Hallo,
ich habe das Problem, dass ich im Lubuntu keine Drucker mehr einrichten kann.
Beim Aufruf kommt jetzt die Meldung: Druckdienst nicht verfügbar.
Die HPLIP-Installationsversuche wurden gemäß einer Anleitung aus dem Internet
https://axebase.net/blog/2014/12/05/installation-hp-linux-imaging-and-printing/
durchgeführt. Nachfolgend der letzte Ablauf:
erup@erup:~$ system-config-printer
(system-config-printer.py:2371): dbind-WARNING **: 12:54:25.031: Error retrieving accessibility bus address: org.freedesktop.DBus.Error.ServiceUnknown: The name org.a11y.Bus was not provided by any .service files
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(system-config-printer:2371): GLib-GIO-CRITICAL **: 12:54:25.281: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
erup@erup:~$
erup@erup:~$ sudo apt-get purge hplip hpijs
[sudo] Passwort für erup:
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
E: Paket hpijs kann nicht gefunden werden.
erup@erup:~$
erup@erup:~$ sudo apt-get install cups build-essential libjpeg62-dev libusb-dev lsb
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
build-essential ist schon die neueste Version (12.4ubuntu1).
libusb-dev ist schon die neueste Version (2:0.1.12-31).
lsb ist schon die neueste Version (9.20170808ubuntu1).
cups ist schon die neueste Version (2.2.7-1ubuntu2.7).
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
gir1.2-rsvg-2.0 libbz2-dev libcairo-script-interpreter2 libcairo2-dev
libcupsfilters-dev libexif-dev libexif-doc libfontconfig1-dev
libfreetype6-dev libgdk-pixbuf2.0-dev libice-dev libilmbase-dev libjbig-dev
liblcms2-dev liblqr-1-0-dev liblzma-dev libmagick++-6-headers
libmagick++-6.q16-7 libmagickcore-6-arch-config libmagickcore-6-headers
libmagickwand-6-headers libopenexr-dev libpixman-1-dev libpng-dev
libpng-tools libpthread-stubs0-dev librsvg2-dev libsm-dev libtiffxx5
libwmf-dev libx11-dev libx11-doc libxau-dev libxcb-render0-dev
libxcb-shm0-dev libxcb1-dev libxdmcp-dev libxext-dev libxrender-dev
libxt-dev x11proto-core-dev x11proto-dev x11proto-xext-dev
xorg-sgml-doctools xtrans-dev
Verwenden Sie »sudo apt autoremove«, um sie zu entfernen.
Die folgenden Pakete werden ENTFERNT:
libcups2-dev libcupsimage2-dev libdjvulibre-dev libjpeg-dev
libjpeg-turbo8-dev libjpeg8-dev libmagick++-6.q16-dev libmagick++-dev
libmagickcore-6.q16-dev libmagickwand-6.q16-dev libtiff-dev libtiff5-dev
libzbar-dev
Die folgenden NEUEN Pakete werden installiert:
libjpeg62-dev
0 aktualisiert, 1 neu installiert, 13 zu entfernen und 0 nicht aktualisiert.
Es müssen noch 0 B von 173 kB an Archiven heruntergeladen werden.
Nach dieser Operation werden 18,2 MB Plattenplatz freigegeben.
Möchten Sie fortfahren? [J/n] j
(Lese Datenbank ... 214854 Dateien und Verzeichnisse sind derzeit installiert.)
Entfernen von libzbar-dev:amd64 (0.10+doc-10.1build2) ...
Entfernen von libmagick++-dev (8:6.9.7.4+dfsg-16ubuntu6.7) ...
Entfernen von libmagick++-6.q16-dev:amd64 (8:6.9.7.4+dfsg-16ubuntu6.7) ...
Entfernen von libmagickwand-6.q16-dev:amd64 (8:6.9.7.4+dfsg-16ubuntu6.7) ...
Entfernen von libmagickcore-6.q16-dev:amd64 (8:6.9.7.4+dfsg-16ubuntu6.7) ...
Entfernen von libdjvulibre-dev:amd64 (3.5.27.1-8) ...
Entfernen von libjpeg-dev:amd64 (8c-2ubuntu8) ...
Entfernen von libjpeg8-dev:amd64 (8c-2ubuntu8) ...
Entfernen von libcups2-dev:amd64 (2.2.7-1ubuntu2.7) ...
Entfernen von libcupsimage2-dev:amd64 (2.2.7-1ubuntu2.7) ...
Entfernen von libtiff-dev (4.0.9-5ubuntu0.2) ...
Entfernen von libtiff5-dev:amd64 (4.0.9-5ubuntu0.2) ...
Entfernen von libjpeg-turbo8-dev:amd64 (1.5.2-0ubuntu5.18.04.1) ...
Vormals nicht ausgewähltes Paket libjpeg62-dev:amd64 wird gewählt.
(Lese Datenbank ... 214652 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../libjpeg62-dev_1%3a6b2-3_amd64.deb ...
Entpacken von libjpeg62-dev:amd64 (1:6b2-3) ...
libjpeg62-dev:amd64 (1:6b2-3) wird eingerichtet ...
Trigger für man-db (2.8.3-2ubuntu0.1) werden verarbeitet ...
erup@erup:~$
erup@erup:~$ sudo mkdir -p /var/spool/lpd/
erup@erup:~$ sudo mkdir -p /usr/share/cups/model/
erup@erup:~$
erup@erup:~$ mkdir -p ~/Downloads/hp/hplip/
erup@erup:~$ cd ~/Downloads/hp/hplip/
erup@erup:~/Downloads/hp/hplip$
erup@erup:~/Downloads/hp/hplip$ wget http://netcologne.dl.sourceforge.net/project/hplip/hplip/3.19.8/hplip-3.19.8.run
--2019-09-06 12:56:41-- http://netcologne.dl.sourceforge.net/project/hplip/hplip/3.19.8/hplip-3.19.8.run
Auflösen des Hostnamens netcologne.dl.sourceforge.net (netcologne.dl.sourceforge.net) … 78.35.24.46, 2001:4dd0:1234:6::5f
Verbindungsaufbau zu netcologne.dl.sourceforge.net (netcologne.dl.sourceforge.net)|78.35.24.46|:80 … verbunden.
HTTP-Anforderung gesendet, auf Antwort wird gewartet … 200 OK
Länge: 25483542 (24M) [application/x-makeself]
Wird in »hplip-3.19.8.run.6« gespeichert.
hplip-3.19.8.run.6 100%[===================>] 24,30M 344KB/s in 72s
2019-09-06 12:57:54 (344 KB/s) - »hplip-3.19.8.run.6« gespeichert [25483542/25483542]
erup@erup:~/Downloads/hp/hplip$
erup@erup:~/Downloads/hp/hplip$ sh hplip-3.19.8.run
Creating directory hplip-3.19.8
Verifying archive integrity... All good.
Uncompressing HPLIP 3.19.8 Self Extracting Archive.................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................chown: der Eigentümer von './.libs/libhpmud.so.0.0.6T' wird geändert: Vorgang nicht zulässig
chown: der Eigentümer von './.libs/libsane-hpaio.so.1.0.0T' wird geändert: Vorgang nicht zulässig
chown: der Eigentümer von './.libs/libhpipp.so.0.0.1T' wird geändert: Vorgang nicht zulässig
chown: der Eigentümer von './.libs/hpmudext.soT' wird geändert: Vorgang nicht zulässig
chown: der Eigentümer von './.libs/cupsext.soT' wird geändert: Vorgang nicht zulässig
chgrp: die Gruppe von './.libs/libhpmud.so.0.0.6T' wird geändert: Vorgang nicht zulässig
chgrp: die Gruppe von './.libs/libsane-hpaio.so.1.0.0T' wird geändert: Vorgang nicht zulässig
chgrp: die Gruppe von './.libs/libhpipp.so.0.0.1T' wird geändert: Vorgang nicht zulässig
chgrp: die Gruppe von './.libs/hpmudext.soT' wird geändert: Vorgang nicht zulässig
chgrp: die Gruppe von './.libs/cupsext.soT' wird geändert: Vorgang nicht zulässig
HP Linux Imaging and Printing System (ver. 3.19.8)
HPLIP Installer ver. 5.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Installer log saved in: hplip-install_Fri-06-Sep-2019_12:58:20.log
\
note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.
INSTALLATION MODE
-----------------
Automatic mode will install the full HPLIP solution with the most common options.
Custom mode allows you to choose installation options to fit specific requirements.
Please choose the installation mode (a=automatic*, c=custom, q=quit) :
INTRODUCTION
------------
This installer will install HPLIP version 3.19.8 on your computer.
Please close any running package management systems now (YaST, Adept, Synaptic, Up2date, etc).
DISTRO/OS CONFIRMATION
----------------------
Distro appears to be Ubuntu 18.04.
Is "Ubuntu 18.04" your correct distro/OS and version (y=yes*, n=no, q=quit) ?
Initializing. Please wait...
ENTER USER PASSWORD
-------------------
Please enter the sudoer (erup)'s password:
INSTALLATION NOTES
------------------
Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information. Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
Please read the installation notes. Press <enter> to continue or 'q' to quit:
SECURITY PACKAGES
-----------------
AppArmor is installed.
AppArmor protects the application from external intrusion attempts making the application secure
Would you like to have this installer install the hplip specific policy/profile (y=yes*, n=no, q=quit) ?
RUNNING PRE-INSTALL COMMANDS
----------------------------
OK
MISSING DEPENDENCIES
--------------------
Following dependencies are not installed. HPLIP will not work if all REQUIRED dependencies are not installed and some of the HPLIP features will not work if OPTIONAL dependencies are not installed.
Package-Name Component Required/Optional
cups-devel base REQUIRED
cups-image base REQUIRED
Do you want to install these missing dependencies (y=yes*, n=no, q=quit) ?
INSTALL MISSING REQUIRED DEPENDENCIES
-------------------------------------
note: Installation of dependencies requires an active internet connection.
warning: Missing REQUIRED dependency: cups-devel (CUPS devel- Common Unix Printing System development files)
warning: Missing REQUIRED dependency: cups-image (CUPS image - CUPS image development files)
CHECKING FOR NETWORK CONNECTION
-------------------------------
Network connection present.
RUNNING PRE-PACKAGE COMMANDS
----------------------------
sudo dpkg --configure -a (Pre-depend step 1)
sudo apt-get install --yes --force-yes -f (Pre-depend step 2)
warning: An error occurred running 'sudo apt-get update'
sudo apt-get update (Pre-depend step 3)
OK
DEPENDENCY AND CONFLICT RESOLUTION
----------------------------------
Running 'sudo apt-get install --assume-yes libcups2-dev'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes cups-bsd'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes cups-client'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes libcupsimage2-dev'
Please wait, this may take several minutes...
HPLIP-3.19.8 exists, this may conflict with the new one being installed.
Do you want to ('i'= Remove and Install*, 'q'= Quit)? :
Starting uninstallation...
HPLIP uninstallation is completed
RUNNING POST-PACKAGE COMMANDS
-----------------------------
OK
RE-CHECKING DEPENDENCIES
------------------------
OK
RUNNING SCANJET DEPENDENCY COMMANDS
-----------------------------------
sudo apt-get install --assume-yes python-pip (Scanjet-depend step 1)
sudo pip2 install --upgrade pip (Scanjet-depend step 2)
sudo apt-get install --assume-yes libleptonica-dev (Scanjet-depend step 3)
sudo apt-get install --assume-yes tesseract-ocr (Scanjet-depend step 4)
sudo apt-get install --assume-yes libtesseract-dev (Scanjet-depend step 5)
sudo -H pip2 install tesserocr (Scanjet-depend step 6)
sudo apt-get install --assume-yes tesseract-ocr-all (Scanjet-depend step 7)
sudo apt-get install --assume-yes libzbar-dev (Scanjet-depend step 8)
sudo apt-get install --assume-yes python-zbar (Scanjet-depend step 9)
sudo -H pip2 install opencv-python (Scanjet-depend step 10)
sudo -H pip2 install PyPDF2 (Scanjet-depend step 11)
sudo -H pip2 install imutils (Scanjet-depend step 12)
sudo -H pip2 install pypdfocr (Scanjet-depend step 13)
sudo -H pip2 install scikit-image (Scanjet-depend step 14)
sudo -H pip2 install scipy (Scanjet-depend step 15)
OK
PRE-BUILD COMMANDS
------------------
OK
BUILD AND INSTALL
-----------------
Running './configure --with-hpppddir=/usr/share/ppd/HP --libdir=/usr/lib --prefix=/usr --enable-qt4 --disable-qt5 --enable-doc-build --disable-cups-ppd-install --disable-foomatic-drv-install --disable-libusb01_build --disable-foomatic-ppd-install --disable-hpijs-install --disable-class-driver --disable-udev_sysfs_rules --disable-policykit --enable-cups-drv-install --enable-hpcups-install --enable-network-build --enable-dbus-build --enable-scan-build --enable-fax-build --enable-apparmor_build'
Please wait, this may take several minutes...
Command completed successfully.
Running 'make clean'
Please wait, this may take several minutes...
Command completed successfully.
Running 'make'
Please wait, this may take several minutes...
Command completed successfully.
Running 'sudo make install'
Please wait, this may take several minutes...
Command completed successfully.
Build complete.
POST-BUILD COMMANDS
-------------------
CLOSE HP_SYSTRAY
----------------
Sending close message to hp-systray (if it is currently running)...
OK
HPLIP UPDATE NOTIFICATION
-------------------------
Do you want to check for HPLIP updates?. (y=yes*, n=no) : n
RESTART OR RE-PLUG IS REQUIRED
------------------------------
If you are installing a USB connected printer, and the printer was plugged in
when you started this installer, you will need to either restart your PC or
unplug and re-plug in your printer (USB cable only). If you choose to restart,
run this command after restarting: hp-setup (Note: If you are using a parallel
connection, you will have to restart your PC. If you are using network/wireless,
you can ignore and continue).
Restart or re-plug in your printer (r=restart, p=re-plug in*, i=ignore/continue, q=quit) :
Please unplug and re-plugin your printer now. Press <enter> to continue or 'q' to quit:
PRINTER SETUP
-------------
Please make sure your printer is connected and powered on at this time.
Do you want to setup printer in GUI mode? (u=GUI mode*, i=Interactive mode) :
HP Linux Imaging and Printing System (ver. 3.19.8)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
(python:19925): GLib-GIO-CRITICAL **: 13:05:38.302: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(python:19925): GLib-GIO-CRITICAL **: 13:05:38.302: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(python:19925): GLib-GIO-CRITICAL **: 13:05:38.302: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
Searching... (bus=usb, search=(None), desc=0)
Segmentation fault
error: The device you are trying to setup requires a binary plug-in. Some functionalities may not work as expected without plug-ins. Please run 'hp-plugin' as normal user to install plug-ins. Visit http://hplipopensource.com for more infomation.
Segmentation fault
error: The device you are trying to setup requires a binary plug-in. Some functionalities may not work as expected without plug-ins. Please run 'hp-plugin' as normal user to install plug-ins. Visit http://hplipopensource.com for more infomation.
Done.
RE-STARTING HP_SYSTRAY
----------------------
HP Linux Imaging and Printing System (ver. 3.19.8)
System Tray Status Service ver. 2.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
/usr/lib/python2.7/dist-packages/gtk-2.0/gtk/__init__.py:127: RuntimeWarning: PyOS_InputHook is not available for interactive use of PyGTK
set_interactive(1)
(hp-systray:19973): GLib-GIO-CRITICAL **: 13:06:54.185: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(hp-systray:19973): GLib-GIO-CRITICAL **: 13:06:54.185: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(hp-systray:19973): GLib-GIO-CRITICAL **: 13:06:54.185: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
erup@erup:~/Downloads/hp/hplip$
erup@erup:~/Downloads/hp/hplip$ hp-setup
HP Linux Imaging and Printing System (ver. 3.19.8)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
(python:19987): GLib-GIO-CRITICAL **: 13:07:24.703: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(python:19987): GLib-GIO-CRITICAL **: 13:07:24.703: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(python:19987): GLib-GIO-CRITICAL **: 13:07:24.703: g_dbus_proxy_new: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
Searching... (bus=usb, search=(None), desc=0)
Segmentation fault
error: The device you are trying to setup requires a binary plug-in. Some functionalities may not work as expected without plug-ins. Please run 'hp-plugin' as normal user to install plug-ins. Visit http://hplipopensource.com for more infomation.
Done.
erup@erup:~/Downloads/hp/hplip$ cd ~/Downloads/hp/hplip/
erup@erup:~/Downloads/hp/hplip$ wget http://hplipopensource.com/hplip-web/plugin/hplip-3.19.8-plugin.run
--2019-09-06 13:08:45-- http://hplipopensource.com/hplip-web/plugin/hplip-3.19.8-plugin.run
Auflösen des Hostnamens hplipopensource.com (hplipopensource.com) … 23.185.0.2
Verbindungsaufbau zu hplipopensource.com (hplipopensource.com)|23.185.0.2|:80 … verbunden.
HTTP-Anforderung gesendet, auf Antwort wird gewartet … 301 Moved Permanently
Platz: https://developers.hp.com/hp-linux-imaging-and-printing [folgend]
--2019-09-06 13:08:45-- https://developers.hp.com/hp-linux-imaging-and-printing
Auflösen des Hostnamens developers.hp.com (developers.hp.com) … 23.185.0.2
Verbindungsaufbau zu developers.hp.com (developers.hp.com)|23.185.0.2|:443 … verbunden.
HTTP-Anforderung gesendet, auf Antwort wird gewartet … 200 OK
Länge: 54371 (53K) [text/html]
Wird in »hplip-3.19.8-plugin.run.4« gespeichert.
hplip-3.19.8-plugin 100%[===================>] 53,10K 337KB/s in 0,2s
2019-09-06 13:08:45 (337 KB/s) - »hplip-3.19.8-plugin.run.4« gespeichert [54371/54371]
erup@erup:~/Downloads/hp/hplip$ sh hplip-3.19.8-plugin.run
: not found8-plugin.run: 1: hplip-3.19.8-plugin.run:
hplip-3.19.8-plugin.run: 2: hplip-3.19.8-plugin.run: Syntax error: redirection unexpected
erup@erup:~/Downloads/hp/hplip$ Für die Diagnose vielleicht hilfreich:
erup@erup:~$ systemctl status cups
● cups.service - CUPS Scheduler
Loaded: loaded (/lib/systemd/system/cups.service; enabled; vendor preset: ena
Active: failed (Result: start-limit-hit) since Fri 2019-09-06 14:06:57 CEST;
Docs: man:cupsd(8)
Process: 878 ExecStart=/usr/sbin/cupsd -l (code=killed, signal=TERM)
Main PID: 878 (code=killed, signal=TERM)
Sep 06 14:06:57 erup systemd[1]: cups.service: Service hold-off time over, sched
Sep 06 14:06:57 erup systemd[1]: cups.service: Scheduled restart job, restart co
Sep 06 14:06:57 erup systemd[1]: Stopped CUPS Scheduler.
Sep 06 14:06:57 erup systemd[1]: cups.service: Start request repeated too quickl
Sep 06 14:06:57 erup systemd[1]: cups.service: Failed with result 'start-limit-h
Sep 06 14:06:57 erup systemd[1]: Failed to start CUPS Scheduler.
lines 1-13/13 (END)
Für einen Tipp würde ich mich freuen.
MfG ERUP2012
