_parser"
[   80.972408] audit: type=1400 audit(1462133190.746:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=539 comm="apparmor_parser"
[   80.972419] audit: type=1400 audit(1462133190.746:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=539 comm="apparmor_parser"
[   94.832881] IPv6: ADDRCONF(NETDEV_UP): wlp3s7: link is not ready
[   98.777081] Non-volatile memory driver v1.3
[  125.944208] lib80211_crypt: registered algorithm 'CCMP'
[  165.221228] show_signal_msg: 9 callbacks suppressed
[  165.221236] mate-power-mana[1480]: segfault at 0 ip b6b917ed sp bfcaf224 error 4 in libupower-glib.so.3.0.1[b6b84000+28000]
[  170.856037] ata1: lost interrupt (Status 0x58)
[  170.860003] ata1: drained 65536 bytes to clear DRQ
[  170.947164] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  170.947170] ata1.00: failed command: READ DMA
[  170.947179] ata1.00: cmd c8/00:08:f8:09:41/00:00:00:00:00/e3 tag 0 dma 4096 in
                        res 40/00:03:00:00:02/00:00:00:00:00/10 Emask 0x4 (timeout)
[  170.947182] ata1.00: status: { DRDY }
[  170.947215] ata1: soft resetting link
[  171.142076] ata1.00: configured for UDMA/100
[  171.208301] ata1.01: configured for UDMA/33
[  171.248850] ata1: EH complete
enrico@enrico-SX20S:~$ 

Ich setze diesen Thread auf gelöst.System wird neu gemacht zur Not auch wieder Windows.

Nur mal noch als Idee: Laut dmesg erkennt das Lesegerät überhaupt nichts im Slot.

Das ist nicht zufällig eine SDXC-Karte? Bzw. kann das SD-Laufwerk überhaupt SDHC? Ansonsten würde mich bei dem Alter der Hardware auch kein Hardwareproblem überraschen.

tomtomtom schrieb:

Nur mal noch als Idee: Laut dmesg erkennt das Lesegerät überhaupt nichts im Slot.

Das ist nicht zufällig eine SDXC-Karte? Bzw. kann das SD-Laufwerk überhaupt SDHC? Ansonsten würde mich bei dem Alter der Hardware auch kein Hardwareproblem überraschen.

Ja habe eine SDHC Karte. Und ja das SD Slot Laufwerk lief sogar unter Windows1 ohne Probleme. Zwar nicht schnell aber ich konnte Daten Speichern.Ich lade mir jetzt Siduction 15.1.0 runter. Aber was der Hammer ist mit der 16.04 Beta Version wird die SD Karte Erkannt!!!

DPITTI schrieb:

Und ja das SD Slot Laufwerk lief sogar unter Windows1 ohne Probleme.

Möchte mal stark bezweifeln, dass du auf dem Gerät eine lauffähige Windows-1-Version installiert kriegst. 😛

Und laut Hersteller-Dokumentation kann das Gerät nicht mit SDHC-Karten umgehen.

Dann frage ich mich warum Windows 10 Ubuntu Mate 14.04 Die Beta mit Kernel 4.2.0.19 diese Karte lesen mit den im Laptop verbauten Slot? Ohne Witz habe für die alte Kiste noch ein Bois Update gefunden und auch Eingespielt.Warum sogar das alte Puppy Linix auf Ubuntu 10.4 Basis diese Karte erkennt sagt alles.Egal mach sonst eben ein Win oder Linux rauf und gut.

DPITTI schrieb:

Dann frage ich mich warum Windows 10 Ubuntu Mate 14.04 Die Beta mit Kernel 4.2.0.19 diese Karte lesen mit den im Laptop verbauten Slot?

Laut Hersteller kann das Gerät das nicht.

Ohne Witz habe für die alte Kiste noch ein Bois Update gefunden und auch Eingespielt.

Was auch immer ein BIOS-Update damit zu tun haben soll.

Ich setze hier mit Kubuntu 14.04 sämtliche Befehle rein sofern ich fertig bin. Dann musst Du mir Glauben das die SD Karte ok ist.Hier wird die Karte samt Slot vollständig erkannt ohne Probleme.Egal auch wenn ich jetzt etliches an Gigabyte nachladen muß. Hauptsache kann mit den Laptop arbeiten.Bin immer noch der Meinung an 16.04 wurde zu viel Kastriert. Da einige Pakete auch fehlen! Weshalb das Spiel Supertux 1 fehlt kann ich auch nicht verstehen.

Hier alles mit Kubuntu 14.04 selber Laptop mit erkannter SD Karte !!!

enrico@enrico-SX20S:~$ lspci | grep Ricoh
03:09.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
03:09.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
03:09.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
03:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08)
enrico@enrico-SX20S:~$ 

enrico@enrico-SX20S:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV380/M24 [Mobility Radeon X600]
03:07.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
03:09.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
03:09.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
03:09.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
03:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08)
enrico@enrico-SX20S:~$ 

enrico@enrico-SX20S:~$ lsmod
Module                  Size  Used by
mmc_block              31138  0 
lib80211_crypt_ccmp    12873  2 
bnep                   18895  2 
rfcomm                 53664  0 
bluetooth             342263  10 bnep,rfcomm
snd_intel8x0           33110  4 
snd_ac97_codec        105709  1 snd_intel8x0
ac97_bus               12642  1 snd_ac97_codec
snd_pcm                85501  2 snd_ac97_codec,snd_intel8x0
snd_page_alloc         14230  2 snd_intel8x0,snd_pcm
snd_seq_midi           13132  0 
snd_seq_midi_event     14475  1 snd_seq_midi
snd_rawmidi            25135  1 snd_seq_midi
joydev                 17101  0 
snd_seq                55383  2 snd_seq_midi_event,snd_seq_midi
ipw2200               136401  0 
libipw                 33144  1 ipw2200
snd_seq_device         14137  3 snd_seq,snd_rawmidi,snd_seq_midi
lib80211               14040  3 lib80211_crypt_ccmp,libipw,ipw2200
snd_timer              28584  2 snd_pcm,snd_seq
pcmcia                 51828  0 
cfg80211              409394  2 libipw,ipw2200
r592                   17711  0 
yenta_socket           40201  0 
snd                    60871  16 snd_ac97_codec,snd_intel8x0,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_seq_device,snd_seq_midi
memstick               16174  1 r592
pcmcia_rsrc            18319  1 yenta_socket
soundcore              12600  1 snd
psmouse                91033  0 
pcmcia_core            22328  3 pcmcia,pcmcia_rsrc,yenta_socket
serio_raw              13230  0 
lpc_ich                16864  0 
lm90                   19770  0 
mac_hid                13037  0 
parport_pc             31981  0 
ppdev                  17391  0 
lp                     13299  0 
parport                40836  3 lp,ppdev,parport_pc
radeon               1416373  3 
i2c_algo_bit           13197  1 radeon
ttm                    72698  1 radeon
firewire_ohci          35529  0 
drm_kms_helper         46907  1 radeon
firewire_core          61867  1 firewire_ohci
sdhci_pci              18535  0 
sdhci                  37779  1 sdhci_pci
drm                   243792  5 ttm,drm_kms_helper,radeon
crc_itu_t              12627  1 firewire_core
video                  18903  0 
enrico@enrico-SX20S:~$ 

enrico@enrico-SX20S:~$ lsmod | grep -i sdhci
sdhci_pci              18535  0 
sdhci                  37779  1 sdhci_pci
enrico@enrico-SX20S:~$ 

enrico@enrico-SX20S:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
enrico@enrico-SX20S:~$ 

enrico@enrico-SX20S:~$ dmesg 
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-24-generic (buildd@roseapple) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:08:14 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000d0000-0x00000000000d3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fe9ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007fea0000-0x000000007feb0fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007feb1000-0x000000007fefffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007ff00000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000f0005fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0008000-0x00000000f000bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: Samsung Electronics SX20S/SX20S, BIOS 12ZA 07/14/2006
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7fea0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E3FFF uncachable
[    0.000000]   E4000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07FF00000 mask FFFF00000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2047MB, range: 1MB, type UC
[    0.000000] total RAM covered: 2047M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 2M  num_reg: 2      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2047MB, range: 1MB, type UC
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[    0.000000]  [mem 0x37800000-0x379fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
[    0.000000]  [mem 0x34000000-0x377fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] BRK [0x01b88000, 0x01b88fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x34e04000-0x366f9fff]
[    0.000000] ACPI: RSDP 000f7730 000014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 7feaa995 000048 (v01 PTLTD  Ohlone00 06040000  LTP 00000000)
[    0.000000] ACPI: FACP 7feb0e96 000074 (v01 INTEL  ALVISO   06040000 LOHR 0000005F)
[    0.000000] ACPI: DSDT 7feab3b9 005ADD (v01 INTEL  ALVISO   06040000 INTL 20030224)
[    0.000000] ACPI: FACS 7feb1fc0 000040
[    0.000000] ACPI: APIC 7feb0f0a 00005A (v01 INTEL  ALVISO   06040000 LOHR 0000005F)
[    0.000000] ACPI: HPET 7feb0f64 000038 (v01 INTEL  ALVISO   06040000 LOHR 0000005F)
[    0.000000] ACPI: MCFG 7feb0f9c 00003C (v01 INTEL  ALVISO   06040000 LOHR 0000005F)
[    0.000000] ACPI: BOOT 7feb0fd8 000028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SSDT 7feab18b 00022E (v01 SataRe SataAhci 00001000 INTL 20030224)
[    0.000000] ACPI: SSDT 7feaac60 00031B (v01  PmRef  Cpu0Ist 00003000 INTL 20030224)
[    0.000000] ACPI: SSDT 7feaaaa6 0001BA (v01  PmRef  Cpu0Cst 00003001 INTL 20030224)
[    0.000000] ACPI: SSDT 7feaa9dd 0000C9 (v01  PmRef    CpuPm 00003000 INTL 20030224)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1154MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] BRK [0x01b89000, 0x01b89fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x37bfdfff]
[    0.000000]   HighMem  [mem 0x37bfe000-0x7fe9ffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x7fe9ffff]
[    0.000000] On node 0 totalpages: 523838
[    0.000000] free_area_init_node: node 0, pgdat c1990a80, node_mem_map f6bfe020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2310 pages used for memmap
[    0.000000]   HighMem zone: 295586 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000d0000-0x000d3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dbfff]
[    0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f6be4000 s36096 r0 d21248 u57344
[    0.000000] pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522054
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=a6499d75-48d2-41e7-8c59-bd14f21f37e5 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 4191480 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:0007fea0)
[    0.000000] Memory: 2036520K/2095352K available (6507K kernel code, 641K rwdata, 2752K rodata, 872K init, 924K bss, 58832K reserved, 1182344K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc19ae000 - 0xc1a88000   ( 872 kB)
[    0.000000]       .data : 0xc165b0b2 - 0xc19ad4c0   (3401 kB)
[    0.000000]       .text : 0xc1000000 - 0xc165b0b2   (6508 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f4808000 soft=f480a000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1729.130 MHz processor
[    0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.26 BogoMIPS (lpj=6916520)
[    0.004009] pid_max: default: 32768 minimum: 301
[    0.004051] Security Framework initialized
[    0.004080] AppArmor: AppArmor initialized
[    0.004083] Yama: becoming mindful.
[    0.004187] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.004191] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.004586] Initializing cgroup subsys memory
[    0.004599] Initializing cgroup subsys devices
[    0.004603] Initializing cgroup subsys freezer
[    0.004607] Initializing cgroup subsys blkio
[    0.004611] Initializing cgroup subsys perf_event
[    0.004615] Initializing cgroup subsys hugetlb
[    0.004654] Disabled fast string operations
[    0.004664] mce: CPU supports 5 MCE banks
[    0.004677] CPU0: Thermal monitoring enabled (TM2)
[    0.004693] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[    0.004693] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
[    0.004693] tlb_flushall_shift: 6
[    0.019540] Freeing SMP alternatives memory: 32K (c1a88000 - c1a90000)
[    0.021539] ACPI: Core revision 20131115
[    0.027481] ACPI: All ACPI Tables successfully acquired
[    0.028011] ftrace: allocating 27695 entries in 55 pages
[    0.040134] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.040587] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.082234] smpboot: CPU0: Intel(R) Pentium(R) M processor 1.73GHz (fam: 06, model: 0d, stepping: 08)
[    0.084000] Performance Events: p6 PMU driver.
[    0.084000] ... version:                0
[    0.084000] ... bit width:              32
[    0.084000] ... generic registers:      2
[    0.084000] ... value mask:             00000000ffffffff
[    0.084000] ... max period:             000000007fffffff
[    0.084000] ... fixed-purpose events:   0
[    0.084000] ... event mask:             0000000000000003
[    0.086231] x86: Booted up 1 node, 1 CPUs
[    0.086235] smpboot: Total of 1 processors activated (3458.26 BogoMIPS)
[    0.087281] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.087552] devtmpfs: initialized
[    0.087865] EVM: security.selinux
[    0.087867] EVM: security.SMACK64
[    0.087869] EVM: security.ima
[    0.087871] EVM: security.capability
[    0.088019] PM: Registering ACPI NVS region [mem 0x7feb1000-0x7fefffff] (323584 bytes)
[    0.089869] pinctrl core: initialized pinctrl subsystem
[    0.089975] regulator-dummy: no parameters
[    0.090018] RTC time: 20:57:59, date: 05/03/16
[    0.090076] NET: Registered protocol family 16
[    0.090318] EISA bus registered
[    0.090322] cpuidle: using governor ladder
[    0.090324] cpuidle: using governor menu
[    0.090439] ACPI: bus type PCI registered
[    0.090443] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.090544] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.090548] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.090550] PCI: Using MMCONFIG for extended config space
[    0.090553] PCI: Using configuration type 1 for base access
[    0.090556] Samsung X20 Laptop detected: enabling PCI bus# renumbering (pci=assign-busses)
[    0.092357] bio: create slab <bio-0> at 0
[    0.092566] ACPI: Added _OSI(Module Device)
[    0.092569] ACPI: Added _OSI(Processor Device)
[    0.092571] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.092574] ACPI: Added _OSI(Processor Aggregator Device)
[    0.097540] ACPI: Interpreter enabled
[    0.097540] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.097540] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.097540] ACPI: (supports S0 S3 S4 S5)
[    0.097540] ACPI: Using IOAPIC for interrupt routing
[    0.097540] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.097540] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.105592] ACPI: Power Resource [CFAN] (on)
[    0.105982] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.105982] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.105982] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.105982] acpi PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.105982] acpi PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.105982] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.105982] acpi PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    0.105982] acpi PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[    0.105982] acpi PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[    0.105982] PCI: root bus 00: using default resources
[    0.105982] PCI host bridge to bus 0000:00
[    0.105982] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.105982] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.105982] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.105982] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
[    0.108071] pci 0000:00:01.0: [8086:2591] type 01 class 0x060400
[    0.108121] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.108265] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
[    0.108372] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.108440] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.108501] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[    0.108559] pci 0000:00:1d.0: reg 0x20: [io  0x1800-0x181f]
[    0.108679] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
[    0.108736] pci 0000:00:1d.1: reg 0x20: [io  0x1820-0x183f]
[    0.108851] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
[    0.108908] pci 0000:00:1d.2: reg 0x20: [io  0x1840-0x185f]
[    0.109026] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
[    0.109083] pci 0000:00:1d.3: reg 0x20: [io  0x1860-0x187f]
[    0.109210] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[    0.109236] pci 0000:00:1d.7: reg 0x10: [mem 0xc0000000-0xc00003ff]
[    0.109342] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.109452] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.109622] pci 0000:00:1e.2: [8086:266e] type 00 class 0x040100
[    0.109645] pci 0000:00:1e.2: reg 0x10: [io  0x1c00-0x1cff]
[    0.109658] pci 0000:00:1e.2: reg 0x14: [io  0x1880-0x18bf]
[    0.109671] pci 0000:00:1e.2: reg 0x18: [mem 0xc0000800-0xc00009ff]
[    0.109684] pci 0000:00:1e.2: reg 0x1c: [mem 0xc0000400-0xc00004ff]
[    0.109748] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[    0.109852] pci 0000:00:1e.3: [8086:266d] type 00 class 0x070300
[    0.109875] pci 0000:00:1e.3: reg 0x10: [io  0x2400-0x24ff]
[    0.109888] pci 0000:00:1e.3: reg 0x14: [io  0x2000-0x207f]
[    0.109971] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
[    0.110027] pci 0000:00:1e.3: System wakeup disabled by ACPI
[    0.110088] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
[    0.110198] pci 0000:00:1f.0: address space collision: [io  0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
[    0.110205] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.110211] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0680-06ff
[    0.110216] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 1640-164f
[    0.110314] pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a
[    0.110332] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.110346] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.110359] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
[    0.110372] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
[    0.110385] pci 0000:00:1f.1: reg 0x20: [io  0x18c0-0x18cf]
[    0.110509] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
[    0.110583] pci 0000:00:1f.3: reg 0x20: [io  0x18e0-0x18ff]
[    0.110807] pci 0000:01:00.0: [1002:3150] type 00 class 0x030000
[    0.110820] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref]
[    0.110830] pci 0000:01:00.0: reg 0x14: [io  0x3000-0x30ff]
[    0.110840] pci 0000:01:00.0: reg 0x18: [mem 0xc0100000-0xc010ffff]
[    0.110867] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.110902] pci 0000:01:00.0: supports D1 D2
[    0.110957] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.110967] pci 0000:00:01.0: PCI bridge to [bus 01-ff]
[    0.110971] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.110976] pci 0000:00:01.0:   bridge window [mem 0xc0100000-0xc01fffff]
[    0.110981] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd7ffffff pref]
[    0.110985] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    0.111097] acpiphp: Slot [1] registered
[    0.111109] pci 0000:00:1c.0: PCI bridge to [bus 02-ff]
[    0.111115] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.111121] pci 0000:00:1c.0:   bridge window [mem 0xc4000000-0xc7ffffff]
[    0.111130] pci 0000:00:1c.0:   bridge window [mem 0xd8000000-0xdbffffff 64bit pref]
[    0.111134] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    0.111308] pci 0000:03:07.0: [8086:4220] type 00 class 0x028000
[    0.111335] pci 0000:03:07.0: reg 0x10: [mem 0xc8000000-0xc8000fff]
[    0.111453] pci 0000:03:07.0: PME# supported from D0 D3hot D3cold
[    0.111550] pci 0000:03:09.0: [1180:0476] type 02 class 0x060700
[    0.111576] pci 0000:03:09.0: reg 0x10: [mem 0x00000000-0x00000fff]
[    0.111615] pci 0000:03:09.0: supports D1 D2
[    0.111618] pci 0000:03:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.111712] pci 0000:03:09.1: [1180:0552] type 00 class 0x0c0010
[    0.111737] pci 0000:03:09.1: reg 0x10: [mem 0xc8001000-0xc80017ff]
[    0.111840] pci 0000:03:09.1: PME# supported from D0 D3hot D3cold
[    0.111930] pci 0000:03:09.2: [1180:0822] type 00 class 0x080500
[    0.111955] pci 0000:03:09.2: reg 0x10: [mem 0xc8001800-0xc80018ff]
[    0.112061] pci 0000:03:09.2: supports D1 D2
[    0.112064] pci 0000:03:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.112158] pci 0000:03:09.3: [1180:0592] type 00 class 0x088000
[    0.112183] pci 0000:03:09.3: reg 0x10: [mem 0xc8001c00-0xc8001cff]
[    0.112287] pci 0000:03:09.3: supports D1 D2
[    0.112290] pci 0000:03:09.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.112417] pci 0000:00:1e.0: PCI bridge to [bus 03-ff] (subtractive decode)
[    0.112426] pci 0000:00:1e.0:   bridge window [mem 0xc8000000-0xc80fffff]
[    0.112435] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.112439] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.112444] pci 0000:03:09.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.112508] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 07
[    0.112516] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 07
[    0.112525] pci_bus 0000:00: on NUMA node 0
[    0.112750] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[    0.112837] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[    0.112922] ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
[    0.113007] ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
[    0.113092] ACPI: PCI Interrupt Link [LNKE] (IRQs *11)
[    0.113176] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
[    0.113262] ACPI: PCI Interrupt Link [LNKG] (IRQs 5) *0, disabled.
[    0.113348] ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
[    0.113838] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.113852] ACPI: \_SB_.PCI0: notify handler is installed
[    0.113911] Found 1 acpi root devices
[    0.113989] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.114144] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.114148] vgaarb: loaded
[    0.114150] vgaarb: bridge control possible 0000:01:00.0
[    0.114490] SCSI subsystem initialized
[    0.114540] libata version 3.00 loaded.
[    0.114577] ACPI: bus type USB registered
[    0.114606] usbcore: registered new interface driver usbfs
[    0.114621] usbcore: registered new interface driver hub
[    0.114652] usbcore: registered new device driver usb
[    0.114808] PCI: Using ACPI for IRQ routing
[    0.124687] PCI: pci_cache_line_size set to 64 bytes
[    0.124759] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.124763] e820: reserve RAM buffer [mem 0x7fea0000-0x7fffffff]
[    0.124902] NetLabel: Initializing
[    0.124905] NetLabel:  domain hash size = 128
[    0.124906] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.124925] NetLabel:  unlabeled traffic allowed by default
[    0.125070] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.125077] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.125083] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.127152] Switched to clocksource hpet
[    0.135008] AppArmor: AppArmor Filesystem Enabled
[    0.135070] pnp: PnP ACPI init
[    0.135096] ACPI: bus type PNP registered
[    0.135703] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.135709] system 00:00: [mem 0xf0000000-0xf0003fff] has been reserved
[    0.135713] system 00:00: [mem 0xf0004000-0xf0004fff] has been reserved
[    0.135718] system 00:00: [mem 0xf0005000-0xf0005fff] has been reserved
[    0.135722] system 00:00: [mem 0xf0008000-0xf000bfff] has been reserved
[    0.135726] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.135733] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.136001] pnp 00:01: [dma 4]
[    0.136064] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.136110] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.136259] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.136313] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.136423] system 00:05: [io  0x0680-0x06df] has been reserved
[    0.136428] system 00:05: [io  0x06f0-0x06ff] has been reserved
[    0.136432] system 00:05: [io  0x0800-0x080f] has been reserved
[    0.136436] system 00:05: [io  0x0900-0x090f] has been reserved
[    0.136440] system 00:05: [io  0x1000-0x107f] could not be reserved
[    0.136444] system 00:05: [io  0x1180-0x11bf] has been reserved
[    0.136448] system 00:05: [io  0x1640-0x164f] has been reserved
[    0.136453] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.136516] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.136683] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.136737] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.136770] pnp: PnP ACPI: found 9 devices
[    0.136772] ACPI: bus type PNP unregistered
[    0.136777] PnPBIOS: Disabled by ACPI PNP
[    0.173779] pci 0000:03:09.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.173784] pci 0000:03:09.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.173790] pci 0000:00:1e.0: bridge window [io  0x1000-0x0fff] to [bus 03-07] add_size 1000
[    0.173795] pci 0000:03:09.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.173801] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 03-07] add_size 4000000
[    0.173813] pci 0000:00:1f.0: BAR 13: [io  0x1000-0x107f] has bogus alignment
[    0.173818] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.173822] pci 0000:00:1e.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.173831] pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[    0.173837] pci 0000:00:1e.0: BAR 13: assigned [io  0x5000-0x5fff]
[    0.173844] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0120000-0xc013ffff pref]
[    0.173849] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.173853] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.173859] pci 0000:00:01.0:   bridge window [mem 0xc0100000-0xc01fffff]
[    0.173864] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd7ffffff pref]
[    0.173870] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.173874] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.173882] pci 0000:00:1c.0:   bridge window [mem 0xc4000000-0xc7ffffff]
[    0.173888] pci 0000:00:1c.0:   bridge window [mem 0xd8000000-0xdbffffff 64bit pref]
[    0.173901] pci 0000:03:09.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.173905] pci 0000:03:09.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[    0.173909] pci 0000:03:09.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.173913] pci 0000:03:09.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.173918] pci 0000:03:09.0: BAR 0: assigned [mem 0x84000000-0x84000fff]
[    0.173926] pci 0000:03:09.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[    0.173931] pci 0000:03:09.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[    0.173935] pci 0000:03:09.0: BAR 13: assigned [io  0x5000-0x50ff]
[    0.173938] pci 0000:03:09.0: BAR 14: assigned [io  0x5400-0x54ff]
[    0.173943] pci 0000:03:09.0: CardBus bridge to [bus 04-07]
[    0.173946] pci 0000:03:09.0:   bridge window [io  0x5000-0x50ff]
[    0.173952] pci 0000:03:09.0:   bridge window [io  0x5400-0x54ff]
[    0.173959] pci 0000:03:09.0:   bridge window [mem 0x80000000-0x83ffffff pref]
[    0.173965] pci 0000:03:09.0:   bridge window [mem 0x88000000-0x8bffffff]
[    0.173971] pci 0000:00:1e.0: PCI bridge to [bus 03-07]
[    0.173976] pci 0000:00:1e.0:   bridge window [io  0x5000-0x5fff]
[    0.173983] pci 0000:00:1e.0:   bridge window [mem 0xc8000000-0xc80fffff]
[    0.173990] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0x83ffffff pref]
[    0.173999] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.174003] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.174007] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.174010] pci_bus 0000:01: resource 1 [mem 0xc0100000-0xc01fffff]
[    0.174014] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff pref]
[    0.174018] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.174021] pci_bus 0000:02: resource 1 [mem 0xc4000000-0xc7ffffff]
[    0.174025] pci_bus 0000:02: resource 2 [mem 0xd8000000-0xdbffffff 64bit pref]
[    0.174029] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
[    0.174032] pci_bus 0000:03: resource 1 [mem 0xc8000000-0xc80fffff]
[    0.174035] pci_bus 0000:03: resource 2 [mem 0x80000000-0x83ffffff pref]
[    0.174039] pci_bus 0000:03: resource 4 [io  0x0000-0xffff]
[    0.174042] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff]
[    0.174046] pci_bus 0000:04: resource 0 [io  0x5000-0x50ff]
[    0.174049] pci_bus 0000:04: resource 1 [io  0x5400-0x54ff]
[    0.174053] pci_bus 0000:04: resource 2 [mem 0x80000000-0x83ffffff pref]
[    0.174056] pci_bus 0000:04: resource 3 [mem 0x88000000-0x8bffffff]
[    0.174113] NET: Registered protocol family 2
[    0.174355] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.174387] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.174440] TCP: Hash tables configured (established 8192 bind 8192)
[    0.174481] TCP: reno registered
[    0.174485] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.174501] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.174597] NET: Registered protocol family 1
[    0.176208] pci 0000:01:00.0: Boot video device
[    0.176230] PCI: CLS 32 bytes, default 64
[    0.176309] Trying to unpack rootfs image as initramfs...
[    0.934504] Freeing initrd memory: 25560K (f4e04000 - f66fa000)
[    0.934700] Simple Boot Flag at 0x36 set to 0x1
[    0.934847] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[    0.934937] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.934941] Scanning for low memory corruption every 60 seconds
[    0.935354] Initialise system trusted keyring
[    0.935434] audit: initializing netlink socket (disabled)
[    0.935455] type=2000 audit(1462309078.932:1): initialized
[    0.968995] bounce pool size: 64 pages
[    0.969010] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.971392] VFS: Disk quotas dquot_6.5.2
[    0.971470] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.972258] fuse init (API version 7.22)
[    0.972380] msgmni has been set to 1718
[    0.972471] Key type big_key registered
[    0.972828] Key type asymmetric registered
[    0.972831] Asymmetric key parser 'x509' registered
[    0.972886] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.972922] io scheduler noop registered
[    0.972925] io scheduler deadline registered (default)
[    0.972977] io scheduler cfq registered
[    0.973337] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.973571] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.973687] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.973713] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.973783] vesafb: mode is 1400x1050x32, linelength=5600, pages=0
[    0.973785] vesafb: scrolling: redraw
[    0.973788] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.974299] vesafb: framebuffer at 0xd0000000, mapped to 0xf8480000, using 5760k, total 5760k
[    1.053278] Console: switching to colour frame buffer device 175x65
[    1.131371] fb0: VESA VGA frame buffer device
[    1.131414] intel_idle: does not run on family 6 model 13
[    1.131425] ipmi message handler version 39.2
[    1.132059] ACPI: AC Adapter [ADP1] (on-line)
[    1.132172] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    1.132325] ACPI: Lid Switch [LID0]
[    1.132389] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.132395] ACPI: Power Button [PWRB]
[    1.132548] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    1.132552] ACPI: Sleep Button [SLPB]
[    1.132633] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.132637] ACPI: Power Button [PWRF]
[    1.132721] ACPI: Fan [FAN1] (on)
[    1.132827] tsc: Marking TSC unstable due to TSC halts in idle
[    1.132840] ACPI: acpi_idle registered with cpuidle
[    1.133654] thermal LNXTHERM:00: registered as thermal_zone0
[    1.133658] ACPI: Thermal Zone [THRM] (54 C)
[    1.133691] GHES: HEST is not enabled!
[    1.133836] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.136297] Linux agpgart interface v0.103
[    1.138647] brd: module loaded
[    1.142229] isapnp: Scanning for PnP cards...
[    1.191456] loop: module loaded
[    1.191635] ata_piix 0000:00:1f.1: version 2.13
[    1.192750] scsi0 : ata_piix
[    1.192847] scsi1 : ata_piix
[    1.192977] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18c0 irq 14
[    1.192981] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18c8 irq 15
[    1.193492] libphy: Fixed MDIO Bus: probed
[    1.193667] tun: Universal TUN/TAP device driver, 1.6
[    1.193669] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.193866] PPP generic driver version 2.4.2
[    1.193929] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.193935] ehci-pci: EHCI PCI platform driver
[    1.194135] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.194145] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.194163] ehci-pci 0000:00:1d.7: debug port 1
[    1.198085] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    1.198222] ACPI: Battery Slot [BAT1] (battery present)
[    1.198272] ata2: port disabled--ignoring
[    1.198312] ehci-pci 0000:00:1d.7: irq 23, io mem 0xc0000000
[    1.241890] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.241965] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.241968] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.241972] usb usb1: Product: EHCI Host Controller
[    1.241975] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[    1.241978] usb usb1: SerialNumber: 0000:00:1d.7
[    1.242134] hub 1-0:1.0: USB hub found
[    1.242146] hub 1-0:1.0: 8 ports detected
[    1.242440] ehci-platform: EHCI generic platform driver
[    1.242454] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.242456] ohci-pci: OHCI PCI platform driver
[    1.242473] ohci-platform: OHCI generic platform driver
[    1.242484] uhci_hcd: USB Universal Host Controller Interface driver
[    1.242663] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.242671] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.242701] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
[    1.242776] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.242780] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.242783] usb usb2: Product: UHCI Host Controller
[    1.242786] usb usb2: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[    1.242790] usb usb2: SerialNumber: 0000:00:1d.0
[    1.242937] hub 2-0:1.0: USB hub found
[    1.242948] hub 2-0:1.0: 2 ports detected
[    1.243231] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.243239] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.243281] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[    1.243343] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.243347] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.243351] usb usb3: Product: UHCI Host Controller
[    1.243354] usb usb3: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[    1.243357] usb usb3: SerialNumber: 0000:00:1d.1
[    1.243486] hub 3-0:1.0: USB hub found
[    1.243496] hub 3-0:1.0: 2 ports detected
[    1.243775] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.243783] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.243825] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[    1.243893] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.243897] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.243900] usb usb4: Product: UHCI Host Controller
[    1.243904] usb usb4: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[    1.243907] usb usb4: SerialNumber: 0000:00:1d.2
[    1.244060] hub 4-0:1.0: USB hub found
[    1.244070] hub 4-0:1.0: 2 ports detected
[    1.244345] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.244353] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.244395] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[    1.244459] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.244463] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.244466] usb usb5: Product: UHCI Host Controller
[    1.244469] usb usb5: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[    1.244472] usb usb5: SerialNumber: 0000:00:1d.3
[    1.244602] hub 5-0:1.0: USB hub found
[    1.244612] hub 5-0:1.0: 2 ports detected
[    1.244830] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.291328] i8042: Detected active multiplexing controller, rev 1.1
[    1.293072] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.293080] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.293120] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.293152] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.293191] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.293337] mousedev: PS/2 mouse device common for all mice
[    1.293731] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.293766] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.293871] device-mapper: uevent: version 1.0.3
[    1.293962] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.293991] platform eisa.0: Probing EISA bus 0
[    1.294000] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.294005] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.294009] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.294012] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.294016] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.294035] platform eisa.0: EISA: Detected 0 cards
[    1.294044] cpufreq-nforce2: No nForce2 chipset.
[    1.294048] ledtrig-cpu: registered to indicate activity on CPUs
[    1.294259] TCP: cubic registered
[    1.294417] NET: Registered protocol family 10
[    1.294722] NET: Registered protocol family 17
[    1.294739] Key type dns_resolver registered
[    1.294956] Using IPI No-Shortcut mode
[    1.295058] Loading compiled-in X.509 certificates
[    1.301132] Loaded X.509 cert 'Magrathea: Glacier signing key: 77d70e1df42996dc92b01d759d3e8562ea32a1c7'
[    1.301151] registered taskstats version 1
[    1.304123] Key type trusted registered
[    1.306468] Key type encrypted registered
[    1.308834] AppArmor: AppArmor sha1 policy hashing enabled
[    1.308839] IMA: No TPM chip found, activating TPM-bypass!
[    1.309162] regulator-dummy: disabling
[    1.309212]   Magic number: 0:782:1002
[    1.309271] pnp 00:04: hash matches
[    1.309337] rtc_cmos 00:06: setting system clock to 2016-05-03 20:58:00 UTC (1462309080)
[    1.309643] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.309646] EDD information not available.
[    1.309708] PM: Hibernation image not present or could not be loaded.
[    1.484996] isapnp: No Plug & Play device found
[    1.487258] ata1.00: ATA-8: SAMSUNG HM160HC, LQ100-10, max UDMA/100
[    1.487263] ata1.00: 312581808 sectors, multi 16: LBA48 
[    1.487270] ata1.01: ATAPI: DV-W28E, S.0A, max UDMA/33
[    1.487791] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.502170] ata1.00: configured for UDMA/100
[    1.564345] ata1.01: configured for UDMA/33
[    1.605107] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM160HC  LQ10 PQ: 0 ANSI: 5
[    1.605327] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.605407] sd 0:0:0:0: [sda] Write Protect is off
[    1.605411] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.605446] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.605701] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.681595]  sda: sda1 sda2 < sda5 >
[    1.705293] scsi 0:0:1:0: CD-ROM            TEAC     DV-W28E          S.0A PQ: 0 ANSI: 5
[    1.788141] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.788145] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.788202] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.788283] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    1.788443] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    1.788932] Freeing unused kernel memory: 872K (c19ae000 - c1a88000)
[    1.788987] Write protecting the kernel text: 6512k
[    1.789083] Write protecting the kernel read-only data: 2756k
[    1.789085] NX-protecting the kernel data: 5776k
[    1.808211] systemd-udevd[98]: starting version 204
[    1.961727] [drm] Initialized drm 1.1.0 20060810
[    1.964984] sdhci: Secure Digital Host Controller Interface driver
[    1.964987] sdhci: Copyright(c) Pierre Ossman
[    1.978192] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[    2.101940] [drm] radeon kernel modesetting enabled.
[    2.102019] checking generic (d0000000 5a0000) vs hw (d0000000 8000000)
[    2.102021] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[    2.102052] Console: switching to colour dummy device 80x25
[    2.102622] sdhci-pci 0000:03:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
[    2.102634] sdhci-pci 0000:03:09.2: dummy supplies not allowed
[    2.102637] mmc0: no vqmmc regulator found
[    2.102640] sdhci-pci 0000:03:09.2: dummy supplies not allowed
[    2.102642] mmc0: no vmmc regulator found
[    2.105142] [drm] initializing kernel modesetting (RV380 0x1002:0x3150 0x144D:0xC018).
[    2.105161] [drm] register mmio base: 0xC0100000
[    2.105163] [drm] register mmio size: 65536
[    2.105339] [drm] Generation 2 PCI interface, using max accessible memory
[    2.105347] radeon 0000:01:00.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (128M used)
[    2.105351] radeon 0000:01:00.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
[    2.106210] mmc0: SDHCI controller on PCI [0000:03:09.2] using DMA
[    2.106726] [drm] Detected VRAM RAM=128M, BAR=128M
[    2.106728] [drm] RAM width 128bits DDR
[    2.109512] [TTM] Zone  kernel: Available graphics memory: 440320 kiB
[    2.109515] [TTM] Zone highmem: Available graphics memory: 1031492 kiB
[    2.109517] [TTM] Initializing pool allocator
[    2.109524] [TTM] Initializing DMA pool allocator
[    2.109553] [drm] radeon: 128M of VRAM memory ready
[    2.109556] [drm] radeon: 512M of GTT memory ready.
[    2.109586] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    2.110750] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[    2.112440] [drm] PCIE GART of 512M enabled (table at 0x00000000D0040000).
[    2.116442] ACPI: Video Device [ATIM] (multi-head: yes  rom: no  post: no)
[    2.116657] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input9
[    2.116983] radeon 0000:01:00.0: WB enabled
[    2.116990] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xf61a1000
[    2.116994] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.116996] [drm] Driver supports precise vblank timestamp query.
[    2.117028] radeon 0000:01:00.0: irq 42 for MSI/MSI-X
[    2.117041] radeon 0000:01:00.0: radeon: using MSI.
[    2.117069] [drm] radeon: irq initialized.
[    2.117082] [drm] Loading R300 Microcode
[    2.117336] [drm] radeon: ring at 0x00000000B0001000
[    2.117358] [drm] ring test succeeded in 1 usecs
[    2.117558] [drm] ib test succeeded in 0 usecs
[    2.117830] [drm] Panel ID String: Samsung LTN150P1-L02    
[    2.117833] [drm] Panel Size 1400x1050
[    2.137798] [drm] radeon legacy LVDS backlight initialized
[    2.137801] [drm] Radeon Display Connectors
[    2.137804] [drm] Connector 0:
[    2.137806] [drm]   VGA-1
[    2.137809] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[    2.137810] [drm]   Encoders:
[    2.137813] [drm]     CRT1: INTERNAL_DAC1
[    2.137815] [drm] Connector 1:
[    2.137817] [drm]   DVI-D-1
[    2.137818] [drm]   HPD1
[    2.137821] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[    2.137823] [drm]   Encoders:
[    2.137825] [drm]     DFP1: INTERNAL_TMDS1
[    2.137827] [drm] Connector 2:
[    2.137829] [drm]   LVDS-1
[    2.137830] [drm]   Encoders:
[    2.137832] [drm]     LCD1: INTERNAL_LVDS
[    2.137834] [drm] Connector 3:
[    2.137836] [drm]   SVIDEO-1
[    2.137837] [drm]   Encoders:
[    2.137839] [drm]     TV1: INTERNAL_DAC2
[    2.168074] firewire_ohci 0000:03:09.1: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    2.200502] [drm] Possible adm1032 thermal controller at 0x4c
[    2.200623] [drm] radeon: power management initialized
[    2.239796] [drm] fb mappable at 0xD00C0000
[    2.239798] [drm] vram apper at 0xD0000000
[    2.239800] [drm] size 5914624
[    2.239802] [drm] fb depth is 24
[    2.239804] [drm]    pitch is 5632
[    2.239915] fbcon: radeondrmfb (fb0) is primary device
[    2.271639] Console: switching to colour frame buffer device 175x65
[    2.280798] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    2.280802] radeon 0000:01:00.0: registered panic notifier
[    2.280817] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
[    2.668128] firewire_core 0000:03:09.1: created device fw0: GUID 0000f041200499fd, S400
[    3.192117] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.813880] random: init urandom read with 124 bits of entropy available
[    3.905376] random: nonblocking pool is initialized
[    5.812054] Adding 2094076k swap on /dev/sda5.  Priority:-1 extents:1 across:2094076k FS
[    6.747187] systemd-udevd[293]: starting version 204
[    7.950455] lp: driver loaded but no devices found
[    8.016797] ppdev: user-space parallel port driver
[    8.888233] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    9.496652] 2-004c supply vcc not found, using dummy regulator
[    9.504988] lm90 2-004c: Register 0x4 read failed (-6)
[    9.504994] lm90 2-004c: Failed to read convrate register!
[    9.509956] lm90 2-004c: Register 0x3 read failed (-6)
[    9.509961] lm90 2-004c: Initialization failed!
[    9.585014] intel_rng: FWH not detected
[    9.986150] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[    9.986161] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.986164] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[    9.986169] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.986172] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.744867] yenta_cardbus 0000:03:09.0: CardBus bridge found [144d:c018]
[   10.882476] yenta_cardbus 0000:03:09.0: ISA IRQ mask 0x0cb8, PCI irq 16
[   10.882484] yenta_cardbus 0000:03:09.0: Socket status: 30000006
[   10.882494] yenta_cardbus 0000:03:09.0: pcmcia: parent PCI bridge window: [io  0x5000-0x5fff]
[   10.882499] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff:
[   10.920324] cfg80211: Calling CRDA to update world regulatory domain
[   10.883763]  excluding 0x5000-0x50ff 0x5400-0x54ff
[   10.924639] yenta_cardbus 0000:03:09.0: pcmcia: parent PCI bridge window: [mem 0xc8000000-0xc80fffff]
[   10.924646] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc8000000-0xc80fffff:
[   10.924650]  excluding 0xc8000000-0xc800ffff
[   10.924666] yenta_cardbus 0000:03:09.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
[   10.924670] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff:
[   10.924685]  excluding 0x80000000-0x83ffffff
[   10.942095] r592: driver successfully loaded
[   11.105041] lib80211: common routines for IEEE802.11 drivers
[   11.105048] lib80211_crypt: registered algorithm 'NULL'
[   11.180704] libipw: 802.11 data/management/control stack, git-1.1.13
[   11.180711] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   11.270881] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[   11.270887] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[   11.271144] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[   11.375942] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.1, id: 0x2580b1, caps: 0xa04713/0x200000/0x0, board id: 3655, fw id: 32440
[   11.412423] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13
[   11.716798] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
[   11.761574] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[   11.762578]  excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[   11.763311] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[   11.763687]  excluding 0x3f0-0x3f7 0x4d0-0x4d7
[   11.764075] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[   11.764650]  clean.
[   11.764670] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[   11.765310]  clean.
[   11.765334] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   11.765341]  excluding 0xc0000-0xd3fff 0xdc000-0xfffff
[   11.765371] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   11.765390]  clean.
[   11.765409] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   11.765423]  excluding 0x60000000-0x60ffffff
[   11.765444] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[   11.766102]  clean.
[   12.525197] cfg80211: World regulatory domain updated:
[   12.525204] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.525208] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.525211] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.525214] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.525216] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.525219] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.890315] type=1400 audit(1462309092.078:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=448 comm="apparmor_parser"
[   12.890329] type=1400 audit(1462309092.078:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=448 comm="apparmor_parser"
[   12.890337] type=1400 audit(1462309092.078:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=448 comm="apparmor_parser"
[   12.891134] type=1400 audit(1462309092.078:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=448 comm="apparmor_parser"
[   12.891144] type=1400 audit(1462309092.078:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=448 comm="apparmor_parser"
[   12.891561] type=1400 audit(1462309092.078:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=448 comm="apparmor_parser"
[   12.892956] type=1400 audit(1462309092.082:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=464 comm="apparmor_parser"
[   12.892966] type=1400 audit(1462309092.082:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=464 comm="apparmor_parser"
[   12.892974] type=1400 audit(1462309092.082:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=464 comm="apparmor_parser"
[   12.893777] type=1400 audit(1462309092.082:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=464 comm="apparmor_parser"
[   13.124030] intel8x0_measure_ac97_clock: measured 55433 usecs (2671 samples)
[   13.124037] intel8x0: clocking to 48000
[   13.682352] init: failsafe main process (505) killed by TERM signal
[   16.136348] Bluetooth: Core ver 2.17
[   16.136385] NET: Registered protocol family 31
[   16.136388] Bluetooth: HCI device and connection manager initialized
[   16.137308] Bluetooth: HCI socket layer initialized
[   16.137314] Bluetooth: L2CAP socket layer initialized
[   16.137322] Bluetooth: SCO socket layer initialized
[   16.341627] Bluetooth: RFCOMM TTY layer initialized
[   16.341645] Bluetooth: RFCOMM socket layer initialized
[   16.341656] Bluetooth: RFCOMM ver 1.11
[   16.355003] init: cups main process (674) killed by HUP signal
[   16.355023] init: cups main process ended, respawning
[   16.484126] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.484132] Bluetooth: BNEP filters: protocol multicast
[   16.484146] Bluetooth: BNEP socket layer initialized
[   19.282772] init: alsa-restore main process (878) terminated with status 99
[   19.783835] audit_printk_skb: 111 callbacks suppressed
[   19.783841] type=1400 audit(1462309098.970:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=931 comm="apparmor_parser"
[   24.163859] init: plymouth-upstart-bridge main process ended, respawning
[   24.195477] init: plymouth-upstart-bridge main process ended, respawning
[   45.775248] type=1400 audit(1462309124.962:50): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1330 comm="apparmor_parser"
[   45.775264] type=1400 audit(1462309124.962:51): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1330 comm="apparmor_parser"
[   45.776389] type=1400 audit(1462309124.966:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1330 comm="apparmor_parser"
[  452.703268] lib80211_crypt: registered algorithm 'CCMP'
[  484.760021] mmc0: Controller never released inhibit bit(s).
[  484.935458] mmc0: new SDHC card at address aaaa
[  484.995171] mmcblk0: mmc0:aaaa SE32G 29.7 GiB 
[  485.007092]  mmcblk0:
[ 1466.933856] init: upstart-udev-bridge main process (287) terminated with status 1
[ 1466.933879] init: upstart-udev-bridge main process ended, respawning
[ 1466.935087] init: upstart-file-bridge main process (453) terminated with status 1
[ 1466.935105] init: upstart-file-bridge main process ended, respawning
[ 1466.935921] init: upstart-socket-bridge main process (527) terminated with status 1
[ 1466.935938] init: upstart-socket-bridge main process ended, respawning
enrico@enrico-SX20S:~$ 

So bitte schön tomtomtom sieh dir die Befehle an ☺ Hier die SDHC Karte. Zum Glück habe ich noch paar Jahre bis der Laptop in Rente muss. Fakt ist eins LTS 16.04 ist Schrott!

tomtomtom schrieb:

Und laut Hersteller-Dokumentation kann das Gerät nicht mit SDHC-Karten umgehen.

[  484.935458] mmc0: new SDHC card at address aaaa
[  484.995171] mmcblk0: mmc0:aaaa SE32G 29.7 GiB 
[  485.007092]  mmcblk0:

Was soviel heisst nicht zum 1 mal habe sowas erlebt. Habe mal ein Acer Travelmate 312 T gehabt. Laut Hersteller nur 128 MB Arbeitsspeicher fähig. Habe das Teil bis 144 MB aufrüsten können.