ubuntuusers.de

Hallo,

dies ist mein erster Beitrag hier, ich entschuldige mich falls er noch nicht ganz den Regeln entspricht!

Seit meinem clean install von Kubuntu 26.04 habe ich keinen Ton auf meinen Lautsprechern. Ich habe eine Creative AE7 in Benutzung, die in unter 25.10 zu meiner Zufriedenheit mit dem Alsamixer bedienen konnte. Es ist eine Verlängerung ("Puck") von der Soundkarte zu meinem Schreibtisch angeschlossen (gehört zur Soundkarte dazu), über welchen der Kopfhörer und das Mikrofon angeschlossen sind. Auch das Entfernen des Kopfhörer-Anschlusses aus dem Puck gibt mir keinen Sound, das System meldet dann allerdings, dass überhaupt keine Ausgabemöglichkeit von Sound mehr besteht (obwohl die LS ja noch analog angeschlossen sind).

Onboard-Sound und die HDMI Soundausgabe via GraKa habe ich in der KDE-GUI ausgeschaltet.

Ich kann zwar mit Alsamixer und auch über die GUI von KDE Plasma zwischen Kopfhörer/Lautsprechern hin- und herschalten, allerdings kommt stets nur Sound aus den Kopfhörern.

pavucontrol hat mir auch nicht weitergeholfen.

Ich habe kurz versucht, mit dem hdajackretask zu arbeiten, das Programm ist mir leider aber zu kompliziert. Ich bin auch ratlos, warum die neure Verison von Kubuntu mir die Wiedergabe "kaputt gemacht" hat.

Für Tips bin ich sehr dankbar, viele Grüße!

aplay -l gibt folgende Ausgabe:

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25

**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: Creative [HDA Creative], Gerät 0: CA0132 Analog [CA0132 Analog]
  Sub-Geräte: 0/1
  Sub-Gerät #0: subdevice #0
Karte 0: Creative [HDA Creative], Gerät 1: CA0132 Digital [CA0132 Digital]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 1: HDMI [HDA ATI HDMI], Gerät 3: HDMI 0 [HDMI 0]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 1: HDMI [HDA ATI HDMI], Gerät 7: HDMI 1 [HDMI 1]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 1: HDMI [HDA ATI HDMI], Gerät 8: HDMI 2 [LG ULTRAGEAR]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 1: HDMI [HDA ATI HDMI], Gerät 9: HDMI 3 [BenQ GW2480]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 2: Generic [HD-Audio Generic], Gerät 0: ALC1220 Analog [ALC1220 Analog]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 2: Generic [HD-Audio Generic], Gerät 1: ALC1220 Digital [ALC1220 Digital]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0

Moin @Brausefrosch,

mache mal:(Da Du die Belegung nicht hast)

hdajackretask/Oben Karte wählen/Unten Install boot override

Dann Datei /usr/lib/firmware/hda-jack-retask.fw zu hda-jack-retask-2604.fw kopieren, irgendwo ablegen.

Dann Livestick mit 25.10 starten, Sound testen, dann selbe Prozedur, diese Datei lgw. dann als hda-jack-retask-2510.fw ablegen.

Dann Inhalt vergleichen und hier einstellen.

Hallo Maranto,

vielen Dank für die schnelle Antwort. Ich bin mir leider nicht sicher was du mit "X zu y kopieren" meinst. Soll ich die Datei kopieren, wo anders hin verschieben und dort umbenennen?

VG

Wieso bedeutet "kopieren" bei Dir

kopieren, wo anders hin verschieben und dort umbenennen? ?🙄

Dann so: Erst mal sehen ob sich die Pin Belegung tatsächlich geändert hat, die 2 Dateien sind Textdateien, also kein Thema, Dateien nur sichern, die Namen sind Wurst. Solltest Du Probleme beim Kopieren vom Kubuntu Live System haben(Rechte,ggf. Verschlüsselung Deines User Systems und hast kein Plan) nimm z.B. einen 2. USB Stick, per sudo kopieren, oder Einen der für alle User freigegeben ist oder mit FAT32 formatiert ist.

So @Maranto, hier ist das Ergebnis der Untersuchung:

25.10:

[codec] 0x11020011 0x11020081 1

[pincfg] 0x0b 0x01017010 0x0c 0x014510f0 0x0d 0x414510f0 0x0e 0x01c520f0 0x0f 0x01017114 0x10 0x01017011 0x11 0x018170ff 0x12 0x01a170f0 0x13 0x908700f0 0x18 0x500000f0

26.04:

[codec] 0x11020011 0x11020081 1

[pincfg] 0x0b 0x01017010 0x0c 0x014510f0 0x0d 0x414510f0 0x0e 0x01c520f0 0x0f 0x01017114 0x10 0x01017011 0x11 0x018170ff 0x12 0x01a170f0 0x13 0x908700f0 0x18 0x500000f0

Also wie ich das sehe sind die Ergebnisse identisch. In der 25.10 live Version kamen die Sounds auch völlig unproblematisch aus den Lautsprechern.

Vielleicht ist diese Information noch hilfreich:

ich habe den Befehl "pactl list short sinks" von ChatGPT vorgeschlagen bekommen. Wenn ich ein YouTube Video laufen lasse und dabei die Ausgabe von Kopfhörer auf Lautsprecher ändere, ändert sich im Terminal NICHT das output device:

user@LinuxDesktop:~$ pactl list short sinks
58      alsa_output.pci-0000_0d_00.0.analog-stereo      PipeWire        s32le 2ch 48000Hz       RUNNING
user@LinuxDesktop:~$ pactl list short sinks
58      alsa_output.pci-0000_0d_00.0.analog-stereo      PipeWire        s32le 2ch 48000Hz       RUNNING

Ok, es ist durchaus sinnvoll dann mal die Ausgaben zu vergleichen:(sorry dann muss nochmal auch das Live System ran)

pactl list cards

+ ist die Creative noch "Card 0", ansonsten anpassen (zu sehen mit "aplay -l")

amixer -c0

Es ist nicht verkehrt ChatGPT mit einzubeziehen, gerade bei den Vergleichen, aber mit gewissem Vorbehalt was Lösungen betrifft, kommt auch oft Unsinn.(betrifft alle KI Modelle).

Hallo Maranto,

hier das Ergebnis für pactl list cards, einmal 26.04 (hier ist die Soundkarte, die ich nutze, wohl "card #49"):

pactl list cards
Karte #49
        Name: alsa_card.pci-0000_0d_00.0
        Treiber: alsa
        Owner-Modul: k. A.
        Eigenschaften:
                device.enum.api = "udev"
                device.api = "alsa"
                media.class = "Audio/Device"
                api.alsa.path = "hw:0"
                api.alsa.card = "0"
                api.alsa.card.name = "HDA Creative"
                api.alsa.card.longname = "HDA Creative at 0xfc304000 irq 25"
                device.plugged.usec = "9707166"
                device.bus_path = "pci-0000:0d:00.0"
                sysfs.path = "/devices/pci0000:00/0000:00:01.3/0000:02:00.2/0000:03:04.0/0000:0c:00.0/0000:0d:00.0/sound/card0"
                device.bus = "pci"
                device.subsystem = "sound"
                device.vendor.id = "0x1102"
                device.vendor.name = "Creative Labs"
                device.product.id = "0x0010"
                device.product.name = "CA0132 Sound Core3D [Sound Blaster AE-7] (Sound Blaster AE-7)"
                device.name = "alsa_card.pci-0000_0d_00.0"
                device.description = "CA0132 Sound Core3D [Sound Blaster AE-7] (Sound Blaster AE-7)"
                device.nick = "HDA Creative"
                device.icon_name = "audio-card-analog-pci"
                api.alsa.use-acp = "true"
                api.acp.auto-profile = "false"
                api.acp.auto-port = "false"
                api.dbus.ReserveDevice1.Priority = "-20"
                api.alsa.split-enable = "true"
                api.dbus.ReserveDevice1 = "Audio0"
                spa.object.id = "2"
                factory.id = "15"
                client.id = "40"
                object.id = "49"
                object.serial = "49"
                object.path = "alsa:acp:Creative"
                alsa.card = "0"
                alsa.card_name = "HDA Creative"
                alsa.long_card_name = "HDA Creative at 0xfc304000 irq 25"
                alsa.driver_name = "snd_hda_intel"
                alsa.mixer_name = "Creative Sound Blaster AE-7"
                alsa.components = "HDA:11020011,11020081,00100918"
                alsa.id = "Creative"
                device.string = "0"
        Profile:
                off: Aus (Ziele: 0, Quellen: 0, Priorität: 0, verfügbar: ja)
                output:analog-stereo+input:analog-stereo: Analoges Stereo Duplex (Ziele: 1, Quellen: 1, Priorität: 6565, verfügbar: ja)
                output:analog-stereo: Analoges Stereo-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 6500, verfügbar: ja)
                output:iec958-stereo+input:analog-stereo: Digitales Stereo (IEC958)-Ausgabe + Analoges Stereo-Eingang (Ziele: 1, Quellen: 1, Priorität: 5565, verfügbar: ja)
                output:iec958-stereo: Digitales Stereo (IEC958)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 5500, verfügbar: ja)
                output:analog-surround-21+input:analog-stereo: Analog Surround 2.1-Ausgabe + Analoges Stereo-Eingang (Ziele: 1, Quellen: 1, Priorität: 1365, verfügbar: ja)
                output:analog-surround-41+input:analog-stereo: Analog Surround 4.1-Ausgabe + Analoges Stereo-Eingang (Ziele: 1, Quellen: 1, Priorität: 1365, verfügbar: ja)
                output:analog-surround-51+input:analog-stereo: Analog Surround 5.1-Ausgabe + Analoges Stereo-Eingang (Ziele: 1, Quellen: 1, Priorität: 1365, verfügbar: ja)
                output:analog-surround-21: Analog Surround 2.1-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 1300, verfügbar: ja)
                output:analog-surround-41: Analog Surround 4.1-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 1300, verfügbar: ja)
                output:analog-surround-51: Analog Surround 5.1-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 1300, verfügbar: ja)
                output:analog-surround-40+input:analog-stereo: Analog Surround 4.0-Ausgabe + Analoges Stereo-Eingang (Ziele: 1, Quellen: 1, Priorität: 1265, verfügbar: ja)
                output:analog-surround-50+input:analog-stereo: Analog Surround 5.0-Ausgabe + Analoges Stereo-Eingang (Ziele: 1, Quellen: 1, Priorität: 1265, verfügbar: ja)
                output:analog-surround-40: Analog Surround 4.0-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 1200, verfügbar: ja)
                output:analog-surround-50: Analog Surround 5.0-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 1200, verfügbar: ja)
                output:iec958-ac3-surround-51+input:analog-stereo: Digital Surround 5.1 (IEC958/AC3)-Ausgabe + Analoges Stereo-Eingang (Ziele: 1, Quellen: 1, Priorität: 365, verfügbar: ja)
                output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 300, verfügbar: ja)
                input:analog-stereo: Analoges Stereo-Eingang (Ziele: 0, Quellen: 1, Priorität: 65, verfügbar: ja)
                pro-audio: Pro Audio (Ziele: 2, Quellen: 2, Priorität: 1, verfügbar: ja)
        Aktives Profil: output:analog-stereo+input:analog-stereo
        Ports:
                analog-input-mic: Mikrofon (Typ: Mikro, Priorität: 8700, Latenzversatz: 0 usec, Verfügbarkeitsgruppe: Legacy 1, verfügbar)
                        Eigenschaften:
                                port.type = "mic"
                                port.availability-group = "Legacy 1"
                                device.icon_name = "audio-input-microphone"
                                card.profile.port = "0"
                        Teil der/des Profil(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
                analog-input-linein: Line-Eingang (Typ: Line, Priorität: 8100, Latenzversatz: 0 usec, Verfügbarkeitsgruppe: Legacy 2, verfügbar)
                        Eigenschaften:
                                port.type = "line"
                                port.availability-group = "Legacy 2"
                                card.profile.port = "1"
                        Teil der/des Profil(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
                analog-output-lineout;output-speaker: Line-Ausgang / Lautsprecher (Typ: Line, Priorität: 9010, Latenzversatz: 0 usec, Verfügbarkeitsgruppe: Legacy 3, Verfügbarkeit unbekannt)
                        Eigenschaften:
                                port.type = "line"
                                port.availability-group = "Legacy 3"
                                card.profile.port = "2"
                        Teil der/des Profil(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo
                analog-output-lineout;output-headphones: Line-Ausgang / Kopfhörer (Typ: Line, Priorität: 9009, Latenzversatz: 0 usec, Verfügbarkeitsgruppe: Legacy 3, verfügbar)
                        Eigenschaften:
                                port.type = "line"
                                port.availability-group = "Legacy 3"
                                card.profile.port = "3"
                        Teil der/des Profil(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo
                iec958-stereo-output: Digitalausgang (S/PDIF) (Typ: SPDIF, Priorität: 0, Latenzversatz: 0 usec, Verfügbarkeit unbekannt)
                        Eigenschaften:
                                port.type = "spdif"
                                card.profile.port = "4"
                        Teil der/des Profil(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo

Karte #50
        Name: alsa_card.pci-0000_11_00.1
        Treiber: alsa
        Owner-Modul: k. A.
        Eigenschaften:
                device.enum.api = "udev"
                device.api = "alsa"
                media.class = "Audio/Device"
                api.alsa.path = "hw:1"
                api.alsa.card = "1"
                api.alsa.card.name = "HDA ATI HDMI"
                api.alsa.card.longname = "HDA ATI HDMI at 0xfcda0000 irq 101"
                device.plugged.usec = "7389522"
                device.bus_path = "pci-0000:11:00.1"
                sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:0f:00.0/0000:10:00.0/0000:11:00.1/sound/card1"
                device.bus = "pci"
                device.subsystem = "sound"
                device.vendor.id = "0x1002"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
                device.product.id = "0xab40"
                device.product.name = "Navi 48 HDMI/DP Audio Controller"
                device.name = "alsa_card.pci-0000_11_00.1"
                device.description = "Navi 48 HDMI/DP Audio Controller"
                device.nick = "HDA ATI HDMI"
                device.icon_name = "audio-card-analog-pci"
                api.alsa.use-acp = "true"
                api.acp.auto-profile = "false"
                api.acp.auto-port = "false"
                api.dbus.ReserveDevice1.Priority = "-20"
                api.alsa.split-enable = "true"
                api.dbus.ReserveDevice1 = "Audio1"
                spa.object.id = "4"
                factory.id = "15"
                client.id = "40"
                object.id = "50"
                object.serial = "50"
                object.path = "alsa:acp:HDMI"
                alsa.card = "1"
                alsa.card_name = "HDA ATI HDMI"
                alsa.long_card_name = "HDA ATI HDMI at 0xfcda0000 irq 101"
                alsa.driver_name = "snd_hda_intel"
                alsa.mixer_name = "ATI R6xx HDMI"
                alsa.components = "HDA:1002aa01,00aa0100,00100a00"
                alsa.id = "HDMI"
                device.string = "1"
        Profile:
                off: Aus (Ziele: 0, Quellen: 0, Priorität: 0, verfügbar: ja)
                output:hdmi-stereo: Digitales Stereo (HDMI)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 5900, verfügbar: nein)
                output:hdmi-stereo-extra1: Digital Stereo (HDMI 2)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 5700, verfügbar: nein)
                output:hdmi-stereo-extra2: Digital Stereo (HDMI 3)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 5700, verfügbar: ja)
                output:hdmi-stereo-extra3: Digital Stereo (HDMI 4)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 5700, verfügbar: ja)
                output:hdmi-surround: Digital Surround 5.1 (HDMI)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 800, verfügbar: nein)
                output:hdmi-surround71: Digital Surround 7.1 (HDMI)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 800, verfügbar: nein)
                output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 600, verfügbar: nein)
                output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 600, verfügbar: nein)
                pro-audio: Pro Audio (Ziele: 4, Quellen: 0, Priorität: 1, verfügbar: ja)
        Aktives Profil: off
        Ports:
                hdmi-output-0: HDMI / DisplayPort (Typ: HDMI, Priorität: 5900, Latenzversatz: 0 usec, Verfügbarkeitsgruppe: Legacy 1, nicht verfügbar)
                        Eigenschaften:
                                port.type = "hdmi"
                                port.availability-group = "Legacy 1"
                                device.icon_name = "video-display"
                                card.profile.port = "0"
                        Teil der/des Profil(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
                hdmi-output-1: HDMI / DisplayPort 2 (Typ: HDMI, Priorität: 5800, Latenzversatz: 0 usec, Verfügbarkeitsgruppe: Legacy 2, nicht verfügbar)
                        Eigenschaften:
                                port.type = "hdmi"
                                port.availability-group = "Legacy 2"
                                device.icon_name = "video-display"
                                card.profile.port = "1"
                        Teil der/des Profil(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
                hdmi-output-2: HDMI / DisplayPort 3 (Typ: HDMI, Priorität: 5700, Latenzversatz: 0 usec, Verfügbarkeitsgruppe: Legacy 3, verfügbar)
                        Eigenschaften:
                                port.type = "hdmi"
                                port.availability-group = "Legacy 3"
                                device.icon_name = "video-display"
                                card.profile.port = "2"
                                device.product.name = "LG ULTRAGEAR"
                                iec958.codecs.detected = "[\"PCM\"]"
                                audio.channels.detected = "2"
                                audio.position.detected = "[FL,FR]"
                        Teil der/des Profil(s): output:hdmi-stereo-extra2
                hdmi-output-3: HDMI / DisplayPort 4 (Typ: HDMI, Priorität: 5600, Latenzversatz: 0 usec, Verfügbarkeitsgruppe: Legacy 4, verfügbar)
                        Eigenschaften:
                                port.type = "hdmi"
                                port.availability-group = "Legacy 4"
                                device.icon_name = "video-display"
                                card.profile.port = "3"
                                device.product.name = "BenQ GW2480"
                                iec958.codecs.detected = "[\"PCM\"]"
                                audio.channels.detected = "2"
                                audio.position.detected = "[FL,FR]"
                        Teil der/des Profil(s): output:hdmi-stereo-extra3

Karte #51
        Name: alsa_card.pci-0000_13_00.4
        Treiber: alsa
        Owner-Modul: k. A.
        Eigenschaften:
                device.enum.api = "udev"
                device.api = "alsa"
                media.class = "Audio/Device"
                api.alsa.path = "hw:2"
                api.alsa.card = "2"
                api.alsa.card.name = "HD-Audio Generic"
                api.alsa.card.longname = "HD-Audio Generic at 0xfcc00000 irq 102"
                device.plugged.usec = "7415517"
                device.bus_path = "pci-0000:13:00.4"
                sysfs.path = "/devices/pci0000:00/0000Code:00:08.1/0000:13:00.4/sound/card2"
                device.bus = "pci"
                device.subsystem = "sound"
                device.vendor.id = "0x1022"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
                device.product.id = "0x1487"
                device.product.name = "Starship/Matisse HD Audio Controller"
                device.name = "alsa_card.pci-0000_13_00.4"
                device.description = "Starship/Matisse HD Audio Controller"
                device.nick = "HD-Audio Generic"
                device.icon_name = "audio-card-analog-pci"
                api.alsa.use-acp = "true"
                api.acp.auto-profile = "false"
                api.acp.auto-port = "false"
                api.dbus.ReserveDevice1.Priority = "-20"
                api.alsa.split-enable = "true"
                api.dbus.ReserveDevice1 = "Audio2"
                spa.object.id = "6"
                factory.id = "15"
                client.id = "40"
                object.id = "51"
                object.serial = "51"
                object.path = "alsa:acp:Generic"
                alsa.card = "2"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xfcc00000 irq 102"
                alsa.driver_name = "snd_hda_intel"
                alsa.mixer_name = "Realtek ALC1220"
                alsa.components = "HDA:10ec1220,18492221,00100101"
                alsa.id = "Generic"
                device.string = "2"
        Profile:
                off: Aus (Ziele: 0, Quellen: 0, Priorität: 0, verfügbar: ja)
                output:analog-stereo+input:analog-stereo: Analoges Stereo Duplex (Ziele: 1, Quellen: 1, Priorität: 6565, verfügbar: nein)
                output:analog-stereo: Analoges Stereo-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 6500, verfügbar: nein)
                output:iec958-stereo+input:analog-stereo: Digitales Stereo (IEC958)-Ausgabe + Analoges Stereo-Eingang (Ziele: 1, Quellen: 1, Priorität: 5565, verfügbar: ja)
                output:iec958-stereo: Digitales Stereo (IEC958)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 5500, verfügbar: ja)
                output:analog-surround-21+input:analog-stereo: Analog Surround 2.1-Ausgabe + Analoges Stereo-Eingang (Ziele: 1, Quellen: 1, Priorität: 1365, verfügbar: nein)
                output:analog-surround-41+input:analog-stereo: Analog Surround 4.1-Ausgabe + Analoges Stereo-Eingang (Ziele: 1, Quellen: 1, Priorität: 1365, verfügbar: nein)
                output:analog-surround-51+input:analog-stereo: Analog Surround 5.1-Ausgabe + Analoges Stereo-Eingang (Ziele: 1, Quellen: 1, Priorität: 1365, verfügbar: nein)
                output:analog-surround-21: Analog Surround 2.1-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 1300, verfügbar: nein)
                output:analog-surround-41: Analog Surround 4.1-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 1300, verfügbar: nein)
                output:analog-surround-51: Analog Surround 5.1-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 1300, verfügbar: nein)
                output:analog-surround-40+input:analog-stereo: Analog Surround 4.0-Ausgabe + Analoges Stereo-Eingang (Ziele: 1, Quellen: 1, Priorität: 1265, verfügbar: nein)
                output:analog-surround-50+input:analog-stereo: Analog Surround 5.0-Ausgabe + Analoges Stereo-Eingang (Ziele: 1, Quellen: 1, Priorität: 1265, verfügbar: nein)
                output:analog-surround-40: Analog Surround 4.0-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 1200, verfügbar: nein)
                output:analog-surround-50: Analog Surround 5.0-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 1200, verfügbar: nein)
                output:iec958-ac3-surround-51+input:analog-stereo: Digital Surround 5.1 (IEC958/AC3)-Ausgabe + Analoges Stereo-Eingang (Ziele: 1, Quellen: 1, Priorität: 365, verfügbar: nein)
                output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3)-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 300, verfügbar: ja)
                input:analog-stereo: Analoges Stereo-Eingang (Ziele: 0, Quellen: 1, Priorität: 65, verfügbar: nein)
                pro-audio: Pro Audio (Ziele: 2, Quellen: 2, Priorität: 1, verfügbar: ja)
        Aktives Profil: off
        Ports:
                analog-input-front-mic: Vorderes Mikrofon (Typ: Mikro, Priorität: 8500, Latenzversatz: 0 usec, Verfügbarkeitsgruppe: Legacy 1, nicht verfügbar)
                        Eigenschaften:
                                port.type = "mic"
                                port.availability-group = "Legacy 1"
                                device.icon_name = "audio-input-microphone"
                                card.profile.port = "0"
                        Teil der/des Profil(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
                analog-input-rear-mic: Rückwärtiges Mikrofon (Typ: Mikro, Priorität: 8200, Latenzversatz: 0 usec, Verfügbarkeitsgruppe: Legacy 2, nicht verfügbar)
                        Eigenschaften:
                                port.type = "mic"
                                port.availability-group = "Legacy 2"
                                device.icon_name = "audio-input-microphone"
                                card.profile.port = "1"
                        Teil der/des Profil(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
                analog-input-linein: Line-Eingang (Typ: Line, Priorität: 8100, Latenzversatz: 0 usec, Verfügbarkeitsgruppe: Legacy 3, nicht verfügbar)
                        Eigenschaften:
                                port.type = "line"
                                port.availability-group = "Legacy 3"
                                card.profile.port = "2"
                        Teil der/des Profil(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
                analog-output-lineout: Line-Ausgang (Typ: Line, Priorität: 9000, Latenzversatz: 0 usec, Verfügbarkeitsgruppe: Legacy 4, nicht verfügbar)
                        Eigenschaften:
                                port.type = "line"
                                port.availability-group = "Legacy 4"
                                card.profile.port = "3"
                        Teil der/des Profil(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo
                analog-output-headphones: Kopfhörer (Typ: Kopfhörer, Priorität: 9900, Latenzversatz: 0 usec, Verfügbarkeitsgruppe: Legacy 5, nicht verfügbar)
                        Eigenschaften:
                                port.type = "headphones"
                                port.availability-group = "Legacy 5"
                                device.icon_name = "audio-headphones"
                                card.profile.port = "4"
                        Teil der/des Profil(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
                iec958-stereo-output: Digitalausgang (S/PDIF) (Typ: SPDIF, Priorität: 0, Latenzversatz: 0 usec, Verfügbarkeit unbekannt)
                        Eigenschaften:
                                port.type = "spdif"
                                card.profile.port = "5"
                        Teil der/des Profil(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo

und hier 25.10 (hier ist es wohl "card #97"):

actl list cards
Card #96
        Name: alsa_card.pci-0000_13_00.4
        Driver: alsa
        Owner Module: n/a
        Properties:
                api.acp.auto-port = "false"
                api.acp.auto-profile = "false"
                api.alsa.card = "2"
                api.alsa.card.longname = "HD-Audio Generic at 0xfcc00000 irq 102"
                api.alsa.card.name = "HD-Audio Generic"
                api.alsa.path = "hw:2"
                api.alsa.split-enable = "true"
                api.alsa.use-acp = "true"
                api.dbus.ReserveDevice1 = "Audio2"
                api.dbus.ReserveDevice1.Priority = "-20"
                device.api = "alsa"
                device.bus = "pci"
                device.bus_path = "pci-0000:13:00.4"
                device.description = "Starship/Matisse HD Audio Controller"
                device.enum.api = "udev"
                device.icon_name = "audio-card-analog-pci"
                device.name = "alsa_card.pci-0000_13_00.4"
                device.nick = "HD-Audio Generic"
                device.plugged.usec = "13231058"
                device.product.id = "0x1487"
                device.product.name = "Starship/Matisse HD Audio Controller"
                device.subsystem = "sound"
                sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:13:00.4/sound/card2"
                device.vendor.id = "0x1022"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
                media.class = "Audio/Device"
                spa.object.id = "6"
                factory.id = "15"
                client.id = "47"
                object.id = "72"
                object.serial = "96"
                object.path = "alsa:acp:Generic"
                alsa.card = "2"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xfcc00000 irq 102"
                alsa.driver_name = "snd_hda_intel"
                alsa.mixer_name = "Realtek ALC1220"
                alsa.components = "HDA:10ec1220,18492221,00100101"
                alsa.id = "Generic"
                device.string = "2"
        Profiles:
                off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
                output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: no)
                output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: no)
                output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5565, available: yes)
                output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
                output:analog-surround-21+input:analog-stereo: Analog Surround 2.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
                output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
                output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
                output:analog-surround-21: Analog Surround 2.1 Output (sinks: 1, sources: 0, priority: 1300, available: no)
                output:analog-surround-41: Analog Surround 4.1 Output (sinks: 1, sources: 0, priority: 1300, available: no)
                output:analog-surround-51: Analog Surround 5.1 Output (sinks: 1, sources: 0, priority: 1300, available: no)
                output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: no)
                output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: no)
                output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 1200, available: no)
                output:analog-surround-50: Analog Surround 5.0 Output (sinks: 1, sources: 0, priority: 1200, available: no)
                input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: no)
                pro-audio: Pro Audio (sinks: 2, sources: 2, priority: 1, available: yes)
        Active Profile: output:iec958-stereo+input:analog-stereo
        Ports:
                analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, latency offset: 0 usec, availability group: Legacy 1, not available)
                        Properties:
                                port.type = "mic"
                                port.availability-group = "Legacy 1"
                                device.icon_name = "audio-input-microphone"
                                card.profile.port = "0"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
                analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, latency offset: 0 usec, availability group: Legacy 2, not available)
                        Properties:
                                port.type = "mic"
                                port.availability-group = "Legacy 2"
                                device.icon_name = "audio-input-microphone"
                                card.profile.port = "1"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
                analog-input-linein: Line In (type: Line, priority: 8100, latency offset: 0 usec, availability group: Legacy 3, not available)
                        Properties:
                                port.type = "line"
                                port.availability-group = "Legacy 3"
                                card.profile.port = "2"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
                analog-output-lineout: Line Out (type: Line, priority: 9000, latency offset: 0 usec, availability group: Legacy 4, not available)
                        Properties:
                                port.type = "line"
                                port.availability-group = "Legacy 4"
                                card.profile.port = "3"
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo
                analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 5, not available)
                        Properties:
                                port.type = "headphones"
                                port.availability-group = "Legacy 5"
                                device.icon_name = "audio-headphones"
                                card.profile.port = "4"
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
                iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
                        Properties:
                                port.type = "spdif"
                                card.profile.port = "5"
                        Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo

Card #97
        Name: alsa_card.pci-0000_0d_00.0
        Driver: alsa
        Owner Module: n/a
        Properties:
                api.acp.auto-port = "false"
                api.acp.auto-profile = "false"
                api.alsa.card = "0"
                api.alsa.card.longname = "HDA Creative at 0xfc304000 irq 25"
                api.alsa.card.name = "HDA Creative"
                api.alsa.path = "hw:0"
                api.alsa.split-enable = "true"
                api.alsa.use-acp = "true"
                api.dbus.ReserveDevice1 = "Audio0"
                api.dbus.ReserveDevice1.Priority = "-20"
                device.api = "alsa"
                device.bus = "pci"
                device.bus_path = "pci-0000:0d:00.0"
                device.description = "CA0132 Sound Core3D [Sound Blaster AE-7] (Sound Blaster AE-7)"
                device.enum.api = "udev"
                device.icon_name = "audio-card-analog-pci"
                device.name = "alsa_card.pci-0000_0d_00.0"
                device.nick = "HDA Creative"
                device.plugged.usec = "15853167"
                device.product.id = "0x0010"
                device.product.name = "CA0132 Sound Core3D [Sound Blaster AE-7] (Sound Blaster AE-7)"
                device.subsystem = "sound"
                sysfs.path = "/devices/pci0000:00/0000:00:01.3/0000:02:00.2/0000:03:04.0/0000:0c:00.0/0000:0d:00.0/sound/card0"
                device.vendor.id = "0x1102"
                device.vendor.name = "Creative Labs"
                media.class = "Audio/Device"
                spa.object.id = "2"
                factory.id = "15"
                client.id = "47"
                object.id = "71"
                object.serial = "97"
                object.path = "alsa:acp:Creative"
                alsa.card = "0"
                alsa.card_name = "HDA Creative"
                alsa.long_card_name = "HDA Creative at 0xfc304000 irq 25"
                alsa.driver_name = "snd_hda_intel"
                alsa.mixer_name = "Creative Sound Blaster AE-7"
                alsa.components = "HDA:11020011,11020081,00100918"
                alsa.id = "Creative"
                device.string = "0"
        Profiles:
                off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
                output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: yes)
                output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes)
                output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5565, available: yes)
                output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
                output:analog-surround-21+input:analog-stereo: Analog Surround 2.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: yes)
                output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: yes)
                output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: yes)
                output:analog-surround-21: Analog Surround 2.1 Output (sinks: 1, sources: 0, priority: 1300, available: yes)
                output:analog-surround-41: Analog Surround 4.1 Output (sinks: 1, sources: 0, priority: 1300, available: yes)
                output:analog-surround-51: Analog Surround 5.1 Output (sinks: 1, sources: 0, priority: 1300, available: yes)
                output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: yes)
                output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: yes)
                output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 1200, available: yes)
                output:analog-surround-50: Analog Surround 5.0 Output (sinks: 1, sources: 0, priority: 1200, available: yes)
                input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
                pro-audio: Pro Audio (sinks: 2, sources: 2, priority: 1, available: yes)
        Active Profile: output:analog-stereo+input:analog-stereo
        Ports:
                analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability group: Legacy 1, available)
                        Properties:
                                port.type = "mic"
                                port.availability-group = "Legacy 1"
                                device.icon_name = "audio-input-microphone"
                                card.profile.port = "0"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
                analog-input-linein: Line In (type: Line, priority: 8100, latency offset: 0 usec, availability group: Legacy 2, available)
                        Properties:
                                port.type = "line"
                                port.availability-group = "Legacy 2"
                                card.profile.port = "1"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
                analog-output-lineout;output-speaker: Line Out / Speaker (type: Line, priority: 9010, latency offset: 0 usec, availability group: Legacy 3, availability unknown)
                        Properties:
                                port.type = "line"
                                port.availability-group = "Legacy 3"
                                card.profile.port = "2"
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo
                analog-output-lineout;output-headphones: Line Out / Headphones (type: Line, priority: 9009, latency offset: 0 usec, availability group: Legacy 3, available)
                        Properties:
                                port.type = "line"
                                port.availability-group = "Legacy 3"
                                card.profile.port = "3"
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo
                iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
                        Properties:
                                port.type = "spdif"
                                card.profile.port = "4"
                        Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo

Card #98
        Name: alsa_card.pci-0000_11_00.1
        Driver: alsa
        Owner Module: n/a
        Properties:
                api.acp.auto-port = "false"
                api.acp.auto-profile = "false"
                api.alsa.card = "1"
                api.alsa.card.longname = "HDA ATI HDMI at 0xfcda0000 irq 101"
                api.alsa.card.name = "HDA ATI HDMI"
                api.alsa.path = "hw:1"
                api.alsa.split-enable = "true"
                api.alsa.use-acp = "true"
                api.dbus.ReserveDevice1 = "Audio1"
                api.dbus.ReserveDevice1.Priority = "-20"
                device.api = "alsa"
                device.bus = "pci"
                device.bus_path = "pci-0000:11:00.1"
                device.description = "Navi 48 HDMI/DP Audio Controller"
                device.enum.api = "udev"
                device.icon_name = "audio-card-analog-pci"
                device.name = "alsa_card.pci-0000_11_00.1"
                device.nick = "HDA ATI HDMI"
                device.plugged.usec = "13218966"
                device.product.id = "0xab40"
                device.product.name = "Navi 48 HDMI/DP Audio Controller"
                device.subsystem = "sound"
                sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:0f:00.0/0000:10:00.0/0000:11:00.1/sound/card1"
                device.vendor.id = "0x1002"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
                media.class = "Audio/Device"
                spa.object.id = "4"
                factory.id = "15"
                client.id = "47"
                object.id = "50"
                object.serial = "98"
                object.path = "alsa:acp:HDMI"
                alsa.card = "1"
                alsa.card_name = "HDA ATI HDMI"
                alsa.long_card_name = "HDA ATI HDMI at 0xfcda0000 irq 101"
                alsa.driver_name = "snd_hda_intel"
                alsa.mixer_name = "ATI R6xx HDMI"
                alsa.components = "HDA:1002aa01,00aa0100,00100a00"
                alsa.id = "HDMI"
                device.string = "1"
        Profiles:
                off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
                output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
                output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: yes)
                output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: yes)
                output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
                output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
                output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
                pro-audio: Pro Audio (sinks: 4, sources: 0, priority: 1, available: yes)
        Active Profile: output:hdmi-stereo-extra2
        Ports:
                hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, not available)
                        Properties:
                                port.type = "hdmi"
                                port.availability-group = "Legacy 1"
                                device.icon_name = "video-display"
                                card.profile.port = "0"
                        Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
                hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, not available)
                        Properties:
                                port.type = "hdmi"
                                port.availability-group = "Legacy 2"
                                device.icon_name = "video-display"
                                card.profile.port = "1"
                        Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
                hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, available)
                        Properties:
                                port.type = "hdmi"
                                port.availability-group = "Legacy 3"
                                device.icon_name = "video-display"
                                card.profile.port = "2"
                                device.product.name = "LG ULTRAGEAR"
                                iec958.codecs.detected = "[\"PCM\"]"
                        Part of profile(s): output:hdmi-stereo-extra2
                hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, available)
                        Properties:
                                port.type = "hdmi"
                                port.availability-group = "Legacy 4"
                                device.icon_name = "video-display"
                                card.profile.port = "3"
                                device.product.name = "BenQ GW2480"
                                iec958.codecs.detected = "[\"PCM\"]"
                        Part of profile(s): output:hdmi-stereo-extra3

amixer -c0 unter 26.04 ergibt:

amixer -c0
Simple mixer control 'Master',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 99
  Mono: Playback 90 [91%] [-9.00dB] [on]
Simple mixer control 'Bass Redirection',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'Bass Redirection Crossover',0
  Capabilities: volume volume-joined
  Playback channels: Mono
  Capture channels: Mono
  Limits: 1 - 100
  Mono: 8 [7%]
Simple mixer control 'PCM',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%] [0.00dB]
  Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Front',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 99
  Mono:
  Front Left: Playback 90 [91%] [0.00dB] [on]
  Front Right: Playback 90 [91%] [0.00dB] [on]
Simple mixer control 'Surround',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 99
  Mono:
  Front Left: Playback 90 [91%] [0.00dB] [on]
  Front Right: Playback 90 [91%] [0.00dB] [on]
Simple mixer control 'Surround Channel Config',0
  Capabilities: enum
  Items: '2.0' '2.1' '4.0' '4.1' '5.1'
  Item0: '2.0'
Simple mixer control 'Center',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 99
  Mono: Playback 90 [91%] [0.00dB] [on]
Simple mixer control 'LFE',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 99
  Mono: Playback 90 [91%] [0.00dB] [on]
Simple mixer control 'Mic Boost',0
  Capabilities: cenum
  Items: '0 dB' '10 dB' '20 dB' '30 dB'
  Item0: '10 dB'
Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'IEC958 Default PCM',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 99
  Front Left: Capture 99 [100%] [9.00dB] [on]
  Front Right: Capture 99 [100%] [9.00dB] [on]
Simple mixer control 'AE-5: Headphone Gain',0
  Capabilities: enum
  Items: 'Low (16-31  Ohms)' 'Medium (32-149  Ohms)' 'High (150-600  Ohms)'
  Item0: 'High (150-600  Ohms)'
Simple mixer control 'AE-5: Sound Filter',0
  Capabilities: enum
  Items: 'Slow Roll Off' 'Minimum Phase' 'Fast Roll Off'
  Item0: 'Fast Roll Off'
Simple mixer control 'EQ Band0',0
  Capabilities: pvolume pvolume-joined
  Playback channels: Mono
  Limits: Playback 0 - 48
  Mono: Playback 24 [50%] [0.00dB]
Simple mixer control 'EQ Band1',0
  Capabilities: pvolume pvolume-joined
  Playback channels: Mono
  Limits: Playback 0 - 48
  Mono: Playback 24 [50%] [0.00dB]
Simple mixer control 'EQ Band2',0
  Capabilities: pvolume pvolume-joined
  Playback channels: Mono
  Limits: Playback 0 - 48
  Mono: Playback 24 [50%] [0.00dB]
Simple mixer control 'EQ Band3',0
  Capabilities: pvolume pvolume-joined
  Playback channels: Mono
  Limits: Playback 0 - 48
  Mono: Playback 24 [50%] [0.00dB]
Simple mixer control 'EQ Band4',0
  Capabilities: pvolume pvolume-joined
  Playback channels: Mono
  Limits: Playback 0 - 48
  Mono: Playback 24 [50%] [0.00dB]
Simple mixer control 'EQ Band5',0
  Capabilities: pvolume pvolume-joined
  Playback channels: Mono
  Limits: Playback 0 - 48
  Mono: Playback 24 [50%] [0.00dB]
Simple mixer control 'EQ Band6',0
  Capabilities: pvolume pvolume-joined
  Playback channels: Mono
  Limits: Playback 0 - 48
  Mono: Playback 24 [50%] [0.00dB]
Simple mixer control 'EQ Band7',0
  Capabilities: pvolume pvolume-joined
  Playback channels: Mono
  Limits: Playback 0 - 48
  Mono: Playback 24 [50%] [0.00dB]
Simple mixer control 'EQ Band8',0
  Capabilities: pvolume pvolume-joined
  Playback channels: Mono
  Limits: Playback 0 - 48
  Mono: Playback 24 [50%] [0.00dB]
Simple mixer control 'EQ Band9',0
  Capabilities: pvolume pvolume-joined
  Playback channels: Mono
  Limits: Playback 0 - 48
  Mono: Playback 24 [50%] [0.00dB]
Simple mixer control 'Enable InFX',0
  Capabilities: cswitch cswitch-joined
  Capture channels: Mono
  Mono: Capture [off]
Simple mixer control 'Enable OutFX',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'FX: Crystalizer',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 100
  Mono: Playback 0 [0%] [on]
Simple mixer control 'FX: Dialog Plus',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 100
  Mono: Playback 0 [0%] [on]
Simple mixer control 'FX: Equalizer',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'FX: Equalizer Preset',0
  Capabilities: enum
  Items: 'Flat' 'Acoustic' 'Classical' 'Country' 'Dance' 'Jazz' 'New Age' 'Pop' 'Rock' 'Vocal'
  Item0: 'Flat'
Simple mixer control 'FX: Mic SVM',0
  Capabilities: cswitch cswitch-joined
  Capture channels: Mono
  Mono: Capture [on]
Simple mixer control 'FX: Noise Reduction',0
  Capabilities: cswitch cswitch-joined
  Capture channels: Mono
  Mono: Capture [on]
Simple mixer control 'FX: Smart Volume',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 100
  Mono: Playback 0 [0%] [on]
Simple mixer control 'FX: Smart Volume Setting',0
  Capabilities: enum
  Items: 'Normal' 'Loud' 'Night'
  Item0: 'Normal'
Simple mixer control 'FX: Surround',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 100
  Mono: Playback 0 [0%] [off]
Simple mixer control 'FX: Voice Focus',0
  Capabilities: cswitch cswitch-joined
  Capture channels: Mono
  Mono: Capture [on]
Simple mixer control 'FX: X-Bass',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 100
  Mono: Playback 0 [0%] [on]
Simple mixer control 'FX: X-Bass Crossover',0
  Capabilities: pvolume pvolume-joined
  Playback channels: Mono
  Limits: Playback 1 - 100
  Mono: Playback 1 [0%]
Simple mixer control 'Full-Range Front Speakers',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'Full-Range Rear Speakers',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'HP/Speaker Auto Detect',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'Input Source',0
  Capabilities: cenum
  Items: 'Microphone' 'Line In' 'Front Microphone'
  Item0: 'Microphone'
Simple mixer control 'Output Select',0
  Capabilities: enum
  Items: 'Speakers' 'Headphone'
  Item0: 'Headphone'
Simple mixer control 'SVM Level',0
  Capabilities: cvolume cvolume-joined
  Capture channels: Mono
  Limits: Capture 0 - 100
  Mono: Capture 74 [74%]
Simple mixer control 'VoiceFX',0
  Capabilities: cenum
  Items: 'Neutral' 'Female2Male' 'Male2Female' 'ScrappyKid' 'Elderly' 'Orc' 'Elf' 'Dwarf' 'AlienBrute' 'Robot' 'Marine' 'Emo' 'DeepVoice' 'Munchkin'
  Item0: 'Neutral'
Simple mixer control 'Wedge Angle',0
  Capabilities: cvolume cvolume-joined
  Capture channels: Mono
  Limits: Capture 20 - 180
  Mono: Capture 11 [-6%] [11.00dB]
Simple mixer control 'What U Hear',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 99
  Front Left: Capture 90 [91%] [0.00dB] [on]
  Front Right: Capture 90 [91%] [0.00dB] [on]

Spasseshalber habe ich auch mal die live Version von Bazzite probiert - auch hier kein Problem beim umschalten auf die Lautsprecher!

Ich kann zwar mit Alsamixer und .... zwischen Kopfhörer/Lautsprechern hin- und herschalten, allerdings kommt stets nur Sound aus den Kopfhörern.

Meinst Du Das:?, Wenn ja, s. Unten.

Probiere mal Das umzuschalten: (steht momentan auf 'Headphone')

Simple mixer control 'Output Select',0
  Capabilities: enum
  Items: 'Speakers' 'Headphone'
  Item0: 'Headphone'

• Entweder im ALSAMixer (weit Rechts)

• oder geht auch per

amixer -c0 set 'Output Select' Speakers

Statusabfrage mit:

amixer -c0 get 'Output Select'

–

Keine Besserung, dann poste vom 26.04 die Ausgabe

cat /proc/asound/card0/codec#0

Und..

Würde auch mal mit "Pro Audio" Profil Karte testen. "pavucontrol -t 5"

Also hier die Ergebnisse deiner Kommandozeilen:

amixer -c0 set 'Output Select' Speakers


Simple mixer control 'Output Select',0
  Capabilities: enum
  Items: 'Speakers' 'Headphone'
  Item0: 'Speakers'

amixer -c0 get 'Output Select'
Simple mixer control 'Output Select',0
  Capabilities: enum
  Items: 'Speakers' 'Headphone'
  Item0: 'Speakers'

cat /proc/asound/card0/codec#0
cat: /proc/asound/card0/codec#0: No such file or directory

wenn ich pavucontrol starte, kommt im Terminal folgende Meldung (und zwar jedes Mal, wenn ich dort eine Eingabe mache/Änderungen vornehme):

WARNING: radv is not a conformant Vulkan implementation, testing use only.

(pavucontrol:11250): Gtk-WARNING **: 09:35:09.182: GtkGizmo 0x650f8720b180 (slider) reported min width -2, but sizes must be >= 0

Die Pavucontrol Warnungen kannst Du ignorieren. Gehören nicht zum Audio Problem.

cat: /proc/asound/card0/codec#0: No such file or directory

Das ist allerdings ein Problem. Stelle mal wieder auf 'Headphone' dann nochmal als Test:

cat /proc/asound/card0/codec#0
#oder Alles
cat /proc/asound/card*/codec#*

Geht Das, dann in Pavucontrol auf "Pro Audio" der Karte umstellen und testen.

Dann ist hier noch eine Einstellung:

Simple mixer control 'HP/Speaker Auto Detect',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]

Momentan auf Automatic. Schalte das mal aus und testen.

–

Hilft nix, poste mal noch die Ausgaben vom 25.10

amixer -c0
cat /proc/asound/card*/codec#*

Wenn man sich im Netz Threads mit dem selben/ä. Problem der Karte ansieht, dann artet das offb. in reines Herumprobieren aus. 🙄

Auch das Entfernen des Kopfhörer-Anschlusses aus dem Puck gibt mir keinen Sound, das System meldet dann allerdings, dass überhaupt keine Ausgabemöglichkeit von Sound mehr besteht (obwohl die LS ja noch analog angeschlossen sind).

Normalerweise sollte die Jack Erkennung dafür sorgen, daß umgeschalten wird, oder manuell? Die Karte lässt sich doch sicher auch ohne den Puck betreiben, könnte die Diagnose einfacher machen.

Maranto schrieb:

Die Pavucontrol Warnungen kannst Du ignorieren. Gehören nicht zum Audio Problem.

cat: /proc/asound/card0/codec#0: No such file or directory

Das ist allerdings ein Problem. Stelle mal wieder auf 'Headphone' dann nochmal als Test:

cat /proc/asound/card0/codec#0
#oder Alles
cat /proc/asound/card*/codec#*

Geht Das, dann in Pavucontrol auf "Pro Audio" der Karte umstellen und testen.

Unabhängig von der Einstellung Kopfhörer/Lautsprecher ergibt die Kommandozeile "cat /proc/asound/card0/codec#0 " wieder folgenden Output:

cat: /proc/asound/card0/codec#0: No such file or directory

Das Kommando "cat /proc/asound/card*/codec#*"

ergibt

Codec: Creative Sound Blaster AE-7
Address: 1
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x11020011
Subsystem Id: 0x11020081
Revision Id: 0x100918
No Modem Function Group found
Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
  Power states:  D0 D3 D3cold S3D3cold CLKSTOP EPSS
  Power: setting=D0, actual=D0
GPIO: io=3, o=0, i=0, unsolicited=1, wake=1
  IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x49d: Stereo Amp-Out
  Control: name="Front Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Device: name="CA0132 Analog", type="Audio", device=0
  Amp-Out caps: ofs=0x5a, nsteps=0x63, stepsize=0x03, mute=1
  Amp-Out vals:  [0x4f 0x4f]
  Converter: stream=5, channel=0
  PCM:
    rates [0x1e4]: 16000 44100 48000 88200 96000
    bits [0xa]: 16 24
    formats [0x1]: PCM
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x49d: Stereo Amp-Out
  Control: name="Center Playback Volume", index=0, device=0
    ControlAmp: chs=1, dir=Out, idx=0, ofs=0
  Control: name="Center Playback Switch", index=0, device=0
    ControlAmp: chs=1, dir=Out, idx=0, ofs=0
  Control: name="LFE Playback Volume", index=0, device=0
    ControlAmp: chs=2, dir=Out, idx=0, ofs=0
  Control: name="LFE Playback Switch", index=0, device=0
    ControlAmp: chs=2, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x5a, nsteps=0x63, stepsize=0x03, mute=1
  Amp-Out vals:  [0x4f 0x4f]
  Converter: stream=0, channel=0
  PCM:
    rates [0x1e4]: 16000 44100 48000 88200 96000
    bits [0xa]: 16 24
    formats [0x1]: PCM
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x49d: Stereo Amp-Out
  Control: name="Surround Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Control: name="Surround Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x5a, nsteps=0x63, stepsize=0x03, mute=1
  Amp-Out vals:  [0x4f 0x4f]
  Converter: stream=0, channel=0
  PCM:
    rates [0x5ec]: 16000 22050 44100 48000 88200 96000 192000
    bits [0x1f]: 8 16 20 24 32
    formats [0x1]: PCM
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x05 [Audio Output] wcaps 0x691: Stereo Digital
  Control: name="IEC958 Playback Con Mask", index=0, device=0
  Control: name="IEC958 Playback Pro Mask", index=0, device=0
  Control: name="IEC958 Playback Default", index=0, device=0
  Control: name="IEC958 Playback Switch", index=0, device=0
  Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
  Device: name="CA0132 Digital", type="SPDIF", device=1
  Converter: stream=0, channel=0
  Digital: Non-Copyright
  Digital category: 0x12
  IEC Coding Type: 0x0
  PCM:
    rates [0x1e0]: 44100 48000 88200 96000
    bits [0xa]: 16 24
    formats [0x5]: PCM AC3
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x06 [Audio Output] wcaps 0x691: Stereo Digital
  Converter: stream=0, channel=0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0x1e]: 16 20 24 32
    formats [0x5]: PCM AC3
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x07 [Audio Input] wcaps 0x10059b: Stereo Amp-In
  Control: name="Capture Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Device: name="CA0132 Analog", type="Audio", device=0
  Amp-In caps: ofs=0x5a, nsteps=0x63, stepsize=0x03, mute=1
  Amp-In vals:  [0x63 0x63]
  Converter: stream=1, channel=0
  SDI-Select: 0
  PCM:
    rates [0x1e4]: 16000 44100 48000 88200 96000
    bits [0xa]: 16 24
    formats [0x1]: PCM
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x12
Node 0x08 [Audio Input] wcaps 0x10059b: Stereo Amp-In
  Amp-In caps: ofs=0x5a, nsteps=0x63, stepsize=0x03, mute=1
  Amp-In vals:  [0x5a 0x5a]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x1e4]: 16000 44100 48000 88200 96000
    bits [0xa]: 16 24
    formats [0x1]: PCM
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x11
Node 0x09 [Audio Input] wcaps 0x100791: Stereo Digital
  Converter: stream=0, channel=0
  SDI-Select: 0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x1f0]: 32000 44100 48000 88200 96000
    bits [0xa]: 16 24
    formats [0x1]: PCM
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x0e
Node 0x0a [Audio Input] wcaps 0x10079b: Stereo Digital Amp-In
  Control: name="What U Hear Capture Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="What U Hear Capture Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Device: name="CA0132 What U Hear", type="Audio", device=2
  Amp-In caps: ofs=0x5a, nsteps=0x63, stepsize=0x03, mute=1
  Amp-In vals:  [0x5a 0x5a]
  Converter: stream=0, channel=0
  SDI-Select: 0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x1ec]: 16000 22050 44100 48000 88200 96000
    bits [0x1b]: 8 16 24 32
    formats [0x1]: PCM
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x13
Node 0x0b [Pin Complex] wcaps 0x400581: Stereo
  Pincap 0x00010014: OUT EAPD Detect
  EAPD 0x0:
  Pin Default 0x01014010: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Green
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=06, enabled=1
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x02
Node 0x0c [Pin Complex] wcaps 0x400701: Stereo Digital
  Pincap 0x00000010: OUT
  Pin Default 0x014580f0: [Jack] SPDIF Out at Ext Rear
    Conn = Optical, Color = Purple
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x40: OUT
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x05
Node 0x0d [Pin Complex] wcaps 0x400501: Stereo
  Pincap 0x00000010: OUT
  Pin Default 0x014570f0: [Jack] SPDIF Out at Ext Rear
    Conn = Optical, Color = Yellow
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x00:
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x06
Node 0x0e [Pin Complex] wcaps 0x400681: Stereo Digital
  Pincap 0x00000020: IN
  Pin Default 0x01c530f0: [Jack] SPDIF In at Ext Rear
    Conn = Optical, Color = Blue
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x0f [Pin Complex] wcaps 0x400581: Stereo
  Pincap 0x0000001c: OUT HP Detect
  Pin Default 0x0221401f: [Jack] HP Out at Ext Front
    Conn = 1/8, Color = Green
    DefAssociation = 0x1, Sequence = 0xf
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x02
Node 0x10 [Pin Complex] wcaps 0x400581: Stereo
  Pincap 0x0000001c: OUT HP Detect
  Pin Default 0x02216011: [Jack] HP Out at Ext Front
    Conn = 1/8, Color = Orange
    DefAssociation = 0x1, Sequence = 0x1
  Pin-ctls: 0x00:
  Unsolicited: tag=04, enabled=1
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x03
Node 0x11 [Pin Complex] wcaps 0x40058b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00003734: IN OUT Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x02012014: [Jack] Line Out at Ext Front
    Conn = 1/8, Color = Grey
    DefAssociation = 0x1, Sequence = 0x4
  Pin-ctls: 0x40: OUT VREF_HIZ
  Unsolicited: tag=01, enabled=1
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x04
Node 0x12 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x27, mute=0
  Amp-In vals:  [0x01 0x00]
  Pincap 0x00003724: IN Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x37a791f0: [Jack] Mic at Oth Mobile-In
    Conn = Analog, Color = Pink
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=02, enabled=1
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x13 [Pin Complex] wcaps 0x400681: Stereo Digital
  Pincap 0x00000020: IN
  Pin Default 0x908700f0: [Fixed] Line In at Int N/A
    Conn = Analog, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x14 [Beep Generator Widget] wcaps 0x70040c: Mono Amp-Out
  Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-Out vals:  [0x1c]
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x15 [Vendor Defined Widget] wcaps 0xf00600: Mono Digital
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x16 [Vendor Defined Widget] wcaps 0xf00680: Mono Digital
  Unsolicited: tag=03, enabled=1
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x17 [Audio Output] wcaps 0x49d: Stereo Amp-Out
  Amp-Out caps: ofs=0x5a, nsteps=0x63, stepsize=0x03, mute=1
  Amp-Out vals:  [0x5a 0x5a]
  Converter: stream=0, channel=0
  PCM:
    rates [0x5ec]: 16000 22050 44100 48000 88200 96000 192000
    bits [0x1f]: 8 16 20 24 32
    formats [0x1]: PCM
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x18 [Pin Complex] wcaps 0x400581: Stereo
  Pincap 0x00000010: OUT
  Pin Default 0x500000f0: [N/A] Line Out at Int N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x17
Codec: ATI R6xx HDMI
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x1002aa01
Subsystem Id: 0x00aa0100
Revision Id: 0x100a00
No Modem Function Group found
Default PCM:
    rates [0x70]: 32000 44100 48000
    bits [0x2]: 16
    formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
  Power states:  D0 D3 CLKSTOP EPSS
  Power: setting=D0, actual=D0, Clock-stop-OK
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x221: Stereo Digital Stripe
  Converter: stream=0, channel=0
  Digital: Enabled
  Digital category: 0x0
  IEC Coding Type: 0x0
Node 0x03 [Pin Complex] wcaps 0x400381: Stereo Digital
  Pincap 0x00000094: OUT Detect HDMI
  Pin Default 0x185600f0: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x02
Node 0x04 [Audio Output] wcaps 0x221: Stereo Digital Stripe
  Converter: stream=0, channel=0
  Digital: Enabled
  Digital category: 0x0
  IEC Coding Type: 0x0
Node 0x05 [Pin Complex] wcaps 0x400381: Stereo Digital
  Pincap 0x00000094: OUT Detect HDMI
  Pin Default 0x185600f0: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x04
Node 0x06 [Audio Output] wcaps 0x221: Stereo Digital Stripe
  Converter: stream=0, channel=0
  Digital: Enabled
  Digital category: 0x0
  IEC Coding Type: 0x0
Node 0x07 [Pin Complex] wcaps 0x400381: Stereo Digital
  Pincap 0x00000094: OUT Detect HDMI
  Pin Default 0x185600f0: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x06
Node 0x08 [Audio Output] wcaps 0x221: Stereo Digital Stripe
  Converter: stream=0, channel=0
  Digital: Enabled
  Digital category: 0x0
  IEC Coding Type: 0x0
Node 0x09 [Pin Complex] wcaps 0x400381: Stereo Digital
  Pincap 0x00000094: OUT Detect HDMI
  Pin Default 0x185600f0: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x08
Codec: Realtek ALC1220
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec1220
Subsystem Id: 0x18492221
Revision Id: 0x100101
No Modem Function Group found
Default PCM:
    rates [0x5f0]: 32000 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
  Power states:  D0 D1 D2 D3 D3cold CLKSTOP EPSS
  Power: setting=D0, actual=D0
GPIO: io=8, o=0, i=0, unsolicited=1, wake=0
  IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Control: name="Front Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Device: name="ALC1220 Analog", type="Audio", device=0
  Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
  Amp-Out vals:  [0x3c 0x3c]
  Converter: stream=0, channel=0
  PCM:
    rates [0x7e0]: 44100 48000 88200 96000 176400 192000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Control: name="Surround Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
  Amp-Out vals:  [0x3c 0x3c]
  Converter: stream=0, channel=0
  PCM:
    rates [0x7e0]: 44100 48000 88200 96000 176400 192000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Control: name="Center Playback Volume", index=0, device=0
    ControlAmp: chs=1, dir=Out, idx=0, ofs=0
  Control: name="LFE Playback Volume", index=0, device=0
    ControlAmp: chs=2, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
  Amp-Out vals:  [0x3c 0x3c]
  Converter: stream=0, channel=0
  PCM:
    rates [0x7e0]: 44100 48000 88200 96000 176400 192000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x05 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Control: name="Headphone Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
  Amp-Out vals:  [0x3c 0x3c]
  Converter: stream=0, channel=0
  PCM:
    rates [0x7e0]: 44100 48000 88200 96000 176400 192000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital
  Control: name="IEC958 Playback Con Mask", index=0, device=0
  Control: name="IEC958 Playback Pro Mask", index=0, device=0
  Control: name="IEC958 Playback Default", index=0, device=0
  Control: name="IEC958 Playback Switch", index=0, device=0
  Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
  Device: name="ALC1220 Digital", type="SPDIF", device=1
  Converter: stream=0, channel=0
  Digital: Enabled
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x5f0]: 32000 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Control: name="Capture Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Capture Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Device: name="ALC1220 Analog", type="Audio", device=0
  Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
  Amp-In vals:  [0x27 0x27]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x7e0]: 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x23
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Control: name="Capture Volume", index=1, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Capture Switch", index=1, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Device: name="ALC1220 Alt Analog", type="Audio", device=2
  Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
  Amp-In vals:  [0x80 0x80]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x7e0]: 44100 48000 88200 96000 176400 192000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Control: name="Rear Mic Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Rear Mic Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Front Mic Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=1, ofs=0
  Control: name="Front Mic Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=1, ofs=0
  Control: name="Line Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Control: name="Line Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 8
     0x18 0x19 0x1a 0x1b 0x1d 0x15 0x16 0x17
Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80]
  Connection: 2
     0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80]
  Connection: 2
     0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80]
  Connection: 2
     0x04 0x0b
Node 0x0f [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80]
  Connection: 2
     0x05 0x0b
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00000020: IN
  Pin Default 0x40000500: [N/A] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Control: name="Front Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0001001c: OUT HP EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x01014010: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Green
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=05, enabled=1
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x0c
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Control: name="Surround Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x00000034: IN OUT Detect
  Pin Default 0x01011012: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0x1, Sequence = 0x2
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=06, enabled=1
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x0d
Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Control: name="Center Playback Switch", index=0, device=0
    ControlAmp: chs=1, dir=Out, idx=0, ofs=0
  Control: name="LFE Playback Switch", index=0, device=0
    ControlAmp: chs=2, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x00000034: IN OUT Detect
  Pin Default 0x01016011: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Orange
    DefAssociation = 0x1, Sequence = 0x1
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=07, enabled=1
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x0e
Node 0x17 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00000034: IN OUT Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x0f
Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
  Control: name="Rear Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00003734: IN OUT Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x01a19040: [Jack] Mic at Ext Rear
    Conn = 1/8, Color = Pink
    DefAssociation = 0x4, Sequence = 0x0
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=02, enabled=1
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x19 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
  Control: name="Front Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000373c: IN OUT HP Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x02a19050: [Jack] Mic at Ext Front
    Conn = 1/8, Color = Pink
    DefAssociation = 0x5, Sequence = 0x0
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=03, enabled=1
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1a [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
  Control: name="Line Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00003734: IN OUT Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x0181304f: [Jack] Line In at Ext Rear
    Conn = 1/8, Color = Blue
    DefAssociation = 0x4, Sequence = 0xf
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=04, enabled=1
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
  Control: name="Headphone Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0001373c: IN OUT HP EAPD Detect
    Vref caps: HIZ 50 GRD 80 100
  EAPD 0x2: EAPD
  Pin Default 0x02214020: [Jack] HP Out at Ext Front
    Conn = 1/8, Color = Green
    DefAssociation = 0x2, Sequence = 0x0
  Pin-ctls: 0xc0: OUT HP VREF_HIZ
  Unsolicited: tag=01, enabled=1
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 5
     0x0c 0x0d 0x0e 0x0f* 0x26
Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1d [Pin Complex] wcaps 0x400400: Mono
  Pincap 0x00000020: IN
  Pin Default 0x4047e629: [N/A] SPDIF Out at Ext N/A
    Conn = Analog, Color = White
    DefAssociation = 0x2, Sequence = 0x9
  Pin-ctls: 0x20: IN
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital
  Pincap 0x00000010: OUT
  Pin Default 0x01451130: [Jack] SPDIF Out at Ext Rear
    Conn = Optical, Color = Black
    DefAssociation = 0x3, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
  Processing caps: benign=0, ncoeff=127
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 10
     0x18 0x19 0x1a 0x1b 0x1d 0x15 0x16 0x17 0x12 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 10
     0x18 0x19 0x1a 0x1b 0x1d 0x15 0x16 0x17 0x12 0x0b
Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x25 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
  Amp-Out vals:  [0x57 0x57]
  Converter: stream=0, channel=0
  PCM:
    rates [0x7e0]: 44100 48000 88200 96000 176400 192000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x26 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80]
  Connection: 2
     0x25 0x0b

:

Wenn ich den Puck aus der Soundkarte entferne, habe ich Sound über die Lautsprecher! Wenn ich allerdings die Kopfhörer direkt an die Soundkarte anschließe (ohne Puck) ist das Problem das Selbe wie mit Puck.

Maranto schrieb:

Dann ist hier noch eine Einstellung:

Simple mixer control 'HP/Speaker Auto Detect',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]

Momentan auf Automatic. Schalte das mal aus und testen.

Das müsstest du mir nochmal erklären!

Erfolg!

Im Alsamixer gibt eine Option HP/Speaker Auto detect. Mit den Pfeiltasten konnte ich da nie was machen, daher nahm ich an dass es keine Rolle spielt.

Nun habe ich nochmal Gemini eine sepzifische Frage bezüglich der "headphone detection" gestellt, und siehe da: man muss nicht (wie bei den anderen Reglern) mit den Pfeiltasten sondern mit "M" (wohl für mute?) arbeiten! Wenn ich das mute (Anzeige ist dann auf "MM"), kann ich problemlos zwischen den Modi hin - und herschalten, man hört dann auch das Umschalten des Relais im PC und ich habe Sound über die Lautsprecher!

Vielen Dank Maranto für deine Zeit und Mühe!