buzz_lightzyear
(Themenstarter)
Anmeldungsdatum: 8. Juni 2008
Beiträge: 422
|
Hi, hier hab ich mal eine Testaufnahme mit Musik (Radiohead - Creep) gemacht... hier war nur das Mikrofon angesteckt und ich hab das Mikro zur Box gehalten... genau so klingen meine Audiokonferenzen. Das Herumspielen mit den Reglern bewirkt halt nur, dass das Rauschen und halt auch meine Stimme leiser wird. Ich könnte natürlich nur mehr reinschreien bei den Konferenzen; das will ich allerdings auch nicht 😉 Danke & Lg
Buzzzz
- rauschen.mp3 (199.9 KiB)
- Download rauschen.mp3
|
Marant--
Anmeldungsdatum: 4. April 2022
Beiträge: 744
|
Wieso läuft bei Dir noch ein Ventilator? Im Ernst, das ist ne Zunutung für den Anderen. Mal getestet, wie sich das über den hinteren Anschluss anhört? Hier ist auch noch Mic Test ohne PA, also direkt von ALSA. Rauschen auch so?(lame muss installiert sein, Datei dann in /home/<dein_user>/ arecord --device="hw:0,0" -V mono -v -f S16_LE -t raw | lame -r -b 192 - ~/mic_test.mp3 falls der belegt meldet, dann PA systemctl --user stop pulseaudio.socket pulseaudio.service PA wieder aktivieren systemctl --user start pulseaudio.socket pulseaudio.service
|
buzz_lightzyear
(Themenstarter)
Anmeldungsdatum: 8. Juni 2008
Beiträge: 422
|
Hi! So, jetzt widme ich mich wieder mal meinem schönen Problem ☺ Der Input von arecord gibt mir folgenden Output: myName@myPC:~$ arecord --device="hw:0,0" -V mono -v -f S16_LE -t raw | lame -r -b 192 - ~/mic_test.mp3
Recording raw data 'stdin' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
arecord: set_params:1374: Channels count non available
WARNING: libsndfile may ignore -r and perform fseek's on the input.
Compile without libsndfile if this is a problem.
Assuming raw pcm input file
LAME 3.100 64bits (http://lame.sf.net)
Using polyphase lowpass filter, transition band: 18671 Hz - 19205 Hz
Encoding <stdin> to /home/myName/mic_test.mp3
Encoding as 44.1 kHz j-stereo MPEG-1 Layer III (7.3x) 192 kbps qval=3
myName@myPC:~$ Reinsagen kann ich nichts, es ist gleich wieder vorbei. Es wird eine 1,2 KB große Datei angelegt, die ich allerdings nicht abspielen kann. Meldung: "Error Reading Metadata". Den anderen Befehl mit "Stop" hab ich auch probiert... da passiert das gleiche. Danke & Lg
buzzzz
|
buzz_lightzyear
(Themenstarter)
Anmeldungsdatum: 8. Juni 2008
Beiträge: 422
|
aja, beim hinteren Anschluss klingts gleich ☹
|
Marant--
Anmeldungsdatum: 4. April 2022
Beiträge: 744
|
Bleibt noch per Ausschluss zu probieren. Also starten per Livesystem und Testen, Mic an anderen Rechner, anderes Mic an den Rechner, sowas eben. Geht's im Livesysten dann poste mal amixer
|
buzz_lightzyear
(Themenstarter)
Anmeldungsdatum: 8. Juni 2008
Beiträge: 422
|
Habs mal mit Live-System probiert, da klingts ganz gleich (Lubuntu 22.04). Ich check mal einen anderen Computer ☹ Das Mikro geht unter Windows zwar leise, aber das (elektrische?) Rauschen ist halt nicht da, und auch nicht die Ausschläge bei Audacity. Ich meld mich wieder. Danke ☺ Lg buzzz
|
buzz_lightzyear
(Themenstarter)
Anmeldungsdatum: 8. Juni 2008
Beiträge: 422
|
Hi, so, neuer Versuch. Ich hab von einem anderen Linux-Rechner eine Externe USB-Soundkarte mitgenommen und zwar die Unitek Y-247A. Vorne angesteckt, ging mit Plug and Play und ich hab die schönste Aufnahme bei Audacity ohne Rauschen oder irgendwas -.- Hier der Output von amixer. Ich habs einmal mit der USB-Soundkarte gemacht, einmal ohne... der Output ist allerdings der gleiche, habs mit Meld gecheckt. Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 87
Mono: Playback 45 [52%] [-31.50dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 87 [100%] [0.00dB] [on]
Front Right: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 87 [100%] [0.00dB] [off]
Front Right: Playback 87 [100%] [0.00dB] [off]
Simple mixer control 'Front Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 3 [10%] [-30.00dB] [off]
Front Right: Playback 3 [10%] [-30.00dB] [off]
Simple mixer control 'Front Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 3 [100%] [30.00dB]
Front Right: 3 [100%] [30.00dB]
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 0 [0%] [-65.25dB] [off]
Front Right: Playback 0 [0%] [-65.25dB] [off]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 87
Mono: Playback 0 [0%] [-65.25dB] [off]
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 87
Mono: Playback 0 [0%] [-65.25dB] [off]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 8 [26%] [-22.50dB] [off]
Front Right: Playback 8 [26%] [-22.50dB] [off]
Simple mixer control 'Line Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Beep',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 1 [3%] [-33.00dB] [off]
Front Right: Playback 1 [3%] [-33.00dB] [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 63
Front Left: Capture 63 [100%] [30.00dB] [on]
Front Right: Capture 63 [100%] [30.00dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 63
Front Left: Capture 0 [0%] [-17.25dB] [off]
Front Right: Capture 0 [0%] [-17.25dB] [off]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Disabled'
Simple mixer control 'Digital',0
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 61 [51%] [0.50dB]
Front Right: Capture 61 [51%] [0.50dB]
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Front Mic' 'Rear Mic' 'Line'
Item0: 'Front Mic'
Simple mixer control 'Input Source',1
Capabilities: cenum
Items: 'Front Mic' 'Rear Mic' 'Line'
Item0: 'Front Mic'
Simple mixer control 'Loopback Mixing',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Disabled'
Simple mixer control 'Rear Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 1 [3%] [-33.00dB] [off]
Front Right: Playback 1 [3%] [-33.00dB] [off]
Simple mixer control 'Rear Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB] Danke & Lg
buzzz
|
Marant--
Anmeldungsdatum: 4. April 2022
Beiträge: 744
|
ich hab die schönste Aufnahme bei Audacity ohne Rauschen oder irgendwas
Gut, damit wäre das Mic als Fehlerquelle ausgeschlossen.
Hier der Output von amixer. Ich habs einmal mit der USB-Soundkarte gemacht, einmal ohne... der Output ist allerdings der gleiche, habs mit Meld gecheckt.
Kein Wunder, die Ausgabe ist immer die interne Card. Hättest schon die Kartennummer mitgeben müssen. Also, Karten anzeigen, u.: aplay -l
alsamixer -c 1
amixer -c 1
die letzten 2 wären bspw. die 2. Karte. ("amixer" ist tatsächlich "amixer -c 0") Bringt aber für Dein Problem nichts. War jetzt nur kurz zur Erläuterung. Eigentlich sollte es möglich sein dann auch mit Windows gute Aufnahmen hinzubekommen. Was Linux betrifft probiere mal ob mv $HOME/.config/pulse $HOME/.config/pulse_17_5
pulseaudio -k dann Test, was bringt.
|
buzz_lightzyear
(Themenstarter)
Anmeldungsdatum: 8. Juni 2008
Beiträge: 422
|
Hi! Ich hab jetzt wieder die USB-Soundkarte dran und der Output von aplay -l ist folgender: **** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALCS1200A Analog [ALCS1200A Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALCS1200A Digital [ALCS1200A Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 10: HDMI 4 [HDMI 4]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 11: HDMI 5 [HDMI 5]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 12: HDMI 6 [HDMI 6]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: Device [USB Audio Device], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0 Die NVidia-Karte sind denk ich mal die Boxen in meinem neuen Monitor, den ich seit ca. zwei Wochen habe und ich nehme mal stark an, dass card 2 die USB Karte ist. Hier der Output von amixer -c 2: Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 37
Mono:
Front Left: Playback 10 [27%] [-27.00dB] [on]
Front Right: Playback 10 [27%] [-27.00dB] [on]
Simple mixer control 'Mic',0
Capabilities: pvolume pvolume-joined cvolume cvolume-joined pswitch pswitch-joined cswitch cswitch-joined
Playback channels: Mono
Capture channels: Mono
Limits: Playback 0 - 31 Capture 0 - 35
Mono: Playback 16 [52%] [-7.00dB] [off] Capture 33 [94%] [21.00dB] [on]
Simple mixer control 'Auto Gain Control',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on] Was Aufnahmen unter Windows betrifft: die sind auch etwas deutlicher geworden. Was ich bald noch versuchen möchte ist ev ein Bios update... hab schon gelesen, dass das auch das Problem beheben könnte. Thx & Lg
|
realsuamor
Anmeldungsdatum: 16. Mai 2010
Beiträge: 199
Wohnort: Renningen (BaWue)
|
Was Du auch Testen könntest: Alle Mikrofone, die Du unter Pulseaudio-Lautstärkeregler siehst ausschalten. Dann nur ein Mikrofon einschalten (oder ein die Software (bspw. alsa oder pulse plugin), mit der Du das Mikrofon ansteuert). Soweit ich weiß, ist unter Windows immer nur ein Mikrofon aktiviert. Darüberhinaus könntest Du pulseeffects ausprobieren, ob Du über bei die "Limiter" Einstellungen besser Ergebnisse bzgl. des Rauschen bekommst. Habe gerade nochmal gesucht: Lt. einem reddit-Beitrag, wird pulseeffect als "legacy" (also sollte man nicht mehr benutzen) bezeichnet. Stattdessen wird easyeffects empfohlen (ich bin noch auf 20.04, kann das nicht prüfen). Für das Rauschen alleine gibt es rnnoise, das Du mit pulse zusammen betreiben kannst. Ob es ein Ubuntu Paket gibt, da bin ich momentan überfragt. Quelle: https://www.reddit.com/r/voidlinux/comments/ndkw1d/pulseeffects_and_rnnoise/ rnnoise findet sich hier: https://github.com/xiph/rnnoise oder https://gitlab.xiph.org/xiph/rnnoise (ist aber nicht so einfach zu bauen, da es autotools verwendet) Eine Ubuntu Anleitung müsste dazu geschrieben werden. rnnoise sollte aber auf 21.10 laufen.
|